rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

5 files changed, 24 insertions, 24 deletions

diff --git a/board/amcc/ocotea/config.mk b/board/amcc/ocotea/config.mk
index 9e18335..b62e776 100644
--- a/board/amcc/ocotea/config.mk
+++ b/board/amcc/ocotea/config.mk
@@ -40,5 +40,5 @@ PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
 ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
diff --git a/board/amcc/ocotea/flash.c b/board/amcc/ocotea/flash.c
index 46c6946..a83f93a 100644
--- a/board/amcc/ocotea/flash.c
+++ b/board/amcc/ocotea/flash.c
@@ -53,9 +53,9 @@
 #define     FLASH_ONBD_N_VAL        2
 #define     FLASH_SRAM_SEL_VAL      1
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips        */
 
-static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+static unsigned long flash_addr_table[8][CONFIG_SYS_MAX_FLASH_BANKS] = {
 	{0xFF800000, 0xFF880000, 0xFFC00000},	/* 0:000: configuraton 4 */
 	{0xFF900000, 0xFF980000, 0xFFC00000},	/* 1:001: configuraton 3 */
 	{0x00000000, 0x00000000, 0x00000000},	/* 2:010: configuraton 8 */
@@ -83,8 +83,8 @@ static int write_word(flash_info_t * info, ulong dest, ulong data);
 unsigned long flash_init(void)
 {
 	unsigned long total_b = 0;
-	unsigned long size_b[CFG_MAX_FLASH_BANKS];
-	unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
+	unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
+	unsigned char *fpga_base = (unsigned char *)CONFIG_SYS_FPGA_BASE;
 	unsigned char switch_status;
 	unsigned short index = 0;
 	int i;
@@ -107,7 +107,7 @@ unsigned long flash_init(void)
 	DEBUGF("FLASH: Index: %d\n", index);
 
 	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
 		flash_info[i].sector_count = -1;
 		flash_info[i].size = 0;
@@ -131,8 +131,8 @@ unsigned long flash_init(void)
 		}
 
 		/* Monitor protection ON by default */
-		(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
-				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+				    CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
 				    &flash_info[i]);
 #ifdef CONFIG_ENV_IS_IN_FLASH
 		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
diff --git a/board/amcc/ocotea/init.S b/board/amcc/ocotea/init.S
index d211c71..8bcfbb1 100644
--- a/board/amcc/ocotea/init.S
+++ b/board/amcc/ocotea/init.S
@@ -49,9 +49,9 @@ tlbtab:
 	 * routine.
 	 */
 
-	tlbentry(CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X)
-	tlbentry(CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X)
-	tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I)
-	tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X)
+	tlbentry(CONFIG_SYS_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X)
+	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I)
 	tlbtab_end
diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c
index 4d1d093..fe45408 100644
--- a/board/amcc/ocotea/ocotea.c
+++ b/board/amcc/ocotea/ocotea.c
@@ -42,7 +42,7 @@ void fpga_init (void);
 int board_early_init_f (void)
 {
 	unsigned long mfr;
-	unsigned char *fpga_base = (unsigned char *) CFG_FPGA_BASE;
+	unsigned char *fpga_base = (unsigned char *) CONFIG_SYS_FPGA_BASE;
 	unsigned char switch_status;
 	unsigned long cs0_base;
 	unsigned long cs0_size;
@@ -315,7 +315,7 @@ int pci_pre_init(struct pci_controller * hose )
  *	may not be sufficient for a given board.
  *
  ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
 void pci_target_init(struct pci_controller * hose )
 {
 	/*--------------------------------------------------------------------------+
@@ -330,7 +330,7 @@ void pci_target_init(struct pci_controller * hose )
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
 	 * options to not support sizes such as 128/256 MB.
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+	out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
 	out32r( PCIX0_PIM0LAH, 0 );
 	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
 
@@ -339,12 +339,12 @@ void pci_target_init(struct pci_controller * hose )
 	/*--------------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *--------------------------------------------------------------------------*/
-	out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+	out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+	out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
 
 	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
 
 
 /*************************************************************************
diff --git a/board/amcc/ocotea/ocotea.h b/board/amcc/ocotea/ocotea.h
index 95ce1fd..400852a 100644
--- a/board/amcc/ocotea/ocotea.h
+++ b/board/amcc/ocotea/ocotea.h
@@ -22,7 +22,7 @@
  */
 
 /* Board specific FPGA stuff ... */
-#define FPGA_REG0                       (CFG_FPGA_BASE + 0x00)
+#define FPGA_REG0                       (CONFIG_SYS_FPGA_BASE + 0x00)
 #define   FPGA_REG0_SSCG_MASK             0x80
 #define   FPGA_REG0_SSCG_DISABLE          0x00
 #define   FPGA_REG0_SSCG_ENABLE           0x80
@@ -48,7 +48,7 @@
 #define   FPGA_REG0_ONBOARD_FLASH_ENABLE  0x00
 #define   FPGA_REG0_ONBOARD_FLASH_DISABLE 0x02
 #define   FPGA_REG0_FLASH                 0x01
-#define FPGA_REG1                       (CFG_FPGA_BASE + 0x01)
+#define FPGA_REG1                       (CONFIG_SYS_FPGA_BASE + 0x01)
 #define   FPGA_REG1_9772_FSELFBX_MASK     0x80
 #define   FPGA_REG1_9772_FSELFBX_6        0x00
 #define   FPGA_REG1_9772_FSELFBX_10       0x80
@@ -71,7 +71,7 @@
 #define   FPGA_REG1_SOURCE_SSDIV1         0x05
 #define   FPGA_REG1_SOURCE_SSDIV2         0x06
 #define   FPGA_REG1_SOURCE_SSDIV4         0x07
-#define FPGA_REG2                       (CFG_FPGA_BASE + 0x02)
+#define FPGA_REG2                       (CONFIG_SYS_FPGA_BASE + 0x02)
 #define   FPGA_REG2_TC0                   0x80
 #define   FPGA_REG2_TC1                   0x40
 #define   FPGA_REG2_TC2                   0x20
@@ -82,7 +82,7 @@
 #define   FPGA_REG2_EXT_INTFACE_DISABLE   0x04
 #define   FPGA_REG2_SMII_RESET_DISABLE    0x02   /*Use on Ocotea pass 3 boards*/
 #define   FPGA_REG2_DEFAULT_UART1_N       0x01
-#define FPGA_REG3                       (CFG_FPGA_BASE + 0x03)
+#define FPGA_REG3                       (CONFIG_SYS_FPGA_BASE + 0x03)
 #define   FPGA_REG3_GIGABIT_RESET_DISABLE 0x80   /*Use on Ocotea pass 1 boards*/
 #define   FPGA_REG3_ENET_MASK1            0x70   /*Use on Ocotea pass 1 boards*/
 #define   FPGA_REG3_ENET_MASK2            0xF0   /*Use on Ocotea pass 2 boards*/
@@ -108,7 +108,7 @@
 #define   FPGA_REG3_STAT_LED4_DISAB       0x00
 #define   FPGA_REG3_STAT_LED2_DISAB       0x00
 #define   FPGA_REG3_STAT_LED1_DISAB       0x00
-#define FPGA_REG4                       (CFG_FPGA_BASE + 0x04)
+#define FPGA_REG4                       (CONFIG_SYS_FPGA_BASE + 0x04)
 #define   FPGA_REG4_GPHY_MODE10           0x80
 #define   FPGA_REG4_GPHY_MODE100          0x40
 #define   FPGA_REG4_GPHY_MODE1000         0x20