summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAlex Waterman <awaterman@dawning.com>2011-05-19 15:08:36 -0400
committerScott Wood <scottwood@freescale.com>2011-07-01 15:56:52 -0500
commiteced4626e4d8ea2fd2662045dc7aad0f07db7a41 (patch)
treeb69ea937b15426b9a4c19521ee5f8420531cee84
parentc9494866df835bcee68e17339aec1090faa704da (diff)
downloadu-boot-imx-eced4626e4d8ea2fd2662045dc7aad0f07db7a41.zip
u-boot-imx-eced4626e4d8ea2fd2662045dc7aad0f07db7a41.tar.gz
u-boot-imx-eced4626e4d8ea2fd2662045dc7aad0f07db7a41.tar.bz2
NAND: Add 16bit NAND support for the NDFC
This patch adds support for 16 bit NAND devices attached to the NDFC on ppc4xx processors. Two config entries were added: CONFIG_SYS_NDFC_16 - Setting this tells the NDFC that a 16 bit device is attached. CONFIG_SYS_NDFC_EBC0_CFG - This is for the External Bus Controller configuration register. Also, a new ndfc_read_byte() function was added which does not first convert the data to little endian. The NAND SPL was also modified to do 16bit bad block testing when a 16 bit chip is being used. Signed-off-by: Alex Waterman <awaterman@dawning.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
-rw-r--r--README8
-rw-r--r--drivers/mtd/nand/ndfc.c33
-rw-r--r--nand_spl/nand_boot.c11
3 files changed, 45 insertions, 7 deletions
diff --git a/README b/README
index 446966d..a760cf3 100644
--- a/README
+++ b/README
@@ -2917,6 +2917,14 @@ Low Level (hardware related) configuration options:
- CONFIG_SYS_SRIOn_MEM_SIZE:
Size of SRIO port 'n' memory region
+- CONFIG_SYS_NDFC_16
+ Defined to tell the NDFC that the NAND chip is using a
+ 16 bit bus.
+
+- CONFIG_SYS_NDFC_EBC0_CFG
+ Sets the EBC0_CFG register for the NDFC. If not defined
+ a default value will be used.
+
- CONFIG_SPD_EEPROM
Get DDR timing information from an I2C EEPROM. Common
with pluggable memory modules such as SODIMMs
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index 0729e0c..6ebbb5e 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -37,6 +37,13 @@
#include <asm/io.h>
#include <asm/ppc4xx.h>
+#ifndef CONFIG_SYS_NAND_BCR
+#define CONFIG_SYS_NAND_BCR 0x80002222
+#endif
+#ifndef CONFIG_SYS_NDFC_EBC0_CFG
+#define CONFIG_SYS_NDFC_EBC0_CFG 0xb8400000
+#endif
+
/*
* We need to store the info, which chip-select (CS) is used for the
* chip number. For example on Sequoia NAND chip #0 uses
@@ -140,12 +147,25 @@ static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len
return 0;
}
-#endif /* #ifndef CONFIG_NAND_SPL */
-#ifndef CONFIG_SYS_NAND_BCR
-#define CONFIG_SYS_NAND_BCR 0x80002222
+/*
+ * Read a byte from the NDFC.
+ */
+static uint8_t ndfc_read_byte(struct mtd_info *mtd)
+{
+
+ struct nand_chip *chip = mtd->priv;
+
+#ifdef CONFIG_SYS_NDFC_16BIT
+ return (uint8_t) readw(chip->IO_ADDR_R);
+#else
+ return readb(chip->IO_ADDR_R);
#endif
+}
+
+#endif /* #ifndef CONFIG_NAND_SPL */
+
void board_nand_select_device(struct nand_chip *nand, int chip)
{
/*
@@ -198,16 +218,21 @@ int board_nand_init(struct nand_chip *nand)
nand->ecc.bytes = 3;
nand->select_chip = ndfc_select_chip;
+#ifdef CONFIG_SYS_NDFC_16BIT
+ nand->options |= NAND_BUSWIDTH_16;
+#endif
+
#ifndef CONFIG_NAND_SPL
nand->write_buf = ndfc_write_buf;
nand->verify_buf = ndfc_verify_buf;
+ nand->read_byte = ndfc_read_byte;
chip++;
#else
/*
* Setup EBC (CS0 only right now)
*/
- mtebc(EBC0_CFG, 0xb8400000);
+ mtebc(EBC0_CFG, CONFIG_SYS_NDFC_EBC0_CFG);
mtebc(PB0CR, CONFIG_SYS_EBC_PB0CR);
mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP);
diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c
index 9545a9a..4683c7c 100644
--- a/nand_spl/nand_boot.c
+++ b/nand_spl/nand_boot.c
@@ -122,10 +122,15 @@ static int nand_is_bad_block(struct mtd_info *mtd, int block)
nand_command(mtd, block, 0, CONFIG_SYS_NAND_BAD_BLOCK_POS, NAND_CMD_READOOB);
/*
- * Read one byte
+ * Read one byte (or two if it's a 16 bit chip).
*/
- if (readb(this->IO_ADDR_R) != 0xff)
- return 1;
+ if (this->options & NAND_BUSWIDTH_16) {
+ if (readw(this->IO_ADDR_R) != 0xffff)
+ return 1;
+ } else {
+ if (readb(this->IO_ADDR_R) != 0xff)
+ return 1;
+ }
return 0;
}