ARMv7M: Add STM32F4 support

Signed-off-by: Kamil Lulko <rev13@wp.pl>
Reviewed-by: Tom Rini <trini@konsulko.com>

3 files changed, 299 insertions, 0 deletions

diff --git a/arch/arm/include/asm/arch-stm32f4/fmc.h b/arch/arm/include/asm/arch-stm32f4/fmc.h
new file mode 100644
index 0000000..4ab3031
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f4/fmc.h
@@ -0,0 +1,75 @@
+/*
+ * (C) Copyright 2013
+ * Pavel Boldin, Emcraft Systems, paboldin@emcraft.com
+ *
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _MACH_FMC_H_
+#define _MACH_FMC_H_
+
+struct stm32_fmc_regs {
+	u32 sdcr1;	/* Control register 1 */
+	u32 sdcr2;	/* Control register 2 */
+	u32 sdtr1;	/* Timing register 1 */
+	u32 sdtr2;	/* Timing register 2 */
+	u32 sdcmr;	/* Mode register */
+	u32 sdrtr;	/* Refresh timing register */
+	u32 sdsr;	/* Status register */
+};
+
+/*
+ * FMC registers base
+ */
+#define STM32_SDRAM_FMC_BASE	0xA0000140
+#define STM32_SDRAM_FMC		((struct stm32_fmc_regs *)STM32_SDRAM_FMC_BASE)
+
+/* Control register SDCR */
+#define FMC_SDCR_RPIPE_SHIFT	13	/* RPIPE bit shift */
+#define FMC_SDCR_RBURST_SHIFT	12	/* RBURST bit shift */
+#define FMC_SDCR_SDCLK_SHIFT	10	/* SDRAM clock divisor shift */
+#define FMC_SDCR_WP_SHIFT	9	/* Write protection shift */
+#define FMC_SDCR_CAS_SHIFT	7	/* CAS latency shift */
+#define FMC_SDCR_NB_SHIFT	6	/* Number of banks shift */
+#define FMC_SDCR_MWID_SHIFT	4	/* Memory width shift */
+#define FMC_SDCR_NR_SHIFT	2	/* Number of row address bits shift */
+#define FMC_SDCR_NC_SHIFT	0	/* Number of col address bits shift */
+
+/* Timings register SDTR */
+#define FMC_SDTR_TMRD_SHIFT	0	/* Load mode register to active */
+#define FMC_SDTR_TXSR_SHIFT	4	/* Exit self-refresh time */
+#define FMC_SDTR_TRAS_SHIFT	8	/* Self-refresh time */
+#define FMC_SDTR_TRC_SHIFT	12	/* Row cycle delay */
+#define FMC_SDTR_TWR_SHIFT	16	/* Recovery delay */
+#define FMC_SDTR_TRP_SHIFT	20	/* Row precharge delay */
+#define FMC_SDTR_TRCD_SHIFT	24	/* Row-to-column delay */
+
+
+#define FMC_SDCMR_NRFS_SHIFT	5
+
+#define FMC_SDCMR_MODE_NORMAL		0
+#define FMC_SDCMR_MODE_START_CLOCK	1
+#define FMC_SDCMR_MODE_PRECHARGE	2
+#define FMC_SDCMR_MODE_AUTOREFRESH	3
+#define FMC_SDCMR_MODE_WRITE_MODE	4
+#define FMC_SDCMR_MODE_SELFREFRESH	5
+#define FMC_SDCMR_MODE_POWERDOWN	6
+
+#define FMC_SDCMR_BANK_1		(1 << 4)
+#define FMC_SDCMR_BANK_2		(1 << 3)
+
+#define FMC_SDCMR_MODE_REGISTER_SHIFT	9
+
+#define FMC_SDSR_BUSY			(1 << 5)
+
+#define FMC_BUSY_WAIT()		do { \
+		__asm__ __volatile__ ("dsb" : : : "memory"); \
+		while (STM32_SDRAM_FMC->sdsr & FMC_SDSR_BUSY) \
+			; \
+	} while (0)
+
+
+#endif /* _MACH_FMC_H_ */
diff --git a/arch/arm/include/asm/arch-stm32f4/gpio.h b/arch/arm/include/asm/arch-stm32f4/gpio.h
new file mode 100644
index 0000000..7cd866e
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f4/gpio.h
@@ -0,0 +1,116 @@
+/*
+ * (C) Copyright 2011
+ * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com
+ *
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _STM32_GPIO_H_
+#define _STM32_GPIO_H_
+
+enum stm32_gpio_port {
+	STM32_GPIO_PORT_A = 0,
+	STM32_GPIO_PORT_B,
+	STM32_GPIO_PORT_C,
+	STM32_GPIO_PORT_D,
+	STM32_GPIO_PORT_E,
+	STM32_GPIO_PORT_F,
+	STM32_GPIO_PORT_G,
+	STM32_GPIO_PORT_H,
+	STM32_GPIO_PORT_I
+};
+
+enum stm32_gpio_pin {
+	STM32_GPIO_PIN_0 = 0,
+	STM32_GPIO_PIN_1,
+	STM32_GPIO_PIN_2,
+	STM32_GPIO_PIN_3,
+	STM32_GPIO_PIN_4,
+	STM32_GPIO_PIN_5,
+	STM32_GPIO_PIN_6,
+	STM32_GPIO_PIN_7,
+	STM32_GPIO_PIN_8,
+	STM32_GPIO_PIN_9,
+	STM32_GPIO_PIN_10,
+	STM32_GPIO_PIN_11,
+	STM32_GPIO_PIN_12,
+	STM32_GPIO_PIN_13,
+	STM32_GPIO_PIN_14,
+	STM32_GPIO_PIN_15
+};
+
+enum stm32_gpio_mode {
+	STM32_GPIO_MODE_IN = 0,
+	STM32_GPIO_MODE_OUT,
+	STM32_GPIO_MODE_AF,
+	STM32_GPIO_MODE_AN
+};
+
+enum stm32_gpio_otype {
+	STM32_GPIO_OTYPE_PP = 0,
+	STM32_GPIO_OTYPE_OD
+};
+
+enum stm32_gpio_speed {
+	STM32_GPIO_SPEED_2M = 0,
+	STM32_GPIO_SPEED_25M,
+	STM32_GPIO_SPEED_50M,
+	STM32_GPIO_SPEED_100M
+};
+
+enum stm32_gpio_pupd {
+	STM32_GPIO_PUPD_NO = 0,
+	STM32_GPIO_PUPD_UP,
+	STM32_GPIO_PUPD_DOWN
+};
+
+enum stm32_gpio_af {
+	STM32_GPIO_AF0 = 0,
+	STM32_GPIO_AF1,
+	STM32_GPIO_AF2,
+	STM32_GPIO_AF3,
+	STM32_GPIO_AF4,
+	STM32_GPIO_AF5,
+	STM32_GPIO_AF6,
+	STM32_GPIO_AF7,
+	STM32_GPIO_AF8,
+	STM32_GPIO_AF9,
+	STM32_GPIO_AF10,
+	STM32_GPIO_AF11,
+	STM32_GPIO_AF12,
+	STM32_GPIO_AF13,
+	STM32_GPIO_AF14,
+	STM32_GPIO_AF15
+};
+
+struct stm32_gpio_dsc {
+	enum stm32_gpio_port	port;
+	enum stm32_gpio_pin	pin;
+};
+
+struct stm32_gpio_ctl {
+	enum stm32_gpio_mode	mode;
+	enum stm32_gpio_otype	otype;
+	enum stm32_gpio_speed	speed;
+	enum stm32_gpio_pupd	pupd;
+	enum stm32_gpio_af	af;
+};
+
+static inline unsigned stm32_gpio_to_port(unsigned gpio)
+{
+	return gpio / 16;
+}
+
+static inline unsigned stm32_gpio_to_pin(unsigned gpio)
+{
+	return gpio % 16;
+}
+
+int stm32_gpio_config(const struct stm32_gpio_dsc *gpio_dsc,
+		const struct stm32_gpio_ctl *gpio_ctl);
+int stm32_gpout_set(const struct stm32_gpio_dsc *gpio_dsc, int state);
+
+#endif /* _STM32_GPIO_H_ */
diff --git a/arch/arm/include/asm/arch-stm32f4/stm32.h b/arch/arm/include/asm/arch-stm32f4/stm32.h
new file mode 100644
index 0000000..a9f88db
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f4/stm32.h
@@ -0,0 +1,108 @@
+/*
+ * (C) Copyright 2011
+ * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com
+ *
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _MACH_STM32_H_
+#define _MACH_STM32_H_
+
+/*
+ * Peripheral memory map
+ */
+#define STM32_PERIPH_BASE	0x40000000
+#define STM32_APB1PERIPH_BASE	(STM32_PERIPH_BASE + 0x00000000)
+#define STM32_APB2PERIPH_BASE	(STM32_PERIPH_BASE + 0x00010000)
+#define STM32_AHB1PERIPH_BASE	(STM32_PERIPH_BASE + 0x00020000)
+#define STM32_AHB2PERIPH_BASE	(STM32_PERIPH_BASE + 0x10000000)
+
+#define STM32_BUS_MASK		0xFFFF0000
+
+/*
+ * Register maps
+ */
+struct stm32_rcc_regs {
+	u32 cr;		/* RCC clock control */
+	u32 pllcfgr;	/* RCC PLL configuration */
+	u32 cfgr;	/* RCC clock configuration */
+	u32 cir;	/* RCC clock interrupt */
+	u32 ahb1rstr;	/* RCC AHB1 peripheral reset */
+	u32 ahb2rstr;	/* RCC AHB2 peripheral reset */
+	u32 ahb3rstr;	/* RCC AHB3 peripheral reset */
+	u32 rsv0;
+	u32 apb1rstr;	/* RCC APB1 peripheral reset */
+	u32 apb2rstr;	/* RCC APB2 peripheral reset */
+	u32 rsv1[2];
+	u32 ahb1enr;	/* RCC AHB1 peripheral clock enable */
+	u32 ahb2enr;	/* RCC AHB2 peripheral clock enable */
+	u32 ahb3enr;	/* RCC AHB3 peripheral clock enable */
+	u32 rsv2;
+	u32 apb1enr;	/* RCC APB1 peripheral clock enable */
+	u32 apb2enr;	/* RCC APB2 peripheral clock enable */
+	u32 rsv3[2];
+	u32 ahb1lpenr;	/* RCC AHB1 periph clk enable in low pwr mode */
+	u32 ahb2lpenr;	/* RCC AHB2 periph clk enable in low pwr mode */
+	u32 ahb3lpenr;	/* RCC AHB3 periph clk enable in low pwr mode */
+	u32 rsv4;
+	u32 apb1lpenr;	/* RCC APB1 periph clk enable in low pwr mode */
+	u32 apb2lpenr;	/* RCC APB2 periph clk enable in low pwr mode */
+	u32 rsv5[2];
+	u32 bdcr;	/* RCC Backup domain control */
+	u32 csr;	/* RCC clock control & status */
+	u32 rsv6[2];
+	u32 sscgr;	/* RCC spread spectrum clock generation */
+	u32 plli2scfgr;	/* RCC PLLI2S configuration */
+	u32 pllsaicfgr;
+	u32 dckcfgr;
+};
+
+struct stm32_pwr_regs {
+	u32 cr;
+	u32 csr;
+};
+
+struct stm32_flash_regs {
+	u32 acr;
+	u32 key;
+	u32 optkeyr;
+	u32 sr;
+	u32 cr;
+	u32 optcr;
+	u32 optcr1;
+};
+
+/*
+ * Registers access macros
+ */
+#define STM32_RCC_BASE		(STM32_AHB1PERIPH_BASE + 0x3800)
+#define STM32_RCC		((struct stm32_rcc_regs *)STM32_RCC_BASE)
+
+#define STM32_PWR_BASE		(STM32_APB1PERIPH_BASE + 0x7000)
+#define STM32_PWR		((struct stm32_pwr_regs *)STM32_PWR_BASE)
+
+#define STM32_FLASH_BASE	(STM32_AHB1PERIPH_BASE + 0x3C00)
+#define STM32_FLASH		((struct stm32_flash_regs *)STM32_FLASH_BASE)
+
+#define STM32_FLASH_SR_BSY		(1 << 16)
+
+#define STM32_FLASH_CR_PG		(1 << 0)
+#define STM32_FLASH_CR_SER		(1 << 1)
+#define STM32_FLASH_CR_STRT		(1 << 16)
+#define STM32_FLASH_CR_LOCK		(1 << 31)
+#define STM32_FLASH_CR_SNB_OFFSET	3
+
+enum clock {
+	CLOCK_CORE,
+	CLOCK_AHB,
+	CLOCK_APB1,
+	CLOCK_APB2
+};
+
+int configure_clocks(void);
+unsigned long clock_get(enum clock clck);
+
+#endif /* _MACH_STM32_H_ */