arm: mvebu: Move SoC selection (A38X vs AXP) into Kconfig

Until now, the SoC selection for the ARCH_MVEBU platforms has been done
in the config header. Using CONFIG_ARMADA_XP in a non-clear way. As
it needed to get selected for AXP and A38x based boards. This patch
now changes this to move the SoC selection to Kconfig. And also
uses CONFIG_ARCH_MVEBU as a common define for both AXP and A38x.
This makes things a bit clearer - especially for new board additions.

Additionally the defines CONFIG_SYS_MVEBU_DDR_AXP and
CONFIG_SYS_MVEBU_DDR_A38X are replaced with the already available
CONFIG_ARMADA_38X and CONFIG_ARMADA_XP.

And CONFIG_DDR3 is removed, as its not referenced anywhere.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>

7 files changed, 26 insertions, 15 deletions

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 18283d1..3d15673 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -49,7 +49,7 @@ machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
 # TODO: rename CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOOD
 machine-$(CONFIG_KIRKWOOD)		+= kirkwood
-machine-$(CONFIG_ARMADA_XP)		+= mvebu
+machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 # TODO: rename CONFIG_TEGRA -> CONFIG_ARCH_TEGRA
 # TODO: rename CONFIG_ORION5X -> CONFIG_ARCH_ORION5X
 machine-$(CONFIG_ORION5X)		+= orion5x
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 9f4d46b..d96b2ae 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -1,20 +1,30 @@
 if ARCH_MVEBU
 
+config ARMADA_38X
+	bool
+
+config ARMADA_XP
+	bool
+
 choice
 	prompt "Marvell MVEBU (Armada XP/38x) board select"
 	optional
 
 config TARGET_CLEARFOG
 	bool "Support ClearFog"
+	select ARMADA_38X
 
 config TARGET_DB_88F6820_GP
 	bool "Support DB-88F6820-GP"
+	select ARMADA_38X
 
 config TARGET_DB_MV784MP_GP
 	bool "Support db-mv784mp-gp"
+	select ARMADA_XP
 
 config TARGET_MAXBCM
 	bool "Support maxbcm"
+	select ARMADA_XP
 
 endchoice
 
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 21c56a4..b96b81b 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -15,8 +15,8 @@ else
 obj-y	= cpu.o
 obj-y	+= dram.o
 ifndef CONFIG_SPL_BUILD
-obj-$(CONFIG_SYS_MVEBU_DDR_A38X) += ../../../drivers/ddr/marvell/a38x/xor.o
-obj-$(CONFIG_SYS_MVEBU_DDR_AXP) += ../../../drivers/ddr/marvell/axp/xor.o
+obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o
+obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o
 endif
 obj-y	+= gpio.o
 obj-y	+= mbus.o
@@ -24,7 +24,7 @@ obj-y	+= timer.o
 obj-$(CONFIG_SPL_BUILD) += spl.o
 obj-$(CONFIG_SPL_BUILD) += lowlevel_spl.o
 
-obj-$(CONFIG_SYS_MVEBU_DDR_A38X) += serdes/a38x/
-obj-$(CONFIG_SYS_MVEBU_DDR_AXP)	+= serdes/axp/
+obj-$(CONFIG_ARMADA_38X) += serdes/a38x/
+obj-$(CONFIG_ARMADA_XP) += serdes/axp/
 
 endif
diff --git a/arch/arm/mach-mvebu/dram.c b/arch/arm/mach-mvebu/dram.c
index 059151a..a8ec5ea 100644
--- a/arch/arm/mach-mvebu/dram.c
+++ b/arch/arm/mach-mvebu/dram.c
@@ -12,11 +12,8 @@
 #include <asm/arch/cpu.h>
 #include <asm/arch/soc.h>
 
-#ifdef CONFIG_SYS_MVEBU_DDR_A38X
-#include "../../../drivers/ddr/marvell/axp/xor.h"
-#include "../../../drivers/ddr/marvell/axp/xor_regs.h"
-#endif
-#ifdef CONFIG_SYS_MVEBU_DDR_AXP
+#if defined(CONFIG_ARCH_MVEBU)
+/* Use common XOR definitions for A3x and AXP */
 #include "../../../drivers/ddr/marvell/axp/xor.h"
 #include "../../../drivers/ddr/marvell/axp/xor_regs.h"
 #endif
@@ -112,7 +109,7 @@ void mvebu_sdram_size_adjust(enum memory_bank bank)
 	mvebu_sdram_bs_set(bank, size);
 }
 
-#if defined(CONFIG_SYS_MVEBU_DDR_A38X) || defined(CONFIG_SYS_MVEBU_DDR_AXP)
+#if defined(CONFIG_ARCH_MVEBU)
 static u32 xor_ctrl_save;
 static u32 xor_base_save;
 static u32 xor_mask_save;
@@ -292,7 +289,7 @@ void dram_init_banksize(void)
 	}
 }
 
-#if defined(CONFIG_ARMADA_XP)
+#if defined(CONFIG_ARCH_MVEBU)
 void board_add_ram_info(int use_default)
 {
 	struct sar_freq_modes sar_freq;
diff --git a/arch/arm/mach-mvebu/include/mach/config.h b/arch/arm/mach-mvebu/include/mach/config.h
index c282fcb..cc1fc5f 100644
--- a/arch/arm/mach-mvebu/include/mach/config.h
+++ b/arch/arm/mach-mvebu/include/mach/config.h
@@ -17,7 +17,11 @@
 
 #include <asm/arch/soc.h>
 
-#if defined(CONFIG_ARMADA_XP)
+#if defined(CONFIG_ARMADA_XP) || defined(CONFIG_ARMADA_38X)
+/*
+ * Set this for the common xor register definitions needed in dram.c
+ * for A38x as well here.
+ */
 #define MV88F78X60 /* for the DDR training bin_hdr code */
 #endif
 
diff --git a/arch/arm/mach-mvebu/mbus.c b/arch/arm/mach-mvebu/mbus.c
index 346278e..df263bc 100644
--- a/arch/arm/mach-mvebu/mbus.c
+++ b/arch/arm/mach-mvebu/mbus.c
@@ -491,7 +491,7 @@ int mvebu_mbus_probe(struct mbus_win windows[], int count)
 #if defined(CONFIG_KIRKWOOD)
 	mbus_state.soc = &kirkwood_mbus_data;
 #endif
-#if defined(CONFIG_ARMADA_XP)
+#if defined(CONFIG_ARCH_MVEBU)
 	mbus_state.soc = &armada_370_xp_mbus_data;
 #endif
 
diff --git a/arch/arm/mach-mvebu/timer.c b/arch/arm/mach-mvebu/timer.c
index aef2df2..f5c2eaa 100644
--- a/arch/arm/mach-mvebu/timer.c
+++ b/arch/arm/mach-mvebu/timer.c
@@ -31,7 +31,7 @@ int timer_init(void)
 	writel(TIMER_LOAD_VAL, MVEBU_TIMER_BASE + 0x10);
 	writel(TIMER_LOAD_VAL, MVEBU_TIMER_BASE + 0x14);
 
-#if defined(CONFIG_ARMADA_XP)
+#if defined(CONFIG_ARCH_MVEBU)
 	/* On Armada XP / 38x ..., the 25MHz clock source needs to be enabled */
 	setbits_le32(MVEBU_TIMER_BASE + 0x00, BIT(11));
 #endif