Various, unrelated tree-wide typo fixes.

    Fix a number of typos, including:

     * "compatble" -> "compatible"
     * "eanbeld" -> "enabled"
     * "envrionment" -> "environment"
     * "FTD" -> "FDT" (for "flattened device tree")
     * "ommitted" -> "omitted"
     * "overriden" -> "overridden"
     * "partiton" -> "partition"
     * "propogate" -> "propagate"
     * "resourse" -> "resource"
     * "rest in piece" -> "rest in peace"
     * "suport" -> "support"
     * "varible" -> "variable"

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

11 files changed, 11 insertions, 11 deletions

diff --git a/arch/arm/cpu/armv7/Kconfig b/arch/arm/cpu/armv7/Kconfig
index afeaac8..bd6108e 100644
--- a/arch/arm/cpu/armv7/Kconfig
+++ b/arch/arm/cpu/armv7/Kconfig
@@ -21,7 +21,7 @@ config ARMV7_BOOT_SEC_DEFAULT
 	Say Y here to boot in secure mode by default even if non-secure mode
 	is supported. This option is useful to boot kernels which do not
 	suppport booting in non-secure mode. Only set this if you need it.
-	This can be overriden at run-time by setting the bootm_boot_mode env.
+	This can be overridden at run-time by setting the bootm_boot_mode env.
 	variable to "sec" or "nonsec".
 
 config ARMV7_VIRT
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3
index da5e052..7867c37 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3
+++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3
@@ -128,7 +128,7 @@ mcinitcmd:	This environment variable is defined to initiate MC and DPL deploymen
 		during U-boot booting.However the MC, DPC and DPL can be applied from
 		console independently.
 		The variable needs to be set from the console once and then on
-		rebooting the parameters set in the varible will automatically be
+		rebooting the parameters set in the variable will automatically be
 		executed. The commmand is demostrated taking an example of mc boot
 		using NOR Flash i.e. MC, DPL, and DPC is stored in the NOR flash:
 
diff --git a/arch/arm/cpu/armv8/zynqmp/mp.c b/arch/arm/cpu/armv8/zynqmp/mp.c
index 58312a7..e10fc31 100644
--- a/arch/arm/cpu/armv8/zynqmp/mp.c
+++ b/arch/arm/cpu/armv8/zynqmp/mp.c
@@ -128,7 +128,7 @@ static void enable_clock_r5(void)
 	writel(tmp, &crlapb_base->cpu_r5_ctrl);
 
 	/* Give some delay for clock
-	 * to propogate */
+	 * to propagate */
 	udelay(0x500);
 }
 
diff --git a/arch/arm/imx-common/ddrmc-vf610.c b/arch/arm/imx-common/ddrmc-vf610.c
index daf3c7e..9bc56f6 100644
--- a/arch/arm/imx-common/ddrmc-vf610.c
+++ b/arch/arm/imx-common/ddrmc-vf610.c
@@ -212,7 +212,7 @@ void ddrmc_ctrl_init_ddr3(struct ddr3_jedec_timings const *timings,
 			cr_setting++;
 		}
 
-	/* perform default PHY settings (may be overriden by custom settings */
+	/* perform default PHY settings (may be overridden by custom settings */
 	phy_setting = default_phy_settings;
 	while (phy_setting->phy_rnum >= 0) {
 		writel(phy_setting->setting,
diff --git a/arch/arm/include/asm/arch-tegra/board.h b/arch/arm/include/asm/arch-tegra/board.h
index 783bb3c..a3db7ed 100644
--- a/arch/arm/include/asm/arch-tegra/board.h
+++ b/arch/arm/include/asm/arch-tegra/board.h
@@ -20,7 +20,7 @@ void gpio_early_init(void);  /* overrideable GPIO config        */
 /*
  * Hooks to allow boards to set up the pinmux for a specific function.
  * Has to be implemented in the board files as we don't yet support pinmux
- * setup from FTD. If a board file does not implement one of those functions
+ * setup from FDT. If a board file does not implement one of those functions
  * an empty stub function will be called.
  */
 
diff --git a/arch/arm/include/asm/arch-tegra/clock.h b/arch/arm/include/asm/arch-tegra/clock.h
index e56031d..7daf8bc 100644
--- a/arch/arm/include/asm/arch-tegra/clock.h
+++ b/arch/arm/include/asm/arch-tegra/clock.h
@@ -324,7 +324,7 @@ enum periph_id clk_id_to_periph_id(int clk_id);
  * @param p post divider(DIVP)
  * @param cpcon base PLL charge pump(CPCON)
  * @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
- *              be overriden), 1 if PLL is already correct
+ *              be overridden), 1 if PLL is already correct
  */
 int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon);
 
diff --git a/arch/arm/include/asm/arch-tegra124/display.h b/arch/arm/include/asm/arch-tegra124/display.h
index ca6644a..c522faa 100644
--- a/arch/arm/include/asm/arch-tegra124/display.h
+++ b/arch/arm/include/asm/arch-tegra124/display.h
@@ -11,7 +11,7 @@
 /**
  * Register a new display based on device tree configuration.
  *
- * The frame buffer can be positioned by U-Boot or overriden by the fdt.
+ * The frame buffer can be positioned by U-Boot or overridden by the fdt.
  * You should pass in the U-Boot address here, and check the contents of
  * struct fdt_disp_config to see what was actually chosen.
  *
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index c50d56d..36eabc8 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -510,7 +510,7 @@ unsigned clock_get_rate(enum clock_id clkid)
  * @param p post divider(DIVP)
  * @param cpcon base PLL charge pump(CPCON)
  * @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
- *		be overriden), 1 if PLL is already correct
+ *		be overridden), 1 if PLL is already correct
  */
 int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon)
 {
diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c
index 88c8e65..0addf84 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.c
+++ b/arch/powerpc/cpu/mpc85xx/mp.c
@@ -30,7 +30,7 @@ u32 get_my_id()
  */
 int hold_cores_in_reset(int verbose)
 {
-	/* Default to no, overriden by 'y', 'yes', 'Y', 'Yes', or '1' */
+	/* Default to no, overridden by 'y', 'yes', 'Y', 'Yes', or '1' */
 	if (getenv_yesno("mp_holdoff") == 1) {
 		if (verbose) {
 			puts("Secondary cores are being held in reset.\n");
diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S
index b432b18..5647d71 100644
--- a/arch/powerpc/cpu/ppc4xx/start.S
+++ b/arch/powerpc/cpu/ppc4xx/start.S
@@ -144,7 +144,7 @@
 #endif
 
 /*
- * Unless otherwise overriden, enable two 128MB cachable instruction regions
+ * Unless otherwise overridden, enable two 128MB cachable instruction regions
  * at CONFIG_SYS_SDRAM_BASE and another 128MB cacheable instruction region covering
  * NOR flash at CONFIG_SYS_FLASH_BASE. Disable all cacheable data regions.
  */
diff --git a/arch/powerpc/include/asm/status_led.h b/arch/powerpc/include/asm/status_led.h
index 4416190..260a831 100644
--- a/arch/powerpc/include/asm/status_led.h
+++ b/arch/powerpc/include/asm/status_led.h
@@ -7,7 +7,7 @@
 #ifndef __ASM_STATUS_LED_H__
 #define __ASM_STATUS_LED_H__
 
-/* if not overriden */
+/* if not overridden */
 #ifndef CONFIG_BOARD_SPECIFIC_LED
 # if defined(CONFIG_8xx)
 #  include <mpc8xx.h>