Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq

16 files changed, 393 insertions, 109 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c0b68cb..2b0d2c9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -733,12 +733,14 @@ config TARGET_LS2085A_SIMU
 	select ARM64
 
 config TARGET_LS1021AQDS
-	bool "Support ls1021aqds_nor"
+	bool "Support ls1021aqds"
 	select CPU_V7
+	select SUPPORT_SPL
 
 config TARGET_LS1021ATWR
-	bool "Support ls1021atwr_nor"
+	bool "Support ls1021atwr"
 	select CPU_V7
+	select SUPPORT_SPL
 
 config TARGET_BALLOON3
 	bool "Support balloon3"
diff --git a/arch/arm/cpu/armv7/ls102xa/Makefile b/arch/arm/cpu/armv7/ls102xa/Makefile
index d82ce8d..2e6a207 100644
--- a/arch/arm/cpu/armv7/ls102xa/Makefile
+++ b/arch/arm/cpu/armv7/ls102xa/Makefile
@@ -7,6 +7,8 @@
 obj-y	+= cpu.o
 obj-y	+= clock.o
 obj-y	+= timer.o
+obj-y	+= fsl_epu.o
 
 obj-$(CONFIG_OF_LIBFDT) += fdt.o
 obj-$(CONFIG_SYS_HAS_SERDES) += fsl_ls1_serdes.o ls102xa_serdes.o
+obj-$(CONFIG_SPL) += spl.o
diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c
index b7dde45..ce2d92f 100644
--- a/arch/arm/cpu/armv7/ls102xa/cpu.c
+++ b/arch/arm/cpu/armv7/ls102xa/cpu.c
@@ -12,6 +12,8 @@
 #include <netdev.h>
 #include <fsl_esdhc.h>
 
+#include "fsl_epu.h"
+
 DECLARE_GLOBAL_DATA_PTR;
 
 #if defined(CONFIG_DISPLAY_CPUINFO)
@@ -101,3 +103,35 @@ int cpu_eth_init(bd_t *bis)
 
 	return 0;
 }
+
+int arch_cpu_init(void)
+{
+	void *epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
+
+	/*
+	 * After wakeup from deep sleep, Clear EPU registers
+	 * as early as possible to prevent from possible issue.
+	 * It's also safe to clear at normal boot.
+	 */
+	fsl_epu_clean(epu_base);
+
+	return 0;
+}
+
+#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
+/* Set the address at which the secondary core starts from.*/
+void smp_set_core_boot_addr(unsigned long addr, int corenr)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+
+	out_be32(&gur->scratchrw[0], addr);
+}
+
+/* Release the secondary core from holdoff state and kick it */
+void smp_kick_all_cpus(void)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+
+	out_be32(&gur->brrl, 0x2);
+}
+#endif
diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c
index 4ce3808..989780d 100644
--- a/arch/arm/cpu/armv7/ls102xa/fdt.c
+++ b/arch/arm/cpu/armv7/ls102xa/fdt.c
@@ -91,7 +91,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	}
 
 	do_fixup_by_prop_u32(blob, "device_type", "soc",
-			     4, "bus-frequency", busclk / 2, 1);
+			     4, "bus-frequency", busclk, 1);
 
 	ft_fixup_enet_phy_connect_type(blob);
 
diff --git a/arch/arm/cpu/armv7/ls102xa/fsl_epu.c b/arch/arm/cpu/armv7/ls102xa/fsl_epu.c
new file mode 100644
index 0000000..6212640
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/fsl_epu.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#include "fsl_epu.h"
+
+/**
+ * fsl_epu_clean - Clear EPU registers
+ */
+void fsl_epu_clean(void *epu_base)
+{
+	u32 offset;
+
+	/* follow the exact sequence to clear the registers */
+	/* Clear EPACRn */
+	for (offset = EPACR0; offset <= EPACR15; offset += EPACR_STRIDE)
+		out_be32(epu_base + offset, 0);
+
+	/* Clear EPEVTCRn */
+	for (offset = EPEVTCR0; offset <= EPEVTCR9; offset += EPEVTCR_STRIDE)
+		out_be32(epu_base + offset, 0);
+
+	/* Clear EPGCR */
+	out_be32(epu_base + EPGCR, 0);
+
+	/* Clear EPSMCRn */
+	for (offset = EPSMCR0; offset <= EPSMCR15; offset += EPSMCR_STRIDE)
+		out_be32(epu_base + offset, 0);
+
+	/* Clear EPCCRn */
+	for (offset = EPCCR0; offset <= EPCCR31; offset += EPCCR_STRIDE)
+		out_be32(epu_base + offset, 0);
+
+	/* Clear EPCMPRn */
+	for (offset = EPCMPR0; offset <= EPCMPR31; offset += EPCMPR_STRIDE)
+		out_be32(epu_base + offset, 0);
+
+	/* Clear EPCTRn */
+	for (offset = EPCTR0; offset <= EPCTR31; offset += EPCTR_STRIDE)
+		out_be32(epu_base + offset, 0);
+
+	/* Clear EPIMCRn */
+	for (offset = EPIMCR0; offset <= EPIMCR31; offset += EPIMCR_STRIDE)
+		out_be32(epu_base + offset, 0);
+
+	/* Clear EPXTRIGCRn */
+	out_be32(epu_base + EPXTRIGCR, 0);
+
+	/* Clear EPECRn */
+	for (offset = EPECR0; offset <= EPECR15; offset += EPECR_STRIDE)
+		out_be32(epu_base + offset, 0);
+}
diff --git a/arch/arm/cpu/armv7/ls102xa/fsl_epu.h b/arch/arm/cpu/armv7/ls102xa/fsl_epu.h
new file mode 100644
index 0000000..d658aad
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/fsl_epu.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __FSL_EPU_H
+#define __FSL_EPU_H
+
+#include <asm/types.h>
+
+#define FSL_STRIDE_4B	4
+#define FSL_STRIDE_8B	8
+
+/* Block offsets */
+#define EPU_BLOCK_OFFSET	0x00000000
+
+/* EPGCR (Event Processor Global Control Register) */
+#define EPGCR		0x000
+
+/* EPEVTCR0-9 (Event Processor EVT Pin Control Registers) */
+#define EPEVTCR0	0x050
+#define EPEVTCR9	0x074
+#define EPEVTCR_STRIDE	FSL_STRIDE_4B
+
+/* EPXTRIGCR (Event Processor Crosstrigger Control Register) */
+#define EPXTRIGCR	0x090
+
+/* EPIMCR0-31 (Event Processor Input Mux Control Registers) */
+#define EPIMCR0		0x100
+#define EPIMCR31	0x17C
+#define EPIMCR_STRIDE	FSL_STRIDE_4B
+
+/* EPSMCR0-15 (Event Processor SCU Mux Control Registers) */
+#define EPSMCR0		0x200
+#define EPSMCR15	0x278
+#define EPSMCR_STRIDE	FSL_STRIDE_8B
+
+/* EPECR0-15 (Event Processor Event Control Registers) */
+#define EPECR0		0x300
+#define EPECR15		0x33C
+#define EPECR_STRIDE	FSL_STRIDE_4B
+
+/* EPACR0-15 (Event Processor Action Control Registers) */
+#define EPACR0		0x400
+#define EPACR15		0x43C
+#define EPACR_STRIDE	FSL_STRIDE_4B
+
+/* EPCCRi0-15 (Event Processor Counter Control Registers) */
+#define EPCCR0		0x800
+#define EPCCR15		0x83C
+#define EPCCR31		0x87C
+#define EPCCR_STRIDE	FSL_STRIDE_4B
+
+/* EPCMPR0-15 (Event Processor Counter Compare Registers) */
+#define EPCMPR0		0x900
+#define EPCMPR15	0x93C
+#define EPCMPR31	0x97C
+#define EPCMPR_STRIDE	FSL_STRIDE_4B
+
+/* EPCTR0-31 (Event Processor Counter Register) */
+#define EPCTR0		0xA00
+#define EPCTR31		0xA7C
+#define EPCTR_STRIDE	FSL_STRIDE_4B
+
+void fsl_epu_clean(void *epu_base);
+
+#endif
diff --git a/arch/arm/cpu/armv7/ls102xa/spl.c b/arch/arm/cpu/armv7/ls102xa/spl.c
new file mode 100644
index 0000000..1dfbf54
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/spl.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+
+u32 spl_boot_device(void)
+{
+#ifdef CONFIG_SPL_MMC_SUPPORT
+	return BOOT_DEVICE_MMC1;
+#endif
+	return BOOT_DEVICE_NAND;
+}
+
+u32 spl_boot_mode(void)
+{
+	switch (spl_boot_device()) {
+	case BOOT_DEVICE_MMC1:
+#ifdef CONFIG_SPL_FAT_SUPPORT
+		return MMCSD_MODE_FAT;
+#else
+		return MMCSD_MODE_RAW;
+#endif
+	case BOOT_DEVICE_NAND:
+		return 0;
+	default:
+		puts("spl: error: unsupported device\n");
+		hang();
+	}
+}
diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S
index 745670e..30d81db 100644
--- a/arch/arm/cpu/armv7/nonsec_virt.S
+++ b/arch/arm/cpu/armv7/nonsec_virt.S
@@ -169,11 +169,11 @@ ENTRY(_nonsec_init)
  * we do this here instead.
  * But first check if we have the generic timer.
  */
-#ifdef CONFIG_SYS_CLK_FREQ
+#ifdef CONFIG_TIMER_CLK_FREQ
 	mrc	p15, 0, r0, c0, c1, 1		@ read ID_PFR1
 	and	r0, r0, #CPUID_ARM_GENTIMER_MASK	@ mask arch timer bits
 	cmp	r0, #(1 << CPUID_ARM_GENTIMER_SHIFT)
-	ldreq	r1, =CONFIG_SYS_CLK_FREQ
+	ldreq	r1, =CONFIG_TIMER_CLK_FREQ
 	mcreq	p15, 0, r1, c14, c0, 0		@ write CNTFRQ
 #endif
 
@@ -191,6 +191,9 @@ ENTRY(smp_waitloop)
 	wfi
 	ldr	r1, =CONFIG_SMP_PEN_ADDR	@ load start address
 	ldr	r1, [r1]
+#ifdef CONFIG_PEN_ADDR_BIG_ENDIAN
+	rev	r1, r1
+#endif
 	cmp	r0, r1			@ make sure we dont execute this code
 	beq	smp_waitloop		@ again (due to a spurious wakeup)
 	mov	r0, r1
diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds
index a69b006..a8be204 100644
--- a/arch/arm/cpu/u-boot-spl.lds
+++ b/arch/arm/cpu/u-boot-spl.lds
@@ -32,6 +32,9 @@ SECTIONS
 	}
 
 	. = ALIGN(4);
+	.u_boot_list : {
+		KEEP(*(SORT(.u_boot_list*_i2c_*)));
+	}
 
 	. = .;
 #ifdef CONFIG_SPL_DM
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index ba86eea..5e934da 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -11,11 +11,17 @@
 
 #define OCRAM_BASE_ADDR				0x10000000
 #define OCRAM_SIZE				0x00020000
+#define OCRAM_BASE_S_ADDR			0x10010000
+#define OCRAM_S_SIZE				0x00010000
 
 #define CONFIG_SYS_IMMR				0x01000000
+#define CONFIG_SYS_DCSRBAR			0x20000000
+
+#define CONFIG_SYS_DCSR_DCFG_ADDR	(CONFIG_SYS_DCSRBAR + 0x00220000)
 
 #define CONFIG_SYS_FSL_DDR_ADDR			(CONFIG_SYS_IMMR + 0x00080000)
 #define CONFIG_SYS_CCI400_ADDR			(CONFIG_SYS_IMMR + 0x00180000)
+#define CONFIG_SYS_FSL_CSU_ADDR                 (CONFIG_SYS_IMMR + 0x00510000)
 #define CONFIG_SYS_IFC_ADDR			(CONFIG_SYS_IMMR + 0x00530000)
 #define CONFIG_SYS_FSL_ESDHC_ADDR		(CONFIG_SYS_IMMR + 0x00560000)
 #define CONFIG_SYS_FSL_SCFG_ADDR		(CONFIG_SYS_IMMR + 0x00570000)
@@ -52,6 +58,9 @@
 
 #define LPUART_BASE				(CONFIG_SYS_IMMR + 0x01950000)
 
+#define CONFIG_SYS_PCIE1_ADDR			(CONFIG_SYS_IMMR + 0x2400000)
+#define CONFIG_SYS_PCIE2_ADDR			(CONFIG_SYS_IMMR + 0x2500000)
+
 #ifdef CONFIG_DDR_SPD
 #define CONFIG_SYS_FSL_DDR_BE
 #define CONFIG_VERY_BIG_RAM
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
index b0c267c..697d4ca 100644
--- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -17,6 +17,9 @@
 #define SOC_VER_LS1021		0x11
 #define SOC_VER_LS1022		0x12
 
+#define CCSR_BRR_OFFSET		0xe4
+#define CCSR_SCRATCHRW1_OFFSET	0x200
+
 #define RCWSR0_SYS_PLL_RAT_SHIFT	25
 #define RCWSR0_SYS_PLL_RAT_MASK		0x1f
 #define RCWSR0_MEM_PLL_RAT_SHIFT	16
@@ -29,6 +32,11 @@
 #define ARCH_TIMER_CTRL_ENABLE		(1 << 0)
 #define SYS_COUNTER_CTRL_ENABLE		(1 << 24)
 
+#define DCFG_CCSR_PORSR1_RCW_MASK	0xff800000
+#define DCFG_CCSR_PORSR1_RCW_SRC_I2C	0x24800000
+
+#define DCFG_DCSR_PORCR1		0
+
 struct sys_info {
 	unsigned long freq_processor[CONFIG_MAX_CPUS];
 	unsigned long freq_systembus;
@@ -98,6 +106,7 @@ struct ccsr_gur {
 #define SCFG_ETSECDMAMCR_LE_BD_FR	0xf8001a0f
 #define SCFG_ETSECCMCR_GE2_CLK125	0x04000000
 #define SCFG_PIXCLKCR_PXCKEN		0x80000000
+#define SCFG_QSPI_CLKSEL		0xc0100000
 
 /* Supplemental Configuration Unit */
 struct ccsr_scfg {
diff --git a/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h b/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
new file mode 100644
index 0000000..abd70fc
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __FSL_LS102XA_STREAM_ID_H_
+#define __FSL_LS102XA_STREAM_ID_H_
+
+struct smmu_stream_id {
+	uint16_t offset;
+	uint16_t stream_id;
+	char dev_name[32];
+};
+
+void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num);
+#endif
diff --git a/arch/arm/include/asm/arch-ls102xa/ns_access.h b/arch/arm/include/asm/arch-ls102xa/ns_access.h
new file mode 100644
index 0000000..b53f699
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/ns_access.h
@@ -0,0 +1,118 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __FSL_NS_ACCESS_H_
+#define __FSL_NS_ACCESS_H_
+
+enum csu_cslx_access {
+	CSU_NS_SUP_R = 0x08,
+	CSU_NS_SUP_W = 0x80,
+	CSU_NS_SUP_RW = 0x88,
+	CSU_NS_USER_R = 0x04,
+	CSU_NS_USER_W = 0x40,
+	CSU_NS_USER_RW = 0x44,
+	CSU_S_SUP_R = 0x02,
+	CSU_S_SUP_W = 0x20,
+	CSU_S_SUP_RW = 0x22,
+	CSU_S_USER_R = 0x01,
+	CSU_S_USER_W = 0x10,
+	CSU_S_USER_RW = 0x11,
+	CSU_ALL_RW = 0xff,
+};
+
+enum csu_cslx_ind {
+	CSU_CSLX_PCIE2_IO = 0,
+	CSU_CSLX_PCIE1_IO,
+	CSU_CSLX_MG2TPR_IP,
+	CSU_CSLX_IFC_MEM,
+	CSU_CSLX_OCRAM,
+	CSU_CSLX_GIC,
+	CSU_CSLX_PCIE1,
+	CSU_CSLX_OCRAM2,
+	CSU_CSLX_QSPI_MEM,
+	CSU_CSLX_PCIE2,
+	CSU_CSLX_SATA,
+	CSU_CSLX_USB3,
+	CSU_CSLX_SERDES = 32,
+	CSU_CSLX_QDMA,
+	CSU_CSLX_LPUART2,
+	CSU_CSLX_LPUART1,
+	CSU_CSLX_LPUART4,
+	CSU_CSLX_LPUART3,
+	CSU_CSLX_LPUART6,
+	CSU_CSLX_LPUART5,
+	CSU_CSLX_DSPI2 = 40,
+	CSU_CSLX_DSPI1,
+	CSU_CSLX_QSPI,
+	CSU_CSLX_ESDHC,
+	CSU_CSLX_2D_ACE,
+	CSU_CSLX_IFC,
+	CSU_CSLX_I2C1,
+	CSU_CSLX_USB2,
+	CSU_CSLX_I2C3,
+	CSU_CSLX_I2C2,
+	CSU_CSLX_DUART2 = 50,
+	CSU_CSLX_DUART1,
+	CSU_CSLX_WDT2,
+	CSU_CSLX_WDT1,
+	CSU_CSLX_EDMA,
+	CSU_CSLX_SYS_CNT,
+	CSU_CSLX_DMA_MUX2,
+	CSU_CSLX_DMA_MUX1,
+	CSU_CSLX_DDR,
+	CSU_CSLX_QUICC,
+	CSU_CSLX_DCFG_CCU_RCPM = 60,
+	CSU_CSLX_SECURE_BOOTROM,
+	CSU_CSLX_SFP,
+	CSU_CSLX_TMU,
+	CSU_CSLX_SECURE_MONITOR,
+	CSU_CSLX_RESERVED0,
+	CSU_CSLX_ETSEC1,
+	CSU_CSLX_SEC5_5,
+	CSU_CSLX_ETSEC3,
+	CSU_CSLX_ETSEC2,
+	CSU_CSLX_GPIO2 = 70,
+	CSU_CSLX_GPIO1,
+	CSU_CSLX_GPIO4,
+	CSU_CSLX_GPIO3,
+	CSU_CSLX_PLATFORM_CONT,
+	CSU_CSLX_CSU,
+	CSU_CSLX_ASRC,
+	CSU_CSLX_SPDIF,
+	CSU_CSLX_FLEXCAN2,
+	CSU_CSLX_FLEXCAN1,
+	CSU_CSLX_FLEXCAN4 = 80,
+	CSU_CSLX_FLEXCAN3,
+	CSU_CSLX_SAI2,
+	CSU_CSLX_SAI1,
+	CSU_CSLX_SAI4,
+	CSU_CSLX_SAI3,
+	CSU_CSLX_FTM2,
+	CSU_CSLX_FTM1,
+	CSU_CSLX_FTM4,
+	CSU_CSLX_FTM3,
+	CSU_CSLX_FTM6 = 90,
+	CSU_CSLX_FTM5,
+	CSU_CSLX_FTM8,
+	CSU_CSLX_FTM7,
+	CSU_CSLX_COP_DCSR,
+	CSU_CSLX_EPU,
+	CSU_CSLX_GDI,
+	CSU_CSLX_DDI,
+	CSU_CSLX_RESERVED1,
+	CSU_CSLX_USB3_PHY = 117,
+	CSU_CSLX_RESERVED2,
+	CSU_CSLX_MAX,
+};
+
+struct csu_ns_dev {
+	unsigned long ind;
+	uint32_t val;
+};
+
+void enable_devices_ns_access(struct csu_ns_dev *ns_dev, uint32_t num);
+
+#endif
diff --git a/arch/arm/include/asm/arch-ls102xa/spl.h b/arch/arm/include/asm/arch-ls102xa/spl.h
new file mode 100644
index 0000000..26e4ea1
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/spl.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_SPL_H__
+#define __ASM_ARCH_SPL_H__
+
+#define BOOT_DEVICE_NONE	0
+#define BOOT_DEVICE_XIP		1
+#define BOOT_DEVICE_XIPWAIT	2
+#define BOOT_DEVICE_NAND	3
+#define BOOT_DEVICE_ONENAND	4
+#define BOOT_DEVICE_MMC1	5
+#define BOOT_DEVICE_MMC2	6
+#define BOOT_DEVICE_MMC2_2	7
+#define BOOT_DEVICE_SPI		10
+
+#endif	/* __ASM_ARCH_SPL_H__ */
diff --git a/arch/arm/include/asm/pcie_layerscape.h b/arch/arm/include/asm/pcie_layerscape.h
new file mode 100644
index 0000000..fb08578
--- /dev/null
+++ b/arch/arm/include/asm/pcie_layerscape.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __PCIE_LAYERSCAPE_H_
+#define __PCIE_LAYERSCAPE_H_
+
+void pci_init_board(void);
+void ft_pcie_setup(void *blob, bd_t *bd);
+
+#endif
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index c6b4d95..1c63f93 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -73,110 +73,6 @@ void ft_fixup_num_cores(void *blob) {
 }
 #endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */
 
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
-static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
-				const char *phy_type, int start_offset)
-{
-	const char *compat_dr = "fsl-usb2-dr";
-	const char *compat_mph = "fsl-usb2-mph";
-	const char *prop_mode = "dr_mode";
-	const char *prop_type = "phy_type";
-	const char *node_type = NULL;
-	int node_offset;
-	int err;
-
-	node_offset = fdt_node_offset_by_compatible(blob,
-			start_offset, compat_mph);
-	if (node_offset < 0) {
-		node_offset = fdt_node_offset_by_compatible(blob,
-			start_offset, compat_dr);
-		if (node_offset < 0) {
-			printf("WARNING: could not find compatible"
-				" node %s or %s: %s.\n", compat_mph,
-				compat_dr, fdt_strerror(node_offset));
-			return -1;
-		} else
-			node_type = compat_dr;
-	} else
-		node_type = compat_mph;
-
-	if (mode) {
-		err = fdt_setprop(blob, node_offset, prop_mode, mode,
-				  strlen(mode) + 1);
-		if (err < 0)
-			printf("WARNING: could not set %s for %s: %s.\n",
-			       prop_mode, node_type, fdt_strerror(err));
-	}
-
-	if (phy_type) {
-		err = fdt_setprop(blob, node_offset, prop_type, phy_type,
-				  strlen(phy_type) + 1);
-		if (err < 0)
-			printf("WARNING: could not set %s for %s: %s.\n",
-			       prop_type, node_type, fdt_strerror(err));
-	}
-
-	return node_offset;
-}
-
-void fdt_fixup_dr_usb(void *blob, bd_t *bd)
-{
-	const char *modes[] = { "host", "peripheral", "otg" };
-	const char *phys[] = { "ulpi", "utmi" };
-	int usb_mode_off = -1;
-	int usb_phy_off = -1;
-	char str[5];
-	int i, j;
-
-	for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
-		const char *dr_mode_type = NULL;
-		const char *dr_phy_type = NULL;
-		int mode_idx = -1, phy_idx = -1;
-		snprintf(str, 5, "%s%d", "usb", i);
-		if (hwconfig(str)) {
-			for (j = 0; j < ARRAY_SIZE(modes); j++) {
-				if (hwconfig_subarg_cmp(str, "dr_mode",
-						modes[j])) {
-					mode_idx = j;
-					break;
-				}
-			}
-
-			for (j = 0; j < ARRAY_SIZE(phys); j++) {
-				if (hwconfig_subarg_cmp(str, "phy_type",
-						phys[j])) {
-					phy_idx = j;
-					break;
-				}
-			}
-
-			if (mode_idx < 0 && phy_idx < 0) {
-				printf("WARNING: invalid phy or mode\n");
-				return;
-			}
-
-			if (mode_idx > -1)
-				dr_mode_type = modes[mode_idx];
-
-			if (phy_idx > -1)
-				dr_phy_type = phys[phy_idx];
-		}
-
-		usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
-			dr_mode_type, NULL, usb_mode_off);
-
-		if (usb_mode_off < 0)
-			return;
-
-		usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
-			NULL, dr_phy_type, usb_phy_off);
-
-		if (usb_phy_off < 0)
-			return;
-	}
-}
-#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
-
 /*
  * update crypto node properties to a specified revision of the SEC
  * called with sec_rev == 0 if not on an E processor