diff options
| author | Daniel Kochmański <dkochmanski@turtle-solutions.eu> | 2015-05-26 17:00:42 +0200 |
|---|---|---|
| committer | Hans de Goede <hdegoede@redhat.com> | 2015-05-29 13:46:36 +0200 |
| commit | f76eba38b3eda905ff3bdc18dd1240d3dcbc6e5a (patch) | |
| tree | 56a788b048b1f8121f45ac335fb98ce157c9eb9a /arch/arm/cpu | |
| parent | d0f4200392515194bf67213165be906e5b9e5748 (diff) | |
| download | u-boot-imx-f76eba38b3eda905ff3bdc18dd1240d3dcbc6e5a.zip u-boot-imx-f76eba38b3eda905ff3bdc18dd1240d3dcbc6e5a.tar.gz u-boot-imx-f76eba38b3eda905ff3bdc18dd1240d3dcbc6e5a.tar.bz2 | |
sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory
This commit adds support to the sunxi SPL to load u-boot from the internal
NAND. Note this only adds support to access the boot partitions to load
u-boot, full NAND support to load the kernel, etc. from the nand data
partition will come later.
Signed-off-by: Roy Spliet <r.spliet@ultimaker.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Diffstat (limited to 'arch/arm/cpu')
| -rw-r--r-- | arch/arm/cpu/armv7/sunxi/board.c | 14 |
1 files changed, 12 insertions, 2 deletions
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index 23aa249..a82c8b9 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -119,11 +119,20 @@ void s_init(void) #ifdef CONFIG_SPL_BUILD /* The sunxi internal brom will try to loader external bootloader * from mmc0, nand flash, mmc2. - * Unfortunately we can't check how SPL was loaded so assume - * it's always the first SD/MMC controller + * + * Unfortunately we can't check how SPL was loaded so assume it's + * always the first SD/MMC controller, unless it was explicitly + * stated that SPL is on nand flash. */ u32 spl_boot_device(void) { +#if defined(CONFIG_SPL_NAND_SUPPORT) + /* + * This is compile time configuration informing SPL, that it + * was loaded from nand flash. + */ + return BOOT_DEVICE_NAND; +#else /* * When booting from the SD card, the "eGON.BT0" signature is expected * to be found in memory at the address 0x0004 (see the "mksunxiboot" @@ -144,6 +153,7 @@ u32 spl_boot_device(void) return BOOT_DEVICE_MMC1; else return BOOT_DEVICE_BOARD; +#endif } /* No confirmation data available in SPL yet. Hardcode bootmode */ |