Merge branch 'master' of git://git.denx.de/u-boot into master

Conflicts:
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/woodburn_common.h
	board/woodburn/woodburn.c

These boards still use the old old PMIC framework, so they
do not merge properly after the power framework was merged into
mainline.

Fix all conflicts and update woodburn to use Power Framework.

Signed-off-by: Stefano Babic <sbabic@denx.de>

1 files changed, 0 insertions, 415 deletions

diff --git a/board/BuS/eb_cpu5282/flash.c b/board/BuS/eb_cpu5282/flash.c
deleted file mode 100644
index 8b7f957..0000000
--- a/board/BuS/eb_cpu5282/flash.c
+++ /dev/null
@@ -1,415 +0,0 @@
-/*
- * (C) Copyright 2005
- * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
- *
- * Based On
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include  "cfm_flash.h"
-
-#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
-#define FLASH_BANK_SIZE 0x200000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case (AMD_MANUFACT & FLASH_VENDMASK):
-		printf ("AMD: ");
-		switch (info->flash_id & FLASH_TYPEMASK) {
-		case (AMD_ID_LV160B & FLASH_TYPEMASK):
-			printf ("AM29LV160B (16Bit)\n");
-			break;
-		default:
-			printf ("Unknown Chip Type\n");
-			break;
-		}
-		break;
-	case FREESCALE_MANUFACT & FLASH_VENDMASK:
-		cfm_flash_print_info (info);
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	puts ("  Size: ");
-	if ((info->size >> 20) > 0)
-	{
-		printf ("%ld MiB",info->size >> 20);
-	}
-	else
-	{
-		printf ("%ld KiB",info->size >> 10);
-	}
-	printf (" in %d Sectors\n", info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; i++) {
-		if ((i % 4) == 0) {
-			printf ("\n    ");
-		}
-		printf ("%02d: %08lX%s  ", i,info->start[i],
-			info->protect[i] ? " P" : "  ");
-	}
-	printf ("\n\n");
-}
-
-unsigned long flash_init (void)
-{
-	int i, j;
-	ulong size = 0;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		ulong flashbase = 0;
-
-		switch (i)
-		{
-		case 1:
-			flash_info[i].flash_id =
-				(AMD_MANUFACT & FLASH_VENDMASK) |
-				(AMD_ID_LV160B & FLASH_TYPEMASK);
-			flash_info[i].size = FLASH_BANK_SIZE;
-			flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-			memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-			flashbase = PHYS_FLASH_1;
-			for (j = 0; j < flash_info[i].sector_count; j++) {
-				if (j == 0) {
-					/* 1st is 16 KiB */
-					flash_info[i].start[j] = flashbase;
-				}
-				if ((j >= 1) && (j <= 2)) {
-				/* 2nd and 3rd are 8 KiB */
-					flash_info[i].start[j] =
-						flashbase + 0x4000 + 0x2000 * (j - 1);
-				}
-				if (j == 3) {
-					/* 4th is 32 KiB */
-					flash_info[i].start[j] = flashbase + 0x8000;
-				}
-				if ((j >= 4) && (j <= 34)) {
-					/* rest is 256 KiB */
-					flash_info[i].start[j] =
-						flashbase + 0x10000 + 0x10000 * (j - 4);
-				}
-			}
-			break;
-		case 0:
-			cfm_flash_init (&flash_info[i]);
-			break;
-		default:
-			panic ("configured to many flash banks!\n");
-		}
-
-		size += flash_info[i].size;
-	}
-
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_SYS_FLASH_BASE,
-		       CONFIG_SYS_FLASH_BASE + 0xffff, &flash_info[0]);
-
-	return size;
-}
-
-#define CMD_READ_ARRAY		0x00F0
-#define CMD_UNLOCK1		0x00AA
-#define CMD_UNLOCK2		0x0055
-#define CMD_ERASE_SETUP		0x0080
-#define CMD_ERASE_CONFIRM	0x0030
-#define CMD_PROGRAM		0x00A0
-#define CMD_UNLOCK_BYPASS	0x0020
-
-#define MEM_FLASH_ADDR1		(*(volatile u16 *)(info->start[0] + (0x00000555<<1)))
-#define MEM_FLASH_ADDR2		(*(volatile u16 *)(info->start[0] + (0x000002AA<<1)))
-
-
-#define BIT_ERASE_DONE		0x0080
-#define BIT_RDY_MASK		0x0080
-#define BIT_PROGRAM_ERROR	0x0020
-#define BIT_TIMEOUT		0x80000000	/* our flag */
-
-#define ERR_READY -1
-
-int amd_flash_erase_sector(flash_info_t * info, int sector)
-{
-	int state;
-	ulong result;
-	ulong start;
-
-	volatile u16 *addr =
-				(volatile u16 *) (info->start[sector]);
-
-	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-	MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
-	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-	*addr = CMD_ERASE_CONFIRM;
-
-	/* wait until flash is ready */
-	state = 0;
-	start = get_timer(0);
-
-	do {
-		result = *addr;
-
-		/* check timeout */
-		if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-			state = ERR_TIMOUT;
-		}
-
-		if (!state && (result & 0xFFFF) & BIT_ERASE_DONE)
-			state = ERR_READY;
-	}
-	while (!state);
-	if (state == ERR_READY)
-		state = ERR_OK;
-
-	MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
-	return state;
-}
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int iflag, cflag;
-	int sector;
-	int rc;
-
-	rc = ERR_OK;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-	{
-		rc = ERR_UNKNOWN_FLASH_TYPE;
-	} /* (info->flash_id == FLASH_UNKNOWN) */
-
-	if ((s_first < 0) || (s_first > s_last) || s_last >= info->sector_count)
-	{
-		rc = ERR_INVAL;
-	}
-
-	cflag = icache_status ();
-	icache_disable ();
-	iflag = disable_interrupts ();
-
-	for (sector = s_first; (sector <= s_last) && (rc == ERR_OK); sector++) {
-
-		if (info->protect[sector])
-		{
-			putc('P'); /*  protected sector will not erase */
-		}
-		else
-		{
-			/* erase on unprotected sector */
-			puts("E\b");
-			switch (info->flash_id & FLASH_VENDMASK)
-			{
-			case (AMD_MANUFACT & FLASH_VENDMASK):
-				rc = amd_flash_erase_sector(info,sector);
-				break;
-			case (FREESCALE_MANUFACT & FLASH_VENDMASK):
-				rc = cfm_flash_erase_sector(info,sector);
-				break;
-			default:
-				return ERR_UNKNOWN_FLASH_VENDOR;
-			}
-			putc('.');
-		}
-	}
-	if (rc!=ERR_OK)
-	{
-		printf ("\n   ");
-		flash_perror (rc);
-	}
-	else
-	{
-		printf (" done\n");
-	}
-
-	udelay (10000);	/* allow flash to settle - wait 10 ms */
-
-	if (iflag)
-		enable_interrupts ();
-
-	if (cflag)
-		icache_enable ();
-
-	return rc;
-}
-
-volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data)
-{
-	volatile u16 *addr;
-	ulong result;
-	int cflag, iflag;
-	int state;
-	ulong start;
-
-	/*
-	 * Check if Flash is (sufficiently) erased
-	 */
-	addr = (volatile u16 *) dest;
-
-	result = *addr;
-	if ((result & data) != data)
-		return ERR_NOT_ERASED;
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-
-	cflag = icache_status ();
-	icache_disable ();
-	iflag = disable_interrupts ();
-
-	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-	MEM_FLASH_ADDR1 = CMD_PROGRAM;
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait until flash is ready */
-	state = 0;
-	do {
-		result = *addr;
-
-		/* check timeout */
-		if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-				state = ERR_TIMOUT;
-		}
-		if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK)))
-			state = ERR_READY;
-
-	} while (!state);
-
-	*addr = CMD_READ_ARRAY;
-
-	if (state == ERR_READY)
-		state = ERR_OK;
-	if ((*addr != data) && (state != ERR_TIMOUT))
-		state = ERR_PROG_ERROR;
-
-	if (iflag)
-		enable_interrupts ();
-
-	if (cflag)
-		icache_enable ();
-
-	return state;
-}
-
-int amd_flash_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	int rc;
-	ulong dest;
-	u16 data;
-
-	rc = ERR_OK;
-	if (addr & 1)
-	{
-		debug ("Byte alignment not supported\n");
-		rc = ERR_ALIGN;
-	}
-	if (cnt & 1)
-	{
-		debug ("Byte transfer not supported\n");
-		rc = ERR_ALIGN;
-	}
-
-	dest = addr;
-	while ((cnt>=2) && (rc == ERR_OK))
-	{
-		data = *((volatile u16 *) src);
-		rc=amd_write_word (info,dest,data);
-		src +=2;
-		dest +=2;
-		cnt -=2;
-	}
-	return rc;
-}
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	int rc;
-
-	switch (info->flash_id & FLASH_VENDMASK)
-	{
-		case (AMD_MANUFACT & FLASH_VENDMASK):
-			rc = amd_flash_write_buff(info,src,addr,cnt);
-			break;
-		case (FREESCALE_MANUFACT & FLASH_VENDMASK):
-			rc = cfm_flash_write_buff(info,src,addr,cnt);
-			break;
-		default:
-			rc = ERR_UNKNOWN_FLASH_VENDOR;
-	}
-	return rc;
-
-}
-int amd_flash_protect(flash_info_t * info,long sector,int prot)
-{
-	int rc;
-	rc= ERR_OK;
-	if (prot)
-	{
-		info->protect[sector]=1;
-	}
-	else
-	{
-		info->protect[sector]=0;
-	}
-	return rc;
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-
-int flash_real_protect(flash_info_t * info,long sector,int prot)
-{
-	int rc;
-
-	switch (info->flash_id & FLASH_VENDMASK)
-	{
-		case (AMD_MANUFACT & FLASH_VENDMASK):
-			rc = amd_flash_protect(info,sector,prot);
-			break;
-		case (FREESCALE_MANUFACT & FLASH_VENDMASK):
-			rc = cfm_flash_protect(info,sector,prot);
-			break;
-		default:
-			rc = ERR_UNKNOWN_FLASH_VENDOR;
-	}
-	return rc;
-}
-
-#endif