summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
diff options
context:
space:
mode:
authorMasahiro Yamada <yamada.m@jp.panasonic.com>2014-12-06 00:03:26 +0900
committerMasahiro Yamada <yamada.m@jp.panasonic.com>2014-12-09 00:08:33 +0900
commit7a3620b24649663857d99e8ab73ec0b3bd60e50e (patch)
tree550362162350c26d1a7c853fa846632dd26a62e6 /arch/arm/cpu
parentdc7246e725cda125382df548115e73e7e000728c (diff)
downloadu-boot-imx-7a3620b24649663857d99e8ab73ec0b3bd60e50e.zip
u-boot-imx-7a3620b24649663857d99e8ab73ec0b3bd60e50e.tar.gz
u-boot-imx-7a3620b24649663857d99e8ab73ec0b3bd60e50e.tar.bz2
ARM: UniPhier: detect the number of flash banks at run-time
Some UniPhier boards are equipped with an expansion slot that some optional SRAM/NOR-flash cards can be attached to. So, run-time detection of the number of flash banks would be more user-friendly. Until this commit, UniPhier boards have achieved this by (ab)using board_flash_wp_on() because the boot failed if flash_size got zero. Fortunately, this problem was solved by commit 70879a92561a (flash: do not fail even if flash_size is zero). Now it is possible to throw away such a tricky workaround. This commit also enables CONFIG_SYS_MAX_FLASH_BANKS_DETECT for further refactoring. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Diffstat (limited to 'arch/arm/cpu')
-rw-r--r--arch/arm/cpu/armv7/uniphier/Makefile1
-rw-r--r--arch/arm/cpu/armv7/uniphier/board_early_init_r.c15
-rw-r--r--arch/arm/cpu/armv7/uniphier/support_card.c125
3 files changed, 101 insertions, 40 deletions
diff --git a/arch/arm/cpu/armv7/uniphier/Makefile b/arch/arm/cpu/armv7/uniphier/Makefile
index 0f64d25..4a7b8a9 100644
--- a/arch/arm/cpu/armv7/uniphier/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/Makefile
@@ -11,6 +11,7 @@ obj-y += cache_uniphier.o
obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o
obj-y += dram_init.o
obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o
+obj-$(CONFIG_BOARD_EARLY_INIT_R) += board_early_init_r.o
obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o
obj-$(CONFIG_UNIPHIER_SMP) += smp.o
obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o
diff --git a/arch/arm/cpu/armv7/uniphier/board_early_init_r.c b/arch/arm/cpu/armv7/uniphier/board_early_init_r.c
new file mode 100644
index 0000000..cb7e04f
--- /dev/null
+++ b/arch/arm/cpu/armv7/uniphier/board_early_init_r.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/board.h>
+
+int board_early_init_r(void)
+{
+ uniphier_board_late_init();
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/uniphier/support_card.c b/arch/arm/cpu/armv7/uniphier/support_card.c
index 40d4940..419012e 100644
--- a/arch/arm/cpu/armv7/uniphier/support_card.c
+++ b/arch/arm/cpu/armv7/uniphier/support_card.c
@@ -83,6 +83,12 @@ static int support_card_show_revision(void)
}
#endif
+int check_support_card(void)
+{
+ printf("SC: Micro Support Card ");
+ return support_card_show_revision();
+}
+
void support_card_init(void)
{
/*
@@ -94,12 +100,6 @@ void support_card_init(void)
support_card_reset_deassert();
}
-int check_support_card(void)
-{
- printf("SC: Micro Support Card ");
- return support_card_show_revision();
-}
-
#if defined(CONFIG_SMC911X)
#include <netdev.h>
@@ -112,18 +112,14 @@ int board_eth_init(bd_t *bis)
#if !defined(CONFIG_SYS_NO_FLASH)
#include <mtd/cfi_flash.h>
+#include <asm/arch/sbc-regs.h>
-#if CONFIG_SYS_MAX_FLASH_BANKS > 1
-static phys_addr_t flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS] =
- CONFIG_SYS_FLASH_BANKS_LIST;
+struct memory_bank {
+ phys_addr_t base;
+ unsigned long size;
+};
-phys_addr_t cfi_flash_bank_addr(int i)
-{
- return flash_banks_list[i];
-}
-#endif
-
-int mem_is_flash(phys_addr_t base)
+static int mem_is_flash(const struct memory_bank *mem)
{
const int loop = 128;
u32 *scratch_addr;
@@ -131,8 +127,9 @@ int mem_is_flash(phys_addr_t base)
int ret = 1;
int i;
- scratch_addr = map_physmem(base + 0x01e00000,
- sizeof(u32) * loop, MAP_NOCACHE);
+ /* just in case, use the tail of the memory bank */
+ scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop,
+ sizeof(u32) * loop, MAP_NOCACHE);
for (i = 0; i < loop; i++, scratch_addr++) {
saved_value = readl(scratch_addr);
@@ -150,31 +147,79 @@ int mem_is_flash(phys_addr_t base)
return ret;
}
-int board_flash_wp_on(void)
+#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
+ /* {address, size} */
+static const struct memory_bank memory_banks_boot_swap_off[] = {
+ {0x02000000, 0x01f00000},
+};
+
+static const struct memory_bank memory_banks_boot_swap_on[] = {
+ {0x00000000, 0x01f00000},
+};
+#endif
+
+#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
+static const struct memory_bank memory_banks_boot_swap_off[] = {
+ {0x04000000, 0x04000000},
+};
+
+static const struct memory_bank memory_banks_boot_swap_on[] = {
+ {0x00000000, 0x04000000},
+ {0x04000000, 0x04000000},
+};
+#endif
+
+static const struct memory_bank
+*flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT];
+
+phys_addr_t cfi_flash_bank_addr(int i)
{
- int i;
- int ret = 1;
+ return flash_banks_list[i]->base;
+}
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- if (mem_is_flash(cfi_flash_bank_addr(i))) {
- /*
- * We found at least one flash.
- * We need to return 0 and call flash_init().
- */
- ret = 0;
- }
-#if CONFIG_SYS_MAX_FLASH_BANKS > 1
- else {
- /*
- * We might have a SRAM here.
- * To prevent SRAM data from being destroyed,
- * we set dummy address (SDRAM).
- */
- flash_banks_list[i] = 0x80000000 + 0x10000 * i;
+unsigned long cfi_flash_bank_size(int i)
+{
+ return flash_banks_list[i]->size;
+}
+
+static void detect_num_flash_banks(void)
+{
+ const struct memory_bank *memory_bank, *end;
+
+ cfi_flash_num_flash_banks = 0;
+
+ if (boot_is_swapped()) {
+ memory_bank = memory_banks_boot_swap_on;
+ end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_on);
+ } else {
+ memory_bank = memory_banks_boot_swap_off;
+ end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_off);
+ }
+
+ for (; memory_bank < end; memory_bank++) {
+ if (cfi_flash_num_flash_banks >=
+ CONFIG_SYS_MAX_FLASH_BANKS_DETECT)
+ break;
+
+ if (mem_is_flash(memory_bank)) {
+ flash_banks_list[cfi_flash_num_flash_banks] =
+ memory_bank;
+
+ debug("flash bank found: base = 0x%lx, size = 0x%lx\n",
+ memory_bank->base, memory_bank->size);
+ cfi_flash_num_flash_banks++;
}
-#endif
}
- return ret;
+ debug("number of flash banks: %d\n", cfi_flash_num_flash_banks);
+}
+#else /* ONFIG_SYS_NO_FLASH */
+void detect_num_flash_banks(void)
+{
+};
+#endif /* ONFIG_SYS_NO_FLASH */
+
+void support_card_late_init(void)
+{
+ detect_num_flash_banks();
}
-#endif