ARM: AM43xx: GP_EVM: Add support for DDR3

GP EVM has 1GB DDR3 attached(Part no: MT41K512M8RH).
Adding details for the same.
Below is the brief description of DDR3 init sequence(SW leveling):
-> Enable VTT regulator
-> Configure VTP
-> Configure DDR IO settings
-> Disable initialization and refreshes until EMIF registers are programmed.
-> Program Timing registers
-> Program leveling registers
-> Program PHY control and Temp alert and ZQ config registers.
-> Enable initialization and refreshes and configure SDRAM CONFIG register

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

2 files changed, 4 insertions, 16 deletions

diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c
index 1abbb07..d05e666 100644
--- a/arch/arm/cpu/armv7/am33xx/ddr.c
+++ b/arch/arm/cpu/armv7/am33xx/ddr.c
@@ -97,8 +97,10 @@ void config_sdram_emif4d5(const struct emif_regs *regs, int nr)
 	writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl);
 	writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config);
 
-	configure_mr(nr, 0);
-	configure_mr(nr, 1);
+	if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) {
+		configure_mr(nr, 0);
+		configure_mr(nr, 1);
+	}
 }
 
 /**
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index 5a3f285..cd6289b 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -50,20 +50,6 @@ inline u32 emif_num(u32 base)
 		return 0;
 }
 
-/*
- * Get SDRAM type connected to EMIF.
- * Assuming similar SDRAM parts are connected to both EMIF's
- * which is typically the case. So it is sufficient to get
- * SDRAM type from EMIF1.
- */
-u32 emif_sdram_type()
-{
-	struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE;
-
-	return (readl(&emif->emif_sdram_config) &
-		EMIF_REG_SDRAM_TYPE_MASK) >> EMIF_REG_SDRAM_TYPE_SHIFT;
-}
-
 static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr)
 {
 	u32 mr;