board: amlogic: Rename folder for Amlogic boards

s/hardkernel/amlogic/ to have a single place for all the amlogic-based
boards.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Acked-by: Beniamino Galvani <b.galvani@gmail.com>

1 files changed, 67 insertions, 0 deletions

diff --git a/board/amlogic/odroid-c2/odroid-c2.c b/board/amlogic/odroid-c2/odroid-c2.c
new file mode 100644
index 0000000..bd72100
--- /dev/null
+++ b/board/amlogic/odroid-c2/odroid-c2.c
@@ -0,0 +1,67 @@
+/*
+ * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/gxbb.h>
+#include <asm/arch/sm.h>
+#include <dm/platdata.h>
+#include <phy.h>
+
+#define EFUSE_SN_OFFSET		20
+#define EFUSE_SN_SIZE		16
+#define EFUSE_MAC_OFFSET	52
+#define EFUSE_MAC_SIZE		6
+
+int board_init(void)
+{
+	return 0;
+}
+
+static const struct eth_pdata gxbb_eth_pdata = {
+	.iobase = GXBB_ETH_BASE,
+	.phy_interface = PHY_INTERFACE_MODE_RGMII,
+};
+
+U_BOOT_DEVICE(meson_eth) = {
+	.name = "eth_designware",
+	.platdata = &gxbb_eth_pdata,
+};
+
+int misc_init_r(void)
+{
+	u8 mac_addr[EFUSE_MAC_SIZE];
+	ssize_t len;
+
+	/* Select Ethernet function */
+	setbits_le32(GXBB_PINMUX(6), 0x3fff);
+
+	/* Set RGMII mode */
+	setbits_le32(GXBB_ETH_REG_0, GXBB_ETH_REG_0_PHY_INTF |
+				     GXBB_ETH_REG_0_TX_PHASE(1) |
+				     GXBB_ETH_REG_0_TX_RATIO(4) |
+				     GXBB_ETH_REG_0_PHY_CLK_EN |
+				     GXBB_ETH_REG_0_CLK_EN);
+
+	/* Enable power and clock gate */
+	setbits_le32(GXBB_GCLK_MPEG_1, GXBB_GCLK_MPEG_1_ETH);
+	clrbits_le32(GXBB_MEM_PD_REG_0, GXBB_MEM_PD_REG_0_ETH_MASK);
+
+	/* Reset PHY on GPIOZ_14 */
+	clrbits_le32(GXBB_GPIO_EN(3), BIT(14));
+	clrbits_le32(GXBB_GPIO_OUT(3), BIT(14));
+	mdelay(10);
+	setbits_le32(GXBB_GPIO_OUT(3), BIT(14));
+
+	if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
+		len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
+					  mac_addr, EFUSE_MAC_SIZE);
+		if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr))
+			eth_setenv_enetaddr("ethaddr", mac_addr);
+	}
+
+	return 0;
+}