x86: quark: Add PCIe/USB static register programming after memory init

This adds static register programming for PCIe and USB after memory
init as required by Quark firmware writer guide. Although not doing
this did not cause any malfunction, just do it for safety.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

2 files changed, 86 insertions, 0 deletions

diff --git a/arch/x86/cpu/quark/quark.c b/arch/x86/cpu/quark/quark.c
index caa3875..934250b 100644
--- a/arch/x86/cpu/quark/quark.c
+++ b/arch/x86/cpu/quark/quark.c
@@ -223,6 +223,53 @@ void reset_cpu(ulong addr)
 	x86_full_reset();
 }
 
+static void quark_pcie_init(void)
+{
+	u32 val;
+
+	/* PCIe upstream non-posted & posted request size */
+	qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_CCFG,
+				   CCFG_UPRS | CCFG_UNRS);
+	qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_CCFG,
+				   CCFG_UPRS | CCFG_UNRS);
+
+	/* PCIe packet fast transmit mode (IPF) */
+	qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_MPC2, MPC2_IPF);
+	qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_MPC2, MPC2_IPF);
+
+	/* PCIe message bus idle counter (SBIC) */
+	qrk_pci_read_config_dword(QUARK_PCIE0, PCIE_RP_MBC, &val);
+	val |= MBC_SBIC;
+	qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_MBC, val);
+	qrk_pci_read_config_dword(QUARK_PCIE1, PCIE_RP_MBC, &val);
+	val |= MBC_SBIC;
+	qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_MBC, val);
+}
+
+static void quark_usb_init(void)
+{
+	u32 bar;
+
+	/* Change USB EHCI packet buffer OUT/IN threshold */
+	qrk_pci_read_config_dword(QUARK_USB_EHCI, PCI_BASE_ADDRESS_0, &bar);
+	writel((0x7f << 16) | 0x7f, bar + EHCI_INSNREG01);
+
+	/* Disable USB device interrupts */
+	qrk_pci_read_config_dword(QUARK_USB_DEVICE, PCI_BASE_ADDRESS_0, &bar);
+	writel(0x7f, bar + USBD_INT_MASK);
+	writel((0xf << 16) | 0xf, bar + USBD_EP_INT_MASK);
+	writel((0xf << 16) | 0xf, bar + USBD_EP_INT_STS);
+}
+
+int arch_early_init_r(void)
+{
+	quark_pcie_init();
+
+	quark_usb_init();
+
+	return 0;
+}
+
 int cpu_mmc_init(bd_t *bis)
 {
 	return pci_mmc_init("Quark SDHCI", mmc_supported,
@@ -256,3 +303,20 @@ int arch_misc_init(void)
 {
 	return pirq_init();
 }
+
+void board_final_cleanup(void)
+{
+	struct quark_rcba *rcba;
+	u32 base, val;
+
+	qrk_pci_read_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA, &base);
+	base &= ~MEM_BAR_EN;
+	rcba = (struct quark_rcba *)base;
+
+	/* Initialize 'Component ID' to zero */
+	val = readl(&rcba->esd);
+	val &= ~0xff0000;
+	writel(val, &rcba->esd);
+
+	return;
+}
diff --git a/arch/x86/include/asm/arch-quark/quark.h b/arch/x86/include/asm/arch-quark/quark.h
index 5d81976..eb3afbf 100644
--- a/arch/x86/include/asm/arch-quark/quark.h
+++ b/arch/x86/include/asm/arch-quark/quark.h
@@ -88,6 +88,20 @@
 /* 64KiB of RMU binary in flash */
 #define RMU_BINARY_SIZE		0x10000
 
+/* PCIe Root Port Configuration Registers */
+
+#define PCIE_RP_CCFG		0xd0
+#define CCFG_UPRS		(1 << 14)
+#define CCFG_UNRS		(1 << 15)
+#define CCFG_UNSD		(1 << 23)
+#define CCFG_UPSD		(1 << 24)
+
+#define PCIE_RP_MPC2		0xd4
+#define MPC2_IPF		(1 << 11)
+
+#define PCIE_RP_MBC		0xf4
+#define MBC_SBIC		(3 << 16)
+
 /* Legacy Bridge PCI Configuration Registers */
 #define LB_GBA			0x44
 #define LB_PM1BLK		0x48
@@ -100,6 +114,14 @@
 #define LB_BC			0xd8
 #define LB_RCBA			0xf0
 
+/* USB EHCI memory-mapped registers */
+#define EHCI_INSNREG01		0x94
+
+/* USB device memory-mapped registers */
+#define USBD_INT_MASK		0x410
+#define USBD_EP_INT_STS		0x414
+#define USBD_EP_INT_MASK	0x418
+
 #ifndef __ASSEMBLY__
 
 /* Root Complex Register Block */