PowerPC: drop some 74xx_7xx boards and related code

The file  board/Marvell/include/mv_gen_reg.h  is incompatible with
the GPL (see for example the "MARVELL RESERVES THE RIGHT AT ITS SOLE
DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO
MARVELL" clause).  As this cannot be fixed, we remove the file and all
code that depends on it.  Fortunately this only affects some very old
boards that have long reached EOL:
	CPCI750
	DB64360
	DB64460
	p3m750
	p3m7448

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Roger Meier <r.meier@siemens.com>

1 files changed, 0 insertions, 140 deletions

diff --git a/board/Marvell/db64360/mpsc.h b/board/Marvell/db64360/mpsc.h
deleted file mode 100644
index ca1e89a..0000000
--- a/board/Marvell/db64360/mpsc.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * (C) Copyright 2001
- * John Clemens <clemens@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*************************************************************************
- * changes for Marvell DB64360 eval board 2003 by Ingo Assmus <ingo.assmus@keymile.com>
- *
-  ************************************************************************/
-
-
-/*
- * mpsc.h - header file for MPSC in uart mode (console driver)
- */
-
-#ifndef __MPSC_H__
-#define __MPSC_H__
-
-/* include actual Galileo defines */
-#include "../include/mv_gen_reg.h"
-
-/* driver related defines */
-
-int mpsc_init(int baud);
-void mpsc_sdma_init(void);
-void mpsc_init2(void);
-int galbrg_set_baudrate(int channel, int rate);
-
-int mpsc_putchar_early(char ch);
-char mpsc_getchar_debug(void);
-int mpsc_test_char_debug(void);
-
-int mpsc_test_char_sdma(void);
-
-extern int (*mpsc_putchar)(char ch);
-extern char (*mpsc_getchar)(void);
-extern int (*mpsc_test_char)(void);
-
-#define CHANNEL CONFIG_MPSC_PORT
-
-#define TX_DESC     5
-#define RX_DESC     20
-
-#define DESC_FIRST  0x00010000
-#define DESC_LAST   0x00020000
-#define DESC_OWNER_BIT  0x80000000
-
-#define TX_DEMAND   0x00800000
-#define TX_STOP     0x00010000
-#define RX_ENABLE   0x00000080
-
-#define SDMA_RX_ABORT		  (1 << 15)
-#define SDMA_TX_ABORT		  (1 << 31)
-#define MPSC_TX_ABORT		  (1 << 7)
-#define MPSC_RX_ABORT             (1 << 23)
-#define MPSC_ENTER_HUNT           (1 << 31)
-
-/* MPSC defines */
-
-#define GALMPSC_CONNECT            0x1
-#define GALMPSC_DISCONNECT         0x0
-
-#define GALMPSC_UART               0x1
-
-#define GALMPSC_STOP_BITS_1        0x0
-#define GALMPSC_STOP_BITS_2        0x1
-#define GALMPSC_CHAR_LENGTH_8      0x3
-#define GALMPSC_CHAR_LENGTH_7      0x2
-
-#define GALMPSC_PARITY_ODD         0x0
-#define GALMPSC_PARITY_EVEN        0x2
-#define GALMPSC_PARITY_MARK        0x3
-#define GALMPSC_PARITY_SPACE       0x1
-#define GALMPSC_PARITY_NONE        -1
-
-#define GALMPSC_SERIAL_MULTIPLEX   SERIAL_PORT_MULTIPLEX           /* 0xf010 */
-#define GALMPSC_ROUTING_REGISTER   MAIN_ROUTING_REGISTER           /* 0xb400 */
-#define GALMPSC_RxC_ROUTE          RECEIVE_CLOCK_ROUTING_REGISTER  /* 0xb404 */
-#define GALMPSC_TxC_ROUTE          TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */
-#define GALMPSC_MCONF_LOW          MPSC0_MAIN_CONFIGURATION_LOW    /* 0x8000 */
-#define GALMPSC_MCONF_HIGH         MPSC0_MAIN_CONFIGURATION_HIGH   /* 0x8004 */
-#define GALMPSC_PROTOCONF_REG      MPSC0_PROTOCOL_CONFIGURATION    /* 0x8008 */
-
-#define GALMPSC_REG_GAP            0x1000
-
-#define GALMPSC_MCONF_CHREG_BASE   CHANNEL0_REGISTER1  /* 0x800c */
-#define GALMPSC_CHANNELREG_1       CHANNEL0_REGISTER1  /* 0x800c */
-#define GALMPSC_CHANNELREG_2       CHANNEL0_REGISTER2  /* 0x8010 */
-#define GALMPSC_CHANNELREG_3       CHANNEL0_REGISTER3  /* 0x8014 */
-#define GALMPSC_CHANNELREG_4       CHANNEL0_REGISTER4  /* 0x8018 */
-#define GALMPSC_CHANNELREG_5       CHANNEL0_REGISTER5  /* 0x801c */
-#define GALMPSC_CHANNELREG_6       CHANNEL0_REGISTER6  /* 0x8020 */
-#define GALMPSC_CHANNELREG_7       CHANNEL0_REGISTER7  /* 0x8024 */
-#define GALMPSC_CHANNELREG_8       CHANNEL0_REGISTER8  /* 0x8028 */
-#define GALMPSC_CHANNELREG_9       CHANNEL0_REGISTER9  /* 0x802c */
-#define GALMPSC_CHANNELREG_10      CHANNEL0_REGISTER10 /* 0x8030 */
-#define GALMPSC_CHANNELREG_11      CHANNEL0_REGISTER11 /* 0x8034 */
-
-#define GALSDMA_COMMAND_FIRST     (1 << 16)
-#define GALSDMA_COMMAND_LAST      (1 << 17)
-#define GALSDMA_COMMAND_ENABLEINT (1 << 23)
-#define GALSDMA_COMMAND_AUTO      (1 << 30)
-#define GALSDMA_COMMAND_OWNER     (1 << 31)
-
-#define GALSDMA_RX                 0
-#define GALSDMA_TX                 1
-
-/* CHANNEL2 should be CHANNEL1, according to documentation,
- * but to work with the current GTREGS file...
- */
-#define GALSDMA_0_CONF_REG         CHANNEL0_CONFIGURATION_REGISTER   /* 0x4000 */
-#define GALSDMA_1_CONF_REG         CHANNEL2_CONFIGURATION_REGISTER   /* 0x6000 */
-#define GALSDMA_0_COM_REG          CHANNEL0_COMMAND_REGISTER         /* 0x4008 */
-#define GALSDMA_1_COM_REG          CHANNEL2_COMMAND_REGISTER         /* 0x6008 */
-#define GALSDMA_0_CUR_RX_PTR       CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER  /* 0x4810 */
-#define GALSDMA_0_CUR_TX_PTR       CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER  /* 0x4c10 */
-#define GALSDMA_0_FIR_TX_PTR       CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER    /* 0x4c14 */
-#define GALSDMA_1_CUR_RX_PTR       CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER  /* 0x6810 */
-#define GALSDMA_1_CUR_TX_PTR       CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER  /* 0x6c10 */
-#define GALSDMA_1_FIR_TX_PTR       CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER    /* 0x6c14 */
-#define GALSDMA_REG_DIFF           0x2000
-
-/* WRONG in gt64260R.h */
-#define GALSDMA_INT_CAUSE          0xb800   /* SDMA_CAUSE */
-#define GALSDMA_INT_MASK           0xb880   /* SDMA_MASK  */
-#define GALMPSC_0_INT_CAUSE        0xb804
-#define GALMPSC_0_INT_MASK         0xb884
-
-#define GALSDMA_MODE_UART          0
-#define GALSDMA_MODE_BISYNC        1
-#define GALSDMA_MODE_HDLC          2
-#define GALSDMA_MODE_TRANSPARENT   3
-
-#define GALBRG_0_CONFREG           BRG0_CONFIGURATION_REGISTER  /*  0xb200  */
-#define GALBRG_REG_GAP             0x0008
-#define GALBRG_0_BTREG             BRG0_BAUDE_TUNING_REGISTER   /*  0xb204  */
-
-#endif /* __MPSC_H__ */