Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  ARM: Add Calxeda Highbank platform
  dkb: make mmc command as default enabled
  Marvell: dkb: add mmc support
  ARM: pantheon: add mmc definition
  davinci: remove config.mk file from the sources
  ARM:AM33XX: Add support for TI AM335X EVM
  ARM:AM33XX: Added timer support
  ARM:AM33XX: Add emif/ddr support
  ARM:AM33XX: Add clock definitions
  ARM:AM33XX: Added support for AM33xx
  omap3/emif4: fix registers definition
  davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM
  davinci: emac: add support for more than 1 PHYs
  davinci: emac: add new features to autonegotiate for EMAC
  da850evm: Move LPSC configuration to board_early_init_f()
  omap4_panda: Build in cmd_gpio support on panda
  omap: Don't use gpio_free to change direction to input
  mmc: omap: Allow OMAP_HSMMC[23]_BASE to be unset
  OMAP3: overo : Add environment variable optargs to bootargs
  OMAP3: overo: Move ethernet CS4 configuration to execute based on board id
  OMAP3: overo : Use ttyO2 instead of ttyS2.
  da830: add support for NAND boot mode
  dm36x: revert cache disable patch
  dm644X: revert cache disable patch
  devkit8000: Add malloc space
  omap: spl: fix build break due to changes in FAT
  OMAP3 SPL: Provide weak omap_rev_string
  omap: beagle: Use ubifs instead of jffs2 for nand boot
  omap: overo: Disable pull-ups on camera PCLK, HS and VS signals
  omap: overo: Configure mux for gpio10
  SPL: Add DMA library
  omap3: Add interface for omap3 DMA
  omap3: Add DMA register accessors
  omap3: Add Base register for DMA
  arm, davinci: add missing LSPC define for MMC/SD1
  U-Boot/SPL: omap4: Make ddr pre-calculated timings as default.
  DaVinci: correct MDSTAT.STATE mask
  omap4: splitting padconfs into common, 4430 and 4460
  omap4: adding revision detection for 4460 ES1.1
  omap4: replacing OMAP4_CONTROL with OMAP4430_CONTROL
  gplug: fixed build error as a result of code cleanup patch
  kirkwood_spi: add dummy spi_init()
  gpio: mvmfp: reduce include platform file
  ARM: orion5x: reduce dependence of including platform file
  serial: reduce include platform file for marvell chip
  ARM: kirkwood: reduce dependence of including platform file
  ARM: armada100: reduce dependence of including platform file
  ARM: pantheon: reduce dependence of including platform file
  Armada100: Add env storage support for Marvell gplugD
  Armada100: Add SPI flash support for Marvell gplugD
  Armada100: Add SPI support for Marvell gplugD
  SPI: Add SPI driver support for Marvell Armada100
  dreamplug: initial board support.
  imx: fix coding style
  misc: pmic: drop old Freescale's pmic driver
  MX31: mx31pdk: use new pmic driver
  MX31: mx31ads: use new pmic driver
  MX31: mx31_litekit: use new pmic driver
  MX5: mx53evk: use new pmic driver
  MX5: mx51evk: use new pmic driver
  MX35: mx35pdk: use new pmic driver
  misc: pmic: addI2C  support to pmic_fsl driver
  misc: pmic: use I2C_SET_BUS in pmic I2C
  MX5: efikamx/efikasb: use new pmic driver
  MX3: qong: use new pmic driver
  RTC: Switch mc13783 to generic pmic code
  MX5: vision2: use new pmic driver
  misc: pmic: Freescale PMIC switches to generic PMIC driver
  misc:pmic:samsung Enable PMIC driver at GONI target
  misc:pmic:max8998 MAX8998 support at a new PMIC driver.
  misc:pmic:core New generic PMIC driver
  mx31pdk: Remove unneeded config
  mx31: provide readable WEIM CS accessor
  MX51: vision2: Set global macros
  I2C: Add i2c_get/set_speed() to mxc_i2c.c
  ARM: Update mach-types
  devkit8000: Add config to enable SPL MMC boot
  devkit8000: protect board_mmc_init
  arm, post: add missing post_time_ms for arm
  cosmetic, post: Codingstyle cleanup
  arm, logbuffer: make it compileclean
  tegra2: Enable MMC for Seaboard
  tegra2: Add more pinmux functions
  tegra2: Rename PIN_ to PINGRP_
  tegra2: Add more clock functions
  tegra2: Clean up board code a little
  tegra2: Rename CLOCK_PLL_ID to CLOCK_ID

1 files changed, 125 insertions, 0 deletions

diff --git a/arch/arm/include/asm/arch-armada100/cpu.h b/arch/arm/include/asm/arch-armada100/cpu.h
index 0518a6a..da42773 100644
--- a/arch/arm/include/asm/arch-armada100/cpu.h
+++ b/arch/arm/include/asm/arch-armada100/cpu.h
@@ -29,6 +29,131 @@
 #include <asm/system.h>
 
 /*
+ * Main Power Management (MPMU) Registers
+ * Refer Datasheet Appendix A.8
+ */
+struct armd1mpmu_registers {
+	u8 pad0[0x08 - 0x00];
+	u32 fccr;	/*0x0008*/
+	u32 pocr;	/*0x000c*/
+	u32 posr;	/*0x0010*/
+	u32 succr;	/*0x0014*/
+	u8 pad1[0x030 - 0x014 - 4];
+	u32 gpcr;	/*0x0030*/
+	u8 pad2[0x200 - 0x030 - 4];
+	u32 wdtpcr;	/*0x0200*/
+	u8 pad3[0x1000 - 0x200 - 4];
+	u32 apcr;	/*0x1000*/
+	u32 apsr;	/*0x1004*/
+	u8 pad4[0x1020 - 0x1004 - 4];
+	u32 aprr;	/*0x1020*/
+	u32 acgr;	/*0x1024*/
+	u32 arsr;	/*0x1028*/
+};
+
+/*
+ * Application Subsystem Power Management
+ * Refer Datasheet Appendix A.9
+ */
+struct armd1apmu_registers {
+	u32 pcr;		/* 0x000 */
+	u32 ccr;		/* 0x004 */
+	u32 pad1;
+	u32 ccsr;		/* 0x00C */
+	u32 fc_timer;		/* 0x010 */
+	u32 pad2;
+	u32 ideal_cfg;		/* 0x018 */
+	u8 pad3[0x04C - 0x018 - 4];
+	u32 lcdcrc;		/* 0x04C */
+	u32 cciccrc;		/* 0x050 */
+	u32 sd1crc;		/* 0x054 */
+	u32 sd2crc;		/* 0x058 */
+	u32 usbcrc;		/* 0x05C */
+	u32 nfccrc;		/* 0x060 */
+	u32 dmacrc;		/* 0x064 */
+	u32 pad4;
+	u32 buscrc;		/* 0x06C */
+	u8 pad5[0x07C - 0x06C - 4];
+	u32 wake_clr;		/* 0x07C */
+	u8 pad6[0x090 - 0x07C - 4];
+	u32 core_status;	/* 0x090 */
+	u32 rfsc;		/* 0x094 */
+	u32 imr;		/* 0x098 */
+	u32 irwc;		/* 0x09C */
+	u32 isr;		/* 0x0A0 */
+	u8 pad7[0x0B0 - 0x0A0 - 4];
+	u32 mhst;		/* 0x0B0 */
+	u32 msr;		/* 0x0B4 */
+	u8 pad8[0x0C0 - 0x0B4 - 4];
+	u32 msst;		/* 0x0C0 */
+	u32 pllss;		/* 0x0C4 */
+	u32 smb;		/* 0x0C8 */
+	u32 gccrc;		/* 0x0CC */
+	u8 pad9[0x0D4 - 0x0CC - 4];
+	u32 smccrc;		/* 0x0D4 */
+	u32 pad10;
+	u32 xdcrc;		/* 0x0DC */
+	u32 sd3crc;		/* 0x0E0 */
+	u32 sd4crc;		/* 0x0E4 */
+	u8 pad11[0x0F0 - 0x0E4 - 4];
+	u32 cfcrc;		/* 0x0F0 */
+	u32 mspcrc;		/* 0x0F4 */
+	u32 cmucrc;		/* 0x0F8 */
+	u32 fecrc;		/* 0x0FC */
+	u32 pciecrc;		/* 0x100 */
+	u32 epdcrc;		/* 0x104 */
+};
+
+/*
+ * APB1 Clock Reset/Control Registers
+ * Refer Datasheet Appendix A.10
+ */
+struct armd1apb1_registers {
+	u32 uart1;	/*0x000*/
+	u32 uart2;	/*0x004*/
+	u32 gpio;	/*0x008*/
+	u32 pwm1;	/*0x00c*/
+	u32 pwm2;	/*0x010*/
+	u32 pwm3;	/*0x014*/
+	u32 pwm4;	/*0x018*/
+	u8 pad0[0x028 - 0x018 - 4];
+	u32 rtc;	/*0x028*/
+	u32 twsi0;	/*0x02c*/
+	u32 kpc;	/*0x030*/
+	u32 timers;	/*0x034*/
+	u8 pad1[0x03c - 0x034 - 4];
+	u32 aib;	/*0x03c*/
+	u32 sw_jtag;	/*0x040*/
+	u32 timer1;	/*0x044*/
+	u32 onewire;	/*0x048*/
+	u8 pad2[0x050 - 0x048 - 4];
+	u32 asfar;	/*0x050 AIB Secure First Access Reg*/
+	u32 assar;	/*0x054 AIB Secure Second Access Reg*/
+	u8 pad3[0x06c - 0x054 - 4];
+	u32 twsi1;	/*0x06c*/
+	u32 uart3;	/*0x070*/
+	u8 pad4[0x07c - 0x070 - 4];
+	u32 timer2;	/*0x07C*/
+	u8 pad5[0x084 - 0x07c - 4];
+	u32 ac97;	/*0x084*/
+};
+
+/*
+* APB2 Clock Reset/Control Registers
+* Refer Datasheet Appendix A.11
+*/
+struct armd1apb2_registers {
+	u32 pad1[0x01C - 0x000];
+	u32 ssp1_clkrst;		/* 0x01C */
+	u32 ssp2_clkrst;		/* 0x020 */
+	u32 pad2[0x04C - 0x020 - 4];
+	u32 ssp3_clkrst;		/* 0x04C */
+	u32 pad3[0x058 - 0x04C - 4];
+	u32 ssp4_clkrst;		/* 0x058 */
+	u32 ssp5_clkrst;		/* 0x05C */
+};
+
+/*
  * CPU Interface Registers
  * Refer Datasheet Appendix A.2
  */