summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2015-04-20 09:31:27 +0200
committerLuka Perkov <luka.perkov@sartura.hr>2015-07-23 10:38:14 +0200
commitedb470253346f4a882ba9e891c8b102ce388b9cc (patch)
tree339a9b773b85f6f6780bcc75853838ca488f702d
parent29b103c733f6c17ecf8ee8d66140254788e2bdda (diff)
downloadu-boot-imx-edb470253346f4a882ba9e891c8b102ce388b9cc.zip
u-boot-imx-edb470253346f4a882ba9e891c8b102ce388b9cc.tar.gz
u-boot-imx-edb470253346f4a882ba9e891c8b102ce388b9cc.tar.bz2
arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr
This code is ported from the Marvell bin_hdr code into mainline SPL U-Boot. It needs to be executed very early so that the devices connected to the serdes PHY are configured correctly. Signed-off-by: Stefan Roese <sr@denx.de>
-rw-r--r--arch/arm/mach-mvebu/Makefile1
-rw-r--r--arch/arm/mach-mvebu/serdes/a38x/Makefile10
-rw-r--r--arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c347
-rw-r--r--arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h82
-rw-r--r--arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c158
-rw-r--r--arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c2228
-rw-r--r--arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h251
-rw-r--r--arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec-38x.c1009
-rw-r--r--arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec.h124
-rw-r--r--arch/arm/mach-mvebu/serdes/a38x/seq_exec.c170
-rw-r--r--arch/arm/mach-mvebu/serdes/a38x/seq_exec.h65
-rw-r--r--arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c388
-rw-r--r--arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h371
13 files changed, 5204 insertions, 0 deletions
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 9cdbefd..446ce04 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -20,6 +20,7 @@ obj-y += timer.o
obj-$(CONFIG_SPL_BUILD) += spl.o
obj-$(CONFIG_SPL_BUILD) += lowlevel_spl.o
+obj-$(CONFIG_SYS_MVEBU_DDR_A38X) += serdes/a38x/
obj-$(CONFIG_SYS_MVEBU_DDR_AXP) += serdes/axp/
endif
diff --git a/arch/arm/mach-mvebu/serdes/a38x/Makefile b/arch/arm/mach-mvebu/serdes/a38x/Makefile
new file mode 100644
index 0000000..1503da8
--- /dev/null
+++ b/arch/arm/mach-mvebu/serdes/a38x/Makefile
@@ -0,0 +1,10 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-$(CONFIG_SPL_BUILD) = ctrl_pex.o
+obj-$(CONFIG_SPL_BUILD) += high_speed_env_spec.o
+obj-$(CONFIG_SPL_BUILD) += high_speed_env_spec-38x.o
+obj-$(CONFIG_SPL_BUILD) += high_speed_topology_spec-38x.o
+obj-$(CONFIG_SPL_BUILD) += seq_exec.o
+obj-$(CONFIG_SPL_BUILD) += sys_env_lib.o
diff --git a/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c
new file mode 100644
index 0000000..5f223f9
--- /dev/null
+++ b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.c
@@ -0,0 +1,347 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+#include "ctrl_pex.h"
+#include "sys_env_lib.h"
+
+int hws_pex_config(struct serdes_map *serdes_map)
+{
+ u32 pex_idx, tmp, next_busno, first_busno, temp_pex_reg,
+ temp_reg, addr, dev_id, ctrl_mode;
+ enum serdes_type serdes_type;
+ u32 idx, max_lane_num;
+
+ DEBUG_INIT_FULL_S("\n### hws_pex_config ###\n");
+
+ max_lane_num = hws_serdes_get_max_lane();
+ for (idx = 0; idx < max_lane_num; idx++) {
+ serdes_type = serdes_map[idx].serdes_type;
+ /* configuration for PEX only */
+ if ((serdes_type != PEX0) && (serdes_type != PEX1) &&
+ (serdes_type != PEX2) && (serdes_type != PEX3))
+ continue;
+
+ if ((serdes_type != PEX0) &&
+ ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) ||
+ (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) {
+ /* for PEX by4 - relevant for the first port only */
+ continue;
+ }
+
+ pex_idx = serdes_type - PEX0;
+ tmp = reg_read(PEX_CAPABILITIES_REG(pex_idx));
+ tmp &= ~(0xf << 20);
+ tmp |= (0x4 << 20);
+ reg_write(PEX_CAPABILITIES_REG(pex_idx), tmp);
+ }
+
+ tmp = reg_read(SOC_CTRL_REG);
+ tmp &= ~0x03;
+
+ for (idx = 0; idx < max_lane_num; idx++) {
+ serdes_type = serdes_map[idx].serdes_type;
+ if ((serdes_type != PEX0) &&
+ ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) ||
+ (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) {
+ /* for PEX by4 - relevant for the first port only */
+ continue;
+ }
+
+ switch (serdes_type) {
+ case PEX0:
+ tmp |= 0x1 << PCIE0_ENABLE_OFFS;
+ break;
+ case PEX1:
+ tmp |= 0x1 << PCIE1_ENABLE_OFFS;
+ break;
+ case PEX2:
+ tmp |= 0x1 << PCIE2_ENABLE_OFFS;
+ break;
+ case PEX3:
+ tmp |= 0x1 << PCIE3_ENABLE_OFFS;
+ break;
+ default:
+ break;
+ }
+ }
+
+ reg_write(SOC_CTRL_REG, tmp);
+
+ /* Support gen1/gen2 */
+ DEBUG_INIT_FULL_S("Support gen1/gen2\n");
+ next_busno = 0;
+ mdelay(150);
+
+ for (idx = 0; idx < max_lane_num; idx++) {
+ serdes_type = serdes_map[idx].serdes_type;
+ DEBUG_INIT_FULL_S(" serdes_type=0x");
+ DEBUG_INIT_FULL_D(serdes_type, 8);
+ DEBUG_INIT_FULL_S("\n");
+ DEBUG_INIT_FULL_S(" idx=0x");
+ DEBUG_INIT_FULL_D(idx, 8);
+ DEBUG_INIT_FULL_S("\n");
+
+ /* Configuration for PEX only */
+ if ((serdes_type != PEX0) && (serdes_type != PEX1) &&
+ (serdes_type != PEX2) && (serdes_type != PEX3))
+ continue;
+
+ if ((serdes_type != PEX0) &&
+ ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) ||
+ (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) {
+ /* for PEX by4 - relevant for the first port only */
+ continue;
+ }
+
+ pex_idx = serdes_type - PEX0;
+ tmp = reg_read(PEX_DBG_STATUS_REG(pex_idx));
+
+ first_busno = next_busno;
+ if ((tmp & 0x7f) != 0x7e) {
+ DEBUG_INIT_S("PCIe, Idx ");
+ DEBUG_INIT_D(pex_idx, 1);
+ DEBUG_INIT_S(": detected no link\n");
+ continue;
+ }
+
+ next_busno++;
+ temp_pex_reg = reg_read((PEX_CFG_DIRECT_ACCESS
+ (pex_idx, PEX_LINK_CAPABILITY_REG)));
+ temp_pex_reg &= 0xf;
+ if (temp_pex_reg != 0x2)
+ continue;
+
+ temp_reg = (reg_read(PEX_CFG_DIRECT_ACCESS(
+ pex_idx,
+ PEX_LINK_CTRL_STAT_REG)) &
+ 0xf0000) >> 16;
+
+ /* Check if the link established is GEN1 */
+ DEBUG_INIT_FULL_S
+ ("Checking if the link established is gen1\n");
+ if (temp_reg != 0x1)
+ continue;
+
+ pex_local_bus_num_set(pex_idx, first_busno);
+ pex_local_dev_num_set(pex_idx, 1);
+ DEBUG_INIT_FULL_S("PCIe, Idx ");
+ DEBUG_INIT_FULL_D(pex_idx, 1);
+
+ DEBUG_INIT_S(":** Link is Gen1, check the EP capability\n");
+ /* link is Gen1, check the EP capability */
+ addr = pex_config_read(pex_idx, first_busno, 0, 0, 0x34) & 0xff;
+ DEBUG_INIT_FULL_C("pex_config_read: return addr=0x%x", addr, 4);
+ if (addr == 0xff) {
+ DEBUG_INIT_FULL_C
+ ("pex_config_read: return 0xff -->PCIe (%d): Detected No Link.",
+ pex_idx, 1);
+ continue;
+ }
+
+ while ((pex_config_read(pex_idx, first_busno, 0, 0, addr)
+ & 0xff) != 0x10) {
+ addr = (pex_config_read(pex_idx, first_busno, 0,
+ 0, addr) & 0xff00) >> 8;
+ }
+
+ /* Check for Gen2 and above */
+ if ((pex_config_read(pex_idx, first_busno, 0, 0,
+ addr + 0xc) & 0xf) < 0x2) {
+ DEBUG_INIT_S("PCIe, Idx ");
+ DEBUG_INIT_D(pex_idx, 1);
+ DEBUG_INIT_S(": remains Gen1\n");
+ continue;
+ }
+
+ tmp = reg_read(PEX_LINK_CTRL_STATUS2_REG(pex_idx));
+ DEBUG_RD_REG(PEX_LINK_CTRL_STATUS2_REG(pex_idx), tmp);
+ tmp &= ~(BIT(0) | BIT(1));
+ tmp |= BIT(1);
+ tmp |= BIT(6); /* Select Deemphasize (-3.5d_b) */
+ reg_write(PEX_LINK_CTRL_STATUS2_REG(pex_idx), tmp);
+ DEBUG_WR_REG(PEX_LINK_CTRL_STATUS2_REG(pex_idx), tmp);
+
+ tmp = reg_read(PEX_CTRL_REG(pex_idx));
+ DEBUG_RD_REG(PEX_CTRL_REG(pex_idx), tmp);
+ tmp |= BIT(10);
+ reg_write(PEX_CTRL_REG(pex_idx), tmp);
+ DEBUG_WR_REG(PEX_CTRL_REG(pex_idx), tmp);
+
+ /*
+ * We need to wait 10ms before reading the PEX_DBG_STATUS_REG
+ * in order not to read the status of the former state
+ */
+ mdelay(10);
+
+ DEBUG_INIT_S("PCIe, Idx ");
+ DEBUG_INIT_D(pex_idx, 1);
+ DEBUG_INIT_S
+ (": Link upgraded to Gen2 based on client cpabilities\n");
+ }
+
+ /* Update pex DEVICE ID */
+ ctrl_mode = sys_env_model_get();
+
+ for (idx = 0; idx < max_lane_num; idx++) {
+ serdes_type = serdes_map[idx].serdes_type;
+ /* configuration for PEX only */
+ if ((serdes_type != PEX0) && (serdes_type != PEX1) &&
+ (serdes_type != PEX2) && (serdes_type != PEX3))
+ continue;
+
+ if ((serdes_type != PEX0) &&
+ ((serdes_map[idx].serdes_mode == PEX_ROOT_COMPLEX_X4) ||
+ (serdes_map[idx].serdes_mode == PEX_END_POINT_X4))) {
+ /* for PEX by4 - relevant for the first port only */
+ continue;
+ }
+
+ pex_idx = serdes_type - PEX0;
+ dev_id = reg_read(PEX_CFG_DIRECT_ACCESS
+ (pex_idx, PEX_DEVICE_AND_VENDOR_ID));
+ dev_id &= 0xffff;
+ dev_id |= ((ctrl_mode << 16) & 0xffff0000);
+ reg_write(PEX_CFG_DIRECT_ACCESS
+ (pex_idx, PEX_DEVICE_AND_VENDOR_ID), dev_id);
+ }
+ DEBUG_INIT_FULL_C("Update PEX Device ID ", ctrl_mode, 4);
+
+ return MV_OK;
+}
+
+int pex_local_bus_num_set(u32 pex_if, u32 bus_num)
+{
+ u32 pex_status;
+
+ DEBUG_INIT_FULL_S("\n### pex_local_bus_num_set ###\n");
+
+ if (bus_num >= MAX_PEX_BUSSES) {
+ DEBUG_INIT_C("pex_local_bus_num_set: Illegal bus number %d\n",
+ bus_num, 4);
+ return MV_BAD_PARAM;
+ }
+
+ pex_status = reg_read(PEX_STATUS_REG(pex_if));
+ pex_status &= ~PXSR_PEX_BUS_NUM_MASK;
+ pex_status |=
+ (bus_num << PXSR_PEX_BUS_NUM_OFFS) & PXSR_PEX_BUS_NUM_MASK;
+ reg_write(PEX_STATUS_REG(pex_if), pex_status);
+
+ return MV_OK;
+}
+
+int pex_local_dev_num_set(u32 pex_if, u32 dev_num)
+{
+ u32 pex_status;
+
+ DEBUG_INIT_FULL_S("\n### pex_local_dev_num_set ###\n");
+
+ pex_status = reg_read(PEX_STATUS_REG(pex_if));
+ pex_status &= ~PXSR_PEX_DEV_NUM_MASK;
+ pex_status |=
+ (dev_num << PXSR_PEX_DEV_NUM_OFFS) & PXSR_PEX_DEV_NUM_MASK;
+ reg_write(PEX_STATUS_REG(pex_if), pex_status);
+
+ return MV_OK;
+}
+
+/*
+ * pex_config_read - Read from configuration space
+ *
+ * DESCRIPTION:
+ * This function performs a 32 bit read from PEX configuration space.
+ * It supports both type 0 and type 1 of Configuration Transactions
+ * (local and over bridge). In order to read from local bus segment, use
+ * bus number retrieved from pex_local_bus_num_get(). Other bus numbers
+ * will result configuration transaction of type 1 (over bridge).
+ *
+ * INPUT:
+ * pex_if - PEX interface number.
+ * bus - PEX segment bus number.
+ * dev - PEX device number.
+ * func - Function number.
+ * reg_offs - Register offset.
+ *
+ * OUTPUT:
+ * None.
+ *
+ * RETURN:
+ * 32bit register data, 0xffffffff on error
+ */
+u32 pex_config_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 reg_off)
+{
+ u32 pex_data = 0;
+ u32 local_dev, local_bus;
+ u32 pex_status;
+
+ pex_status = reg_read(PEX_STATUS_REG(pex_if));
+ local_dev =
+ ((pex_status & PXSR_PEX_DEV_NUM_MASK) >> PXSR_PEX_DEV_NUM_OFFS);
+ local_bus =
+ ((pex_status & PXSR_PEX_BUS_NUM_MASK) >> PXSR_PEX_BUS_NUM_OFFS);
+
+ /*
+ * In PCI Express we have only one device number
+ * and this number is the first number we encounter
+ * else that the local_dev
+ * spec pex define return on config read/write on any device
+ */
+ if (bus == local_bus) {
+ if (local_dev == 0) {
+ /*
+ * if local dev is 0 then the first number we encounter
+ * after 0 is 1
+ */
+ if ((dev != 1) && (dev != local_dev))
+ return MV_ERROR;
+ } else {
+ /*
+ * if local dev is not 0 then the first number we
+ * encounter is 0
+ */
+ if ((dev != 0) && (dev != local_dev))
+ return MV_ERROR;
+ }
+ }
+
+ /* Creating PEX address to be passed */
+ pex_data = (bus << PXCAR_BUS_NUM_OFFS);
+ pex_data |= (dev << PXCAR_DEVICE_NUM_OFFS);
+ pex_data |= (func << PXCAR_FUNC_NUM_OFFS);
+ /* Legacy register space */
+ pex_data |= (reg_off & PXCAR_REG_NUM_MASK);
+ /* Extended register space */
+ pex_data |= (((reg_off & PXCAR_REAL_EXT_REG_NUM_MASK) >>
+ PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS);
+ pex_data |= PXCAR_CONFIG_EN;
+
+ /* Write the address to the PEX configuration address register */
+ reg_write(PEX_CFG_ADDR_REG(pex_if), pex_data);
+
+ /*
+ * In order to let the PEX controller absorbed the address
+ * of the read transaction we perform a validity check that
+ * the address was written
+ */
+ if (pex_data != reg_read(PEX_CFG_ADDR_REG(pex_if)))
+ return MV_ERROR;
+
+ /* Cleaning Master Abort */
+ reg_bit_set(PEX_CFG_DIRECT_ACCESS(pex_if, PEX_STATUS_AND_COMMAND),
+ PXSAC_MABORT);
+ /* Read the Data returned in the PEX Data register */
+ pex_data = reg_read(PEX_CFG_DATA_REG(pex_if));
+
+ DEBUG_INIT_FULL_C(" --> ", pex_data, 4);
+
+ return pex_data;
+}
diff --git a/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h
new file mode 100644
index 0000000..5032759
--- /dev/null
+++ b/arch/arm/mach-mvebu/serdes/a38x/ctrl_pex.h
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _CTRL_PEX_H
+#define _CTRL_PEX_H
+
+#include "high_speed_env_spec.h"
+
+/* Sample at Reset */
+#define MPP_SAMPLE_AT_RESET(id) (0xe4200 + (id * 4))
+
+/* PCI Express Control and Status Registers */
+#define MAX_PEX_BUSSES 256
+
+#define MISC_REGS_OFFSET 0x18200
+#define MV_MISC_REGS_BASE MISC_REGS_OFFSET
+#define SOC_CTRL_REG (MV_MISC_REGS_BASE + 0x4)
+
+#define PEX_CAPABILITIES_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x60)
+#define PEX_LINK_CTRL_STATUS2_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x90)
+#define PEX_CTRL_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x1a00)
+#define PEX_STATUS_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x1a04)
+#define PEX_DBG_STATUS_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x1a64)
+#define PEX_LINK_CAPABILITY_REG 0x6c
+#define PEX_LINK_CTRL_STAT_REG 0x70
+#define PXSR_PEX_DEV_NUM_OFFS 16 /* Device Number Indication */
+#define PXSR_PEX_DEV_NUM_MASK (0x1f << PXSR_PEX_DEV_NUM_OFFS)
+#define PXSR_PEX_BUS_NUM_OFFS 8 /* Bus Number Indication */
+#define PXSR_PEX_BUS_NUM_MASK (0xff << PXSR_PEX_BUS_NUM_OFFS)
+
+/* PEX_CAPABILITIES_REG fields */
+#define PCIE0_ENABLE_OFFS 0
+#define PCIE0_ENABLE_MASK (0x1 << PCIE0_ENABLE_OFFS)
+#define PCIE1_ENABLE_OFFS 1
+#define PCIE1_ENABLE_MASK (0x1 << PCIE1_ENABLE_OFFS)
+#define PCIE2_ENABLE_OFFS 2
+#define PCIE2_ENABLE_MASK (0x1 << PCIE2_ENABLE_OFFS)
+#define PCIE3_ENABLE_OFFS 3
+#define PCIE4_ENABLE_MASK (0x1 << PCIE3_ENABLE_OFFS)
+
+/* Controller revision info */
+#define PEX_DEVICE_AND_VENDOR_ID 0x000
+
+/* PCI Express Configuration Address Register */
+#define PXCAR_REG_NUM_OFFS 2
+#define PXCAR_REG_NUM_MAX 0x3f
+#define PXCAR_REG_NUM_MASK (PXCAR_REG_NUM_MAX << \
+ PXCAR_REG_NUM_OFFS)
+#define PXCAR_FUNC_NUM_OFFS 8
+#define PXCAR_FUNC_NUM_MAX 0x7
+#define PXCAR_FUNC_NUM_MASK (PXCAR_FUNC_NUM_MAX << \
+ PXCAR_FUNC_NUM_OFFS)
+#define PXCAR_DEVICE_NUM_OFFS 11
+#define PXCAR_DEVICE_NUM_MAX 0x1f
+#define PXCAR_DEVICE_NUM_MASK (PXCAR_DEVICE_NUM_MAX << \
+ PXCAR_DEVICE_NUM_OFFS)
+#define PXCAR_BUS_NUM_OFFS 16
+#define PXCAR_BUS_NUM_MAX 0xff
+#define PXCAR_BUS_NUM_MASK (PXCAR_BUS_NUM_MAX << \
+ PXCAR_BUS_NUM_OFFS)
+#define PXCAR_EXT_REG_NUM_OFFS 24
+#define PXCAR_EXT_REG_NUM_MAX 0xf
+
+#define PEX_CFG_ADDR_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x18f8)
+#define PEX_CFG_DATA_REG(if) ((PEX_IF_REGS_BASE(if)) + 0x18fc)
+
+#define PXCAR_REAL_EXT_REG_NUM_OFFS 8
+#define PXCAR_REAL_EXT_REG_NUM_MASK (0xf << PXCAR_REAL_EXT_REG_NUM_OFFS)
+
+#define PXCAR_CONFIG_EN BIT(31)
+#define PEX_STATUS_AND_COMMAND 0x004
+#define PXSAC_MABORT BIT(29) /* Recieved Master Abort */
+
+int hws_pex_config(struct serdes_map *serdes_map);
+int pex_local_bus_num_set(u32 pex_if, u32 bus_num);
+int pex_local_dev_num_set(u32 pex_if, u32 dev_num);
+u32 pex_config_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 reg_off);
+
+#endif
diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c
new file mode 100644
index 0000000..5ff8567
--- /dev/null
+++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec-38x.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+#include "high_speed_env_spec.h"
+#include "sys_env_lib.h"
+
+#define SERDES_VERION "2.0"
+
+u8 selectors_serdes_rev1_map[LAST_SERDES_TYPE][MAX_SERDES_LANES] = {
+ /* 0 1 2 3 4 5 */
+ {0x1, 0x1, NA, NA, NA, NA}, /* PEX0 */
+ {NA, 0x2, 0x1, NA, 0x1, NA}, /* PEX1 */
+ {NA, NA, 0x2, NA, NA, 0x1}, /* PEX2 */
+ {NA, NA, NA, 0x1, NA, NA}, /* PEX3 */
+ {0x2, 0x3, NA, NA, NA, NA}, /* SATA0 */
+ {NA, NA, 0x3, NA, 0x2, NA}, /* SATA1 */
+ {NA, NA, NA, NA, 0x6, 0x2}, /* SATA2 */
+ {NA, NA, NA, 0x3, NA, NA}, /* SATA3 */
+ {0x3, 0x4, NA, NA, NA, NA}, /* SGMII0 */
+ {NA, 0x5, 0x4, NA, 0x3, NA}, /* SGMII1 */
+ {NA, NA, NA, 0x4, NA, 0x3}, /* SGMII2 */
+ {NA, 0x7, NA, NA, NA, NA}, /* QSGMII */
+ {NA, 0x6, NA, NA, 0x4, NA}, /* USB3_HOST0 */
+ {NA, NA, NA, 0x5, NA, 0x4}, /* USB3_HOST1 */
+ {NA, NA, NA, 0x6, 0x5, 0x5}, /* USB3_DEVICE */
+ {0x0, 0x0, 0x0, 0x0, 0x0, 0x0} /* DEFAULT_SERDES */
+};
+
+int hws_serdes_seq_init(void)
+{
+ DEBUG_INIT_FULL_S("\n### serdes_seq_init ###\n");
+
+ if (hws_serdes_seq_db_init() != MV_OK) {
+ printf("hws_serdes_seq_init: Error: Serdes initialization fail\n");
+ return MV_FAIL;
+ }
+
+ return MV_OK;
+}
+
+int serdes_power_up_ctrl_ext(u32 serdes_num, int serdes_power_up,
+ enum serdes_type serdes_type,
+ enum serdes_speed baud_rate,
+ enum serdes_mode serdes_mode,
+ enum ref_clock ref_clock)
+{
+ return MV_NOT_SUPPORTED;
+}
+
+u32 hws_serdes_silicon_ref_clock_get(void)
+{
+ DEBUG_INIT_FULL_S("\n### hws_serdes_silicon_ref_clock_get ###\n");
+
+ return REF_CLOCK_25MHZ;
+}
+
+u32 hws_serdes_get_max_lane(void)
+{
+ switch (sys_env_device_id_get()) {
+ case MV_6811: /* A381/A3282: 6811/6821: single/dual cpu */
+ return 4;
+ case MV_6810:
+ return 5;
+ case MV_6820:
+ case MV_6828:
+ return 6;
+ default: /* not the right module */
+ printf("%s: Device ID Error, using 4 SerDes lanes\n",
+ __func__);
+ return 4;
+ }
+ return 6;
+}
+
+int hws_is_serdes_active(u8 lane_num)
+{
+ int ret = 1;
+
+ /* Maximum lane count for A388 (6828) is 6 */
+ if (lane_num > 6)
+ ret = 0;
+
+ /* 4th Lane (#4 on Device 6810 is not Active */
+ if (sys_env_device_id_get() == MV_6810 && lane_num == 4) {
+ printf("%s: Error: Lane#4 on Device 6810 is not Active.\n",
+ __func__);
+ return 0;
+ }
+
+ /*
+ * 6th Lane (#5) on Device 6810 is Active, even though 6810
+ * has only 5 lanes
+ */
+ if (sys_env_device_id_get() == MV_6810 && lane_num == 5)
+ return 1;
+
+ if (lane_num >= hws_serdes_get_max_lane())
+ ret = 0;
+
+ return ret;
+}
+
+int hws_get_ext_base_addr(u32 serdes_num, u32 base_addr, u32 unit_base_offset,
+ u32 *unit_base_reg, u32 *unit_offset)
+{
+ *unit_base_reg = base_addr;
+ *unit_offset = unit_base_offset;
+
+ return MV_OK;
+}
+
+/*
+ * hws_serdes_get_phy_selector_val
+ *
+ * DESCRIPTION: Get the mapping of Serdes Selector values according to the
+ * Serdes revision number
+ * INPUT: serdes_num - Serdes number
+ * serdes_type - Serdes type
+ * OUTPUT: None
+ * RETURN:
+ * Mapping of Serdes Selector values
+ */
+u32 hws_serdes_get_phy_selector_val(int serdes_num,
+ enum serdes_type serdes_type)
+{
+ if (serdes_type >= LAST_SERDES_TYPE)
+ return 0xff;
+
+ if (hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2) {
+ return selectors_serdes_rev1_map
+ [serdes_type][serdes_num];
+ } else
+ return selectors_serdes_rev2_map
+ [serdes_type][serdes_num];
+}
+
+u32 hws_get_physical_serdes_num(u32 serdes_num)
+{
+ if ((serdes_num == 4) && (sys_env_device_id_get() == MV_6810)) {
+ /*
+ * For 6810, there are 5 Serdes and Serdes Num 4 doesn't
+ * exist. Instead Serdes Num 5 is connected.
+ */
+ return 5;
+ } else {
+ return serdes_num;
+ }
+}
diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
new file mode 100644
index 0000000..23af769
--- /dev/null
+++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
@@ -0,0 +1,2228 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+#include "high_speed_env_spec.h"
+#include "high_speed_topology_spec.h"
+#include "sys_env_lib.h"
+#include "ctrl_pex.h"
+
+#if defined(CONFIG_ARMADA_38X)
+#elif defined(CONFIG_ARMADA_39X)
+#else
+#error "No device is defined"
+#endif
+
+/*
+ * The board topology map, initialized in the beginning of
+ * ctrl_high_speed_serdes_phy_config
+ */
+struct serdes_map serdes_configuration_map[MAX_SERDES_LANES];
+
+/*
+ * serdes_seq_db - holds all serdes sequences, their size and the
+ * relevant index in the data array initialized in serdes_seq_init
+ */
+struct cfg_seq serdes_seq_db[SERDES_LAST_SEQ];
+
+#define SERDES_VERION "2.0"
+#define ENDED_OK "High speed PHY - Ended Successfully\n"
+
+#define LINK_WAIT_CNTR 100
+#define LINK_WAIT_SLEEP 100
+
+#define MAX_UNIT_NUMB 4
+#define TOPOLOGY_TEST_OK 0
+#define WRONG_NUMBER_OF_UNITS 1
+#define SERDES_ALREADY_IN_USE 2
+#define UNIT_NUMBER_VIOLATION 3
+
+/*
+ * serdes_lane_in_use_count contains the exact amount of serdes lanes
+ * needed per type
+ */
+u8 serdes_lane_in_use_count[MAX_UNITS_ID][MAX_UNIT_NUMB] = {
+ /* 0 1 2 3 */
+ { 1, 1, 1, 1 }, /* PEX */
+ { 1, 1, 1, 1 }, /* ETH_GIG */
+ { 1, 1, 0, 0 }, /* USB3H */
+ { 1, 1, 1, 0 }, /* USB3D */
+ { 1, 1, 1, 1 }, /* SATA */
+ { 1, 0, 0, 0 }, /* QSGMII */
+ { 4, 0, 0, 0 }, /* XAUI */
+ { 2, 0, 0, 0 } /* RXAUI */
+};
+
+/*
+ * serdes_unit_count count unit number.
+ * (i.e a single XAUI is counted as 1 unit)
+ */
+u8 serdes_unit_count[MAX_UNITS_ID] = { 0 };
+
+/* Selector mapping for A380-A0 and A390-Z1 */
+u8 selectors_serdes_rev2_map[LAST_SERDES_TYPE][MAX_SERDES_LANES] = {
+ /* 0 1 2 3 4 5 6 */
+ { 0x1, 0x1, NA, NA, NA, NA, NA }, /* PEX0 */
+ { NA, NA, 0x1, NA, 0x1, NA, 0x1 }, /* PEX1 */
+ { NA, NA, NA, NA, 0x7, 0x1, NA }, /* PEX2 */
+ { NA, NA, NA, 0x1, NA, NA, NA }, /* PEX3 */
+ { 0x2, 0x3, NA, NA, NA, NA, NA }, /* SATA0 */
+ { NA, NA, 0x3, NA, NA, NA, NA }, /* SATA1 */
+ { NA, NA, NA, NA, 0x6, 0x2, NA }, /* SATA2 */
+ { NA, NA, NA, 0x3, NA, NA, NA }, /* SATA3 */
+ { 0x3, 0x4, NA, NA, NA, NA, NA }, /* SGMII0 */
+ { NA, 0x5, 0x4, NA, 0x3, NA, NA }, /* SGMII1 */
+ { NA, NA, NA, 0x4, NA, 0x3, NA }, /* SGMII2 */
+ { NA, 0x7, NA, NA, NA, NA, NA }, /* QSGMII */
+ { NA, 0x6, NA, NA, 0x4, NA, NA }, /* USB3_HOST0 */
+ { NA, NA, NA, 0x5, NA, 0x4, NA }, /* USB3_HOST1 */
+ { NA, NA, NA, 0x6, 0x5, 0x5, NA }, /* USB3_DEVICE */
+#ifdef CONFIG_ARMADA_39X
+ { NA, NA, 0x5, NA, 0x8, NA, 0x2 }, /* SGMII3 */
+ { NA, NA, NA, 0x8, 0x9, 0x8, 0x4 }, /* XAUI */
+ { NA, NA, NA, NA, NA, 0x8, 0x4 }, /* RXAUI */
+#endif
+ { 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, NA } /* DEFAULT_SERDES */
+};
+
+/* Selector mapping for PEX by 4 confiuration */
+u8 common_phys_selectors_pex_by4_lanes[] = { 0x1, 0x2, 0x2, 0x2 };
+
+static const char *const serdes_type_to_string[] = {
+ "PCIe0",
+ "PCIe1",
+ "PCIe2",
+ "PCIe3",
+ "SATA0",
+ "SATA1",
+ "SATA2",
+ "SATA3",
+ "SGMII0",
+ "SGMII1",
+ "SGMII2",
+ "QSGMII",
+ "USB3 HOST0",
+ "USB3 HOST1",
+ "USB3 DEVICE",
+ "SGMII3",
+ "XAUI",
+ "RXAUI",
+ "DEFAULT SERDES",
+ "LAST_SERDES_TYPE"
+};
+
+struct serdes_unit_data {
+ u8 serdes_unit_id;
+ u8 serdes_unit_num;
+};
+
+static struct serdes_unit_data serdes_type_to_unit_info[] = {
+ {PEX_UNIT_ID, 0,},
+ {PEX_UNIT_ID, 1,},
+ {PEX_UNIT_ID, 2,},
+ {PEX_UNIT_ID, 3,},
+ {SATA_UNIT_ID, 0,},
+ {SATA_UNIT_ID, 1,},
+ {SATA_UNIT_ID, 2,},
+ {SATA_UNIT_ID, 3,},
+ {ETH_GIG_UNIT_ID, 0,},
+ {ETH_GIG_UNIT_ID, 1,},
+ {ETH_GIG_UNIT_ID, 2,},
+ {QSGMII_UNIT_ID, 0,},
+ {USB3H_UNIT_ID, 0,},
+ {USB3H_UNIT_ID, 1,},
+ {USB3D_UNIT_ID, 0,},
+ {ETH_GIG_UNIT_ID, 3,},
+ {XAUI_UNIT_ID, 0,},
+ {RXAUI_UNIT_ID, 0,},
+};
+
+/* Sequences DB */
+
+/*
+ * SATA and SGMII
+ */
+
+struct op_params sata_port0_power_up_params[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, SATA data, wait_time,
+ * num_of_loops
+ */
+ /* Access to reg 0x48(OOB param 1) */
+ {SATA_VENDOR_PORT_0_REG_ADDR, 0x38000, 0xffffffff, {0x48,}, 0, 0},
+ /* OOB Com_wake and Com_reset spacing upper limit data */
+ {SATA_VENDOR_PORT_0_REG_DATA, 0x38000, 0xf03f, {0x6018,}, 0, 0},
+ /* Access to reg 0xa(PHY Control) */
+ {SATA_VENDOR_PORT_0_REG_ADDR, 0x38000, 0xffffffff, {0xa,}, 0, 0},
+ /* Rx clk and Tx clk select non-inverted mode */
+ {SATA_VENDOR_PORT_0_REG_DATA, 0x38000, 0x3000, {0x0,}, 0, 0},
+ /* Power Down Sata addr */
+ {SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x0,}, 0, 0},
+ /* Power Down Sata Port 0 */
+ {SATA_CTRL_REG_IND_DATA, 0x38000, 0xffff00ff, {0xc40040,}, 0, 0},
+};
+
+struct op_params sata_port1_power_up_params[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, SATA data, wait_time,
+ * num_of_loops
+ */
+ /* Access to reg 0x48(OOB param 1) */
+ {SATA_VENDOR_PORT_1_REG_ADDR, 0x38000, 0xffffffff, {0x48,}, 0, 0},
+ /* OOB Com_wake and Com_reset spacing upper limit data */
+ {SATA_VENDOR_PORT_1_REG_DATA, 0x38000, 0xf03f, {0x6018,}, 0, 0},
+ /* Access to reg 0xa(PHY Control) */
+ {SATA_VENDOR_PORT_1_REG_ADDR, 0x38000, 0xffffffff, {0xa,}, 0, 0},
+ /* Rx clk and Tx clk select non-inverted mode */
+ {SATA_VENDOR_PORT_1_REG_DATA, 0x38000, 0x3000, {0x0,}, 0, 0},
+ /* Power Down Sata addr */
+ {SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x0,}, 0, 0},
+ /* Power Down Sata Port 1 */
+ {SATA_CTRL_REG_IND_DATA, 0x38000, 0xffffff00, {0xc44000,}, 0, 0},
+};
+
+/* SATA and SGMII - power up seq */
+struct op_params sata_and_sgmii_power_up_params[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, SATA data, SGMII data,
+ * wait_time, num_of_loops
+ */
+ /* Power Up */
+ {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x90006, {0x80002, 0x80002},
+ 0, 0},
+ /* Unreset */
+ {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x7800, {0x6000, 0x6000}, 0, 0},
+ /* Phy Selector */
+ {POWER_AND_PLL_CTRL_REG, 0x800, 0x0e0, {0x0, 0x80}, 0, 0},
+ /* Ref clock source select */
+ {MISC_REG, 0x800, 0x440, {0x440, 0x400}, 0, 0}
+};
+
+/* SATA and SGMII - speed config seq */
+struct op_params sata_and_sgmii_speed_config_params[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, SATA data,
+ * SGMII (1.25G), SGMII (3.125G), wait_time, num_of_loops
+ */
+ /* Baud Rate */
+ {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x3fc00000,
+ {0x8800000, 0x19800000, 0x22000000}, 0, 0},
+ /* Select Baud Rate for SATA only */
+ {INTERFACE_REG, 0x800, 0xc00, {0x800, NO_DATA, NO_DATA}, 0, 0},
+ /* Phy Gen RX and TX */
+ {ISOLATE_REG, 0x800, 0xff, {NO_DATA, 0x66, 0x66}, 0, 0},
+ /* Bus Width */
+ {LOOPBACK_REG, 0x800, 0xe, {0x4, 0x2, 0x2}, 0, 0}
+};
+
+/* SATA and SGMII - TX config seq */
+struct op_params sata_and_sgmii_tx_config_params1[] = {
+ /*
+ * unitunit_base_reg, unit_offset, mask, SATA data, SGMII data,
+ * wait_time, num_of_loops
+ */
+ {GLUE_REG, 0x800, 0x1800, {NO_DATA, 0x800}, 0, 0},
+ /* Sft Reset pulse */
+ {RESET_DFE_REG, 0x800, 0x401, {0x401, 0x401}, 0, 0},
+ /* Sft Reset pulse */
+ {RESET_DFE_REG, 0x800, 0x401, {0x0, 0x0}, 0, 0},
+ /* Power up PLL, RX and TX */
+ {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0xf0000, {0x70000, 0x70000},
+ 0, 0}
+};
+
+struct op_params sata_port0_tx_config_params[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, SATA data, wait_time,
+ * num_of_loops
+ */
+ /* Power Down Sata addr */
+ {SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x0}, 0, 0},
+ /* Power Down Sata Port 0 */
+ {SATA_CTRL_REG_IND_DATA, 0x38000, 0xffff00ff, {0xc40000}, 0, 0},
+ /* Regret bit addr */
+ {SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x4}, 0, 0},
+ /* Regret bit data */
+ {SATA_CTRL_REG_IND_DATA, 0x38000, 0xffffffff, {0x80}, 0, 0}
+};
+
+struct op_params sata_port1_tx_config_params[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, SATA data, wait_time,
+ * num_of_loops
+ */
+ /* Power Down Sata addr */
+ {SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x0}, 0, 0},
+ /* Power Down Sata Port 1 */
+ {SATA_CTRL_REG_IND_DATA, 0x38000, 0xffffff00, {0xc40000}, 0, 0},
+ /* Regret bit addr */
+ {SATA_CTRL_REG_IND_ADDR, 0x38000, 0xffffffff, {0x4}, 0, 0},
+ /* Regret bit data */
+ {SATA_CTRL_REG_IND_DATA, 0x38000, 0xffffffff, {0x80}, 0, 0}
+};
+
+struct op_params sata_and_sgmii_tx_config_serdes_rev1_params2[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, SATA data, SGMII data,
+ * wait_time, num_of_loops
+ */
+ /* Wait for PHY power up sequence to finish */
+ {COMMON_PHY_STATUS1_REG, 0x28, 0xc, {0xc, 0xc}, 10, 1000},
+ /* Wait for PHY power up sequence to finish */
+ {COMMON_PHY_STATUS1_REG, 0x28, 0x1, {0x1, 0x1}, 1, 1000}
+};
+
+struct op_params sata_and_sgmii_tx_config_serdes_rev2_params2[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, SATA data, SGMII data,
+ * wait_time, num_of_loops
+ */
+ /* Wait for PHY power up sequence to finish */
+ {COMMON_PHY_STATUS1_REG, 0x28, 0xc, {0xc, 0xc}, 10, 1000},
+ /* Assert Rx Init for SGMII */
+ {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x40000000, {NA, 0x40000000},
+ 0, 0},
+ /* Assert Rx Init for SATA */
+ {ISOLATE_REG, 0x800, 0x400, {0x400, NA}, 0, 0},
+ /* Wait for PHY power up sequence to finish */
+ {COMMON_PHY_STATUS1_REG, 0x28, 0x1, {0x1, 0x1}, 1, 1000},
+ /* De-assert Rx Init for SGMII */
+ {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x40000000, {NA, 0x0}, 0, 0},
+ /* De-assert Rx Init for SATA */
+ {ISOLATE_REG, 0x800, 0x400, {0x0, NA}, 0, 0},
+ /* os_ph_offset_force (align 90) */
+ {RX_REG3, 0x800, 0xff, {0xde, NO_DATA}, 0, 0},
+ /* Set os_ph_valid */
+ {RX_REG3, 0x800, 0x100, {0x100, NO_DATA}, 0, 0},
+ /* Unset os_ph_valid */
+ {RX_REG3, 0x800, 0x100, {0x0, NO_DATA}, 0, 0},
+};
+
+struct op_params sata_electrical_config_serdes_rev1_params[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, SATA data, wait_time,
+ * num_of_loops
+ */
+ /* enable SSC and DFE update enable */
+ {COMMON_PHY_CONFIGURATION4_REG, 0x28, 0x400008, {0x400000,}, 0, 0},
+ /* tximpcal_th and rximpcal_th */
+ {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x4000,}, 0, 0},
+ /* SQ_THRESH and FFE Setting */
+ {SQUELCH_FFE_SETTING_REG, 0x800, 0xfff, {0x6cf,}, 0, 0},
+ /* G1_TX SLEW, EMPH1 and AMP */
+ {G1_SETTINGS_0_REG, 0x800, 0xffff, {0x8a32,}, 0, 0},
+ /* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+ {G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9,}, 0, 0},
+ /* G2_TX SLEW, EMPH1 and AMP */
+ {G2_SETTINGS_0_REG, 0x800, 0xffff, {0x8b5c,}, 0, 0},
+ /* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+ {G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2,}, 0, 0},
+ /* G3_TX SLEW, EMPH1 and AMP */
+ {G3_SETTINGS_0_REG, 0x800, 0xffff, {0xe6e,}, 0, 0},
+ /* G3_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+ {G3_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2,}, 0, 0},
+ /* Cal rxclkalign90 ext enable and Cal os ph ext */
+ {CAL_REG6, 0x800, 0xff00, {0xdd00,}, 0, 0},
+ /* Dtl Clamping disable and Dtl clamping Sel(6000ppm) */
+ {RX_REG2, 0x800, 0xf0, {0x70,}, 0, 0},
+};
+
+struct op_params sata_electrical_config_serdes_rev2_params[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, SATA data, wait_time,
+ * num_of_loops
+ */
+ /* SQ_THRESH and FFE Setting */
+ {SQUELCH_FFE_SETTING_REG, 0x800, 0xf00, {0x600}, 0, 0},
+ /* enable SSC and DFE update enable */
+ {COMMON_PHY_CONFIGURATION4_REG, 0x28, 0x400008, {0x400000}, 0, 0},
+ /* G1_TX SLEW, EMPH1 and AMP */
+ {G1_SETTINGS_0_REG, 0x800, 0xffff, {0x8a32}, 0, 0},
+ /* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+ {G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0},
+ /* G2_TX SLEW, EMPH1 and AMP */
+ {G2_SETTINGS_0_REG, 0x800, 0xffff, {0x8b5c}, 0, 0},
+ /* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+ {G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2}, 0, 0},
+ /* G3_TX SLEW, EMPH1 and AMP */
+ {G3_SETTINGS_0_REG, 0x800, 0xffff, {0xe6e}, 0, 0},
+ /*
+ * G3_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI & DFE_En Gen3,
+ * DC wander calibration dis
+ */
+ {G3_SETTINGS_1_REG, 0x800, 0x47ff, {0x7d2}, 0, 0},
+ /* Bit[12]=0x0 idle_sync_en */
+ {PCIE_REG0, 0x800, 0x1000, {0x0}, 0, 0},
+ /* Dtl Clamping disable and Dtl clamping Sel(6000ppm) */
+ {RX_REG2, 0x800, 0xf0, {0x70,}, 0, 0},
+ /* tximpcal_th and rximpcal_th */
+ {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x3000}, 0, 0},
+ /* DFE_STEP_FINE_FX[3:0] =0xa */
+ {DFE_REG0, 0x800, 0xa00f, {0x800a}, 0, 0},
+ /* DFE_EN and Dis Update control from pin disable */
+ {DFE_REG3, 0x800, 0xc000, {0x0}, 0, 0},
+ /* FFE Force FFE_REs and cap settings for Gen1 */
+ {G1_SETTINGS_3_REG, 0x800, 0xff, {0xcf}, 0, 0},
+ /* FFE Force FFE_REs and cap settings for Gen2 */
+ {G2_SETTINGS_3_REG, 0x800, 0xff, {0xbf}, 0, 0},
+ /* FE Force FFE_REs=4 and cap settings for Gen3n */
+ {G3_SETTINGS_3_REG, 0x800, 0xff, {0xcf}, 0, 0},
+ /* Set DFE Gen 3 Resolution to 3 */
+ {G3_SETTINGS_4_REG, 0x800, 0x300, {0x300}, 0, 0},
+};
+
+struct op_params sgmii_electrical_config_serdes_rev1_params[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, SGMII (1.25G), SGMII (3.125G),
+ * wait_time, num_of_loops
+ */
+ /* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+ {G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9, 0x3c9}, 0, 0},
+ /* SQ_THRESH and FFE Setting */
+ {SQUELCH_FFE_SETTING_REG, 0x800, 0xfff, {0x8f, 0xbf}, 0, 0},
+ /* tximpcal_th and rximpcal_th */
+ {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x4000, 0x4000}, 0, 0},
+};
+
+struct op_params sgmii_electrical_config_serdes_rev2_params[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, SGMII (1.25G), SGMII (3.125G),
+ * wait_time, num_of_loops
+ */
+ /* Set Slew_rate, Emph and Amp */
+ {G1_SETTINGS_0_REG, 0x800, 0xffff, {0x8fa, 0x8fa}, 0, 0},
+ /* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+ {G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9, 0x3c9}, 0, 0},
+ /* DTL_FLOOP_EN */
+ {RX_REG2, 0x800, 0x4, {0x0, 0x0}, 0, 0},
+ /* G1 FFE Setting Force, RES and CAP */
+ {G1_SETTINGS_3_REG, 0x800, 0xff, {0x8f, 0xbf}, 0, 0},
+ /* tximpcal_th and rximpcal_th */
+ {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x3000, 0x3000}, 0, 0},
+};
+
+/*
+ * PEX and USB3
+ */
+
+/* PEX and USB3 - power up seq for Serdes Rev 1.2 */
+struct op_params pex_and_usb3_power_up_serdes_rev1_params[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, PEX data, USB3 data,
+ * wait_time, num_of_loops
+ */
+ {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x3fc7f806,
+ {0x4471804, 0x4479804}, 0, 0},
+ {COMMON_PHY_CONFIGURATION2_REG, 0x28, 0x5c, {0x58, 0x58}, 0, 0},
+ {COMMON_PHY_CONFIGURATION4_REG, 0x28, 0x3, {0x1, 0x1}, 0, 0},
+ {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x7800, {0x6000, 0xe000}, 0, 0},
+ {GLOBAL_CLK_CTRL, 0x800, 0xd, {0x5, 0x1}, 0, 0},
+ /* Ref clock source select */
+ {MISC_REG, 0x800, 0x4c0, {0x80, 0x4c0}, 0, 0}
+};
+
+/* PEX and USB3 - power up seq for Serdes Rev 2.1 */
+struct op_params pex_and_usb3_power_up_serdes_rev2_params[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, PEX data, USB3 data,
+ * wait_time, num_of_loops
+ */
+ {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x3fc7f806,
+ {0x4471804, 0x4479804}, 0, 0},
+ {COMMON_PHY_CONFIGURATION2_REG, 0x28, 0x5c, {0x58, 0x58}, 0, 0},
+ {COMMON_PHY_CONFIGURATION4_REG, 0x28, 0x3, {0x1, 0x1}, 0, 0},
+ {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x7800, {0x6000, 0xe000}, 0, 0},
+ {GLOBAL_CLK_CTRL, 0x800, 0xd, {0x5, 0x1}, 0, 0},
+ {GLOBAL_MISC_CTRL, 0x800, 0xc0, {0x0, NO_DATA}, 0, 0},
+ /* Ref clock source select */
+ {MISC_REG, 0x800, 0x4c0, {0x80, 0x4c0}, 0, 0}
+};
+
+/* PEX and USB3 - speed config seq */
+struct op_params pex_and_usb3_speed_config_params[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, PEX data, USB3 data,
+ * wait_time, num_of_loops
+ */
+ /* Maximal PHY Generation Setting */
+ {INTERFACE_REG, 0x800, 0xc00, {0x400, 0x400, 0x400, 0x400, 0x400},
+ 0, 0},
+};
+
+struct op_params usb3_electrical_config_serdes_rev1_params[] = {
+ /* Spread Spectrum Clock Enable */
+ {LANE_CFG4_REG, 0x800, 0x80, {0x80}, 0, 0},
+ /* G2_TX_SSC_AMP[6:0]=4.5k_p_pM and TX emphasis mode=m_v */
+ {G2_SETTINGS_2_REG, 0x800, 0xfe40, {0x4440}, 0, 0},
+ /* tximpcal_th and rximpcal_th */
+ {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x4000}, 0, 0},
+ /* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+ {G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2}, 0, 0},
+ /* FFE Setting Force, RES and CAP */
+ {SQUELCH_FFE_SETTING_REG, 0x800, 0xff, {0xef}, 0, 0},
+ /* Dtl Clamping disable and Dtl-clamping-Sel(6000ppm) */
+ {RX_REG2, 0x800, 0xf0, {0x70}, 0, 0},
+ /* cal_rxclkalign90_ext_en and cal_os_ph_ext */
+ {CAL_REG6, 0x800, 0xff00, {0xd500}, 0, 0},
+ /* vco_cal_vth_sel */
+ {REF_REG0, 0x800, 0x38, {0x20}, 0, 0},
+};
+
+struct op_params usb3_electrical_config_serdes_rev2_params[] = {
+ /* Spread Spectrum Clock Enable */
+ {LANE_CFG4_REG, 0x800, 0x80, {0x80}, 0, 0},
+ /* G2_TX_SSC_AMP[6:0]=4.5k_p_pM and TX emphasis mode=m_v */
+ {G2_SETTINGS_2_REG, 0x800, 0xfe40, {0x4440}, 0, 0},
+ /* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+ {G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3d2}, 0, 0},
+ /* Dtl Clamping disable and Dtl-clamping-Sel(6000ppm) */
+ {RX_REG2, 0x800, 0xf0, {0x70}, 0, 0},
+ /* vco_cal_vth_sel */
+ {REF_REG0, 0x800, 0x38, {0x20}, 0, 0},
+ /* Spread Spectrum Clock Enable */
+ {LANE_CFG5_REG, 0x800, 0x4, {0x4}, 0, 0},
+};
+
+/* PEX and USB3 - TX config seq */
+
+/*
+ * For PEXx1: the pex_and_usb3_tx_config_params1/2/3 configurations should run
+ * one by one on the lane.
+ * For PEXx4: the pex_and_usb3_tx_config_params1/2/3 configurations should run
+ * by setting each sequence for all 4 lanes.
+ */
+struct op_params pex_and_usb3_tx_config_params1[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, PEX data, USB3 data,
+ * wait_time, num_of_loops
+ */
+ {GLOBAL_CLK_CTRL, 0x800, 0x1, {0x0, 0x0}, 0, 0},
+ /* 10ms delay */
+ {0x0, 0x0, 0x0, {0x0, 0x0}, 10, 0},
+ /* os_ph_offset_force (align 90) */
+ {RX_REG3, 0x800, 0xff, {0xdc, NO_DATA}, 0, 0},
+ /* Set os_ph_valid */
+ {RX_REG3, 0x800, 0x100, {0x100, NO_DATA}, 0, 0},
+ /* Unset os_ph_valid */
+ {RX_REG3, 0x800, 0x100, {0x0, NO_DATA}, 0, 0},
+};
+
+struct op_params pex_and_usb3_tx_config_params2[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, PEX data, USB3 data,
+ * wait_time, num_of_loops
+ */
+ /* Sft Reset pulse */
+ {RESET_DFE_REG, 0x800, 0x401, {0x401, 0x401}, 0, 0},
+};
+
+struct op_params pex_and_usb3_tx_config_params3[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, PEX data, USB3 data,
+ * wait_time, num_of_loops
+ */
+ /* Sft Reset pulse */
+ {RESET_DFE_REG, 0x800, 0x401, {0x0, 0x0}, 0, 0},
+ /* 10ms delay */
+ {0x0, 0x0, 0x0, {0x0, 0x0}, 10, 0}
+};
+
+/* PEX by 4 config seq */
+struct op_params pex_by4_config_params[] = {
+ /* unit_base_reg, unit_offset, mask, data, wait_time, num_of_loops */
+ {GLOBAL_CLK_SRC_HI, 0x800, 0x7, {0x5, 0x0, 0x0, 0x2}, 0, 0},
+ /* Lane Alignement enable */
+ {LANE_ALIGN_REG0, 0x800, 0x1000, {0x0, 0x0, 0x0, 0x0}, 0, 0},
+ /* Max PLL phy config */
+ {CALIBRATION_CTRL_REG, 0x800, 0x1000, {0x1000, 0x1000, 0x1000, 0x1000},
+ 0, 0},
+ /* Max PLL pipe config */
+ {LANE_CFG1_REG, 0x800, 0x600, {0x600, 0x600, 0x600, 0x600}, 0, 0},
+};
+
+/* USB3 device donfig seq */
+struct op_params usb3_device_config_params[] = {
+ /* unit_base_reg, unit_offset, mask, data, wait_time, num_of_loops */
+ {LANE_CFG4_REG, 0x800, 0x200, {0x200}, 0, 0}
+};
+
+/* PEX - electrical configuration seq Rev 1.2 */
+struct op_params pex_electrical_config_serdes_rev1_params[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, PEX data, wait_time,
+ * num_of_loops
+ */
+ /* G1_TX_SLEW_CTRL_EN and G1_TX_SLEW_RATE */
+ {G1_SETTINGS_0_REG, 0x800, 0xf000, {0xb000}, 0, 0},
+ /* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+ {G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0},
+ /* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+ {G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0},
+ /* CFG_DFE_EN_SEL */
+ {LANE_CFG4_REG, 0x800, 0x8, {0x8}, 0, 0},
+ /* FFE Setting Force, RES and CAP */
+ {SQUELCH_FFE_SETTING_REG, 0x800, 0xff, {0xaf}, 0, 0},
+ /* tximpcal_th and rximpcal_th */
+ {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x3000}, 0, 0},
+ /* cal_rxclkalign90_ext_en and cal_os_ph_ext */
+ {CAL_REG6, 0x800, 0xff00, {0xdc00}, 0, 0},
+};
+
+/* PEX - electrical configuration seq Rev 2.1 */
+struct op_params pex_electrical_config_serdes_rev2_params[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, PEX data, wait_time,
+ * num_of_loops
+ */
+ /* G1_TX_SLEW_CTRL_EN and G1_TX_SLEW_RATE */
+ {G1_SETTINGS_0_REG, 0x800, 0xf000, {0xb000}, 0, 0},
+ /* G1_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+ {G1_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0},
+ /* G1 FFE Setting Force, RES and CAP */
+ {G1_SETTINGS_3_REG, 0x800, 0xff, {0xcf}, 0, 0},
+ /* G2_RX SELMUFF, SELMUFI, SELMUPF and SELMUPI */
+ {G2_SETTINGS_1_REG, 0x800, 0x3ff, {0x3c9}, 0, 0},
+ /* G2 FFE Setting Force, RES and CAP */
+ {G2_SETTINGS_3_REG, 0x800, 0xff, {0xaf}, 0, 0},
+ /* G2 DFE resolution value */
+ {G2_SETTINGS_4_REG, 0x800, 0x300, {0x300}, 0, 0},
+ /* DFE resolution force */
+ {DFE_REG0, 0x800, 0x8000, {0x8000}, 0, 0},
+ /* Tx amplitude for Tx Margin 0 */
+ {PCIE_REG1, 0x800, 0xf80, {0xd00}, 0, 0},
+ /* Tx_Emph value for -3.5d_b and -6d_b */
+ {PCIE_REG3, 0x800, 0xff00, {0xaf00}, 0, 0},
+ /* CFG_DFE_EN_SEL */
+ {LANE_CFG4_REG, 0x800, 0x8, {0x8}, 0, 0},
+ /* tximpcal_th and rximpcal_th */
+ {VTHIMPCAL_CTRL_REG, 0x800, 0xff00, {0x3000}, 0, 0},
+};
+
+/* PEX - configuration seq for REF_CLOCK_25MHz */
+struct op_params pex_config_ref_clock25_m_hz[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, PEX data, wait_time,
+ * num_of_loops
+ */
+ /* Bits[4:0]=0x2 - REF_FREF_SEL */
+ {POWER_AND_PLL_CTRL_REG, 0x800, 0x1f, {0x2}, 0, 0},
+ /* Bit[10]=0x1 - REFCLK_SEL */
+ {MISC_REG, 0x800, 0x400, {0x400}, 0, 0},
+ /* Bits[7:0]=0x7 - CFG_PM_RXDLOZ_WAIT */
+ {GLOBAL_PM_CTRL, 0x800, 0xff, {0x7}, 0, 0},
+};
+
+/* PEX - configuration seq for REF_CLOCK_40MHz */
+struct op_params pex_config_ref_clock40_m_hz[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, PEX data, wait_time,
+ * num_of_loops
+ */
+ /* Bits[4:0]=0x3 - REF_FREF_SEL */
+ {POWER_AND_PLL_CTRL_REG, 0x800, 0x1f, {0x3}, 0, 0},
+ /* Bits[10]=0x1 - REFCLK_SEL */
+ {MISC_REG, 0x800, 0x400, {0x400}, 0, 0},
+ /* Bits[7:0]=0xc - CFG_PM_RXDLOZ_WAIT */
+ {GLOBAL_PM_CTRL, 0x800, 0xff, {0xc}, 0, 0},
+};
+
+/* PEX - configuration seq for REF_CLOCK_100MHz */
+struct op_params pex_config_ref_clock100_m_hz[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, PEX data, wait_time,
+ * num_of_loops
+ */
+ /* Bits[4:0]=0x0 - REF_FREF_SEL */
+ {POWER_AND_PLL_CTRL_REG, 0x800, 0x1f, {0x0}, 0, 0},
+ /* Bit[10]=0x0 - REFCLK_SEL */
+ {MISC_REG, 0x800, 0x400, {0x0}, 0, 0},
+ /* Bits[7:0]=0x1e - CFG_PM_RXDLOZ_WAIT */
+ {GLOBAL_PM_CTRL, 0x800, 0xff, {0x1e}, 0, 0},
+};
+
+/*
+ * USB2
+ */
+
+struct op_params usb2_power_up_params[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, USB2 data, wait_time,
+ * num_of_loops
+ */
+ /* Init phy 0 */
+ {0x18440, 0x0 /*NA*/, 0xffffffff, {0x62}, 0, 0},
+ /* Init phy 1 */
+ {0x18444, 0x0 /*NA*/, 0xffffffff, {0x62}, 0, 0},
+ /* Init phy 2 */
+ {0x18448, 0x0 /*NA*/, 0xffffffff, {0x62}, 0, 0},
+ /* Phy offset 0x0 - PLL_CONTROL0 */
+ {0xc0000, 0x0 /*NA*/, 0xffffffff, {0x40605205}, 0, 0},
+ {0xc001c, 0x0 /*NA*/, 0xffffffff, {0x39f16ce}, 0, 0},
+ {0xc201c, 0x0 /*NA*/, 0xffffffff, {0x39f16ce}, 0, 0},
+ {0xc401c, 0x0 /*NA*/, 0xffffffff, {0x39f16ce}, 0, 0},
+ /* Phy offset 0x1 - PLL_CONTROL1 */
+ {0xc0004, 0x0 /*NA*/, 0x1, {0x1}, 0, 0},
+ /* Phy0 register 3 - TX Channel control 0 */
+ {0xc000c, 0x0 /*NA*/, 0x1000000, {0x1000000}, 0, 0},
+ /* Phy0 register 3 - TX Channel control 0 */
+ {0xc200c, 0x0 /*NA*/, 0x1000000, {0x1000000}, 0, 0},
+ /* Phy0 register 3 - TX Channel control 0 */
+ {0xc400c, 0x0 /*NA*/, 0x1000000, {0x1000000}, 0, 0},
+ /* check PLLCAL_DONE is set and IMPCAL_DONE is set */
+ {0xc0008, 0x0 /*NA*/, 0x80800000, {0x80800000}, 1, 1000},
+ /* check REG_SQCAL_DONE is set */
+ {0xc0018, 0x0 /*NA*/, 0x80000000, {0x80000000}, 1, 1000},
+ /* check PLL_READY is set */
+ {0xc0000, 0x0 /*NA*/, 0x80000000, {0x80000000}, 1, 1000}
+};
+
+/*
+ * QSGMII
+ */
+
+/* QSGMII - power up seq */
+struct op_params qsgmii_port_power_up_params[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, QSGMII data, wait_time,
+ * num_of_loops
+ */
+ /* Connect the QSGMII to Gigabit Ethernet units */
+ {QSGMII_CONTROL_REG1, 0x0, 0x40000000, {0x40000000}, 0, 0},
+ /* Power Up */
+ {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0xf0006, {0x80002}, 0, 0},
+ /* Unreset */
+ {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x7800, {0x6000}, 0, 0},
+ /* Phy Selector */
+ {POWER_AND_PLL_CTRL_REG, 0x800, 0xff, {0xfc81}, 0, 0},
+ /* Ref clock source select */
+ {MISC_REG, 0x800, 0x4c0, {0x480}, 0, 0}
+};
+
+/* QSGMII - speed config seq */
+struct op_params qsgmii_port_speed_config_params[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, QSGMII data, wait_time,
+ * num_of_loops
+ */
+ /* Baud Rate */
+ {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x3fc00000, {0xcc00000}, 0, 0},
+ /* Phy Gen RX and TX */
+ {ISOLATE_REG, 0x800, 0xff, {0x33}, 0, 0},
+ /* Bus Width */
+ {LOOPBACK_REG, 0x800, 0xe, {0x2}, 0, 0}
+};
+
+/* QSGMII - Select electrical param seq */
+struct op_params qsgmii_port_electrical_config_params[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, QSGMII data, wait_time,
+ * num_of_loops
+ */
+ /* Slew rate and emphasis */
+ {G1_SETTINGS_0_REG, 0x800, 0x8000, {0x0}, 0, 0}
+};
+
+/* QSGMII - TX config seq */
+struct op_params qsgmii_port_tx_config_params1[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, QSGMII data, wait_time,
+ * num_of_loops
+ */
+ {GLUE_REG, 0x800, 0x1800, {0x800}, 0, 0},
+ /* Sft Reset pulse */
+ {RESET_DFE_REG, 0x800, 0x401, {0x401}, 0, 0},
+ /* Sft Reset pulse */
+ {RESET_DFE_REG, 0x800, 0x401, {0x0}, 0, 0},
+ /* Lane align */
+ {LANE_ALIGN_REG0, 0x800, 0x1000, {0x1000}, 0, 0},
+ /* Power up PLL, RX and TX */
+ {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x70000, {0x70000}, 0, 0},
+ /* Tx driver output idle */
+ {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x80000, {0x80000}, 0, 0}
+};
+
+struct op_params qsgmii_port_tx_config_params2[] = {
+ /*
+ * unit_base_reg, unit_offset, mask, QSGMII data, wait_time,
+ * num_of_loops
+ */
+ /* Wait for PHY power up sequence to finish */
+ {COMMON_PHY_STATUS1_REG, 0x28, 0xc, {0xc}, 10, 1000},
+ /* Assert Rx Init and Tx driver output valid */
+ {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x40080000, {0x40000000}, 0, 0},
+ /* Wait for PHY power up sequence to finish */
+ {COMMON_PHY_STATUS1_REG, 0x28, 0x1, {0x1}, 1, 1000},
+ /* De-assert Rx Init */
+ {COMMON_PHY_CONFIGURATION1_REG, 0x28, 0x40000000, {0x0}, 0, 0}
+};
+
+/* SERDES_POWER_DOWN */
+struct op_params serdes_power_down_params[] = {
+ {COMMON_PHY_CONFIGURATION1_REG, 0x28, (0xf << 11), {(0x3 << 11)},
+ 0, 0},
+ {COMMON_PHY_CONFIGURATION1_REG, 0x28, (0x7 << 16), {0}, 0, 0}
+};
+
+/*
+ * hws_ctrl_serdes_rev_get
+ *
+ * DESCRIPTION: Get the Serdes revision number
+ *
+ * INPUT: config_field - Field description enum
+ *
+ * OUTPUT: None
+ *
+ * RETURN:
+ * 8bit Serdes revision number
+ */
+u8 hws_ctrl_serdes_rev_get(void)
+{
+#ifdef CONFIG_ARMADA_38X
+ /* for A38x-Z1 */
+ if (sys_env_device_rev_get() == MV_88F68XX_Z1_ID)
+ return MV_SERDES_REV_1_2;
+#endif
+
+ /* for A39x-Z1, A38x-A0 */
+ return MV_SERDES_REV_2_1;
+}
+
+u32 hws_serdes_topology_verify(enum serdes_type serdes_type, u32 serdes_id,
+ enum serdes_mode serdes_mode)
+{
+ u32 test_result = 0;
+ u8 serd_max_num, unit_numb;
+ enum unit_id unit_id;
+
+ if (serdes_type > RXAUI) {
+ printf("%s: Warning: Wrong serdes type %s serdes#%d\n",
+ __func__, serdes_type_to_string[serdes_type], serdes_id);
+ return MV_FAIL;
+ }
+
+ unit_id = serdes_type_to_unit_info[serdes_type].serdes_unit_id;
+ unit_numb = serdes_type_to_unit_info[serdes_type].serdes_unit_num;
+ serd_max_num = sys_env_unit_max_num_get(unit_id);
+
+ /* if didn't exceed amount of required Serdes lanes for current type */
+ if (serdes_lane_in_use_count[unit_id][unit_numb] != 0) {
+ /* update amount of required Serdes lanes for current type */
+ serdes_lane_in_use_count[unit_id][unit_numb]--;
+
+ /*
+ * If reached the exact amount of required Serdes lanes for
+ * current type
+ */
+ if (serdes_lane_in_use_count[unit_id][unit_numb] == 0) {
+ if (((serdes_type <= PEX3)) &&
+ ((serdes_mode == PEX_END_POINT_X4) ||
+ (serdes_mode == PEX_ROOT_COMPLEX_X4))) {
+ /* PCiex4 uses 2 SerDes */
+ serdes_unit_count[PEX_UNIT_ID] += 2;
+ } else {
+ serdes_unit_count[unit_id]++;
+ }
+
+ /* test SoC unit count limitation */
+ if (serdes_unit_count[unit_id] > serd_max_num) {
+ test_result = WRONG_NUMBER_OF_UNITS;
+ } else if (unit_numb >= serd_max_num) {
+ /* test SoC unit number limitation */
+ test_result = UNIT_NUMBER_VIOLATION;
+ }
+ }
+ } else {
+ test_result = SERDES_ALREADY_IN_USE;
+ if (test_result == SERDES_ALREADY_IN_USE) {
+ printf("%s: Error: serdes lane %d is configured to type %s: type already in use\n",
+ __func__, serdes_id,
+ serdes_type_to_string[serdes_type]);
+ return MV_FAIL;
+ } else if (test_result == WRONG_NUMBER_OF_UNITS) {
+ printf("%s: Warning: serdes lane %d is set to type %s.\n",
+ __func__, serdes_id,
+ serdes_type_to_string[serdes_type]);
+ printf("%s: Maximum supported lanes are already set to this type (limit = %d)\n",
+ __func__, serd_max_num);
+ return MV_FAIL;
+ } else if (test_result == UNIT_NUMBER_VIOLATION) {
+ printf("%s: Warning: serdes lane %d type is %s: current device support only %d units of this type.\n",
+ __func__, serdes_id,
+ serdes_type_to_string[serdes_type],
+ serd_max_num);
+ return MV_FAIL;
+ }
+ }
+
+ return MV_OK;
+}
+
+void hws_serdes_xaui_topology_verify(void)
+{
+ /*
+ * If XAUI is in use - serdes_lane_in_use_count has to be = 0;
+ * if it is not in use hast be = 4
+ */
+ if ((serdes_lane_in_use_count[XAUI_UNIT_ID][0] != 0) &&
+ (serdes_lane_in_use_count[XAUI_UNIT_ID][0] != 4)) {
+ printf("%s: Warning: wrong number of lanes is set to XAUI - %d\n",
+ __func__, serdes_lane_in_use_count[XAUI_UNIT_ID][0]);
+ printf("%s: XAUI has to be defined on 4 lanes\n", __func__);
+ }
+
+ /*
+ * If RXAUI is in use - serdes_lane_in_use_count has to be = 0;
+ * if it is not in use hast be = 2
+ */
+ if ((serdes_lane_in_use_count[RXAUI_UNIT_ID][0] != 0) &&
+ (serdes_lane_in_use_count[RXAUI_UNIT_ID][0] != 2)) {
+ printf("%s: Warning: wrong number of lanes is set to RXAUI - %d\n",
+ __func__, serdes_lane_in_use_count[RXAUI_UNIT_ID][0]);
+ printf("%s: RXAUI has to be defined on 2 lanes\n", __func__);
+ }
+}
+
+int hws_serdes_seq_db_init(void)
+{
+ u8 serdes_rev = hws_ctrl_serdes_rev_get();
+
+ DEBUG_INIT_FULL_S("\n### serdes_seq38x_init ###\n");
+
+ if (serdes_rev == MV_SERDES_REV_NA) {
+ printf("hws_serdes_seq_db_init: serdes revision number is not supported\n");
+ return MV_NOT_SUPPORTED;
+ }
+
+ /* SATA_PORT_0_ONLY_POWER_UP_SEQ sequence init */
+ serdes_seq_db[SATA_PORT_0_ONLY_POWER_UP_SEQ].op_params_ptr =
+ sata_port0_power_up_params;
+ serdes_seq_db[SATA_PORT_0_ONLY_POWER_UP_SEQ].cfg_seq_size =
+ sizeof(sata_port0_power_up_params) / sizeof(struct op_params);
+ serdes_seq_db[SATA_PORT_0_ONLY_POWER_UP_SEQ].data_arr_idx = SATA;
+
+ /* SATA_PORT_1_ONLY_POWER_UP_SEQ sequence init */
+ serdes_seq_db[SATA_PORT_1_ONLY_POWER_UP_SEQ].op_params_ptr =
+ sata_port1_power_up_params;
+ serdes_seq_db[SATA_PORT_1_ONLY_POWER_UP_SEQ].cfg_seq_size =
+ sizeof(sata_port1_power_up_params) / sizeof(struct op_params);
+ serdes_seq_db[SATA_PORT_1_ONLY_POWER_UP_SEQ].data_arr_idx = SATA;
+
+ /* SATA_POWER_UP_SEQ sequence init */
+ serdes_seq_db[SATA_POWER_UP_SEQ].op_params_ptr =
+ sata_and_sgmii_power_up_params;
+ serdes_seq_db[SATA_POWER_UP_SEQ].cfg_seq_size =
+ sizeof(sata_and_sgmii_power_up_params) / sizeof(struct op_params);
+ serdes_seq_db[SATA_POWER_UP_SEQ].data_arr_idx = SATA;
+
+ /* SATA_1_5_SPEED_CONFIG_SEQ sequence init */
+ serdes_seq_db[SATA_1_5_SPEED_CONFIG_SEQ].op_params_ptr =
+ sata_and_sgmii_speed_config_params;
+ serdes_seq_db[SATA_1_5_SPEED_CONFIG_SEQ].cfg_seq_size =
+ sizeof(sata_and_sgmii_speed_config_params) /
+ sizeof(struct op_params);
+ serdes_seq_db[SATA_1_5_SPEED_CONFIG_SEQ].data_arr_idx = SATA;
+
+ /* SATA_3_SPEED_CONFIG_SEQ sequence init */
+ serdes_seq_db[SATA_3_SPEED_CONFIG_SEQ].op_params_ptr =
+ sata_and_sgmii_speed_config_params;
+ serdes_seq_db[SATA_3_SPEED_CONFIG_SEQ].cfg_seq_size =
+ sizeof(sata_and_sgmii_speed_config_params) /
+ sizeof(struct op_params);
+ serdes_seq_db[SATA_3_SPEED_CONFIG_SEQ].data_arr_idx = SATA;
+
+ /* SATA_6_SPEED_CONFIG_SEQ sequence init */
+ serdes_seq_db[SATA_6_SPEED_CONFIG_SEQ].op_params_ptr =
+ sata_and_sgmii_speed_config_params;
+ serdes_seq_db[SATA_6_SPEED_CONFIG_SEQ].cfg_seq_size =
+ sizeof(sata_and_sgmii_speed_config_params) /
+ sizeof(struct op_params);
+ serdes_seq_db[SATA_6_SPEED_CONFIG_SEQ].data_arr_idx = SATA;
+
+ /* SATA_ELECTRICAL_CONFIG_SEQ seq sequence init */
+ if (serdes_rev == MV_SERDES_REV_1_2) {
+ serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].op_params_ptr =
+ sata_electrical_config_serdes_rev1_params;
+ serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].cfg_seq_size =
+ sizeof(sata_electrical_config_serdes_rev1_params) /
+ sizeof(struct op_params);
+ } else {
+ serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].op_params_ptr =
+ sata_electrical_config_serdes_rev2_params;
+ serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].cfg_seq_size =
+ sizeof(sata_electrical_config_serdes_rev2_params) /
+ sizeof(struct op_params);
+ }
+ serdes_seq_db[SATA_ELECTRICAL_CONFIG_SEQ].data_arr_idx = SATA;
+
+ /* SATA_TX_CONFIG_SEQ sequence init */
+ serdes_seq_db[SATA_TX_CONFIG_SEQ1].op_params_ptr =
+ sata_and_sgmii_tx_config_params1;
+ serdes_seq_db[SATA_TX_CONFIG_SEQ1].cfg_seq_size =
+ sizeof(sata_and_sgmii_tx_config_params1) / sizeof(struct op_params);
+ serdes_seq_db[SATA_TX_CONFIG_SEQ1].data_arr_idx = SATA;
+
+ /* SATA_PORT_0_ONLY_TX_CONFIG_SEQ sequence init */
+ serdes_seq_db[SATA_PORT_0_ONLY_TX_CONFIG_SEQ].op_params_ptr =
+ sata_port0_tx_config_params;
+ serdes_seq_db[SATA_PORT_0_ONLY_TX_CONFIG_SEQ].cfg_seq_size =
+ sizeof(sata_port0_tx_config_params) / sizeof(struct op_params);
+ serdes_seq_db[SATA_PORT_0_ONLY_TX_CONFIG_SEQ].data_arr_idx = SATA;
+
+ /* SATA_PORT_1_ONLY_TX_CONFIG_SEQ sequence init */
+ serdes_seq_db[SATA_PORT_1_ONLY_TX_CONFIG_SEQ].op_params_ptr =
+ sata_port1_tx_config_params;
+ serdes_seq_db[SATA_PORT_1_ONLY_TX_CONFIG_SEQ].cfg_seq_size =
+ sizeof(sata_port1_tx_config_params) / sizeof(struct op_params);
+ serdes_seq_db[SATA_PORT_1_ONLY_TX_CONFIG_SEQ].data_arr_idx = SATA;
+
+ /* SATA_TX_CONFIG_SEQ2 sequence init */
+ if (serdes_rev == MV_SERDES_REV_1_2) {
+ serdes_seq_db[SATA_TX_CONFIG_SEQ2].op_params_ptr =
+ sata_and_sgmii_tx_config_serdes_rev1_params2;
+ serdes_seq_db[SATA_TX_CONFIG_SEQ2].cfg_seq_size =
+ sizeof(sata_and_sgmii_tx_config_serdes_rev1_params2) /
+ sizeof(struct op_params);
+ } else {
+ serdes_seq_db[SATA_TX_CONFIG_SEQ2].op_params_ptr =
+ sata_and_sgmii_tx_config_serdes_rev2_params2;
+ serdes_seq_db[SATA_TX_CONFIG_SEQ2].cfg_seq_size =
+ sizeof(sata_and_sgmii_tx_config_serdes_rev2_params2) /
+ sizeof(struct op_params);
+ }
+ serdes_seq_db[SATA_TX_CONFIG_SEQ2].data_arr_idx = SATA;
+
+ /* SGMII_POWER_UP_SEQ sequence init */
+ serdes_seq_db[SGMII_POWER_UP_SEQ].op_params_ptr =
+ sata_and_sgmii_power_up_params;
+ serdes_seq_db[SGMII_POWER_UP_SEQ].cfg_seq_size =
+ sizeof(sata_and_sgmii_power_up_params) / sizeof(struct op_params);
+ serdes_seq_db[SGMII_POWER_UP_SEQ].data_arr_idx = SGMII;
+
+ /* SGMII_1_25_SPEED_CONFIG_SEQ sequence init */
+ serdes_seq_db[SGMII_1_25_SPEED_CONFIG_SEQ].op_params_ptr =
+ sata_and_sgmii_speed_config_params;
+ serdes_seq_db[SGMII_1_25_SPEED_CONFIG_SEQ].cfg_seq_size =
+ sizeof(sata_and_sgmii_speed_config_params) /
+ sizeof(struct op_params);
+ serdes_seq_db[SGMII_1_25_SPEED_CONFIG_SEQ].data_arr_idx = SGMII;
+
+ /* SGMII_3_125_SPEED_CONFIG_SEQ sequence init */
+ serdes_seq_db[SGMII_3_125_SPEED_CONFIG_SEQ].op_params_ptr =
+ sata_and_sgmii_speed_config_params;
+ serdes_seq_db[SGMII_3_125_SPEED_CONFIG_SEQ].cfg_seq_size =
+ sizeof(sata_and_sgmii_speed_config_params) /
+ sizeof(struct op_params);
+ serdes_seq_db[SGMII_3_125_SPEED_CONFIG_SEQ].data_arr_idx = SGMII_3_125;
+
+ /* SGMII_ELECTRICAL_CONFIG_SEQ seq sequence init */
+ if (serdes_rev == MV_SERDES_REV_1_2) {
+ serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].op_params_ptr =
+ sgmii_electrical_config_serdes_rev1_params;
+ serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].cfg_seq_size =
+ sizeof(sgmii_electrical_config_serdes_rev1_params) /
+ sizeof(struct op_params);
+ } else {
+ serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].op_params_ptr =
+ sgmii_electrical_config_serdes_rev2_params;
+ serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].cfg_seq_size =
+ sizeof(sgmii_electrical_config_serdes_rev2_params) /
+ sizeof(struct op_params);
+ }
+ serdes_seq_db[SGMII_ELECTRICAL_CONFIG_SEQ].data_arr_idx = SGMII;
+
+ /* SGMII_TX_CONFIG_SEQ sequence init */
+ serdes_seq_db[SGMII_TX_CONFIG_SEQ1].op_params_ptr =
+ sata_and_sgmii_tx_config_params1;
+ serdes_seq_db[SGMII_TX_CONFIG_SEQ1].cfg_seq_size =
+ sizeof(sata_and_sgmii_tx_config_params1) / sizeof(struct op_params);
+ serdes_seq_db[SGMII_TX_CONFIG_SEQ1].data_arr_idx = SGMII;
+
+ /* SGMII_TX_CONFIG_SEQ sequence init */
+ if (serdes_rev == MV_SERDES_REV_1_2) {
+ serdes_seq_db[SGMII_TX_CONFIG_SEQ2].op_params_ptr =
+ sata_and_sgmii_tx_config_serdes_rev1_params2;
+ serdes_seq_db[SGMII_TX_CONFIG_SEQ2].cfg_seq_size =
+ sizeof(sata_and_sgmii_tx_config_serdes_rev1_params2) /
+ sizeof(struct op_params);
+ } else {
+ serdes_seq_db[SGMII_TX_CONFIG_SEQ2].op_params_ptr =
+ sata_and_sgmii_tx_config_serdes_rev2_params2;
+ serdes_seq_db[SGMII_TX_CONFIG_SEQ2].cfg_seq_size =
+ sizeof(sata_and_sgmii_tx_config_serdes_rev2_params2) /
+ sizeof(struct op_params);
+ }
+ serdes_seq_db[SGMII_TX_CONFIG_SEQ2].data_arr_idx = SGMII;
+
+ /* PEX_POWER_UP_SEQ sequence init */
+ if (serdes_rev == MV_SERDES_REV_1_2) {
+ serdes_seq_db[PEX_POWER_UP_SEQ].op_params_ptr =
+ pex_and_usb3_power_up_serdes_rev1_params;
+ serdes_seq_db[PEX_POWER_UP_SEQ].cfg_seq_size =
+ sizeof(pex_and_usb3_power_up_serdes_rev1_params) /
+ sizeof(struct op_params);
+ } else {
+ serdes_seq_db[PEX_POWER_UP_SEQ].op_params_ptr =
+ pex_and_usb3_power_up_serdes_rev2_params;
+ serdes_seq_db[PEX_POWER_UP_SEQ].cfg_seq_size =
+ sizeof(pex_and_usb3_power_up_serdes_rev2_params) /
+ sizeof(struct op_params);
+ }
+ serdes_seq_db[PEX_POWER_UP_SEQ].data_arr_idx = PEX;
+
+ /* PEX_2_5_SPEED_CONFIG_SEQ sequence init */
+ serdes_seq_db[PEX_2_5_SPEED_CONFIG_SEQ].op_params_ptr =
+ pex_and_usb3_speed_config_params;
+ serdes_seq_db[PEX_2_5_SPEED_CONFIG_SEQ].cfg_seq_size =
+ sizeof(pex_and_usb3_speed_config_params) / sizeof(struct op_params);
+ serdes_seq_db[PEX_2_5_SPEED_CONFIG_SEQ].data_arr_idx =
+ PEXSERDES_SPEED_2_5_GBPS;
+
+ /* PEX_5_SPEED_CONFIG_SEQ sequence init */
+ serdes_seq_db[PEX_5_SPEED_CONFIG_SEQ].op_params_ptr =
+ pex_and_usb3_speed_config_params;
+ serdes_seq_db[PEX_5_SPEED_CONFIG_SEQ].cfg_seq_size =
+ sizeof(pex_and_usb3_speed_config_params) / sizeof(struct op_params);
+ serdes_seq_db[PEX_5_SPEED_CONFIG_SEQ].data_arr_idx =
+ PEXSERDES_SPEED_5_GBPS;
+
+ /* PEX_ELECTRICAL_CONFIG_SEQ seq sequence init */
+ if (serdes_rev == MV_SERDES_REV_1_2) {
+ serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].op_params_ptr =
+ pex_electrical_config_serdes_rev1_params;
+ serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].cfg_seq_size =
+ sizeof(pex_electrical_config_serdes_rev1_params) /
+ sizeof(struct op_params);
+ } else {
+ serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].op_params_ptr =
+ pex_electrical_config_serdes_rev2_params;
+ serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].cfg_seq_size =
+ sizeof(pex_electrical_config_serdes_rev2_params) /
+ sizeof(struct op_params);
+ }
+ serdes_seq_db[PEX_ELECTRICAL_CONFIG_SEQ].data_arr_idx = PEX;
+
+ /* PEX_TX_CONFIG_SEQ1 sequence init */
+ serdes_seq_db[PEX_TX_CONFIG_SEQ1].op_params_ptr =
+ pex_and_usb3_tx_config_params1;
+ serdes_seq_db[PEX_TX_CONFIG_SEQ1].cfg_seq_size =
+ sizeof(pex_and_usb3_tx_config_params1) / sizeof(struct op_params);
+ serdes_seq_db[PEX_TX_CONFIG_SEQ1].data_arr_idx = PEX;
+
+ /* PEX_TX_CONFIG_SEQ2 sequence init */
+ serdes_seq_db[PEX_TX_CONFIG_SEQ2].op_params_ptr =
+ pex_and_usb3_tx_config_params2;
+ serdes_seq_db[PEX_TX_CONFIG_SEQ2].cfg_seq_size =
+ sizeof(pex_and_usb3_tx_config_params2) / sizeof(struct op_params);
+ serdes_seq_db[PEX_TX_CONFIG_SEQ2].data_arr_idx = PEX;
+
+ /* PEX_TX_CONFIG_SEQ3 sequence init */
+ serdes_seq_db[PEX_TX_CONFIG_SEQ3].op_params_ptr =
+ pex_and_usb3_tx_config_params3;
+ serdes_seq_db[PEX_TX_CONFIG_SEQ3].cfg_seq_size =
+ sizeof(pex_and_usb3_tx_config_params3) / sizeof(struct op_params);
+ serdes_seq_db[PEX_TX_CONFIG_SEQ3].data_arr_idx = PEX;
+
+ /* PEX_BY_4_CONFIG_SEQ sequence init */
+ serdes_seq_db[PEX_BY_4_CONFIG_SEQ].op_params_ptr =
+ pex_by4_config_params;
+ serdes_seq_db[PEX_BY_4_CONFIG_SEQ].cfg_seq_size =
+ sizeof(pex_by4_config_params) / sizeof(struct op_params);
+ serdes_seq_db[PEX_BY_4_CONFIG_SEQ].data_arr_idx = PEX;
+
+ /* PEX_CONFIG_REF_CLOCK_25MHZ_SEQ sequence init */
+ serdes_seq_db[PEX_CONFIG_REF_CLOCK_25MHZ_SEQ].op_params_ptr =
+ pex_config_ref_clock25_m_hz;
+ serdes_seq_db[PEX_CONFIG_REF_CLOCK_25MHZ_SEQ].cfg_seq_size =
+ sizeof(pex_config_ref_clock25_m_hz) / sizeof(struct op_params);
+ serdes_seq_db[PEX_CONFIG_REF_CLOCK_25MHZ_SEQ].data_arr_idx = PEX;
+
+ /* PEX_ELECTRICAL_CONFIG_REF_CLOCK_40MHZ_SEQ sequence init */
+ serdes_seq_db[PEX_CONFIG_REF_CLOCK_40MHZ_SEQ].op_params_ptr =
+ pex_config_ref_clock40_m_hz;
+ serdes_seq_db[PEX_CONFIG_REF_CLOCK_40MHZ_SEQ].cfg_seq_size =
+ sizeof(pex_config_ref_clock40_m_hz) / sizeof(struct op_params);
+ serdes_seq_db[PEX_CONFIG_REF_CLOCK_40MHZ_SEQ].data_arr_idx = PEX;
+
+ /* PEX_CONFIG_REF_CLOCK_100MHZ_SEQ sequence init */
+ serdes_seq_db[PEX_CONFIG_REF_CLOCK_100MHZ_SEQ].op_params_ptr =
+ pex_config_ref_clock100_m_hz;
+ serdes_seq_db[PEX_CONFIG_REF_CLOCK_100MHZ_SEQ].cfg_seq_size =
+ sizeof(pex_config_ref_clock100_m_hz) / sizeof(struct op_params);
+ serdes_seq_db[PEX_CONFIG_REF_CLOCK_100MHZ_SEQ].data_arr_idx = PEX;
+
+ /* USB3_POWER_UP_SEQ sequence init */
+ if (serdes_rev == MV_SERDES_REV_1_2) {
+ serdes_seq_db[USB3_POWER_UP_SEQ].op_params_ptr =
+ pex_and_usb3_power_up_serdes_rev1_params;
+ serdes_seq_db[USB3_POWER_UP_SEQ].cfg_seq_size =
+ sizeof(pex_and_usb3_power_up_serdes_rev1_params) /
+ sizeof(struct op_params);
+ } else {
+ serdes_seq_db[USB3_POWER_UP_SEQ].op_params_ptr =
+ pex_and_usb3_power_up_serdes_rev2_params;
+ serdes_seq_db[USB3_POWER_UP_SEQ].cfg_seq_size =
+ sizeof(pex_and_usb3_power_up_serdes_rev2_params) /
+ sizeof(struct op_params);
+ }
+ serdes_seq_db[USB3_POWER_UP_SEQ].data_arr_idx = USB3;
+
+ /* USB3_HOST_SPEED_CONFIG_SEQ sequence init */
+ serdes_seq_db[USB3_HOST_SPEED_CONFIG_SEQ].op_params_ptr =
+ pex_and_usb3_speed_config_params;
+ serdes_seq_db[USB3_HOST_SPEED_CONFIG_SEQ].cfg_seq_size =
+ sizeof(pex_and_usb3_speed_config_params) / sizeof(struct op_params);
+ serdes_seq_db[USB3_HOST_SPEED_CONFIG_SEQ].data_arr_idx =
+ USB3SERDES_SPEED_5_GBPS_HOST;
+
+ /* USB3_DEVICE_SPEED_CONFIG_SEQ sequence init */
+ serdes_seq_db[USB3_DEVICE_SPEED_CONFIG_SEQ].op_params_ptr =
+ pex_and_usb3_speed_config_params;
+ serdes_seq_db[USB3_DEVICE_SPEED_CONFIG_SEQ].cfg_seq_size =
+ sizeof(pex_and_usb3_speed_config_params) / sizeof(struct op_params);
+ serdes_seq_db[USB3_DEVICE_SPEED_CONFIG_SEQ].data_arr_idx =
+ USB3SERDES_SPEED_5_GBPS_DEVICE;
+
+ /* USB3_ELECTRICAL_CONFIG_SEQ seq sequence init */
+ if (serdes_rev == MV_SERDES_REV_1_2) {
+ serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].op_params_ptr =
+ usb3_electrical_config_serdes_rev1_params;
+ serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].cfg_seq_size =
+ sizeof(usb3_electrical_config_serdes_rev1_params) /
+ sizeof(struct op_params);
+ } else {
+ serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].op_params_ptr =
+ usb3_electrical_config_serdes_rev2_params;
+ serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].cfg_seq_size =
+ sizeof(usb3_electrical_config_serdes_rev2_params) /
+ sizeof(struct op_params);
+ }
+ serdes_seq_db[USB3_ELECTRICAL_CONFIG_SEQ].data_arr_idx = USB3;
+
+ /* USB3_TX_CONFIG_SEQ sequence init */
+ serdes_seq_db[USB3_TX_CONFIG_SEQ1].op_params_ptr =
+ pex_and_usb3_tx_config_params1;
+ serdes_seq_db[USB3_TX_CONFIG_SEQ1].cfg_seq_size =
+ sizeof(pex_and_usb3_tx_config_params1) / sizeof(struct op_params);
+ serdes_seq_db[USB3_TX_CONFIG_SEQ1].data_arr_idx = USB3;
+
+ /* USB3_TX_CONFIG_SEQ sequence init */
+ serdes_seq_db[USB3_TX_CONFIG_SEQ2].op_params_ptr =
+ pex_and_usb3_tx_config_params2;
+ serdes_seq_db[USB3_TX_CONFIG_SEQ2].cfg_seq_size =
+ sizeof(pex_and_usb3_tx_config_params2) / sizeof(struct op_params);
+ serdes_seq_db[USB3_TX_CONFIG_SEQ2].data_arr_idx = USB3;
+
+ /* USB3_TX_CONFIG_SEQ sequence init */
+ serdes_seq_db[USB3_TX_CONFIG_SEQ3].op_params_ptr =
+ pex_and_usb3_tx_config_params3;
+ serdes_seq_db[USB3_TX_CONFIG_SEQ3].cfg_seq_size =
+ sizeof(pex_and_usb3_tx_config_params3) / sizeof(struct op_params);
+ serdes_seq_db[USB3_TX_CONFIG_SEQ3].data_arr_idx = USB3;
+
+ /* USB2_POWER_UP_SEQ sequence init */
+ serdes_seq_db[USB2_POWER_UP_SEQ].op_params_ptr = usb2_power_up_params;
+ serdes_seq_db[USB2_POWER_UP_SEQ].cfg_seq_size =
+ sizeof(usb2_power_up_params) / sizeof(struct op_params);
+ serdes_seq_db[USB2_POWER_UP_SEQ].data_arr_idx = 0;
+
+ /* USB3_DEVICE_CONFIG_SEQ sequence init */
+ serdes_seq_db[USB3_DEVICE_CONFIG_SEQ].op_params_ptr =
+ usb3_device_config_params;
+ serdes_seq_db[USB3_DEVICE_CONFIG_SEQ].cfg_seq_size =
+ sizeof(usb3_device_config_params) / sizeof(struct op_params);
+ serdes_seq_db[USB3_DEVICE_CONFIG_SEQ].data_arr_idx = 0; /* Not relevant */
+
+ /* SERDES_POWER_DOWN_SEQ sequence init */
+ serdes_seq_db[SERDES_POWER_DOWN_SEQ].op_params_ptr =
+ serdes_power_down_params;
+ serdes_seq_db[SERDES_POWER_DOWN_SEQ].cfg_seq_size =
+ sizeof(serdes_power_down_params) /
+ sizeof(struct op_params);
+ serdes_seq_db[SERDES_POWER_DOWN_SEQ].data_arr_idx = FIRST_CELL;
+
+ if (serdes_rev == MV_SERDES_REV_2_1) {
+ /* QSGMII_POWER_UP_SEQ sequence init */
+ serdes_seq_db[QSGMII_POWER_UP_SEQ].op_params_ptr =
+ qsgmii_port_power_up_params;
+ serdes_seq_db[QSGMII_POWER_UP_SEQ].cfg_seq_size =
+ sizeof(qsgmii_port_power_up_params) /
+ sizeof(struct op_params);
+ serdes_seq_db[QSGMII_POWER_UP_SEQ].data_arr_idx =
+ QSGMII_SEQ_IDX;
+
+ /* QSGMII_5_SPEED_CONFIG_SEQ sequence init */
+ serdes_seq_db[QSGMII_5_SPEED_CONFIG_SEQ].op_params_ptr =
+ qsgmii_port_speed_config_params;
+ serdes_seq_db[QSGMII_5_SPEED_CONFIG_SEQ].cfg_seq_size =
+ sizeof(qsgmii_port_speed_config_params) /
+ sizeof(struct op_params);
+ serdes_seq_db[QSGMII_5_SPEED_CONFIG_SEQ].data_arr_idx =
+ QSGMII_SEQ_IDX;
+
+ /* QSGMII_ELECTRICAL_CONFIG_SEQ seq sequence init */
+ serdes_seq_db[QSGMII_ELECTRICAL_CONFIG_SEQ].op_params_ptr =
+ qsgmii_port_electrical_config_params;
+ serdes_seq_db[QSGMII_ELECTRICAL_CONFIG_SEQ].cfg_seq_size =
+ sizeof(qsgmii_port_electrical_config_params) /
+ sizeof(struct op_params);
+ serdes_seq_db[QSGMII_ELECTRICAL_CONFIG_SEQ].data_arr_idx =
+ QSGMII_SEQ_IDX;
+
+ /* QSGMII_TX_CONFIG_SEQ sequence init */
+ serdes_seq_db[QSGMII_TX_CONFIG_SEQ1].op_params_ptr =
+ qsgmii_port_tx_config_params1;
+ serdes_seq_db[QSGMII_TX_CONFIG_SEQ1].cfg_seq_size =
+ sizeof(qsgmii_port_tx_config_params1) /
+ sizeof(struct op_params);
+ serdes_seq_db[QSGMII_TX_CONFIG_SEQ1].data_arr_idx =
+ QSGMII_SEQ_IDX;
+
+ /* QSGMII_TX_CONFIG_SEQ sequence init */
+ serdes_seq_db[QSGMII_TX_CONFIG_SEQ2].op_params_ptr =
+ qsgmii_port_tx_config_params2;
+ serdes_seq_db[QSGMII_TX_CONFIG_SEQ2].cfg_seq_size =
+ sizeof(qsgmii_port_tx_config_params2) /
+ sizeof(struct op_params);
+ serdes_seq_db[QSGMII_TX_CONFIG_SEQ2].data_arr_idx =
+ QSGMII_SEQ_IDX;
+ }
+
+ return MV_OK;
+}
+
+enum serdes_seq serdes_type_and_speed_to_speed_seq(enum serdes_type serdes_type,
+ enum serdes_speed baud_rate)
+{
+ enum serdes_seq seq_id = SERDES_LAST_SEQ;
+
+ DEBUG_INIT_FULL_S("\n### serdes_type_and_speed_to_speed_seq ###\n");
+ switch (serdes_type) {
+ case PEX0:
+ case PEX1:
+ case PEX2:
+ case PEX3:
+ if (baud_rate == SERDES_SPEED_2_5_GBPS)
+ seq_id = PEX_2_5_SPEED_CONFIG_SEQ;
+ else if (baud_rate == SERDES_SPEED_5_GBPS)
+ seq_id = PEX_5_SPEED_CONFIG_SEQ;
+ break;
+ case USB3_HOST0:
+ case USB3_HOST1:
+ if (baud_rate == SERDES_SPEED_5_GBPS)
+ seq_id = USB3_HOST_SPEED_CONFIG_SEQ;
+ break;
+ case USB3_DEVICE:
+ if (baud_rate == SERDES_SPEED_5_GBPS)
+ seq_id = USB3_DEVICE_SPEED_CONFIG_SEQ;
+ break;
+ case SATA0:
+ case SATA1:
+ case SATA2:
+ case SATA3:
+ if (baud_rate == SERDES_SPEED_1_5_GBPS)
+ seq_id = SATA_1_5_SPEED_CONFIG_SEQ;
+ else if (baud_rate == SERDES_SPEED_3_GBPS)
+ seq_id = SATA_3_SPEED_CONFIG_SEQ;
+ else if (baud_rate == SERDES_SPEED_6_GBPS)
+ seq_id = SATA_6_SPEED_CONFIG_SEQ;
+ break;
+ case SGMII0:
+ case SGMII1:
+ case SGMII2:
+#ifdef CONFIG_ARMADA_39X
+ case SGMII3:
+#endif
+ if (baud_rate == SERDES_SPEED_1_25_GBPS)
+ seq_id = SGMII_1_25_SPEED_CONFIG_SEQ;
+ else if (baud_rate == SERDES_SPEED_3_125_GBPS)
+ seq_id = SGMII_3_125_SPEED_CONFIG_SEQ;
+ break;
+ case QSGMII:
+ seq_id = QSGMII_5_SPEED_CONFIG_SEQ;
+ break;
+#ifdef CONFIG_ARMADA_39X
+ case XAUI:
+ seq_id = XAUI_3_125_SPEED_CONFIG_SEQ;
+ break;
+ case RXAUI:
+ seq_id = RXAUI_6_25_SPEED_CONFIG_SEQ;
+ break;
+#endif
+ default:
+ return SERDES_LAST_SEQ;
+ }
+
+ return seq_id;
+}
+
+/*
+ * This is the weak default function for the Marvell evaluation or
+ * development boarrds. Like the DB-88F6820-GP and others.
+ * Custom boards should define this function in their board
+ * code (board directory). And overwrite this default function
+ * with this custom specific code.
+ */
+__weak int hws_board_topology_load(struct serdes_map *serdes_map_array)
+{
+ u32 board_id = mv_board_id_get();
+ u32 board_id_index = mv_board_id_index_get(board_id);
+
+ DEBUG_INIT_FULL_S("\n### hws_board_topology_load ###\n");
+ /* getting board topology according to the board id */
+ DEBUG_INIT_FULL_S("Getting board topology according to the board id\n");
+
+ CHECK_STATUS(load_topology_func_arr[board_id_index] (serdes_map_array));
+
+ return MV_OK;
+}
+
+void print_topology_details(struct serdes_map *serdes_map_array)
+{
+ u32 lane_num;
+
+ DEBUG_INIT_S("board SerDes lanes topology details:\n");
+
+ DEBUG_INIT_S(" | Lane # | Speed | Type |\n");
+ DEBUG_INIT_S(" --------------------------------\n");
+ for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) {
+ if (serdes_map_array[lane_num].serdes_type == DEFAULT_SERDES)
+ continue;
+ DEBUG_INIT_S(" | ");
+ DEBUG_INIT_D(hws_get_physical_serdes_num(lane_num), 1);
+ DEBUG_INIT_S(" | ");
+ DEBUG_INIT_D(serdes_map_array[lane_num].serdes_speed, 2);
+ DEBUG_INIT_S(" | ");
+ DEBUG_INIT_S((char *)
+ serdes_type_to_string[serdes_map_array[lane_num].
+ serdes_type]);
+ DEBUG_INIT_S("\t|\n");
+ }
+ DEBUG_INIT_S(" --------------------------------\n");
+}
+
+int hws_pre_serdes_init_config(void)
+{
+ u32 data;
+
+ /*
+ * Configure Core PLL
+ */
+ /*
+ * set PLL parameters
+ * bits[2:0] =0x3 (Core-PLL Kdiv)
+ * bits[20:12]=0x9f (Core-PLL Ndiv)
+ * bits[24:21]=0x7(Core-PLL VCO Band)
+ * bits[28:25]=0x1(Core-PLL Rlf)
+ * bits[31:29]=0x2(Core-PLL charge-pump adjust)
+ */
+ reg_write(CORE_PLL_PARAMETERS_REG, 0x42e9f003);
+
+ /* Enable PLL Configuration */
+ data = reg_read(CORE_PLL_CONFIG_REG);
+ data = SET_BIT(data, 9);
+ reg_write(CORE_PLL_CONFIG_REG, data);
+
+ return MV_OK;
+}
+
+int serdes_phy_config(void)
+{
+ DEBUG_INIT_FULL_S("\n### ctrl_high_speed_serdes_phy_config ###\n");
+
+ DEBUG_INIT_S("High speed PHY - Version: ");
+ DEBUG_INIT_S(SERDES_VERION);
+ DEBUG_INIT_S("\n");
+
+ /* Init serdes sequences DB */
+ if (hws_serdes_seq_init() != MV_OK) {
+ printf("hws_ctrl_high_speed_serdes_phy_config: Error: Serdes initialization fail\n");
+ return MV_FAIL;
+ }
+
+ /* I2C init */
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+ /* Board topology load */
+ DEBUG_INIT_FULL_S
+ ("ctrl_high_speed_serdes_phy_config: Loading board topology..\n");
+ CHECK_STATUS(hws_board_topology_load(serdes_configuration_map));
+
+ /* print topology */
+ print_topology_details(serdes_configuration_map);
+ CHECK_STATUS(hws_pre_serdes_init_config());
+
+ /* Power-Up sequence */
+ DEBUG_INIT_FULL_S
+ ("ctrl_high_speed_serdes_phy_config: Starting serdes power up sequence\n");
+
+ CHECK_STATUS(hws_power_up_serdes_lanes(serdes_configuration_map));
+
+ DEBUG_INIT_FULL_S
+ ("\n### ctrl_high_speed_serdes_phy_config ended successfully ###\n");
+
+ DEBUG_INIT_S(ENDED_OK);
+
+ return MV_OK;
+}
+
+int serdes_polarity_config(u32 serdes_num, int is_rx)
+{
+ u32 data;
+ u32 reg_addr;
+ u8 bit_off = (is_rx) ? 11 : 10;
+
+ reg_addr = SERDES_REGS_LANE_BASE_OFFSET(serdes_num) + SYNC_PATTERN_REG;
+ data = reg_read(reg_addr);
+ data = SET_BIT(data, bit_off);
+ reg_write(reg_addr, data);
+
+ return MV_OK;
+}
+
+int hws_power_up_serdes_lanes(struct serdes_map *serdes_config_map)
+{
+ u32 serdes_id, serdes_lane_num;
+ enum ref_clock ref_clock;
+ enum serdes_type serdes_type;
+ enum serdes_speed serdes_speed;
+ enum serdes_mode serdes_mode;
+ int serdes_rx_polarity_swap;
+ int serdes_tx_polarity_swap;
+ int is_pex_enabled = 0;
+
+ /*
+ * is_pex_enabled:
+ * Flag which indicates that one of the Serdes is of PEX.
+ * In this case, PEX unit will be initialized after Serdes power-up
+ */
+
+ DEBUG_INIT_FULL_S("\n### hws_power_up_serdes_lanes ###\n");
+
+ /* COMMON PHYS SELECTORS register configuration */
+ DEBUG_INIT_FULL_S
+ ("hws_power_up_serdes_lanes: Updating COMMON PHYS SELECTORS reg\n");
+ CHECK_STATUS(hws_update_serdes_phy_selectors(serdes_configuration_map));
+
+ /* per Serdes Power Up */
+ for (serdes_id = 0; serdes_id < hws_serdes_get_max_lane();
+ serdes_id++) {
+ DEBUG_INIT_FULL_S
+ ("calling serdes_power_up_ctrl: serdes lane number ");
+ DEBUG_INIT_FULL_D_10(serdes_lane_num, 1);
+ DEBUG_INIT_FULL_S("\n");
+
+ serdes_lane_num = hws_get_physical_serdes_num(serdes_id);
+ serdes_type = serdes_config_map[serdes_id].serdes_type;
+ serdes_speed = serdes_config_map[serdes_id].serdes_speed;
+ serdes_mode = serdes_config_map[serdes_id].serdes_mode;
+ serdes_rx_polarity_swap = serdes_config_map[serdes_id].swap_rx;
+ serdes_tx_polarity_swap = serdes_config_map[serdes_id].swap_tx;
+
+ /* serdes lane is not in use */
+ if (serdes_type == DEFAULT_SERDES)
+ continue;
+ else if (serdes_type <= PEX3) /* PEX type */
+ is_pex_enabled = 1;
+
+ ref_clock = hws_serdes_get_ref_clock_val(serdes_type);
+ if (ref_clock == REF_CLOCK_UNSUPPORTED) {
+ DEBUG_INIT_S
+ ("hws_power_up_serdes_lanes: unsupported ref clock\n");
+ return MV_NOT_SUPPORTED;
+ }
+ CHECK_STATUS(serdes_power_up_ctrl(serdes_lane_num,
+ 1,
+ serdes_type,
+ serdes_speed,
+ serdes_mode, ref_clock));
+
+ /* RX Polarity config */
+ if (serdes_rx_polarity_swap)
+ CHECK_STATUS(serdes_polarity_config
+ (serdes_lane_num, 1));
+
+ /* TX Polarity config */
+ if (serdes_tx_polarity_swap)
+ CHECK_STATUS(serdes_polarity_config
+ (serdes_lane_num, 0));
+ }
+
+ if (is_pex_enabled) {
+ /* Set PEX_TX_CONFIG_SEQ sequence for PEXx4 mode.
+ After finish the Power_up sequence for all lanes,
+ the lanes should be released from reset state. */
+ CHECK_STATUS(hws_pex_tx_config_seq(serdes_config_map));
+
+ /* PEX configuration */
+ CHECK_STATUS(hws_pex_config(serdes_config_map));
+ }
+
+ /* USB2 configuration */
+ DEBUG_INIT_FULL_S("hws_power_up_serdes_lanes: init USB2 Phys\n");
+ CHECK_STATUS(mv_seq_exec(0 /* not relevant */ , USB2_POWER_UP_SEQ));
+
+ DEBUG_INIT_FULL_S
+ ("### hws_power_up_serdes_lanes ended successfully ###\n");
+
+ return MV_OK;
+}
+
+int ctrl_high_speed_serdes_phy_config(void)
+{
+ return hws_ctrl_high_speed_serdes_phy_config();
+}
+
+static int serdes_pex_usb3_pipe_delay_w_a(u32 serdes_num, u8 serdes_type)
+{
+ u32 reg_data;
+
+ /* WA for A380 Z1 relevant for lanes 3,4,5 only */
+ if (serdes_num >= 3) {
+ reg_data = reg_read(GENERAL_PURPOSE_RESERVED0_REG);
+ /* set delay on pipe -
+ * When lane 3 is connected to a MAC of Pex -> set bit 7 to 1.
+ * When lane 3 is connected to a MAC of USB3 -> set bit 7 to 0.
+ * When lane 4 is connected to a MAC of Pex -> set bit 8 to 1.
+ * When lane 4 is connected to a MAC of USB3 -> set bit 8 to 0.
+ * When lane 5 is connected to a MAC of Pex -> set bit 8 to 1.
+ * When lane 5 is connected to a MAC of USB3 -> set bit 8 to 0.
+ */
+ if (serdes_type == PEX)
+ reg_data |= 1 << (7 + (serdes_num - 3));
+ if (serdes_type == USB3) {
+ /* USB3 */
+ reg_data &= ~(1 << (7 + (serdes_num - 3)));
+ }
+ reg_write(GENERAL_PURPOSE_RESERVED0_REG, reg_data);
+ }
+
+ return MV_OK;
+}
+
+/*
+ * hws_serdes_pex_ref_clock_satr_get -
+ *
+ * DESCRIPTION: Get the reference clock value from DEVICE_SAMPLE_AT_RESET1_REG
+ * and check:
+ * bit[2] for PEX#0, bit[3] for PEX#1, bit[30] for PEX#2, bit[31]
+ * for PEX#3.
+ * If bit=0 --> REF_CLOCK_100MHz
+ * If bit=1 && DEVICE_SAMPLE_AT_RESET2_REG bit[0]=0
+ * --> REF_CLOCK_25MHz
+ * If bit=1 && DEVICE_SAMPLE_AT_RESET2_REG bit[0]=1
+ * --> REF_CLOCK_40MHz
+ *
+ * INPUT: serdes_type - Type of Serdes
+ *
+ * OUTPUT: pex_satr - Return the REF_CLOCK value:
+ * REF_CLOCK_25MHz, REF_CLOCK_40MHz or REF_CLOCK_100MHz
+ *
+ * RETURNS: MV_OK - for success
+ * MV_BAD_PARAM - for fail
+ */
+int hws_serdes_pex_ref_clock_satr_get(enum serdes_type serdes_type, u32 *pex_satr)
+{
+ u32 data, reg_satr1;
+
+ reg_satr1 = reg_read(DEVICE_SAMPLE_AT_RESET1_REG);
+
+ switch (serdes_type) {
+ case PEX0:
+ data = REF_CLK_SELECTOR_VAL_PEX0(reg_satr1);
+ break;
+ case PEX1:
+ data = REF_CLK_SELECTOR_VAL_PEX1(reg_satr1);
+ break;
+ case PEX2:
+ data = REF_CLK_SELECTOR_VAL_PEX2(reg_satr1);
+ break;
+ case PEX3:
+ data = REF_CLK_SELECTOR_VAL_PEX3(reg_satr1);
+ break;
+ default:
+ printf("%s: Error: SerDes type %d is not supported\n",
+ __func__, serdes_type);
+ return MV_BAD_PARAM;
+ }
+
+ *pex_satr = data;
+
+ return MV_OK;
+}
+
+u32 hws_serdes_get_ref_clock_val(enum serdes_type serdes_type)
+{
+ u32 pex_satr;
+ enum ref_clock ref_clock;
+
+ DEBUG_INIT_FULL_S("\n### hws_serdes_get_ref_clock_val ###\n");
+
+ if (serdes_type >= LAST_SERDES_TYPE)
+ return REF_CLOCK_UNSUPPORTED;
+
+ /* read ref clock from S@R */
+ ref_clock = hws_serdes_silicon_ref_clock_get();
+
+ if (serdes_type > PEX3) {
+ /* for all Serdes types but PCIe */
+ return ref_clock;
+ }
+
+ /* for PCIe, need also to check PCIe S@R */
+ CHECK_STATUS(hws_serdes_pex_ref_clock_satr_get
+ (serdes_type, &pex_satr));
+
+ if (pex_satr == 0) {
+ return REF_CLOCK_100MHZ;
+ } else if (pex_satr == 1) {
+ /* value of 1 means we can use ref clock from SoC (as other Serdes types) */
+ return ref_clock;
+ } else {
+ printf
+ ("%s: Error: REF_CLK_SELECTOR_VAL for SerDes type %d is wrong\n",
+ __func__, serdes_type);
+ return REF_CLOCK_UNSUPPORTED;
+ }
+}
+
+int serdes_power_up_ctrl(u32 serdes_num, int serdes_power_up,
+ enum serdes_type serdes_type,
+ enum serdes_speed baud_rate,
+ enum serdes_mode serdes_mode, enum ref_clock ref_clock)
+{
+ u32 sata_idx, pex_idx, sata_port;
+ enum serdes_seq speed_seq_id;
+ u32 reg_data;
+ int is_pex_by1;
+
+ DEBUG_INIT_FULL_S("\n### serdes_power_up_ctrl ###\n");
+
+ if (serdes_power_up == 1) { /* Serdes power up */
+ DEBUG_INIT_FULL_S
+ ("serdes_power_up_ctrl: executing power up.. ");
+ DEBUG_INIT_FULL_C("serdes num = ", serdes_num, 2);
+ DEBUG_INIT_FULL_C("serdes type = ", serdes_type, 2);
+
+ DEBUG_INIT_FULL_S("Going access 1");
+
+ /* Getting the Speed Select sequence id */
+ speed_seq_id =
+ serdes_type_and_speed_to_speed_seq(serdes_type,
+ baud_rate);
+ if (speed_seq_id == SERDES_LAST_SEQ) {
+ printf
+ ("serdes_power_up_ctrl: serdes type %d and speed %d are not supported together\n",
+ serdes_type, baud_rate);
+
+ return MV_BAD_PARAM;
+ }
+
+ /* Executing power up, ref clock set, speed config and TX config */
+ switch (serdes_type) {
+ case PEX0:
+ case PEX1:
+ case PEX2:
+ case PEX3:
+ if (hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2) {
+ CHECK_STATUS(serdes_pex_usb3_pipe_delay_w_a
+ (serdes_num, PEX));
+ }
+
+ is_pex_by1 = (serdes_mode == PEX_ROOT_COMPLEX_X1) ||
+ (serdes_mode == PEX_END_POINT_X1);
+ pex_idx = serdes_type - PEX0;
+
+ if ((is_pex_by1 == 1) || (serdes_type == PEX0)) {
+ /* For PEX by 4, init only the PEX 0 */
+ reg_data = reg_read(SOC_CONTROL_REG1);
+ if (is_pex_by1 == 1)
+ reg_data |= 0x4000;
+ else
+ reg_data &= ~0x4000;
+ reg_write(SOC_CONTROL_REG1, reg_data);
+
+ reg_data =
+ reg_read(((PEX_IF_REGS_BASE(pex_idx)) +
+ 0x6c));
+ reg_data &= ~0x3f0;
+ if (is_pex_by1 == 1)
+ reg_data |= 0x10;
+ else
+ reg_data |= 0x40;
+ reg_write(((PEX_IF_REGS_BASE(pex_idx)) + 0x6c),
+ reg_data);
+
+ reg_data =
+ reg_read(((PEX_IF_REGS_BASE(pex_idx)) +
+ 0x6c));
+ reg_data &= ~0xf;
+ reg_data |= 0x2;
+ reg_write(((PEX_IF_REGS_BASE(pex_idx)) + 0x6c),
+ reg_data);
+
+ reg_data =
+ reg_read(((PEX_IF_REGS_BASE(pex_idx)) +
+ 0x70));
+ reg_data &= ~0x40;
+ reg_data |= 0x40;
+ reg_write(((PEX_IF_REGS_BASE(pex_idx)) + 0x70),
+ reg_data);
+ }
+
+ CHECK_STATUS(mv_seq_exec(serdes_num, PEX_POWER_UP_SEQ));
+ if (is_pex_by1 == 0) {
+ /*
+ * for PEX by 4 - use the PEX index as the
+ * seq array index
+ */
+ serdes_seq_db[PEX_BY_4_CONFIG_SEQ].
+ data_arr_idx = pex_idx;
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, PEX_BY_4_CONFIG_SEQ));
+ }
+
+ CHECK_STATUS(hws_ref_clock_set
+ (serdes_num, serdes_type, ref_clock));
+ CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id));
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, PEX_ELECTRICAL_CONFIG_SEQ));
+
+ if (is_pex_by1 == 1) {
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, PEX_TX_CONFIG_SEQ2));
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, PEX_TX_CONFIG_SEQ3));
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, PEX_TX_CONFIG_SEQ1));
+ }
+ udelay(20);
+
+ break;
+ case USB3_HOST0:
+ case USB3_HOST1:
+ case USB3_DEVICE:
+ if (hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2) {
+ CHECK_STATUS(serdes_pex_usb3_pipe_delay_w_a
+ (serdes_num, USB3));
+ }
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, USB3_POWER_UP_SEQ));
+ CHECK_STATUS(hws_ref_clock_set
+ (serdes_num, serdes_type, ref_clock));
+ CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id));
+ if (serdes_type == USB3_DEVICE) {
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num,
+ USB3_DEVICE_CONFIG_SEQ));
+ }
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, USB3_ELECTRICAL_CONFIG_SEQ));
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, USB3_TX_CONFIG_SEQ1));
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, USB3_TX_CONFIG_SEQ2));
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, USB3_TX_CONFIG_SEQ3));
+
+ udelay(10000);
+ break;
+ case SATA0:
+ case SATA1:
+ case SATA2:
+ case SATA3:
+ sata_idx = ((serdes_type == SATA0) ||
+ (serdes_type == SATA1)) ? 0 : 1;
+ sata_port = ((serdes_type == SATA0) ||
+ (serdes_type == SATA2)) ? 0 : 1;
+
+ CHECK_STATUS(mv_seq_exec
+ (sata_idx, (sata_port == 0) ?
+ SATA_PORT_0_ONLY_POWER_UP_SEQ :
+ SATA_PORT_1_ONLY_POWER_UP_SEQ));
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, SATA_POWER_UP_SEQ));
+ CHECK_STATUS(hws_ref_clock_set
+ (serdes_num, serdes_type, ref_clock));
+ CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id));
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, SATA_ELECTRICAL_CONFIG_SEQ));
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, SATA_TX_CONFIG_SEQ1));
+ CHECK_STATUS(mv_seq_exec
+ (sata_idx, (sata_port == 0) ?
+ SATA_PORT_0_ONLY_TX_CONFIG_SEQ :
+ SATA_PORT_1_ONLY_TX_CONFIG_SEQ));
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, SATA_TX_CONFIG_SEQ2));
+
+ udelay(10000);
+ break;
+ case SGMII0:
+ case SGMII1:
+ case SGMII2:
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, SGMII_POWER_UP_SEQ));
+ CHECK_STATUS(hws_ref_clock_set
+ (serdes_num, serdes_type, ref_clock));
+ CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id));
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, SGMII_ELECTRICAL_CONFIG_SEQ));
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, SGMII_TX_CONFIG_SEQ1));
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, SGMII_TX_CONFIG_SEQ2));
+
+ /* GBE configuration */
+ reg_data = reg_read(GBE_CONFIGURATION_REG);
+ /* write the SGMII index */
+ reg_data |= 0x1 << (serdes_type - SGMII0);
+ reg_write(GBE_CONFIGURATION_REG, reg_data);
+
+ break;
+ case QSGMII:
+ if (hws_ctrl_serdes_rev_get() < MV_SERDES_REV_2_1)
+ return MV_NOT_SUPPORTED;
+
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, QSGMII_POWER_UP_SEQ));
+ CHECK_STATUS(hws_ref_clock_set
+ (serdes_num, serdes_type, ref_clock));
+ CHECK_STATUS(mv_seq_exec(serdes_num, speed_seq_id));
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num,
+ QSGMII_ELECTRICAL_CONFIG_SEQ));
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, QSGMII_TX_CONFIG_SEQ1));
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num, QSGMII_TX_CONFIG_SEQ2));
+ break;
+ case SGMII3:
+ case XAUI:
+ case RXAUI:
+ CHECK_STATUS(serdes_power_up_ctrl_ext
+ (serdes_num, serdes_power_up, serdes_type,
+ baud_rate, serdes_mode, ref_clock));
+ break;
+ default:
+ DEBUG_INIT_S
+ ("serdes_power_up_ctrl: bad serdes_type parameter\n");
+ return MV_BAD_PARAM;
+ }
+ } else { /* Serdes power down */
+ DEBUG_INIT_FULL_S("serdes_power_up: executing power down.. ");
+ DEBUG_INIT_FULL_C("serdes num = ", serdes_num, 1);
+
+ CHECK_STATUS(mv_seq_exec(serdes_num, SERDES_POWER_DOWN_SEQ));
+ }
+
+ DEBUG_INIT_FULL_C(
+ "serdes_power_up_ctrl ended successfully for serdes ",
+ serdes_num, 2);
+
+ return MV_OK;
+}
+
+int hws_update_serdes_phy_selectors(struct serdes_map *serdes_config_map)
+{
+ u32 lane_data, idx, serdes_lane_hw_num, reg_data = 0;
+ enum serdes_type serdes_type;
+ enum serdes_mode serdes_mode;
+ u8 select_bit_off;
+ int is_pex_x4 = 0;
+ int updated_topology_print = 0;
+
+ DEBUG_INIT_FULL_S("\n### hws_update_serdes_phy_selectors ###\n");
+ DEBUG_INIT_FULL_S
+ ("Updating the COMMON PHYS SELECTORS register with the serdes types\n");
+
+ if (hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2)
+ select_bit_off = 3;
+ else
+ select_bit_off = 4;
+
+ /*
+ * Updating bits 0-17 in the COMMON PHYS SELECTORS register
+ * according to the serdes types
+ */
+ for (idx = 0; idx < hws_serdes_get_max_lane();
+ idx++) {
+ serdes_type = serdes_config_map[idx].serdes_type;
+ serdes_mode = serdes_config_map[idx].serdes_mode;
+ serdes_lane_hw_num = hws_get_physical_serdes_num(idx);
+
+ lane_data =
+ hws_serdes_get_phy_selector_val(serdes_lane_hw_num,
+ serdes_type);
+
+ if (serdes_type == DEFAULT_SERDES)
+ continue;
+
+ if (hws_serdes_topology_verify
+ (serdes_type, idx, serdes_mode) != MV_OK) {
+ serdes_config_map[idx].serdes_type =
+ DEFAULT_SERDES;
+ printf("%s: SerDes lane #%d is disabled\n", __func__,
+ serdes_lane_hw_num);
+ updated_topology_print = 1;
+ continue;
+ }
+
+ /*
+ * Checking if the board topology configuration includes
+ * PEXx4 - for the next step
+ */
+ if ((serdes_mode == PEX_END_POINT_X4) ||
+ (serdes_mode == PEX_ROOT_COMPLEX_X4)) {
+ /* update lane data to the 3 next SERDES lanes */
+ lane_data =
+ common_phys_selectors_pex_by4_lanes
+ [serdes_lane_hw_num];
+ if (serdes_type == PEX0)
+ is_pex_x4 = 1;
+ }
+
+ if (lane_data == NA) {
+ printf
+ ("%s: Warning: SerDes lane #%d and type %d are not supported together\n",
+ __func__, serdes_lane_hw_num, serdes_mode);
+ serdes_config_map[idx].serdes_type =
+ DEFAULT_SERDES;
+ printf("%s: SerDes lane #%d is disabled\n", __func__,
+ serdes_lane_hw_num);
+ continue;
+ }
+
+ /*
+ * Updating the data that will be written to
+ * COMMON_PHYS_SELECTORS_REG
+ */
+ reg_data |= (lane_data <<
+ (select_bit_off * serdes_lane_hw_num));
+ }
+
+ /*
+ * Check that number of used lanes for XAUI and RXAUI
+ * (if used) is right
+ */
+ hws_serdes_xaui_topology_verify();
+
+ /* Print topology */
+ if (updated_topology_print)
+ print_topology_details(serdes_config_map);
+
+ /*
+ * Updating the PEXx4 Enable bit in the COMMON PHYS SELECTORS
+ * register for PEXx4 mode
+ */
+ reg_data |= (is_pex_x4 == 1) ? (0x1 << PEX_X4_ENABLE_OFFS) : 0;
+
+ /* Updating the COMMON PHYS SELECTORS register */
+ reg_write(COMMON_PHYS_SELECTORS_REG, reg_data);
+
+ return MV_OK;
+}
+
+int hws_ref_clock_set(u32 serdes_num, enum serdes_type serdes_type,
+ enum ref_clock ref_clock)
+{
+ u32 data1 = 0, data2 = 0, data3 = 0, reg_data;
+
+ DEBUG_INIT_FULL_S("\n### hws_ref_clock_set ###\n");
+
+ if (hws_is_serdes_active(serdes_num) != 1) {
+ printf("%s: SerDes lane #%d is not Active\n", __func__,
+ serdes_num);
+ return MV_BAD_PARAM;
+ }
+
+ switch (serdes_type) {
+ case PEX0:
+ case PEX1:
+ case PEX2:
+ case PEX3:
+ switch (ref_clock) {
+ case REF_CLOCK_25MHZ:
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num,
+ PEX_CONFIG_REF_CLOCK_25MHZ_SEQ));
+ return MV_OK;
+ case REF_CLOCK_100MHZ:
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num,
+ PEX_CONFIG_REF_CLOCK_100MHZ_SEQ));
+ return MV_OK;
+#ifdef CONFIG_ARMADA_39X
+ case REF_CLOCK_40MHZ:
+ CHECK_STATUS(mv_seq_exec
+ (serdes_num,
+ PEX_CONFIG_REF_CLOCK_40MHZ_SEQ));
+ return MV_OK;
+#endif
+ default:
+ printf
+ ("%s: Error: ref_clock %d for SerDes lane #%d, type %d is not supported\n",
+ __func__, ref_clock, serdes_num, serdes_type);
+ return MV_BAD_PARAM;
+ }
+ case USB3_HOST0:
+ case USB3_HOST1:
+ case USB3_DEVICE:
+ if (ref_clock == REF_CLOCK_25MHZ) {
+ data1 = POWER_AND_PLL_CTRL_REG_25MHZ_VAL_2;
+ data2 = GLOBAL_PM_CTRL_REG_25MHZ_VAL;
+ data3 = LANE_CFG4_REG_25MHZ_VAL;
+ } else if (ref_clock == REF_CLOCK_40MHZ) {
+ data1 = POWER_AND_PLL_CTRL_REG_40MHZ_VAL;
+ data2 = GLOBAL_PM_CTRL_REG_40MHZ_VAL;
+ data3 = LANE_CFG4_REG_40MHZ_VAL;
+ } else {
+ printf
+ ("hws_ref_clock_set: ref clock is not valid for serdes type %d\n",
+ serdes_type);
+ return MV_BAD_PARAM;
+ }
+ break;
+ case SATA0:
+ case SATA1:
+ case SATA2:
+ case SATA3:
+ case SGMII0:
+ case SGMII1:
+ case SGMII2:
+ case QSGMII:
+ if (ref_clock == REF_CLOCK_25MHZ) {
+ data1 = POWER_AND_PLL_CTRL_REG_25MHZ_VAL_1;
+ } else if (ref_clock == REF_CLOCK_40MHZ) {
+ data1 = POWER_AND_PLL_CTRL_REG_40MHZ_VAL;
+ } else {
+ printf
+ ("hws_ref_clock_set: ref clock is not valid for serdes type %d\n",
+ serdes_type);
+ return MV_BAD_PARAM;
+ }
+ break;
+#ifdef CONFIG_ARMADA_39X
+ case SGMII3:
+ case XAUI:
+ case RXAUI:
+ if (ref_clock == REF_CLOCK_25MHZ) {
+ data1 = POWER_AND_PLL_CTRL_REG_25MHZ_VAL_1;
+ } else if (ref_clock == REF_CLOCK_40MHZ) {
+ data1 = POWER_AND_PLL_CTRL_REG_40MHZ_VAL;
+ } else {
+ printf
+ ("hws_ref_clock_set: ref clock is not valid for serdes type %d\n",
+ serdes_type);
+ return MV_BAD_PARAM;
+ }
+ break;
+#endif
+ default:
+ DEBUG_INIT_S("hws_ref_clock_set: not supported serdes type\n");
+ return MV_BAD_PARAM;
+ }
+
+ /*
+ * Write the ref_clock to relevant SELECT_REF_CLOCK_REG bits and
+ * offset
+ */
+ reg_data = reg_read(POWER_AND_PLL_CTRL_REG +
+ SERDES_REGS_LANE_BASE_OFFSET(serdes_num));
+ reg_data &= POWER_AND_PLL_CTRL_REG_MASK;
+ reg_data |= data1;
+ reg_write(POWER_AND_PLL_CTRL_REG +
+ SERDES_REGS_LANE_BASE_OFFSET(serdes_num), reg_data);
+
+ if ((serdes_type == USB3_HOST0) || (serdes_type == USB3_HOST1) ||
+ (serdes_type == USB3_DEVICE)) {
+ reg_data = reg_read(GLOBAL_PM_CTRL +
+ SERDES_REGS_LANE_BASE_OFFSET(serdes_num));
+ reg_data &= GLOBAL_PM_CTRL_REG_MASK;
+ reg_data |= data2;
+ reg_write(GLOBAL_PM_CTRL +
+ SERDES_REGS_LANE_BASE_OFFSET(serdes_num), reg_data);
+
+ reg_data = reg_read(LANE_CFG4_REG +
+ SERDES_REGS_LANE_BASE_OFFSET(serdes_num));
+ reg_data &= LANE_CFG4_REG_MASK;
+ reg_data |= data3;
+ reg_write(LANE_CFG4_REG +
+ SERDES_REGS_LANE_BASE_OFFSET(serdes_num), reg_data);
+ }
+
+ return MV_OK;
+}
+
+/*
+ * hws_pex_tx_config_seq -
+ *
+ * DESCRIPTION: Set PEX_TX_CONFIG_SEQ sequence init for PEXx4 mode
+ * INPUT: serdes_map - The board topology map
+ * OUTPUT: None
+ * RETURNS: MV_OK - for success
+ * MV_BAD_PARAM - for fail
+ */
+int hws_pex_tx_config_seq(struct serdes_map *serdes_map)
+{
+ enum serdes_mode serdes_mode;
+ u32 serdes_lane_id, serdes_lane_hw_num;
+
+ DEBUG_INIT_FULL_S("\n### hws_pex_tx_config_seq ###\n");
+
+ /*
+ * For PEXx4: the pex_and_usb3_tx_config_params1/2/3
+ * configurations should run by setting each sequence for
+ * all 4 lanes.
+ */
+
+ /* relese pipe soft reset for all lanes */
+ for (serdes_lane_id = 0; serdes_lane_id < hws_serdes_get_max_lane();
+ serdes_lane_id++) {
+ serdes_mode = serdes_map[serdes_lane_id].serdes_mode;
+ serdes_lane_hw_num =
+ hws_get_physical_serdes_num(serdes_lane_id);
+
+ if ((serdes_mode == PEX_ROOT_COMPLEX_X4) ||
+ (serdes_mode == PEX_END_POINT_X4)) {
+ CHECK_STATUS(mv_seq_exec
+ (serdes_lane_hw_num, PEX_TX_CONFIG_SEQ1));
+ }
+ }
+
+ /* set phy soft reset for all lanes */
+ for (serdes_lane_id = 0; serdes_lane_id < hws_serdes_get_max_lane();
+ serdes_lane_id++) {
+ serdes_mode = serdes_map[serdes_lane_id].serdes_mode;
+ serdes_lane_hw_num =
+ hws_get_physical_serdes_num(serdes_lane_id);
+ if ((serdes_mode == PEX_ROOT_COMPLEX_X4) ||
+ (serdes_mode == PEX_END_POINT_X4)) {
+ CHECK_STATUS(mv_seq_exec
+ (serdes_lane_hw_num, PEX_TX_CONFIG_SEQ2));
+ }
+ }
+
+ /* set phy soft reset for all lanes */
+ for (serdes_lane_id = 0; serdes_lane_id < hws_serdes_get_max_lane();
+ serdes_lane_id++) {
+ serdes_mode = serdes_map[serdes_lane_id].serdes_mode;
+ serdes_lane_hw_num =
+ hws_get_physical_serdes_num(serdes_lane_id);
+ if ((serdes_mode == PEX_ROOT_COMPLEX_X4) ||
+ (serdes_mode == PEX_END_POINT_X4)) {
+ CHECK_STATUS(mv_seq_exec
+ (serdes_lane_hw_num, PEX_TX_CONFIG_SEQ3));
+ }
+ }
+
+ return MV_OK;
+}
diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h
new file mode 100644
index 0000000..2508721
--- /dev/null
+++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h
@@ -0,0 +1,251 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _HIGH_SPEED_ENV_SPEC_H
+#define _HIGH_SPEED_ENV_SPEC_H
+
+#include "seq_exec.h"
+
+/*
+ * For setting or clearing a certain bit (bit is a number between 0 and 31)
+ * in the data
+ */
+#define SET_BIT(data, bit) ((data) | (0x1 << (bit)))
+#define CLEAR_BIT(data, bit) ((data) & (~(0x1 << (bit))))
+
+#define MAX_SERDES_LANES 7 /* as in a39x */
+
+/* Serdes revision */
+/* Serdes revision 1.2 (for A38x-Z1) */
+#define MV_SERDES_REV_1_2 0x0
+/* Serdes revision 2.1 (for A39x-Z1, A38x-A0) */
+#define MV_SERDES_REV_2_1 0x1
+#define MV_SERDES_REV_NA 0xff
+
+#define SERDES_REGS_LANE_BASE_OFFSET(lane) (0x800 * (lane))
+
+#define PEX_X4_ENABLE_OFFS \
+ (hws_ctrl_serdes_rev_get() == MV_SERDES_REV_1_2 ? 18 : 31)
+
+/* Serdes lane types */
+enum serdes_type {
+ PEX0,
+ PEX1,
+ PEX2,
+ PEX3,
+ SATA0,
+ SATA1,
+ SATA2,
+ SATA3,
+ SGMII0,
+ SGMII1,
+ SGMII2,
+ QSGMII,
+ USB3_HOST0,
+ USB3_HOST1,
+ USB3_DEVICE,
+ SGMII3,
+ XAUI,
+ RXAUI,
+ DEFAULT_SERDES,
+ LAST_SERDES_TYPE
+};
+
+/* Serdes baud rates */
+enum serdes_speed {
+ SERDES_SPEED_1_25_GBPS,
+ SERDES_SPEED_1_5_GBPS,
+ SERDES_SPEED_2_5_GBPS,
+ SERDES_SPEED_3_GBPS,
+ SERDES_SPEED_3_125_GBPS,
+ SERDES_SPEED_5_GBPS,
+ SERDES_SPEED_6_GBPS,
+ SERDES_SPEED_6_25_GBPS,
+ LAST_SERDES_SPEED
+};
+
+/* Serdes modes */
+enum serdes_mode {
+ PEX_ROOT_COMPLEX_X1,
+ PEX_ROOT_COMPLEX_X4,
+ PEX_END_POINT_X1,
+ PEX_END_POINT_X4,
+
+ SERDES_DEFAULT_MODE, /* not pex */
+
+ SERDES_LAST_MODE
+};
+
+struct serdes_map {
+ enum serdes_type serdes_type;
+ enum serdes_speed serdes_speed;
+ enum serdes_mode serdes_mode;
+ int swap_rx;
+ int swap_tx;
+};
+
+/* Serdes ref clock options */
+enum ref_clock {
+ REF_CLOCK_25MHZ,
+ REF_CLOCK_100MHZ,
+ REF_CLOCK_40MHZ,
+ REF_CLOCK_UNSUPPORTED
+};
+
+/* Serdes sequences */
+enum serdes_seq {
+ SATA_PORT_0_ONLY_POWER_UP_SEQ,
+ SATA_PORT_1_ONLY_POWER_UP_SEQ,
+ SATA_POWER_UP_SEQ,
+ SATA_1_5_SPEED_CONFIG_SEQ,
+ SATA_3_SPEED_CONFIG_SEQ,
+ SATA_6_SPEED_CONFIG_SEQ,
+ SATA_ELECTRICAL_CONFIG_SEQ,
+ SATA_TX_CONFIG_SEQ1,
+ SATA_PORT_0_ONLY_TX_CONFIG_SEQ,
+ SATA_PORT_1_ONLY_TX_CONFIG_SEQ,
+ SATA_TX_CONFIG_SEQ2,
+
+ SGMII_POWER_UP_SEQ,
+ SGMII_1_25_SPEED_CONFIG_SEQ,
+ SGMII_3_125_SPEED_CONFIG_SEQ,
+ SGMII_ELECTRICAL_CONFIG_SEQ,
+ SGMII_TX_CONFIG_SEQ1,
+ SGMII_TX_CONFIG_SEQ2,
+
+ PEX_POWER_UP_SEQ,
+ PEX_2_5_SPEED_CONFIG_SEQ,
+ PEX_5_SPEED_CONFIG_SEQ,
+ PEX_ELECTRICAL_CONFIG_SEQ,
+ PEX_TX_CONFIG_SEQ1,
+ PEX_TX_CONFIG_SEQ2,
+ PEX_TX_CONFIG_SEQ3,
+ PEX_BY_4_CONFIG_SEQ,
+ PEX_CONFIG_REF_CLOCK_25MHZ_SEQ,
+ PEX_CONFIG_REF_CLOCK_100MHZ_SEQ,
+ PEX_CONFIG_REF_CLOCK_40MHZ_SEQ,
+
+ USB3_POWER_UP_SEQ,
+ USB3_HOST_SPEED_CONFIG_SEQ,
+ USB3_DEVICE_SPEED_CONFIG_SEQ,
+ USB3_ELECTRICAL_CONFIG_SEQ,
+ USB3_TX_CONFIG_SEQ1,
+ USB3_TX_CONFIG_SEQ2,
+ USB3_TX_CONFIG_SEQ3,
+ USB3_DEVICE_CONFIG_SEQ,
+
+ USB2_POWER_UP_SEQ,
+
+ SERDES_POWER_DOWN_SEQ,
+
+ SGMII3_POWER_UP_SEQ,
+ SGMII3_1_25_SPEED_CONFIG_SEQ,
+ SGMII3_TX_CONFIG_SEQ1,
+ SGMII3_TX_CONFIG_SEQ2,
+
+ QSGMII_POWER_UP_SEQ,
+ QSGMII_5_SPEED_CONFIG_SEQ,
+ QSGMII_ELECTRICAL_CONFIG_SEQ,
+ QSGMII_TX_CONFIG_SEQ1,
+ QSGMII_TX_CONFIG_SEQ2,
+
+ XAUI_POWER_UP_SEQ,
+ XAUI_3_125_SPEED_CONFIG_SEQ,
+ XAUI_ELECTRICAL_CONFIG_SEQ,
+ XAUI_TX_CONFIG_SEQ1,
+ XAUI_TX_CONFIG_SEQ2,
+
+ RXAUI_POWER_UP_SEQ,
+ RXAUI_6_25_SPEED_CONFIG_SEQ,
+ RXAUI_ELECTRICAL_CONFIG_SEQ,
+ RXAUI_TX_CONFIG_SEQ1,
+ RXAUI_TX_CONFIG_SEQ2,
+
+ SERDES_LAST_SEQ
+};
+
+/* The different sequence types for PEX and USB3 */
+enum {
+ PEX,
+ USB3,
+ LAST_PEX_USB_SEQ_TYPE
+};
+
+enum {
+ PEXSERDES_SPEED_2_5_GBPS,
+ PEXSERDES_SPEED_5_GBPS,
+ USB3SERDES_SPEED_5_GBPS_HOST,
+ USB3SERDES_SPEED_5_GBPS_DEVICE,
+ LAST_PEX_USB_SPEED_SEQ_TYPE
+};
+
+/* The different sequence types for SATA and SGMII */
+enum {
+ SATA,
+ SGMII,
+ SGMII_3_125,
+ LAST_SATA_SGMII_SEQ_TYPE
+};
+
+enum {
+ QSGMII_SEQ_IDX,
+ LAST_QSGMII_SEQ_TYPE
+};
+
+enum {
+ XAUI_SEQ_IDX,
+ RXAUI_SEQ_IDX,
+ LAST_XAUI_RXAUI_SEQ_TYPE
+};
+
+enum {
+ SATASERDES_SPEED_1_5_GBPS,
+ SATASERDES_SPEED_3_GBPS,
+ SATASERDES_SPEED_6_GBPS,
+ SGMIISERDES_SPEED_1_25_GBPS,
+ SGMIISERDES_SPEED_3_125_GBPS,
+ LAST_SATA_SGMII_SPEED_SEQ_TYPE
+};
+
+extern u8 selectors_serdes_rev1_map[LAST_SERDES_TYPE][MAX_SERDES_LANES];
+extern u8 selectors_serdes_rev2_map[LAST_SERDES_TYPE][MAX_SERDES_LANES];
+
+u8 hws_ctrl_serdes_rev_get(void);
+int mv_update_serdes_select_phy_mode_seq(void);
+int hws_board_topology_load(struct serdes_map *serdes_map_array);
+enum serdes_seq serdes_type_and_speed_to_speed_seq(enum serdes_type serdes_type,
+ enum serdes_speed baud_rate);
+int hws_serdes_seq_init(void);
+int hws_serdes_seq_db_init(void);
+int hws_power_up_serdes_lanes(struct serdes_map *serdes_config_map);
+int hws_ctrl_high_speed_serdes_phy_config(void);
+int serdes_power_up_ctrl(u32 serdes_num, int serdes_power_up,
+ enum serdes_type serdes_type,
+ enum serdes_speed baud_rate,
+ enum serdes_mode serdes_mode,
+ enum ref_clock ref_clock);
+int serdes_power_up_ctrl_ext(u32 serdes_num, int serdes_power_up,
+ enum serdes_type serdes_type,
+ enum serdes_speed baud_rate,
+ enum serdes_mode serdes_mode,
+ enum ref_clock ref_clock);
+u32 hws_serdes_silicon_ref_clock_get(void);
+int hws_serdes_pex_ref_clock_get(enum serdes_type serdes_type,
+ enum ref_clock *ref_clock);
+int hws_ref_clock_set(u32 serdes_num, enum serdes_type serdes_type,
+ enum ref_clock ref_clock);
+int hws_update_serdes_phy_selectors(struct serdes_map *serdes_config_map);
+u32 hws_serdes_get_phy_selector_val(int serdes_num,
+ enum serdes_type serdes_type);
+u32 hws_serdes_get_ref_clock_val(enum serdes_type serdes_type);
+u32 hws_serdes_get_max_lane(void);
+int hws_get_ext_base_addr(u32 serdes_num, u32 base_addr, u32 unit_base_offset,
+ u32 *unit_base_reg, u32 *unit_offset);
+int hws_pex_tx_config_seq(struct serdes_map *serdes_map);
+u32 hws_get_physical_serdes_num(u32 serdes_num);
+int hws_is_serdes_active(u8 lane_num);
+
+#endif /* _HIGH_SPEED_ENV_SPEC_H */
diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec-38x.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec-38x.c
new file mode 100644
index 0000000..5f2c3eb
--- /dev/null
+++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec-38x.c
@@ -0,0 +1,1009 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+#include "high_speed_topology_spec.h"
+#include "sys_env_lib.h"
+
+#ifdef CONFIG_CUSTOMER_BOARD_SUPPORT
+/*
+ * This is an example implementation for this custom board
+ * specific function
+ */
+static struct serdes_map custom_board_topology_config[] = {
+ /* Customer Board Topology - reference from Marvell DB-GP board */
+ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {SATA1, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {SATA3, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {SATA2, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}
+};
+
+int hws_board_topology_load(struct serdes_map *serdes_map_array)
+{
+ serdes_map_array = custom_board_topology_config;
+}
+#endif
+
+load_topology_func_ptr load_topology_func_arr[] = {
+ load_topology_rd, /* RD NAS */
+ load_topology_db, /* 6820 DB-BP (A38x) */
+ load_topology_rd, /* RD AP */
+ load_topology_db_ap, /* DB AP */
+ load_topology_db_gp, /* DB GP */
+ load_topology_db_381, /* 6821 DB-BP (A381) */
+ load_topology_db_amc, /* DB-AMC */
+};
+
+/*****************************************/
+/** Load topology - Marvell 380 DB - BP **/
+/*****************************************/
+/* Configuration options */
+struct serdes_map db_config_default[MAX_SERDES_LANES] = {
+ {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ {SATA3, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}
+};
+
+struct serdes_map db_config_slm1363_c[MAX_SERDES_LANES] = {
+ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0},
+ {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ {PEX3, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ {SATA2, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0},
+};
+
+struct serdes_map db_config_slm1363_d[MAX_SERDES_LANES] = {
+ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0},
+ {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0},
+ {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0},
+ {PEX3, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0},
+ {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}
+};
+
+struct serdes_map db_config_slm1363_e[MAX_SERDES_LANES] = {
+ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {SATA1, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0},
+ {SATA2, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0}
+};
+
+struct serdes_map db_config_slm1363_f[MAX_SERDES_LANES] = {
+ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0},
+ {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ {PEX3, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ {SATA2, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}
+};
+
+struct serdes_map db_config_slm1364_d[MAX_SERDES_LANES] = {
+ {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0},
+ {SGMII0, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0},
+ {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0},
+ {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {SGMII2, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0}
+};
+
+struct serdes_map db_config_slm1364_e[MAX_SERDES_LANES] = {
+ {SGMII0, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0},
+ {SGMII2, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0},
+ {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}
+};
+
+struct serdes_map db_config_slm1364_f[MAX_SERDES_LANES] = {
+ {SGMII0, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0},
+ {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {SGMII2, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0, 0},
+ {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}
+};
+
+/*************************************************************************/
+/** The following structs are mapping for DB board 'SatR' configuration **/
+/*************************************************************************/
+struct serdes_map db_satr_config_lane1[SATR_DB_LANE1_MAX_OPTIONS] = {
+ /* 0 */ {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0,
+ 0},
+ /* 1 */ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ /* 2 */ {SATA0, SERDES_SPEED_3_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ /* 3 */ {SGMII0, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0,
+ 0},
+ /* 4 */ {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0,
+ 0},
+ /* 5 */ {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0,
+ 0},
+ /* 6 */ {QSGMII, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}
+};
+
+struct serdes_map db_satr_config_lane2[SATR_DB_LANE2_MAX_OPTIONS] = {
+ /* 0 */ {DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE, 0,
+ 0},
+ /* 1 */ {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ /* 2 */ {SATA1, SERDES_SPEED_3_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ /* 3 */ {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0,
+ 0}
+};
+
+/*******************************************************/
+/* Configuration options DB ****************************/
+/* mapping from TWSI address data to configuration map */
+/*******************************************************/
+struct serdes_map *topology_config_db[] = {
+ db_config_slm1363_c,
+ db_config_slm1363_d,
+ db_config_slm1363_e,
+ db_config_slm1363_f,
+ db_config_slm1364_d,
+ db_config_slm1364_e,
+ db_config_slm1364_f,
+ db_config_default
+};
+
+/*************************************/
+/** Load topology - Marvell DB - AP **/
+/*************************************/
+struct serdes_map db_ap_config_default[MAX_SERDES_LANES] = {
+ /* 0 */ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ /* 1 */ {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0,
+ 0},
+ /* 2 */ {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ /* 3 */ {SGMII2, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0,
+ 0},
+ /* 4 */ {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0,
+ 0},
+ /* 5 */ {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}
+};
+
+/*************************************/
+/** Load topology - Marvell DB - GP **/
+/*************************************/
+struct serdes_map db_gp_config_default[MAX_SERDES_LANES] = {
+ /* 0 */ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ /* 1 */ {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ /* 2 */ {SATA1, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ /* 3 */ {SATA3, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ /* 4 */ {SATA2, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+ /* 5 */ {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0,
+ 0}
+};
+
+struct serdes_map db_amc_config_default[MAX_SERDES_LANES] = {
+ /* 0 */ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0},
+ /* 1 */ {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0},
+ /* 2 */ {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0},
+ /* 3 */ {PEX3, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X4, 0, 0},
+ /* 4 */ {SGMII1, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0,
+ 0},
+ /* 5 */ {SGMII2, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 0,
+ 0},
+};
+
+/*****************************************/
+/** Load topology - Marvell 381 DB - BP **/
+/*****************************************/
+/* Configuration options */
+struct serdes_map db381_config_default[MAX_SERDES_LANES] = {
+ {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 1, 1},
+ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
+ {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}
+};
+
+struct serdes_map db_config_slm1427[MAX_SERDES_LANES] = {
+ {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 1, 1},
+ {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 1, 1},
+ {SATA1, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 1, 1},
+ {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 1, 1}
+};
+
+struct serdes_map db_config_slm1426[MAX_SERDES_LANES] = {
+ {SATA0, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 1, 1},
+ {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 1, 1},
+ {SATA1, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 1, 1},
+ {SGMII2, SERDES_SPEED_3_125_GBPS, SERDES_DEFAULT_MODE, 1, 1}
+};
+
+/*
+ * this array must be aligned with enum topology_config_db381 enum,
+ * every update to this array requires update to enum topology_config_db381
+ * enum
+ */
+struct serdes_map *topology_config_db_381[] = {
+ db_config_slm1427,
+ db_config_slm1426,
+ db381_config_default,
+};
+
+u8 topology_config_db_mode_get(void)
+{
+ u8 mode;
+
+ DEBUG_INIT_FULL_S("\n### topology_config_db_mode_get ###\n");
+
+ /* Default - return DB_CONFIG_DEFAULT */
+
+ if (!i2c_read(DB_GET_MODE_SLM1363_ADDR, 0, 1, &mode, 1)) {
+ switch (mode & 0xf) {
+ case 0xc:
+ DEBUG_INIT_S("\nInit DB board SLM 1363 C topology\n");
+ return DB_CONFIG_SLM1363_C;
+ case 0xd:
+ DEBUG_INIT_S("\nInit DB board SLM 1363 D topology\n");
+ return DB_CONFIG_SLM1363_D;
+ case 0xe:
+ DEBUG_INIT_S("\nInit DB board SLM 1363 E topology\n");
+ return DB_CONFIG_SLM1363_E;
+ case 0xf:
+ DEBUG_INIT_S("\nInit DB board SLM 1363 F topology\n");
+ return DB_CONFIG_SLM1363_F;
+ default: /* not the right module */
+ break;
+ }
+ }
+
+ /* SLM1364 Module */
+ if (i2c_read(DB_GET_MODE_SLM1364_ADDR, 0, 1, &mode, 1)) {
+ DEBUG_INIT_S("\nInit DB board default topology\n");
+ return DB_CONFIG_DEFAULT;
+ }
+
+ switch (mode & 0xf) {
+ case 0xd:
+ DEBUG_INIT_S("\nInit DB board SLM 1364 D topology\n");
+ return DB_CONFIG_SLM1364_D;
+ case 0xe:
+ DEBUG_INIT_S("\nInit DB board SLM 1364 E topology\n");
+ return DB_CONFIG_SLM1364_E;
+ case 0xf:
+ DEBUG_INIT_S("\nInit DB board SLM 1364 F topology\n");
+ return DB_CONFIG_SLM1364_F;
+ default: /* Default configuration */
+ DEBUG_INIT_S("\nInit DB board default topology\n");
+ return DB_CONFIG_DEFAULT;
+ }
+}
+
+u8 topology_config_db_381_mode_get(void)
+{
+ u8 mode;
+
+ DEBUG_INIT_FULL_S("\n### topology_config_db_381_mode_get ###\n");
+
+ if (!i2c_read(DB381_GET_MODE_SLM1426_1427_ADDR, 0, 2, &mode, 1)) {
+ switch (mode & 0xf) {
+ case 0x1:
+ DEBUG_INIT_S("\nInit DB-381 board SLM 1427 topology\n");
+ return DB_CONFIG_SLM1427;
+ case 0x2:
+ DEBUG_INIT_S("\nInit DB-381 board SLM 1426 topology\n");
+ return DB_CONFIG_SLM1426;
+ default: /* not the right module */
+ break;
+ }
+ }
+
+ /* in case not detected any supported module, use default topology */
+ DEBUG_INIT_S("\nInit DB-381 board default topology\n");
+ return DB_381_CONFIG_DEFAULT;
+}
+
+/*
+ * Read SatR field 'sgmiispeed' and update lane topology SGMII entries
+ * speed setup
+ */
+int update_topology_sgmii_speed(struct serdes_map *serdes_map_array)
+{
+ u32 serdes_type, lane_num;
+ u8 config_val;
+
+ /* Update SGMII speed settings by 'sgmiispeed' SatR value */
+ for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) {
+ serdes_type = serdes_map_array[lane_num].serdes_type;
+ /*Read SatR configuration for SGMII speed */
+ if ((serdes_type == SGMII0) || (serdes_type == SGMII1) ||
+ (serdes_type == SGMII2)) {
+ /* Read SatR 'sgmiispeed' value */
+ if (i2c_read(EEPROM_I2C_ADDR, 0, 2, &config_val, 1)) {
+ printf("%s: TWSI Read of 'sgmiispeed' failed\n",
+ __func__);
+ return MV_FAIL;
+ }
+
+ if (0 == (config_val & 0x40)) {
+ serdes_map_array[lane_num].serdes_speed =
+ SERDES_SPEED_1_25_GBPS;
+ } else {
+ serdes_map_array[lane_num].serdes_speed =
+ SERDES_SPEED_3_125_GBPS;
+ }
+ }
+ }
+ return MV_OK;
+}
+
+struct serdes_map default_lane = {
+ DEFAULT_SERDES, LAST_SERDES_SPEED, SERDES_DEFAULT_MODE
+};
+int is_custom_topology = 0; /* indicate user of non-default topology */
+
+/*
+ * Read SatR fields (dbserdes1/2 , gpserdes1/2/5) and update lane
+ * topology accordingly
+ */
+int update_topology_satr(struct serdes_map *serdes_map_array)
+{
+ u8 config_val, lane_select, i;
+ u32 board_id = mv_board_id_get();
+
+ switch (board_id) {
+ case DB_68XX_ID: /* read 'dbserdes1' & 'dbserdes2' */
+ case DB_BP_6821_ID:
+ if (i2c_read(EEPROM_I2C_ADDR, 1, 2, &config_val, 1)) {
+ printf("%s: TWSI Read of 'dbserdes1/2' failed\n",
+ __func__);
+ return MV_FAIL;
+ }
+
+ /* Lane #1 */
+ lane_select = (config_val & SATR_DB_LANE1_CFG_MASK) >>
+ SATR_DB_LANE1_CFG_OFFSET;
+ if (lane_select >= SATR_DB_LANE1_MAX_OPTIONS) {
+ printf("\n\%s: Error: invalid value for SatR field 'dbserdes1' (%x)\n",
+ __func__, lane_select);
+ printf("\t_skipping Topology update (run 'SatR write default')\n");
+ return MV_FAIL;
+ }
+
+ /*
+ * If modified default serdes_type for lane#1, update
+ * topology and mark it as custom
+ */
+ if (serdes_map_array[1].serdes_type !=
+ db_satr_config_lane1[lane_select].serdes_type) {
+ serdes_map_array[1] = db_satr_config_lane1[lane_select];
+ is_custom_topology = 1;
+ /* DB 381/2 board has inverted SerDes polarity */
+ if (board_id == DB_BP_6821_ID)
+ serdes_map_array[1].swap_rx =
+ serdes_map_array[1].swap_tx = 1;
+ }
+
+ /* Lane #2 */
+ lane_select = (config_val & SATR_DB_LANE2_CFG_MASK) >>
+ SATR_DB_LANE2_CFG_OFFSET;
+ if (lane_select >= SATR_DB_LANE2_MAX_OPTIONS) {
+ printf("\n\%s: Error: invalid value for SatR field 'dbserdes2' (%x)\n",
+ __func__, lane_select);
+ printf("\t_skipping Topology update (run 'SatR write default')\n");
+ return MV_FAIL;
+ }
+
+ /*
+ * If modified default serdes_type for lane@2, update
+ * topology and mark it as custom
+ */
+ if (serdes_map_array[2].serdes_type !=
+ db_satr_config_lane2[lane_select].serdes_type) {
+ serdes_map_array[2] = db_satr_config_lane2[lane_select];
+ is_custom_topology = 1;
+ /* DB 381/2 board has inverted SerDes polarity */
+ if (board_id == DB_BP_6821_ID)
+ serdes_map_array[2].swap_rx =
+ serdes_map_array[2].swap_tx = 1;
+ }
+
+ if (is_custom_topology == 1) {
+ /*
+ * Check for conflicts with detected lane #1 and
+ * lane #2 (Disable conflicted lanes)
+ */
+ for (i = 0; i < hws_serdes_get_max_lane(); i++) {
+ if (i != 1 && serdes_map_array[1].serdes_type ==
+ serdes_map_array[i].serdes_type) {
+ printf("\t_lane #%d Type conflicts with Lane #1 (Lane #%d disabled)\n",
+ i, i);
+ serdes_map_array[i] =
+ db_satr_config_lane1[0];
+ }
+
+ if (i != 2 &&
+ serdes_map_array[2].serdes_type ==
+ serdes_map_array[i].serdes_type) {
+ printf("\t_lane #%d Type conflicts with Lane #2 (Lane #%d disabled)\n",
+ i, i);
+ serdes_map_array[i] =
+ db_satr_config_lane1[0];
+ }
+ }
+ }
+
+ break; /* case DB_68XX_ID */
+ case DB_GP_68XX_ID: /* read 'gpserdes1' & 'gpserdes2' */
+ if (i2c_read(EEPROM_I2C_ADDR, 2, 2, &config_val, 1)) {
+ printf("%s: TWSI Read of 'gpserdes1/2' failed\n",
+ __func__);
+ return MV_FAIL;
+ }
+
+ /*
+ * Lane #1:
+ * lane_select = 0 --> SATA0,
+ * lane_select = 1 --> PCIe0 (mini PCIe)
+ */
+ lane_select = (config_val & SATR_GP_LANE1_CFG_MASK) >>
+ SATR_GP_LANE1_CFG_OFFSET;
+ if (lane_select == 1) {
+ serdes_map_array[1].serdes_mode = PEX0;
+ serdes_map_array[1].serdes_speed = SERDES_SPEED_5_GBPS;
+ serdes_map_array[1].serdes_type = PEX_ROOT_COMPLEX_X1;
+ /*
+ * If lane 1 is set to PCIe0 --> disable PCIe0
+ * on lane 0
+ */
+ serdes_map_array[0] = default_lane;
+ /* indicate user of non-default topology */
+ is_custom_topology = 1;
+ }
+ printf("Lane 1 detection: %s\n",
+ lane_select ? "PCIe0 (mini PCIe)" : "SATA0");
+
+ /*
+ * Lane #2:
+ * lane_select = 0 --> SATA1,
+ * lane_select = 1 --> PCIe1 (mini PCIe)
+ */
+ lane_select = (config_val & SATR_GP_LANE2_CFG_MASK) >>
+ SATR_GP_LANE2_CFG_OFFSET;
+ if (lane_select == 1) {
+ serdes_map_array[2].serdes_type = PEX1;
+ serdes_map_array[2].serdes_speed = SERDES_SPEED_5_GBPS;
+ serdes_map_array[2].serdes_mode = PEX_ROOT_COMPLEX_X1;
+ /* indicate user of non-default topology */
+ is_custom_topology = 1;
+ }
+ printf("Lane 2 detection: %s\n",
+ lane_select ? "PCIe1 (mini PCIe)" : "SATA1");
+ break; /* case DB_GP_68XX_ID */
+ }
+
+ if (is_custom_topology)
+ printf("\nDetected custom SerDes topology (to restore default run 'SatR write default')\n\n");
+
+ return MV_OK;
+}
+
+/*
+ * hws_update_device_toplogy
+ * DESCRIPTION: Update the default board topology for specific device Id
+ * INPUT:
+ * topology_config_ptr - pointer to the Serdes mapping
+ * topology_mode - topology mode (index)
+ * OUTPUT: None
+ * RRETURNS:
+ * MV_OK - if updating the board topology success
+ * MV_BAD_PARAM - if the input parameter is wrong
+ */
+int hws_update_device_toplogy(struct serdes_map *topology_config_ptr,
+ enum topology_config_db topology_mode)
+{
+ u32 dev_id = sys_env_device_id_get();
+ u32 board_id = mv_board_id_get();
+
+ switch (topology_mode) {
+ case DB_CONFIG_DEFAULT:
+ switch (dev_id) {
+ case MV_6810:
+ /*
+ * DB-AP : default for Lane3=SGMII2 -->
+ * 6810 supports only 2 SGMII interfaces:
+ * lane 3 disabled
+ */
+ if (board_id == DB_AP_68XX_ID) {
+ printf("Device 6810 supports only 2 SGMII interfaces: SGMII-2 @ lane3 disabled\n");
+ topology_config_ptr[3] = default_lane;
+ }
+
+ /*
+ * 6810 has only 4 SerDes and the forth one is
+ * Serdes number 5 (i.e. Serdes 4 is not connected),
+ * therefore we need to copy SerDes 5 configuration
+ * to SerDes 4
+ */
+ printf("Device 6810 does not supports SerDes Lane #4: replaced topology entry with lane #5\n");
+ topology_config_ptr[4] = topology_config_ptr[5];
+
+ /*
+ * No break between cases since the 1st
+ * 6820 limitation apply on 6810
+ */
+ case MV_6820:
+ /*
+ * DB-GP & DB-BP: default for Lane3=SATA3 -->
+ * 6810/20 supports only 2 SATA interfaces:
+ * lane 3 disabled
+ */
+ if ((board_id == DB_68XX_ID) ||
+ (board_id == DB_GP_68XX_ID)) {
+ printf("Device 6810/20 supports only 2 SATA interfaces: SATA Port 3 @ lane3 disabled\n");
+ topology_config_ptr[3] = default_lane;
+ }
+ /*
+ * DB-GP on 6820 only: default for Lane4=SATA2
+ * --> 6820 supports only 2 SATA interfaces:
+ * lane 3 disabled
+ */
+ if (board_id == DB_GP_68XX_ID && dev_id == MV_6820) {
+ printf("Device 6820 supports only 2 SATA interfaces: SATA Port 2 @ lane4 disabled\n");
+ topology_config_ptr[4] = default_lane;
+ }
+ break;
+ default:
+ break;
+ }
+ break;
+
+ default:
+ printf("sys_env_update_device_toplogy: selected topology is not supported by this routine\n");
+ break;
+ }
+
+ return MV_OK;
+}
+
+int load_topology_db_381(struct serdes_map *serdes_map_array)
+{
+ u32 lane_num;
+ u8 topology_mode;
+ struct serdes_map *topology_config_ptr;
+ u8 twsi_data;
+ u8 usb3_host0_or_device = 0, usb3_host1_or_device = 0;
+
+ printf("\nInitialize DB-88F6821-BP board topology\n");
+
+ /* Getting the relevant topology mode (index) */
+ topology_mode = topology_config_db_381_mode_get();
+ topology_config_ptr = topology_config_db_381[topology_mode];
+
+ /* Read USB3.0 mode: HOST/DEVICE */
+ if (load_topology_usb_mode_get(&twsi_data) == MV_OK) {
+ usb3_host0_or_device = (twsi_data & 0x1);
+ /* Only one USB3 device is enabled */
+ if (usb3_host0_or_device == 0)
+ usb3_host1_or_device = ((twsi_data >> 1) & 0x1);
+ }
+
+ /* Updating the topology map */
+ for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) {
+ serdes_map_array[lane_num].serdes_mode =
+ topology_config_ptr[lane_num].serdes_mode;
+ serdes_map_array[lane_num].serdes_speed =
+ topology_config_ptr[lane_num].serdes_speed;
+ serdes_map_array[lane_num].serdes_type =
+ topology_config_ptr[lane_num].serdes_type;
+ serdes_map_array[lane_num].swap_rx =
+ topology_config_ptr[lane_num].swap_rx;
+ serdes_map_array[lane_num].swap_tx =
+ topology_config_ptr[lane_num].swap_tx;
+
+ /* Update USB3 device if needed */
+ if (usb3_host0_or_device == 1 &&
+ serdes_map_array[lane_num].serdes_type == USB3_HOST0)
+ serdes_map_array[lane_num].serdes_type = USB3_DEVICE;
+
+ if (usb3_host1_or_device == 1 &&
+ serdes_map_array[lane_num].serdes_type == USB3_HOST1)
+ serdes_map_array[lane_num].serdes_type = USB3_DEVICE;
+ }
+
+ /* If not detected any SerDes Site module, read 'SatR' lane setup */
+ if (topology_mode == DB_381_CONFIG_DEFAULT)
+ update_topology_satr(serdes_map_array);
+
+ /* update 'sgmiispeed' settings */
+ update_topology_sgmii_speed(serdes_map_array);
+
+ return MV_OK;
+}
+
+int load_topology_db(struct serdes_map *serdes_map_array)
+{
+ u32 lane_num;
+ u8 topology_mode;
+ struct serdes_map *topology_config_ptr;
+ u8 twsi_data;
+ u8 usb3_host0_or_device = 0, usb3_host1_or_device = 0;
+
+ printf("\nInitialize DB-88F6820-BP board topology\n");
+
+ /* Getting the relevant topology mode (index) */
+ topology_mode = topology_config_db_mode_get();
+
+ if (topology_mode == DB_NO_TOPOLOGY)
+ topology_mode = DB_CONFIG_DEFAULT;
+
+ topology_config_ptr = topology_config_db[topology_mode];
+
+ /* Update the default board topology device flavours */
+ CHECK_STATUS(hws_update_device_toplogy
+ (topology_config_ptr, topology_mode));
+
+ /* Read USB3.0 mode: HOST/DEVICE */
+ if (load_topology_usb_mode_get(&twsi_data) == MV_OK) {
+ usb3_host0_or_device = (twsi_data & 0x1);
+ /* Only one USB3 device is enabled */
+ if (usb3_host0_or_device == 0)
+ usb3_host1_or_device = ((twsi_data >> 1) & 0x1);
+ }
+
+ /* Updating the topology map */
+ for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) {
+ serdes_map_array[lane_num].serdes_mode =
+ topology_config_ptr[lane_num].serdes_mode;
+ serdes_map_array[lane_num].serdes_speed =
+ topology_config_ptr[lane_num].serdes_speed;
+ serdes_map_array[lane_num].serdes_type =
+ topology_config_ptr[lane_num].serdes_type;
+ serdes_map_array[lane_num].swap_rx =
+ topology_config_ptr[lane_num].swap_rx;
+ serdes_map_array[lane_num].swap_tx =
+ topology_config_ptr[lane_num].swap_tx;
+
+ /*
+ * Update USB3 device if needed - relevant for
+ * lane 3,4,5 only
+ */
+ if (lane_num >= 3) {
+ if ((serdes_map_array[lane_num].serdes_type ==
+ USB3_HOST0) && (usb3_host0_or_device == 1))
+ serdes_map_array[lane_num].serdes_type =
+ USB3_DEVICE;
+
+ if ((serdes_map_array[lane_num].serdes_type ==
+ USB3_HOST1) && (usb3_host1_or_device == 1))
+ serdes_map_array[lane_num].serdes_type =
+ USB3_DEVICE;
+ }
+ }
+
+ /* If not detected any SerDes Site module, read 'SatR' lane setup */
+ if (topology_mode == DB_CONFIG_DEFAULT)
+ update_topology_satr(serdes_map_array);
+
+ /* update 'sgmiispeed' settings */
+ update_topology_sgmii_speed(serdes_map_array);
+
+ return MV_OK;
+}
+
+int load_topology_db_ap(struct serdes_map *serdes_map_array)
+{
+ u32 lane_num;
+ struct serdes_map *topology_config_ptr;
+
+ DEBUG_INIT_FULL_S("\n### load_topology_db_ap ###\n");
+
+ printf("\nInitialize DB-AP board topology\n");
+ topology_config_ptr = db_ap_config_default;
+
+ /* Update the default board topology device flavours */
+ CHECK_STATUS(hws_update_device_toplogy
+ (topology_config_ptr, DB_CONFIG_DEFAULT));
+
+ /* Updating the topology map */
+ for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) {
+ serdes_map_array[lane_num].serdes_mode =
+ topology_config_ptr[lane_num].serdes_mode;
+ serdes_map_array[lane_num].serdes_speed =
+ topology_config_ptr[lane_num].serdes_speed;
+ serdes_map_array[lane_num].serdes_type =
+ topology_config_ptr[lane_num].serdes_type;
+ serdes_map_array[lane_num].swap_rx =
+ topology_config_ptr[lane_num].swap_rx;
+ serdes_map_array[lane_num].swap_tx =
+ topology_config_ptr[lane_num].swap_tx;
+ }
+
+ update_topology_sgmii_speed(serdes_map_array);
+
+ return MV_OK;
+}
+
+int load_topology_db_gp(struct serdes_map *serdes_map_array)
+{
+ u32 lane_num;
+ struct serdes_map *topology_config_ptr;
+ int is_sgmii = 0;
+
+ DEBUG_INIT_FULL_S("\n### load_topology_db_gp ###\n");
+
+ topology_config_ptr = db_gp_config_default;
+
+ printf("\nInitialize DB-GP board topology\n");
+
+ /* check S@R: if lane 5 is USB3 or SGMII */
+ if (load_topology_rd_sgmii_usb(&is_sgmii) != MV_OK)
+ printf("%s: TWSI Read failed - Loading Default Topology\n",
+ __func__);
+ else {
+ topology_config_ptr[5].serdes_type =
+ is_sgmii ? SGMII2 : USB3_HOST1;
+ topology_config_ptr[5].serdes_speed = is_sgmii ?
+ SERDES_SPEED_3_125_GBPS : SERDES_SPEED_5_GBPS;
+ topology_config_ptr[5].serdes_mode = SERDES_DEFAULT_MODE;
+ }
+
+ /* Update the default board topology device flavours */
+ CHECK_STATUS(hws_update_device_toplogy
+ (topology_config_ptr, DB_CONFIG_DEFAULT));
+
+ /* Updating the topology map */
+ for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) {
+ serdes_map_array[lane_num].serdes_mode =
+ topology_config_ptr[lane_num].serdes_mode;
+ serdes_map_array[lane_num].serdes_speed =
+ topology_config_ptr[lane_num].serdes_speed;
+ serdes_map_array[lane_num].serdes_type =
+ topology_config_ptr[lane_num].serdes_type;
+ serdes_map_array[lane_num].swap_rx =
+ topology_config_ptr[lane_num].swap_rx;
+ serdes_map_array[lane_num].swap_tx =
+ topology_config_ptr[lane_num].swap_tx;
+ }
+
+ /*
+ * Update 'gpserdes1/2/3' lane configuration , and 'sgmiispeed'
+ * for SGMII lanes
+ */
+ update_topology_satr(serdes_map_array);
+ update_topology_sgmii_speed(serdes_map_array);
+
+ return MV_OK;
+}
+
+int load_topology_db_amc(struct serdes_map *serdes_map_array)
+{
+ u32 lane_num;
+ struct serdes_map *topology_config_ptr;
+
+ DEBUG_INIT_FULL_S("\n### load_topology_db_amc ###\n");
+
+ printf("\nInitialize DB-AMC board topology\n");
+ topology_config_ptr = db_amc_config_default;
+
+ /* Update the default board topology device flavours */
+ CHECK_STATUS(hws_update_device_toplogy
+ (topology_config_ptr, DB_CONFIG_DEFAULT));
+
+ /* Updating the topology map */
+ for (lane_num = 0; lane_num < hws_serdes_get_max_lane(); lane_num++) {
+ serdes_map_array[lane_num].serdes_mode =
+ topology_config_ptr[lane_num].serdes_mode;
+ serdes_map_array[lane_num].serdes_speed =
+ topology_config_ptr[lane_num].serdes_speed;
+ serdes_map_array[lane_num].serdes_type =
+ topology_config_ptr[lane_num].serdes_type;
+ serdes_map_array[lane_num].swap_rx =
+ topology_config_ptr[lane_num].swap_rx;
+ serdes_map_array[lane_num].swap_tx =
+ topology_config_ptr[lane_num].swap_tx;
+ }
+
+ update_topology_sgmii_speed(serdes_map_array);
+
+ return MV_OK;
+}
+
+int load_topology_rd(struct serdes_map *serdes_map_array)
+{
+ u8 mode;
+
+ DEBUG_INIT_FULL_S("\n### load_topology_rd ###\n");
+
+ DEBUG_INIT_S("\nInit RD board ");
+
+ /* Reading mode */
+ DEBUG_INIT_FULL_S("load_topology_rd: getting mode\n");
+ if (i2c_read(EEPROM_I2C_ADDR, 0, 2, &mode, 1)) {
+ DEBUG_INIT_S("load_topology_rd: TWSI Read failed\n");
+ return MV_FAIL;
+ }
+
+ /* Updating the topology map */
+ DEBUG_INIT_FULL_S("load_topology_rd: Loading board topology details\n");
+
+ /* RD mode: 0 = NAS, 1 = AP */
+ if (((mode >> 1) & 0x1) == 0) {
+ CHECK_STATUS(load_topology_rd_nas(serdes_map_array));
+ } else {
+ CHECK_STATUS(load_topology_rd_ap(serdes_map_array));
+ }
+
+ update_topology_sgmii_speed(serdes_map_array);
+
+ return MV_OK;
+}
+
+int load_topology_rd_nas(struct serdes_map *serdes_map_array)
+{
+ int is_sgmii = 0;
+ u32 i;
+
+ DEBUG_INIT_S("\nInit RD NAS topology ");
+
+ /* check if lane 4 is USB3 or SGMII */
+ if (load_topology_rd_sgmii_usb(&is_sgmii) != MV_OK) {
+ DEBUG_INIT_S("load_topology_rd NAS: TWSI Read failed\n");
+ return MV_FAIL;
+ }
+
+ /* Lane 0 */
+ serdes_map_array[0].serdes_type = PEX0;
+ serdes_map_array[0].serdes_speed = SERDES_SPEED_5_GBPS;
+ serdes_map_array[0].serdes_mode = PEX_ROOT_COMPLEX_X1;
+
+ /* Lane 1 */
+ serdes_map_array[1].serdes_type = SATA0;
+ serdes_map_array[1].serdes_speed = SERDES_SPEED_3_GBPS;
+ serdes_map_array[1].serdes_mode = SERDES_DEFAULT_MODE;
+
+ /* Lane 2 */
+ serdes_map_array[2].serdes_type = SATA1;
+ serdes_map_array[2].serdes_speed = SERDES_SPEED_3_GBPS;
+ serdes_map_array[2].serdes_mode = SERDES_DEFAULT_MODE;
+
+ /* Lane 3 */
+ serdes_map_array[3].serdes_type = SATA3;
+ serdes_map_array[3].serdes_speed = SERDES_SPEED_3_GBPS;
+ serdes_map_array[3].serdes_mode = SERDES_DEFAULT_MODE;
+
+ /* Lane 4 */
+ if (is_sgmii == 1) {
+ DEBUG_INIT_S("Serdes Lane 4 is SGMII\n");
+ serdes_map_array[4].serdes_type = SGMII1;
+ serdes_map_array[4].serdes_speed = SERDES_SPEED_3_125_GBPS;
+ serdes_map_array[4].serdes_mode = SERDES_DEFAULT_MODE;
+ } else {
+ DEBUG_INIT_S("Serdes Lane 4 is USB3\n");
+ serdes_map_array[4].serdes_type = USB3_HOST0;
+ serdes_map_array[4].serdes_speed = SERDES_SPEED_5_GBPS;
+ serdes_map_array[4].serdes_mode = SERDES_DEFAULT_MODE;
+ }
+
+ /* Lane 5 */
+ serdes_map_array[5].serdes_type = SATA2;
+ serdes_map_array[5].serdes_speed = SERDES_SPEED_3_GBPS;
+ serdes_map_array[5].serdes_mode = SERDES_DEFAULT_MODE;
+
+ /* init swap configuration */
+ for (i = 0; i <= 5; i++) {
+ serdes_map_array[i].swap_rx = 0;
+ serdes_map_array[i].swap_tx = 0;
+ }
+
+ return MV_OK;
+}
+
+int load_topology_rd_ap(struct serdes_map *serdes_map_array)
+{
+ int is_sgmii = 0;
+ u32 i;
+
+ DEBUG_INIT_S("\nInit RD AP topology ");
+
+ /* check if lane 4 is USB3 or SGMII */
+ if (load_topology_rd_sgmii_usb(&is_sgmii) != MV_OK) {
+ DEBUG_INIT_S("load_topology_rd AP: TWSI Read failed\n");
+ return MV_FAIL;
+ }
+
+ /* Lane 0 */
+ serdes_map_array[0].serdes_type = DEFAULT_SERDES;
+ serdes_map_array[0].serdes_speed = LAST_SERDES_SPEED;
+ serdes_map_array[0].serdes_mode = SERDES_DEFAULT_MODE;
+
+ /* Lane 1 */
+ serdes_map_array[1].serdes_type = PEX0;
+ serdes_map_array[1].serdes_speed = SERDES_SPEED_5_GBPS;
+ serdes_map_array[1].serdes_mode = PEX_ROOT_COMPLEX_X1;
+
+ /* Lane 2 */
+ serdes_map_array[2].serdes_type = PEX1;
+ serdes_map_array[2].serdes_speed = SERDES_SPEED_5_GBPS;
+ serdes_map_array[2].serdes_mode = PEX_ROOT_COMPLEX_X1;
+
+ /* Lane 3 */
+ serdes_map_array[3].serdes_type = SATA3;
+ serdes_map_array[3].serdes_speed = SERDES_SPEED_3_GBPS;
+ serdes_map_array[3].serdes_mode = SERDES_DEFAULT_MODE;
+
+ /* Lane 4 */
+ if (is_sgmii == 1) {
+ DEBUG_INIT_S("Serdes Lane 4 is SGMII\n");
+ serdes_map_array[4].serdes_type = SGMII1;
+ serdes_map_array[4].serdes_speed = SERDES_SPEED_3_125_GBPS;
+ serdes_map_array[4].serdes_mode = SERDES_DEFAULT_MODE;
+ } else {
+ DEBUG_INIT_S("Serdes Lane 4 is USB3\n");
+ serdes_map_array[4].serdes_type = USB3_HOST0;
+ serdes_map_array[4].serdes_speed = SERDES_SPEED_5_GBPS;
+ serdes_map_array[4].serdes_mode = SERDES_DEFAULT_MODE;
+ }
+
+ /* Lane 5 */
+ serdes_map_array[5].serdes_type = SATA2;
+ serdes_map_array[5].serdes_speed = SERDES_SPEED_3_GBPS;
+ serdes_map_array[5].serdes_mode = SERDES_DEFAULT_MODE;
+
+ /* init swap configuration */
+ for (i = 0; i <= 5; i++) {
+ serdes_map_array[i].swap_rx = 0;
+ serdes_map_array[i].swap_tx = 0;
+ }
+
+ return MV_OK;
+}
+
+int load_topology_rd_sgmii_usb(int *is_sgmii)
+{
+ u8 mode;
+
+ /*
+ * DB-GP board: Device 6810 supports only 2 GbE ports:
+ * SGMII2 not supported (USE USB3 Host instead)
+ */
+ if (sys_env_device_id_get() == MV_6810) {
+ printf("Device 6810 supports only 2 GbE ports: SGMII-2 @ lane5 disabled (setting USB3.0 H1 instead)\n");
+ *is_sgmii = 0;
+ return MV_OK;
+ }
+
+ if (!i2c_read(RD_GET_MODE_ADDR, 1, 2, &mode, 1)) {
+ *is_sgmii = ((mode >> 2) & 0x1);
+ } else {
+ /* else use the default - USB3 */
+ *is_sgmii = 0;
+ }
+
+ if (*is_sgmii)
+ is_custom_topology = 1;
+
+ printf("Lane 5 detection: %s\n",
+ *is_sgmii ? "SGMII2" : "USB3.0 Host Port 1");
+
+ return MV_OK;
+}
+
+/*
+ * 'usb3port0'/'usb3port1' fields are located in EEPROM,
+ * at 3rd byte(offset=2), bit 0:1 (respectively)
+ */
+int load_topology_usb_mode_get(u8 *twsi_data)
+{
+ if (!i2c_read(EEPROM_I2C_ADDR, 2, 2, twsi_data, 1))
+ return MV_OK;
+
+ return MV_ERROR;
+}
diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec.h b/arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec.h
new file mode 100644
index 0000000..3cfb1c7
--- /dev/null
+++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_topology_spec.h
@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _HIGHSPEED_TOPOLOGY_SPEC_H
+#define _HIGHSPEED_TOPOLOGY_SPEC_H
+
+#include "high_speed_env_spec.h"
+
+/* Topology map options for the DB_A38X_BP board */
+enum topology_config_db {
+ DB_CONFIG_SLM1363_C,
+ DB_CONFIG_SLM1363_D,
+ DB_CONFIG_SLM1363_E,
+ DB_CONFIG_SLM1363_F,
+ DB_CONFIG_SLM1364_D,
+ DB_CONFIG_SLM1364_E,
+ DB_CONFIG_SLM1364_F,
+ DB_CONFIG_DEFAULT,
+ DB_NO_TOPOLOGY
+};
+
+/*
+ * this enum must be aligned with topology_config_db_381 array,
+ * every update to this enum requires update to topology_config_db_381
+ * array
+ */
+enum topology_config_db381 {
+ DB_CONFIG_SLM1427, /* enum for db_config_slm1427 */
+ DB_CONFIG_SLM1426, /* enum for db_config_slm1426 */
+ DB_381_CONFIG_DEFAULT,
+ DB_381_NO_TOPOLOGY
+};
+
+/* A generic function pointer for loading the board topology map */
+typedef int (*load_topology_func_ptr)(struct serdes_map *serdes_map_array);
+
+extern load_topology_func_ptr load_topology_func_arr[];
+
+/*
+ * topology_config_db_mode_get -
+ *
+ * DESCRIPTION: Gets the relevant topology mode (index).
+ * for load_topology_db use only.
+ * INPUT: None.
+ * OUTPUT: None.
+ * RETURNS: the topology mode
+ */
+u8 topology_config_db_mode_get(void);
+
+/*
+ * load_topology_xxx -
+ *
+ * DESCRIPTION: Loads the board topology for the XXX board
+ * INPUT: serdes_map_array - The struct that will contain
+ * the board topology map
+ * OUTPUT: The board topology map.
+ * RETURNS: MV_OK for success
+ * MV_FAIL for failure (a wrong topology mode was read
+ * from the board)
+ */
+
+/* load_topology_db - Loads the board topology for DB Board */
+int load_topology_db(struct serdes_map *serdes_map_array);
+
+/* load_topology_rd - Loads the board topology for RD Board */
+int load_topology_rd(struct serdes_map *serdes_map_array);
+
+/* load_topology_rd_nas - Loads the board topology for RD NAS Board */
+int load_topology_rd_nas(struct serdes_map *serdes_map_array);
+
+/* load_topology_rd_ap - Loads the board topology for RD Ap Board */
+int load_topology_rd_ap(struct serdes_map *serdes_map_array);
+
+/* load_topology_db_ap - Loads the board topology for DB-AP Board */
+int load_topology_db_ap(struct serdes_map *serdes_map_array);
+
+/* load_topology_db_gp - Loads the board topology for DB GP Board */
+int load_topology_db_gp(struct serdes_map *serdes_map_array);
+
+/* load_topology_db_381 - Loads the board topology for 381 DB-BP Board */
+int load_topology_db_381(struct serdes_map *serdes_map_array);
+
+/* load_topology_db_amc - Loads the board topology for DB-AMC Board */
+int load_topology_db_amc(struct serdes_map *serdes_map_array);
+
+/*
+ * hws_update_device_toplogy
+ * DESCRIPTION: Update the default board topology for specific device Id
+ * INPUT:
+ * topology_config_ptr - pointer to the Serdes mapping
+ * topology_mode - topology mode (index)
+ * OUTPUT: None
+ * RRETURNS:
+ * MV_OK - if updating the board topology success
+ * MV_BAD_PARAM - if the input parameter is wrong
+ */
+int hws_update_device_toplogy(struct serdes_map *topology_config_ptr,
+ enum topology_config_db topology_mode);
+
+/*
+ * load_topology_rd_sgmii_usb -
+ *
+ * DESCRIPTION: For RD board check if lane 4 is USB3 or SGMII
+ * INPUT: None
+ * OUTPUT: is_sgmii - return 1 if lane 4 is SGMII
+ * return 0 if lane 4 is USB.
+ * RETURNS: MV_OK for success
+ */
+int load_topology_rd_sgmii_usb(int *is_sgmii);
+
+/*
+ * load_topology_usb_mode_get -
+ *
+ * DESCRIPTION: For DB board check if USB3.0 mode
+ * INPUT: None
+ * OUTPUT: twsi_data - return data read from S@R via I2C
+ * RETURNS: MV_OK for success
+ */
+int load_topology_usb_mode_get(u8 *twsi_data);
+
+#endif /* _HIGHSPEED_TOPOLOGY_SPEC_H */
diff --git a/arch/arm/mach-mvebu/serdes/a38x/seq_exec.c b/arch/arm/mach-mvebu/serdes/a38x/seq_exec.c
new file mode 100644
index 0000000..ee2305b
--- /dev/null
+++ b/arch/arm/mach-mvebu/serdes/a38x/seq_exec.c
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+#include "seq_exec.h"
+#include "high_speed_env_spec.h"
+
+#include "../../../drivers/ddr/marvell/a38x/ddr3_init.h"
+
+#if defined(MV_DEBUG_INIT_FULL) || defined(MV_DEBUG)
+#define DB(x) x
+#else
+#define DB(x)
+#endif
+
+/* Array for mapping the operation (write, poll or delay) functions */
+op_execute_func_ptr op_execute_func_arr[] = {
+ write_op_execute,
+ delay_op_execute,
+ poll_op_execute
+};
+
+int write_op_execute(u32 serdes_num, struct op_params *params, u32 data_arr_idx)
+{
+ u32 unit_base_reg, unit_offset, data, mask, reg_data, reg_addr;
+
+ /* Getting write op params from the input parameter */
+ data = params->data[data_arr_idx];
+ mask = params->mask;
+
+ /* an empty operation */
+ if (data == NO_DATA)
+ return MV_OK;
+
+ /* get updated base address since it can be different between Serdes */
+ CHECK_STATUS(hws_get_ext_base_addr(serdes_num, params->unit_base_reg,
+ params->unit_offset,
+ &unit_base_reg, &unit_offset));
+
+ /* Address calculation */
+ reg_addr = unit_base_reg + unit_offset * serdes_num;
+
+#ifdef SEQ_DEBUG
+ printf("Write: 0x%x: 0x%x (mask 0x%x) - ", reg_addr, data, mask);
+#endif
+ /* Reading old value */
+ reg_data = reg_read(reg_addr);
+ reg_data &= (~mask);
+
+ /* Writing new data */
+ data &= mask;
+ reg_data |= data;
+ reg_write(reg_addr, reg_data);
+
+#ifdef SEQ_DEBUG
+ printf(" - 0x%x\n", reg_data);
+#endif
+
+ return MV_OK;
+}
+
+int delay_op_execute(u32 serdes_num, struct op_params *params, u32 data_arr_idx)
+{
+ u32 delay;
+
+ /* Getting delay op params from the input parameter */
+ delay = params->wait_time;
+#ifdef SEQ_DEBUG
+ printf("Delay: %d\n", delay);
+#endif
+ mdelay(delay);
+
+ return MV_OK;
+}
+
+int poll_op_execute(u32 serdes_num, struct op_params *params, u32 data_arr_idx)
+{
+ u32 unit_base_reg, unit_offset, data, mask, num_of_loops, wait_time;
+ u32 poll_counter = 0;
+ u32 reg_addr, reg_data;
+
+ /* Getting poll op params from the input parameter */
+ data = params->data[data_arr_idx];
+ mask = params->mask;
+ num_of_loops = params->num_of_loops;
+ wait_time = params->wait_time;
+
+ /* an empty operation */
+ if (data == NO_DATA)
+ return MV_OK;
+
+ /* get updated base address since it can be different between Serdes */
+ CHECK_STATUS(hws_get_ext_base_addr(serdes_num, params->unit_base_reg,
+ params->unit_offset,
+ &unit_base_reg, &unit_offset));
+
+ /* Address calculation */
+ reg_addr = unit_base_reg + unit_offset * serdes_num;
+
+ /* Polling */
+#ifdef SEQ_DEBUG
+ printf("Poll: 0x%x: 0x%x (mask 0x%x)\n", reg_addr, data, mask);
+#endif
+
+ do {
+ reg_data = reg_read(reg_addr) & mask;
+ poll_counter++;
+ udelay(wait_time);
+ } while ((reg_data != data) && (poll_counter < num_of_loops));
+
+ if ((poll_counter >= num_of_loops) && (reg_data != data)) {
+ DEBUG_INIT_S("poll_op_execute: TIMEOUT\n");
+ return MV_TIMEOUT;
+ }
+
+ return MV_OK;
+}
+
+enum mv_op get_cfg_seq_op(struct op_params *params)
+{
+ if (params->wait_time == 0)
+ return WRITE_OP;
+ else if (params->num_of_loops == 0)
+ return DELAY_OP;
+
+ return POLL_OP;
+}
+
+int mv_seq_exec(u32 serdes_num, u32 seq_id)
+{
+ u32 seq_idx;
+ struct op_params *seq_arr;
+ u32 seq_size;
+ u32 data_arr_idx;
+ enum mv_op curr_op;
+
+ DB(printf("\n### mv_seq_exec ###\n"));
+ DB(printf("seq id: %d\n", seq_id));
+
+ if (hws_is_serdes_active(serdes_num) != 1) {
+ printf("mv_seq_exec_ext:Error: SerDes lane %d is not valid\n",
+ serdes_num);
+ return MV_BAD_PARAM;
+ }
+
+ seq_arr = serdes_seq_db[seq_id].op_params_ptr;
+ seq_size = serdes_seq_db[seq_id].cfg_seq_size;
+ data_arr_idx = serdes_seq_db[seq_id].data_arr_idx;
+
+ DB(printf("seq_size: %d\n", seq_size));
+ DB(printf("data_arr_idx: %d\n", data_arr_idx));
+
+ /* Executing the sequence operations */
+ for (seq_idx = 0; seq_idx < seq_size; seq_idx++) {
+ curr_op = get_cfg_seq_op(&seq_arr[seq_idx]);
+ op_execute_func_arr[curr_op](serdes_num, &seq_arr[seq_idx],
+ data_arr_idx);
+ }
+
+ return MV_OK;
+}
diff --git a/arch/arm/mach-mvebu/serdes/a38x/seq_exec.h b/arch/arm/mach-mvebu/serdes/a38x/seq_exec.h
new file mode 100644
index 0000000..14f406a
--- /dev/null
+++ b/arch/arm/mach-mvebu/serdes/a38x/seq_exec.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _SEQ_EXEC_H
+#define _SEQ_EXEC_H
+
+#define NA 0xff
+#define DEFAULT_PARAM 0
+#define MV_BOARD_TCLK_ERROR 0xffffffff
+
+#define NO_DATA 0xffffffff
+#define MAX_DATA_ARRAY 5
+#define FIRST_CELL 0
+
+/* Operation types */
+enum mv_op {
+ WRITE_OP,
+ DELAY_OP,
+ POLL_OP,
+};
+
+/* Operation parameters */
+struct op_params {
+ u32 unit_base_reg;
+ u32 unit_offset;
+ u32 mask;
+ u32 data[MAX_DATA_ARRAY]; /* data array */
+ u8 wait_time; /* msec */
+ u16 num_of_loops; /* for polling only */
+};
+
+/*
+ * Sequence parameters. Each sequence contains:
+ * 1. Sequence id.
+ * 2. Sequence size (total amount of operations during the sequence)
+ * 3. a series of operations. operations can be write, poll or delay
+ * 4. index in the data array (the entry where the relevant data sits)
+ */
+struct cfg_seq {
+ struct op_params *op_params_ptr;
+ u8 cfg_seq_size;
+ u8 data_arr_idx;
+};
+
+extern struct cfg_seq serdes_seq_db[];
+
+/*
+ * A generic function type for executing an operation (write, poll or delay)
+ */
+typedef int (*op_execute_func_ptr)(u32 serdes_num, struct op_params *params,
+ u32 data_arr_idx);
+
+/* Specific functions for executing each operation */
+int write_op_execute(u32 serdes_num, struct op_params *params,
+ u32 data_arr_idx);
+int delay_op_execute(u32 serdes_num, struct op_params *params,
+ u32 data_arr_idx);
+int poll_op_execute(u32 serdes_num, struct op_params *params, u32 data_arr_idx);
+enum mv_op get_cfg_seq_op(struct op_params *params);
+int mv_seq_exec(u32 serdes_num, u32 seq_id);
+
+#endif /*_SEQ_EXEC_H*/
diff --git a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c
new file mode 100644
index 0000000..efd3873
--- /dev/null
+++ b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c
@@ -0,0 +1,388 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+#include "seq_exec.h"
+#include "sys_env_lib.h"
+
+#include "../../../drivers/ddr/marvell/a38x/ddr3_a38x.h"
+
+#ifdef CONFIG_ARMADA_38X
+enum unit_id sys_env_soc_unit_nums[MAX_UNITS_ID][MAX_DEV_ID_NUM] = {
+/* 6820 6810 6811 6828 */
+/* PEX_UNIT_ID */ { 4, 3, 3, 4},
+/* ETH_GIG_UNIT_ID */ { 3, 2, 3, 3},
+/* USB3H_UNIT_ID */ { 2, 2, 2, 2},
+/* USB3D_UNIT_ID */ { 1, 1, 1, 1},
+/* SATA_UNIT_ID */ { 2, 2, 2, 4},
+/* QSGMII_UNIT_ID */ { 1, 0, 0, 1},
+/* XAUI_UNIT_ID */ { 0, 0, 0, 0},
+/* RXAUI_UNIT_ID */ { 0, 0, 0, 0}
+};
+#else /* if (CONFIG_ARMADA_39X) */
+enum unit_id sys_env_soc_unit_nums[MAX_UNITS_ID][MAX_DEV_ID_NUM] = {
+/* 6920 6928 */
+/* PEX_UNIT_ID */ { 4, 4},
+/* ETH_GIG_UNIT_ID */ { 3, 4},
+/* USB3H_UNIT_ID */ { 1, 2},
+/* USB3D_UNIT_ID */ { 0, 1},
+/* SATA_UNIT_ID */ { 0, 4},
+/* QSGMII_UNIT_ID */ { 0, 1},
+/* XAUI_UNIT_ID */ { 1, 1},
+/* RXAUI_UNIT_ID */ { 1, 1}
+};
+#endif
+
+u32 g_dev_id = -1;
+
+u32 mv_board_id_get(void)
+{
+#if defined(CONFIG_DB_88F6820_GP)
+ return DB_GP_68XX_ID;
+#else
+ /*
+ * Return 0 here for custom board as this should not be used
+ * for custom boards.
+ */
+ return 0;
+#endif
+}
+
+u32 mv_board_tclk_get(void)
+{
+ u32 value;
+
+ value = (reg_read(DEVICE_SAMPLE_AT_RESET1_REG) >> 15) & 0x1;
+
+ switch (value) {
+ case (0x0):
+ return 250000000;
+ case (0x1):
+ return 200000000;
+ default:
+ return 0xffffffff;
+ }
+}
+
+u32 mv_board_id_index_get(u32 board_id)
+{
+ /*
+ * Marvell Boards use 0x10 as base for Board ID:
+ * mask MSB to receive index for board ID
+ */
+ return board_id & (MARVELL_BOARD_ID_MASK - 1);
+}
+
+/*
+ * sys_env_suspend_wakeup_check
+ * DESCRIPTION: Reads GPIO input for suspend-wakeup indication.
+ * INPUT: None.
+ * OUTPUT:
+ * RETURNS: u32 indicating suspend wakeup status:
+ * 0 - Not supported,
+ * 1 - supported: read magic word detect wakeup,
+ * 2 - detected wakeup from GPIO.
+ */
+enum suspend_wakeup_status sys_env_suspend_wakeup_check(void)
+{
+ u32 reg, board_id_index, gpio;
+ struct board_wakeup_gpio board_gpio[] = MV_BOARD_WAKEUP_GPIO_INFO;
+
+ board_id_index = mv_board_id_index_get(mv_board_id_get());
+ if (!(sizeof(board_gpio) / sizeof(struct board_wakeup_gpio) >
+ board_id_index)) {
+ printf("\n_failed loading Suspend-Wakeup information (invalid board ID)\n");
+ return SUSPEND_WAKEUP_DISABLED;
+ }
+
+ /*
+ * - Detect if Suspend-Wakeup is supported on current board
+ * - Fetch the GPIO number for wakeup status input indication
+ */
+ if (board_gpio[board_id_index].gpio_num == -1) {
+ /* Suspend to RAM is not supported */
+ return SUSPEND_WAKEUP_DISABLED;
+ } else if (board_gpio[board_id_index].gpio_num == -2) {
+ /*
+ * Suspend to RAM is supported but GPIO indication is
+ * not implemented - Skip
+ */
+ return SUSPEND_WAKEUP_ENABLED;
+ } else {
+ gpio = board_gpio[board_id_index].gpio_num;
+ }
+
+ /* Initialize MPP for GPIO (set MPP = 0x0) */
+ reg = reg_read(MPP_CONTROL_REG(MPP_REG_NUM(gpio)));
+ /* reset MPP21 to 0x0, keep rest of MPP settings*/
+ reg &= ~MPP_MASK(gpio);
+ reg_write(MPP_CONTROL_REG(MPP_REG_NUM(gpio)), reg);
+
+ /* Initialize GPIO as input */
+ reg = reg_read(GPP_DATA_OUT_EN_REG(GPP_REG_NUM(gpio)));
+ reg |= GPP_MASK(gpio);
+ reg_write(GPP_DATA_OUT_EN_REG(GPP_REG_NUM(gpio)), reg);
+
+ /*
+ * Check GPP for input status from PIC: 0 - regular init,
+ * 1 - suspend wakeup
+ */
+ reg = reg_read(GPP_DATA_IN_REG(GPP_REG_NUM(gpio)));
+
+ /* if GPIO is ON: wakeup from S2RAM indication detected */
+ return (reg & GPP_MASK(gpio)) ? SUSPEND_WAKEUP_ENABLED_GPIO_DETECTED :
+ SUSPEND_WAKEUP_DISABLED;
+}
+
+/*
+ * mv_ctrl_dev_id_index_get
+ *
+ * DESCRIPTION: return SOC device index
+ * INPUT: None
+ * OUTPUT: None
+ * RETURN:
+ * return SOC device index
+ */
+u32 sys_env_id_index_get(u32 ctrl_model)
+{
+ switch (ctrl_model) {
+ case MV_6820_DEV_ID:
+ return MV_6820_INDEX;
+ case MV_6810_DEV_ID:
+ return MV_6810_INDEX;
+ case MV_6811_DEV_ID:
+ return MV_6811_INDEX;
+ case MV_6828_DEV_ID:
+ return MV_6828_INDEX;
+ case MV_6920_DEV_ID:
+ return MV_6920_INDEX;
+ case MV_6928_DEV_ID:
+ return MV_6928_INDEX;
+ default:
+ return MV_6820_INDEX;
+ }
+}
+
+u32 sys_env_unit_max_num_get(enum unit_id unit)
+{
+ u32 dev_id_index;
+
+ if (unit >= MAX_UNITS_ID) {
+ printf("%s: Error: Wrong unit type (%u)\n", __func__, unit);
+ return 0;
+ }
+
+ dev_id_index = sys_env_id_index_get(sys_env_model_get());
+ return sys_env_soc_unit_nums[unit][dev_id_index];
+}
+
+/*
+ * sys_env_model_get
+ * DESCRIPTION: Returns 16bit describing the device model (ID) as defined
+ * in Vendor ID configuration register
+ */
+u16 sys_env_model_get(void)
+{
+ u32 default_ctrl_id, ctrl_id = reg_read(DEV_ID_REG);
+ ctrl_id = (ctrl_id & (DEV_ID_REG_DEVICE_ID_MASK)) >>
+ DEV_ID_REG_DEVICE_ID_OFFS;
+
+ switch (ctrl_id) {
+ case MV_6820_DEV_ID:
+ case MV_6810_DEV_ID:
+ case MV_6811_DEV_ID:
+ case MV_6828_DEV_ID:
+ case MV_6920_DEV_ID:
+ case MV_6928_DEV_ID:
+ return ctrl_id;
+ default:
+ /* Device ID Default for A38x: 6820 , for A39x: 6920 */
+ #ifdef CONFIG_ARMADA_38X
+ default_ctrl_id = MV_6820_DEV_ID;
+ #else
+ default_ctrl_id = MV_6920_DEV_ID;
+ #endif
+ printf("%s: Error retrieving device ID (%x), using default ID = %x\n",
+ __func__, ctrl_id, default_ctrl_id);
+ return default_ctrl_id;
+ }
+}
+
+/*
+ * sys_env_device_id_get
+ * DESCRIPTION: Returns enum (0..7) index of the device model (ID)
+ */
+u32 sys_env_device_id_get(void)
+{
+ char *device_id_str[7] = {
+ "6810", "6820", "6811", "6828", "NONE", "6920", "6928"
+ };
+
+ if (g_dev_id != -1)
+ return g_dev_id;
+
+ g_dev_id = reg_read(DEVICE_SAMPLE_AT_RESET1_REG);
+ g_dev_id = g_dev_id >> SAR_DEV_ID_OFFS & SAR_DEV_ID_MASK;
+ printf("Detected Device ID %s\n", device_id_str[g_dev_id]);
+
+ return g_dev_id;
+}
+
+#ifdef MV_DDR_TOPOLOGY_UPDATE_FROM_TWSI
+/*
+* sys_env_get_topology_update_info
+* DESCRIPTION: Read TWSI fields to update DDR topology structure
+* INPUT: None
+* OUTPUT: None, 0 means no topology update
+* RETURN:
+* Bit mask of changes topology features
+*/
+#ifdef CONFIG_ARMADA_39X
+u32 sys_env_get_topology_update_info(
+ struct topology_update_info *tui)
+{
+ /* Set 16/32 bit configuration*/
+ tui->update_width = 1;
+ tui->width = TOPOLOGY_UPDATE_WIDTH_32BIT;
+
+#ifdef CONFIG_DDR3
+ if (1 == sys_env_config_get(MV_CONFIG_DDR_BUSWIDTH)) {
+ /* 16bit */
+ tui->width = TOPOLOGY_UPDATE_WIDTH_16BIT;
+ } else {
+ /* 32bit */
+ tui->width = TOPOLOGY_UPDATE_WIDTH_32BIT;
+ }
+#endif
+
+ /* Set ECC/no ECC bit configuration */
+ tui->update_ecc = 1;
+ if (0 == sys_env_config_get(MV_CONFIG_DDR_ECC_EN)) {
+ /* NO ECC */
+ tui->ecc = TOPOLOGY_UPDATE_ECC_OFF;
+ } else {
+ /* ECC */
+ tui->ecc = TOPOLOGY_UPDATE_ECC_ON;
+ }
+
+ tui->update_ecc_pup3_mode = 1;
+ tui->ecc_pup_mode_offset = TOPOLOGY_UPDATE_ECC_OFFSET_PUP4;
+
+ return MV_OK;
+}
+#else /*CONFIG_ARMADA_38X*/
+u32 sys_env_get_topology_update_info(
+ struct topology_update_info *tui)
+{
+ u8 config_val;
+ u8 ecc_mode[A38X_MV_MAX_MARVELL_BOARD_ID -
+ A38X_MARVELL_BOARD_ID_BASE][5] = TOPOLOGY_UPDATE;
+ u8 board_id = mv_board_id_get();
+ int ret;
+
+ board_id = mv_board_id_index_get(board_id);
+ ret = i2c_read(EEPROM_I2C_ADDR, 0, 2, &config_val, 1);
+ if (ret) {
+ DEBUG_INIT_S("sys_env_get_topology_update_info: TWSI Read failed\n");
+ return 0;
+ }
+
+ /* Set 16/32 bit configuration */
+ if ((0 == (config_val & DDR_SATR_CONFIG_MASK_WIDTH)) ||
+ (ecc_mode[board_id][TOPOLOGY_UPDATE_32BIT] == 0)) {
+ /* 16bit by SatR of 32bit mode not supported for the board */
+ if ((ecc_mode[board_id][TOPOLOGY_UPDATE_16BIT] != 0)) {
+ tui->update_width = 1;
+ tui->width = TOPOLOGY_UPDATE_WIDTH_16BIT;
+ }
+ } else {
+ /* 32bit */
+ if ((ecc_mode[board_id][TOPOLOGY_UPDATE_32BIT] != 0)) {
+ tui->update_width = 1;
+ tui->width = TOPOLOGY_UPDATE_WIDTH_32BIT;
+ }
+ }
+
+ /* Set ECC/no ECC bit configuration */
+ if (0 == (config_val & DDR_SATR_CONFIG_MASK_ECC)) {
+ /* NO ECC */
+ tui->update_ecc = 1;
+ tui->ecc = TOPOLOGY_UPDATE_ECC_OFF;
+ } else {
+ /* ECC */
+ if ((ecc_mode[board_id][TOPOLOGY_UPDATE_32BIT_ECC] != 0) ||
+ (ecc_mode[board_id][TOPOLOGY_UPDATE_16BIT_ECC] != 0) ||
+ (ecc_mode[board_id][TOPOLOGY_UPDATE_16BIT_ECC_PUP3] != 0)) {
+ tui->update_ecc = 1;
+ tui->ecc = TOPOLOGY_UPDATE_ECC_ON;
+ }
+ }
+
+ /* Set ECC pup bit configuration */
+ if (0 == (config_val & DDR_SATR_CONFIG_MASK_ECC_PUP)) {
+ /* PUP3 */
+ /*
+ * Check if PUP3 configuration allowed, if not -
+ * force Pup4 with warning message
+ */
+ if ((ecc_mode[board_id][TOPOLOGY_UPDATE_16BIT_ECC_PUP3] != 0)) {
+ if (tui->width == TOPOLOGY_UPDATE_WIDTH_16BIT) {
+ tui->update_ecc_pup3_mode = 1;
+ tui->ecc_pup_mode_offset =
+ TOPOLOGY_UPDATE_ECC_OFFSET_PUP3;
+ } else {
+ if ((ecc_mode[board_id][TOPOLOGY_UPDATE_32BIT_ECC] != 0)) {
+ printf("DDR Topology Update: ECC PUP3 not valid for 32bit mode, force ECC in PUP4\n");
+ tui->update_ecc_pup3_mode = 1;
+ tui->ecc_pup_mode_offset =
+ TOPOLOGY_UPDATE_ECC_OFFSET_PUP4;
+ }
+ }
+ } else {
+ if (ecc_mode[board_id][TOPOLOGY_UPDATE_16BIT_ECC] !=
+ 0) {
+ printf("DDR Topology Update: ECC on PUP3 not supported, force ECC on PUP4\n");
+ tui->update_ecc_pup3_mode = 1;
+ tui->ecc_pup_mode_offset =
+ TOPOLOGY_UPDATE_ECC_OFFSET_PUP4;
+ }
+ }
+ } else {
+ /* PUP4 */
+ if ((ecc_mode[board_id][TOPOLOGY_UPDATE_32BIT_ECC] != 0) ||
+ (ecc_mode[board_id][TOPOLOGY_UPDATE_16BIT_ECC] != 0)) {
+ tui->update_ecc_pup3_mode = 1;
+ tui->ecc_pup_mode_offset =
+ TOPOLOGY_UPDATE_ECC_OFFSET_PUP4;
+ }
+ }
+
+ /*
+ * Check for forbidden ECC mode,
+ * if by default width and pup selection set 32bit ECC mode and this
+ * mode not supported for the board - config 16bit with ECC on PUP3
+ */
+ if ((tui->ecc == TOPOLOGY_UPDATE_ECC_ON) &&
+ (tui->width == TOPOLOGY_UPDATE_WIDTH_32BIT)) {
+ if (ecc_mode[board_id][TOPOLOGY_UPDATE_32BIT_ECC] == 0) {
+ printf("DDR Topology Update: 32bit mode with ECC not allowed on this board, forced 16bit with ECC on PUP3\n");
+ tui->width = TOPOLOGY_UPDATE_WIDTH_16BIT;
+ tui->update_ecc_pup3_mode = 1;
+ tui->ecc_pup_mode_offset =
+ TOPOLOGY_UPDATE_ECC_OFFSET_PUP3;
+ }
+ }
+
+ return MV_OK;
+}
+#endif /* CONFIG_ARMADA_38X */
+#endif /* MV_DDR_TOPOLOGY_UPDATE_FROM_TWSI */
diff --git a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h
new file mode 100644
index 0000000..3e5373c
--- /dev/null
+++ b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h
@@ -0,0 +1,371 @@
+/*
+ * Copyright (C) Marvell International Ltd. and its affiliates
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _SYS_ENV_LIB_H
+#define _SYS_ENV_LIB_H
+
+#include "../../../drivers/ddr/marvell/a38x/ddr3_init.h"
+#include "../../../drivers/ddr/marvell/a38x/ddr3_hws_hw_training.h"
+
+/* Serdes definitions */
+#define COMMON_PHY_BASE_ADDR 0x18300
+
+#define DEVICE_CONFIGURATION_REG0 0x18284
+#define DEVICE_CONFIGURATION_REG1 0x18288
+#define COMMON_PHY_CONFIGURATION1_REG 0x18300
+#define COMMON_PHY_CONFIGURATION2_REG 0x18304
+#define COMMON_PHY_CONFIGURATION4_REG 0x1830c
+#define COMMON_PHY_STATUS1_REG 0x18318
+#define COMMON_PHYS_SELECTORS_REG 0x183fc
+#define SOC_CONTROL_REG1 0x18204
+#define GENERAL_PURPOSE_RESERVED0_REG 0x182e0
+#define GBE_CONFIGURATION_REG 0x18460
+#define DEVICE_SAMPLE_AT_RESET1_REG 0x18600
+#define DEVICE_SAMPLE_AT_RESET2_REG 0x18604
+#define DEV_ID_REG 0x18238
+
+#define CORE_PLL_PARAMETERS_REG 0xe42e0
+#define CORE_PLL_CONFIG_REG 0xe42e4
+
+#define QSGMII_CONTROL_REG1 0x18494
+
+#define DEV_ID_REG_DEVICE_ID_OFFS 16
+#define DEV_ID_REG_DEVICE_ID_MASK 0xffff0000
+
+#define SAR_DEV_ID_OFFS 27
+#define SAR_DEV_ID_MASK 0x7
+
+#define POWER_AND_PLL_CTRL_REG 0xa0004
+#define CALIBRATION_CTRL_REG 0xa0008
+#define DFE_REG0 0xa001c
+#define DFE_REG3 0xa0028
+#define RESET_DFE_REG 0xa0148
+#define LOOPBACK_REG 0xa008c
+#define SYNC_PATTERN_REG 0xa0090
+#define INTERFACE_REG 0xa0094
+#define ISOLATE_REG 0xa0098
+#define MISC_REG 0xa013c
+#define GLUE_REG 0xa0140
+#define GENERATION_DIVIDER_FORCE_REG 0xa0144
+#define PCIE_REG0 0xa0120
+#define LANE_ALIGN_REG0 0xa0124
+#define SQUELCH_FFE_SETTING_REG 0xa0018
+#define G1_SETTINGS_0_REG 0xa0034
+#define G1_SETTINGS_1_REG 0xa0038
+#define G1_SETTINGS_3_REG 0xa0440
+#define G1_SETTINGS_4_REG 0xa0444
+#define G2_SETTINGS_0_REG 0xa003c
+#define G2_SETTINGS_1_REG 0xa0040
+#define G2_SETTINGS_2_REG 0xa00f8
+#define G2_SETTINGS_3_REG 0xa0448
+#define G2_SETTINGS_4_REG 0xa044c
+#define G3_SETTINGS_0_REG 0xa0044
+#define G3_SETTINGS_1_REG 0xa0048
+#define G3_SETTINGS_3_REG 0xa0450
+#define G3_SETTINGS_4_REG 0xa0454
+#define VTHIMPCAL_CTRL_REG 0xa0104
+#define REF_REG0 0xa0134
+#define CAL_REG6 0xa0168
+#define RX_REG2 0xa0184
+#define RX_REG3 0xa0188
+#define PCIE_REG1 0xa0288
+#define PCIE_REG3 0xa0290
+#define LANE_CFG1_REG 0xa0604
+#define LANE_CFG4_REG 0xa0620
+#define LANE_CFG5_REG 0xa0624
+#define GLOBAL_CLK_CTRL 0xa0704
+#define GLOBAL_MISC_CTRL 0xa0718
+#define GLOBAL_CLK_SRC_HI 0xa0710
+
+#define GLOBAL_CLK_CTRL 0xa0704
+#define GLOBAL_MISC_CTRL 0xa0718
+#define GLOBAL_PM_CTRL 0xa0740
+
+/* SATA registers */
+#define SATA_CTRL_REG_IND_ADDR 0xa80a0
+#define SATA_CTRL_REG_IND_DATA 0xa80a4
+
+#define SATA_VENDOR_PORT_0_REG_ADDR 0xa8178
+#define SATA_VENDOR_PORT_1_REG_ADDR 0xa81f8
+#define SATA_VENDOR_PORT_0_REG_DATA 0xa817c
+#define SATA_VENDOR_PORT_1_REG_DATA 0xa81fc
+
+/* Reference clock values and mask */
+#define POWER_AND_PLL_CTRL_REG_100MHZ_VAL 0x0
+#define POWER_AND_PLL_CTRL_REG_25MHZ_VAL_1 0x1
+#define POWER_AND_PLL_CTRL_REG_25MHZ_VAL_2 0x2
+#define POWER_AND_PLL_CTRL_REG_40MHZ_VAL 0x3
+#define GLOBAL_PM_CTRL_REG_25MHZ_VAL 0x7
+#define GLOBAL_PM_CTRL_REG_40MHZ_VAL 0xc
+#define LANE_CFG4_REG_25MHZ_VAL 0x200
+#define LANE_CFG4_REG_40MHZ_VAL 0x300
+
+#define POWER_AND_PLL_CTRL_REG_MASK (~(0x1f))
+#define GLOBAL_PM_CTRL_REG_MASK (~(0xff))
+#define LANE_CFG4_REG_MASK (~(0x1f00))
+
+#define REF_CLK_SELECTOR_VAL_PEX0(reg_val) (reg_val >> 2) & 0x1
+#define REF_CLK_SELECTOR_VAL_PEX1(reg_val) (reg_val >> 3) & 0x1
+#define REF_CLK_SELECTOR_VAL_PEX2(reg_val) (reg_val >> 30) & 0x1
+#define REF_CLK_SELECTOR_VAL_PEX3(reg_val) (reg_val >> 31) & 0x1
+#define REF_CLK_SELECTOR_VAL(reg_val) (reg_val & 0x1)
+
+#define MAX_SELECTOR_VAL 10
+
+/* TWSI addresses */
+/* starting from A38x A0, i2c address of EEPROM is 0x57 */
+#ifdef CONFIG_ARMADA_39X
+#define EEPROM_I2C_ADDR 0x50
+#else
+#define EEPROM_I2C_ADDR (sys_env_device_rev_get() == \
+ MV_88F68XX_Z1_ID ? 0x50 : 0x57)
+#endif
+#define RD_GET_MODE_ADDR 0x4c
+#define DB_GET_MODE_SLM1363_ADDR 0x25
+#define DB_GET_MODE_SLM1364_ADDR 0x24
+#define DB381_GET_MODE_SLM1426_1427_ADDR 0x56
+
+/* DB-BP Board 'SatR' mapping */
+#define SATR_DB_LANE1_MAX_OPTIONS 7
+#define SATR_DB_LANE1_CFG_MASK 0x7
+#define SATR_DB_LANE1_CFG_OFFSET 0
+#define SATR_DB_LANE2_MAX_OPTIONS 4
+#define SATR_DB_LANE2_CFG_MASK 0x38
+#define SATR_DB_LANE2_CFG_OFFSET 3
+
+/* GP Board 'SatR' mapping */
+#define SATR_GP_LANE1_CFG_MASK 0x4
+#define SATR_GP_LANE1_CFG_OFFSET 2
+#define SATR_GP_LANE2_CFG_MASK 0x8
+#define SATR_GP_LANE2_CFG_OFFSET 3
+
+/* For setting MPP2 and MPP3 to be TWSI mode and MPP 0,1 to UART mode */
+#define MPP_CTRL_REG 0x18000
+#define MPP_SET_MASK (~(0xffff))
+#define MPP_SET_DATA (0x1111)
+#define MPP_UART1_SET_MASK (~(0xff000))
+#define MPP_UART1_SET_DATA (0x66000)
+
+#define AVS_DEBUG_CNTR_REG 0xe4124
+#define AVS_DEBUG_CNTR_DEFAULT_VALUE 0x08008073
+
+#define AVS_ENABLED_CONTROL 0xe4130
+#define AVS_LOW_VDD_LIMIT_OFFS 4
+#define AVS_LOW_VDD_LIMIT_MASK (0xff << AVS_LOW_VDD_LIMIT_OFFS)
+#define AVS_LOW_VDD_LIMIT_VAL (0x27 << AVS_LOW_VDD_LIMIT_OFFS)
+
+#define AVS_HIGH_VDD_LIMIT_OFFS 12
+#define AVS_HIGH_VDD_LIMIT_MASK (0xff << AVS_HIGH_VDD_LIMIT_OFFS)
+#define AVS_HIGH_VDD_LIMIT_VAL (0x27 << AVS_HIGH_VDD_LIMIT_OFFS)
+
+/* Board ID numbers */
+#define MARVELL_BOARD_ID_MASK 0x10
+/* Customer boards for A38x */
+#define A38X_CUSTOMER_BOARD_ID_BASE 0x0
+#define A38X_CUSTOMER_BOARD_ID0 (A38X_CUSTOMER_BOARD_ID_BASE + 0)
+#define A38X_CUSTOMER_BOARD_ID1 (A38X_CUSTOMER_BOARD_ID_BASE + 1)
+#define A38X_MV_MAX_CUSTOMER_BOARD_ID (A38X_CUSTOMER_BOARD_ID_BASE + 2)
+#define A38X_MV_CUSTOMER_BOARD_NUM (A38X_MV_MAX_CUSTOMER_BOARD_ID - \
+ A38X_CUSTOMER_BOARD_ID_BASE)
+
+/* Marvell boards for A38x */
+#define A38X_MARVELL_BOARD_ID_BASE 0x10
+#define RD_NAS_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 0)
+#define DB_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 1)
+#define RD_AP_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 2)
+#define DB_AP_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 3)
+#define DB_GP_68XX_ID (A38X_MARVELL_BOARD_ID_BASE + 4)
+#define DB_BP_6821_ID (A38X_MARVELL_BOARD_ID_BASE + 5)
+#define DB_AMC_6820_ID (A38X_MARVELL_BOARD_ID_BASE + 6)
+#define A38X_MV_MAX_MARVELL_BOARD_ID (A38X_MARVELL_BOARD_ID_BASE + 7)
+#define A38X_MV_MARVELL_BOARD_NUM (A38X_MV_MAX_MARVELL_BOARD_ID - \
+ A38X_MARVELL_BOARD_ID_BASE)
+
+/* Customer boards for A39x */
+#define A39X_CUSTOMER_BOARD_ID_BASE 0x20
+#define A39X_CUSTOMER_BOARD_ID0 (A39X_CUSTOMER_BOARD_ID_BASE + 0)
+#define A39X_CUSTOMER_BOARD_ID1 (A39X_CUSTOMER_BOARD_ID_BASE + 1)
+#define A39X_MV_MAX_CUSTOMER_BOARD_ID (A39X_CUSTOMER_BOARD_ID_BASE + 2)
+#define A39X_MV_CUSTOMER_BOARD_NUM (A39X_MV_MAX_CUSTOMER_BOARD_ID - \
+ A39X_CUSTOMER_BOARD_ID_BASE)
+
+/* Marvell boards for A39x */
+#define A39X_MARVELL_BOARD_ID_BASE 0x30
+#define A39X_DB_69XX_ID (A39X_MARVELL_BOARD_ID_BASE + 0)
+#define A39X_RD_69XX_ID (A39X_MARVELL_BOARD_ID_BASE + 1)
+#define A39X_MV_MAX_MARVELL_BOARD_ID (A39X_MARVELL_BOARD_ID_BASE + 2)
+#define A39X_MV_MARVELL_BOARD_NUM (A39X_MV_MAX_MARVELL_BOARD_ID - \
+ A39X_MARVELL_BOARD_ID_BASE)
+
+#ifdef CONFIG_ARMADA_38X
+#define CUTOMER_BOARD_ID_BASE A38X_CUSTOMER_BOARD_ID_BASE
+#define CUSTOMER_BOARD_ID0 A38X_CUSTOMER_BOARD_ID0
+#define CUSTOMER_BOARD_ID1 A38X_CUSTOMER_BOARD_ID1
+#define MV_MAX_CUSTOMER_BOARD_ID A38X_MV_MAX_CUSTOMER_BOARD_ID
+#define MV_CUSTOMER_BOARD_NUM A38X_MV_CUSTOMER_BOARD_NUM
+#define MARVELL_BOARD_ID_BASE A38X_MARVELL_BOARD_ID_BASE
+#define MV_MAX_MARVELL_BOARD_ID A38X_MV_MAX_MARVELL_BOARD_ID
+#define MV_MARVELL_BOARD_NUM A38X_MV_MARVELL_BOARD_NUM
+#define MV_DEFAULT_BOARD_ID DB_68XX_ID
+#define MV_DEFAULT_DEVICE_ID MV_6811
+#elif defined(CONFIG_ARMADA_39X)
+#define CUTOMER_BOARD_ID_BASE A39X_CUSTOMER_BOARD_ID_BASE
+#define CUSTOMER_BOARD_ID0 A39X_CUSTOMER_BOARD_ID0
+#define CUSTOMER_BOARD_ID1 A39X_CUSTOMER_BOARD_ID1
+#define MV_MAX_CUSTOMER_BOARD_ID A39X_MV_MAX_CUSTOMER_BOARD_ID
+#define MV_CUSTOMER_BOARD_NUM A39X_MV_CUSTOMER_BOARD_NUM
+#define MARVELL_BOARD_ID_BASE A39X_MARVELL_BOARD_ID_BASE
+#define MV_MAX_MARVELL_BOARD_ID A39X_MV_MAX_MARVELL_BOARD_ID
+#define MV_MARVELL_BOARD_NUM A39X_MV_MARVELL_BOARD_NUM
+#define MV_DEFAULT_BOARD_ID A39X_DB_69XX_ID
+#define MV_DEFAULT_DEVICE_ID MV_6920
+#endif
+
+#define MV_INVALID_BOARD_ID 0xffffffff
+
+/* device revesion */
+#define DEV_VERSION_ID_REG 0x1823c
+#define REVISON_ID_OFFS 8
+#define REVISON_ID_MASK 0xf00
+
+/* A38x revisions */
+#define MV_88F68XX_Z1_ID 0x0
+#define MV_88F68XX_A0_ID 0x4
+/* A39x revisions */
+#define MV_88F69XX_Z1_ID 0x2
+
+#define MPP_CONTROL_REG(id) (0x18000 + (id * 4))
+#define GPP_DATA_OUT_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x00)
+#define GPP_DATA_OUT_EN_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x04)
+#define GPP_DATA_IN_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x10)
+#define MV_GPP_REGS_BASE(unit) (0x18100 + ((unit) * 0x40))
+
+#define MPP_REG_NUM(GPIO_NUM) (GPIO_NUM / 8)
+#define MPP_MASK(GPIO_NUM) (0xf << 4 * (GPIO_NUM - \
+ (MPP_REG_NUM(GPIO_NUM) * 8)));
+#define GPP_REG_NUM(GPIO_NUM) (GPIO_NUM / 32)
+#define GPP_MASK(GPIO_NUM) (1 << GPIO_NUM % 32)
+
+/* device ID */
+/* Armada 38x Family */
+#define MV_6810_DEV_ID 0x6810
+#define MV_6811_DEV_ID 0x6811
+#define MV_6820_DEV_ID 0x6820
+#define MV_6828_DEV_ID 0x6828
+/* Armada 39x Family */
+#define MV_6920_DEV_ID 0x6920
+#define MV_6928_DEV_ID 0x6928
+
+enum {
+ MV_6810,
+ MV_6820,
+ MV_6811,
+ MV_6828,
+ MV_NONE,
+ MV_6920,
+ MV_6928,
+ MV_MAX_DEV_ID,
+};
+
+#define MV_6820_INDEX 0
+#define MV_6810_INDEX 1
+#define MV_6811_INDEX 2
+#define MV_6828_INDEX 3
+
+#define MV_6920_INDEX 0
+#define MV_6928_INDEX 1
+
+#ifdef CONFIG_ARMADA_38X
+#define MAX_DEV_ID_NUM 4
+#else
+#define MAX_DEV_ID_NUM 2
+#endif
+
+#define MV_6820_INDEX 0
+#define MV_6810_INDEX 1
+#define MV_6811_INDEX 2
+#define MV_6828_INDEX 3
+#define MV_6920_INDEX 0
+#define MV_6928_INDEX 1
+
+enum unit_id {
+ PEX_UNIT_ID,
+ ETH_GIG_UNIT_ID,
+ USB3H_UNIT_ID,
+ USB3D_UNIT_ID,
+ SATA_UNIT_ID,
+ QSGMII_UNIT_ID,
+ XAUI_UNIT_ID,
+ RXAUI_UNIT_ID,
+ MAX_UNITS_ID
+};
+
+struct board_wakeup_gpio {
+ u32 board_id;
+ int gpio_num;
+};
+
+enum suspend_wakeup_status {
+ SUSPEND_WAKEUP_DISABLED,
+ SUSPEND_WAKEUP_ENABLED,
+ SUSPEND_WAKEUP_ENABLED_GPIO_DETECTED,
+};
+
+/*
+ * GPIO status indication for Suspend Wakeup:
+ * If suspend to RAM is supported and GPIO inidcation is implemented,
+ * set the gpio number
+ * If suspend to RAM is supported but GPIO indication is not implemented
+ * set '-2'
+ * If suspend to RAM is not supported set '-1'
+ */
+#ifdef CONFIG_CUSTOMER_BOARD_SUPPORT
+#ifdef CONFIG_ARMADA_38X
+#define MV_BOARD_WAKEUP_GPIO_INFO { \
+ {A38X_CUSTOMER_BOARD_ID0, -1 }, \
+ {A38X_CUSTOMER_BOARD_ID0, -1 }, \
+};
+#else
+#define MV_BOARD_WAKEUP_GPIO_INFO { \
+ {A39X_CUSTOMER_BOARD_ID0, -1 }, \
+ {A39X_CUSTOMER_BOARD_ID0, -1 }, \
+};
+#endif /* CONFIG_ARMADA_38X */
+
+#else
+
+#ifdef CONFIG_ARMADA_38X
+#define MV_BOARD_WAKEUP_GPIO_INFO { \
+ {RD_NAS_68XX_ID, -2 }, \
+ {DB_68XX_ID, -1 }, \
+ {RD_AP_68XX_ID, -2 }, \
+ {DB_AP_68XX_ID, -2 }, \
+ {DB_GP_68XX_ID, -2 }, \
+ {DB_BP_6821_ID, -2 }, \
+ {DB_AMC_6820_ID, -2 }, \
+};
+#else
+#define MV_BOARD_WAKEUP_GPIO_INFO { \
+ {A39X_RD_69XX_ID, -1 }, \
+ {A39X_DB_69XX_ID, -1 }, \
+};
+#endif /* CONFIG_ARMADA_38X */
+#endif /* CONFIG_CUSTOMER_BOARD_SUPPORT */
+
+u32 mv_board_tclk_get(void);
+u32 mv_board_id_get(void);
+u32 mv_board_id_index_get(u32 board_id);
+u32 sys_env_unit_max_num_get(enum unit_id unit);
+enum suspend_wakeup_status sys_env_suspend_wakeup_check(void);
+u8 sys_env_device_rev_get(void);
+u32 sys_env_device_id_get(void);
+u16 sys_env_model_get(void);
+struct dlb_config *sys_env_dlb_config_ptr_get(void);
+u32 sys_env_get_topology_update_info(
+ struct topology_update_info *topology_update_info);
+u32 sys_env_get_cs_ena_from_reg(void);
+
+#endif /* _SYS_ENV_LIB_H */