diff options
author | Wolfgang Denk <wd@denx.de> | 2007-03-21 23:11:22 +0100 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2007-03-21 23:11:22 +0100 |
commit | 40750952c7a325e4f3d95eed18af9791485a6199 (patch) | |
tree | 882e865fba2b8653b56eede41d2dcfb32f7e3dba /board/amcc/acadia/memory.c | |
parent | d5f4614c9350d9333e575100fb250aab774d0258 (diff) | |
parent | e6615ecf4eaf4dd52696934aed8f5c6474cfd286 (diff) | |
download | u-boot-imx-40750952c7a325e4f3d95eed18af9791485a6199.zip u-boot-imx-40750952c7a325e4f3d95eed18af9791485a6199.tar.gz u-boot-imx-40750952c7a325e4f3d95eed18af9791485a6199.tar.bz2 |
Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xx
Diffstat (limited to 'board/amcc/acadia/memory.c')
-rw-r--r-- | board/amcc/acadia/memory.c | 564 |
1 files changed, 564 insertions, 0 deletions
diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c new file mode 100644 index 0000000..0f1de71 --- /dev/null +++ b/board/amcc/acadia/memory.c @@ -0,0 +1,564 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> + +#define CRAM_BANK0_BASE 0x0 +#define CRAM_DIDR 0x00100000 +#define MICRON_MT45W8MW16BGX_CRAM_ID 0x1b431b43 +#define MICRON_MT45W8MW16BGX_CRAM_ID2 0x13431343 +#define MICRON_DIDR_VENDOR_ID 0x00030003 /* 00011b */ +#define CRAM_DIDR_VENDOR_ID_MASK 0x001f001f /* DIDR[4:0] */ +#define CRAM_DEVID_NOT_SUPPORTED 0x00000000 + +#define PSRAM_PASS 0x50415353 /* "PASS" */ +#define PSRAM_FAIL 0x4641494C /* "FAIL" */ + +static u32 is_cram_inited(void); +static u32 is_cram(void); +static long int cram_init(u32); +static void cram_bcr_write(u32); +void udelay (unsigned long); + +void sdram_init(void) +{ + volatile unsigned long spr_reg; + + /* + * If CRAM not initialized or CRAM looks initialized because this + * is after a warm reboot then set SPRG7 to indicate CRAM needs + * initialization. Note that CRAM is initialized by the SPI and + * NAND preloader. + */ + spr_reg = (volatile unsigned long) mfspr(SPRG6); + if ((is_cram_inited() != 1) || (spr_reg != LOAK_SPL)) { + mtspr(SPRG7, LOAK_NONE); /* "NONE" */ + } + +#if 1 + /* + * When running the NAND SPL, the normal EBC configuration is not + * done, so We need to enable EPLD access on EBC_CS_2 and the memory + * on EBC_CS_3 + */ + + /* Enable CPLD - Needed for PSRAM Access */ + + + /* Init SDRAM by setting EBC Bank 3 for PSRAM */ + mtebc(pb1ap, CFG_EBC_PB1AP); + mtebc(pb1cr, CFG_EBC_PB1CR); + + mtebc(pb2ap, CFG_EBC_PB2AP); + mtebc(pb2cr, CFG_EBC_PB2CR); + + /* pre-boot loader code: we are in OCM */ + mtspr(SPRG6, LOAK_SPL); /* "SPL " */ + mtspr(SPRG7, LOAK_OCM); /* "OCM " */ +#endif + + return; +} + +static void cram_bcr_write(u32 wr_val) +{ + u32 tmp_reg; + u32 val; + volatile u32 gpio_reg; + + /* # Program CRAM write */ + + /* + * set CRAM_CRE = 0x1 + * set wr_val = wr_val << 2 + */ + gpio_reg = in32(GPIO1_OR); + out32(GPIO1_OR, gpio_reg | 0x00000400); + wr_val = wr_val << 2; + /* wr_val = 0x1c048; */ + + + /* + * # stop PLL clock before programming CRAM + * set EPLD0_MUX_CTL.OESPR3 = 1 + * delay 2 + */ + + + /* + * # CS1 + * read 0x00200000 + * #shift 2 bit left before write + * set val = wr_val + 0x00200000 + * write dmem val 0 + * read 0x00200000 val + * print val/8x + */ + tmp_reg = in32(0x00200000); + val = wr_val + 0x00200000; + /* val = 0x0021c048; */ + out32(val, 0x0000); + udelay(100000); + val = in32(0x00200000); + + debug("CRAM VAL: %x for CS1 ", val); + + /* + * # CS2 + * read 0x02200000 + * #shift 2 bit left before write + * set val = wr_val + 0x02200000 + * write dmem val 0 + * read 0x02200000 val + * print val/8x + */ + tmp_reg = in32(0x02200000); + val = wr_val + 0x02200000; + /* val = 0x0221c048; */ + out32(val, 0x0000); + udelay(100000); + val = in32(0x02200000); + + debug("CRAM VAL: %x for CS2 ", val); + + /* + * # Start PLL clock before programming CRAM + * set EPLD0_MUX_CTL.OESPR3 = 0 + */ + + + /* + * set CRAMCR = 0x1 + */ + gpio_reg = in32(GPIO1_OR); + out32(GPIO1_OR, gpio_reg | 0x00000400); + + /* + * # read CRAM config BCR ( bit19:18 = 10b ) + * #read 0x00200000 + * # 1001_1001_0001_1111 ( 991f ) => + * #10_0110_0100_0111_1100 => 2647c => 0022647c + * #0011_0010_0011_1110 (323e) + * # + */ + + /* + * set EPLD0_MUX_CTL.CRAMCR = 0x0 + */ + gpio_reg = in32(GPIO1_OR); + out32(GPIO1_OR, gpio_reg & 0xFFFFFBFF); + return; +} + +static u32 is_cram_inited() +{ + volatile unsigned long spr_reg; + + /* + * If CRAM is initialized already, then don't reinitialize it again. + * In the case of NAND boot and SPI boot, CRAM will already be + * initialized by the pre-loader + */ + spr_reg = (volatile unsigned long) mfspr(SPRG7); + if (spr_reg == LOAK_CRAM) { + return 1; + } else { + return 0; + } +} + +/****** + * return 0 if not CRAM + * return 1 if CRAM and it's already inited by preloader + * else return cram_id (CRAM Device Identification Register) + ******/ +static u32 is_cram(void) +{ + u32 gpio_TCR, gpio_OSRL, gpio_OR, gpio_ISR1L; + volatile u32 gpio_reg; + volatile u32 cram_id = 0; + + if (is_cram_inited() == 1) { + /* this is CRAM and it is already inited (by preloader) */ + cram_id = 1; + } else { + /* + * # CRAM CLOCK + * set GPIO0_TCR.G8 = 1 + * set GPIO0_OSRL.G8 = 0 + * set GPIO0_OR.G8 = 0 + */ + gpio_reg = in32(GPIO0_TCR); + gpio_TCR = gpio_reg; + out32(GPIO0_TCR, gpio_reg | 0x00800000); + gpio_reg = in32(GPIO0_OSRL); + gpio_OSRL = gpio_reg; + out32(GPIO0_OSRL, gpio_reg & 0xffffbfff); + gpio_reg = in32(GPIO0_OR); + gpio_OR = gpio_reg; + out32(GPIO0_OR, gpio_reg & 0xff7fffff); + + /* + * # CRAM Addreaa Valid + * set GPIO0_TCR.G10 = 1 + * set GPIO0_OSRL.G10 = 0 + * set GPIO0_OR.G10 = 0 + */ + gpio_reg = in32(GPIO0_TCR); + out32(GPIO0_TCR, gpio_reg | 0x00200000); + gpio_reg = in32(GPIO0_OSRL); + out32(GPIO0_OSRL, gpio_reg & 0xfffffbff); + gpio_reg = in32(GPIO0_OR); + out32(GPIO0_OR, gpio_reg & 0xffdfffff); + + /* + * # config input (EBC_WAIT) + * set GPIO0_ISR1L.G9 = 1 + * set GPIO0_TCR.G9 = 0 + */ + gpio_reg = in32(GPIO0_ISR1L); + gpio_ISR1L = gpio_reg; + out32(GPIO0_ISR1L, gpio_reg | 0x00001000); + gpio_reg = in32(GPIO0_TCR); + out32(GPIO0_TCR, gpio_reg & 0xffbfffff); + + /* + * Enable CRE to read Registers + * set GPIO0_TCR.21 = 1 + * set GPIO1_OR.21 = 1 + */ + gpio_reg = in32(GPIO1_TCR); + out32(GPIO1_TCR, gpio_reg | 0x00000400); + + gpio_reg = in32(GPIO1_OR); + out32(GPIO1_OR, gpio_reg | 0x00000400); + + + + + /* Read Version ID */ + cram_id = (volatile u32) in32(CRAM_BANK0_BASE+CRAM_DIDR); + udelay(100000); + + asm volatile(" sync"); + asm volatile(" eieio"); + + debug("Cram ID: %X ", cram_id); + + switch (cram_id) { + case MICRON_MT45W8MW16BGX_CRAM_ID: + case MICRON_MT45W8MW16BGX_CRAM_ID2: + /* supported CRAM vendor/part */ + break; + case CRAM_DEVID_NOT_SUPPORTED: + default: + /* check for DIDR Vendor ID of Micron */ + if ((cram_id & CRAM_DIDR_VENDOR_ID_MASK) == + MICRON_DIDR_VENDOR_ID) + { + /* supported CRAM vendor */ + break; + } + /* this is not CRAM or not supported CRAM vendor/part */ + cram_id = 0; + /* + * reset the GPIO registers to the values that were + * there before this routine + */ + out32(GPIO0_TCR, gpio_TCR); + out32(GPIO0_OSRL, gpio_OSRL); + out32(GPIO0_OR, gpio_OR); + out32(GPIO0_ISR1L, gpio_ISR1L); + break; + } + } + + return cram_id; +} + +static long int cram_init(u32 already_inited) +{ + volatile u32 tmp_reg; + u32 cram_wr_val; + + if (already_inited == 0) return 0; + + /* + * If CRAM is initialized already, then don't reinitialize it again. + * In the case of NAND boot and SPI boot, CRAM will already be + * initialized by the pre-loader + */ + if (already_inited != 1) + { + /* + * #o CRAM Card + * # - CRAMCRE @reg16 = 1; for CRAM to use + * # - CRAMCRE @reg16 = 0; for CRAM to program + * + * # enable CRAM SEL, move from setEPLD.cmd + * set EPLD0_MUX_CTL.OECRAM = 0 + * set EPLD0_MUX_CTL.CRAMCR = 1 + * set EPLD0_ETHRSTBOOT.SLCRAM = 0 + * #end + */ + + + /* + * #1. EBC need to program READY, CLK, ADV for ASync mode + * # config output + */ + + /* + * # CRAM CLOCK + * set GPIO0_TCR.G8 = 1 + * set GPIO0_OSRL.G8 = 0 + * set GPIO0_OR.G8 = 0 + */ + tmp_reg = in32(GPIO0_TCR); + out32(GPIO0_TCR, tmp_reg | 0x00800000); + tmp_reg = in32(GPIO0_OSRL); + out32(GPIO0_OSRL, tmp_reg & 0xffffbfff); + tmp_reg = in32(GPIO0_OR); + out32(GPIO0_OR, tmp_reg & 0xff7fffff); + + /* + * # CRAM Addreaa Valid + * set GPIO0_TCR.G10 = 1 + * set GPIO0_OSRL.G10 = 0 + * set GPIO0_OR.G10 = 0 + */ + tmp_reg = in32(GPIO0_TCR); + out32(GPIO0_TCR, tmp_reg | 0x00200000); + tmp_reg = in32(GPIO0_OSRL); + out32(GPIO0_OSRL, tmp_reg & 0xfffffbff); + tmp_reg = in32(GPIO0_OR); + out32(GPIO0_OR, tmp_reg & 0xffdfffff); + + /* + * # config input (EBC_WAIT) + * set GPIO0_ISR1L.G9 = 1 + * set GPIO0_TCR.G9 = 0 + */ + tmp_reg = in32(GPIO0_ISR1L); + out32(GPIO0_ISR1L, tmp_reg | 0x00001000); + tmp_reg = in32(GPIO0_TCR); + out32(GPIO0_TCR, tmp_reg & 0xffbfffff); + + /* + * # config CS4 from GPIO + * set GPIO0_TCR.G0 = 1 + * set GPIO0_OSRL.G0 = 1 + */ + tmp_reg = in32(GPIO0_TCR); + out32(GPIO0_TCR, tmp_reg | 0x80000000); + tmp_reg = in32(GPIO0_OSRL); + out32(GPIO0_OSRL, tmp_reg | 0x40000000); + + /* + * #2. EBC in Async mode + * # set EBC0_PB1AP = 0x078f0ec0 + * set EBC0_PB1AP = 0x078f1ec0 + * set EBC0_PB2AP = 0x078f1ec0 + */ + mtebc(pb1ap, 0x078F1EC0); + mtebc(pb2ap, 0x078F1EC0); + + /* + * #set EBC0_PB1CR = 0x000bc000 + * #enable CS2 for CRAM + * set EBC0_PB2CR = 0x020bc000 + */ + mtebc(pb1cr, 0x000BC000); + mtebc(pb2cr, 0x020BC000); + + /* + * #3. set CRAM in Sync mode + * #exec cm_bcr_write.cmd { 0x701f } + * #3. set CRAM in Sync mode (full drv strength) + * exec cm_bcr_write.cmd { 0x701F } + */ + cram_wr_val = 0x7012; /* CRAM burst setting */ + cram_bcr_write(cram_wr_val); + + /* + * #4. EBC in Sync mode + * #set EBC0_PB1AP = 0x9f800fc0 + * #set EBC0_PB1AP = 0x900001c0 + * set EBC0_PB2AP = 0x9C0201c0 + * set EBC0_PB2AP = 0x9C0201c0 + */ + mtebc(pb1ap, 0x9C0201C0); + mtebc(pb2ap, 0x9C0201C0); + + /* + * #5. EBC need to program READY, CLK, ADV for Sync mode + * # config output + * set GPIO0_TCR.G8 = 1 + * set GPIO0_OSRL.G8 = 1 + * set GPIO0_TCR.G10 = 1 + * set GPIO0_OSRL.G10 = 1 + */ + tmp_reg = in32(GPIO0_TCR); + out32(GPIO0_TCR, tmp_reg | 0x00800000); + tmp_reg = in32(GPIO0_OSRL); + out32(GPIO0_OSRL, tmp_reg | 0x00004000); + tmp_reg = in32(GPIO0_TCR); + out32(GPIO0_TCR, tmp_reg | 0x00200000); + tmp_reg = in32(GPIO0_OSRL); + out32(GPIO0_OSRL, tmp_reg | 0x00000400); + + /* + * # config input + * set GPIO0_ISR1L.G9 = 1 + * set GPIO0_TCR.G9 = 0 + */ + tmp_reg = in32(GPIO0_ISR1L); + out32(GPIO0_ISR1L, tmp_reg | 0x00001000); + tmp_reg = in32(GPIO0_TCR); + out32(GPIO0_TCR, tmp_reg & 0xffbfffff); + + /* + * # config EBC to use RDY + * set SDR0_ULTRA0.EBCREN = 1 + */ + mfsdr(sdrultra0, tmp_reg); + mtsdr(sdrultra0, tmp_reg | 0x04000000); + + /* + * set EPLD0_MUX_CTL.OESPR3 = 0 + */ + + + mtspr(SPRG7, LOAK_CRAM); /* "CRAM" */ + } /* if (already_inited != 1) */ + + return (64 * 1024 * 1024); +} + +/****** + * return 0 if not PSRAM + * return 1 if is PSRAM + ******/ +static int is_psram(u32 addr) +{ + u32 test_pattern = 0xdeadbeef; + volatile u32 readback; + + if (addr == CFG_SDRAM_BASE) { + /* This is to temp enable OE for PSRAM */ + out16(EPLD_BASE+EPLD_MUXOE, 0x7f0f); + udelay(10000); + } + + out32(addr, test_pattern); + asm volatile(" sync"); + asm volatile(" eieio"); + + readback = (volatile u32) in32(addr); + asm volatile(" sync"); + asm volatile(" eieio"); + if (readback == test_pattern) { + return 1; + } else { + return 0; + } +} + +static long int psram_init(void) +{ + u32 readback; + long psramsize = 0; + int i; + + /* This is to temp enable OE for PSRAM */ + out16(EPLD_BASE+EPLD_MUXOE, 0x7f0f); + udelay(10000); + + /* + * PSRAM bank 1: read then write to address 0x00000000 + */ + for (i = 0; i < 100; i++) { + if (is_psram(CFG_SDRAM_BASE + (i*256)) == 1) { + readback = PSRAM_PASS; + } else { + readback = PSRAM_FAIL; + break; + } + } + if (readback == PSRAM_PASS) { + debug("psram_init(bank0): pass\n"); + psramsize = (16 * 1024 * 1024); + } else { + debug("psram_init(bank0): fail\n"); + return 0; + } + +#if 0 + /* + * PSRAM bank 1: read then write to address 0x01000000 + */ + for (i = 0; i < 100; i++) { + if (is_psram((1 << 24) + (i*256)) == 1) { + readback = PSRAM_PASS; + } else { + readback = PSRAM_FAIL; + break; + } + } + if (readback == PSRAM_PASS) { + debug("psram_init(bank1): pass\n"); + psramsize = psramsize + (16 * 1024 * 1024); + } +#endif + + mtspr(SPRG7, LOAK_PSRAM); /* "PSRA" - PSRAM */ + + return psramsize; +} + +long int initdram(int board_type) +{ + long int sram_size; + u32 cram_inited; + + /* Determine Attached Memory Expansion Card*/ + cram_inited = is_cram(); + if (cram_inited != 0) { /* CRAM */ + debug("CRAM Expansion Card attached\n"); + sram_size = cram_init(cram_inited); + } else if (is_psram(CFG_SDRAM_BASE+4) == 1) { /* PSRAM */ + debug("PSRAM Expansion Card attached\n"); + sram_size = psram_init(); + } else { /* no SRAM */ + debug("No Memory Card Attached!!\n"); + sram_size = 0; + } + + return sram_size; +} + +int testdram(void) +{ + return (0); +} |