summaryrefslogtreecommitdiff
path: root/board/atmel
diff options
context:
space:
mode:
authorStelian Pop <stelian@popies.net>2008-03-26 20:52:32 +0100
committerJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>2008-04-01 01:45:50 +0200
commit983c1db04c1dd0f92e02f06d29f0c65a3d9a2687 (patch)
tree59c4e30276a49cf468cdea9a9ef2b6258238acb6 /board/atmel
parent177e8a5ac81bbc531a1d54abdb47f2860266c3aa (diff)
downloadu-boot-imx-983c1db04c1dd0f92e02f06d29f0c65a3d9a2687.zip
u-boot-imx-983c1db04c1dd0f92e02f06d29f0c65a3d9a2687.tar.gz
u-boot-imx-983c1db04c1dd0f92e02f06d29f0c65a3d9a2687.tar.bz2
Port AT91CAP9 to the new headers
Adapt the existing AT91CAP9 code to the new headers and APIs. Signed-off-by: Stelian Pop <stelian@popies.net>
Diffstat (limited to 'board/atmel')
-rw-r--r--board/atmel/at91cap9adk/at91cap9adk.c231
-rw-r--r--board/atmel/at91cap9adk/led.c43
-rw-r--r--board/atmel/at91cap9adk/nand.c8
3 files changed, 136 insertions, 146 deletions
diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
index 52e62de..24861ba 100644
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ b/board/atmel/at91cap9adk/at91cap9adk.c
@@ -23,7 +23,13 @@
*/
#include <common.h>
-#include <asm/arch/AT91CAP9.h>
+#include <asm/arch/at91cap9.h>
+#include <asm/arch/at91cap9_matrix.h>
+#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
#include <net.h>
#endif
@@ -40,126 +46,106 @@ DECLARE_GLOBAL_DATA_PTR;
static void at91cap9_serial_hw_init(void)
{
#ifdef CONFIG_USART0
- AT91C_BASE_PIOA->PIO_PDR = AT91C_PA22_TXD0 | AT91C_PA23_RXD0;
- AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_US0;
+ at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
#endif
#ifdef CONFIG_USART1
- AT91C_BASE_PIOD->PIO_PDR = AT91C_PD0_TXD1 | AT91C_PD1_RXD1;
- AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_US1;
+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
#endif
#ifdef CONFIG_USART2
- AT91C_BASE_PIOD->PIO_PDR = AT91C_PD2_TXD2 | AT91C_PD3_RXD2;
- AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_US2;
+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
#endif
#ifdef CONFIG_USART3 /* DBGU */
- AT91C_BASE_PIOC->PIO_PDR = AT91C_PC31_DTXD | AT91C_PC30_DRXD;
- AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SYS;
+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
#endif
-
-
}
static void at91cap9_nor_hw_init(void)
{
- /* Ensure EBI supply is 3.3V */
- AT91C_BASE_CCFG->CCFG_EBICSA |= AT91C_EBI_SUP_3V3;
+ unsigned long csa;
+ /* Ensure EBI supply is 3.3V */
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA,
+ csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
/* Configure SMC CS0 for parallel flash */
- AT91C_BASE_SMC->SMC_SETUP0 = AT91C_FLASH_NWE_SETUP |
- AT91C_FLASH_NCS_WR_SETUP |
- AT91C_FLASH_NRD_SETUP |
- AT91C_FLASH_NCS_RD_SETUP;
-
- AT91C_BASE_SMC->SMC_PULSE0 = AT91C_FLASH_NWE_PULSE |
- AT91C_FLASH_NCS_WR_PULSE |
- AT91C_FLASH_NRD_PULSE |
- AT91C_FLASH_NCS_RD_PULSE;
-
- AT91C_BASE_SMC->SMC_CYCLE0 = AT91C_FLASH_NWE_CYCLE |
- AT91C_FLASH_NRD_CYCLE;
-
- AT91C_BASE_SMC->SMC_CTRL0 = AT91C_SMC_READMODE |
- AT91C_SMC_WRITEMODE |
- AT91C_SMC_NWAITM_NWAIT_DISABLE |
- AT91C_SMC_BAT_BYTE_WRITE |
- AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS |
- (AT91C_SMC_TDF & (1 << 16));
+ at91_sys_write(AT91_SMC_SETUP(0),
+ AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2) |
+ AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2));
+ at91_sys_write(AT91_SMC_PULSE(0),
+ AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10) |
+ AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10));
+ at91_sys_write(AT91_SMC_CYCLE(0),
+ AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
+ at91_sys_write(AT91_SMC_MODE(0),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE |
+ AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
}
#ifdef CONFIG_CMD_NAND
static void at91cap9_nand_hw_init(void)
{
+ unsigned long csa;
+
/* Enable CS3 */
- AT91C_BASE_CCFG->CCFG_EBICSA |= AT91C_EBI_CS3A_SM | AT91C_EBI_SUP_3V3;
+ csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ at91_sys_write(AT91_MATRIX_EBICSA,
+ csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA |
+ AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
/* Configure SMC CS3 for NAND/SmartMedia */
- AT91C_BASE_SMC->SMC_SETUP3 = AT91C_SM_NWE_SETUP |
- AT91C_SM_NCS_WR_SETUP |
- AT91C_SM_NRD_SETUP |
- AT91C_SM_NCS_RD_SETUP;
-
- AT91C_BASE_SMC->SMC_PULSE3 = AT91C_SM_NWE_PULSE |
- AT91C_SM_NCS_WR_PULSE |
- AT91C_SM_NRD_PULSE |
- AT91C_SM_NCS_RD_PULSE;
-
- AT91C_BASE_SMC->SMC_CYCLE3 = AT91C_SM_NWE_CYCLE |
- AT91C_SM_NRD_CYCLE;
-
- AT91C_BASE_SMC->SMC_CTRL3 = AT91C_SMC_READMODE |
- AT91C_SMC_WRITEMODE |
- AT91C_SMC_NWAITM_NWAIT_DISABLE |
- AT91C_SMC_DBW_WIDTH_EIGTH_BITS |
- AT91C_SM_TDF;
-
- AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_PIOABCD;
+ at91_sys_write(AT91_SMC_SETUP(3),
+ AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1) |
+ AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
+ at91_sys_write(AT91_SMC_PULSE(3),
+ AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6) |
+ AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
+ at91_sys_write(AT91_SMC_CYCLE(3),
+ AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
+ at91_sys_write(AT91_SMC_MODE(3),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
+ AT91_SMC_DBW_8 | AT91_SMC_TDF_(1));
+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD);
/* RDY/BSY is not connected */
/* Enable NandFlash */
- AT91C_BASE_PIOD->PIO_PER = AT91C_PIO_PD15;
- AT91C_BASE_PIOD->PIO_OER = AT91C_PIO_PD15;
+ at91_set_gpio_output(AT91_PIN_PD15, 1);
}
#endif
#ifdef CONFIG_HAS_DATAFLASH
static void at91cap9_spi_hw_init(void)
{
- AT91C_BASE_PIOD->PIO_BSR = AT91C_PD0_SPI0_NPCS2D |
- AT91C_PD1_SPI0_NPCS3D;
- AT91C_BASE_PIOD->PIO_PDR = AT91C_PD0_SPI0_NPCS2D |
- AT91C_PD1_SPI0_NPCS3D;
-
- AT91C_BASE_PIOA->PIO_ASR = AT91C_PA28_SPI0_NPCS3A;
- AT91C_BASE_PIOA->PIO_BSR = AT91C_PA4_SPI0_NPCS2A |
- AT91C_PA1_SPI0_MOSI |
- AT91C_PA0_SPI0_MISO |
- AT91C_PA3_SPI0_NPCS1 |
- AT91C_PA5_SPI0_NPCS0 |
- AT91C_PA2_SPI0_SPCK;
- AT91C_BASE_PIOA->PIO_PDR = AT91C_PA28_SPI0_NPCS3A |
- AT91C_PA4_SPI0_NPCS2A |
- AT91C_PA1_SPI0_MOSI |
- AT91C_PA0_SPI0_MISO |
- AT91C_PA3_SPI0_NPCS1 |
- AT91C_PA5_SPI0_NPCS0 |
- AT91C_PA2_SPI0_SPCK;
-
- /* Enable Clock */
- AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI0;
+ at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */
+
+ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
+
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_SPI0);
}
#endif
#ifdef CONFIG_MACB
static void at91cap9_macb_hw_init(void)
{
- unsigned int gpio;
-
/* Enable clock */
- AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_EMAC;
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_EMAC);
/*
* Disable pull-up on:
@@ -169,54 +155,59 @@ static void at91cap9_macb_hw_init(void)
*
* PHY has internal pull-down
*/
- AT91C_BASE_PIOB->PIO_PPUDR = AT91C_PB22_E_RXDV |
- AT91C_PB25_E_RX0 |
- AT91C_PB26_E_RX1;
+ writel(pin_to_mask(AT91_PIN_PB22) |
+ pin_to_mask(AT91_PIN_PB25) |
+ pin_to_mask(AT91_PIN_PB26),
+ pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
/* Need to reset PHY -> 500ms reset */
- AT91C_BASE_RSTC->RSTC_RMR = (AT91C_RSTC_KEY & (0xA5 << 24)) |
- (AT91C_RSTC_ERSTL & (0x0D << 8)) |
- AT91C_RSTC_URSTEN;
- AT91C_BASE_RSTC->RSTC_RCR = (AT91C_RSTC_KEY & (0xA5 << 24)) |
- AT91C_RSTC_EXTRST;
+ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+ AT91_RSTC_ERSTL | (0x0D << 8) |
+ AT91_RSTC_URSTEN);
+
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
/* Wait for end hardware reset */
- while (!(AT91C_BASE_RSTC->RSTC_RSR & AT91C_RSTC_NRSTL));
+ while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
/* Re-enable pull-up */
- AT91C_BASE_PIOB->PIO_PPUER = AT91C_PB22_E_RXDV |
- AT91C_PB25_E_RX0 |
- AT91C_PB26_E_RX1;
-
-#ifdef CONFIG_RMII
- gpio = AT91C_PB30_E_MDIO |
- AT91C_PB29_E_MDC |
- AT91C_PB21_E_TXCK |
- AT91C_PB27_E_RXER |
- AT91C_PB25_E_RX0 |
- AT91C_PB22_E_RXDV |
- AT91C_PB26_E_RX1 |
- AT91C_PB28_E_TXEN |
- AT91C_PB23_E_TX0 |
- AT91C_PB24_E_TX1;
- AT91C_BASE_PIOB->PIO_ASR = gpio;
- AT91C_BASE_PIOB->PIO_BSR = 0;
- AT91C_BASE_PIOB->PIO_PDR = gpio;
-#else
-#error AT91CAP9A-DK works only in RMII mode
+ writel(pin_to_mask(AT91_PIN_PB22) |
+ pin_to_mask(AT91_PIN_PB25) |
+ pin_to_mask(AT91_PIN_PB26),
+ pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
+
+ at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */
+ at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */
+
+#ifndef CONFIG_RMII
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
#endif
-
/* Unlock EMAC, 3 0 2 1 sequence */
#define MP_MAC_KEY0 0x5969cb2a
#define MP_MAC_KEY1 0xb4a1872e
#define MP_MAC_KEY2 0x05683fbc
#define MP_MAC_KEY3 0x3634fba4
#define UNLOCK_MAC 0x00000008
- *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x3c)) = MP_MAC_KEY3;
- *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x30)) = MP_MAC_KEY0;
- *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x38)) = MP_MAC_KEY2;
- *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x34)) = MP_MAC_KEY1;
- *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x40)) = UNLOCK_MAC;
+ writel(MP_MAC_KEY3, MP_BLOCK_3_BASE + 0x3c);
+ writel(MP_MAC_KEY0, MP_BLOCK_3_BASE + 0x30);
+ writel(MP_MAC_KEY2, MP_BLOCK_3_BASE + 0x38);
+ writel(MP_MAC_KEY1, MP_BLOCK_3_BASE + 0x34);
+ writel(UNLOCK_MAC, MP_BLOCK_3_BASE + 0x40);
}
#endif
@@ -229,11 +220,11 @@ static void at91cap9_uhp_hw_init(void)
#define MP_OHCI_KEY2 0x4823efbc
#define MP_OHCI_KEY3 0x8651aae4
#define UNLOCK_OHCI 0x00000010
- *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x3c)) = MP_OHCI_KEY3;
- *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x38)) = MP_OHCI_KEY2;
- *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x30)) = MP_OHCI_KEY0;
- *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x34)) = MP_OHCI_KEY1;
- *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x40)) = UNLOCK_OHCI;
+ writel(MP_OHCI_KEY3, MP_BLOCK_3_BASE + 0x3c);
+ writel(MP_OHCI_KEY2, MP_BLOCK_3_BASE + 0x38);
+ writel(MP_OHCI_KEY0, MP_BLOCK_3_BASE + 0x30);
+ writel(MP_OHCI_KEY1, MP_BLOCK_3_BASE + 0x34);
+ writel(UNLOCK_OHCI, MP_BLOCK_3_BASE + 0x40);
}
#endif
diff --git a/board/atmel/at91cap9adk/led.c b/board/atmel/at91cap9adk/led.c
index 8588a91..04de139 100644
--- a/board/atmel/at91cap9adk/led.c
+++ b/board/atmel/at91cap9adk/led.c
@@ -23,58 +23,55 @@
*/
#include <common.h>
-#include <asm/arch/AT91CAP9.h>
+#include <asm/arch/at91cap9.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
-#define RED_LED AT91C_PIO_PC29 /* this is the power led */
-#define GREEN_LED AT91C_PIO_PA10 /* this is the user1 led */
-#define YELLOW_LED AT91C_PIO_PA11 /* this is the user1 led */
+#define RED_LED AT91_PIN_PC29 /* this is the power led */
+#define GREEN_LED AT91_PIN_PA10 /* this is the user1 led */
+#define YELLOW_LED AT91_PIN_PA11 /* this is the user1 led */
void red_LED_on(void)
{
- AT91C_BASE_PIOC->PIO_SODR = RED_LED;
+ at91_set_gpio_value(RED_LED, 1);
}
void red_LED_off(void)
{
- AT91C_BASE_PIOC->PIO_CODR = RED_LED;
+ at91_set_gpio_value(RED_LED, 0);
}
void green_LED_on(void)
{
- AT91C_BASE_PIOA->PIO_CODR = GREEN_LED;
+ at91_set_gpio_value(GREEN_LED, 0);
}
void green_LED_off(void)
{
- AT91C_BASE_PIOA->PIO_SODR = GREEN_LED;
+ at91_set_gpio_value(GREEN_LED, 1);
}
void yellow_LED_on(void)
{
- AT91C_BASE_PIOA->PIO_CODR = YELLOW_LED;
+ at91_set_gpio_value(YELLOW_LED, 0);
}
void yellow_LED_off(void)
{
- AT91C_BASE_PIOA->PIO_SODR = YELLOW_LED;
+ at91_set_gpio_value(YELLOW_LED, 1);
}
void coloured_LED_init(void)
{
/* Enable clock */
- AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_PIOABCD;
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD);
- /* Disable peripherals on LEDs */
- AT91C_BASE_PIOA->PIO_PER = GREEN_LED | YELLOW_LED;
- /* Enable pins as outputs */
- AT91C_BASE_PIOA->PIO_OER = GREEN_LED | YELLOW_LED;
- /* Turn all LEDs OFF */
- AT91C_BASE_PIOA->PIO_SODR = GREEN_LED | YELLOW_LED;
+ at91_set_gpio_output(RED_LED, 1);
+ at91_set_gpio_output(GREEN_LED, 1);
+ at91_set_gpio_output(YELLOW_LED, 1);
- /* Disable peripherals on LEDs */
- AT91C_BASE_PIOC->PIO_PER = RED_LED;
- /* Enable pins as outputs */
- AT91C_BASE_PIOC->PIO_OER = RED_LED;
- /* Turn all LEDs OFF */
- AT91C_BASE_PIOC->PIO_CODR = RED_LED;
+ at91_set_gpio_output(RED_LED, 0);
+ at91_set_gpio_output(GREEN_LED, 1);
+ at91_set_gpio_output(YELLOW_LED, 1);
}
diff --git a/board/atmel/at91cap9adk/nand.c b/board/atmel/at91cap9adk/nand.c
index 2f02126..1277973 100644
--- a/board/atmel/at91cap9adk/nand.c
+++ b/board/atmel/at91cap9adk/nand.c
@@ -25,7 +25,9 @@
*/
#include <common.h>
-#include <asm/arch/hardware.h>
+#include <asm/arch/at91cap9.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_pio.h>
#ifdef CONFIG_CMD_NAND
@@ -51,10 +53,10 @@ static void at91cap9adk_nand_hwcontrol(struct mtd_info *mtd, int cmd)
IO_ADDR_W |= MASK_ALE;
break;
case NAND_CTL_CLRNCE:
- AT91C_BASE_PIOD->PIO_SODR = AT91C_PIO_PD15;
+ at91_set_gpio_value(AT91_PIN_PD15, 1);
break;
case NAND_CTL_SETNCE:
- AT91C_BASE_PIOD->PIO_CODR = AT91C_PIO_PD15;
+ at91_set_gpio_value(AT91_PIN_PD15, 0);
break;
}
this->IO_ADDR_W = (void *) IO_ADDR_W;