From 03b004074fb641cffd7d2150505ef8afc13231bf Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Tue, 21 Oct 2014 15:23:32 +0200 Subject: PowerPC: drop some 74xx_7xx boards and related code The file board/Marvell/include/mv_gen_reg.h is incompatible with the GPL (see for example the "MARVELL RESERVES THE RIGHT AT ITS SOLE DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO MARVELL" clause). As this cannot be fixed, we remove the file and all code that depends on it. Fortunately this only affects some very old boards that have long reached EOL: CPCI750 DB64360 DB64460 p3m750 p3m7448 Signed-off-by: Wolfgang Denk Cc: Reinhard Arlt Cc: Stefan Roese Cc: Roger Meier --- board/Marvell/db64360/mpsc.h | 140 ------------------------------------------- 1 file changed, 140 deletions(-) delete mode 100644 board/Marvell/db64360/mpsc.h (limited to 'board/Marvell/db64360/mpsc.h') diff --git a/board/Marvell/db64360/mpsc.h b/board/Marvell/db64360/mpsc.h deleted file mode 100644 index ca1e89a..0000000 --- a/board/Marvell/db64360/mpsc.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * (C) Copyright 2001 - * John Clemens , Mission Critical Linux, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************* - * changes for Marvell DB64360 eval board 2003 by Ingo Assmus - * - ************************************************************************/ - - -/* - * mpsc.h - header file for MPSC in uart mode (console driver) - */ - -#ifndef __MPSC_H__ -#define __MPSC_H__ - -/* include actual Galileo defines */ -#include "../include/mv_gen_reg.h" - -/* driver related defines */ - -int mpsc_init(int baud); -void mpsc_sdma_init(void); -void mpsc_init2(void); -int galbrg_set_baudrate(int channel, int rate); - -int mpsc_putchar_early(char ch); -char mpsc_getchar_debug(void); -int mpsc_test_char_debug(void); - -int mpsc_test_char_sdma(void); - -extern int (*mpsc_putchar)(char ch); -extern char (*mpsc_getchar)(void); -extern int (*mpsc_test_char)(void); - -#define CHANNEL CONFIG_MPSC_PORT - -#define TX_DESC 5 -#define RX_DESC 20 - -#define DESC_FIRST 0x00010000 -#define DESC_LAST 0x00020000 -#define DESC_OWNER_BIT 0x80000000 - -#define TX_DEMAND 0x00800000 -#define TX_STOP 0x00010000 -#define RX_ENABLE 0x00000080 - -#define SDMA_RX_ABORT (1 << 15) -#define SDMA_TX_ABORT (1 << 31) -#define MPSC_TX_ABORT (1 << 7) -#define MPSC_RX_ABORT (1 << 23) -#define MPSC_ENTER_HUNT (1 << 31) - -/* MPSC defines */ - -#define GALMPSC_CONNECT 0x1 -#define GALMPSC_DISCONNECT 0x0 - -#define GALMPSC_UART 0x1 - -#define GALMPSC_STOP_BITS_1 0x0 -#define GALMPSC_STOP_BITS_2 0x1 -#define GALMPSC_CHAR_LENGTH_8 0x3 -#define GALMPSC_CHAR_LENGTH_7 0x2 - -#define GALMPSC_PARITY_ODD 0x0 -#define GALMPSC_PARITY_EVEN 0x2 -#define GALMPSC_PARITY_MARK 0x3 -#define GALMPSC_PARITY_SPACE 0x1 -#define GALMPSC_PARITY_NONE -1 - -#define GALMPSC_SERIAL_MULTIPLEX SERIAL_PORT_MULTIPLEX /* 0xf010 */ -#define GALMPSC_ROUTING_REGISTER MAIN_ROUTING_REGISTER /* 0xb400 */ -#define GALMPSC_RxC_ROUTE RECEIVE_CLOCK_ROUTING_REGISTER /* 0xb404 */ -#define GALMPSC_TxC_ROUTE TRANSMIT_CLOCK_ROUTING_REGISTER /* 0xb408 */ -#define GALMPSC_MCONF_LOW MPSC0_MAIN_CONFIGURATION_LOW /* 0x8000 */ -#define GALMPSC_MCONF_HIGH MPSC0_MAIN_CONFIGURATION_HIGH /* 0x8004 */ -#define GALMPSC_PROTOCONF_REG MPSC0_PROTOCOL_CONFIGURATION /* 0x8008 */ - -#define GALMPSC_REG_GAP 0x1000 - -#define GALMPSC_MCONF_CHREG_BASE CHANNEL0_REGISTER1 /* 0x800c */ -#define GALMPSC_CHANNELREG_1 CHANNEL0_REGISTER1 /* 0x800c */ -#define GALMPSC_CHANNELREG_2 CHANNEL0_REGISTER2 /* 0x8010 */ -#define GALMPSC_CHANNELREG_3 CHANNEL0_REGISTER3 /* 0x8014 */ -#define GALMPSC_CHANNELREG_4 CHANNEL0_REGISTER4 /* 0x8018 */ -#define GALMPSC_CHANNELREG_5 CHANNEL0_REGISTER5 /* 0x801c */ -#define GALMPSC_CHANNELREG_6 CHANNEL0_REGISTER6 /* 0x8020 */ -#define GALMPSC_CHANNELREG_7 CHANNEL0_REGISTER7 /* 0x8024 */ -#define GALMPSC_CHANNELREG_8 CHANNEL0_REGISTER8 /* 0x8028 */ -#define GALMPSC_CHANNELREG_9 CHANNEL0_REGISTER9 /* 0x802c */ -#define GALMPSC_CHANNELREG_10 CHANNEL0_REGISTER10 /* 0x8030 */ -#define GALMPSC_CHANNELREG_11 CHANNEL0_REGISTER11 /* 0x8034 */ - -#define GALSDMA_COMMAND_FIRST (1 << 16) -#define GALSDMA_COMMAND_LAST (1 << 17) -#define GALSDMA_COMMAND_ENABLEINT (1 << 23) -#define GALSDMA_COMMAND_AUTO (1 << 30) -#define GALSDMA_COMMAND_OWNER (1 << 31) - -#define GALSDMA_RX 0 -#define GALSDMA_TX 1 - -/* CHANNEL2 should be CHANNEL1, according to documentation, - * but to work with the current GTREGS file... - */ -#define GALSDMA_0_CONF_REG CHANNEL0_CONFIGURATION_REGISTER /* 0x4000 */ -#define GALSDMA_1_CONF_REG CHANNEL2_CONFIGURATION_REGISTER /* 0x6000 */ -#define GALSDMA_0_COM_REG CHANNEL0_COMMAND_REGISTER /* 0x4008 */ -#define GALSDMA_1_COM_REG CHANNEL2_COMMAND_REGISTER /* 0x6008 */ -#define GALSDMA_0_CUR_RX_PTR CHANNEL0_CURRENT_RX_DESCRIPTOR_POINTER /* 0x4810 */ -#define GALSDMA_0_CUR_TX_PTR CHANNEL0_CURRENT_TX_DESCRIPTOR_POINTER /* 0x4c10 */ -#define GALSDMA_0_FIR_TX_PTR CHANNEL0_FIRST_TX_DESCRIPTOR_POINTER /* 0x4c14 */ -#define GALSDMA_1_CUR_RX_PTR CHANNEL2_CURRENT_RX_DESCRIPTOR_POINTER /* 0x6810 */ -#define GALSDMA_1_CUR_TX_PTR CHANNEL2_CURRENT_TX_DESCRIPTOR_POINTER /* 0x6c10 */ -#define GALSDMA_1_FIR_TX_PTR CHANNEL2_FIRST_TX_DESCRIPTOR_POINTER /* 0x6c14 */ -#define GALSDMA_REG_DIFF 0x2000 - -/* WRONG in gt64260R.h */ -#define GALSDMA_INT_CAUSE 0xb800 /* SDMA_CAUSE */ -#define GALSDMA_INT_MASK 0xb880 /* SDMA_MASK */ -#define GALMPSC_0_INT_CAUSE 0xb804 -#define GALMPSC_0_INT_MASK 0xb884 - -#define GALSDMA_MODE_UART 0 -#define GALSDMA_MODE_BISYNC 1 -#define GALSDMA_MODE_HDLC 2 -#define GALSDMA_MODE_TRANSPARENT 3 - -#define GALBRG_0_CONFREG BRG0_CONFIGURATION_REGISTER /* 0xb200 */ -#define GALBRG_REG_GAP 0x0008 -#define GALBRG_0_BTREG BRG0_BAUDE_TUNING_REGISTER /* 0xb204 */ - -#endif /* __MPSC_H__ */ -- cgit v1.1