x86: tsc: Remove legacy timer codes

Now that we have converted all x86 boards to use driver model timer,
remove these legacy timer codes in the tsc driver.

Note this also removes the TSC_CALIBRATION_BYPASS Kconfig option,
as it is not needed with driver model.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

5 files changed, 0 insertions, 80 deletions

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 14ab98e..16ba4f4 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -279,26 +279,6 @@ config AP_STACK_SIZE
 	  the memory used by this initialisation process. Typically 4KB is
 	  enough space.
 
-config TSC_CALIBRATION_BYPASS
-	bool "Bypass Time-Stamp Counter (TSC) calibration"
-	default n
-	help
-	  By default U-Boot automatically calibrates Time-Stamp Counter (TSC)
-	  running frequency via Model-Specific Register (MSR) and Programmable
-	  Interval Timer (PIT). If the calibration does not work on your board,
-	  select this option and provide a hardcoded TSC running frequency with
-	  CONFIG_TSC_FREQ_IN_MHZ below.
-
-	  Normally this option should be turned on in a simulation environment
-	  like qemu.
-
-config TSC_FREQ_IN_MHZ
-	int "Time-Stamp Counter (TSC) running frequency in MHz"
-	depends on TSC_CALIBRATION_BYPASS
-	default 1000
-	help
-	  The running frequency in MHz of Time-Stamp Counter (TSC).
-
 config HAVE_VGA_BIOS
 	bool "Add a VGA BIOS image"
 	help
diff --git a/arch/x86/cpu/qemu/Kconfig b/arch/x86/cpu/qemu/Kconfig
index fb775d7..4f98621 100644
--- a/arch/x86/cpu/qemu/Kconfig
+++ b/arch/x86/cpu/qemu/Kconfig
@@ -6,7 +6,6 @@
 
 config QEMU
 	bool
-	select TSC_CALIBRATION_BYPASS
 
 if QEMU
 
diff --git a/arch/x86/cpu/quark/Kconfig b/arch/x86/cpu/quark/Kconfig
index bc961ef..163caac 100644
--- a/arch/x86/cpu/quark/Kconfig
+++ b/arch/x86/cpu/quark/Kconfig
@@ -7,7 +7,6 @@
 config INTEL_QUARK
 	bool
 	select HAVE_RMU
-	select TSC_CALIBRATION_BYPASS
 
 if INTEL_QUARK
 
@@ -119,8 +118,4 @@ config SYS_CAR_SIZE
 	  Space in bytes in eSRAM used as Cache-As-ARM (CAR).
 	  Note this size must not exceed eSRAM's total size.
 
-config TSC_FREQ_IN_MHZ
-	int
-	default 400
-
 endif
diff --git a/arch/x86/include/asm/global_data.h b/arch/x86/include/asm/global_data.h
index 5966b7c..0ca518c 100644
--- a/arch/x86/include/asm/global_data.h
+++ b/arch/x86/include/asm/global_data.h
@@ -54,7 +54,6 @@ struct arch_global_data {
 	uint8_t x86_mask;
 	uint32_t x86_device;
 	uint64_t tsc_base;		/* Initial value returned by rdtsc() */
-	uint32_t tsc_mhz;		/* TSC frequency in MHz */
 	void *new_fdt;			/* Relocated FDT */
 	uint32_t bist;			/* Built-in self test value */
 	enum pei_boot_mode_t pei_boot_mode;
diff --git a/arch/x86/lib/tsc_timer.c b/arch/x86/lib/tsc_timer.c
index 4a95959..6aa2437 100644
--- a/arch/x86/lib/tsc_timer.c
+++ b/arch/x86/lib/tsc_timer.c
@@ -280,63 +280,12 @@ success:
 	return delta / 1000;
 }
 
-#ifndef CONFIG_TIMER
-void timer_set_base(u64 base)
-{
-	gd->arch.tsc_base = base;
-}
-
-/*
- * Get the number of CPU time counter ticks since it was read first time after
- * restart. This yields a free running counter guaranteed to take almost 6
- * years to wrap around even at 100GHz clock rate.
- */
-u64 notrace get_ticks(void)
-{
-	u64 now_tick = rdtsc();
-
-	/* We assume that 0 means the base hasn't been set yet */
-	if (!gd->arch.tsc_base)
-		panic("No tick base available");
-	return now_tick - gd->arch.tsc_base;
-}
-#endif /* CONFIG_TIMER */
-
 /* Get the speed of the TSC timer in MHz */
 unsigned notrace long get_tbclk_mhz(void)
 {
-#ifdef CONFIG_TIMER
 	return get_tbclk() / 1000000;
-#else
-	unsigned long fast_calibrate;
-
-	if (gd->arch.tsc_mhz)
-		return gd->arch.tsc_mhz;
-
-#ifdef CONFIG_TSC_CALIBRATION_BYPASS
-	fast_calibrate = CONFIG_TSC_FREQ_IN_MHZ;
-#else
-	fast_calibrate = try_msr_calibrate_tsc();
-	if (!fast_calibrate) {
-
-		fast_calibrate = quick_pit_calibrate();
-		if (!fast_calibrate)
-			panic("TSC frequency is ZERO");
-	}
-#endif
-
-	gd->arch.tsc_mhz = fast_calibrate;
-	return fast_calibrate;
-#endif
 }
 
-#ifndef CONFIG_TIMER
-unsigned long get_tbclk(void)
-{
-	return get_tbclk_mhz() * 1000 * 1000;
-}
-#endif
-
 static ulong get_ms_timer(void)
 {
 	return (get_ticks() * 1000) / get_tbclk();
@@ -386,7 +335,6 @@ int timer_init(void)
 	return 0;
 }
 
-#ifdef CONFIG_TIMER
 static int tsc_timer_get_count(struct udevice *dev, u64 *count)
 {
 	u64 now_tick = rdtsc();
@@ -439,4 +387,3 @@ U_BOOT_DRIVER(tsc_timer) = {
 	.ops	= &tsc_timer_ops,
 	.flags = DM_FLAG_PRE_RELOC,
 };
-#endif /* CONFIG_TIMER */