diff options
| author | Marek Vasut <marex@denx.de> | 2012-05-03 05:47:18 +0000 |
|---|---|---|
| committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2012-05-15 08:31:32 +0200 |
| commit | d2f7ae14d387cf1882a3a38d27c8f237fa191a26 (patch) | |
| tree | c794a1a763de6651fd0fa7b0047a38314f8106ac /arch/arm/cpu | |
| parent | 6725ebdff566df1e7bb137f03e775b9339595e5f (diff) | |
| download | u-boot-imx-d2f7ae14d387cf1882a3a38d27c8f237fa191a26.zip u-boot-imx-d2f7ae14d387cf1882a3a38d27c8f237fa191a26.tar.gz u-boot-imx-d2f7ae14d387cf1882a3a38d27c8f237fa191a26.tar.bz2 | |
Revert "i.MX28: Enable additional DRAM address bits"
This reverts commit 69d26d09de1cb93e0a09ca71d9f0d41a66f0756a.
Apparently, this commit got mainline only because of out-of-tree
port and causes breakage on board that is mainline. Revert.
Reason:
* The OOT board has 512MB of DRAM, enabling this additional address
line enabled it to work fine with 512MB of RAM.
* Every mainline port has max. 256MB of DRAM, therefore this revert
has no impact on any mainline port
* Though this caused a problem with new M28 board with 256MB of DRAM
where the chips are wired differently. The patch-to-be-reverted
caused the DRAM to behave like this:
[128MB chunk #1][128MB chunk #1 again][128MB chunk #2][128MB chunk #2 again]
Therefore to retain the current one-memory-init-rules-them-all situation,
revert this patch until another board emerges and will actually be pushed
mainline that needs different setup.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Diffstat (limited to 'arch/arm/cpu')
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c index 911bbef..0f825ed 100644 --- a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c @@ -39,7 +39,7 @@ uint32_t dram_vals[] = { 0x00000000, 0x00000100, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00010101, 0x01010101, - 0x000f0f01, 0x0f02010a, 0x00000000, 0x00010101, + 0x000f0f01, 0x0f02020a, 0x00000000, 0x00010101, 0x00000100, 0x00000100, 0x00000000, 0x00000002, 0x01010000, 0x05060302, 0x06005003, 0x0a0000c8, 0x02009c40, 0x0000030c, 0x0036a609, 0x031a0612, |