ARM: UniPhier: add UART initialization routine for low-level debug

The low-level debugging functions are useful to debug the early boot
stage where the full UART driver is not available.

UniPhier SoCs need to initialize the UART port 0 to use this feature.
The initialization routine is called at the very entry of the
lowlevel_init().

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

7 files changed, 104 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv7/uniphier/lowlevel_init.S b/arch/arm/cpu/armv7/uniphier/lowlevel_init.S
index 0ea12d3..c208ab6 100644
--- a/arch/arm/cpu/armv7/uniphier/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/uniphier/lowlevel_init.S
@@ -26,6 +26,10 @@ ENTRY(lowlevel_init)
 	orr	r0, r0, #(CR_C | CR_M)		@ enable MMU and Dcache
 	mcr	p15, 0, r0, c1, c0, 0
 
+#ifdef CONFIG_DEBUG_LL
+	bl	setup_lowlevel_debug
+#endif
+
 	/*
 	 * Now we are using the page table embedded in the Boot ROM.
 	 * It is not handy since it is not a straight mapped table for sLD3.
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
index 8794629..0752906 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
@@ -5,6 +5,7 @@
 obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
 obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
 obj-y += boot-mode.o
+obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
 obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \
 								clkrst_init.o
 obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/lowlevel_debug.S b/arch/arm/cpu/armv7/uniphier/ph1-ld4/lowlevel_debug.S
new file mode 100644
index 0000000..c0778a0
--- /dev/null
+++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/lowlevel_debug.S
@@ -0,0 +1,29 @@
+/*
+ * On-chip UART initializaion for low-level debugging
+ *
+ * Copyright (C) 2014 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <linux/linkage.h>
+#include <asm/arch/sg-regs.h>
+
+#define UART_CLK		36864000
+#include <asm/arch/debug-uart.S>
+
+ENTRY(setup_lowlevel_debug)
+		init_debug_uart	r0, r1, r2
+
+		/* UART Port 0 */
+		set_pinsel	85, 1, r0, r1
+		set_pinsel	88, 1, r0, r1
+
+		ldr		r0, =SG_IECTRL
+		ldr		r1, [r0]
+		orr		r1, r1, #1
+		str		r1, [r0]
+
+		mov		pc, lr
+ENDPROC(setup_lowlevel_debug)
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
index cee7878..8206e2a 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
@@ -5,6 +5,7 @@
 obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
 obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
 obj-y += boot-mode.o
+obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
 obj-$(CONFIG_SOC_INIT) += sbc_init.o sg_init.o pll_init.o clkrst_init.o
 obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o
 obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o ddrphy_init.o
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S b/arch/arm/cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S
new file mode 100644
index 0000000..a793b7c
--- /dev/null
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/lowlevel_debug.S
@@ -0,0 +1,39 @@
+/*
+ * On-chip UART initializaion for low-level debugging
+ *
+ * Copyright (C) 2014 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <linux/linkage.h>
+#include <asm/arch/sc-regs.h>
+#include <asm/arch/sg-regs.h>
+
+#define UART_CLK		73728000
+#include <asm/arch/debug-uart.S>
+
+ENTRY(setup_lowlevel_debug)
+		ldr		r0, =SC_CLKCTRL
+		ldr		r1, [r0]
+		orr		r1, r1, #SC_CLKCTRL_CLK_PERI
+		str		r1, [r0]
+
+		init_debug_uart	r0, r1, r2
+
+		/* UART Port 0 */
+		set_pinsel	127, 0, r0, r1
+		set_pinsel	128, 0, r0, r1
+
+		ldr		r0, =SG_LOADPINCTRL
+		mov		r1, #1
+		str		r1, [r0]
+
+		ldr		r0, =SG_IECTRL
+		ldr		r1, [r0]
+		orr		r1, r1, #1
+		str		r1, [r0]
+
+		mov		pc, lr
+ENDPROC(setup_lowlevel_debug)
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
index 8794629..0752906 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
@@ -5,6 +5,7 @@
 obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
 obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o
 obj-y += boot-mode.o
+obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o
 obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \
 								clkrst_init.o
 obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/lowlevel_debug.S b/arch/arm/cpu/armv7/uniphier/ph1-sld8/lowlevel_debug.S
new file mode 100644
index 0000000..a413e5f
--- /dev/null
+++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/lowlevel_debug.S
@@ -0,0 +1,29 @@
+/*
+ * On-chip UART initializaion for low-level debugging
+ *
+ * Copyright (C) 2014 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <linux/linkage.h>
+#include <asm/arch/sg-regs.h>
+
+#define UART_CLK		80000000
+#include <asm/arch/debug-uart.S>
+
+ENTRY(setup_lowlevel_debug)
+		init_debug_uart	r0, r1, r2
+
+		/* UART Port 0 */
+		set_pinsel	70, 3, r0, r1
+		set_pinsel	71, 3, r0, r1
+
+		ldr		r0, =SG_IECTRL
+		ldr		r1, [r0]
+		orr		r1, r1, #1
+		str		r1, [r0]
+
+		mov		pc, lr
+ENDPROC(setup_lowlevel_debug)