diff options
| author | Bhupesh Sharma <bhupesh.sharma@freescale.com> | 2015-01-06 13:11:21 -0800 |
|---|---|---|
| committer | York Sun <yorksun@freescale.com> | 2015-02-24 13:08:06 -0800 |
| commit | 9c66ce662c076fc1f5e57c4e72126e41d56d0b80 (patch) | |
| tree | bb3c49d17da0fad2006a3dc2a26d96af08161bf1 /arch/arm/cpu/armv8/fsl-lsch3 | |
| parent | 38dac81b3d0e777f301ca98100bfbcab01d616c2 (diff) | |
| download | u-boot-imx-9c66ce662c076fc1f5e57c4e72126e41d56d0b80.zip u-boot-imx-9c66ce662c076fc1f5e57c4e72126e41d56d0b80.tar.gz u-boot-imx-9c66ce662c076fc1f5e57c4e72126e41d56d0b80.tar.bz2 | |
fsl-ch3/lowlevel: TZPC and TZASC programming to configure non-secure accesses
This patch ensures that the TZPC (BP147) and TZASC-400 programming
happens for LS2085A SoC only when the desired config flags are
enabled and ensures that the TZPC programming is done to allow Non-secure
(NS) + secure (S) transactions only for DCGF registers.
The TZASC component is not present on LS2085A-Rev1, so the TZASC-400
config flag is turned OFF for now.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
Diffstat (limited to 'arch/arm/cpu/armv8/fsl-lsch3')
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S | 54 |
1 files changed, 54 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S b/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S index 2a88aab..c283787 100644 --- a/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S +++ b/arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S @@ -42,6 +42,60 @@ ENTRY(lowlevel_init) ldr x0, =secondary_boot_func blr x0 2: + +#ifdef CONFIG_FSL_TZPC_BP147 + /* Set Non Secure access for all devices protected via TZPC */ + ldr x1, =TZPCDECPROT_0_SET_BASE /* Decode Protection-0 Set Reg */ + orr w0, w0, #1 << 3 /* DCFG_RESET is accessible from NS world */ + str w0, [x1] + + isb + dsb sy +#endif + +#ifdef CONFIG_FSL_TZASC_400 + /* Set TZASC so that: + * a. We use only Region0 whose global secure write/read is EN + * b. We use only Region0 whose NSAID write/read is EN + * + * NOTE: As per the CCSR map doc, TZASC 3 and TZASC 4 are just + * placeholders. + */ + ldr x1, =TZASC_GATE_KEEPER(0) + ldr x0, [x1] /* Filter 0 Gate Keeper Register */ + orr x0, x0, #1 << 0 /* Set open_request for Filter 0 */ + str x0, [x1] + + ldr x1, =TZASC_GATE_KEEPER(1) + ldr x0, [x1] /* Filter 0 Gate Keeper Register */ + orr x0, x0, #1 << 0 /* Set open_request for Filter 0 */ + str x0, [x1] + + ldr x1, =TZASC_REGION_ATTRIBUTES_0(0) + ldr x0, [x1] /* Region-0 Attributes Register */ + orr x0, x0, #1 << 31 /* Set Sec global write en, Bit[31] */ + orr x0, x0, #1 << 30 /* Set Sec global read en, Bit[30] */ + str x0, [x1] + + ldr x1, =TZASC_REGION_ATTRIBUTES_0(1) + ldr x0, [x1] /* Region-1 Attributes Register */ + orr x0, x0, #1 << 31 /* Set Sec global write en, Bit[31] */ + orr x0, x0, #1 << 30 /* Set Sec global read en, Bit[30] */ + str x0, [x1] + + ldr x1, =TZASC_REGION_ID_ACCESS_0(0) + ldr w0, [x1] /* Region-0 Access Register */ + mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */ + str w0, [x1] + + ldr x1, =TZASC_REGION_ID_ACCESS_0(1) + ldr w0, [x1] /* Region-1 Attributes Register */ + mov w0, #0xFFFFFFFF /* Set nsaid_wr_en and nsaid_rd_en */ + str w0, [x1] + + isb + dsb sy +#endif mov lr, x29 /* Restore LR */ ret ENDPROC(lowlevel_init) |