fpga: zynq: Add support for loading bitstream

Devcfg device requires to load bitstream in binary format.
But u-boot also has an option for loading bitstream in bit
format. Let's handle both cases by zynqpl driver.
Also add suport for loading partial bitstreams.

The first driver version was done by:
Joe Hershberger <joe.hershberger@ni.com>

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@ti.com>

1 files changed, 35 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c
index 5a8674a..52048c6 100644
--- a/arch/arm/cpu/armv7/zynq/slcr.c
+++ b/arch/arm/cpu/armv7/zynq/slcr.c
@@ -28,6 +28,9 @@
 #define SLCR_LOCK_MAGIC		0x767B
 #define SLCR_UNLOCK_MAGIC	0xDF0D
 
+#define SLCR_IDCODE_MASK	0x1F000
+#define SLCR_IDCODE_SHIFT	12
+
 static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */
 
 void zynq_slcr_lock(void)
@@ -87,3 +90,35 @@ void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk)
 out:
 	zynq_slcr_lock();
 }
+
+void zynq_slcr_devcfg_disable(void)
+{
+	zynq_slcr_unlock();
+
+	/* Disable AXI interface */
+	writel(0xFFFFFFFF, &slcr_base->fpga_rst_ctrl);
+
+	/* Set Level Shifters DT618760 */
+	writel(0xA, &slcr_base->lvl_shftr_en);
+
+	zynq_slcr_lock();
+}
+
+void zynq_slcr_devcfg_enable(void)
+{
+	zynq_slcr_unlock();
+
+	/* Set Level Shifters DT618760 */
+	writel(0xF, &slcr_base->lvl_shftr_en);
+
+	/* Disable AXI interface */
+	writel(0x0, &slcr_base->fpga_rst_ctrl);
+
+	zynq_slcr_lock();
+}
+
+u32 zynq_slcr_get_idcode(void)
+{
+	return (readl(&slcr_base->pss_idcode) & SLCR_IDCODE_MASK) >>
+							SLCR_IDCODE_SHIFT;
+}