summaryrefslogtreecommitdiff
path: root/board/davinci/da8xxevm
diff options
context:
space:
mode:
authorChristian Riesch <christian.riesch@omicron.at>2013-06-14 14:22:36 +0200
committerTom Rini <trini@ti.com>2013-07-26 16:39:10 -0400
commit3864cb2133b8d4a45dbad603f7b0b9f051d617ff (patch)
tree57787024093fc02a3ddebe979747d8732ca1bae5 /board/davinci/da8xxevm
parentbf0e86606df37e3344b14d12e58aa8799a15fe37 (diff)
downloadu-boot-imx-3864cb2133b8d4a45dbad603f7b0b9f051d617ff.zip
u-boot-imx-3864cb2133b8d4a45dbad603f7b0b9f051d617ff.tar.gz
u-boot-imx-3864cb2133b8d4a45dbad603f7b0b9f051d617ff.tar.bz2
da850evm: Use clrbits function with correct endianess
The current code uses clrbits_be32 which is incorrect since we are on a little endian machine here. This patch fixes this issue and also removes some unnecessary code: Reading the current GPIO bank state is not required if we are using the SET and CLEAR GPIO registers for setting/clearing bits. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Nagabhushana Netagunte <nagabhushana.netagunte@ti.com> Cc: Rajashekhara, Sudhakar <sudhakar.raj@ti.com>
Diffstat (limited to 'board/davinci/da8xxevm')
-rw-r--r--board/davinci/da8xxevm/da850evm.c14
1 files changed, 3 insertions, 11 deletions
diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
index 01745b2..85b4830 100644
--- a/board/davinci/da8xxevm/da850evm.c
+++ b/board/davinci/da8xxevm/da850evm.c
@@ -323,10 +323,6 @@ int board_early_init_f(void)
int board_init(void)
{
-#if defined(CONFIG_USE_NOR) || defined(CONFIG_DAVINCI_MMC)
- u32 val;
-#endif
-
#ifndef CONFIG_USE_IRQ
irq_init();
#endif
@@ -366,12 +362,10 @@ int board_init(void)
#ifdef CONFIG_USE_NOR
/* Set the GPIO direction as output */
- clrbits_be32((u32 *)GPIO_BANK0_REG_DIR_ADDR, (0x01 << 11));
+ clrbits_le32((u32 *)GPIO_BANK0_REG_DIR_ADDR, (0x01 << 11));
/* Set the output as low */
- val = readl(GPIO_BANK0_REG_SET_ADDR);
- val |= (0x01 << 11);
- writel(val, GPIO_BANK0_REG_CLR_ADDR);
+ writel(0x01 << 11, GPIO_BANK0_REG_CLR_ADDR);
#endif
#ifdef CONFIG_DAVINCI_MMC
@@ -379,9 +373,7 @@ int board_init(void)
clrbits_le32((u32 *)GPIO_BANK0_REG_DIR_ADDR, (0x01 << 11));
/* Set the output as high */
- val = readl(GPIO_BANK0_REG_SET_ADDR);
- val |= (0x01 << 11);
- writel(val, GPIO_BANK0_REG_SET_ADDR);
+ writel(0x01 << 11, GPIO_BANK0_REG_SET_ADDR);
#endif
#ifdef CONFIG_DRIVER_TI_EMAC