ARM: zynq: move SoC sources to mach-zynq

Move arch/arm/cpu/armv7/zynq/* -> arch/arm/mach-zynq/*

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

11 files changed, 1496 insertions, 0 deletions

diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
new file mode 100644
index 0000000..26e570e
--- /dev/null
+++ b/arch/arm/mach-zynq/Kconfig
@@ -0,0 +1,43 @@
+if ZYNQ
+
+choice
+	prompt "Xilinx Zynq board select"
+
+config TARGET_ZYNQ_ZED
+	bool "Zynq ZedBoard"
+
+config TARGET_ZYNQ_MICROZED
+	bool "Zynq MicroZed"
+
+config TARGET_ZYNQ_PICOZED
+	bool "Zynq PicoZed"
+
+config TARGET_ZYNQ_ZC70X
+	bool "Zynq ZC702/ZC706 Board"
+
+config TARGET_ZYNQ_ZC770
+	bool "Zynq ZC770 Board"
+
+config TARGET_ZYNQ_ZYBO
+	bool "Zynq Zybo Board"
+
+endchoice
+
+config SYS_BOARD
+	default "zynq"
+
+config SYS_VENDOR
+	default "xilinx"
+
+config SYS_SOC
+	default "zynq"
+
+config SYS_CONFIG_NAME
+	default "zynq_zed" if TARGET_ZYNQ_ZED
+	default "zynq_microzed" if TARGET_ZYNQ_MICROZED
+	default "zynq_picozed" if TARGET_ZYNQ_PICOZED
+	default "zynq_zc70x" if TARGET_ZYNQ_ZC70X
+	default "zynq_zc770" if TARGET_ZYNQ_ZC770
+	default "zynq_zybo" if TARGET_ZYNQ_ZYBO
+
+endif
diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile
new file mode 100644
index 0000000..bf29b4d
--- /dev/null
+++ b/arch/arm/mach-zynq/Makefile
@@ -0,0 +1,18 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= timer.o
+obj-y	+= cpu.o
+obj-y	+= ddrc.o
+obj-y	+= slcr.o
+obj-y	+= clk.o
+obj-y	+= lowlevel_init.o
+AFLAGS_lowlevel_init.o := -mfpu=neon
+obj-$(CONFIG_SPL_BUILD)	+= spl.o
diff --git a/arch/arm/mach-zynq/clk.c b/arch/arm/mach-zynq/clk.c
new file mode 100644
index 0000000..d2885dc
--- /dev/null
+++ b/arch/arm/mach-zynq/clk.c
@@ -0,0 +1,664 @@
+/*
+ * Copyright (C) 2013 Soren Brinkmann <soren.brinkmann@xilinx.com>
+ * Copyright (C) 2013 Xilinx, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <errno.h>
+#include <clk.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clk.h>
+
+/* Board oscillator frequency */
+#ifndef CONFIG_ZYNQ_PS_CLK_FREQ
+# define CONFIG_ZYNQ_PS_CLK_FREQ	33333333UL
+#endif
+
+/* Register bitfield defines */
+#define PLLCTRL_FBDIV_MASK	0x7f000
+#define PLLCTRL_FBDIV_SHIFT	12
+#define PLLCTRL_BPFORCE_MASK	(1 << 4)
+#define PLLCTRL_PWRDWN_MASK	2
+#define PLLCTRL_PWRDWN_SHIFT	1
+#define PLLCTRL_RESET_MASK	1
+#define PLLCTRL_RESET_SHIFT	0
+
+#define ZYNQ_CLK_MAXDIV		0x3f
+#define CLK_CTRL_DIV1_SHIFT	20
+#define CLK_CTRL_DIV1_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV1_SHIFT)
+#define CLK_CTRL_DIV0_SHIFT	8
+#define CLK_CTRL_DIV0_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV0_SHIFT)
+#define CLK_CTRL_SRCSEL_SHIFT	4
+#define CLK_CTRL_SRCSEL_MASK	(0x3 << CLK_CTRL_SRCSEL_SHIFT)
+
+#define CLK_CTRL_DIV2X_SHIFT	26
+#define CLK_CTRL_DIV2X_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV2X_SHIFT)
+#define CLK_CTRL_DIV3X_SHIFT	20
+#define CLK_CTRL_DIV3X_MASK	(ZYNQ_CLK_MAXDIV << CLK_CTRL_DIV3X_SHIFT)
+
+#define ZYNQ_CLKMUX_SEL_0	0
+#define ZYNQ_CLKMUX_SEL_1	1
+#define ZYNQ_CLKMUX_SEL_2	2
+#define ZYNQ_CLKMUX_SEL_3	3
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct clk;
+
+/**
+ * struct clk_ops:
+ * @set_rate:	Function pointer to set_rate() implementation
+ * @get_rate:	Function pointer to get_rate() implementation
+ */
+struct clk_ops {
+	int (*set_rate)(struct clk *clk, unsigned long rate);
+	unsigned long (*get_rate)(struct clk *clk);
+};
+
+/**
+ * struct clk:
+ * @name:	Clock name
+ * @frequency:	Currenct frequency
+ * @parent:	Parent clock
+ * @flags:	Clock flags
+ * @reg:	Clock control register
+ * @ops:	Clock operations
+ */
+struct clk {
+	char		*name;
+	unsigned long	frequency;
+	enum zynq_clk	parent;
+	unsigned int	flags;
+	u32		*reg;
+	struct clk_ops	ops;
+};
+#define ZYNQ_CLK_FLAGS_HAS_2_DIVS	1
+
+static struct clk clks[clk_max];
+
+/**
+ * __zynq_clk_cpu_get_parent() - Decode clock multiplexer
+ * @srcsel:	Mux select value
+ * Returns the clock identifier associated with the selected mux input.
+ */
+static int __zynq_clk_cpu_get_parent(unsigned int srcsel)
+{
+	unsigned int ret;
+
+	switch (srcsel) {
+	case ZYNQ_CLKMUX_SEL_0:
+	case ZYNQ_CLKMUX_SEL_1:
+		ret = armpll_clk;
+		break;
+	case ZYNQ_CLKMUX_SEL_2:
+		ret = ddrpll_clk;
+		break;
+	case ZYNQ_CLKMUX_SEL_3:
+		ret = iopll_clk;
+		break;
+	default:
+		ret = armpll_clk;
+		break;
+	}
+
+	return ret;
+}
+
+/**
+ * ddr2x_get_rate() - Get clock rate of DDR2x clock
+ * @clk:	Clock handle
+ * Returns the current clock rate of @clk.
+ */
+static unsigned long ddr2x_get_rate(struct clk *clk)
+{
+	u32 clk_ctrl = readl(clk->reg);
+	u32 div = (clk_ctrl & CLK_CTRL_DIV2X_MASK) >> CLK_CTRL_DIV2X_SHIFT;
+
+	return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div);
+}
+
+/**
+ * ddr3x_get_rate() - Get clock rate of DDR3x clock
+ * @clk:	Clock handle
+ * Returns the current clock rate of @clk.
+ */
+static unsigned long ddr3x_get_rate(struct clk *clk)
+{
+	u32 clk_ctrl = readl(clk->reg);
+	u32 div = (clk_ctrl & CLK_CTRL_DIV3X_MASK) >> CLK_CTRL_DIV3X_SHIFT;
+
+	return DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div);
+}
+
+static void init_ddr_clocks(void)
+{
+	u32 div0, div1;
+	unsigned long prate = zynq_clk_get_rate(ddrpll_clk);
+	u32 clk_ctrl = readl(&slcr_base->ddr_clk_ctrl);
+
+	/* DDR2x */
+	clks[ddr2x_clk].reg = &slcr_base->ddr_clk_ctrl;
+	clks[ddr2x_clk].parent = ddrpll_clk;
+	clks[ddr2x_clk].name = "ddr_2x";
+	clks[ddr2x_clk].frequency = ddr2x_get_rate(&clks[ddr2x_clk]);
+	clks[ddr2x_clk].ops.get_rate = ddr2x_get_rate;
+
+	/* DDR3x */
+	clks[ddr3x_clk].reg = &slcr_base->ddr_clk_ctrl;
+	clks[ddr3x_clk].parent = ddrpll_clk;
+	clks[ddr3x_clk].name = "ddr_3x";
+	clks[ddr3x_clk].frequency = ddr3x_get_rate(&clks[ddr3x_clk]);
+	clks[ddr3x_clk].ops.get_rate = ddr3x_get_rate;
+
+	/* DCI */
+	clk_ctrl = readl(&slcr_base->dci_clk_ctrl);
+	div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+	div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT;
+	clks[dci_clk].reg = &slcr_base->dci_clk_ctrl;
+	clks[dci_clk].parent = ddrpll_clk;
+	clks[dci_clk].frequency = DIV_ROUND_CLOSEST(
+			DIV_ROUND_CLOSEST(prate, div0), div1);
+	clks[dci_clk].name = "dci";
+
+	gd->bd->bi_ddr_freq = clks[ddr3x_clk].frequency / 1000000;
+}
+
+static void init_cpu_clocks(void)
+{
+	int clk_621;
+	u32 reg, div, srcsel;
+	enum zynq_clk parent;
+
+	reg = readl(&slcr_base->arm_clk_ctrl);
+	clk_621 = readl(&slcr_base->clk_621_true) & 1;
+	div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+	srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+	parent = __zynq_clk_cpu_get_parent(srcsel);
+
+	/* cpu clocks */
+	clks[cpu_6or4x_clk].reg = &slcr_base->arm_clk_ctrl;
+	clks[cpu_6or4x_clk].parent = parent;
+	clks[cpu_6or4x_clk].frequency = DIV_ROUND_CLOSEST(
+			zynq_clk_get_rate(parent), div);
+	clks[cpu_6or4x_clk].name = "cpu_6or4x";
+
+	clks[cpu_3or2x_clk].reg = &slcr_base->arm_clk_ctrl;
+	clks[cpu_3or2x_clk].parent = cpu_6or4x_clk;
+	clks[cpu_3or2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) / 2;
+	clks[cpu_3or2x_clk].name = "cpu_3or2x";
+
+	clks[cpu_2x_clk].reg = &slcr_base->arm_clk_ctrl;
+	clks[cpu_2x_clk].parent = cpu_6or4x_clk;
+	clks[cpu_2x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) /
+			(2 + clk_621);
+	clks[cpu_2x_clk].name = "cpu_2x";
+
+	clks[cpu_1x_clk].reg = &slcr_base->arm_clk_ctrl;
+	clks[cpu_1x_clk].parent = cpu_6or4x_clk;
+	clks[cpu_1x_clk].frequency = zynq_clk_get_rate(cpu_6or4x_clk) /
+			(4 + 2 * clk_621);
+	clks[cpu_1x_clk].name = "cpu_1x";
+}
+
+/**
+ * periph_calc_two_divs() - Calculate clock dividers
+ * @cur_rate:	Current clock rate
+ * @tgt_rate:	Target clock rate
+ * @prate:	Parent clock rate
+ * @div0:	First divider (output)
+ * @div1:	Second divider (output)
+ * Returns the actual clock rate possible.
+ *
+ * Calculates clock dividers for clocks with two 6-bit dividers.
+ */
+static unsigned long periph_calc_two_divs(unsigned long cur_rate,
+		unsigned long tgt_rate, unsigned long prate, u32 *div0,
+		u32 *div1)
+{
+	long err, best_err = (long)(~0UL >> 1);
+	unsigned long rate, best_rate = 0;
+	u32 d0, d1;
+
+	for (d0 = 1; d0 <= ZYNQ_CLK_MAXDIV; d0++) {
+		for (d1 = 1; d1 <= ZYNQ_CLK_MAXDIV >> 1; d1++) {
+			rate = DIV_ROUND_CLOSEST(DIV_ROUND_CLOSEST(prate, d0),
+					d1);
+			err = abs(rate - tgt_rate);
+
+			if (err < best_err) {
+				*div0 = d0;
+				*div1 = d1;
+				best_err = err;
+				best_rate = rate;
+			}
+		}
+	}
+
+	return best_rate;
+}
+
+/**
+ * zynq_clk_periph_set_rate() - Set clock rate
+ * @clk:	Handle of the peripheral clock
+ * @rate:	New clock rate
+ * Sets the clock frequency of @clk to @rate. Returns zero on success.
+ */
+static int zynq_clk_periph_set_rate(struct clk *clk,
+		unsigned long rate)
+{
+	u32 ctrl, div0 = 0, div1 = 0;
+	unsigned long prate, new_rate, cur_rate = clk->frequency;
+
+	ctrl = readl(clk->reg);
+	prate = zynq_clk_get_rate(clk->parent);
+	ctrl &= ~CLK_CTRL_DIV0_MASK;
+
+	if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS) {
+		ctrl &= ~CLK_CTRL_DIV1_MASK;
+		new_rate = periph_calc_two_divs(cur_rate, rate, prate, &div0,
+				&div1);
+		ctrl |= div1 << CLK_CTRL_DIV1_SHIFT;
+	} else {
+		div0 = DIV_ROUND_CLOSEST(prate, rate);
+		div0 &= ZYNQ_CLK_MAXDIV;
+		new_rate = DIV_ROUND_CLOSEST(rate, div0);
+	}
+
+	/* write new divs to hardware */
+	ctrl |= div0 << CLK_CTRL_DIV0_SHIFT;
+	writel(ctrl, clk->reg);
+
+	/* update frequency in clk framework */
+	clk->frequency = new_rate;
+
+	return 0;
+}
+
+/**
+ * zynq_clk_periph_get_rate() - Get clock rate
+ * @clk:	Handle of the peripheral clock
+ * Returns the current clock rate of @clk.
+ */
+static unsigned long zynq_clk_periph_get_rate(struct clk *clk)
+{
+	u32 clk_ctrl = readl(clk->reg);
+	u32 div0 = (clk_ctrl & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+	u32 div1 = 1;
+
+	if (clk->flags & ZYNQ_CLK_FLAGS_HAS_2_DIVS)
+		div1 = (clk_ctrl & CLK_CTRL_DIV1_MASK) >> CLK_CTRL_DIV1_SHIFT;
+
+	/* a register value of zero == division by 1 */
+	if (!div0)
+		div0 = 1;
+	if (!div1)
+		div1 = 1;
+
+	return
+		DIV_ROUND_CLOSEST(
+			DIV_ROUND_CLOSEST(zynq_clk_get_rate(clk->parent), div0),
+			div1);
+}
+
+/**
+ * __zynq_clk_periph_get_parent() - Decode clock multiplexer
+ * @srcsel:	Mux select value
+ * Returns the clock identifier associated with the selected mux input.
+ */
+static enum zynq_clk __zynq_clk_periph_get_parent(u32 srcsel)
+{
+	switch (srcsel) {
+	case ZYNQ_CLKMUX_SEL_0:
+	case ZYNQ_CLKMUX_SEL_1:
+		return iopll_clk;
+	case ZYNQ_CLKMUX_SEL_2:
+		return armpll_clk;
+	case ZYNQ_CLKMUX_SEL_3:
+		return ddrpll_clk;
+	default:
+		return 0;
+	}
+}
+
+/**
+ * zynq_clk_periph_get_parent() - Decode clock multiplexer
+ * @clk:	Clock handle
+ * Returns the clock identifier associated with the selected mux input.
+ */
+static enum zynq_clk zynq_clk_periph_get_parent(struct clk *clk)
+{
+	u32 clk_ctrl = readl(clk->reg);
+	u32 srcsel = (clk_ctrl & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+
+	return __zynq_clk_periph_get_parent(srcsel);
+}
+
+/**
+ * zynq_clk_register_periph_clk() - Set up a peripheral clock with the framework
+ * @clk:	Pointer to struct clk for the clock
+ * @ctrl:	Clock control register
+ * @name:	PLL name
+ * @two_divs:	Indicates whether the clock features one or two dividers
+ */
+static int zynq_clk_register_periph_clk(struct clk *clk, u32 *ctrl, char *name,
+		bool two_divs)
+{
+	clk->name = name;
+	clk->reg = ctrl;
+	if (two_divs)
+		clk->flags = ZYNQ_CLK_FLAGS_HAS_2_DIVS;
+	clk->parent = zynq_clk_periph_get_parent(clk);
+	clk->frequency = zynq_clk_periph_get_rate(clk);
+	clk->ops.get_rate = zynq_clk_periph_get_rate;
+	clk->ops.set_rate = zynq_clk_periph_set_rate;
+
+	return 0;
+}
+
+static void init_periph_clocks(void)
+{
+	zynq_clk_register_periph_clk(&clks[gem0_clk], &slcr_base->gem0_clk_ctrl,
+				     "gem0", 1);
+	zynq_clk_register_periph_clk(&clks[gem1_clk], &slcr_base->gem1_clk_ctrl,
+				     "gem1", 1);
+
+	zynq_clk_register_periph_clk(&clks[smc_clk], &slcr_base->smc_clk_ctrl,
+				     "smc", 0);
+
+	zynq_clk_register_periph_clk(&clks[lqspi_clk],
+				     &slcr_base->lqspi_clk_ctrl, "lqspi", 0);
+
+	zynq_clk_register_periph_clk(&clks[sdio0_clk],
+				     &slcr_base->sdio_clk_ctrl, "sdio0", 0);
+	zynq_clk_register_periph_clk(&clks[sdio1_clk],
+				     &slcr_base->sdio_clk_ctrl, "sdio1", 0);
+
+	zynq_clk_register_periph_clk(&clks[spi0_clk], &slcr_base->spi_clk_ctrl,
+				     "spi0", 0);
+	zynq_clk_register_periph_clk(&clks[spi1_clk], &slcr_base->spi_clk_ctrl,
+				     "spi1", 0);
+
+	zynq_clk_register_periph_clk(&clks[uart0_clk],
+				     &slcr_base->uart_clk_ctrl, "uart0", 0);
+	zynq_clk_register_periph_clk(&clks[uart1_clk],
+				     &slcr_base->uart_clk_ctrl, "uart1", 0);
+
+	zynq_clk_register_periph_clk(&clks[dbg_trc_clk],
+				     &slcr_base->dbg_clk_ctrl, "dbg_trc", 0);
+	zynq_clk_register_periph_clk(&clks[dbg_apb_clk],
+				     &slcr_base->dbg_clk_ctrl, "dbg_apb", 0);
+
+	zynq_clk_register_periph_clk(&clks[pcap_clk],
+				     &slcr_base->pcap_clk_ctrl, "pcap", 0);
+
+	zynq_clk_register_periph_clk(&clks[fclk0_clk],
+				     &slcr_base->fpga0_clk_ctrl, "fclk0", 1);
+	zynq_clk_register_periph_clk(&clks[fclk1_clk],
+				     &slcr_base->fpga1_clk_ctrl, "fclk1", 1);
+	zynq_clk_register_periph_clk(&clks[fclk2_clk],
+				     &slcr_base->fpga2_clk_ctrl, "fclk2", 1);
+	zynq_clk_register_periph_clk(&clks[fclk3_clk],
+				     &slcr_base->fpga3_clk_ctrl, "fclk3", 1);
+}
+
+/**
+ * zynq_clk_register_aper_clk() - Set up a APER clock with the framework
+ * @clk:	Pointer to struct clk for the clock
+ * @ctrl:	Clock control register
+ * @name:	PLL name
+ */
+static void zynq_clk_register_aper_clk(struct clk *clk, u32 *ctrl, char *name)
+{
+	clk->name = name;
+	clk->reg = ctrl;
+	clk->parent = cpu_1x_clk;
+	clk->frequency = zynq_clk_get_rate(clk->parent);
+}
+
+static void init_aper_clocks(void)
+{
+	zynq_clk_register_aper_clk(&clks[usb0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "usb0_aper");
+	zynq_clk_register_aper_clk(&clks[usb1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "usb1_aper");
+
+	zynq_clk_register_aper_clk(&clks[gem0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "gem0_aper");
+	zynq_clk_register_aper_clk(&clks[gem1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "gem1_aper");
+
+	zynq_clk_register_aper_clk(&clks[sdio0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "sdio0_aper");
+	zynq_clk_register_aper_clk(&clks[sdio1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "sdio1_aper");
+
+	zynq_clk_register_aper_clk(&clks[spi0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "spi0_aper");
+	zynq_clk_register_aper_clk(&clks[spi1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "spi1_aper");
+
+	zynq_clk_register_aper_clk(&clks[can0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "can0_aper");
+	zynq_clk_register_aper_clk(&clks[can1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "can1_aper");
+
+	zynq_clk_register_aper_clk(&clks[i2c0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "i2c0_aper");
+	zynq_clk_register_aper_clk(&clks[i2c1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "i2c1_aper");
+
+	zynq_clk_register_aper_clk(&clks[uart0_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "uart0_aper");
+	zynq_clk_register_aper_clk(&clks[uart1_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "uart1_aper");
+
+	zynq_clk_register_aper_clk(&clks[gpio_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "gpio_aper");
+
+	zynq_clk_register_aper_clk(&clks[lqspi_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "lqspi_aper");
+
+	zynq_clk_register_aper_clk(&clks[smc_aper_clk],
+				   &slcr_base->aper_clk_ctrl, "smc_aper");
+}
+
+/**
+ * __zynq_clk_pll_get_rate() - Get PLL rate
+ * @addr:	Address of the PLL's control register
+ * Returns the current PLL output rate.
+ */
+static unsigned long __zynq_clk_pll_get_rate(u32 *addr)
+{
+	u32 reg, mul, bypass;
+
+	reg = readl(addr);
+	bypass = reg & PLLCTRL_BPFORCE_MASK;
+	if (bypass)
+		mul = 1;
+	else
+		mul = (reg & PLLCTRL_FBDIV_MASK) >> PLLCTRL_FBDIV_SHIFT;
+
+	return CONFIG_ZYNQ_PS_CLK_FREQ * mul;
+}
+
+/**
+ * zynq_clk_pll_get_rate() - Get PLL rate
+ * @pll:	Handle of the PLL
+ * Returns the current clock rate of @pll.
+ */
+static unsigned long zynq_clk_pll_get_rate(struct clk *pll)
+{
+	return __zynq_clk_pll_get_rate(pll->reg);
+}
+
+/**
+ * zynq_clk_register_pll() - Set up a PLL with the framework
+ * @clk:	Pointer to struct clk for the PLL
+ * @ctrl:	PLL control register
+ * @name:	PLL name
+ * @prate:	PLL input clock rate
+ */
+static void zynq_clk_register_pll(struct clk *clk, u32 *ctrl, char *name,
+		unsigned long prate)
+{
+	clk->name = name;
+	clk->reg = ctrl;
+	clk->frequency = zynq_clk_pll_get_rate(clk);
+	clk->ops.get_rate = zynq_clk_pll_get_rate;
+}
+
+/**
+ * clkid_2_register() - Get clock control register
+ * @id:	Clock identifier of one of the PLLs
+ * Returns the address of the requested PLL's control register.
+ */
+static u32 *clkid_2_register(enum zynq_clk id)
+{
+	switch (id) {
+	case armpll_clk:
+		return &slcr_base->arm_pll_ctrl;
+	case ddrpll_clk:
+		return &slcr_base->ddr_pll_ctrl;
+	case iopll_clk:
+		return &slcr_base->io_pll_ctrl;
+	default:
+		return &slcr_base->io_pll_ctrl;
+	}
+}
+
+/* API */
+/**
+ * zynq_clk_early_init() - Early init for the clock framework
+ *
+ * This function is called from before relocation and sets up the CPU clock
+ * frequency in the global data struct.
+ */
+void zynq_clk_early_init(void)
+{
+	u32 reg = readl(&slcr_base->arm_clk_ctrl);
+	u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+	u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+	enum zynq_clk parent = __zynq_clk_cpu_get_parent(srcsel);
+	u32 *pllreg = clkid_2_register(parent);
+	unsigned long prate = __zynq_clk_pll_get_rate(pllreg);
+
+	if (!div)
+		div = 1;
+
+	gd->cpu_clk = DIV_ROUND_CLOSEST(prate, div);
+}
+
+/**
+ * get_uart_clk() - Get UART input frequency
+ * @dev_index:	UART ID
+ * Returns UART input clock frequency in Hz.
+ *
+ * Compared to zynq_clk_get_rate() this function is designed to work before
+ * relocation and can be called when the serial UART is set up.
+ */
+unsigned long get_uart_clk(int dev_index)
+{
+	u32 reg = readl(&slcr_base->uart_clk_ctrl);
+	u32 div = (reg & CLK_CTRL_DIV0_MASK) >> CLK_CTRL_DIV0_SHIFT;
+	u32 srcsel = (reg & CLK_CTRL_SRCSEL_MASK) >> CLK_CTRL_SRCSEL_SHIFT;
+	enum zynq_clk parent = __zynq_clk_periph_get_parent(srcsel);
+	u32 *pllreg = clkid_2_register(parent);
+	unsigned long prate = __zynq_clk_pll_get_rate(pllreg);
+
+	if (!div)
+		div = 1;
+
+	return DIV_ROUND_CLOSEST(prate, div);
+}
+
+/**
+ * set_cpu_clk_info() - Initialize clock framework
+ * Always returns zero.
+ *
+ * This function is called from common code after relocation and sets up the
+ * clock framework. The framework must not be used before this function had been
+ * called.
+ */
+int set_cpu_clk_info(void)
+{
+	zynq_clk_register_pll(&clks[armpll_clk], &slcr_base->arm_pll_ctrl,
+			      "armpll", CONFIG_ZYNQ_PS_CLK_FREQ);
+	zynq_clk_register_pll(&clks[ddrpll_clk], &slcr_base->ddr_pll_ctrl,
+			      "ddrpll", CONFIG_ZYNQ_PS_CLK_FREQ);
+	zynq_clk_register_pll(&clks[iopll_clk], &slcr_base->io_pll_ctrl,
+			      "iopll", CONFIG_ZYNQ_PS_CLK_FREQ);
+
+	init_ddr_clocks();
+	init_cpu_clocks();
+	init_periph_clocks();
+	init_aper_clocks();
+
+	gd->bd->bi_arm_freq = gd->cpu_clk / 1000000;
+	gd->bd->bi_dsp_freq = 0;
+
+	return 0;
+}
+
+/**
+ * zynq_clk_get_rate() - Get clock rate
+ * @clk:	Clock identifier
+ * Returns the current clock rate of @clk on success or zero for an invalid
+ * clock id.
+ */
+unsigned long zynq_clk_get_rate(enum zynq_clk clk)
+{
+	if (clk < 0 || clk >= clk_max)
+		return 0;
+
+	return clks[clk].frequency;
+}
+
+/**
+ * zynq_clk_set_rate() - Set clock rate
+ * @clk:	Clock identifier
+ * @rate:	Requested clock rate
+ * Passes on the return value from the clock's set_rate() function or negative
+ * errno.
+ */
+int zynq_clk_set_rate(enum zynq_clk clk, unsigned long rate)
+{
+	if (clk < 0 || clk >= clk_max)
+		return -ENODEV;
+
+	if (clks[clk].ops.set_rate)
+		return clks[clk].ops.set_rate(&clks[clk], rate);
+
+	return -ENXIO;
+}
+
+/**
+ * zynq_clk_get_name() - Get clock name
+ * @clk:	Clock identifier
+ * Returns the name of @clk.
+ */
+const char *zynq_clk_get_name(enum zynq_clk clk)
+{
+	return clks[clk].name;
+}
+
+/**
+ * soc_clk_dump() - Print clock frequencies
+ * Returns zero on success
+ *
+ * Implementation for the clk dump command.
+ */
+int soc_clk_dump(void)
+{
+	int i;
+
+	printf("clk\t\tfrequency\n");
+	for (i = 0; i < clk_max; i++) {
+		const char *name = zynq_clk_get_name(i);
+		if (name)
+			printf("%10s%20lu\n", name, zynq_clk_get_rate(i));
+	}
+
+	return 0;
+}
diff --git a/arch/arm/mach-zynq/cpu.c b/arch/arm/mach-zynq/cpu.c
new file mode 100644
index 0000000..914b1fe
--- /dev/null
+++ b/arch/arm/mach-zynq/cpu.c
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2012 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2012 Xilinx, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+
+#define ZYNQ_SILICON_VER_MASK	0xF0000000
+#define ZYNQ_SILICON_VER_SHIFT	28
+
+int arch_cpu_init(void)
+{
+	zynq_slcr_unlock();
+#ifndef CONFIG_SPL_BUILD
+	/* Device config APB, unlock the PCAP */
+	writel(0x757BDF0D, &devcfg_base->unlock);
+	writel(0xFFFFFFFF, &devcfg_base->rom_shadow);
+
+#if (CONFIG_SYS_SDRAM_BASE == 0)
+	/* remap DDR to zero, FILTERSTART */
+	writel(0, &scu_base->filter_start);
+
+	/* OCM_CFG, Mask out the ROM, map ram into upper addresses */
+	writel(0x1F, &slcr_base->ocm_cfg);
+	/* FPGA_RST_CTRL, clear resets on AXI fabric ports */
+	writel(0x0, &slcr_base->fpga_rst_ctrl);
+	/* Set urgent bits with register */
+	writel(0x0, &slcr_base->ddr_urgent_sel);
+	/* Urgent write, ports S2/S3 */
+	writel(0xC, &slcr_base->ddr_urgent);
+#endif
+#endif
+	zynq_clk_early_init();
+	zynq_slcr_lock();
+
+	return 0;
+}
+
+unsigned int zynq_get_silicon_version(void)
+{
+	unsigned int ver;
+
+	ver = (readl(&devcfg_base->mctrl) &
+	       ZYNQ_SILICON_VER_MASK) >> ZYNQ_SILICON_VER_SHIFT;
+
+	return ver;
+}
+
+void reset_cpu(ulong addr)
+{
+	zynq_slcr_cpu_reset();
+	while (1)
+		;
+}
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+	/* Enable D-cache. I-cache is already enabled in start.S */
+	dcache_enable();
+}
+#endif
diff --git a/arch/arm/mach-zynq/ddrc.c b/arch/arm/mach-zynq/ddrc.c
new file mode 100644
index 0000000..5b20acc
--- /dev/null
+++ b/arch/arm/mach-zynq/ddrc.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2012 - 2013 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2012 - 2013 Xilinx, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Control regsiter bitfield definitions */
+#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_MASK		0xC
+#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_SHIFT	2
+#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT	1
+
+/* ECC scrub regsiter definitions */
+#define ZYNQ_DDRC_ECC_SCRUBREG_ECC_MODE_MASK	0x7
+#define ZYNQ_DDRC_ECC_SCRUBREG_ECCMODE_SECDED	0x4
+
+void zynq_ddrc_init(void)
+{
+	u32 width, ecctype;
+
+	width = readl(&ddrc_base->ddrc_ctrl);
+	width = (width & ZYNQ_DDRC_CTRLREG_BUSWIDTH_MASK) >>
+					ZYNQ_DDRC_CTRLREG_BUSWIDTH_SHIFT;
+	ecctype = (readl(&ddrc_base->ecc_scrub) &
+		ZYNQ_DDRC_ECC_SCRUBREG_ECC_MODE_MASK);
+
+	/* ECC is enabled when memory is in 16bit mode and it is enabled */
+	if ((ecctype == ZYNQ_DDRC_ECC_SCRUBREG_ECCMODE_SECDED) &&
+	    (width == ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT)) {
+		puts("ECC enabled ");
+		/*
+		 * Clear the first 1MB because it is not initialized from
+		 * first stage bootloader. To get ECC to work all memory has
+		 * been initialized by writing any value.
+		 */
+		/* cppcheck-suppress nullPointer */
+		memset((void *)0, 0, 1 * 1024 * 1024);
+
+		gd->ram_size /= 2;
+	} else {
+		puts("ECC disabled ");
+	}
+}
diff --git a/arch/arm/mach-zynq/lowlevel_init.S b/arch/arm/mach-zynq/lowlevel_init.S
new file mode 100644
index 0000000..6d714b7
--- /dev/null
+++ b/arch/arm/mach-zynq/lowlevel_init.S
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2013 Xilinx, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+
+	/* Enable the the VFP */
+	mrc	p15, 0, r1, c1, c0, 2
+	orr	r1, r1, #(0x3 << 20)
+	orr	r1, r1, #(0x3 << 20)
+	mcr	p15, 0, r1, c1, c0, 2
+	isb
+	fmrx	r1, FPEXC
+	orr	r1,r1, #(1<<30)
+	fmxr	FPEXC, r1
+
+	/* Move back to caller */
+	mov	pc, lr
+
+ENDPROC(lowlevel_init)
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
new file mode 100644
index 0000000..05f4099
--- /dev/null
+++ b/arch/arm/mach-zynq/slcr.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright (c) 2013 Xilinx Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <malloc.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/clk.h>
+
+#define SLCR_LOCK_MAGIC		0x767B
+#define SLCR_UNLOCK_MAGIC	0xDF0D
+
+#define SLCR_USB_L1_SEL			0x04
+
+#define SLCR_IDCODE_MASK	0x1F000
+#define SLCR_IDCODE_SHIFT	12
+
+/*
+ * zynq_slcr_mio_get_status - Get the status of MIO peripheral.
+ *
+ * @peri_name: Name of the peripheral for checking MIO status
+ * @get_pins: Pointer to array of get pin for this peripheral
+ * @num_pins: Number of pins for this peripheral
+ * @mask: Mask value
+ * @check_val: Required check value to get the status of  periph
+ */
+struct zynq_slcr_mio_get_status {
+	const char *peri_name;
+	const int *get_pins;
+	int num_pins;
+	u32 mask;
+	u32 check_val;
+};
+
+static const int usb0_pins[] = {
+	28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39
+};
+
+static const int usb1_pins[] = {
+	40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51
+};
+
+static const struct zynq_slcr_mio_get_status mio_periphs[] = {
+	{
+		"usb0",
+		usb0_pins,
+		ARRAY_SIZE(usb0_pins),
+		SLCR_USB_L1_SEL,
+		SLCR_USB_L1_SEL,
+	},
+	{
+		"usb1",
+		usb1_pins,
+		ARRAY_SIZE(usb1_pins),
+		SLCR_USB_L1_SEL,
+		SLCR_USB_L1_SEL,
+	},
+};
+
+static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */
+
+void zynq_slcr_lock(void)
+{
+	if (!slcr_lock) {
+		writel(SLCR_LOCK_MAGIC, &slcr_base->slcr_lock);
+		slcr_lock = 1;
+	}
+}
+
+void zynq_slcr_unlock(void)
+{
+	if (slcr_lock) {
+		writel(SLCR_UNLOCK_MAGIC, &slcr_base->slcr_unlock);
+		slcr_lock = 0;
+	}
+}
+
+/* Reset the entire system */
+void zynq_slcr_cpu_reset(void)
+{
+	/*
+	 * Unlock the SLCR then reset the system.
+	 * Note that this seems to require raw i/o
+	 * functions or there's a lockup?
+	 */
+	zynq_slcr_unlock();
+
+	/*
+	 * Clear 0x0F000000 bits of reboot status register to workaround
+	 * the FSBL not loading the bitstream after soft-reboot
+	 * This is a temporary solution until we know more.
+	 */
+	clrbits_le32(&slcr_base->reboot_status, 0xF000000);
+
+	writel(1, &slcr_base->pss_rst_ctrl);
+}
+
+/* Setup clk for network */
+void zynq_slcr_gem_clk_setup(u32 gem_id, unsigned long clk_rate)
+{
+	int ret;
+
+	zynq_slcr_unlock();
+
+	if (gem_id > 1) {
+		printf("Non existing GEM id %d\n", gem_id);
+		goto out;
+	}
+
+	ret = zynq_clk_set_rate(gem0_clk + gem_id, clk_rate);
+	if (ret)
+		goto out;
+
+	if (gem_id) {
+		/* Configure GEM_RCLK_CTRL */
+		writel(1, &slcr_base->gem1_rclk_ctrl);
+	} else {
+		/* Configure GEM_RCLK_CTRL */
+		writel(1, &slcr_base->gem0_rclk_ctrl);
+	}
+	udelay(100000);
+out:
+	zynq_slcr_lock();
+}
+
+void zynq_slcr_devcfg_disable(void)
+{
+	u32 reg_val;
+
+	zynq_slcr_unlock();
+
+	/* Disable AXI interface by asserting FPGA resets */
+	writel(0xF, &slcr_base->fpga_rst_ctrl);
+
+	/* Disable Level shifters before setting PS-PL */
+	reg_val = readl(&slcr_base->lvl_shftr_en);
+	reg_val &= ~0xF;
+	writel(reg_val, &slcr_base->lvl_shftr_en);
+
+	/* Set Level Shifters DT618760 */
+	writel(0xA, &slcr_base->lvl_shftr_en);
+
+	zynq_slcr_lock();
+}
+
+void zynq_slcr_devcfg_enable(void)
+{
+	zynq_slcr_unlock();
+
+	/* Set Level Shifters DT618760 */
+	writel(0xF, &slcr_base->lvl_shftr_en);
+
+	/* Enable AXI interface by de-asserting FPGA resets */
+	writel(0x0, &slcr_base->fpga_rst_ctrl);
+
+	zynq_slcr_lock();
+}
+
+u32 zynq_slcr_get_boot_mode(void)
+{
+	/* Get the bootmode register value */
+	return readl(&slcr_base->boot_mode);
+}
+
+u32 zynq_slcr_get_idcode(void)
+{
+	return (readl(&slcr_base->pss_idcode) & SLCR_IDCODE_MASK) >>
+							SLCR_IDCODE_SHIFT;
+}
+
+/*
+ * zynq_slcr_get_mio_pin_status - Get the MIO pin status of peripheral.
+ *
+ * @periph: Name of the peripheral
+ *
+ * Returns count to indicate the number of pins configured for the
+ * given @periph.
+ */
+int zynq_slcr_get_mio_pin_status(const char *periph)
+{
+	const struct zynq_slcr_mio_get_status *mio_ptr;
+	int val, i, j;
+	int mio = 0;
+
+	for (i = 0; i < ARRAY_SIZE(mio_periphs); i++) {
+		if (strcmp(periph, mio_periphs[i].peri_name) == 0) {
+			mio_ptr = &mio_periphs[i];
+			for (j = 0; j < mio_ptr->num_pins; j++) {
+				val = readl(&slcr_base->mio_pin
+						[mio_ptr->get_pins[j]]);
+				if ((val & mio_ptr->mask) == mio_ptr->check_val)
+					mio++;
+			}
+			break;
+		}
+	}
+
+	return mio;
+}
diff --git a/arch/arm/mach-zynq/spl.c b/arch/arm/mach-zynq/spl.c
new file mode 100644
index 0000000..13025f0
--- /dev/null
+++ b/arch/arm/mach-zynq/spl.c
@@ -0,0 +1,90 @@
+/*
+ * (C) Copyright 2014 Xilinx, Inc. Michal Simek
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <spl.h>
+
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/spl.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_init_f(ulong dummy)
+{
+	ps7_init();
+
+	/* Clear the BSS. */
+	memset(__bss_start, 0, __bss_end - __bss_start);
+
+	preloader_console_init();
+	arch_cpu_init();
+	board_init_r(NULL, 0);
+}
+
+#ifdef CONFIG_SPL_BOARD_INIT
+void spl_board_init(void)
+{
+	board_init();
+}
+#endif
+
+u32 spl_boot_device(void)
+{
+	u32 mode;
+
+	switch ((zynq_slcr_get_boot_mode()) & ZYNQ_BM_MASK) {
+#ifdef CONFIG_SPL_SPI_SUPPORT
+	case ZYNQ_BM_QSPI:
+		puts("qspi boot\n");
+		mode = BOOT_DEVICE_SPI;
+		break;
+#endif
+	case ZYNQ_BM_NAND:
+		mode = BOOT_DEVICE_NAND;
+		break;
+	case ZYNQ_BM_NOR:
+		mode = BOOT_DEVICE_NOR;
+		break;
+#ifdef CONFIG_SPL_MMC_SUPPORT
+	case ZYNQ_BM_SD:
+		puts("mmc boot\n");
+		mode = BOOT_DEVICE_MMC1;
+		break;
+#endif
+	case ZYNQ_BM_JTAG:
+		mode = BOOT_DEVICE_RAM;
+		break;
+	default:
+		puts("Unsupported boot mode selected\n");
+		hang();
+	}
+
+	return mode;
+}
+
+#ifdef CONFIG_SPL_MMC_SUPPORT
+u32 spl_boot_mode(void)
+{
+	return MMCSD_MODE_FS;
+}
+#endif
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+	/* boot linux */
+	return 0;
+}
+#endif
+
+__weak void ps7_init(void)
+{
+	/*
+	 * This function is overridden by the one in
+	 * board/xilinx/zynq/ps7_init_gpl.c, if it exists.
+	 */
+}
diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c
new file mode 100644
index 0000000..5ed9642
--- /dev/null
+++ b/arch/arm/mach-zynq/timer.c
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2012 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2011-2012 Xilinx, Inc. All rights reserved.
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * (C) Copyright 2004
+ * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
+ *
+ * (C) Copyright 2002-2004
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2003
+ * Texas Instruments <www.ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clk.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct scu_timer {
+	u32 load; /* Timer Load Register */
+	u32 counter; /* Timer Counter Register */
+	u32 control; /* Timer Control Register */
+};
+
+static struct scu_timer *timer_base =
+			      (struct scu_timer *)ZYNQ_SCUTIMER_BASEADDR;
+
+#define SCUTIMER_CONTROL_PRESCALER_MASK	0x0000FF00 /* Prescaler */
+#define SCUTIMER_CONTROL_PRESCALER_SHIFT	8
+#define SCUTIMER_CONTROL_AUTO_RELOAD_MASK	0x00000002 /* Auto-reload */
+#define SCUTIMER_CONTROL_ENABLE_MASK		0x00000001 /* Timer enable */
+
+#define TIMER_LOAD_VAL 0xFFFFFFFF
+#define TIMER_PRESCALE 255
+
+int timer_init(void)
+{
+	const u32 emask = SCUTIMER_CONTROL_AUTO_RELOAD_MASK |
+			(TIMER_PRESCALE << SCUTIMER_CONTROL_PRESCALER_SHIFT) |
+			SCUTIMER_CONTROL_ENABLE_MASK;
+
+	gd->arch.timer_rate_hz = (gd->cpu_clk / 2) / (TIMER_PRESCALE + 1);
+
+	/* Load the timer counter register */
+	writel(0xFFFFFFFF, &timer_base->load);
+
+	/*
+	 * Start the A9Timer device
+	 * Enable Auto reload mode, Clear prescaler control bits
+	 * Set prescaler value, Enable the decrementer
+	 */
+	clrsetbits_le32(&timer_base->control, SCUTIMER_CONTROL_PRESCALER_MASK,
+								emask);
+
+	/* Reset time */
+	gd->arch.lastinc = readl(&timer_base->counter) /
+				(gd->arch.timer_rate_hz / CONFIG_SYS_HZ);
+	gd->arch.tbl = 0;
+
+	return 0;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+ulong get_timer_masked(void)
+{
+	ulong now;
+
+	now = readl(&timer_base->counter) /
+			(gd->arch.timer_rate_hz / CONFIG_SYS_HZ);
+
+	if (gd->arch.lastinc >= now) {
+		/* Normal mode */
+		gd->arch.tbl += gd->arch.lastinc - now;
+	} else {
+		/* We have an overflow ... */
+		gd->arch.tbl += gd->arch.lastinc + (TIMER_LOAD_VAL /
+				(gd->arch.timer_rate_hz / CONFIG_SYS_HZ)) -
+				now + 1;
+	}
+	gd->arch.lastinc = now;
+
+	return gd->arch.tbl;
+}
+
+void __udelay(unsigned long usec)
+{
+	u32 countticks;
+	u32 timeend;
+	u32 timediff;
+	u32 timenow;
+
+	if (usec == 0)
+		return;
+
+	countticks = lldiv(((unsigned long long)gd->arch.timer_rate_hz * usec),
+			   1000000);
+
+	/* decrementing timer */
+	timeend = readl(&timer_base->counter) - countticks;
+
+#if TIMER_LOAD_VAL != 0xFFFFFFFF
+	/* do not manage multiple overflow */
+	if (countticks >= TIMER_LOAD_VAL)
+		countticks = TIMER_LOAD_VAL - 1;
+#endif
+
+	do {
+		timenow = readl(&timer_base->counter);
+
+		if (timenow >= timeend) {
+			/* normal case */
+			timediff = timenow - timeend;
+		} else {
+			if ((TIMER_LOAD_VAL - timeend + timenow) <=
+								countticks) {
+				/* overflow */
+				timediff = TIMER_LOAD_VAL - timeend + timenow;
+			} else {
+				/* missed the exact match */
+				break;
+			}
+		}
+	} while (timediff > 0);
+}
+
+/* Timer without interrupts */
+ulong get_timer(ulong base)
+{
+	return get_timer_masked() - base;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return CONFIG_SYS_HZ;
+}
diff --git a/arch/arm/mach-zynq/u-boot-spl.lds b/arch/arm/mach-zynq/u-boot-spl.lds
new file mode 100644
index 0000000..0f2f756
--- /dev/null
+++ b/arch/arm/mach-zynq/u-boot-spl.lds
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2014 Xilinx, Inc. Michal Simek
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
+		LENGTH = CONFIG_SPL_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \
+		LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = ALIGN(4);
+	.text :
+	{
+		__image_copy_start = .;
+		*(.vectors)
+		CPUDIR/start.o (.text*)
+		*(.text*)
+	} > .sram
+
+	. = ALIGN(4);
+	.rodata : {
+		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+	} > .sram
+
+	. = ALIGN(4);
+	.data : {
+		*(.data*)
+	} > .sram
+
+	. = ALIGN(4);
+
+	. = .;
+
+	__image_copy_end = .;
+
+	_end = .;
+
+	/* Move BSS section to RAM because of FAT */
+	.bss (NOLOAD) : {
+		__bss_start = .;
+		*(.bss*)
+		 . = ALIGN(4);
+		__bss_end = .;
+	} > .sdram
+
+	/DISCARD/ : { *(.dynsym) }
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
+}
diff --git a/arch/arm/mach-zynq/u-boot.lds b/arch/arm/mach-zynq/u-boot.lds
new file mode 100644
index 0000000..4dc9bb0
--- /dev/null
+++ b/arch/arm/mach-zynq/u-boot.lds
@@ -0,0 +1,105 @@
+/*
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text :
+	{
+		*(.__image_copy_start)
+		*(.vectors)
+		CPUDIR/start.o (.text*)
+		*(.text*)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+	. = ALIGN(4);
+	.data : {
+		*(.data*)
+	}
+
+	. = ALIGN(4);
+
+	. = .;
+
+	. = ALIGN(4);
+	.u_boot_list : {
+		KEEP(*(SORT(.u_boot_list*)));
+	}
+
+	. = ALIGN(4);
+
+	.image_copy_end :
+	{
+		*(.__image_copy_end)
+	}
+
+	.rel_dyn_start :
+	{
+		*(.__rel_dyn_start)
+	}
+
+	.rel.dyn : {
+		*(.rel*)
+	}
+
+	.rel_dyn_end :
+	{
+		*(.__rel_dyn_end)
+	}
+
+	.end :
+	{
+		*(.__end)
+	}
+
+	_image_binary_end = .;
+
+/*
+ * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
+ * __bss_base and __bss_limit are for linker only (overlay ordering)
+ */
+
+	.bss_start __rel_dyn_start (OVERLAY) : {
+		KEEP(*(.__bss_start));
+		__bss_base = .;
+	}
+
+	.bss __bss_base (OVERLAY) : {
+		*(.bss*)
+		 . = ALIGN(4);
+		 __bss_limit = .;
+	}
+
+	.bss_end __bss_limit (OVERLAY) : {
+		KEEP(*(.__bss_end));
+	}
+
+	/*
+	 * Zynq needs to discard these sections because the user
+	 * is expected to pass this image on to tools for boot.bin
+	 * generation that require them to be dropped.
+	 */
+	/DISCARD/ : { *(.dynsym) }
+	/DISCARD/ : { *(.dynbss*) }
+	/DISCARD/ : { *(.dynstr*) }
+	/DISCARD/ : { *(.dynamic*) }
+	/DISCARD/ : { *(.plt*) }
+	/DISCARD/ : { *(.interp*) }
+	/DISCARD/ : { *(.gnu*) }
+	/DISCARD/ : { *(.ARM.exidx*) }
+	/DISCARD/ : { *(.gnu.linkonce.armexidx.*) }
+}