summaryrefslogtreecommitdiff
path: root/README
diff options
context:
space:
mode:
authorHolger Freyther <holger@freyther.de>2014-08-04 09:26:05 +0200
committerTom Rini <trini@ti.com>2014-08-06 09:02:46 -0400
commitab584d67c5a7c2349685274a711b579c28d5aaaf (patch)
treef15db9a279013cbfa4f587e9d02cf3a1096ca044 /README
parentbfca6e0809d62c034681bc19ed028e322f9a0aea (diff)
downloadu-boot-imx-ab584d67c5a7c2349685274a711b579c28d5aaaf.zip
u-boot-imx-ab584d67c5a7c2349685274a711b579c28d5aaaf.tar.gz
u-boot-imx-ab584d67c5a7c2349685274a711b579c28d5aaaf.tar.bz2
The _config target is not present anymore, mention _defconfig instead
The _config part is gone for sure, the _defconfig target could at least work. I have not verified this for all targets though.
Diffstat (limited to 'README')
-rw-r--r--README22
1 files changed, 11 insertions, 11 deletions
diff --git a/README b/README
index 0d295a7..1d71359 100644
--- a/README
+++ b/README
@@ -252,15 +252,15 @@ Selection of Processor Architecture and Board Type:
---------------------------------------------------
For all supported boards there are ready-to-use default
-configurations available; just type "make <board_name>_config".
+configurations available; just type "make <board_name>_defconfig".
Example: For a TQM823L module type:
cd u-boot
- make TQM823L_config
+ make TQM823L_defconfig
For the Cogent platform, you need to specify the CPU type as well;
-e.g. "make cogent_mpc8xx_config". And also configure the cogent
+e.g. "make cogent_mpc8xx_defconfig". And also configure the cogent
directory according to the instructions in cogent/README.
@@ -4847,9 +4847,9 @@ U-Boot is intended to be simple to build. After installing the
sources you must configure U-Boot for one specific board type. This
is done by typing:
- make NAME_config
+ make NAME_defconfig
-where "NAME_config" is the name of one of the existing configu-
+where "NAME_defconfig" is the name of one of the existing configu-
rations; see boards.cfg for supported names.
Note: for some board special configuration names may exist; check if
@@ -4858,10 +4858,10 @@ Note: for some board special configuration names may exist; check if
or with LCD support. You can select such additional "features"
when choosing the configuration, i. e.
- make TQM823L_config
+ make TQM823L_defconfig
- will configure for a plain TQM823L, i. e. no LCD support
- make TQM823L_LCD_config
+ make TQM823L_LCD_defconfig
- will configure for a TQM823L with U-Boot console on LCD
etc.
@@ -4881,14 +4881,14 @@ this behavior and build U-Boot to some external directory:
1. Add O= to the make command line invocations:
make O=/tmp/build distclean
- make O=/tmp/build NAME_config
+ make O=/tmp/build NAME_defconfig
make O=/tmp/build all
2. Set environment variable BUILD_DIR to point to the desired location:
export BUILD_DIR=/tmp/build
make distclean
- make NAME_config
+ make NAME_defconfig
make all
Note that the command line "O=" setting overrides the BUILD_DIR environment
@@ -4914,7 +4914,7 @@ steps:
your board
3. If you're porting U-Boot to a new CPU, then also create a new
directory to hold your CPU specific code. Add any files you need.
-4. Run "make <board>_config" with your new name.
+4. Run "make <board>_defconfig" with your new name.
5. Type "make", and you should get a working "u-boot.srec" file
to be installed on your target system.
6. Debug and solve any problems that might arise.
@@ -5494,7 +5494,7 @@ which was introduced for our predecessor project PPCBoot and uses a
Example:
- make TQM850L_config
+ make TQM850L_defconfig
make oldconfig
make dep
make uImage