ARM: DRA7: Add support for manual mode configuration

In addition to the regular mux configuration, certain pins of DRA7
require to have "manual mode" also programmed, when predefined
delay characteristics cannot be used for the interface.

struct iodelay_cfg_entry is introduced for populating
manual mode IO timings.
For configuring manual mode, along with the normal pad
configuration do the following steps:
- Select MODESELECT field of each assocaited PAD.
  CTRL_CORE_PAD_XXX[8]:MODESELECT = 1(Enable MANUAL_MODE macro along with mux)
- Populate A_DELAY, G_DELAY values that are specified in DATA MANUAL.
  And pass the offset of the CFG_XXX register in iodelay_cfg_entry.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>

1 files changed, 100 insertions, 1 deletions

diff --git a/arch/arm/cpu/armv7/omap5/dra7xx_iodelay.c b/arch/arm/cpu/armv7/omap5/dra7xx_iodelay.c
index 4b8ba26..9fa6e69 100644
--- a/arch/arm/cpu/armv7/omap5/dra7xx_iodelay.c
+++ b/arch/arm/cpu/armv7/omap5/dra7xx_iodelay.c
@@ -13,6 +13,7 @@
 #include <asm/arch/omap.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/clock.h>
+#include <asm/arch/mux_dra7xx.h>
 #include <asm/omap_common.h>
 
 static int isolate_io(u32 isolate)
@@ -80,7 +81,94 @@ static int update_delay_mechanism(u32 base)
 	return 0;
 }
 
-void __recalibrate_iodelay(struct pad_conf_entry const *pad, int npads)
+static u32 calculate_delay(u32 base, u16 offset, u16 den)
+{
+	u16 refclk_period, dly_cnt, ref_cnt;
+	u32 reg, q, r;
+
+	refclk_period = readl(base + CFG_REG_2_OFFSET) &
+			      CFG_REG_REFCLK_PERIOD_MASK;
+
+	reg = readl(base + offset);
+	dly_cnt = (reg & CFG_REG_DLY_CNT_MASK) >> CFG_REG_DLY_CNT_SHIFT;
+	ref_cnt = (reg & CFG_REG_REF_CNT_MASK) >> CFG_REG_REF_CNT_SHIFT;
+
+	if (!dly_cnt || !den)
+		return 0;
+
+	/*
+	 * To avoid overflow and integer truncation, delay value
+	 * is calculated as quotient + remainder.
+	 */
+	q = 5 * ((ref_cnt * refclk_period) / (dly_cnt * den));
+	r = (10 * ((ref_cnt * refclk_period) % (dly_cnt * den))) /
+		(2 * dly_cnt * den);
+
+	return q + r;
+}
+
+static u32 get_cfg_reg(u16 a_delay, u16 g_delay, u32 cpde, u32 fpde)
+{
+	u32 g_delay_coarse, g_delay_fine;
+	u32 a_delay_coarse, a_delay_fine;
+	u32 c_elements, f_elements;
+	u32 total_delay, reg = 0;
+
+	g_delay_coarse = g_delay / 920;
+	g_delay_fine = ((g_delay % 920) * 10) / 60;
+
+	a_delay_coarse = a_delay / cpde;
+	a_delay_fine = ((a_delay % cpde) * 10) / fpde;
+
+	c_elements = g_delay_coarse + a_delay_coarse;
+	f_elements = (g_delay_fine + a_delay_fine) / 10;
+
+	if (f_elements > 22) {
+		total_delay = c_elements * cpde + f_elements * fpde;
+
+		c_elements = total_delay / cpde;
+		f_elements = (total_delay % cpde) / fpde;
+	}
+
+	reg = (c_elements << CFG_X_COARSE_DLY_SHIFT) & CFG_X_COARSE_DLY_MASK;
+	reg |= (f_elements << CFG_X_FINE_DLY_SHIFT) & CFG_X_FINE_DLY_MASK;
+	reg |= CFG_X_SIGNATURE << CFG_X_SIGNATURE_SHIFT;
+	reg |= CFG_X_LOCK << CFG_X_LOCK_SHIFT;
+
+	return reg;
+}
+
+static int do_set_iodelay(u32 base, struct iodelay_cfg_entry const *array,
+			   int niodelays)
+{
+	struct iodelay_cfg_entry *iodelay = (struct iodelay_cfg_entry *)array;
+	u32 reg, cpde, fpde, i;
+
+	if (!niodelays)
+		return 0;
+
+	cpde = calculate_delay((*ctrl)->iodelay_config_base, CFG_REG_3_OFFSET,
+			       88);
+	if (!cpde)
+		return ERR_CPDE;
+
+	fpde = calculate_delay((*ctrl)->iodelay_config_base, CFG_REG_4_OFFSET,
+			       264);
+	if (!fpde)
+		return ERR_FPDE;
+
+	for (i = 0; i < niodelays; i++, iodelay++) {
+		reg = get_cfg_reg(iodelay->a_delay, iodelay->g_delay, cpde,
+				  fpde);
+		writel(reg, base + iodelay->offset);
+	}
+
+	return 0;
+}
+
+void __recalibrate_iodelay(struct pad_conf_entry const *pad, int npads,
+			   struct iodelay_cfg_entry const *iodelay,
+			   int niodelays)
 {
 	int ret = 0;
 
@@ -109,6 +197,11 @@ void __recalibrate_iodelay(struct pad_conf_entry const *pad, int npads)
 	/* Configure Mux settings */
 	do_set_mux32((*ctrl)->control_padconf_core_base, pad, npads);
 
+	/* Configure Manual IO timing modes */
+	ret = do_set_iodelay((*ctrl)->iodelay_config_base, iodelay, niodelays);
+	if (ret)
+		goto err;
+
 	ret = isolate_io(DEISOLATE_IO);
 
 err:
@@ -133,6 +226,12 @@ err:
 	case ERR_DEISOLATE_IO:
 		puts("IODELAY: De-isolation of Device IOs failed\n");
 		break;
+	case ERR_CPDE:
+		puts("IODELAY: CPDE calculation failed\n");
+		break;
+	case ERR_FPDE:
+		puts("IODELAY: FPDE calculation failed\n");
+		break;
 	default:
 		debug("IODELAY: IO delay recalibration successfully completed\n");
 	}