diff options
| author | Chen-Yu Tsai <wens@csie.org> | 2014-10-22 16:47:42 +0800 |
|---|---|---|
| committer | Hans de Goede <hdegoede@redhat.com> | 2014-10-24 09:35:38 +0200 |
| commit | ff2b47f6a9cc10251cc601d34241ee02933c2187 (patch) | |
| tree | 6c83971be1f3b57203d23e1bbaa3a76c1fa08aae /arch/arm/cpu/armv7/sunxi | |
| parent | 7f87ad354ba79132edca3a08d1200e1acba1f612 (diff) | |
| download | u-boot-imx-ff2b47f6a9cc10251cc601d34241ee02933c2187.zip u-boot-imx-ff2b47f6a9cc10251cc601d34241ee02933c2187.tar.gz u-boot-imx-ff2b47f6a9cc10251cc601d34241ee02933c2187.tar.bz2 | |
ARM: sunxi: Add support for uart0 on port F (mmc0)
Allwinner SoCs provide uart0 muxed with mmc0, which can then be used
with a micro SD breakout board. On the A23, this is the only way to
use uart0.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Diffstat (limited to 'arch/arm/cpu/armv7/sunxi')
| -rw-r--r-- | arch/arm/cpu/armv7/sunxi/board.c | 11 |
1 files changed, 10 insertions, 1 deletions
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index 436df8c..7d10f10 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -50,7 +50,16 @@ u32 spl_boot_mode(void) int gpio_init(void) { -#if CONFIG_CONS_INDEX == 1 && (defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I)) +#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F) +#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I) + /* disable GPB22,23 as uart0 tx,rx to avoid conflict */ + sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT); + sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT); +#endif + sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF2_UART0_TX); + sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF4_UART0_RX); + sunxi_gpio_set_pull(SUNXI_GPF(4), 1); +#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I)) sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX); sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX); sunxi_gpio_set_pull(SUNXI_GPB(23), SUNXI_GPIO_PULL_UP); |