diff options
author | Lokesh Vutla <lokeshvutla@ti.com> | 2013-08-23 17:34:17 +0530 |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2013-09-20 16:57:40 -0400 |
commit | e22cc0cf137149bea3a06bb29ffe06e82d8edb84 (patch) | |
tree | 40da8d76dbf33228a3cfff8e3e2fc0899c0be7c1 /arch/arm/cpu | |
parent | d3d33daf1112d3b1c6c330422740a4e210259f88 (diff) | |
download | u-boot-imx-e22cc0cf137149bea3a06bb29ffe06e82d8edb84.zip u-boot-imx-e22cc0cf137149bea3a06bb29ffe06e82d8edb84.tar.gz u-boot-imx-e22cc0cf137149bea3a06bb29ffe06e82d8edb84.tar.bz2 |
ARM: OMAP5: Avoid writing into LDO SRAM bits
Writing magic bits into LDO SRAM was suggested only for OMAP5432
ES1.0. Now these are no longer applicable. Moreover these bits should
not be overwritten as they are loaded from EFUSE. So avoid
writing into these registers.
Boot tested on OMAP5432 ES2.0
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Diffstat (limited to 'arch/arm/cpu')
-rw-r--r-- | arch/arm/cpu/armv7/omap-common/clocks-common.c | 7 | ||||
-rw-r--r-- | arch/arm/cpu/armv7/omap5/prcm-regs.c | 12 |
2 files changed, 0 insertions, 19 deletions
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index 7580594..ab0c568 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -589,13 +589,6 @@ void scale_vcores(struct vcores_data const *vcores) val = optimize_vcore_voltage(&vcores->iva); do_scale_vcore(vcores->iva.addr, val, vcores->iva.pmic); - - if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) { - /* Configure LDO SRAM "magic" bits */ - writel(2, (*prcm)->prm_sldo_core_setup); - writel(2, (*prcm)->prm_sldo_mpu_setup); - writel(2, (*prcm)->prm_sldo_mm_setup); - } } static inline void enable_clock_domain(u32 const clkctrl_reg, u32 enable_mode) diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c index 579818d..5a3d52c 100644 --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -286,12 +286,6 @@ struct prcm_regs const omap5_es1_prcm = { .prm_vc_val_bypass = 0x4ae07ba0, .prm_vc_cfg_i2c_mode = 0x4ae07bb4, .prm_vc_cfg_i2c_clk = 0x4ae07bb8, - .prm_sldo_core_setup = 0x4ae07bc4, - .prm_sldo_core_ctrl = 0x4ae07bc8, - .prm_sldo_mpu_setup = 0x4ae07bcc, - .prm_sldo_mpu_ctrl = 0x4ae07bd0, - .prm_sldo_mm_setup = 0x4ae07bd4, - .prm_sldo_mm_ctrl = 0x4ae07bd8, /* SCRM stuff, used by some boards */ .scrm_auxclk0 = 0x4ae0a310, @@ -735,12 +729,6 @@ struct prcm_regs const omap5_es2_prcm = { .prm_vc_cfg_i2c_mode = 0x4ae07cb4, .prm_vc_cfg_i2c_clk = 0x4ae07cb8, - .prm_sldo_core_setup = 0x4ae07cc4, - .prm_sldo_core_ctrl = 0x4ae07cc8, - .prm_sldo_mpu_setup = 0x4ae07ccc, - .prm_sldo_mpu_ctrl = 0x4ae07cd0, - .prm_sldo_mm_setup = 0x4ae07cd4, - .prm_sldo_mm_ctrl = 0x4ae07cd8, .prm_abbldo_mpu_setup = 0x4ae07cdc, .prm_abbldo_mpu_ctrl = 0x4ae07ce0, |