m68k: code reformatting for all start.S files

This patch is style-related only, to reformat all the start.S code,
actually not following a coherent style inside single files and
between different cpu start.S files.

Linux format has been respected, as
  - max line width at 80 columns
  - one 8 cols tab between asm instructions and operands
  - inline comments, where any, fixed at col 41

Signed-off-by: Angelo Dureghello <angelo@sysam.it>

1 files changed, 85 insertions, 78 deletions

diff --git a/arch/m68k/cpu/mcf52x2/start.S b/arch/m68k/cpu/mcf52x2/start.S
index a048884..9837c41 100644
--- a/arch/m68k/cpu/mcf52x2/start.S
+++ b/arch/m68k/cpu/mcf52x2/start.S
@@ -34,12 +34,12 @@
 #if !defined(CONFIG_MONITOR_IS_IN_RAM)
 
 .text
+
 /*
- *	Vector table. This is used for initial platform startup.
- *	These vectors are to catch any un-intended traps.
+ * Vector table. This is used for initial platform startup.
+ * These vectors are to catch any un-intended traps.
  */
 _vectors:
-
 .long	0x00000000		/* Flash offset is 0 until we setup CS0 */
 #if defined(CONFIG_M5282) && (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
 .long	_start - CONFIG_SYS_TEXT_BASE
@@ -85,24 +85,24 @@ _vectors:
 
 #endif
 
-	.text
-
+.text
 
 #if defined(CONFIG_SYS_INT_FLASH_BASE) && \
     (defined(CONFIG_M5282) || defined(CONFIG_M5281))
-	#if (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
-		.long	0x55AA55AA,0xAA55AA55 /* CFM Backdoorkey */
-		.long	0xFFFFFFFF /* all sectors protected */
-		.long	0x00000000 /* supervisor/User restriction */
-		.long	0x00000000 /* programm/data space restriction */
-		.long	0x00000000 /* Flash security */
-	#endif
+#if (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+.long	0x55AA55AA,0xAA55AA55		/* CFM Backdoorkey */
+.long	0xFFFFFFFF			/* all sectors protected */
+.long	0x00000000			/* supervisor/User restriction */
+.long	0x00000000			/* programm/data space restriction */
+.long	0x00000000			/* Flash security */
 #endif
-	.globl	_start
+#endif
+
+.globl _start
 _start:
 	nop
 	nop
-	move.w #0x2700,%sr
+	move.w	#0x2700,%sr
 
 #if defined(CONFIG_M5208)
 	/* Initialize RAMBAR: locate SRAM and validate it */
@@ -111,22 +111,24 @@ _start:
 #endif
 
 #if defined(CONFIG_M5272) || defined(CONFIG_M5249) || defined(CONFIG_M5253)
-	move.l	#(CONFIG_SYS_MBAR + 1), %d0		/* set MBAR address + valid flag */
+	/* set MBAR address + valid flag */
+	move.l	#(CONFIG_SYS_MBAR + 1), %d0
 	move.c	%d0, %MBAR
 
 	/*** The 5249 has MBAR2 as well ***/
 #ifdef CONFIG_SYS_MBAR2
-	move.l	#(CONFIG_SYS_MBAR2 + 1), %d0	        /* Get MBAR2 address */
-	movec	%d0, #0xc0e		        /* Set MBAR2 */
+	/* Get MBAR2 address */
+	move.l	#(CONFIG_SYS_MBAR2 + 1), %d0
+	 /* Set MBAR2 */
+	movec	%d0, #0xc0e
 #endif
-
 	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + 1), %d0
 	movec	%d0, %RAMBAR0
 #endif /* CONFIG_M5272 || CONFIG_M5249 || CONFIG_M5253 */
 
 #if defined(CONFIG_M5282) || defined(CONFIG_M5271)
-	/* Initialize IPSBAR */
-	move.l	#(CONFIG_SYS_MBAR + 1), %d0		/* set IPSBAR address + valid flag */
+	/* set MBAR address + valid flag */
+	move.l	#(CONFIG_SYS_MBAR + 1), %d0
 	move.l	%d0, 0x40000000
 
 	/* Initialize RAMBAR1: locate SRAM and validate it */
@@ -135,22 +137,24 @@ _start:
 
 #if defined(CONFIG_M5282)
 #if (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
-	/* Setup code in SRAM to initialize FLASHBAR, if start from internal Flash */
-
-	move.l #(_flashbar_setup-CONFIG_SYS_INT_FLASH_BASE), %a0
-	move.l #(_flashbar_setup_end-CONFIG_SYS_INT_FLASH_BASE), %a1
-	move.l #(CONFIG_SYS_INIT_RAM_ADDR), %a2
+	/*
+	 * Setup code in SRAM to initialize FLASHBAR,
+	 * if start from internal Flash
+	 */
+	move.l	#(_flashbar_setup-CONFIG_SYS_INT_FLASH_BASE), %a0
+	move.l	#(_flashbar_setup_end-CONFIG_SYS_INT_FLASH_BASE), %a1
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR), %a2
 _copy_flash:
-	move.l (%a0)+, (%a2)+
-	cmp.l %a0, %a1
-	bgt.s _copy_flash
-	jmp CONFIG_SYS_INIT_RAM_ADDR
+	move.l	(%a0)+, (%a2)+
+	cmp.l	%a0, %a1
+	bgt.s	_copy_flash
+	jmp	CONFIG_SYS_INIT_RAM_ADDR
 
 _flashbar_setup:
 	/* Initialize FLASHBAR: locate internal Flash and validate it */
 	move.l	#(CONFIG_SYS_INT_FLASH_BASE + CONFIG_SYS_INT_FLASH_ENABLE), %d0
 	movec	%d0, %FLASHBAR
-	jmp _after_flashbar_copy.L	/* Force jump to absolute address */
+	jmp	_after_flashbar_copy.L	/* Force jump to absolute address */
 _flashbar_setup_end:
 	nop
 _after_flashbar_copy:
@@ -162,7 +166,8 @@ _after_flashbar_copy:
 
 #endif
 #endif
-	/* if we come from a pre-loader we have no exception table and
+	/*
+	 * if we come from a pre-loader we have no exception table and
 	 * therefore no VBR to set
 	 */
 #if !defined(CONFIG_MONITOR_IS_IN_RAM)
@@ -175,8 +180,8 @@ _after_flashbar_copy:
 #endif
 
 #ifdef CONFIG_M5275
-	/* Initialize IPSBAR */
-	move.l	#(CONFIG_SYS_MBAR + 1), %d0		/* set IPSBAR address + valid flag */
+	/* set MBAR address + valid flag */
+	move.l	#(CONFIG_SYS_MBAR + 1), %d0
 	move.l	%d0, 0x40000000
 /*	movec	%d0, %MBAR */
 
@@ -186,17 +191,17 @@ _after_flashbar_copy:
 #endif
 
 	/* initialize general use internal ram */
-	move.l #0, %d0
-	move.l #(ICACHE_STATUS), %a1	/* icache */
-	move.l #(DCACHE_STATUS), %a2	/* icache */
-	move.l %d0, (%a1)
-	move.l %d0, (%a2)
+	move.l	#0, %d0
+	move.l	#(ICACHE_STATUS), %a1	/* icache */
+	move.l	#(DCACHE_STATUS), %a2	/* icache */
+	move.l	%d0, (%a1)
+	move.l	%d0, (%a2)
 
 	/* put relocation table address to a5 */
-	move.l #__got_start, %a5
+	move.l	#__got_start, %a5
 
 	/* setup stack initially on top of internal static ram  */
-	move.l  #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp
 
 	/*
 	 * if configured, malloc_f arena will be reserved first,
@@ -204,28 +209,29 @@ _after_flashbar_copy:
 	 */
 	move.l	%sp, -(%sp)
 	move.l	#board_init_f_alloc_reserve, %a1
-	jsr (%a1)
+	jsr	(%a1)
 
 	/* update stack and frame-pointers */
-	move.l  %d0, %sp
-	move.l  %sp, %fp
+	move.l	%d0, %sp
+	move.l	%sp, %fp
 
 	/* initialize reserved area */
-	move.l  %d0, -(%sp)
+	move.l	%d0, -(%sp)
 	move.l	#board_init_f_init_reserve, %a1
-	jsr (%a1)
+	jsr	(%a1)
 
 	/* run low-level CPU init code (from flash) */
-	move.l #cpu_init_f, %a1
-	jsr (%a1)
+	move.l	#cpu_init_f, %a1
+	jsr	(%a1)
+
 	/* run low-level board init code (from flash) */
-	clr.l   %sp@-
-	move.l #board_init_f, %a1
-	jsr (%a1)
+	clr.l	%sp@-
+	move.l	#board_init_f, %a1
+	jsr	(%a1)
 
 	/* board_init_f() does not return */
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
 
 /*
  * void relocate_code (addr_sp, gd, addr_moni)
@@ -238,22 +244,22 @@ _after_flashbar_copy:
  * r5 = length in bytes
  * r6 = cachelinesize
  */
-	.globl	relocate_code
+.globl relocate_code
 relocate_code:
-	link.w %a6,#0
-	move.l 8(%a6), %sp		/* set new stack pointer */
+	link.w	%a6,#0
+	move.l	8(%a6), %sp		/* set new stack pointer */
 
-	move.l 12(%a6), %d0		/* Save copy of Global Data pointer */
-	move.l 16(%a6), %a0		/* Save copy of Destination Address */
+	move.l	12(%a6), %d0		/* Save copy of Global Data pointer */
+	move.l	16(%a6), %a0		/* Save copy of Destination Address */
 
-	move.l #CONFIG_SYS_MONITOR_BASE, %a1
-	move.l #__init_end, %a2
-	move.l %a0, %a3
+	move.l	#CONFIG_SYS_MONITOR_BASE, %a1
+	move.l	#__init_end, %a2
+	move.l	%a0, %a3
 	/* copy the code to RAM */
 1:
-	move.l (%a1)+, (%a3)+
-	cmp.l  %a1,%a2
-	bgt.s	 1b
+	move.l	(%a1)+, (%a3)+
+	cmp.l	%a1,%a2
+	bgt.s	1b
 
 /*
  * We are done. Do not return, instead branch to second part of board
@@ -283,7 +289,7 @@ clear_bss:
 	 */
 	move.l	%a0, %a1
 	add.l	#(__got_start - CONFIG_SYS_MONITOR_BASE),%a1
-	move.l	%a1,%a5		/* * fix got pointer register a5 */
+	move.l	%a1,%a5			/* fix got pointer register a5 */
 
 	move.l	%a0, %a2
 	add.l	#(__got_end - CONFIG_SYS_MONITOR_BASE),%a2
@@ -297,43 +303,44 @@ clear_bss:
 	bne	7b
 
 	/* calculate relative jump to board_init_r in ram */
-	move.l %a0, %a1
-	add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
+	move.l	%a0, %a1
+	add.l	#(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
 
 	/* set parameters for board_init_r */
-	move.l %a0,-(%sp)		/* dest_addr */
-	move.l %d0,-(%sp)		/* gd */
+	move.l	%a0,-(%sp)		/* dest_addr */
+	move.l	%d0,-(%sp)		/* gd */
 #if defined(DEBUG) && (CONFIG_SYS_TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE) && \
     defined(CONFIG_SYS_HALT_BEFOR_RAM_JUMP)
 	halt
 #endif
 	jsr	(%a1)
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
+
 /* exception code */
-	.globl _fault
+.globl _fault
 _fault:
-	bra _fault
+	bra	_fault
 
-	.globl	_exc_handler
+.globl _exc_handler
 _exc_handler:
 	SAVE_ALL
 	movel	%sp,%sp@-
-	bsr exc_handler
+	bsr	exc_handler
 	addql	#4,%sp
 	RESTORE_ALL
 
-	.globl	_int_handler
+.globl _int_handler
 _int_handler:
 	SAVE_ALL
 	movel	%sp,%sp@-
-	bsr int_handler
+	bsr	int_handler
 	addql	#4,%sp
 	RESTORE_ALL
 
-/*------------------------------------------------------------------------------*/
+/******************************************************************************/
 
-	.globl	version_string
+.globl version_string
 version_string:
-	.ascii U_BOOT_VERSION_STRING, "\0"
-	.align 4
+.ascii U_BOOT_VERSION_STRING, "\0"
+.align 4