zynqmp: Add support for IP detection via SLCR

SLCR can be used for IP configuration setting.
Add SLCR skeleton to enable run time checking.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

1 files changed, 63 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv8/zynqmp/slcr.c b/arch/arm/cpu/armv8/zynqmp/slcr.c
new file mode 100644
index 0000000..713e9a6
--- /dev/null
+++ b/arch/arm/cpu/armv8/zynqmp/slcr.c
@@ -0,0 +1,63 @@
+/*
+ * (C) Copyright 2014 - 2015 Xilinx, Inc.
+ * Michal Simek <michal.simek@xilinx.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <malloc.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/clk.h>
+
+/*
+ * zynq_slcr_mio_get_status - Get the status of MIO peripheral.
+ *
+ * @peri_name: Name of the peripheral for checking MIO status
+ * @get_pins: Pointer to array of get pin for this peripheral
+ * @num_pins: Number of pins for this peripheral
+ * @mask: Mask value
+ * @check_val: Required check value to get the status of  periph
+ */
+struct zynq_slcr_mio_get_status {
+	const char *peri_name;
+	const int *get_pins;
+	int num_pins;
+	u32 mask;
+	u32 check_val;
+};
+
+static const struct zynq_slcr_mio_get_status mio_periphs[] = {
+};
+
+/*
+ * zynq_slcr_get_mio_pin_status - Get the MIO pin status of peripheral.
+ *
+ * @periph: Name of the peripheral
+ *
+ * Returns count to indicate the number of pins configured for the
+ * given @periph.
+ */
+int zynq_slcr_get_mio_pin_status(const char *periph)
+{
+	const struct zynq_slcr_mio_get_status *mio_ptr;
+	int val, i, j;
+	int mio = 0;
+
+	for (i = 0; i < ARRAY_SIZE(mio_periphs); i++) {
+		if (strcmp(periph, mio_periphs[i].peri_name) == 0) {
+			mio_ptr = &mio_periphs[i];
+			for (j = 0; j < mio_ptr->num_pins; j++) {
+				val = readl(&slcr_base->mio_pin
+						[mio_ptr->get_pins[j]]);
+				if ((val & mio_ptr->mask) == mio_ptr->check_val)
+					mio++;
+			}
+			break;
+		}
+	}
+
+	return mio;
+}