summaryrefslogtreecommitdiff
path: root/arch/mips/cpu
diff options
context:
space:
mode:
authorDaniel Schwierzeck <daniel.schwierzeck@googlemail.com>2011-03-28 18:33:54 +0200
committerShinya Kuribayashi <skuribay@pobox.com>2011-04-02 22:07:12 +0900
commitb38a569901a617a1249ceac15a40a2306388b139 (patch)
tree010fef8d55d7dc323e39e596b4769b8017c776aa /arch/mips/cpu
parent67a490d60d70f2b01d55976440ba30154af96965 (diff)
downloadu-boot-imx-b38a569901a617a1249ceac15a40a2306388b139.zip
u-boot-imx-b38a569901a617a1249ceac15a40a2306388b139.tar.gz
u-boot-imx-b38a569901a617a1249ceac15a40a2306388b139.tar.bz2
MIPS: Purple: Remove Purple support
The Purple SoC and eval board are not actively maintained since years. This patch removes the support completely as aggreed with Wolfgang Denk. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
Diffstat (limited to 'arch/mips/cpu')
-rw-r--r--arch/mips/cpu/Makefile1
-rw-r--r--arch/mips/cpu/asc_serial.c83
-rw-r--r--arch/mips/cpu/cache.S4
-rw-r--r--arch/mips/cpu/start.S32
4 files changed, 0 insertions, 120 deletions
diff --git a/arch/mips/cpu/Makefile b/arch/mips/cpu/Makefile
index 06df8d1..816b76c 100644
--- a/arch/mips/cpu/Makefile
+++ b/arch/mips/cpu/Makefile
@@ -31,7 +31,6 @@ COBJS-y = cpu.o interrupts.o
SOBJS-$(CONFIG_INCA_IP) += incaip_wdt.o
COBJS-$(CONFIG_INCA_IP) += asc_serial.o incaip_clock.o
-COBJS-$(CONFIG_PURPLE) += asc_serial.o
COBJS-$(CONFIG_SOC_AU1X00) += au1x00_eth.o au1x00_serial.o au1x00_usb_ohci.o
SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
diff --git a/arch/mips/cpu/asc_serial.c b/arch/mips/cpu/asc_serial.c
index be686c2..7239804 100644
--- a/arch/mips/cpu/asc_serial.c
+++ b/arch/mips/cpu/asc_serial.c
@@ -3,47 +3,10 @@
*/
#include <config.h>
-
-#ifdef CONFIG_PURPLE
-#define serial_init asc_serial_init
-#define serial_putc asc_serial_putc
-#define serial_puts asc_serial_puts
-#define serial_getc asc_serial_getc
-#define serial_tstc asc_serial_tstc
-#define serial_setbrg asc_serial_setbrg
-#endif
-
#include <common.h>
#include <asm/inca-ip.h>
#include "asc_serial.h"
-#ifdef CONFIG_PURPLE
-
-#undef ASC_FIFO_PRESENT
-#define TOUT_LOOP 100000
-
-/* Set base address for second FPI interrupt control register bank */
-#define SFPI_INTCON_BASEADDR 0xBF0F0000
-
-/* Register offset from base address */
-#define FBS_ISR 0x00000000 /* Interrupt status register */
-#define FBS_IMR 0x00000008 /* Interrupt mask register */
-#define FBS_IDIS 0x00000010 /* Interrupt disable register */
-
-/* Interrupt status register bits */
-#define FBS_ISR_AT 0x00000040 /* ASC transmit interrupt */
-#define FBS_ISR_AR 0x00000020 /* ASC receive interrupt */
-#define FBS_ISR_AE 0x00000010 /* ASC error interrupt */
-#define FBS_ISR_AB 0x00000008 /* ASC transmit buffer interrupt */
-#define FBS_ISR_AS 0x00000004 /* ASC start of autobaud detection interrupt */
-#define FBS_ISR_AF 0x00000002 /* ASC end of autobaud detection interrupt */
-
-#else
-
-#define ASC_FIFO_PRESENT
-
-#endif
-
#define SET_BIT(reg, mask) reg |= (mask)
#define CLEAR_BIT(reg, mask) reg &= (~mask)
@@ -71,10 +34,8 @@ static volatile incaAsc_t *pAsc = (incaAsc_t *)INCA_IP_ASC;
int serial_init (void)
{
-#ifdef CONFIG_INCA_IP
/* we have to set PMU.EN13 bit to enable an ASC device*/
INCAASC_PMU_ENABLE(13);
-#endif
/* and we have to set CLC register*/
CLEAR_BIT(pAsc->asc_clc, ASCCLC_DISS);
@@ -86,7 +47,6 @@ int serial_init (void)
/* select input port */
pAsc->asc_pisel = (CONSOLE_TTY & 0x1);
-#ifdef ASC_FIFO_PRESENT
/* TXFIFO's filling level */
SET_BITFIELD(pAsc->asc_txfcon, ASCTXFCON_TXFITLMASK,
ASCTXFCON_TXFITLOFF, INCAASC_TXFIFO_FL);
@@ -98,25 +58,20 @@ int serial_init (void)
ASCRXFCON_RXFITLOFF, INCAASC_RXFIFO_FL);
/* enable RXFIFO */
SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXFEN);
-#endif
/* enable error signals */
SET_BIT(pAsc->asc_con, ASCCON_FEN);
SET_BIT(pAsc->asc_con, ASCCON_OEN);
-#ifdef CONFIG_INCA_IP
/* acknowledge ASC interrupts */
ASC_INTERRUPTS_CLEAR(INCAASC_IRQ_LINE_ALL);
/* disable ASC interrupts */
ASC_INTERRUPTS_DISABLE(INCAASC_IRQ_LINE_ALL);
-#endif
-#ifdef ASC_FIFO_PRESENT
/* set FIFOs into the transparent mode */
SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXTMEN);
SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXTMEN);
-#endif
/* set baud rate */
serial_setbrg();
@@ -132,11 +87,7 @@ void serial_setbrg (void)
ulong uiReloadValue, fdv;
ulong f_ASC;
-#ifdef CONFIG_INCA_IP
f_ASC = incaip_get_fpiclk();
-#else
- f_ASC = ASC_CLOCK_RATE;
-#endif
#ifndef INCAASC_USE_FDV
fdv = 2;
@@ -261,15 +212,10 @@ static int serial_setopt (void)
void serial_putc (const char c)
{
-#ifdef ASC_FIFO_PRESENT
uint txFl = 0;
-#else
- uint timeout = 0;
-#endif
if (c == '\n') serial_putc ('\r');
-#ifdef ASC_FIFO_PRESENT
/* check do we have a free space in the TX FIFO */
/* get current filling level */
do
@@ -277,25 +223,9 @@ void serial_putc (const char c)
txFl = ( pAsc->asc_fstat & ASCFSTAT_TXFFLMASK ) >> ASCFSTAT_TXFFLOFF;
}
while ( txFl == INCAASC_TXFIFO_FULL );
-#else
-
- while(!(*(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) &
- FBS_ISR_AB))
- {
- if (timeout++ > TOUT_LOOP)
- {
- break;
- }
- }
-#endif
pAsc->asc_tbuf = c; /* write char to Transmit Buffer Register */
-#ifndef ASC_FIFO_PRESENT
- *(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) = FBS_ISR_AB |
- FBS_ISR_AT;
-#endif
-
/* check for errors */
if ( pAsc->asc_con & ASCCON_OE )
{
@@ -324,10 +254,6 @@ int serial_getc (void)
c = (char)(pAsc->asc_rbuf & symbol_mask);
-#ifndef ASC_FIFO_PRESENT
- *(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) = FBS_ISR_AR;
-#endif
-
return c;
}
@@ -335,19 +261,10 @@ int serial_tstc (void)
{
int res = 1;
-#ifdef ASC_FIFO_PRESENT
if ( (pAsc->asc_fstat & ASCFSTAT_RXFFLMASK) == 0 )
{
res = 0;
}
-#else
- if (!(*(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) &
- FBS_ISR_AR))
-
- {
- res = 0;
- }
-#endif
else if ( pAsc->asc_con & ASCCON_FE )
{
SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRFE);
diff --git a/arch/mips/cpu/cache.S b/arch/mips/cpu/cache.S
index 4b30c89..2965938 100644
--- a/arch/mips/cpu/cache.S
+++ b/arch/mips/cpu/cache.S
@@ -311,11 +311,7 @@ LEAF(dcache_enable)
* RETURNS: N/A
*
*/
-#if defined(CONFIG_PURPLE)
-# define CACHE_LOCK_SIZE (CONFIG_SYS_DCACHE_SIZE/2)
-#else
# define CACHE_LOCK_SIZE (CONFIG_SYS_DCACHE_SIZE)
-#endif
.globl mips_cache_lock
.ent mips_cache_lock
mips_cache_lock:
diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S
index d6bcef6..e661d46 100644
--- a/arch/mips/cpu/start.S
+++ b/arch/mips/cpu/start.S
@@ -67,9 +67,6 @@ _start:
#if defined(CONFIG_INCA_IP)
.word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
.word 0x00000000 /* phase of the flash */
-#elif defined(CONFIG_PURPLE)
- .word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
- .word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
#else
RVECENT(romReserved,2)
#endif
@@ -203,30 +200,6 @@ _start:
* 128 * 8 == 1024 == 0x400
* so this is address R_VEC+0x400 == 0xbfc00400
*/
-#ifdef CONFIG_PURPLE
-/* 0xbfc00400 */
- .word 0xdc870000
- .word 0xfca70000
- .word 0x20840008
- .word 0x20a50008
- .word 0x20c6ffff
- .word 0x14c0fffa
- .word 0x00000000
- .word 0x03e00008
- .word 0x00000000
- .word 0x00000000
-/* 0xbfc00428 */
- .word 0xdc870000
- .word 0xfca70000
- .word 0x20840008
- .word 0x20a50008
- .word 0x20c6ffff
- .word 0x14c0fffa
- .word 0x00000000
- .word 0x03e00008
- .word 0x00000000
- .word 0x00000000
-#endif /* CONFIG_PURPLE */
.align 4
reset:
@@ -337,17 +310,12 @@ relocate_code:
move a0, t1 /* a0 <-- destination addr */
sub a1, t2, t0 /* a1 <-- size */
- /* On the purple board we copy the code earlier in a special way
- * in order to solve flash problems
- */
-#ifndef CONFIG_PURPLE
1:
lw t3, 0(t0)
sw t3, 0(t1)
addu t0, 4
ble t0, t2, 1b
addu t1, 4 /* delay slot */
-#endif
/* If caches were enabled, we would have to flush them here.
*/