summaryrefslogtreecommitdiff
path: root/board/LaCie/net2big_v2
diff options
context:
space:
mode:
authorSimon Guinot <simon.guinot@sequanux.org>2011-11-21 19:25:47 +0530
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2011-12-06 23:59:30 +0100
commit77ea071fefbda70ed21a6f0e7bd34ec215e70d39 (patch)
tree72bd114929a758873cdeaf075db880e9d5018ee0 /board/LaCie/net2big_v2
parent5628fb75d10764c377bd7eef9dfb4476f2398ff7 (diff)
downloadu-boot-imx-77ea071fefbda70ed21a6f0e7bd34ec215e70d39.zip
u-boot-imx-77ea071fefbda70ed21a6f0e7bd34ec215e70d39.tar.gz
u-boot-imx-77ea071fefbda70ed21a6f0e7bd34ec215e70d39.tar.bz2
ARM: remove duplicated code for LaCie boards
This patch groups together all the common functions for LaCie boards: Ethernet PHY and MAC address initializations. Moreover the configurations for LaCie Kirkwood boards are merged into a single file: include/configs/lacie_kw.h Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Diffstat (limited to 'board/LaCie/net2big_v2')
-rw-r--r--board/LaCie/net2big_v2/Makefile5
-rw-r--r--board/LaCie/net2big_v2/net2big_v2.c86
-rw-r--r--board/LaCie/net2big_v2/net2big_v2.h8
3 files changed, 16 insertions, 83 deletions
diff --git a/board/LaCie/net2big_v2/Makefile b/board/LaCie/net2big_v2/Makefile
index 4bacef4..fbae48e 100644
--- a/board/LaCie/net2big_v2/Makefile
+++ b/board/LaCie/net2big_v2/Makefile
@@ -21,10 +21,13 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
LIB = $(obj)lib$(BOARD).o
-COBJS := net2big_v2.o
+COBJS := $(BOARD).o ../common/common.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/LaCie/net2big_v2/net2big_v2.c b/board/LaCie/net2big_v2/net2big_v2.c
index 16d1405..d0b4adf 100644
--- a/board/LaCie/net2big_v2/net2big_v2.c
+++ b/board/LaCie/net2big_v2/net2big_v2.c
@@ -21,15 +21,14 @@
*/
#include <common.h>
-#include <miiphy.h>
-#include <netdev.h>
#include <command.h>
-#include <i2c.h>
#include <asm/arch/cpu.h>
#include <asm/arch/kirkwood.h>
#include <asm/arch/mpp.h>
#include <asm/arch/gpio.h>
+
#include "net2big_v2.h"
+#include "../common/common.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -92,91 +91,29 @@ int board_init(void)
return 0;
}
+#if defined(CONFIG_MISC_INIT_R)
int misc_init_r(void)
{
-#ifdef CONFIG_CMD_I2C
+#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
if (!getenv("ethaddr")) {
- ushort version;
uchar mac[6];
- int ret;
-
- /* I2C-0 for on-board EEPROM */
- i2c_set_bus_num(0);
-
- /* Check layout version for EEPROM data */
- ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
- CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
- (uchar *) &version, 2);
- if (ret != 0) {
- printf("Error: failed to read I2C EEPROM @%02x\n",
- CONFIG_SYS_I2C_EEPROM_ADDR);
- return ret;
- }
- version = be16_to_cpu(version);
- if (version < 1 || version > 3) {
- printf("Error: unknown version %d for EEPROM data\n",
- version);
- return -1;
- }
-
- /* Read Ethernet MAC address from EEPROM */
- ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 2,
- CONFIG_SYS_I2C_EEPROM_ADDR_LEN, mac, 6);
- if (ret != 0) {
- printf("Error: failed to read I2C EEPROM @%02x\n",
- CONFIG_SYS_I2C_EEPROM_ADDR);
- return ret;
- }
- eth_setenv_enetaddr("ethaddr", mac);
+ if (lacie_read_mac_address(mac) == 0)
+ eth_setenv_enetaddr("ethaddr", mac);
}
-#endif /* CONFIG_CMD_I2C */
-
+#endif
return 0;
}
+#endif
-void mv_phy_88e1116_init(char *name)
-{
- u16 reg;
- u16 devadr;
-
- if (miiphy_set_current_dev(name))
- return;
-
- /* command to read PHY dev address */
- if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
- printf("Err..(%s) could not read PHY dev address\n", __func__);
- return;
- }
-
- /*
- * Enable RGMII delay on Tx and Rx for CPU port
- * Ref: sec 4.7.2 of chip datasheet
- */
- miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
- miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg);
- reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
- miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
- miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
-
- /* reset the phy */
- if (miiphy_read(name, devadr, MII_BMCR, &reg) != 0) {
- printf("Err..(%s) PHY status read failed\n", __func__);
- return;
- }
- if (miiphy_write(name, devadr, MII_BMCR, reg | 0x8000) != 0) {
- printf("Err..(%s) PHY reset failed\n", __func__);
- return;
- }
-
- debug("88E1116 Initialized on %s\n", name);
-}
-
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
/* Configure and initialize PHY */
void reset_phy(void)
{
mv_phy_88e1116_init("egiga0");
}
+#endif
+#if defined(CONFIG_KIRKWOOD_GPIO)
/* Return GPIO push button status */
static int
do_read_push_button(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
@@ -186,3 +123,4 @@ do_read_push_button(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
U_BOOT_CMD(button, 1, 1, do_read_push_button,
"Return GPIO push button status 0=off 1=on", "");
+#endif
diff --git a/board/LaCie/net2big_v2/net2big_v2.h b/board/LaCie/net2big_v2/net2big_v2.h
index bbe67af..f9778f4 100644
--- a/board/LaCie/net2big_v2/net2big_v2.h
+++ b/board/LaCie/net2big_v2/net2big_v2.h
@@ -32,12 +32,4 @@
/* Buttons */
#define NET2BIG_V2_GPIO_PUSH_BUTTON 34
-/* PHY related */
-#define MV88E1116_LED_FCTRL_REG 10
-#define MV88E1116_CPRSP_CR3_REG 21
-#define MV88E1116_MAC_CTRL_REG 21
-#define MV88E1116_PGADR_REG 22
-#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
-#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
-
#endif /* NET2BIG_V2_H */