sunxi: Add sun5i support

Add support for the Allwinner A13 and A10s SoCs also know as the Allwinner
sun5i family, and the A13-OLinuXinoM A13 based and r7-tv-dongle A10s based
boards.

The only differences compared to the already supported sun4i and sun7i
families are all in the DRAM controller initialization:

-Different hcpr values
-Different MBUS settings
-Some other small initialization changes

Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Oliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

4 files changed, 43 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
index 856d353..6c70639 100644
--- a/arch/arm/cpu/armv7/sunxi/Makefile
+++ b/arch/arm/cpu/armv7/sunxi/Makefile
@@ -12,6 +12,7 @@ obj-y	+= board.o
 obj-y	+= clock.o
 obj-y	+= pinmux.o
 obj-$(CONFIG_SUN4I)	+= clock_sun4i.o
+obj-$(CONFIG_SUN5I)	+= clock_sun4i.o
 obj-$(CONFIG_SUN7I)	+= clock_sun4i.o
 
 ifndef CONFIG_SPL_BUILD
@@ -20,6 +21,7 @@ endif
 
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SUN4I)	+= dram.o
+obj-$(CONFIG_SUN5I)	+= dram.o
 obj-$(CONFIG_SUN7I)	+= dram.o
 ifdef CONFIG_SPL_FEL
 obj-y	+= start.o
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index c80b421..0118f5b 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -47,9 +47,21 @@ u32 spl_boot_mode(void)
 
 int gpio_init(void)
 {
+#if CONFIG_CONS_INDEX == 1 && (defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I))
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX);
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX);
 	sunxi_gpio_set_pull(SUNXI_GPB(23), 1);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN5I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB19_UART0_TX);
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB20_UART0_RX);
+	sunxi_gpio_set_pull(SUNXI_GPB(20), 1);
+#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_SUN5I)
+	sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG3_UART1_TX);
+	sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG4_UART1_RX);
+	sunxi_gpio_set_pull(SUNXI_GPG(4), 1);
+#else
+#error Unsupported console port number. Please fix pin mux settings in board.c
+#endif
 
 	return 0;
 }
diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c
index b4b5089..5cf35ac 100644
--- a/arch/arm/cpu/armv7/sunxi/cpu_info.c
+++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c
@@ -15,6 +15,14 @@ int print_cpuinfo(void)
 {
 #ifdef CONFIG_SUN4I
 	puts("CPU:   Allwinner A10 (SUN4I)\n");
+#elif defined CONFIG_SUN5I
+	u32 val = readl(SUNXI_SID_BASE + 0x08);
+	switch ((val >> 12) & 0xf) {
+	case 0: puts("CPU:   Allwinner A12 (SUN5I)\n"); break;
+	case 3: puts("CPU:   Allwinner A13 (SUN5I)\n"); break;
+	case 7: puts("CPU:   Allwinner A10s (SUN5I)\n"); break;
+	default: puts("CPU:   Allwinner A1X (SUN5I)\n");
+	}
 #elif defined CONFIG_SUN7I
 	puts("CPU:   Allwinner A20 (SUN7I)\n");
 #else
diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c
index 1de7529..0f1ceec 100644
--- a/arch/arm/cpu/armv7/sunxi/dram.c
+++ b/arch/arm/cpu/armv7/sunxi/dram.c
@@ -155,6 +155,16 @@ static void mctl_enable_dllx(u32 phase)
 }
 
 static u32 hpcr_value[32] = {
+#ifdef CONFIG_SUN5I
+	0, 0, 0, 0,
+	0, 0, 0, 0,
+	0, 0, 0, 0,
+	0, 0, 0, 0,
+	0x1031, 0x1031, 0x0735, 0x1035,
+	0x1035, 0x0731, 0x1031, 0,
+	0x0301, 0x0301, 0x0301, 0x0301,
+	0x0301, 0x0301, 0x0301, 0
+#endif
 #ifdef CONFIG_SUN4I
 	0x0301, 0x0301, 0x0301, 0x0301,
 	0x0301, 0x0301, 0, 0,
@@ -257,9 +267,15 @@ static void mctl_setup_dram_clock(u32 clk)
 #if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
 	/* setup MBUS clock */
 	reg_val = CCM_MBUS_CTRL_GATE |
+#ifdef CONFIG_SUN7I
 		  CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL6) |
 		  CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(2)) |
 		  CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(2));
+#else /* defined(CONFIG_SUN5I) */
+		  CCM_MBUS_CTRL_CLK_SRC(CCM_MBUS_CTRL_CLK_SRC_PLL5) |
+		  CCM_MBUS_CTRL_N(CCM_MBUS_CTRL_N_X(1)) |
+		  CCM_MBUS_CTRL_M(CCM_MBUS_CTRL_M_X(2));
+#endif
 	writel(reg_val, &ccm->mbus_clk_cfg);
 #endif
 
@@ -468,6 +484,11 @@ unsigned long dramc_init(struct dram_para *para)
 	/* setup DRAM relative clock */
 	mctl_setup_dram_clock(para->clock);
 
+#ifdef CONFIG_SUN5I
+	/* Disable any pad power save control */
+	writel(0, &dram->ppwrsctl);
+#endif
+
 	/* reset external DRAM */
 #ifndef CONFIG_SUN7I
 	mctl_ddr3_reset();