summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMasahiro Yamada <yamada.m@jp.panasonic.com>2014-12-15 23:26:31 +0900
committerTom Rini <trini@ti.com>2015-01-05 12:08:55 -0500
commitd622ac39274a949b6445f1bfd92dc1644014388b (patch)
treef2f2f587edee722bf5fb6634e4c8e09b9d89592c
parent9067b30008e4c09fb6287d306caf2a6bed08370f (diff)
downloadu-boot-imx-d622ac39274a949b6445f1bfd92dc1644014388b.zip
u-boot-imx-d622ac39274a949b6445f1bfd92dc1644014388b.tar.gz
u-boot-imx-d622ac39274a949b6445f1bfd92dc1644014388b.tar.bz2
powerpc: mpc824x: remove MPC824X cpu support
All the MPC824X boards are still non-generic boards: A3000, CPC45, CU824, eXalion, MVBLUE, MUSENKI, Sandpoint824x, utx8245 Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Josef Wagner <Wagner@Microsys.de> Cc: Torsten Demke <torsten.demke@fci.com> Cc: Jim Thompson <jim@musenki.com> Cc: Greg Allen <gallen@arlut.utexas.edu>
-rwxr-xr-xMAKEALL6
-rw-r--r--README5
-rw-r--r--arch/powerpc/Kconfig4
-rw-r--r--arch/powerpc/cpu/mpc824x/Kconfig48
-rw-r--r--arch/powerpc/cpu/mpc824x/Makefile11
-rw-r--r--arch/powerpc/cpu/mpc824x/config.mk8
-rw-r--r--arch/powerpc/cpu/mpc824x/cpu.c262
-rw-r--r--arch/powerpc/cpu/mpc824x/cpu_init.c311
-rw-r--r--arch/powerpc/cpu/mpc824x/drivers/epic.h1
-rw-r--r--arch/powerpc/cpu/mpc824x/drivers/epic/README102
-rw-r--r--arch/powerpc/cpu/mpc824x/drivers/epic/epic.h163
-rw-r--r--arch/powerpc/cpu/mpc824x/drivers/epic/epic1.c517
-rw-r--r--arch/powerpc/cpu/mpc824x/drivers/epic/epic2.S196
-rw-r--r--arch/powerpc/cpu/mpc824x/drivers/epic/epicutil.S57
-rw-r--r--arch/powerpc/cpu/mpc824x/drivers/errors.h212
-rw-r--r--arch/powerpc/cpu/mpc824x/drivers/i2c/i2c.c254
-rw-r--r--arch/powerpc/cpu/mpc824x/interrupts.c77
-rw-r--r--arch/powerpc/cpu/mpc824x/pci.c75
-rw-r--r--arch/powerpc/cpu/mpc824x/speed.c102
-rw-r--r--arch/powerpc/cpu/mpc824x/start.S724
-rw-r--r--arch/powerpc/cpu/mpc824x/traps.c194
-rw-r--r--arch/powerpc/cpu/mpc824x/u-boot.lds76
-rw-r--r--arch/powerpc/include/asm/processor.h2
-rw-r--r--board/a3000/Kconfig9
-rw-r--r--board/a3000/MAINTAINERS6
-rw-r--r--board/a3000/Makefile8
-rw-r--r--board/a3000/README17
-rw-r--r--board/a3000/a3000.c101
-rw-r--r--board/a3000/flash.c438
-rw-r--r--board/cpc45/Kconfig9
-rw-r--r--board/cpc45/MAINTAINERS7
-rw-r--r--board/cpc45/Makefile8
-rw-r--r--board/cpc45/cpc45.c250
-rw-r--r--board/cpc45/flash.c506
-rw-r--r--board/cpc45/ide.c128
-rw-r--r--board/cpc45/pd67290.c797
-rw-r--r--board/cpc45/plx9030.c156
-rw-r--r--board/cu824/Kconfig9
-rw-r--r--board/cu824/MAINTAINERS6
-rw-r--r--board/cu824/Makefile8
-rw-r--r--board/cu824/README453
-rw-r--r--board/cu824/cu824.c83
-rw-r--r--board/cu824/flash.c470
-rw-r--r--board/eXalion/Kconfig9
-rw-r--r--board/eXalion/MAINTAINERS6
-rw-r--r--board/eXalion/Makefile8
-rw-r--r--board/eXalion/eXalion.c283
-rw-r--r--board/eXalion/eXalion.h36
-rw-r--r--board/eXalion/piix_pci.h156
-rw-r--r--board/musenki/Kconfig9
-rw-r--r--board/musenki/MAINTAINERS6
-rw-r--r--board/musenki/Makefile8
-rw-r--r--board/musenki/README298
-rw-r--r--board/musenki/flash.c496
-rw-r--r--board/musenki/musenki.c94
-rw-r--r--board/mvblue/Kconfig9
-rw-r--r--board/mvblue/MAINTAINERS6
-rw-r--r--board/mvblue/Makefile8
-rw-r--r--board/mvblue/flash.c570
-rw-r--r--board/mvblue/mvblue.c253
-rw-r--r--board/mvblue/u-boot.lds86
-rw-r--r--board/sandpoint/Kconfig19
-rw-r--r--board/sandpoint/MAINTAINERS12
-rw-r--r--board/sandpoint/Makefile8
-rw-r--r--board/sandpoint/README411
-rw-r--r--board/sandpoint/dinkdl2
-rw-r--r--board/sandpoint/flash.c748
-rw-r--r--board/sandpoint/sandpoint.c91
-rw-r--r--board/sandpoint/u-boot.lds84
-rw-r--r--board/utx8245/Kconfig9
-rw-r--r--board/utx8245/MAINTAINERS6
-rw-r--r--board/utx8245/Makefile13
-rw-r--r--board/utx8245/flash.c544
-rw-r--r--board/utx8245/utx8245.c119
-rw-r--r--common/cmd_pcmcia.c3
-rw-r--r--configs/A3000_defconfig3
-rw-r--r--configs/CPC45_ROMBOOT_defconfig4
-rw-r--r--configs/CPC45_defconfig3
-rw-r--r--configs/CU824_defconfig3
-rw-r--r--configs/MUSENKI_defconfig3
-rw-r--r--configs/MVBLUE_defconfig3
-rw-r--r--configs/Sandpoint8240_defconfig3
-rw-r--r--configs/Sandpoint8245_defconfig3
-rw-r--r--configs/eXalion_defconfig3
-rw-r--r--configs/utx8245_defconfig3
-rw-r--r--doc/README.scrapyard9
-rw-r--r--drivers/pcmcia/Makefile1
-rw-r--r--drivers/pcmcia/i82365.c989
-rw-r--r--include/configs/A3000.h293
-rw-r--r--include/configs/CPC45.h489
-rw-r--r--include/configs/CU824.h286
-rw-r--r--include/configs/MUSENKI.h275
-rw-r--r--include/configs/MVBLUE.h325
-rw-r--r--include/configs/Sandpoint8240.h398
-rw-r--r--include/configs/Sandpoint8245.h376
-rw-r--r--include/configs/eXalion.h433
-rw-r--r--include/configs/utx8245.h408
-rw-r--r--include/mpc824x.h523
-rw-r--r--include/pci.h4
-rw-r--r--include/pcmcia/cirrus.h180
-rw-r--r--include/pcmcia/i82365.h154
-rw-r--r--include/pcmcia/ss.h133
-rw-r--r--include/pcmcia/ti113x.h234
-rw-r--r--include/ppc_asm.tmpl4
-rw-r--r--post/drivers/memory.c2
105 files changed, 12 insertions, 16821 deletions
diff --git a/MAKEALL b/MAKEALL
index 7c16319..4d643d1 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -292,12 +292,6 @@ LIST_8xx="$(targets_by_cpu mpc8xx)"
LIST_4xx="$(targets_by_cpu ppc4xx)"
#########################################################################
-## MPC824x Systems
-#########################################################################
-
-LIST_824x="$(targets_by_cpu mpc824x)"
-
-#########################################################################
## MPC8260 Systems (includes 8250, 8255 etc.)
#########################################################################
diff --git a/README b/README
index 604f0fa..00cd055 100644
--- a/README
+++ b/README
@@ -186,7 +186,6 @@ Directory Hierarchy:
/mpc5xx Files specific to Freescale MPC5xx CPUs
/mpc5xxx Files specific to Freescale MPC5xxx CPUs
/mpc8xx Files specific to Freescale MPC8xx CPUs
- /mpc824x Files specific to Freescale MPC824x CPUs
/mpc8260 Files specific to Freescale MPC8260 CPUs
/mpc85xx Files specific to Freescale MPC85xx CPUs
/ppc4xx Files specific to AMCC PowerPC 4xx CPUs
@@ -326,10 +325,6 @@ The following options need to be configured:
multiple fs option at one time
for marvell soc family
-- MPC824X Family Member (if CONFIG_MPC824X is defined)
- Define exactly one of
- CONFIG_MPC8240, CONFIG_MPC8245
-
- 8xx CPU Options: (if using an MPC8xx CPU)
CONFIG_8xx_GCLK_FREQ - deprecated: CPU clock if
get_gclk_freq() cannot work
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 6f96c7c..7a50301 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -19,9 +19,6 @@ config 5xx
config MPC5xxx
bool "MPC5xxx"
-config MPC824X
- bool "MPC824X"
-
config MPC8260
bool "MPC8260"
@@ -46,7 +43,6 @@ source "arch/powerpc/cpu/74xx_7xx/Kconfig"
source "arch/powerpc/cpu/mpc512x/Kconfig"
source "arch/powerpc/cpu/mpc5xx/Kconfig"
source "arch/powerpc/cpu/mpc5xxx/Kconfig"
-source "arch/powerpc/cpu/mpc824x/Kconfig"
source "arch/powerpc/cpu/mpc8260/Kconfig"
source "arch/powerpc/cpu/mpc83xx/Kconfig"
source "arch/powerpc/cpu/mpc85xx/Kconfig"
diff --git a/arch/powerpc/cpu/mpc824x/Kconfig b/arch/powerpc/cpu/mpc824x/Kconfig
deleted file mode 100644
index 4f98423..0000000
--- a/arch/powerpc/cpu/mpc824x/Kconfig
+++ /dev/null
@@ -1,48 +0,0 @@
-menu "mpc824x CPU"
- depends on MPC824X
-
-config SYS_CPU
- default "mpc824x"
-
-choice
- prompt "Target select"
-
-config TARGET_A3000
- bool "Support A3000"
-
-config TARGET_CPC45
- bool "Support CPC45"
-
-config TARGET_CU824
- bool "Support CU824"
-
-config TARGET_EXALION
- bool "Support eXalion"
-
-config TARGET_MUSENKI
- bool "Support MUSENKI"
-
-config TARGET_MVBLUE
- bool "Support MVBLUE"
-
-config TARGET_SANDPOINT8240
- bool "Support Sandpoint8240"
-
-config TARGET_SANDPOINT8245
- bool "Support Sandpoint8245"
-
-config TARGET_UTX8245
- bool "Support utx8245"
-
-endchoice
-
-source "board/a3000/Kconfig"
-source "board/cpc45/Kconfig"
-source "board/cu824/Kconfig"
-source "board/eXalion/Kconfig"
-source "board/musenki/Kconfig"
-source "board/mvblue/Kconfig"
-source "board/sandpoint/Kconfig"
-source "board/utx8245/Kconfig"
-
-endmenu
diff --git a/arch/powerpc/cpu/mpc824x/Makefile b/arch/powerpc/cpu/mpc824x/Makefile
deleted file mode 100644
index 2c8be92..0000000
--- a/arch/powerpc/cpu/mpc824x/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-extra-y = start.o
-obj-y = traps.o cpu.o cpu_init.o interrupts.o speed.o \
- drivers/epic/epic1.o drivers/i2c/i2c.o pci.o
-obj-y += ../mpc8260/bedbug_603e.o
diff --git a/arch/powerpc/cpu/mpc824x/config.mk b/arch/powerpc/cpu/mpc824x/config.mk
deleted file mode 100644
index ecfb07e..0000000
--- a/arch/powerpc/cpu/mpc824x/config.mk
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2010
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -mstring -mcpu=603e -msoft-float
diff --git a/arch/powerpc/cpu/mpc824x/cpu.c b/arch/powerpc/cpu/mpc824x/cpu.c
deleted file mode 100644
index eaa4e87..0000000
--- a/arch/powerpc/cpu/mpc824x/cpu.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * (C) Copyright 2000 - 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <mpc824x.h>
-#include <common.h>
-#include <command.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkcpu (void)
-{
- unsigned int pvr = get_pvr ();
- unsigned int version = pvr >> 16;
- unsigned char revision;
- ulong clock = gd->cpu_clk;
- char buf[32];
-
- puts ("CPU: ");
-
- switch (version) {
- case CPU_TYPE_8240:
- puts ("MPC8240");
- break;
-
- case CPU_TYPE_8245:
- puts ("MPC8245");
- break;
-
- default:
- return -1; /*not valid for this source */
- }
-
- CONFIG_READ_BYTE (REVID, revision);
-
- if (revision) {
- printf (" Revision %d.%d",
- (revision & 0xf0) >> 4,
- (revision & 0x0f));
- } else {
- return -1; /* no valid CPU revision info */
- }
-
- printf(" at %s MHz: ", strmhz(buf, clock));
-
- print_size(checkicache(), " I-Cache ");
- print_size(checkdcache(), " D-Cache\n");
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-/* L1 i-cache */
-
-int checkicache (void)
-{
- /*TODO*/
- return 128 * 4 * 32;
-};
-
-/* ------------------------------------------------------------------------- */
-/* L1 d-cache */
-
-int checkdcache (void)
-{
- /*TODO*/
- return 128 * 4 * 32;
-
-};
-
-/*------------------------------------------------------------------- */
-
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- ulong msr, addr;
-
- /* Interrupts and MMU off */
- __asm__ ("mtspr 81, 0");
-
- /* Interrupts and MMU off */
- __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
-
- msr &= ~0x1030;
- __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
-
- /*
- * Trying to execute the next instruction at a non-existing address
- * should cause a machine check, resulting in reset
- */
-#ifdef CONFIG_SYS_RESET_ADDRESS
- addr = CONFIG_SYS_RESET_ADDRESS;
-#else
- /*
- * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address,
- * CONFIG_SYS_MONITOR_BASE - sizeof (ulong) is usually a valid
- * address. Better pick an address known to be invalid on
- * your system and assign it to CONFIG_SYS_RESET_ADDRESS.
- * "(ulong)-1" used to be a good choice for many systems...
- */
- addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
-#endif
- ((void (*)(void)) addr) ();
- return 1;
-
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- * This is the sys_logic_clk (memory bus) divided by 4
- */
-unsigned long get_tbclk (void)
-{
- return ((get_bus_freq (0) + 2L) / 4L);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * The MPC824x has an integrated PCI controller known as the MPC107.
- * The following are MPC107 Bridge Controller and PCI Support functions
- *
- */
-
-/*
- * This procedure reads a 32-bit address MPC107 register, and returns
- * a 32 bit value. It swaps the address to little endian before
- * writing it to config address, and swaps the value to big endian
- * before returning to the caller.
- */
-unsigned int mpc824x_mpc107_getreg (unsigned int regNum)
-{
- unsigned int temp;
-
- /* swap the addr. to little endian */
- *(volatile unsigned int *) CHRP_REG_ADDR = PCISWAP (regNum);
- temp = *(volatile unsigned int *) CHRP_REG_DATA;
- return PCISWAP (temp); /* swap the data upon return */
-}
-
-/*
- * This procedure writes a 32-bit address MPC107 register. It swaps
- * the address to little endian before writing it to config address.
- */
-
-void mpc824x_mpc107_setreg (unsigned int regNum, unsigned int regVal)
-{
- /* swap the addr. to little endian */
- *(volatile unsigned int *) CHRP_REG_ADDR = PCISWAP (regNum);
- *(volatile unsigned int *) CHRP_REG_DATA = PCISWAP (regVal);
- return;
-}
-
-
-/*
- * Write a byte (8 bits) to a memory location.
- */
-void mpc824x_mpc107_write8 (unsigned int addr, unsigned char data)
-{
- *(unsigned char *) addr = data;
- __asm__ ("sync");
-}
-
-/*
- * Write a word (16 bits) to a memory location after the value
- * has been byte swapped (big to little endian or vice versa)
- */
-
-void mpc824x_mpc107_write16 (unsigned int address, unsigned short data)
-{
- *(volatile unsigned short *) address = BYTE_SWAP_16_BIT (data);
- __asm__ ("sync");
-}
-
-/*
- * Write a long word (32 bits) to a memory location after the value
- * has been byte swapped (big to little endian or vice versa)
- */
-
-void mpc824x_mpc107_write32 (unsigned int address, unsigned int data)
-{
- *(volatile unsigned int *) address = LONGSWAP (data);
- __asm__ ("sync");
-}
-
-/*
- * Read a byte (8 bits) from a memory location.
- */
-unsigned char mpc824x_mpc107_read8 (unsigned int addr)
-{
- return *(volatile unsigned char *) addr;
-}
-
-
-/*
- * Read a word (16 bits) from a memory location, and byte swap the
- * value before returning to the caller.
- */
-unsigned short mpc824x_mpc107_read16 (unsigned int address)
-{
- unsigned short retVal;
-
- retVal = BYTE_SWAP_16_BIT (*(unsigned short *) address);
- return retVal;
-}
-
-
-/*
- * Read a long word (32 bits) from a memory location, and byte
- * swap the value before returning to the caller.
- */
-unsigned int mpc824x_mpc107_read32 (unsigned int address)
-{
- unsigned int retVal;
-
- retVal = LONGSWAP (*(unsigned int *) address);
- return (retVal);
-}
-
-
-/*
- * Read a register in the Embedded Utilities Memory Block address
- * space.
- * Input: regNum - register number + utility base address. Example,
- * the base address of EPIC is 0x40000, the register number
- * being passed is 0x40000+the address of the target register.
- * (See epic.h for register addresses).
- * Output: The 32 bit little endian value of the register.
- */
-
-unsigned int mpc824x_eummbar_read (unsigned int regNum)
-{
- unsigned int temp;
-
- temp = *(volatile unsigned int *) (EUMBBAR_VAL + regNum);
- temp = PCISWAP (temp);
- return temp;
-}
-
-
-/*
- * Write a value to a register in the Embedded Utilities Memory
- * Block address space.
- * Input: regNum - register number + utility base address. Example,
- * the base address of EPIC is 0x40000, the register
- * number is 0x40000+the address of the target register.
- * (See epic.h for register addresses).
- * regVal - value to be written to the register.
- */
-
-void mpc824x_eummbar_write (unsigned int regNum, unsigned int regVal)
-{
- *(volatile unsigned int *) (EUMBBAR_VAL + regNum) = PCISWAP (regVal);
- return;
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/arch/powerpc/cpu/mpc824x/cpu_init.c b/arch/powerpc/cpu/mpc824x/cpu_init.c
deleted file mode 100644
index 68d88e9..0000000
--- a/arch/powerpc/cpu/mpc824x/cpu_init.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- * (C) Copyright 2000
- * Rob Taylor. Flying Pig Systems. robt@flyingpig.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <mpc824x.h>
-
-#ifndef CONFIG_SYS_BANK0_ROW
-#define CONFIG_SYS_BANK0_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK1_ROW
-#define CONFIG_SYS_BANK1_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK2_ROW
-#define CONFIG_SYS_BANK2_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK3_ROW
-#define CONFIG_SYS_BANK3_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK4_ROW
-#define CONFIG_SYS_BANK4_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK5_ROW
-#define CONFIG_SYS_BANK5_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK6_ROW
-#define CONFIG_SYS_BANK6_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK7_ROW
-#define CONFIG_SYS_BANK7_ROW 0
-#endif
-#ifndef CONFIG_SYS_DBUS_SIZE2
-#define CONFIG_SYS_DBUS_SIZE2 0
-#endif
-
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- */
-void
-cpu_init_f (void)
-{
- register unsigned long val;
- CONFIG_WRITE_HALFWORD(PCICR, 0x06); /* Bus Master, respond to PCI memory space acesses*/
-/* CONFIG_WRITE_HALFWORD(PCISR, 0xffff); */ /*reset PCISR*/
-
-#if defined(CONFIG_MUSENKI)
-/* Why is this here, you ask? Try, just try setting 0x8000
- * in PCIACR with CONFIG_WRITE_HALFWORD()
- * this one was a stumper, and we are annoyed
- */
-
-#define M_CONFIG_WRITE_HALFWORD( addr, data ) \
- __asm__ __volatile__(" \
- stw %2,0(%0)\n \
- sync\n \
- sth %3,2(%1)\n \
- sync\n \
- " \
- : /* no output */ \
- : "r" (CONFIG_ADDR), "r" (CONFIG_DATA), \
- "r" (PCISWAP(addr & ~3)), "r" (PCISWAP(data << 16)) \
- );
-
- M_CONFIG_WRITE_HALFWORD(PCIACR, 0x8000);
-#endif
-
- CONFIG_WRITE_BYTE(PCLSR, 0x8); /* set PCI cache line size */
- CONFIG_WRITE_BYTE (PLTR, 0x40); /* set PCI latency timer */
- /*
- * Note that although this bit is cleared after a hard reset, it
- * must be explicitly set and then cleared by software during
- * initialization in order to guarantee correct operation of the
- * DLL and the SDRAM_CLK[0:3] signals (if they are used).
- */
- CONFIG_READ_BYTE (AMBOR, val);
- CONFIG_WRITE_BYTE(AMBOR, val & 0xDF);
- CONFIG_WRITE_BYTE(AMBOR, val | 0x20);
- CONFIG_WRITE_BYTE(AMBOR, val & 0xDF);
-#ifdef CONFIG_MPC8245
- /* silicon bug 28 MPC8245 */
- CONFIG_READ_BYTE(AMBOR,val);
- CONFIG_WRITE_BYTE(AMBOR,val|0x1);
-
-#if 0
- /*
- * The following bug only affects older (XPC8245) processors.
- * DMA transfers initiated by external devices get corrupted due
- * to a hardware scheduling problem.
- *
- * The effect is:
- * when transferring X words, the first 32 words are transferred
- * OK, the next 3 x 32 words are 'old' data (from previous DMA)
- * while the rest of the X words is xferred fine.
- *
- * Disabling 3 of the 4 32 word hardware buffers solves the problem
- * with no significant performance loss.
- */
-
- CONFIG_READ_BYTE(PCMBCR,val);
- /* in order not to corrupt data which is being read over the PCI bus
- * with the PPC as slave, we need to reduce the number of PCMRBs to 1,
- * 4.11 in the processor user manual
- * */
-
-#if 1
- CONFIG_WRITE_BYTE(PCMBCR,(val|0xC0)); /* 1 PCMRB */
-#else
- CONFIG_WRITE_BYTE(PCMBCR,(val|0x80)); /* 2 PCMRBs */
- CONFIG_WRITE_BYTE(PCMBCR,(val|0x40)); /* 3 PCMRBs */
- /* default, 4 PCMRBs are used */
-#endif
-#endif
-#endif
-
- CONFIG_READ_WORD(PICR1, val);
-#if defined(CONFIG_MPC8240)
- CONFIG_WRITE_WORD( PICR1,
- (val & (PICR1_ADDRESS_MAP | PICR1_RCS0)) |
- PIRC1_MSK | PICR1_PROC_TYPE_603E |
- PICR1_FLASH_WR_EN | PICR1_MCP_EN |
- PICR1_CF_DPARK | PICR1_EN_PCS |
- PICR1_CF_APARK );
-#elif defined(CONFIG_MPC8245)
- CONFIG_WRITE_WORD( PICR1,
- (val & (PICR1_RCS0)) |
- PICR1_PROC_TYPE_603E |
- PICR1_FLASH_WR_EN | PICR1_MCP_EN |
- PICR1_CF_DPARK | PICR1_NO_BUSW_CK |
- PICR1_DEC| PICR1_CF_APARK | 0x10); /* 8245 UM says bit 4 must be set */
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-
- CONFIG_READ_WORD(PICR2, val);
- val= val & ~ (PICR2_CF_SNOOP_WS_MASK | PICR2_CF_APHASE_WS_MASK); /*mask off waitstate bits*/
- val |= PICR2_CF_SNOOP_WS_1WS | PICR2_CF_APHASE_WS_1WS; /*1 wait state*/
- CONFIG_WRITE_WORD(PICR2, val);
-
- CONFIG_WRITE_WORD(EUMBBAR, CONFIG_SYS_EUMB_ADDR);
-#ifndef CONFIG_SYS_RAMBOOT
- CONFIG_WRITE_WORD(MCCR1, (CONFIG_SYS_ROMNAL << MCCR1_ROMNAL_SHIFT) |
- (CONFIG_SYS_BANK0_ROW) |
- (CONFIG_SYS_BANK1_ROW << MCCR1_BANK1ROW_SHIFT) |
- (CONFIG_SYS_BANK2_ROW << MCCR1_BANK2ROW_SHIFT) |
- (CONFIG_SYS_BANK3_ROW << MCCR1_BANK3ROW_SHIFT) |
- (CONFIG_SYS_BANK4_ROW << MCCR1_BANK4ROW_SHIFT) |
- (CONFIG_SYS_BANK5_ROW << MCCR1_BANK5ROW_SHIFT) |
- (CONFIG_SYS_BANK6_ROW << MCCR1_BANK6ROW_SHIFT) |
- (CONFIG_SYS_BANK7_ROW << MCCR1_BANK7ROW_SHIFT) |
- (CONFIG_SYS_ROMFAL << MCCR1_ROMFAL_SHIFT));
-#endif
-
-#if defined(CONFIG_SYS_ASRISE) && defined(CONFIG_SYS_ASFALL)
- CONFIG_WRITE_WORD(MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT |
- CONFIG_SYS_ASRISE << MCCR2_ASRISE_SHIFT |
- CONFIG_SYS_ASFALL << MCCR2_ASFALL_SHIFT);
-#else
- CONFIG_WRITE_WORD(MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT);
-#endif
-
-#if defined(CONFIG_MPC8240)
- CONFIG_WRITE_WORD(MCCR3,
- (((CONFIG_SYS_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
- (CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT) |
- (CONFIG_SYS_RDLAT << MCCR3_RDLAT_SHIFT));
-#elif defined(CONFIG_MPC8245)
- CONFIG_WRITE_WORD(MCCR3,
- (((CONFIG_SYS_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
- (CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT));
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-
-/* this is gross. We think these should all be the same, and various boards
- * should define CONFIG_SYS_ACTORW to 0 if they don't want to set it, or even, if
- * its not set, we define it to zero in this file
- */
-#if defined(CONFIG_CU824)
- CONFIG_WRITE_WORD(MCCR4,
- (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) |
- (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
- MCCR4_BIT21 |
- (CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
- ((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
- (((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) |
- CONFIG_SYS_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) |
- (CONFIG_SYS_ACTORW << MCCR4_ACTTORW_SHIFT) |
- (((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) << MCCR4_BSTOPRE6TO9_SHIFT));
-#elif defined(CONFIG_MPC8240)
- CONFIG_WRITE_WORD(MCCR4,
- (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) |
- (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
- MCCR4_BIT21 |
- (CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
- ((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
- (((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) |
- (CONFIG_SYS_SDMODE_BURSTLEN)) <<MCCR4_SDMODE_SHIFT) |
- (((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT ));
-#elif defined(CONFIG_MPC8245)
- CONFIG_READ_WORD(MCCR1, val);
- val &= MCCR1_DBUS_SIZE0; /* test for 64-bit mem bus */
-
- CONFIG_WRITE_WORD(MCCR4,
- (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) |
- (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
- (CONFIG_SYS_EXTROM ? MCCR4_EXTROM : 0) |
- (CONFIG_SYS_REGDIMM ? MCCR4_REGDIMM : 0) |
- (CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
- ((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
- (CONFIG_SYS_DBUS_SIZE2 << MCCR4_DBUS_SIZE2_SHIFT) |
- (((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) |
- (val ? 2 : 3)) << MCCR4_SDMODE_SHIFT) |
- (CONFIG_SYS_ACTORW << MCCR4_ACTTORW_SHIFT) |
- (((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT ));
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-
- CONFIG_WRITE_WORD(MSAR1,
- ( (CONFIG_SYS_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
- (((CONFIG_SYS_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(EMSAR1,
- ( (CONFIG_SYS_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
- (((CONFIG_SYS_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(MSAR2,
- ( (CONFIG_SYS_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
- (((CONFIG_SYS_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(EMSAR2,
- ( (CONFIG_SYS_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
- (((CONFIG_SYS_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(MEAR1,
- ( (CONFIG_SYS_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
- (((CONFIG_SYS_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(EMEAR1,
- ( (CONFIG_SYS_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
- (((CONFIG_SYS_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(MEAR2,
- ( (CONFIG_SYS_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
- (((CONFIG_SYS_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(EMEAR2,
- ( (CONFIG_SYS_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
- (((CONFIG_SYS_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
-
- CONFIG_WRITE_BYTE(ODCR, CONFIG_SYS_ODCR);
-#ifdef CONFIG_SYS_DLL_MAX_DELAY
- CONFIG_WRITE_BYTE(MIOCR1, CONFIG_SYS_DLL_MAX_DELAY); /* needed to make DLL lock */
-#endif
-#if defined(CONFIG_SYS_DLL_EXTEND) && defined(CONFIG_SYS_PCI_HOLD_DEL)
- CONFIG_WRITE_BYTE(PMCR2, CONFIG_SYS_DLL_EXTEND | CONFIG_SYS_PCI_HOLD_DEL);
-#endif
-#if defined(MIOCR2) && defined(CONFIG_SYS_SDRAM_DSCD)
- CONFIG_WRITE_BYTE(MIOCR2, CONFIG_SYS_SDRAM_DSCD); /* change memory input */
-#endif /* setup & hold time */
-
- CONFIG_WRITE_BYTE(MBER,
- CONFIG_SYS_BANK0_ENABLE |
- (CONFIG_SYS_BANK1_ENABLE << 1) |
- (CONFIG_SYS_BANK2_ENABLE << 2) |
- (CONFIG_SYS_BANK3_ENABLE << 3) |
- (CONFIG_SYS_BANK4_ENABLE << 4) |
- (CONFIG_SYS_BANK5_ENABLE << 5) |
- (CONFIG_SYS_BANK6_ENABLE << 6) |
- (CONFIG_SYS_BANK7_ENABLE << 7));
-
-#ifdef CONFIG_SYS_PGMAX
- CONFIG_WRITE_BYTE(MPMR, CONFIG_SYS_PGMAX);
-#endif
-
- /* ! Wait 200us before initialize other registers */
- /*FIXME: write a decent udelay wait */
- __asm__ __volatile__(
- " mtctr %0 \n \
- 0: bdnz 0b\n"
- :
- : "r" (0x10000));
-
- CONFIG_READ_WORD(MCCR1, val);
- CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */
- __asm__ __volatile__("eieio");
-}
-
-/*
- * initialize higher level parts of CPU like time base and timers
- */
-int cpu_init_r (void)
-{
- return (0);
-}
diff --git a/arch/powerpc/cpu/mpc824x/drivers/epic.h b/arch/powerpc/cpu/mpc824x/drivers/epic.h
deleted file mode 100644
index 2803f63..0000000
--- a/arch/powerpc/cpu/mpc824x/drivers/epic.h
+++ /dev/null
@@ -1 +0,0 @@
-#include "epic/epic.h"
diff --git a/arch/powerpc/cpu/mpc824x/drivers/epic/README b/arch/powerpc/cpu/mpc824x/drivers/epic/README
deleted file mode 100644
index 5798996..0000000
--- a/arch/powerpc/cpu/mpc824x/drivers/epic/README
+++ /dev/null
@@ -1,102 +0,0 @@
-CONTENT:
-
- epic.h
- epic1.c
- epic2.s
-
-WHAT ARE THESE FILES:
-
-These files contain MPC8240 (Kahlua) EPIC
-driver routines. The driver routines are not
-written for any specific operating system.
-They serves the purpose of code sample, and
-jump-start for using the MPC8240 EPIC unit.
-
-For the reason of correctness of C language
-syntax, these files are compiled by Metaware
-C compiler and assembler.
-
-ENDIAN NOTATION:
-
-The algorithm is designed for big-endian mode,
-software is responsible for byte swapping.
-
-USAGE:
-
-1. The host system that is running on MPC8240
- shall link the files listed here. The memory
- location of driver routines shall take into
- account of that driver routines need to run
- in supervisor mode and they process external
- interrupts.
-
- The routine epic_exception shall be called by
- exception vector at location 0x500, i.e.,
- 603e core external exception vector.
-
-2. The host system is responsible for configuring
- the MPC8240 including Embedded Utilities Memory
- Block. All EPIC driver functions require the
- content of Embedded Utilities Memory Block
- Base Address Register, EUMBBAR, as the first
- parameter.
-
-3. Before EPIC unit of MPC8240 can be used,
- initialize EPIC unit by calling epicInit
- with the corresponding parameters.
-
- The initialization shall disable the 603e
- core External Exception by calling CoreExtIntDisable( ).
- Next, call epicInit( ). Last, enable the 603e core
- External Exception by calling CoreExtIntEnable( ).
-
-4. After EPIC unit has been successfully initialized,
- epicIntSourceSet( ) shall be used to register each
- external interrupt source. Anytime, an external
- interrupt source can be disabled or enabled by
- calling corresponding function, epicIntDisable( ),
- or epicIntEnable( ).
-
- Global Timers' resource, base count and frequency,
- can be changed by calling epicTmFrequencySet( )
- and epicTmBaseSet( ).
-
- To stop counting a specific global timer, use
- the function, epicTmInhibit while epicTmEnable
- can be used to start counting a timer.
-
-5. To mask a set of external interrupts that are
- are certain level below, epicIntPrioritySet( )
- can be used. For example, if the processor's
- current task priority register is set to 0x7,
- only interrupts of priority 0x8 or higher will
- be passed to the processor.
-
- Be careful when using this function. It may
- corrupt the current interrupt pending, selector,
- and request registers, resulting an invalid vetor.
-
- After enabling an interrupt, disable it may also
- cause an invalid vector. User may consider using
- the spurious vector interrupt service routine to
- handle this case.
-
-6. The EPIC driver routines contains a set
- of utilities, Set and Get, for host system
- to query and modify the desired EPIC source
- registers.
-
-7. Each external interrupt source shall register
- its interrupt service routine. The routine
- shall contain all interrupt source specific
- processes and keep as short as possible.
-
- Special customized end of interrupt routine
- is optional. If it is needed, it shall contain
- the external interrupt source specific end of
- interrupt process.
-
- External interrupt exception vector at 0x500
- shall always call the epicEOI just before
- rfi instruction. Refer to the routine,
- epic_exception, for a code sample.
diff --git a/arch/powerpc/cpu/mpc824x/drivers/epic/epic.h b/arch/powerpc/cpu/mpc824x/drivers/epic/epic.h
deleted file mode 100644
index 58f81c5..0000000
--- a/arch/powerpc/cpu/mpc824x/drivers/epic/epic.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/*********************************************************************
- * mpc8240epic.h - EPIC module of the MPC8240 micro-controller
- *
- * Copyrigh 1999 Motorola Inc.
- *
- * Modification History:
- * =====================
- * 01a,04Feb99,My Created.
- * 15Nov200, robt -modified to use in U-Boot
- *
-*/
-
-#ifndef __INCEPICh
-#define __INCEPICh
-
-#define ULONG unsigned long
-#define MAXVEC 20
-#define MAXIRQ 5 /* IRQs */
-#define EPIC_DIRECT_IRQ 0 /* Direct interrupt type */
-
-/* EPIC register addresses */
-
-#define EPIC_EUMBBAR 0x40000 /* EUMBBAR of EPIC */
-#define EPIC_FEATURES_REG (EPIC_EUMBBAR + 0x01000)/* Feature reporting */
-#define EPIC_GLOBAL_REG (EPIC_EUMBBAR + 0x01020)/* Global config. */
-#define EPIC_INT_CONF_REG (EPIC_EUMBBAR + 0x01030)/* Interrupt config. */
-#define EPIC_VENDOR_ID_REG (EPIC_EUMBBAR + 0x01080)/* Vendor id */
-#define EPIC_PROC_INIT_REG (EPIC_EUMBBAR + 0x01090)/* Processor init. */
-#define EPIC_SPUR_VEC_REG (EPIC_EUMBBAR + 0x010e0)/* Spurious vector */
-#define EPIC_TM_FREQ_REG (EPIC_EUMBBAR + 0x010f0)/* Timer Frequency */
-
-#define EPIC_TM0_CUR_COUNT_REG (EPIC_EUMBBAR + 0x01100)/* Gbl TM0 Cur. Count*/
-#define EPIC_TM0_BASE_COUNT_REG (EPIC_EUMBBAR + 0x01110)/* Gbl TM0 Base Count*/
-#define EPIC_TM0_VEC_REG (EPIC_EUMBBAR + 0x01120)/* Gbl TM0 Vector Pri*/
-#define EPIC_TM0_DES_REG (EPIC_EUMBBAR + 0x01130)/* Gbl TM0 Dest. */
-
-#define EPIC_TM1_CUR_COUNT_REG (EPIC_EUMBBAR + 0x01140)/* Gbl TM1 Cur. Count*/
-#define EPIC_TM1_BASE_COUNT_REG (EPIC_EUMBBAR + 0x01150)/* Gbl TM1 Base Count*/
-#define EPIC_TM1_VEC_REG (EPIC_EUMBBAR + 0x01160)/* Gbl TM1 Vector Pri*/
-#define EPIC_TM1_DES_REG (EPIC_EUMBBAR + 0x01170)/* Gbl TM1 Dest. */
-
-#define EPIC_TM2_CUR_COUNT_REG (EPIC_EUMBBAR + 0x01180)/* Gbl TM2 Cur. Count*/
-#define EPIC_TM2_BASE_COUNT_REG (EPIC_EUMBBAR + 0x01190)/* Gbl TM2 Base Count*/
-#define EPIC_TM2_VEC_REG (EPIC_EUMBBAR + 0x011a0)/* Gbl TM2 Vector Pri*/
-#define EPIC_TM2_DES_REG (EPIC_EUMBBAR + 0x011b0)/* Gbl TM2 Dest */
-
-#define EPIC_TM3_CUR_COUNT_REG (EPIC_EUMBBAR + 0x011c0)/* Gbl TM3 Cur. Count*/
-#define EPIC_TM3_BASE_COUNT_REG (EPIC_EUMBBAR + 0x011d0)/* Gbl TM3 Base Count*/
-#define EPIC_TM3_VEC_REG (EPIC_EUMBBAR + 0x011e0)/* Gbl TM3 Vector Pri*/
-#define EPIC_TM3_DES_REG (EPIC_EUMBBAR + 0x011f0)/* Gbl TM3 Dest. */
-
-#define EPIC_EX_INT0_VEC_REG (EPIC_EUMBBAR + 0x10200)/* Ext. Int. Sr0 Des */
-#define EPIC_EX_INT0_DES_REG (EPIC_EUMBBAR + 0x10210)/* Ext. Int. Sr0 Vect*/
-#define EPIC_EX_INT1_VEC_REG (EPIC_EUMBBAR + 0x10220)/* Ext. Int. Sr1 Des */
-#define EPIC_EX_INT1_DES_REG (EPIC_EUMBBAR + 0x10230)/* Ext. Int. Sr1 Vect*/
-#define EPIC_EX_INT2_VEC_REG (EPIC_EUMBBAR + 0x10240)/* Ext. Int. Sr2 Des */
-#define EPIC_EX_INT2_DES_REG (EPIC_EUMBBAR + 0x10250)/* Ext. Int. Sr2 Vect*/
-#define EPIC_EX_INT3_VEC_REG (EPIC_EUMBBAR + 0x10260)/* Ext. Int. Sr3 Des */
-#define EPIC_EX_INT3_DES_REG (EPIC_EUMBBAR + 0x10270)/* Ext. Int. Sr3 Vect*/
-#define EPIC_EX_INT4_VEC_REG (EPIC_EUMBBAR + 0x10280)/* Ext. Int. Sr4 Des */
-#define EPIC_EX_INT4_DES_REG (EPIC_EUMBBAR + 0x10290)/* Ext. Int. Sr4 Vect*/
-
-#define EPIC_SR_INT0_VEC_REG (EPIC_EUMBBAR + 0x10200)/* Sr. Int. Sr0 Des */
-#define EPIC_SR_INT0_DES_REG (EPIC_EUMBBAR + 0x10210)/* Sr. Int. Sr0 Vect */
-#define EPIC_SR_INT1_VEC_REG (EPIC_EUMBBAR + 0x10220)/* Sr. Int. Sr1 Des */
-#define EPIC_SR_INT1_DES_REG (EPIC_EUMBBAR + 0x10230)/* Sr. Int. Sr1 Vect.*/
-#define EPIC_SR_INT2_VEC_REG (EPIC_EUMBBAR + 0x10240)/* Sr. Int. Sr2 Des */
-#define EPIC_SR_INT2_DES_REG (EPIC_EUMBBAR + 0x10250)/* Sr. Int. Sr2 Vect.*/
-#define EPIC_SR_INT3_VEC_REG (EPIC_EUMBBAR + 0x10260)/* Sr. Int. Sr3 Des */
-#define EPIC_SR_INT3_DES_REG (EPIC_EUMBBAR + 0x10270)/* Sr. Int. Sr3 Vect.*/
-#define EPIC_SR_INT4_VEC_REG (EPIC_EUMBBAR + 0x10280)/* Sr. Int. Sr4 Des */
-#define EPIC_SR_INT4_DES_REG (EPIC_EUMBBAR + 0x10290)/* Sr. Int. Sr4 Vect.*/
-
-#define EPIC_SR_INT5_VEC_REG (EPIC_EUMBBAR + 0x102a0)/* Sr. Int. Sr5 Des */
-#define EPIC_SR_INT5_DES_REG (EPIC_EUMBBAR + 0x102b0)/* Sr. Int. Sr5 Vect.*/
-#define EPIC_SR_INT6_VEC_REG (EPIC_EUMBBAR + 0x102c0)/* Sr. Int. Sr6 Des */
-#define EPIC_SR_INT6_DES_REG (EPIC_EUMBBAR + 0x102d0)/* Sr. Int. Sr6 Vect.*/
-#define EPIC_SR_INT7_VEC_REG (EPIC_EUMBBAR + 0x102e0)/* Sr. Int. Sr7 Des */
-#define EPIC_SR_INT7_DES_REG (EPIC_EUMBBAR + 0x102f0)/* Sr. Int. Sr7 Vect.*/
-#define EPIC_SR_INT8_VEC_REG (EPIC_EUMBBAR + 0x10300)/* Sr. Int. Sr8 Des */
-#define EPIC_SR_INT8_DES_REG (EPIC_EUMBBAR + 0x10310)/* Sr. Int. Sr8 Vect.*/
-#define EPIC_SR_INT9_VEC_REG (EPIC_EUMBBAR + 0x10320)/* Sr. Int. Sr9 Des */
-#define EPIC_SR_INT9_DES_REG (EPIC_EUMBBAR + 0x10330)/* Sr. Int. Sr9 Vect.*/
-
-#define EPIC_SR_INT10_VEC_REG (EPIC_EUMBBAR + 0x10340)/* Sr. Int. Sr10 Des */
-#define EPIC_SR_INT10_DES_REG (EPIC_EUMBBAR + 0x10350)/* Sr. Int. Sr10 Vect*/
-#define EPIC_SR_INT11_VEC_REG (EPIC_EUMBBAR + 0x10360)/* Sr. Int. Sr11 Des */
-#define EPIC_SR_INT11_DES_REG (EPIC_EUMBBAR + 0x10370)/* Sr. Int. Sr11 Vect*/
-#define EPIC_SR_INT12_VEC_REG (EPIC_EUMBBAR + 0x10380)/* Sr. Int. Sr12 Des */
-#define EPIC_SR_INT12_DES_REG (EPIC_EUMBBAR + 0x10390)/* Sr. Int. Sr12 Vect*/
-#define EPIC_SR_INT13_VEC_REG (EPIC_EUMBBAR + 0x103a0)/* Sr. Int. Sr13 Des */
-#define EPIC_SR_INT13_DES_REG (EPIC_EUMBBAR + 0x103b0)/* Sr. Int. Sr13 Vect*/
-#define EPIC_SR_INT14_VEC_REG (EPIC_EUMBBAR + 0x103c0)/* Sr. Int. Sr14 Des */
-#define EPIC_SR_INT14_DES_REG (EPIC_EUMBBAR + 0x103d0)/* Sr. Int. Sr14 Vect*/
-#define EPIC_SR_INT15_VEC_REG (EPIC_EUMBBAR + 0x103e0)/* Sr. Int. Sr15 Des */
-#define EPIC_SR_INT15_DES_REG (EPIC_EUMBBAR + 0x103f0)/* Sr. Int. Sr15 Vect*/
-
-#define EPIC_I2C_INT_VEC_REG (EPIC_EUMBBAR + 0x11020)/* I2C Int. Vect Pri.*/
-#define EPIC_I2C_INT_DES_REG (EPIC_EUMBBAR + 0x11030)/* I2C Int. Dest */
-#define EPIC_DMA0_INT_VEC_REG (EPIC_EUMBBAR + 0x11040)/* DMA0 Int. Vect Pri*/
-#define EPIC_DMA0_INT_DES_REG (EPIC_EUMBBAR + 0x11050)/* DMA0 Int. Dest */
-#define EPIC_DMA1_INT_VEC_REG (EPIC_EUMBBAR + 0x11060)/* DMA1 Int. Vect Pri*/
-#define EPIC_DMA1_INT_DES_REG (EPIC_EUMBBAR + 0x11070)/* DMA1 Int. Dest */
-#define EPIC_MSG_INT_VEC_REG (EPIC_EUMBBAR + 0x110c0)/* Msg Int. Vect Pri*/
-#define EPIC_MSG_INT_DES_REG (EPIC_EUMBBAR + 0x110d0)/* Msg Int. Dest */
-
-#define EPIC_PROC_CTASK_PRI_REG (EPIC_EUMBBAR + 0x20080)/* Proc. current task*/
-#define EPIC_PROC_INT_ACK_REG (EPIC_EUMBBAR + 0x200a0)/* Int. acknowledge */
-#define EPIC_PROC_EOI_REG (EPIC_EUMBBAR + 0x200b0)/* End of interrupt */
-
-#define EPIC_VEC_PRI_MASK 0x80000000 /* Mask Interrupt bit in IVPR */
-#define EPIC_VEC_PRI_DFLT_PRI 8 /* Interrupt Priority in IVPR */
-
-/* Error code */
-
-#define OK 0
-#define ERROR -1
-
-/* function prototypes */
-
-void epicVendorId( unsigned int *step,
- unsigned int *devId,
- unsigned int *venId
- );
-void epicFeatures( unsigned int *noIRQs,
- unsigned int *noCPUs,
- unsigned int *VerId );
-extern void epicInit( unsigned int IRQType, unsigned int clkRatio);
-ULONG sysEUMBBARRead ( ULONG regNum );
-void sysEUMBBARWrite ( ULONG regNum, ULONG regVal);
-extern void epicTmFrequencySet( unsigned int frq );
-extern unsigned int epicTmFrequencyGet(void);
-extern unsigned int epicTmBaseSet( ULONG srcAddr,
- unsigned int cnt,
- unsigned int inhibit );
-extern unsigned int epicTmBaseGet ( ULONG srcAddr, unsigned int *val );
-extern unsigned int epicTmCountGet( ULONG srcAddr, unsigned int *val );
-extern unsigned int epicTmInhibit( unsigned int timer );
-extern unsigned int epicTmEnable( ULONG srcAdr );
-extern void CoreExtIntEnable(void); /* Enable 603e external interrupts */
-extern void CoreExtIntDisable(void); /* Disable 603e external interrupts */
-extern unsigned char epicIntTaskGet(void);
-extern void epicIntTaskSet( unsigned char val );
-extern unsigned int epicIntAck(void);
-extern void epicSprSet( unsigned int eumbbar, unsigned char );
-extern void epicConfigGet( unsigned int *clkRatio,
- unsigned int *serEnable );
-extern void SrcVecTableInit(void);
-extern unsigned int epicModeGet(void);
-extern void epicIntEnable(int Vect);
-extern void epicIntDisable(int Vect);
-extern int epicIntSourceConfig(int Vect, int Polarity, int Sense, int Prio);
-extern unsigned int epicIntAck(void);
-extern void epicEOI(void);
-extern int epicCurTaskPrioSet(int Vect);
-
-struct SrcVecTable
- {
- ULONG srcAddr;
- char srcName[40];
- };
-
-#endif /* EPIC_H */
diff --git a/arch/powerpc/cpu/mpc824x/drivers/epic/epic1.c b/arch/powerpc/cpu/mpc824x/drivers/epic/epic1.c
deleted file mode 100644
index ecbb42d..0000000
--- a/arch/powerpc/cpu/mpc824x/drivers/epic/epic1.c
+++ /dev/null
@@ -1,517 +0,0 @@
-/**************************************************
- *
- * copyright @ motorola, 1999
- *
- *************************************************/
-#include <mpc824x.h>
-#include <common.h>
-#include "epic.h"
-
-
-#define PRINT(format, args...) printf(format , ## args)
-
-typedef void (*VOIDFUNCPTR) (void); /* ptr to function returning void */
-struct SrcVecTable SrcVecTable[MAXVEC] = /* Addr/Vector cross-reference tbl */
- {
- { EPIC_EX_INT0_VEC_REG, "External Direct/Serial Source 0"},
- { EPIC_EX_INT1_VEC_REG, "External Direct/Serial Source 1"},
- { EPIC_EX_INT2_VEC_REG, "External Direct/Serial Source 2"},
- { EPIC_EX_INT3_VEC_REG, "External Direct/Serial Source 3"},
- { EPIC_EX_INT4_VEC_REG, "External Direct/Serial Source 4"},
-
- { EPIC_SR_INT5_VEC_REG, "External Serial Source 5"},
- { EPIC_SR_INT6_VEC_REG, "External Serial Source 6"},
- { EPIC_SR_INT7_VEC_REG, "External Serial Source 7"},
- { EPIC_SR_INT8_VEC_REG, "External Serial Source 8"},
- { EPIC_SR_INT9_VEC_REG, "External Serial Source 9"},
- { EPIC_SR_INT10_VEC_REG, "External Serial Source 10"},
- { EPIC_SR_INT11_VEC_REG, "External Serial Source 11"},
- { EPIC_SR_INT12_VEC_REG, "External Serial Source 12"},
- { EPIC_SR_INT13_VEC_REG, "External Serial Source 13"},
- { EPIC_SR_INT14_VEC_REG, "External Serial Source 14"},
- { EPIC_SR_INT15_VEC_REG, "External Serial Source 15"},
-
- { EPIC_I2C_INT_VEC_REG, "Internal I2C Source"},
- { EPIC_DMA0_INT_VEC_REG, "Internal DMA0 Source"},
- { EPIC_DMA1_INT_VEC_REG, "Internal DMA1 Source"},
- { EPIC_MSG_INT_VEC_REG, "Internal Message Source"},
- };
-
-VOIDFUNCPTR intVecTbl[MAXVEC]; /* Interrupt vector table */
-
-
-/****************************************************************************
-* epicInit - Initialize the EPIC registers
-*
-* This routine resets the Global Configuration Register, thus it:
-* - Disables all interrupts
-* - Sets epic registers to reset values
-* - Sets the value of the Processor Current Task Priority to the
-* highest priority (0xF).
-* epicInit then sets the EPIC operation mode to Mixed Mode (vs. Pass
-* Through or 8259 compatible mode).
-*
-* If IRQType (input) is Direct IRQs:
-* - IRQType is written to the SIE bit of the EPIC Interrupt
-* Configuration register (ICR).
-* - clkRatio is ignored.
-* If IRQType is Serial IRQs:
-* - both IRQType and clkRatio will be written to the ICR register
-*/
-
-void epicInit
- (
- unsigned int IRQType, /* Direct or Serial */
- unsigned int clkRatio /* Clk Ratio for Serial IRQs */
- )
- {
- ULONG tmp;
-
- tmp = sysEUMBBARRead(EPIC_GLOBAL_REG);
- tmp |= 0xa0000000; /* Set the Global Conf. register */
- sysEUMBBARWrite(EPIC_GLOBAL_REG, tmp);
- /*
- * Wait for EPIC to reset - CLH
- */
- while( (sysEUMBBARRead(EPIC_GLOBAL_REG) & 0x80000000) == 1);
- sysEUMBBARWrite(EPIC_GLOBAL_REG, 0x20000000);
- tmp = sysEUMBBARRead(EPIC_INT_CONF_REG); /* Read interrupt conf. reg */
-
- if (IRQType == EPIC_DIRECT_IRQ) /* direct mode */
- sysEUMBBARWrite(EPIC_INT_CONF_REG, tmp & 0xf7ffffff);
- else /* Serial mode */
- {
- tmp = (clkRatio << 28) | 0x08000000; /* Set clock ratio */
- sysEUMBBARWrite(EPIC_INT_CONF_REG, tmp);
- }
-
- while (epicIntAck() != 0xff) /* Clear all pending interrupts */
- epicEOI();
-}
-
-/****************************************************************************
- * epicIntEnable - Enable an interrupt source
- *
- * This routine clears the mask bit of an external, an internal or
- * a Timer register to enable the interrupt.
- *
- * RETURNS: None
- */
-void epicIntEnable(int intVec)
-{
- ULONG tmp;
- ULONG srAddr;
-
- srAddr = SrcVecTable[intVec].srcAddr; /* Retrieve src Vec/Prio register */
- tmp = sysEUMBBARRead(srAddr);
- tmp &= ~EPIC_VEC_PRI_MASK; /* Clear the mask bit */
- tmp |= (EPIC_VEC_PRI_DFLT_PRI << 16); /* Set priority to Default - CLH */
- tmp |= intVec; /* Set Vector number */
- sysEUMBBARWrite(srAddr, tmp);
-
- return;
- }
-
-/****************************************************************************
- * epicIntDisable - Disable an interrupt source
- *
- * This routine sets the mask bit of an external, an internal or
- * a Timer register to disable the interrupt.
- *
- * RETURNS: OK or ERROR
- *
- */
-
-void epicIntDisable
- (
- int intVec /* Interrupt vector number */
- )
- {
-
- ULONG tmp, srAddr;
-
- srAddr = SrcVecTable[intVec].srcAddr;
- tmp = sysEUMBBARRead(srAddr);
- tmp |= 0x80000000; /* Set the mask bit */
- sysEUMBBARWrite(srAddr, tmp);
- return;
- }
-
-/****************************************************************************
- * epicIntSourceConfig - Set properties of an interrupt source
- *
- * This function sets interrupt properites (Polarity, Sense, Interrupt
- * Prority, and Interrupt Vector) of an Interrupt Source. The properties
- * can be set when the current source is not in-request or in-service,
- * which is determined by the Activity bit. This routine return ERROR
- * if the the Activity bit is 1 (in-request or in-service).
- *
- * This function assumes that the Source Vector/Priority register (input)
- * is a valid address.
- *
- * RETURNS: OK or ERROR
- */
-
-int epicIntSourceConfig
- (
- int Vect, /* interrupt source vector number */
- int Polarity, /* interrupt source polarity */
- int Sense, /* interrupt source Sense */
- int Prio /* interrupt source priority */
- )
-
- {
- ULONG tmp, newVal;
- ULONG actBit, srAddr;
-
- srAddr = SrcVecTable[Vect].srcAddr;
- tmp = sysEUMBBARRead(srAddr);
- actBit = (tmp & 40000000) >> 30; /* retrieve activity bit - bit 30 */
- if (actBit == 1)
- return ERROR;
-
- tmp &= 0xff30ff00; /* Erase previously set P,S,Prio,Vector bits */
- newVal = (Polarity << 23) | (Sense << 22) | (Prio << 16) | Vect;
- sysEUMBBARWrite(srAddr, tmp | newVal );
- return (OK);
- }
-
-/****************************************************************************
- * epicIntAck - acknowledge an interrupt
- *
- * This function reads the Interrupt acknowldge register and return
- * the vector number of the highest pending interrupt.
- *
- * RETURNS: Interrupt Vector number.
- */
-
-unsigned int epicIntAck(void)
-{
- return(sysEUMBBARRead( EPIC_PROC_INT_ACK_REG ));
-}
-
-/****************************************************************************
- * epicEOI - signal an end of interrupt
- *
- * This function writes 0x0 to the EOI register to signal end of interrupt.
- * It is usually called after an interrupt routine is served.
- *
- * RETURNS: None
- */
-
-void epicEOI(void)
- {
- sysEUMBBARWrite(EPIC_PROC_EOI_REG, 0x0);
- }
-
-/****************************************************************************
- * epicCurTaskPrioSet - sets the priority of the Processor Current Task
- *
- * This function should be called after epicInit() to lower the priority
- * of the processor current task.
- *
- * RETURNS: OK or ERROR
- */
-
-int epicCurTaskPrioSet
- (
- int prioNum /* New priority value */
- )
- {
-
- if ( (prioNum < 0) || (prioNum > 0xF))
- return ERROR;
- sysEUMBBARWrite(EPIC_PROC_CTASK_PRI_REG, prioNum);
- return OK;
- }
-
-
-/************************************************************************
- * function: epicIntTaskGet
- *
- * description: Get value of processor current interrupt task priority register
- *
- * note:
- ***********************************************************************/
-unsigned char epicIntTaskGet()
-{
- /* get the interrupt task priority register */
- ULONG reg;
- unsigned char rec;
-
- reg = sysEUMBBARRead( EPIC_PROC_CTASK_PRI_REG );
- rec = ( reg & 0x0F );
- return rec;
-}
-
-
-/**************************************************************
- * function: epicISR
- *
- * description: EPIC service routine called by the core exception
- * at 0x500
- *
- * note:
- **************************************************************/
-unsigned int epicISR(void)
-{
- return 0;
-}
-
-
-/************************************************************
- * function: epicModeGet
- *
- * description: query EPIC mode, return 0 if pass through mode
- * return 1 if mixed mode
- *
- * note:
- *************************************************************/
-unsigned int epicModeGet(void)
-{
- ULONG val;
-
- val = sysEUMBBARRead( EPIC_GLOBAL_REG );
- return (( val & 0x20000000 ) >> 29);
-}
-
-
-/*********************************************
- * function: epicConfigGet
- *
- * description: Get the EPIC interrupt Configuration
- * return 0 if not error, otherwise return 1
- *
- * note:
- ********************************************/
-void epicConfigGet( unsigned int *clkRatio, unsigned int *serEnable)
-{
- ULONG val;
-
- val = sysEUMBBARRead( EPIC_INT_CONF_REG );
- *clkRatio = ( val & 0x70000000 ) >> 28;
- *serEnable = ( val & 0x8000000 ) >> 27;
-}
-
-
-/*******************************************************************
- * sysEUMBBARRead - Read a 32-bit EUMBBAR register
- *
- * This routine reads the content of a register in the Embedded
- * Utilities Memory Block, and swaps to big endian before returning
- * the value.
- *
- * RETURNS: The content of the specified EUMBBAR register.
- */
-
-ULONG sysEUMBBARRead
- (
- ULONG regNum
- )
- {
- ULONG temp;
-
- temp = *(ULONG *) (CONFIG_SYS_EUMB_ADDR + regNum);
- return ( LONGSWAP(temp));
- }
-
-/*******************************************************************
- * sysEUMBBARWrite - Write a 32-bit EUMBBAR register
- *
- * This routine swaps the value to little endian then writes it to
- * a register in the Embedded Utilities Memory Block address space.
- *
- * RETURNS: N/A
- */
-
-void sysEUMBBARWrite
- (
- ULONG regNum, /* EUMBBAR register address */
- ULONG regVal /* Value to be written */
- )
- {
-
- *(ULONG *) (CONFIG_SYS_EUMB_ADDR + regNum) = LONGSWAP(regVal);
- return ;
- }
-
-
-/********************************************************
- * function: epicVendorId
- *
- * description: return the EPIC Vendor Identification
- * register:
- *
- * siliccon version, device id, and vendor id
- *
- * note:
- ********************************************************/
-void epicVendorId
- (
- unsigned int *step,
- unsigned int *devId,
- unsigned int *venId
- )
- {
- ULONG val;
- val = sysEUMBBARRead( EPIC_VENDOR_ID_REG );
- *step = ( val & 0x00FF0000 ) >> 16;
- *devId = ( val & 0x0000FF00 ) >> 8;
- *venId = ( val & 0x000000FF );
- }
-
-/**************************************************
- * function: epicFeatures
- *
- * description: return the number of IRQ supported,
- * number of CPU, and the version of the
- * OpenEPIC
- *
- * note:
- *************************************************/
-void epicFeatures
- (
- unsigned int *noIRQs,
- unsigned int *noCPUs,
- unsigned int *verId
- )
- {
- ULONG val;
-
- val = sysEUMBBARRead( EPIC_FEATURES_REG );
- *noIRQs = ( val & 0x07FF0000 ) >> 16;
- *noCPUs = ( val & 0x00001F00 ) >> 8;
- *verId = ( val & 0x000000FF );
-}
-
-
-/*********************************************************
- * function: epciTmFrequncySet
- *
- * description: Set the timer frequency reporting register
- ********************************************************/
-void epicTmFrequencySet( unsigned int frq )
-{
- sysEUMBBARWrite(EPIC_TM_FREQ_REG, frq);
-}
-
-/*******************************************************
- * function: epicTmFrequncyGet
- *
- * description: Get the current value of the Timer Frequency
- * Reporting register
- *
- ******************************************************/
-unsigned int epicTmFrequencyGet(void)
-{
- return( sysEUMBBARRead(EPIC_TM_FREQ_REG)) ;
-}
-
-
-/****************************************************
- * function: epicTmBaseSet
- *
- * description: Set the #n global timer base count register
- * return 0 if no error, otherwise return 1.
- *
- * note:
- ****************************************************/
-unsigned int epicTmBaseSet
- (
- ULONG srcAddr, /* Address of the Timer Base register */
- unsigned int cnt, /* Base count */
- unsigned int inhibit /* 1 - count inhibit */
- )
-{
-
- unsigned int val = 0x80000000;
- /* First inhibit counting the timer */
- sysEUMBBARWrite(srcAddr, val) ;
-
- /* set the new value */
- val = (cnt & 0x7fffffff) | ((inhibit & 0x1) << 31);
- sysEUMBBARWrite(srcAddr, val) ;
- return 0;
-}
-
-/***********************************************************************
- * function: epicTmBaseGet
- *
- * description: Get the current value of the global timer base count register
- * return 0 if no error, otherwise return 1.
- *
- * note:
- ***********************************************************************/
-unsigned int epicTmBaseGet( ULONG srcAddr, unsigned int *val )
-{
- *val = sysEUMBBARRead( srcAddr );
- *val = *val & 0x7fffffff;
- return 0;
-}
-
-/***********************************************************
- * function: epicTmCountGet
- *
- * description: Get the value of a given global timer
- * current count register
- * return 0 if no error, otherwise return 1
- * note:
- **********************************************************/
-unsigned int epicTmCountGet( ULONG srcAddr, unsigned int *val )
-{
- *val = sysEUMBBARRead( srcAddr );
- *val = *val & 0x7fffffff;
- return 0;
-}
-
-
-/***********************************************************
- * function: epicTmInhibit
- *
- * description: Stop counting of a given global timer
- * return 0 if no error, otherwise return 1
- *
- * note:
- ***********************************************************/
-unsigned int epicTmInhibit( unsigned int srcAddr )
-{
- ULONG val;
-
- val = sysEUMBBARRead( srcAddr );
- val |= 0x80000000;
- sysEUMBBARWrite( srcAddr, val );
- return 0;
-}
-
-/******************************************************************
- * function: epicTmEnable
- *
- * description: Enable counting of a given global timer
- * return 0 if no error, otherwise return 1
- *
- * note:
- *****************************************************************/
-unsigned int epicTmEnable( ULONG srcAddr )
-{
- ULONG val;
-
- val = sysEUMBBARRead( srcAddr );
- val &= 0x7fffffff;
- sysEUMBBARWrite( srcAddr, val );
- return 0;
-}
-
-void epicSourcePrint(int Vect)
- {
- ULONG srcVal;
-
- srcVal = sysEUMBBARRead(SrcVecTable[Vect].srcAddr);
- PRINT("%s\n", SrcVecTable[Vect].srcName);
- PRINT("Address = 0x%lx\n", SrcVecTable[Vect].srcAddr);
- PRINT("Vector = %ld\n", (srcVal & 0x000000FF) );
- PRINT("Mask = %ld\n", srcVal >> 31);
- PRINT("Activitiy = %ld\n", (srcVal & 40000000) >> 30);
- PRINT("Polarity = %ld\n", (srcVal & 0x00800000) >> 23);
- PRINT("Sense = %ld\n", (srcVal & 0x00400000) >> 22);
- PRINT("Priority = %ld\n", (srcVal & 0x000F0000) >> 16);
- }
diff --git a/arch/powerpc/cpu/mpc824x/drivers/epic/epic2.S b/arch/powerpc/cpu/mpc824x/drivers/epic/epic2.S
deleted file mode 100644
index 52d19aa..0000000
--- a/arch/powerpc/cpu/mpc824x/drivers/epic/epic2.S
+++ /dev/null
@@ -1,196 +0,0 @@
-/**************************************
- *
- * copyright @ Motorola, 1999
- *
- **************************************/
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/processor.h>
-
-/*********************************************
- * function: CoreExtIntEnable
- *
- * description: Enable 603e core external interrupt
- *
- * note: mtmsr is context-synchronization
- **********************************************/
- .text
- .align 2
- .global CoreExtIntEnable
-CoreExtIntEnable:
- mfmsr r3
-
- ori r3,r3,0x8000 /* enable external interrupt */
- mtmsr r3
-
- bclr 20, 0
-
-/*******************************************
- * function: CoreExtIntDisable
- *
- * description: Disable 603e core external interrupt
- *
- * note:
- *******************************************/
- .text
- .align 2
- .global CoreExtIntDisable
-CoreExtIntDisable:
- mfmsr r4
-
- xor r3,r3,r3
- or r3,r3,r4
-
- andis. r4,r4,0xffff
- andi. r3,r3,0x7fff /* disable external interrupt */
-
- or r3,r3,r4
- mtmsr r3
-
- bclr 20, 0
-
-/*********************************************************
- * function: epicEOI
- *
- * description: signal the EOI and restore machine status
- * Input: r3 - value of eumbbar
- * Output: r3 - value of eumbbar
- * r4 - ISR vector value
- * note:
- ********************************************************/
- .text
- .align 2
- .global epicEOI
-epicEOI:
- lis r5,0x0006 /* Build End Of Interrupt Register offset */
- ori r5,r5,0x00b0
- xor r7,r7,r7 /* Clear r7 */
- stwbrx r7,r5,r3 /* Save r7, writing to this register will
- * intidate the end of processing the
- * highest interrupt.
- */
- sync
-
- /* ---RESTORE MACHINE STATE */
- mfmsr r13 /* Clear Recoverable Interrupt bit in MSR */
- or r7,r7,r13
-
- andis. r7,r7,0xffff
- andi. r13,r13,0x7ffd /* (and disable interrupts) */
- or r13,r13,r7
- mtmsr r13
-
- lwz r13,0x1c(r1) /* pull ctr */
- mtctr r13
-
- lwz r13,0x18(r1) /* pull xer */
- mtctr r13
-
- lwz r13,0x14(r1) /* pull lr */
- mtctr r13
-
- lwz r13,0x10(r1) /* Pull SRR1 from stack */
- mtspr SRR1,r13 /* Restore SRR1 */
-
- lwz r13,0xc(r1) /* Pull SRR0 from stack */
- mtspr SRR0,r13 /* Restore SRR0 */
-
- lwz r13,0x8(r1) /* Pull User stack pointer from stack */
- mtspr SPRG1,r13 /* Restore SPRG1 */
-
- lwz r4,0x4(r1) /* vector value */
- lwz r3,0x0(r1) /* eumbbar */
- sync
-
- addi r1,r1,0x20 /* Deallocate stack */
- mtspr SPRG0,r1 /* Save updated Supervisor stack pointer */
- mfspr r1,SPRG1 /* Restore User stack pointer */
-
- bclr 20,0
-
-/***********************************************************
- * function: exception routine called by exception vector
- * at 0x500, external interrupt
- *
- * description: Kahlua EPIC controller
- *
- * input: r3 - content of eumbbar
- * output: r3 - ISR return value
- * r4 - Interrupt vector number
- * note:
- ***********************************************************/
-
- .text
- .align 2
- .global epic_exception
-
-epic_exception:
-
- /*---SAVE MACHINE STATE TO A STACK */
- mtspr SPRG1,r1 /* Save User stack pointer to SPRG1 */
- mfspr r1,SPRG0 /* Load Supervisor stack pointer into r1 */
-
- stwu r3,-0x20(r1) /* Push the value of eumbbar onto stack */
-
- mfspr r3,SPRG1 /* Push User stack pointer onto stack */
- stw r3,0x8(r1)
- mfspr r3,SRR0 /* Push SRR0 onto stack */
- stw r1,0xc(r1)
- mfspr r3,SRR1 /* Push SRR1 onto stack */
- stw r3,0x10(r1)
- mflr r3
- stw r3,0x14(r1) /* Push LR */
- mfxer r3
- stw r3,0x18(r1) /* Push Xer */
- mfctr r3
- stw r3,0x1c(r1) /* Push CTR */
-
- mtspr SPRG0,r1 /* Save updated Supervisor stack pointer
- * value to SPRG0
- */
- mfmsr r3
- ori r3,r3,0x0002 /* Set Recoverable Interrupt bit in MSR */
- mtmsr r3
-
- /* ---READ IN THE EUMBAR REGISTER */
- lwz r6,0(r1) /* this is eumbbar */
- sync
-
- /* ---READ EPIC REGISTER: PROCESSOR INTERRUPT ACKNOWLEDGE REGISTER */
- lis r5,0x0006 /* Build Interrupt Acknowledge Register
- * offset
- */
- ori r5,r5,0x00a0
- lwbrx r7,r5,r6 /* Load interrupt vector into r7 */
- sync
-
- /* --MASK OFF ALL BITS EXCEPT THE VECTOR */
- xor r3,r3,r3
- xor r4,r4,r4
- or r3, r3, r6 /* eumbbar in r3 */
- andi. r4,r7,0x00ff /* Mask off bits, vector in r4 */
-
- stw r4,0x04(r1) /* save the vector value */
-
- lis r5,epicISR@ha
- ori r5,r5,epicISR@l
- mtlr r5
- blrl
-
- xor r30,r30,r30
- or r30,r30,r3 /* save the r3 which containts the return value from epicISR */
-
- /* ---READ IN THE EUMBAR REGISTER */
- lwz r3,0(r1)
- sync
-
- lis r5,epicEOI@ha
- ori r5,r5,epicEOI@l
- mtlr r5
- blrl
-
- xor r3,r3,r3
- or r3,r3,r30 /* restore the ISR return value */
-
- bclr 20,0
diff --git a/arch/powerpc/cpu/mpc824x/drivers/epic/epicutil.S b/arch/powerpc/cpu/mpc824x/drivers/epic/epicutil.S
deleted file mode 100644
index 4877050..0000000
--- a/arch/powerpc/cpu/mpc824x/drivers/epic/epicutil.S
+++ /dev/null
@@ -1,57 +0,0 @@
-/**************************************
- *
- * copyright @ Motorola, 1999
- *
- *
- * This file contains two commonly used
- * lower level utility routines.
- *
- * The utility routines are also in other
- * Kahlua device driver libraries. The
- * need to be linked in only once.
- **************************************/
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-/**********************************************************
- * function: load_runtime_reg
- *
- * input: r3 - value of eumbbar
- * r4 - register offset in embedded utility space
- *
- * output: r3 - register content
- **********************************************************/
- .text
- .align 2
- .global load_runtime_reg
-
-load_runtime_reg:
-
- xor r5,r5,r5
- or r5,r5,r3 /* save eumbbar */
-
- lwbrx r3,r4,r5
- sync
-
- bclr 20, 0
-
-/****************************************************************
- * function: store_runtime_reg
- *
- * input: r3 - value of eumbbar
- * r4 - register offset in embedded utility space
- * r5 - new value to be stored
- *
- ****************************************************************/
- .text
- .align 2
- .global store_runtime_reg
-store_runtime_reg:
-
- xor r0,r0,r0
-
- stwbrx r5, r4, r3
- sync
-
- bclr 20,0
diff --git a/arch/powerpc/cpu/mpc824x/drivers/errors.h b/arch/powerpc/cpu/mpc824x/drivers/errors.h
deleted file mode 100644
index 20794a2..0000000
--- a/arch/powerpc/cpu/mpc824x/drivers/errors.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/* Copyright Motorola, Inc. 1993, 1994
- ALL RIGHTS RESERVED
-
- You are hereby granted a copyright license to use, modify, and
- distribute the SOFTWARE so long as this entire notice is retained
- without alteration in any modified and/or redistributed versions,
- and that such modified versions are clearly identified as such.
- No licenses are granted by implication, estoppel or otherwise under
- any patents or trademarks of Motorola, Inc.
-
- The SOFTWARE is provided on an "AS IS" basis and without warranty.
- To the maximum extent permitted by applicable law, MOTOROLA DISCLAIMS
- ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED
- WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
- PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH
- REGARD TO THE SOFTWARE (INCLUDING ANY MODIFIED VERSIONS
- THEREOF) AND ANY ACCOMPANYING WRITTEN MATERIALS.
-
- To the maximum extent permitted by applicable law, IN NO EVENT SHALL
- MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
- (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF
- BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
- INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OF THE USE OR
- INABILITY TO USE THE SOFTWARE. Motorola assumes no responsibility
- for the maintenance and support of the SOFTWARE.
-
-*/
-
-
-#include "config.h"
-
-/*
- 1 2 3 4 5 6 7 8
-01234567890123456789012345678901234567890123456789012345678901234567890123456789
-*/
-/* List define statements here */
-
-/* These are for all the toolboxes and functions to use. These will help
-to standardize the error handling in the current project */
-
- /* this is the "data type" for the error
- messages in the system */
-#define STATUS unsigned int
-
- /* this is a success status code */
-#define SUCCESS 1
-
- /* likewise this is failure */
-#define FAILURE 0
-
-#define NUM_ERRORS 47
-
-/* This first section of "defines" are for error codes ONLY. The called
- routine will return one of these error codes to the caller. If the final
- returned code is "VALID", then everything is a-okay. However, if one
- of the functions returns a non-valid status, that error code should be
- propogated back to all the callers. At the end, the last caller will
- call an error_processing function, and send in the status which was
- returned. It's up to the error_processing function to determine which
- error occured (as indicated by the status), and print an appropriate
- message back to the user.
-*/
-/*----------------------------------------------------------------------*/
-/* these are specifically for the parser routines */
-
-#define UNKNOWN_COMMAND 0xfb00 /* "unrecognized command " */
-#define UNKNOWN_REGISTER 0xfb01 /* "unknown register "*/
-#define ILLEGAL_RD_STAGE 0xfb02 /* cannot specify reg. family in range*/
-#define ILLEGAL_REG_FAMILY 0xfb03 /* "cannot specify a range of special
- or miscellaneous registers"*/
-#define RANGE_CROSS_FAMILY 0xfb04 /* "cannot specify a range across
- register families" */
-#define UNIMPLEMENTED_STAGE 0xfb05 /* invalid rd or rmm parameter format */
-#define REG_NOT_WRITEABLE 0xfb06 /* "unknown operator in arguements"*/
-#define INVALID_FILENAME 0xfb07 /* "invalid download filename" */
-#define INVALID_BAUD_RATE 0xfb08 /* invalid baud rate from sb command */
-#define UNSUPPORTED_REGISTER 0xfb09 /* Special register is not supported */
-#define FOR_BOARD_ONLY 0xfb0a /* "Not available for Unix." */
-
-
-/*----------------------------------------------------------------------*/
-/* these are for the error checking toolbox */
-
-#define INVALID 0xfd00 /* NOT valid */
-#define VALID 0xfd01 /* valid */
-
- /* This error is found in the fcn:
- is_right_size_input() to indicate
- that the input was not 8 characters
- long. */
-#define INVALID_SIZE 0xfd02
-
- /* This error is found in the fcn:
- is_valid_address_range() to indicate
- that the address given falls outside
- of valid memory defined by MEM_START
- to MEM_END.
- */
-#define OUT_OF_BOUNDS_ADDRESS 0xfd03
-
- /* This error is found in the fcn:
- is_valid_hex_input() to indicate that
- one of more of the characters entered
- are not valid hex characters. Valid
- hex characters are 0-9, A-F, a-f.
- */
-#define INVALID_HEX_INPUT 0xfd04
-
- /* This error is found in the fcn:
- is_valid_register_number() to indicate
- that a given register does not exist.
- */
-#define REG_NOT_READABLE 0xfd05
-
- /* This error is found in the fcn:
- is_word_aligned_address() to indicate
- that the given address is not word-
- aligned. A word-aligned address ends
- in 0x0,0x4,0x8,0xc.
- */
-#define NOT_WORD_ALIGNED 0xfd07
-
- /* This error is found in the fcn:
- is_valid_address_range() to indicate
- that the starting address is greater
- than the ending address.
- */
-#define REVERSED_ADDRESS 0xfd08
-
- /* this error tells us that the address
- specified as the destination is within
- the source addresses */
-#define RANGE_OVERLAP 0xfd09
-
-
-#define ERROR 0xfd0a /* An error occured */
-#define INVALID_PARAM 0xfd0b /* "invalid input parameter " */
-
-
-#define INVALID_FLAG 0xfd0c /* invalid flag */
-
-/*----------------------------------------------------------------------*/
-/* these are for the getarg toolbox */
-
-#define INVALID_NUMBER_ARGS 0xFE00 /* invalid number of commd arguements */
-#define UNKNOWN_PARAMETER 0xFE01 /* "unknown type of parameter "*/
-
-
-/*----------------------------------------------------------------------*/
-/* these are for the tokenizer toolbox */
-
-#define ILLEGAL_CHARACTER 0xFF00 /* unrecognized char. in input stream*/
-#define TTL_NOT_SORTED 0xFF01 /* token translation list not sorted */
-#define TTL_NOT_DEFINED 0xFF02 /* token translation list not assigned*/
-#define INVALID_STRING 0xFF03 /* unable to extract string from input */
-#define BUFFER_EMPTY 0xFF04 /* "input buffer is empty" */
-#define INVALID_MODE 0xFF05 /* input buf is in an unrecognized mode*/
-#define TOK_INTERNAL_ERROR 0xFF06 /* "internal tokenizer error" */
-#define TOO_MANY_IBS 0xFF07 /* "too many open input buffers" */
-#define NO_OPEN_IBS 0xFF08 /* "no open input buffers" */
-
-
-/* these are for the read from screen toolbox */
-
-#define RESERVED_WORD 0xFC00 /* used a reserved word as an arguement*/
-
-
-/* these are for the breakpoint routines */
-
-#define FULL_BPDS 0xFA00 /* breakpoint data structure is full */
-
-
-/* THESE are for the downloader */
-
-#define NOT_IN_S_RECORD_FORMAT 0xf900 /* "not in S-Record Format" */
-#define UNREC_RECORD_TYPE 0xf901 /* "unrecognized record type" */
-#define CONVERSION_ERROR 0xf902 /* "ascii to int conversion error" */
-#define INVALID_MEMORY 0xf903 /* "bad s-record memory address " */
-
-
-/* these are for the compression and decompression stuff */
-
-#define COMP_UNK_CHARACTER 0xf800 /* "unknown compressed character " */
-
-#define COMP_UNKNOWN_STATE 0xf801 /* "unknown binary state" */
-
-#define NOT_IN_COMPRESSED_FORMAT 0xf802 /* not in compressed S-Record format */
-
-
-/* these are for the DUART handling things */
-
- /* "unrecognized serial port configuration" */
-#define UNKNOWN_PORT_STATE 0xf700
-
-
-/* these are for the register toolbox */
-
- /* "cannot find register in special
- purpose register file " */
-#define SPR_NOT_FOUND 0xf600
-
-
-/* these are for the duart specific stuff */
-
- /* "transparent mode needs access to
- two serial ports" */
-#define TM_NEEDS_BOTH_PORTS 0xf500
-
-
-/*----------------------------------------------------------------------*/
-/* these are specifically for the flash routines */
-#define FLASH_ERROR 0xf100 /* general flash error */
diff --git a/arch/powerpc/cpu/mpc824x/drivers/i2c/i2c.c b/arch/powerpc/cpu/mpc824x/drivers/i2c/i2c.c
deleted file mode 100644
index 3638ab0..0000000
--- a/arch/powerpc/cpu/mpc824x/drivers/i2c/i2c.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * (C) Copyright 2003
- * Gleb Natapov <gnatapov@mrv.com>
- * Some bits are taken from linux driver writen by adrian@humboldt.co.uk
- *
- * Hardware I2C driver for MPC107 PCI bridge.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-
-#undef I2CDBG
-
-#ifdef CONFIG_HARD_I2C
-#include <i2c.h>
-
-#define TIMEOUT (CONFIG_SYS_HZ/4)
-
-#define I2C_Addr ((unsigned *)(CONFIG_SYS_EUMB_ADDR + 0x3000))
-
-#define I2CADR &I2C_Addr[0]
-#define I2CFDR &I2C_Addr[1]
-#define I2CCCR &I2C_Addr[2]
-#define I2CCSR &I2C_Addr[3]
-#define I2CCDR &I2C_Addr[4]
-
-#define MPC107_CCR_MEN 0x80
-#define MPC107_CCR_MIEN 0x40
-#define MPC107_CCR_MSTA 0x20
-#define MPC107_CCR_MTX 0x10
-#define MPC107_CCR_TXAK 0x08
-#define MPC107_CCR_RSTA 0x04
-
-#define MPC107_CSR_MCF 0x80
-#define MPC107_CSR_MAAS 0x40
-#define MPC107_CSR_MBB 0x20
-#define MPC107_CSR_MAL 0x10
-#define MPC107_CSR_SRW 0x04
-#define MPC107_CSR_MIF 0x02
-#define MPC107_CSR_RXAK 0x01
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-/* taken from linux include/asm-ppc/io.h */
-inline unsigned in_le32 (volatile unsigned *addr)
-{
- unsigned ret;
-
- __asm__ __volatile__ ("lwbrx %0,0,%1;\n"
- "twi 0,%0,0;\n"
- "isync":"=r" (ret): "r" (addr), "m" (*addr));
- return ret;
-}
-
-inline void out_le32 (volatile unsigned *addr, int val)
-{
- __asm__ __volatile__ ("stwbrx %1,0,%2; eieio":"=m" (*addr):"r" (val),
- "r" (addr));
-}
-
-#define writel(val, addr) out_le32(addr, val)
-#define readl(addr) in_le32(addr)
-
-void i2c_init (int speed, int slaveadd)
-{
- /* stop I2C controller */
- writel (0x0, I2CCCR);
- /* set clock */
- writel (0x1020, I2CFDR);
- /* write slave address */
- writel (slaveadd, I2CADR);
- /* clear status register */
- writel (0x0, I2CCSR);
- /* start I2C controller */
- writel (MPC107_CCR_MEN, I2CCCR);
-
- return;
-}
-
-static __inline__ int i2c_wait4bus (void)
-{
- ulong timeval = get_timer (0);
-
- while (readl (I2CCSR) & MPC107_CSR_MBB)
- if (get_timer (timeval) > TIMEOUT)
- return -1;
-
- return 0;
-}
-
-static __inline__ int i2c_wait (int write)
-{
- u32 csr;
- ulong timeval = get_timer (0);
-
- do {
- csr = readl (I2CCSR);
-
- if (!(csr & MPC107_CSR_MIF))
- continue;
-
- writel (0x0, I2CCSR);
-
- if (csr & MPC107_CSR_MAL) {
-#ifdef I2CDBG
- printf ("i2c_wait: MAL\n");
-#endif
- return -1;
- }
-
- if (!(csr & MPC107_CSR_MCF)) {
-#ifdef I2CDBG
- printf ("i2c_wait: unfinished\n");
-#endif
- return -1;
- }
-
- if (write == I2C_WRITE && (csr & MPC107_CSR_RXAK)) {
-#ifdef I2CDBG
- printf ("i2c_wait: No RXACK\n");
-#endif
- return -1;
- }
-
- return 0;
- } while (get_timer (timeval) < TIMEOUT);
-
-#ifdef I2CDBG
- printf ("i2c_wait: timed out\n");
-#endif
- return -1;
-}
-
-static __inline__ int i2c_write_addr (u8 dev, u8 dir, int rsta)
-{
- writel (MPC107_CCR_MEN | MPC107_CCR_MSTA | MPC107_CCR_MTX |
- (rsta ? MPC107_CCR_RSTA : 0), I2CCCR);
-
- writel ((dev << 1) | dir, I2CCDR);
-
- if (i2c_wait (I2C_WRITE) < 0)
- return 0;
-
- return 1;
-}
-
-static __inline__ int __i2c_write (u8 * data, int length)
-{
- int i;
-
- writel (MPC107_CCR_MEN | MPC107_CCR_MSTA | MPC107_CCR_MTX, I2CCCR);
-
- for (i = 0; i < length; i++) {
- writel (data[i], I2CCDR);
-
- if (i2c_wait (I2C_WRITE) < 0)
- break;
- }
-
- return i;
-}
-
-static __inline__ int __i2c_read (u8 * data, int length)
-{
- int i;
-
- writel (MPC107_CCR_MEN | MPC107_CCR_MSTA |
- ((length == 1) ? MPC107_CCR_TXAK : 0), I2CCCR);
-
- /* dummy read */
- readl (I2CCDR);
-
- for (i = 0; i < length; i++) {
- if (i2c_wait (I2C_READ) < 0)
- break;
-
- /* Generate ack on last next to last byte */
- if (i == length - 2)
- writel (MPC107_CCR_MEN | MPC107_CCR_MSTA |
- MPC107_CCR_TXAK, I2CCCR);
-
- /* Generate stop on last byte */
- if (i == length - 1)
- writel (MPC107_CCR_MEN | MPC107_CCR_TXAK, I2CCCR);
-
- data[i] = readl (I2CCDR);
- }
-
- return i;
-}
-
-int i2c_read (u8 dev, uint addr, int alen, u8 * data, int length)
-{
- int i = 0;
- u8 *a = (u8 *) & addr;
-
- if (i2c_wait4bus () < 0)
- goto exit;
-
- if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
- goto exit;
-
- if (__i2c_write (&a[4 - alen], alen) != alen)
- goto exit;
-
- if (i2c_write_addr (dev, I2C_READ, 1) == 0)
- goto exit;
-
- i = __i2c_read (data, length);
-
-exit:
- writel (MPC107_CCR_MEN, I2CCCR);
-
- return !(i == length);
-}
-
-int i2c_write (u8 dev, uint addr, int alen, u8 * data, int length)
-{
- int i = 0;
- u8 *a = (u8 *) & addr;
-
- if (i2c_wait4bus () < 0)
- goto exit;
-
- if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
- goto exit;
-
- if (__i2c_write (&a[4 - alen], alen) != alen)
- goto exit;
-
- i = __i2c_write (data, length);
-
-exit:
- writel (MPC107_CCR_MEN, I2CCCR);
-
- return !(i == length);
-}
-
-int i2c_probe (uchar chip)
-{
- int tmp;
-
- /*
- * Try to read the first location of the chip. The underlying
- * driver doesn't appear to support sending just the chip address
- * and looking for an <ACK> back.
- */
- udelay (10000);
- return i2c_read (chip, 0, 1, (uchar *) &tmp, 1);
-}
-
-#endif /* CONFIG_HARD_I2C */
diff --git a/arch/powerpc/cpu/mpc824x/interrupts.c b/arch/powerpc/cpu/mpc824x/interrupts.c
deleted file mode 100644
index fad103f..0000000
--- a/arch/powerpc/cpu/mpc824x/interrupts.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * Rob Taylor, Flying Pig Systems. robt@flyingpig.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-#include <asm/pci_io.h>
-#include <commproc.h>
-#include "drivers/epic.h"
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
- *decrementer_count = (get_bus_freq (0) / 4) / CONFIG_SYS_HZ;
-
- /*
- * It's all broken at the moment and I currently don't need
- * interrupts. If you want to fix it, have a look at the epic
- * drivers in dink32 v12. They do everthing and Motorola said
- * I could use the dink source in this project as long as
- * copyright notices remain intact.
- */
-
- epicInit (EPIC_DIRECT_IRQ, 0);
- /* EPIC won't generate INT unless Current Task Pri < 15 */
- epicCurTaskPrioSet(0);
-
- return (0);
-}
-
-/****************************************************************************/
-
-/*
- * Handle external interrupts
- */
-void external_interrupt (struct pt_regs *regs)
-{
- register unsigned long temp;
-
- pci_readl (CONFIG_SYS_EUMB_ADDR + EPIC_PROC_INT_ACK_REG, temp);
- sync (); /* i'm not convinced this is needed, but dink source has it */
- temp &= 0xff; /*get vector */
-
- /*TODO: handle them -... */
- epicEOI ();
-}
-
-/****************************************************************************/
-
-/*
- * blank int handlers.
- */
-
-void
-irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
-{
-}
-
-void irq_free_handler (int vec)
-{
-
-}
-
-/*TODO: some handlers for winbond and 87308 interrupts
- and what about generic pci inteerupts?
- vga?
- */
-
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
diff --git a/arch/powerpc/cpu/mpc824x/pci.c b/arch/powerpc/cpu/mpc824x/pci.c
deleted file mode 100644
index 1257b08..0000000
--- a/arch/powerpc/cpu/mpc824x/pci.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * arch/powerpc/kernel/mpc10x_common.c
- *
- * Common routines for the Motorola SPS MPC106, MPC107 and MPC8240 Host bridge,
- * Mem ctlr, EPIC, etc.
- *
- * Author: Mark A. Greer
- * mgreer@mvista.com
- *
- * Copyright 2001 MontaVista Software Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-
-#ifdef CONFIG_PCI
-
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <pci.h>
-#include <mpc824x.h>
-
-void pci_mpc824x_init (struct pci_controller *hose)
-{
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- /* System memory space */
- pci_set_region(hose->regions + 0,
- CHRP_PCI_MEMORY_BUS,
- CHRP_PCI_MEMORY_PHYS,
- CHRP_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
- /* PCI memory space */
- pci_set_region(hose->regions + 1,
- CHRP_PCI_MEM_BUS,
- CHRP_PCI_MEM_PHYS,
- CHRP_PCI_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* ISA/PCI memory space */
- pci_set_region(hose->regions + 2,
- CHRP_ISA_MEM_BUS,
- CHRP_ISA_MEM_PHYS,
- CHRP_ISA_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* PCI I/O space */
- pci_set_region(hose->regions + 3,
- CHRP_PCI_IO_BUS,
- CHRP_PCI_IO_PHYS,
- CHRP_PCI_IO_SIZE,
- PCI_REGION_IO);
-
- /* ISA/PCI I/O space */
- pci_set_region(hose->regions + 4,
- CHRP_ISA_IO_BUS,
- CHRP_ISA_IO_PHYS,
- CHRP_ISA_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = 5;
-
- pci_setup_indirect(hose,
- CHRP_REG_ADDR,
- CHRP_REG_DATA);
-
- pci_register_hose(hose);
-
- hose->last_busno = pci_hose_scan(hose);
-}
-
-#endif
diff --git a/arch/powerpc/cpu/mpc824x/speed.c b/arch/powerpc/cpu/mpc824x/speed.c
deleted file mode 100644
index e6064a1..0000000
--- a/arch/powerpc/cpu/mpc824x/speed.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * Gregory E. Allen, gallen@arlut.utexas.edu
- * Applied Research Laboratories, The University of Texas at Austin
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/* NOTE: This describes the proper use of this file.
- *
- * CONFIG_SYS_CLK_FREQ should be defined as the input frequency on
- * PCI_SYNC_IN .
- *
- * CONFIG_PLL_PCI_TO_MEM_MULTIPLIER is only required on MPC8240
- * boards. It should be defined as the PCI to Memory Multiplier as
- * documented in the MPC8240 Hardware Specs.
- *
- * Other mpc824x boards don't need CONFIG_PLL_PCI_TO_MEM_MULTIPLIER
- * because they can determine it from the PCR.
- *
- * Gary Milliorn <gary.milliorn@motorola.com> (who should know since
- * he designed the Sandpoint) told us that the PCR is not in all revs
- * of the MPC8240 CPU, so it's not guaranteeable and we cannot do
- * away with CONFIG_PLL_PCI_TO_MEM_MULTIPLIER altogether.
- */
-/* ------------------------------------------------------------------------- */
-
-/* This gives the PCI to Memory multiplier times 10 */
-/* The index is the value of PLL_CFG[0:4] */
-/* This is documented in the MPC8240/5 Hardware Specs */
-
-short pll_pci_to_mem_multiplier[] = {
-#if defined(CONFIG_MPC8240)
- 30, 30, 10, 10, 20, 10, 0, 10,
- 10, 0, 20, 0, 20, 0, 20, 0,
- 30, 0, 15, 0, 20, 0, 20, 0,
- 25, 0, 10, 0, 15, 15, 0, 0,
-#elif defined(CONFIG_MPC8245)
- 30, 30, 10, 10, 20, 10, 10, 10,
- 10, 20, 20, 15, 20, 15, 20, 30,
- 30, 40, 15, 40, 20, 25, 20, 40,
- 25, 20, 10, 20, 15, 15, 15, 0,
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-};
-
-#define CU824_PLL_STATE_REG 0xFE80002F
-#define PCR 0x800000E2
-
-/* ------------------------------------------------------------------------- */
-
-/* compute the memory bus clock frequency */
-ulong get_bus_freq (ulong dummy)
-{
- unsigned char pll_cfg;
-#if defined(CONFIG_MPC8240) && !defined(CONFIG_CU824)
- return (CONFIG_SYS_CLK_FREQ) * (CONFIG_PLL_PCI_TO_MEM_MULTIPLIER);
-#elif defined(CONFIG_CU824)
- pll_cfg = *(volatile unsigned char *) (CU824_PLL_STATE_REG);
- pll_cfg &= 0x1f;
-#else
- CONFIG_READ_BYTE(PCR, pll_cfg);
- pll_cfg = (pll_cfg >> 3) & 0x1f;
-#endif
- return ((CONFIG_SYS_CLK_FREQ) * pll_pci_to_mem_multiplier[pll_cfg] + 5) / 10;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-/* This gives the Memory to CPU Core multiplier times 10 */
-/* The index is the value of PLLRATIO in HID1 */
-/* This is documented in the MPC8240 Hardware Specs */
-/* This is not documented for MPC8245 ? FIXME */
-short pllratio_to_factor[] = {
- 0, 0, 0, 10, 20, 20, 25, 45,
- 30, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 10, 0, 0, 0, 45,
- 30, 0, 40, 0, 0, 0, 35, 0,
-};
-
-/* compute the CPU and memory bus clock frequencies */
-int get_clocks (void)
-{
- uint hid1 = mfspr(HID1);
- hid1 = (hid1 >> (32-5)) & 0x1f;
- gd->cpu_clk = (pllratio_to_factor[hid1] * get_bus_freq(0) + 5)
- / 10;
- gd->bus_clk = get_bus_freq(0);
- return (0);
-}
diff --git a/arch/powerpc/cpu/mpc824x/start.S b/arch/powerpc/cpu/mpc824x/start.S
deleted file mode 100644
index 55238df..0000000
--- a/arch/powerpc/cpu/mpc824x/start.S
+++ /dev/null
@@ -1,724 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* U-Boot - Startup Code for PowerPC based Embedded Boards
- *
- *
- * The processor starts at 0x00000100 and the code is executed
- * from flash. The code is organized to be at an other address
- * in memory, but as long we don't jump around before relocating.
- * board_init lies at a quite high address and when the cpu has
- * jumped there, everything is ok.
- * This works because the cpu gives the FLASH (CS0) the whole
- * address space at startup, and board_init lies as a echo of
- * the flash somewhere up there in the memorymap.
- *
- * board_init will change CS0 to be positioned at the correct
- * address and (s)dram will be positioned at address 0
- */
-#include <asm-offsets.h>
-#include <config.h>
-#include <mpc824x.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <asm/u-boot.h>
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-/* FP, Machine Check and Recoverable Interr. */
-#define MSR_KERNEL ( MSR_FP | MSR_ME | MSR_RI )
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(__bss_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
- .text
- .long 0x27051956 /* U-Boot Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION_STRING, "\0"
-
- . = EXC_OFF_SYS_RESET
- .globl _start
-_start:
- /* Initialize machine status; enable machine check interrupt */
- /*----------------------------------------------------------------------*/
- li r3, MSR_KERNEL /* Set FP, ME, RI flags */
- mtmsr r3
- mtspr SRR1, r3 /* Make SRR1 match MSR */
-
- addis r0,0,0x0000 /* lets make sure that r0 is really 0 */
- mtspr HID0, r0 /* disable I and D caches */
-
- mfspr r3, ICR /* clear Interrupt Cause Register */
-
- mfmsr r3 /* turn off address translation */
- addis r4,0,0xffff
- ori r4,r4,0xffcf
- and r3,r3,r4
- mtmsr r3
- isync
- sync /* the MMU should be off... */
-
-
-in_flash:
- /*
- * Setup BATs - cannot be done in C since we don't have a stack yet
- */
- bl setup_bats
-
- /* Enable MMU.
- */
- mfmsr r3
- ori r3, r3, (MSR_IR | MSR_DR)
- mtmsr r3
-
- /* Enable and invalidate data cache.
- */
- mfspr r3, HID0
- mr r2, r3
- ori r3, r3, HID0_DCE | HID0_DCI
- ori r2, r2, HID0_DCE
- sync
- mtspr HID0, r3
- mtspr HID0, r2
- sync
-
- /* Allocate Initial RAM in data cache.
- */
- lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
- li r2, 128
- mtctr r2
-1:
- dcbz r0, r3
- addi r3, r3, 32
- bdnz 1b
-
- /* Lock way0 in data cache.
- */
- mfspr r3, 1011
- lis r2, 0xffff
- ori r2, r2, 0xff1f
- and r3, r3, r2
- ori r3, r3, 0x0080
- sync
- mtspr 1011, r3
-
- /*
- * Thisk the stack pointer *somewhere* sensible. Doesnt
- * matter much where as we'll move it when we relocate
- */
- lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
- ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*----------------------------------------------------------------------*/
-
- GET_GOT /* initialize GOT access */
-
- /* r3: IMMR */
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
-
- bl board_init_f /* run 1st part of board init code (from Flash) */
-
- /* NOTREACHED - board_init_f() does not return */
-
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(EXC_OFF_MACH_CHCK, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(EXC_OFF_DATA_STOR, DataStorage, UnknownException)
-
-/* Instruction Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(EXC_OFF_INS_STOR, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(EXC_OFF_EXTERNAL, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = EXC_OFF_ALIGN
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = EXC_OFF_PROGRAM
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- /* No FPU on MPC8xx. This exception is not supposed to happen.
- */
- STD_EXCEPTION(EXC_OFF_FPUNAVAIL, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(EXC_OFF_DECR, Decrementer, timer_interrupt)
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
-
- STD_EXCEPTION(EXC_OFF_TRACE, SingleStep, UnknownException)
-
- STD_EXCEPTION(EXC_OFF_FPUNASSIST, Trap_0e, UnknownException)
- STD_EXCEPTION(EXC_OFF_PMI, Trap_0f, UnknownException)
-
- STD_EXCEPTION(EXC_OFF_ITME, InstructionTransMiss, UnknownException)
- STD_EXCEPTION(EXC_OFF_DLTME, DataLoadTransMiss, UnknownException)
- STD_EXCEPTION(EXC_OFF_DSTME, DataStoreTransMiss, UnknownException)
- STD_EXCEPTION(EXC_OFF_IABE, InstructionBreakpoint, DebugException)
- STD_EXCEPTION(EXC_OFF_SMIE, SysManageInt, UnknownException)
- STD_EXCEPTION(0x1500, Reserved5, UnknownException)
- STD_EXCEPTION(0x1600, Reserved6, UnknownException)
- STD_EXCEPTION(0x1700, Reserved7, UnknownException)
- STD_EXCEPTION(0x1800, Reserved8, UnknownException)
- STD_EXCEPTION(0x1900, Reserved9, UnknownException)
- STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
- STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
- STD_EXCEPTION(0x1c00, ReservedC, UnknownException)
- STD_EXCEPTION(0x1d00, ReservedD, UnknownException)
- STD_EXCEPTION(0x1e00, ReservedE, UnknownException)
- STD_EXCEPTION(0x1f00, ReservedF, UnknownException)
-
- STD_EXCEPTION(EXC_OFF_RMTE, RunModeTrace, UnknownException)
-
- .globl _end_of_vectors
-_end_of_vectors:
-
-
- . = 0x3000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
-#if 0
- andi. r23,r23,MSR_PR
- mfspr r23,SPRG3 /* if from user, fix up tss.regs */
- beq 2f
- addi r24,r1,STACK_FRAME_OVERHEAD
- stw r24,PT_REGS(r23)
-2: addi r2,r23,-TSS /* set r2 to current */
- tovirt(r2,r2,r23)
-#endif
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- mtspr SPRG2,r22 /* r1 is now kernel sp */
-#if 0
- addi r24,r2,TASK_STRUCT_SIZE /* check for kernel stack overflow */
- cmplw 0,r1,r2
- cmplw 1,r1,r24
- crand 1,1,4
- bgt stack_ovf /* if r2 < r1 < r2+TASK_STRUCT_SIZE */
-#endif
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- ori r20,r20,0x30 /* enable IR, DR */
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-/* Cache functions.
-*/
- .globl icache_enable
-icache_enable:
- mfspr r5,HID0 /* turn on the I cache. */
- ori r5,r5,0x8800 /* Instruction cache only! */
- addis r6,0,0xFFFF
- ori r6,r6,0xF7FF
- and r6,r5,r6 /* clear the invalidate bit */
- sync
- mtspr HID0,r5
- mtspr HID0,r6
- isync
- sync
- blr
-
- .globl icache_disable
-icache_disable:
- mfspr r5,HID0
- addis r6,0,0xFFFF
- ori r6,r6,0x7FFF
- and r5,r5,r6
- sync
- mtspr HID0,r5
- isync
- sync
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3, HID0
- srwi r3, r3, 15 /* >>15 & 1=> select bit 16 */
- andi. r3, r3, 1
- blr
-
- .globl dcache_enable
-dcache_enable:
- mfspr r5,HID0 /* turn on the D cache. */
- ori r5,r5,0x4400 /* Data cache only! */
- mfspr r4, PVR /* read PVR */
- srawi r3, r4, 16 /* shift off the least 16 bits */
- cmpi 0, 0, r3, 0xC /* Check for Max pvr */
- bne NotMax
- ori r5,r5,0x0040 /* setting the DCFA bit, for Max rev 1 errata */
-NotMax:
- addis r6,0,0xFFFF
- ori r6,r6,0xFBFF
- and r6,r5,r6 /* clear the invalidate bit */
- sync
- mtspr HID0,r5
- mtspr HID0,r6
- isync
- sync
- blr
-
- .globl dcache_disable
-dcache_disable:
- mfspr r5,HID0
- addis r6,0,0xFFFF
- ori r6,r6,0xBFFF
- and r5,r5,r6
- sync
- mtspr HID0,r5
- isync
- sync
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3, HID0
- srwi r3, r3, 14 /* >>14 & 1=> select bit 17 */
- andi. r3, r3, 1
- blr
-
- .globl dc_read
-dc_read:
-/*TODO : who uses this, what should it do?
-*/
- blr
-
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
-
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
-#ifdef CONFIG_SYS_RAMBOOT
- lis r4, CONFIG_SYS_SDRAM_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_SDRAM_BASE@l
-#else
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
-#endif
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* the the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-4:
-/* Unlock the data cache and invalidate locked area */
- xor r0, r0, r0
- mtspr 1011, r0
- lis r4, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r4, r4, CONFIG_SYS_INIT_RAM_ADDR@l
- li r0, 128
- mtctr r0
-41:
- dcbi r0, r4
- addi r4, r4, 32
- bdnz 41b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
- cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- cmpwi r0,0
- add r0,r0,r11
- stw r4,0(r3)
- beq- 5f
- stw r0,0(r4)
-5: bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(__bss_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- blt 5b
-6:
-
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mtlr r4 /* restore link register */
- blr
-
- /* Setup the BAT registers.
- */
-setup_bats:
- lis r4, CONFIG_SYS_IBAT0L@h
- ori r4, r4, CONFIG_SYS_IBAT0L@l
- lis r3, CONFIG_SYS_IBAT0U@h
- ori r3, r3, CONFIG_SYS_IBAT0U@l
- mtspr IBAT0L, r4
- mtspr IBAT0U, r3
- isync
-
- lis r4, CONFIG_SYS_DBAT0L@h
- ori r4, r4, CONFIG_SYS_DBAT0L@l
- lis r3, CONFIG_SYS_DBAT0U@h
- ori r3, r3, CONFIG_SYS_DBAT0U@l
- mtspr DBAT0L, r4
- mtspr DBAT0U, r3
- isync
-
- lis r4, CONFIG_SYS_IBAT1L@h
- ori r4, r4, CONFIG_SYS_IBAT1L@l
- lis r3, CONFIG_SYS_IBAT1U@h
- ori r3, r3, CONFIG_SYS_IBAT1U@l
- mtspr IBAT1L, r4
- mtspr IBAT1U, r3
- isync
-
- lis r4, CONFIG_SYS_DBAT1L@h
- ori r4, r4, CONFIG_SYS_DBAT1L@l
- lis r3, CONFIG_SYS_DBAT1U@h
- ori r3, r3, CONFIG_SYS_DBAT1U@l
- mtspr DBAT1L, r4
- mtspr DBAT1U, r3
- isync
-
- lis r4, CONFIG_SYS_IBAT2L@h
- ori r4, r4, CONFIG_SYS_IBAT2L@l
- lis r3, CONFIG_SYS_IBAT2U@h
- ori r3, r3, CONFIG_SYS_IBAT2U@l
- mtspr IBAT2L, r4
- mtspr IBAT2U, r3
- isync
-
- lis r4, CONFIG_SYS_DBAT2L@h
- ori r4, r4, CONFIG_SYS_DBAT2L@l
- lis r3, CONFIG_SYS_DBAT2U@h
- ori r3, r3, CONFIG_SYS_DBAT2U@l
- mtspr DBAT2L, r4
- mtspr DBAT2U, r3
- isync
-
- lis r4, CONFIG_SYS_IBAT3L@h
- ori r4, r4, CONFIG_SYS_IBAT3L@l
- lis r3, CONFIG_SYS_IBAT3U@h
- ori r3, r3, CONFIG_SYS_IBAT3U@l
- mtspr IBAT3L, r4
- mtspr IBAT3U, r3
- isync
-
- lis r4, CONFIG_SYS_DBAT3L@h
- ori r4, r4, CONFIG_SYS_DBAT3L@l
- lis r3, CONFIG_SYS_DBAT3U@h
- ori r3, r3, CONFIG_SYS_DBAT3U@l
- mtspr DBAT3L, r4
- mtspr DBAT3U, r3
- isync
-
- /* Invalidate TLBs.
- * -> for (val = 0; val < 0x20000; val+=0x1000)
- * -> tlbie(val);
- */
- lis r3, 0
- lis r5, 2
-
-1:
- tlbie r3
- addi r3, r3, 0x1000
- cmp 0, 0, r3, r5
- blt 1b
-
- blr
diff --git a/arch/powerpc/cpu/mpc824x/traps.c b/arch/powerpc/cpu/mpc824x/traps.c
deleted file mode 100644
index 6abf41d..0000000
--- a/arch/powerpc/cpu/mpc824x/traps.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * linux/arch/powerpc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <asm/processor.h>
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#define END_OF_MEM 0x00400000
-
-/*
- * Trap & Exception support
- */
-
-static void print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-void show_regs(struct pt_regs *regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0)
- {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7)
- {
- printf("\n");
- }
- }
-}
-
-
-static void _exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-void MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
- printf("Machine check in kernel mode.\n");
- printf("Caused by (from msr): ");
- printf("regs %p ",regs);
- switch( regs->msr & 0x000F0000) {
- case (0x80000000>>12):
- printf("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000>>13):
- printf("Transfer error ack signal\n");
- break;
- case (0x80000000>>14):
- printf("Data parity signal\n");
- break;
- case (0x80000000>>15):
- printf("Address parity signal\n");
- break;
- default:
- printf("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("machine check");
-}
-
-void AlignmentException(struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void ProgramCheckException(struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void SoftEmuException(struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-
-void UnknownException(struct pt_regs *regs)
-{
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-void DebugException(struct pt_regs *regs)
-{
-
- printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int addr_probe(uint *addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__( \
- "1: lwz %0,0(%1)\n" \
- " eieio\n" \
- " li %0,0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r" (retval) : "r"(addr));
-
- return (retval);
-#endif
- return 0;
-}
diff --git a/arch/powerpc/cpu/mpc824x/u-boot.lds b/arch/powerpc/cpu/mpc824x/u-boot.lds
deleted file mode 100644
index 04aba84..0000000
--- a/arch/powerpc/cpu/mpc824x/u-boot.lds
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * (C) Copyright 2001-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- .text :
- {
- arch/powerpc/cpu/mpc824x/start.o (.text*)
- *(.text*)
- . = ALIGN(16);
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 2ed51b1..db8cc8c 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1360,8 +1360,6 @@ void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
#elif defined(CONFIG_MPC8260)
#define _machine _MACH_8260
#define have_of 0
-#elif defined(CONFIG_SANDPOINT)
-#define _machine _MACH_sandpoint
#else
#error "Machine not defined correctly"
#endif
diff --git a/board/a3000/Kconfig b/board/a3000/Kconfig
deleted file mode 100644
index 21a9e48..0000000
--- a/board/a3000/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_A3000
-
-config SYS_BOARD
- default "a3000"
-
-config SYS_CONFIG_NAME
- default "A3000"
-
-endif
diff --git a/board/a3000/MAINTAINERS b/board/a3000/MAINTAINERS
deleted file mode 100644
index 303e5fd..0000000
--- a/board/a3000/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-A3000 BOARD
-#M: -
-S: Maintained
-F: board/a3000/
-F: include/configs/A3000.h
-F: configs/A3000_defconfig
diff --git a/board/a3000/Makefile b/board/a3000/Makefile
deleted file mode 100644
index 9b9b048..0000000
--- a/board/a3000/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = a3000.o flash.o
diff --git a/board/a3000/README b/board/a3000/README
deleted file mode 100644
index f0e92c5..0000000
--- a/board/a3000/README
+++ /dev/null
@@ -1,17 +0,0 @@
-U-Boot for Artis SBC-A3000
----------------------------
-
-Artis SBC-A3000 has one flash socket that the user uses Intel 28F128J3A (16MB)
-or 28F064J3A (8MB) chips.
-
-In board's notation, bank 0 is the one at the address of 0xFF000000.
-bank 1 is the one at the address of 0xFF800000
-
-On power-up the processor jumps to the address of 0xFFF00100, the last
-megabyte of the bank 0 of flash.
-
-Thus, U-Boot is configured to reside in flash starting at the address of
-0xFFF00000. The environment space is located in flash separately from
-U-Boot, at the address of 0xFFFE0000.
-
-There is a National ns83815 10/100M ethernet controller on-board.
diff --git a/board/a3000/a3000.c b/board/a3000/a3000.c
deleted file mode 100644
index 3e2f6b0..0000000
--- a/board/a3000/a3000.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * (C) Copyright 2001
- * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
- *
- * Modified during 2003 by
- * Ken Chou, kchou@ieee.org
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <pci.h>
-#include <netdev.h>
-
-int checkboard (void)
-{
- ulong busfreq = get_bus_freq(0);
- char buf[32];
-
- printf("Board: A3000 Local Bus at %s MHz\n", strmhz(buf, busfreq));
- return 0;
-
-}
-
-phys_size_t initdram (int board_type)
-{
- long size;
- long new_bank0_end;
- long mear1;
- long emear1;
-
- size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
-
- new_bank0_end = size - 1;
- mear1 = mpc824x_mpc107_getreg(MEAR1);
- emear1 = mpc824x_mpc107_getreg(EMEAR1);
- mear1 = (mear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
- emear1 = (emear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
- mpc824x_mpc107_setreg(MEAR1, mear1);
- mpc824x_mpc107_setreg(EMEAR1, emear1);
-
- return (size);
-}
-
-/*
- * Initialize PCI Devices
- */
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_a3000_config_table[] = {
- /* vendor, device, class */
- /* bus, dev, func */
- { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_83815, PCI_ANY_ID,
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, /* dp83815 eth0 divice */
- pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_IO |
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER }},
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, 0x14, PCI_ANY_ID, /* PCI slot1 */
- pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
- PCI_ENET1_MEMADDR,
- PCI_COMMAND_IO |
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER }},
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, 0x15, PCI_ANY_ID, /* PCI slot2 */
- pci_cfgfunc_config_device, { PCI_ENET2_IOADDR,
- PCI_ENET2_MEMADDR,
- PCI_COMMAND_IO |
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER }},
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, 0x16, PCI_ANY_ID, /* PCI slot3 */
- pci_cfgfunc_config_device, { PCI_ENET3_IOADDR,
- PCI_ENET3_MEMADDR,
- PCI_COMMAND_IO |
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER }},
- { }
-};
-#endif
-
-struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
- config_table: pci_a3000_config_table,
-#endif
-};
-
-void pci_init_board(void)
-{
- pci_mpc824x_init(&hose);
-}
-
-int board_eth_init(bd_t *bis)
-{
- return pci_eth_init(bis);
-}
diff --git a/board/a3000/flash.c b/board/a3000/flash.c
deleted file mode 100644
index f2dd3c2..0000000
--- a/board/a3000/flash.c
+++ /dev/null
@@ -1,438 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-
-#include <common.h>
-#include <mpc824x.h>
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef CONFIG_ENV_SIZE
-# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef CONFIG_ENV_SECT_SIZE
-# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-# endif
-#endif
-
-
-/*---------------------------------------------------------------------*/
-#define DEBUG_FLASH
-
-#ifdef DEBUG_FLASH
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-/*---------------------------------------------------------------------*/
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_char *addr, flash_info_t *info);
-static int write_data (flash_info_t *info, uchar *dest, uchar data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-#define BS(b) (b)
-#define BYTEME(x) ((x) & 0xFF)
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- unsigned long flash_banks[CONFIG_SYS_MAX_FLASH_BANKS] = CONFIG_SYS_FLASH_BANKS;
- unsigned long size, size_b[CONFIG_SYS_MAX_FLASH_BANKS];
-
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
- {
- flash_info[i].flash_id = FLASH_UNKNOWN;
-
- DEBUGF("Get flash bank %d @ 0x%08lx\n", i, flash_banks[i]);
-/*
- size_b[i] = flash_get_size((vu_char *)flash_banks[i], &flash_info[i]);
-*/
- size_b[i] = flash_get_size((vu_char *) 0xff800000 , &flash_info[i]);
-
- if (flash_info[i].flash_id == FLASH_UNKNOWN)
- {
- printf ("## Unknown FLASH on Bank %d: "
- "ID 0x%lx, Size = 0x%08lx = %ld MB\n",
- i, flash_info[i].flash_id,
- size_b[i], size_b[i]<<20);
- }
- else
- {
- DEBUGF("## Flash bank %d at 0x%08lx sizes: 0x%08lx \n",
- i, flash_banks[i], size_b[i]);
-
- flash_get_offsets (flash_banks[i], &flash_info[i]);
- flash_info[i].size = size_b[i];
- }
- }
-
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- DEBUGF("protect monitor %x @ %x\n", CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN);
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1,
- &flash_info[0]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- DEBUGF("protect environtment %x @ %x\n", CONFIG_ENV_ADDR, CONFIG_ENV_SECT_SIZE);
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
- &flash_info[0]);
-#endif
-
- size = 0;
- DEBUGF("## Final Flash bank sizes: ");
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i)
- {
- DEBUGF("%08lx ", size_b[i]);
- size += size_b[i];
- }
- DEBUGF("\n");
- return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_INTEL:
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base;
- base += 0x00020000; /* 128k per bank */
- }
- return;
-
- default:
- printf ("Don't know sector ofsets for flash type 0x%lx\n", info->flash_id);
- return;
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("Fujitsu "); break;
- case FLASH_MAN_SST: printf ("SST "); break;
- case FLASH_MAN_STM: printf ("STM "); break;
- case FLASH_MAN_INTEL: printf ("Intel "); break;
- case FLASH_MAN_MT: printf ("MT "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F320J3A:
- printf ("28F320J3A (32Mbit = 128K x 32)\n");
- break;
- case FLASH_28F640J3A:
- printf ("28F640J3A (64Mbit = 128K x 64)\n");
- break;
- case FLASH_28F128J3A:
- printf ("28F128J3A (128Mbit = 128K x 128)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
-#if 1
- if (info->size >= (1 << 20)) {
- i = 20;
- } else {
- i = 10;
- }
- printf (" Size: %ld %cB in %d Sectors\n",
- info->size >> i,
- (i == 20) ? 'M' : 'k',
- info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
-#endif
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (vu_char *addr, flash_info_t *info)
-{
- vu_char manuf, device;
-
- addr[0] = BS(0x90);
- manuf = BS(addr[0]);
- DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (ulong)addr, manuf);
-
- switch (manuf) {
- case BYTEME(AMD_MANUFACT):
- info->flash_id = FLASH_MAN_AMD;
- break;
- case BYTEME(FUJ_MANUFACT):
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case BYTEME(SST_MANUFACT):
- info->flash_id = FLASH_MAN_SST;
- break;
- case BYTEME(STM_MANUFACT):
- info->flash_id = FLASH_MAN_STM;
- break;
- case BYTEME(INTEL_MANUFACT):
- info->flash_id = FLASH_MAN_INTEL;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- addr[0] = BS(0xFF); /* restore read mode, (yes, BS is a NOP) */
- return 0; /* no or unknown flash */
- }
-
- device = BS(addr[2]); /* device ID */
-
- DEBUGF("Device ID @ 0x%08lx: 0x%08x\n", (ulong)(&addr[1]), device);
-
- switch (device) {
- case BYTEME(INTEL_ID_28F320J3A):
- info->flash_id += FLASH_28F320J3A;
- info->sector_count = 32;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case BYTEME(INTEL_ID_28F640J3A):
- info->flash_id += FLASH_28F640J3A;
- info->sector_count = 64;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- case BYTEME(INTEL_ID_28F128J3A):
- info->flash_id += FLASH_28F128J3A;
- info->sector_count = 128;
- info->size = 0x01000000;
- break; /* => 16 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- addr[0] = BS(0xFF); /* restore read mode (yes, a NOP) */
- return 0; /* => no or unknown flash */
-
- }
-
- if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
- printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- }
-
- addr[0] = BS(0xFF); /* restore read mode */
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- int flag, prot, sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) {
- printf ("Can erase only Intel flash types - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n", prot);
- } else {
- printf ("\n");
- }
-
- start = get_timer (0);
- last = start;
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- vu_char *addr = (vu_char *)(info->start[sect]);
- unsigned long status;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- *addr = BS(0x50); /* clear status register */
- *addr = BS(0x20); /* erase setup */
- *addr = BS(0xD0); /* erase confirm */
-
- /* re-enable interrupts if necessary */
- if (flag) {
- enable_interrupts();
- }
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
- if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- *addr = BS(0xB0); /* suspend erase */
- *addr = BS(0xFF); /* reset to read mode */
- return 1;
- }
-
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
- *addr = BS(0xFF); /* reset to read mode */
- }
- }
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-#define FLASH_WIDTH 1 /* flash bus width in bytes */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- uchar *wp = (uchar *)addr;
- int rc;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return 4;
- }
-
- while (cnt > 0) {
- if ((rc = write_data(info, wp, *src)) != 0) {
- return rc;
- }
- wp++;
- src++;
- cnt--;
- }
-
- return cnt;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t *info, uchar *dest, uchar data)
-{
- vu_char *addr = (vu_char *)dest;
- ulong status;
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((BS(*addr) & data) != data) {
- return 2;
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- *addr = BS(0x40); /* write setup */
- *addr = data;
-
- /* re-enable interrupts if necessary */
- if (flag) {
- enable_interrupts();
- }
-
- start = get_timer (0);
-
- while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *addr = BS(0xFF); /* restore read mode */
- return 1;
- }
- }
-
- *addr = BS(0xFF); /* restore read mode */
-
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/cpc45/Kconfig b/board/cpc45/Kconfig
deleted file mode 100644
index c564caf..0000000
--- a/board/cpc45/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_CPC45
-
-config SYS_BOARD
- default "cpc45"
-
-config SYS_CONFIG_NAME
- default "CPC45"
-
-endif
diff --git a/board/cpc45/MAINTAINERS b/board/cpc45/MAINTAINERS
deleted file mode 100644
index 163e09c..0000000
--- a/board/cpc45/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-CPC45 BOARD
-M: Josef Wagner <Wagner@Microsys.de>
-S: Maintained
-F: board/cpc45/
-F: include/configs/CPC45.h
-F: configs/CPC45_defconfig
-F: configs/CPC45_ROMBOOT_defconfig
diff --git a/board/cpc45/Makefile b/board/cpc45/Makefile
deleted file mode 100644
index 1310f93..0000000
--- a/board/cpc45/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = cpc45.o flash.o plx9030.o pd67290.o ide.o
diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c
deleted file mode 100644
index f182e79..0000000
--- a/board/cpc45/cpc45.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * (C) Copyright 2001
- * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <pci.h>
-#include <i2c.h>
-#include <netdev.h>
-
-int sysControlDisplay(int digit, uchar ascii_code);
-extern void Plx9030Init(void);
-extern void SPD67290Init(void);
-
- /* We have to clear the initial data area here. Couldn't have done it
- * earlier because DRAM had not been initialized.
- */
-int board_early_init_f(void)
-{
-
- /* enable DUAL UART Mode on CPC45 */
- *(uchar*)DUART_DCR |= 0x1; /* set DCM bit */
-
- return 0;
-}
-
-int checkboard(void)
-{
-/*
- char revision = BOARD_REV;
-*/
- ulong busfreq = get_bus_freq(0);
- char buf[32];
-
- puts ("CPC45 ");
-/*
- printf("Revision %d ", revision);
-*/
- printf("Local Bus at %s MHz\n", strmhz(buf, busfreq));
-
- return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
- int m, row, col, bank, i, ref;
- unsigned long start, end;
- uint32_t mccr1, mccr2;
- uint32_t mear1 = 0, emear1 = 0, msar1 = 0, emsar1 = 0;
- uint32_t mear2 = 0, emear2 = 0, msar2 = 0, emsar2 = 0;
- uint8_t mber = 0;
- unsigned int tmp;
-
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
- if (i2c_reg_read (0x50, 2) != 0x04)
- return 0; /* Memory type */
-
- m = i2c_reg_read (0x50, 5); /* # of physical banks */
- row = i2c_reg_read (0x50, 3); /* # of rows */
- col = i2c_reg_read (0x50, 4); /* # of columns */
- bank = i2c_reg_read (0x50, 17); /* # of logical banks */
- ref = i2c_reg_read (0x50, 12); /* refresh rate / type */
-
- CONFIG_READ_WORD(MCCR1, mccr1);
- mccr1 &= 0xffff0000;
-
- CONFIG_READ_WORD(MCCR2, mccr2);
- mccr2 &= 0xffff0000;
-
- start = CONFIG_SYS_SDRAM_BASE;
- end = start + (1 << (col + row + 3) ) * bank - 1;
-
- for (i = 0; i < m; i++) {
- mccr1 |= ((row == 13)? 2 : (bank == 4)? 0 : 3) << i * 2;
- if (i < 4) {
- msar1 |= ((start >> 20) & 0xff) << i * 8;
- emsar1 |= ((start >> 28) & 0xff) << i * 8;
- mear1 |= ((end >> 20) & 0xff) << i * 8;
- emear1 |= ((end >> 28) & 0xff) << i * 8;
- } else {
- msar2 |= ((start >> 20) & 0xff) << (i-4) * 8;
- emsar2 |= ((start >> 28) & 0xff) << (i-4) * 8;
- mear2 |= ((end >> 20) & 0xff) << (i-4) * 8;
- emear2 |= ((end >> 28) & 0xff) << (i-4) * 8;
- }
- mber |= 1 << i;
- start += (1 << (col + row + 3) ) * bank;
- end += (1 << (col + row + 3) ) * bank;
- }
- for (; i < 8; i++) {
- if (i < 4) {
- msar1 |= 0xff << i * 8;
- emsar1 |= 0x30 << i * 8;
- mear1 |= 0xff << i * 8;
- emear1 |= 0x30 << i * 8;
- } else {
- msar2 |= 0xff << (i-4) * 8;
- emsar2 |= 0x30 << (i-4) * 8;
- mear2 |= 0xff << (i-4) * 8;
- emear2 |= 0x30 << (i-4) * 8;
- }
- }
-
- switch(ref) {
- case 0x00:
- case 0x80:
- tmp = get_bus_freq(0) / 1000000 * 15625 / 1000 - 22;
- break;
- case 0x01:
- case 0x81:
- tmp = get_bus_freq(0) / 1000000 * 3900 / 1000 - 22;
- break;
- case 0x02:
- case 0x82:
- tmp = get_bus_freq(0) / 1000000 * 7800 / 1000 - 22;
- break;
- case 0x03:
- case 0x83:
- tmp = get_bus_freq(0) / 1000000 * 31300 / 1000 - 22;
- break;
- case 0x04:
- case 0x84:
- tmp = get_bus_freq(0) / 1000000 * 62500 / 1000 - 22;
- break;
- case 0x05:
- case 0x85:
- tmp = get_bus_freq(0) / 1000000 * 125000 / 1000 - 22;
- break;
- default:
- tmp = 0x512;
- break;
- }
-
- CONFIG_WRITE_WORD(MCCR1, mccr1);
- CONFIG_WRITE_WORD(MCCR2, tmp << MCCR2_REFINT_SHIFT);
- CONFIG_WRITE_WORD(MSAR1, msar1);
- CONFIG_WRITE_WORD(EMSAR1, emsar1);
- CONFIG_WRITE_WORD(MEAR1, mear1);
- CONFIG_WRITE_WORD(EMEAR1, emear1);
- CONFIG_WRITE_WORD(MSAR2, msar2);
- CONFIG_WRITE_WORD(EMSAR2, emsar2);
- CONFIG_WRITE_WORD(MEAR2, mear2);
- CONFIG_WRITE_WORD(EMEAR2, emear2);
- CONFIG_WRITE_BYTE(MBER, mber);
-
- return (1 << (col + row + 3) ) * bank * m;
-}
-
-
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-static struct pci_config_table pci_cpc45_config_table[] = {
-#ifndef CONFIG_PCI_PNP
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0F, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0D, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCI_PLX9030_IOADDR,
- PCI_PLX9030_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0E, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCMCIA_IO_BASE,
- PCMCIA_IO_BASE,
- PCI_COMMAND_MEMORY | PCI_COMMAND_IO }},
-#endif /*CONFIG_PCI_PNP*/
- { }
-};
-
-struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
- config_table: pci_cpc45_config_table,
-#endif
-};
-
-void pci_init_board(void)
-{
- pci_mpc824x_init(&hose);
-
- /* init PCI_to_LOCAL Bus BRIDGE */
- Plx9030Init();
-
- /* Clear Display */
- DISP_CWORD = 0x0;
-
- sysControlDisplay(0,' ');
- sysControlDisplay(1,'C');
- sysControlDisplay(2,'P');
- sysControlDisplay(3,'C');
- sysControlDisplay(4,' ');
- sysControlDisplay(5,'4');
- sysControlDisplay(6,'5');
- sysControlDisplay(7,' ');
-
-}
-
-/**************************************************************************
-*
-* sysControlDisplay - controls one of the Alphanum. Display digits.
-*
-* This routine will write an ASCII character to the display digit requested.
-*
-* SEE ALSO:
-*
-* RETURNS: NA
-*/
-
-int sysControlDisplay (int digit, /* number of digit 0..7 */
- uchar ascii_code /* ASCII code */
- )
-{
- if ((digit < 0) || (digit > 7))
- return (-1);
-
- *((volatile uchar *) (DISP_CHR_RAM + digit)) = ascii_code;
-
- return (0);
-}
-
-#if defined(CONFIG_CMD_PCMCIA)
-
-#ifdef CONFIG_SYS_PCMCIA_MEM_ADDR
-volatile unsigned char *pcmcia_mem = (unsigned char*)CONFIG_SYS_PCMCIA_MEM_ADDR;
-#endif
-
-int pcmcia_init(void)
-{
- u_int rc;
-
- debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
-
- rc = i82365_init();
-
- return rc;
-}
-
-#endif
-
-int board_eth_init(bd_t *bis)
-{
- return pci_eth_init(bis);
-}
diff --git a/board/cpc45/flash.c b/board/cpc45/flash.c
deleted file mode 100644
index 917db34..0000000
--- a/board/cpc45/flash.c
+++ /dev/null
@@ -1,506 +0,0 @@
-/*
- * (C) Copyright 2001-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef CONFIG_ENV_SIZE
-# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef CONFIG_ENV_SECT_SIZE
-# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-# endif
-#endif
-
-#define FLASH_BANK_SIZE 0x800000
-#define MAIN_SECT_SIZE 0x40000
-#define PARAM_SECT_SIZE 0x8000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-static int write_data (flash_info_t * info, ulong dest, ulong * data);
-static void write_via_fpu (vu_long * addr, ulong * data);
-static __inline__ unsigned long get_msr (void);
-static __inline__ void set_msr (unsigned long msr);
-
-/*---------------------------------------------------------------------*/
-#undef DEBUG_FLASH
-
-/*---------------------------------------------------------------------*/
-#ifdef DEBUG_FLASH
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-/*---------------------------------------------------------------------*/
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- int i, j;
- ulong size = 0;
- uchar tempChar;
- vu_long *tmpaddr;
-
- /* Enable flash writes on CPC45 */
-
- tempChar = BOARD_CTRL;
-
- tempChar |= (B_CTRL_FWPT_1 | B_CTRL_FWRE_1);
-
- tempChar &= ~(B_CTRL_FWPT_0 | B_CTRL_FWRE_0);
-
- BOARD_CTRL = tempChar;
-
- __asm__ volatile ("sync\n eieio");
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- vu_long *addr = (vu_long *) (CONFIG_SYS_FLASH_BASE + i * FLASH_BANK_SIZE);
-
- addr[0] = 0x00900090;
-
- __asm__ volatile ("sync\n eieio");
-
- udelay (100);
-
- DEBUGF ("Flash bank # %d:\n"
- "\tManuf. ID @ 0x%08lX: 0x%08lX\n"
- "\tDevice ID @ 0x%08lX: 0x%08lX\n",
- i,
- (ulong) (&addr[0]), addr[0],
- (ulong) (&addr[2]), addr[2]);
-
-
- if ((addr[0] == addr[1]) && (addr[0] == INTEL_MANUFACT) &&
- (addr[2] == addr[3]) && (addr[2] == INTEL_ID_28F160F3T)) {
-
- flash_info[i].flash_id =
- (FLASH_MAN_INTEL & FLASH_VENDMASK) |
- (INTEL_ID_28F160F3T & FLASH_TYPEMASK);
-
- } else if ((addr[0] == addr[1]) && (addr[0] == INTEL_MANUFACT)
- && (addr[2] == addr[3])
- && (addr[2] == INTEL_ID_28F160C3T)) {
-
- flash_info[i].flash_id =
- (FLASH_MAN_INTEL & FLASH_VENDMASK) |
- (INTEL_ID_28F160C3T & FLASH_TYPEMASK);
-
- } else {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- addr[0] = 0xFFFFFFFF;
- goto Done;
- }
-
- DEBUGF ("flash_id = 0x%08lX\n", flash_info[i].flash_id);
-
- addr[0] = 0xFFFFFFFF;
-
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- for (j = 0; j < flash_info[i].sector_count; j++) {
- if (j > 30) {
- flash_info[i].start[j] = CONFIG_SYS_FLASH_BASE +
- i * FLASH_BANK_SIZE +
- (MAIN_SECT_SIZE * 31) + (j -
- 31) *
- PARAM_SECT_SIZE;
- } else {
- flash_info[i].start[j] = CONFIG_SYS_FLASH_BASE +
- i * FLASH_BANK_SIZE +
- j * MAIN_SECT_SIZE;
- }
- }
-
- /* unlock sectors, if 160C3T */
-
- for (j = 0; j < flash_info[i].sector_count; j++) {
- tmpaddr = (vu_long *) flash_info[i].start[j];
-
- if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
- (INTEL_ID_28F160C3T & FLASH_TYPEMASK)) {
- tmpaddr[0] = 0x00600060;
- tmpaddr[0] = 0x00D000D0;
- tmpaddr[1] = 0x00600060;
- tmpaddr[1] = 0x00D000D0;
- }
- }
-
- size += flash_info[i].size;
-
- addr[0] = 0x00FF00FF;
- addr[1] = 0x00FF00FF;
- }
-
- /* Protect monitor and environment sectors
- */
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE + FLASH_BANK_SIZE
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[1]);
-#else
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
-#if CONFIG_ENV_ADDR >= CONFIG_SYS_FLASH_BASE + FLASH_BANK_SIZE
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[1]);
-#else
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-#endif
-#endif
-
-Done:
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch ((i = info->flash_id & FLASH_VENDMASK)) {
- case (FLASH_MAN_INTEL & FLASH_VENDMASK):
- printf ("Intel: ");
- break;
- default:
- printf ("Unknown Vendor 0x%04x ", i);
- break;
- }
-
- switch ((i = info->flash_id & FLASH_TYPEMASK)) {
- case (INTEL_ID_28F160F3T & FLASH_TYPEMASK):
- printf ("28F160F3T (16Mbit)\n");
- break;
-
- case (INTEL_ID_28F160C3T & FLASH_TYPEMASK):
- printf ("28F160C3T (16Mbit)\n");
- break;
-
- default:
- printf ("Unknown Chip Type 0x%04x\n", i);
- goto Done;
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-
-Done:
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag, prot, sect;
- ulong start, now, last;
-
- DEBUGF ("Erase flash bank %d sect %d ... %d\n",
- info - &flash_info[0], s_first, s_last);
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (FLASH_MAN_INTEL & FLASH_VENDMASK)) {
- printf ("Can erase only Intel flash types - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n", prot);
- } else {
- printf ("\n");
- }
-
- start = get_timer (0);
- last = start;
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- vu_long *addr = (vu_long *) (info->start[sect]);
-
- DEBUGF ("Erase sect %d @ 0x%08lX\n",
- sect, (ulong) addr);
-
- /* Disable interrupts which might cause a timeout
- * here.
- */
- flag = disable_interrupts ();
-
- addr[0] = 0x00500050; /* clear status register */
- addr[0] = 0x00200020; /* erase setup */
- addr[0] = 0x00D000D0; /* erase confirm */
-
- addr[1] = 0x00500050; /* clear status register */
- addr[1] = 0x00200020; /* erase setup */
- addr[1] = 0x00D000D0; /* erase confirm */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- while (((addr[0] & 0x00800080) != 0x00800080) ||
- ((addr[1] & 0x00800080) != 0x00800080)) {
- if ((now = get_timer (start)) >
- CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- addr[0] = 0x00B000B0; /* suspend erase */
- addr[0] = 0x00FF00FF; /* to read mode */
- return 1;
- }
-
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
- addr[0] = 0x00FF00FF;
- }
- }
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-#define FLASH_WIDTH 8 /* flash bus width in bytes */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong wp, cp, msr;
- int l, rc, i;
- ulong data[2];
- ulong *datah = &data[0];
- ulong *datal = &data[1];
-
- DEBUGF ("Flash write_buff: @ 0x%08lx, src 0x%08lx len %ld\n",
- addr, (ulong) src, cnt);
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return 4;
- }
-
- msr = get_msr ();
- set_msr (msr | MSR_FP);
-
- wp = (addr & ~(FLASH_WIDTH - 1)); /* get lower aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- *datah = *datal = 0;
-
- for (i = 0, cp = wp; i < l; i++, cp++) {
- if (i >= 4) {
- *datah = (*datah << 8) |
- ((*datal & 0xFF000000) >> 24);
- }
-
- *datal = (*datal << 8) | (*(uchar *) cp);
- }
- for (; i < FLASH_WIDTH && cnt > 0; ++i) {
- char tmp = *src++;
-
- if (i >= 4) {
- *datah = (*datah << 8) |
- ((*datal & 0xFF000000) >> 24);
- }
-
- *datal = (*datal << 8) | tmp;
- --cnt;
- ++cp;
- }
-
- for (; cnt == 0 && i < FLASH_WIDTH; ++i, ++cp) {
- if (i >= 4) {
- *datah = (*datah << 8) |
- ((*datal & 0xFF000000) >> 24);
- }
-
- *datal = (*datah << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_data (info, wp, data)) != 0) {
- set_msr (msr);
- return (rc);
- }
-
- wp += FLASH_WIDTH;
- }
-
- /*
- * handle FLASH_WIDTH aligned part
- */
- while (cnt >= FLASH_WIDTH) {
- *datah = *(ulong *) src;
- *datal = *(ulong *) (src + 4);
- if ((rc = write_data (info, wp, data)) != 0) {
- set_msr (msr);
- return (rc);
- }
- wp += FLASH_WIDTH;
- cnt -= FLASH_WIDTH;
- src += FLASH_WIDTH;
- }
-
- if (cnt == 0) {
- set_msr (msr);
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- *datah = *datal = 0;
- for (i = 0, cp = wp; i < FLASH_WIDTH && cnt > 0; ++i, ++cp) {
- char tmp = *src++;
-
- if (i >= 4) {
- *datah = (*datah << 8) | ((*datal & 0xFF000000) >>
- 24);
- }
-
- *datal = (*datal << 8) | tmp;
- --cnt;
- }
-
- for (; i < FLASH_WIDTH; ++i, ++cp) {
- if (i >= 4) {
- *datah = (*datah << 8) | ((*datal & 0xFF000000) >>
- 24);
- }
-
- *datal = (*datal << 8) | (*(uchar *) cp);
- }
-
- rc = write_data (info, wp, data);
- set_msr (msr);
-
- return (rc);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t * info, ulong dest, ulong * data)
-{
- vu_long *addr = (vu_long *) dest;
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if (((addr[0] & data[0]) != data[0]) ||
- ((addr[1] & data[1]) != data[1])) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- addr[0] = 0x00400040; /* write setup */
- write_via_fpu (addr, data);
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- start = get_timer (0);
-
- while (((addr[0] & 0x00800080) != 0x00800080) ||
- ((addr[1] & 0x00800080) != 0x00800080)) {
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- addr[0] = 0x00FF00FF; /* restore read mode */
- return (1);
- }
- }
-
- addr[0] = 0x00FF00FF; /* restore read mode */
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void write_via_fpu (vu_long * addr, ulong * data)
-{
- __asm__ __volatile__ ("lfd 1, 0(%0)"::"r" (data));
- __asm__ __volatile__ ("stfd 1, 0(%0)"::"r" (addr));
-}
-
-/*-----------------------------------------------------------------------
- */
-static __inline__ unsigned long get_msr (void)
-{
- unsigned long msr;
-
- __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
-
- return msr;
-}
-
-static __inline__ void set_msr (unsigned long msr)
-{
- __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
-}
diff --git a/board/cpc45/ide.c b/board/cpc45/ide.c
deleted file mode 100644
index 1944e36..0000000
--- a/board/cpc45/ide.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * (C) Copyright 2001
- * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
- *
- * (C) Copyright 2000-2011
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <ide.h>
-#include <ata.h>
-#include <asm/io.h>
-
-#define EIEIO __asm__ volatile ("eieio")
-#define SYNC __asm__ volatile ("sync")
-
-void ide_input_swap_data(int dev, ulong *sect_buf, int words)
-{
- uchar i;
- volatile uchar *pbuf_even =
- (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
- volatile uchar *pbuf_odd =
- (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
- ushort *dbuf = (ushort *) sect_buf;
-
- while (words--) {
- for (i = 0; i < 2; i++) {
- *(((uchar *) (dbuf)) + 1) = *pbuf_even;
- *(uchar *) dbuf = *pbuf_odd;
- dbuf += 1;
- }
- }
-}
-
-void ide_input_data(int dev, ulong *sect_buf, int words)
-{
- uchar *dbuf;
- volatile uchar *pbuf_even;
- volatile uchar *pbuf_odd;
-
- pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
- pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
- dbuf = (uchar *) sect_buf;
- while (words--) {
- *dbuf++ = *pbuf_even;
- EIEIO;
- SYNC;
- *dbuf++ = *pbuf_odd;
- EIEIO;
- SYNC;
- *dbuf++ = *pbuf_even;
- EIEIO;
- SYNC;
- *dbuf++ = *pbuf_odd;
- EIEIO;
- SYNC;
- }
-}
-
-void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts)
-{
- uchar *dbuf;
- volatile uchar *pbuf_even;
- volatile uchar *pbuf_odd;
-
- pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
- pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
- dbuf = (uchar *) sect_buf;
- while (shorts--) {
- EIEIO;
- *dbuf++ = *pbuf_even;
- EIEIO;
- *dbuf++ = *pbuf_odd;
- }
-}
-
-void ide_output_data(int dev, const ulong *sect_buf, int words)
-{
- uchar *dbuf;
- volatile uchar *pbuf_even;
- volatile uchar *pbuf_odd;
-
- pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
- pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
- dbuf = (uchar *) sect_buf;
- while (words--) {
- EIEIO;
- *pbuf_even = *dbuf++;
- EIEIO;
- *pbuf_odd = *dbuf++;
- EIEIO;
- *pbuf_even = *dbuf++;
- EIEIO;
- *pbuf_odd = *dbuf++;
- }
-}
-
-void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts)
-{
- uchar *dbuf;
- volatile uchar *pbuf_even;
- volatile uchar *pbuf_odd;
-
- pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
- pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
- dbuf = (uchar *) sect_buf;
- while (shorts--) {
- EIEIO;
- *pbuf_even = *dbuf++;
- EIEIO;
- *pbuf_odd = *dbuf++;
- }
-}
-
-void ide_led(uchar led, uchar status)
-{
- u_char val;
- /* We have one PCMCIA slot and use LED H4 for the IDE Interface */
- val = readb(BCSR_BASE + 0x04);
- if (status) /* led on */
- val |= B_CTRL_LED0;
- else
- val &= ~B_CTRL_LED0;
-
- writeb(val, BCSR_BASE + 0x04);
-}
diff --git a/board/cpc45/pd67290.c b/board/cpc45/pd67290.c
deleted file mode 100644
index 23d87f6..0000000
--- a/board/cpc45/pd67290.c
+++ /dev/null
@@ -1,797 +0,0 @@
-/*
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- ********************************************************************
- *
- * Lots of code copied from:
- *
- * i82365.c 1.352 - Linux driver for Intel 82365 and compatible
- * PC Card controllers, and Yenta-compatible PCI-to-CardBus controllers.
- * (C) 1999 David A. Hinds <dahinds@users.sourceforge.net>
- */
-
-#include <common.h>
-
-#ifdef CONFIG_I82365
-
-#include <command.h>
-#include <pci.h>
-#include <pcmcia.h>
-#include <asm/io.h>
-
-#include <pcmcia/ss.h>
-#include <pcmcia/i82365.h>
-#include <pcmcia/yenta.h>
-#include <pcmcia/cirrus.h>
-
-static struct pci_device_id supported[] = {
- {PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_6729},
- {0, 0}
-};
-
-#define CYCLE_TIME 120
-
-#ifdef DEBUG
-static void i82365_dump_regions (pci_dev_t dev);
-#endif
-
-typedef struct socket_info_t {
- pci_dev_t dev;
- u_short bcr;
- u_char pci_lat, cb_lat, sub_bus, cache;
- u_int cb_phys;
-
- socket_cap_t cap;
- u_short type;
- u_int flags;
- cirrus_state_t c_state;
-} socket_info_t;
-
-/* These definitions must match the pcic table! */
-typedef enum pcic_id {
- IS_PD6710, IS_PD672X, IS_VT83C469
-} pcic_id;
-
-typedef struct pcic_t {
- char *name;
-} pcic_t;
-
-static pcic_t pcic[] = {
- {" Cirrus PD6710: "},
- {" Cirrus PD672x: "},
- {" VIA VT83C469: "},
-};
-
-static socket_info_t socket;
-static socket_state_t state;
-static struct pccard_mem_map mem;
-static struct pccard_io_map io;
-
-/*====================================================================*/
-
-/* Some PCI shortcuts */
-
-static int pci_readb (socket_info_t * s, int r, u_char * v)
-{
- return pci_read_config_byte (s->dev, r, v);
-}
-static int pci_writeb (socket_info_t * s, int r, u_char v)
-{
- return pci_write_config_byte (s->dev, r, v);
-}
-static int pci_readw (socket_info_t * s, int r, u_short * v)
-{
- return pci_read_config_word (s->dev, r, v);
-}
-static int pci_writew (socket_info_t * s, int r, u_short v)
-{
- return pci_write_config_word (s->dev, r, v);
-}
-
-/*====================================================================*/
-
-#define cb_readb(s) readb((s)->cb_phys + 1)
-#define cb_writeb(s, v) writeb(v, (s)->cb_phys)
-#define cb_writeb2(s, v) writeb(v, (s)->cb_phys + 1)
-#define cb_readl(s, r) readl((s)->cb_phys + (r))
-#define cb_writel(s, r, v) writel(v, (s)->cb_phys + (r))
-
-
-static u_char i365_get (socket_info_t * s, u_short reg)
-{
- u_char val;
-#ifdef CONFIG_PCMCIA_SLOT_A
- int slot = 0;
-#else
- int slot = 1;
-#endif
-
- val = I365_REG (slot, reg);
-
- cb_writeb (s, val);
- val = cb_readb (s);
-
- debug ("i365_get slot:%x reg: %x val: %x\n", slot, reg, val);
- return val;
-}
-
-static void i365_set (socket_info_t * s, u_short reg, u_char data)
-{
-#ifdef CONFIG_PCMCIA_SLOT_A
- int slot = 0;
-#else
- int slot = 1;
-#endif
- u_char val;
-
- val = I365_REG (slot, reg);
-
- cb_writeb (s, val);
- cb_writeb2 (s, data);
-
- debug ("i365_set slot:%x reg: %x data:%x\n", slot, reg, data);
-}
-
-static void i365_bset (socket_info_t * s, u_short reg, u_char mask)
-{
- i365_set (s, reg, i365_get (s, reg) | mask);
-}
-
-static void i365_bclr (socket_info_t * s, u_short reg, u_char mask)
-{
- i365_set (s, reg, i365_get (s, reg) & ~mask);
-}
-
-#if 0 /* not used */
-static void i365_bflip (socket_info_t * s, u_short reg, u_char mask, int b)
-{
- u_char d = i365_get (s, reg);
-
- i365_set (s, reg, (b) ? (d | mask) : (d & ~mask));
-}
-
-static u_short i365_get_pair (socket_info_t * s, u_short reg)
-{
- return (i365_get (s, reg) + (i365_get (s, reg + 1) << 8));
-}
-#endif /* not used */
-
-static void i365_set_pair (socket_info_t * s, u_short reg, u_short data)
-{
- i365_set (s, reg, data & 0xff);
- i365_set (s, reg + 1, data >> 8);
-}
-
-/*======================================================================
-
- Code to save and restore global state information for Cirrus
- PD67xx controllers, and to set and report global configuration
- options.
-
-======================================================================*/
-
-#define flip(v,b,f) (v = ((f)<0) ? v : ((f) ? ((v)|(b)) : ((v)&(~b))))
-
-static void cirrus_get_state (socket_info_t * s)
-{
- int i;
- cirrus_state_t *p = &s->c_state;
-
- p->misc1 = i365_get (s, PD67_MISC_CTL_1);
- p->misc1 &= (PD67_MC1_MEDIA_ENA | PD67_MC1_INPACK_ENA);
- p->misc2 = i365_get (s, PD67_MISC_CTL_2);
- for (i = 0; i < 6; i++)
- p->timer[i] = i365_get (s, PD67_TIME_SETUP (0) + i);
-
-}
-
-static void cirrus_set_state (socket_info_t * s)
-{
- int i;
- u_char misc;
- cirrus_state_t *p = &s->c_state;
-
- misc = i365_get (s, PD67_MISC_CTL_2);
- i365_set (s, PD67_MISC_CTL_2, p->misc2);
- if (misc & PD67_MC2_SUSPEND)
- udelay (50000);
- misc = i365_get (s, PD67_MISC_CTL_1);
- misc &= ~(PD67_MC1_MEDIA_ENA | PD67_MC1_INPACK_ENA);
- i365_set (s, PD67_MISC_CTL_1, misc | p->misc1);
- for (i = 0; i < 6; i++)
- i365_set (s, PD67_TIME_SETUP (0) + i, p->timer[i]);
-}
-
-static u_int cirrus_set_opts (socket_info_t * s)
-{
- cirrus_state_t *p = &s->c_state;
- u_int mask = 0xffff;
- char buf[200] = {0};
-
- if (has_ring == -1)
- has_ring = 1;
- flip (p->misc2, PD67_MC2_IRQ15_RI, has_ring);
- flip (p->misc2, PD67_MC2_DYNAMIC_MODE, dynamic_mode);
-#if DEBUG
- if (p->misc2 & PD67_MC2_IRQ15_RI)
- strcat (buf, " [ring]");
- if (p->misc2 & PD67_MC2_DYNAMIC_MODE)
- strcat (buf, " [dyn mode]");
- if (p->misc1 & PD67_MC1_INPACK_ENA)
- strcat (buf, " [inpack]");
-#endif
-
- if (p->misc2 & PD67_MC2_IRQ15_RI)
- mask &= ~0x8000;
- if (has_led > 0) {
-#if DEBUG
- strcat (buf, " [led]");
-#endif
- mask &= ~0x1000;
- }
- if (has_dma > 0) {
-#if DEBUG
- strcat (buf, " [dma]");
-#endif
- mask &= ~0x0600;
- flip (p->misc2, PD67_MC2_FREQ_BYPASS, freq_bypass);
-#if DEBUG
- if (p->misc2 & PD67_MC2_FREQ_BYPASS)
- strcat (buf, " [freq bypass]");
-#endif
- }
-
- if (setup_time >= 0)
- p->timer[0] = p->timer[3] = setup_time;
- if (cmd_time > 0) {
- p->timer[1] = cmd_time;
- p->timer[4] = cmd_time * 2 + 4;
- }
- if (p->timer[1] == 0) {
- p->timer[1] = 6;
- p->timer[4] = 16;
- if (p->timer[0] == 0)
- p->timer[0] = p->timer[3] = 1;
- }
- if (recov_time >= 0)
- p->timer[2] = p->timer[5] = recov_time;
-
- debug ("i82365 Opt: %s [%d/%d/%d] [%d/%d/%d]\n",
- buf,
- p->timer[0], p->timer[1], p->timer[2],
- p->timer[3], p->timer[4], p->timer[5]);
-
- return mask;
-}
-
-/*======================================================================
-
- Routines to handle common CardBus options
-
-======================================================================*/
-
-/* Default settings for PCI command configuration register */
-#define CMD_DFLT (PCI_COMMAND_IO|PCI_COMMAND_MEMORY| \
- PCI_COMMAND_MASTER|PCI_COMMAND_WAIT)
-
-static void cb_get_state (socket_info_t * s)
-{
- pci_readb (s, PCI_CACHE_LINE_SIZE, &s->cache);
- pci_readb (s, PCI_LATENCY_TIMER, &s->pci_lat);
- pci_readb (s, CB_LATENCY_TIMER, &s->cb_lat);
- pci_readb (s, CB_CARDBUS_BUS, &s->cap.cardbus);
- pci_readb (s, CB_SUBORD_BUS, &s->sub_bus);
- pci_readw (s, CB_BRIDGE_CONTROL, &s->bcr);
-}
-
-static void cb_set_state (socket_info_t * s)
-{
- pci_writew (s, PCI_COMMAND, CMD_DFLT);
- pci_writeb (s, PCI_CACHE_LINE_SIZE, s->cache);
- pci_writeb (s, PCI_LATENCY_TIMER, s->pci_lat);
- pci_writeb (s, CB_LATENCY_TIMER, s->cb_lat);
- pci_writeb (s, CB_CARDBUS_BUS, s->cap.cardbus);
- pci_writeb (s, CB_SUBORD_BUS, s->sub_bus);
- pci_writew (s, CB_BRIDGE_CONTROL, s->bcr);
-}
-
-static void cb_set_opts (socket_info_t * s)
-{
-}
-
-/*======================================================================
-
- Power control for Cardbus controllers: used both for 16-bit and
- Cardbus cards.
-
-======================================================================*/
-
-static int cb_set_power (socket_info_t * s, socket_state_t * state)
-{
- u_int reg = 0;
-
- reg = I365_PWR_NORESET;
- if (state->flags & SS_PWR_AUTO)
- reg |= I365_PWR_AUTO;
- if (state->flags & SS_OUTPUT_ENA)
- reg |= I365_PWR_OUT;
- if (state->Vpp != 0) {
- if (state->Vpp == 120) {
- reg |= I365_VPP1_12V;
- puts (" 12V card found: ");
- } else if (state->Vpp == state->Vcc) {
- reg |= I365_VPP1_5V;
- } else {
- puts (" power not found: ");
- return -1;
- }
- }
- if (state->Vcc != 0) {
- reg |= I365_VCC_5V;
- if (state->Vcc == 33) {
- puts (" 3.3V card found: ");
- i365_bset (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
- } else if (state->Vcc == 50) {
- puts (" 5V card found: ");
- i365_bclr (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
- } else {
- puts (" power not found: ");
- return -1;
- }
- }
-
- if (reg != i365_get (s, I365_POWER)) {
- reg = (I365_PWR_OUT | I365_PWR_NORESET | I365_VCC_5V | I365_VPP1_5V);
- i365_set (s, I365_POWER, reg);
- }
-
- return 0;
-}
-
-/*======================================================================
-
- Generic routines to get and set controller options
-
-======================================================================*/
-
-static void get_bridge_state (socket_info_t * s)
-{
- cirrus_get_state (s);
- cb_get_state (s);
-}
-
-static void set_bridge_state (socket_info_t * s)
-{
- cb_set_state (s);
- i365_set (s, I365_GBLCTL, 0x00);
- i365_set (s, I365_GENCTL, 0x00);
- cirrus_set_state (s);
-}
-
-static void set_bridge_opts (socket_info_t * s)
-{
- cirrus_set_opts (s);
- cb_set_opts (s);
-}
-
-/*====================================================================*/
-#define PD67_EXT_INDEX 0x2e /* Extension index */
-#define PD67_EXT_DATA 0x2f /* Extension data */
-#define PD67_EXD_VS1(s) (0x01 << ((s)<<1))
-
-#define pd67_ext_get(s, r) \
- (i365_set(s, PD67_EXT_INDEX, r), i365_get(s, PD67_EXT_DATA))
-
-static int i365_get_status (socket_info_t * s, u_int * value)
-{
- u_int status;
- u_char val;
- u_char power, vcc, vpp;
- u_int powerstate;
-
- status = i365_get (s, I365_IDENT);
- status = i365_get (s, I365_STATUS);
- *value = ((status & I365_CS_DETECT) == I365_CS_DETECT) ? SS_DETECT : 0;
- if (i365_get (s, I365_INTCTL) & I365_PC_IOCARD) {
- *value |= (status & I365_CS_STSCHG) ? 0 : SS_STSCHG;
- } else {
- *value |= (status & I365_CS_BVD1) ? 0 : SS_BATDEAD;
- *value |= (status & I365_CS_BVD2) ? 0 : SS_BATWARN;
- }
- *value |= (status & I365_CS_WRPROT) ? SS_WRPROT : 0;
- *value |= (status & I365_CS_READY) ? SS_READY : 0;
- *value |= (status & I365_CS_POWERON) ? SS_POWERON : 0;
-
- /* Check for Cirrus CL-PD67xx chips */
- i365_set (s, PD67_CHIP_INFO, 0);
- val = i365_get (s, PD67_CHIP_INFO);
- s->type = -1;
- if ((val & PD67_INFO_CHIP_ID) == PD67_INFO_CHIP_ID) {
- val = i365_get (s, PD67_CHIP_INFO);
- if ((val & PD67_INFO_CHIP_ID) == 0) {
- s->type = (val & PD67_INFO_SLOTS) ? IS_PD672X : IS_PD6710;
- i365_set (s, PD67_EXT_INDEX, 0xe5);
- if (i365_get (s, PD67_EXT_INDEX) != 0xe5)
- s->type = IS_VT83C469;
- }
- } else {
- printf ("no Cirrus Chip found\n");
- *value = 0;
- return -1;
- }
-
- power = i365_get (s, I365_POWER);
- state.flags |= (power & I365_PWR_AUTO) ? SS_PWR_AUTO : 0;
- state.flags |= (power & I365_PWR_OUT) ? SS_OUTPUT_ENA : 0;
- vcc = power & I365_VCC_MASK;
- vpp = power & I365_VPP1_MASK;
- state.Vcc = state.Vpp = 0;
- if((vcc== 0) || (vpp == 0)) {
- /*
- * On the Cirrus we get the info which card voltage
- * we have in EXTERN DATA and write it to MISC_CTL1
- */
- powerstate = pd67_ext_get(s, PD67_EXTERN_DATA);
- if (powerstate & PD67_EXD_VS1(0)) {
- /* 5V Card */
- i365_bclr (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
- } else {
- /* 3.3V Card */
- i365_bset (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
- }
- i365_set (s, I365_POWER, (I365_PWR_OUT | I365_PWR_NORESET | I365_VCC_5V | I365_VPP1_5V));
- power = i365_get (s, I365_POWER);
- }
- if (power & I365_VCC_5V) {
- state.Vcc = (i365_get(s, PD67_MISC_CTL_1) & PD67_MC1_VCC_3V) ? 33 : 50;
- }
-
- if (power == I365_VPP1_12V)
- state.Vpp = 120;
-
- /* IO card, RESET flags, IO interrupt */
- power = i365_get (s, I365_INTCTL);
- state.flags |= (power & I365_PC_RESET) ? 0 : SS_RESET;
- if (power & I365_PC_IOCARD)
- state.flags |= SS_IOCARD;
- state.io_irq = power & I365_IRQ_MASK;
-
- /* Card status change mask */
- power = i365_get (s, I365_CSCINT);
- state.csc_mask = (power & I365_CSC_DETECT) ? SS_DETECT : 0;
- if (state.flags & SS_IOCARD)
- state.csc_mask |= (power & I365_CSC_STSCHG) ? SS_STSCHG : 0;
- else {
- state.csc_mask |= (power & I365_CSC_BVD1) ? SS_BATDEAD : 0;
- state.csc_mask |= (power & I365_CSC_BVD2) ? SS_BATWARN : 0;
- state.csc_mask |= (power & I365_CSC_READY) ? SS_READY : 0;
- }
- debug ("i82365: GetStatus(0) = flags %#3.3x, Vcc %d, Vpp %d, "
- "io_irq %d, csc_mask %#2.2x\n", state.flags,
- state.Vcc, state.Vpp, state.io_irq, state.csc_mask);
-
- return 0;
-} /* i365_get_status */
-
-static int i365_set_socket (socket_info_t * s, socket_state_t * state)
-{
- u_char reg;
-
- set_bridge_state (s);
-
- /* IO card, RESET flag */
- reg = 0;
- reg |= (state->flags & SS_RESET) ? 0 : I365_PC_RESET;
- reg |= (state->flags & SS_IOCARD) ? I365_PC_IOCARD : 0;
- i365_set (s, I365_INTCTL, reg);
-
- cb_set_power (s, state);
-
-#if 0
- /* Card status change interrupt mask */
- reg = s->cs_irq << 4;
- if (state->csc_mask & SS_DETECT)
- reg |= I365_CSC_DETECT;
- if (state->flags & SS_IOCARD) {
- if (state->csc_mask & SS_STSCHG)
- reg |= I365_CSC_STSCHG;
- } else {
- if (state->csc_mask & SS_BATDEAD)
- reg |= I365_CSC_BVD1;
- if (state->csc_mask & SS_BATWARN)
- reg |= I365_CSC_BVD2;
- if (state->csc_mask & SS_READY)
- reg |= I365_CSC_READY;
- }
- i365_set (s, I365_CSCINT, reg);
- i365_get (s, I365_CSC);
-#endif /* 0 */
-
- return 0;
-} /* i365_set_socket */
-
-/*====================================================================*/
-
-static int i365_set_mem_map (socket_info_t * s, struct pccard_mem_map *mem)
-{
- u_short base, i;
- u_char map;
-
- debug ("i82365: SetMemMap(%d, %#2.2x, %d ns, %#5.5lx-%#5.5lx, %#5.5x)\n",
- mem->map, mem->flags, mem->speed,
- mem->sys_start, mem->sys_stop, mem->card_start);
-
- map = mem->map;
- if ((map > 4) ||
- (mem->card_start > 0x3ffffff) ||
- (mem->sys_start > mem->sys_stop) ||
- (mem->speed > 1000)) {
- return -1;
- }
-
- /* Turn off the window before changing anything */
- if (i365_get (s, I365_ADDRWIN) & I365_ENA_MEM (map))
- i365_bclr (s, I365_ADDRWIN, I365_ENA_MEM (map));
-
- /* Take care of high byte, for PCI controllers */
- i365_set (s, CB_MEM_PAGE (map), mem->sys_start >> 24);
-
- base = I365_MEM (map);
- i = (mem->sys_start >> 12) & 0x0fff;
- if (mem->flags & MAP_16BIT)
- i |= I365_MEM_16BIT;
- if (mem->flags & MAP_0WS)
- i |= I365_MEM_0WS;
- i365_set_pair (s, base + I365_W_START, i);
-
- i = (mem->sys_stop >> 12) & 0x0fff;
- switch (mem->speed / CYCLE_TIME) {
- case 0:
- break;
- case 1:
- i |= I365_MEM_WS0;
- break;
- case 2:
- i |= I365_MEM_WS1;
- break;
- default:
- i |= I365_MEM_WS1 | I365_MEM_WS0;
- break;
- }
- i365_set_pair (s, base + I365_W_STOP, i);
-
- i = 0;
- if (mem->flags & MAP_WRPROT)
- i |= I365_MEM_WRPROT;
- if (mem->flags & MAP_ATTRIB)
- i |= I365_MEM_REG;
- i365_set_pair (s, base + I365_W_OFF, i);
-
- /* set System Memory map Upper Adress */
- i365_set(s, PD67_EXT_INDEX, PD67_MEM_PAGE(map));
- i365_set(s, PD67_EXT_DATA, ((mem->sys_start >> 24) & 0xff));
-
- /* Turn on the window if necessary */
- if (mem->flags & MAP_ACTIVE)
- i365_bset (s, I365_ADDRWIN, I365_ENA_MEM (map));
- return 0;
-} /* i365_set_mem_map */
-
-static int i365_set_io_map (socket_info_t * s, struct pccard_io_map *io)
-{
- u_char map, ioctl;
-
- map = io->map;
- /* comment out: comparison is always false due to limited range of data type */
- if ((map > 1) || /* (io->start > 0xffff) || (io->stop > 0xffff) || */
- (io->stop < io->start))
- return -1;
- /* Turn off the window before changing anything */
- if (i365_get (s, I365_ADDRWIN) & I365_ENA_IO (map))
- i365_bclr (s, I365_ADDRWIN, I365_ENA_IO (map));
- i365_set_pair (s, I365_IO (map) + I365_W_START, io->start);
- i365_set_pair (s, I365_IO (map) + I365_W_STOP, io->stop);
- ioctl = i365_get (s, I365_IOCTL) & ~I365_IOCTL_MASK (map);
- if (io->speed)
- ioctl |= I365_IOCTL_WAIT (map);
- if (io->flags & MAP_0WS)
- ioctl |= I365_IOCTL_0WS (map);
- if (io->flags & MAP_16BIT)
- ioctl |= I365_IOCTL_16BIT (map);
- if (io->flags & MAP_AUTOSZ)
- ioctl |= I365_IOCTL_IOCS16 (map);
- i365_set (s, I365_IOCTL, ioctl);
- /* Turn on the window if necessary */
- if (io->flags & MAP_ACTIVE)
- i365_bset (s, I365_ADDRWIN, I365_ENA_IO (map));
- return 0;
-} /* i365_set_io_map */
-
-/*====================================================================*/
-
-/*
- * PCI_ADDR = (HOST_ADDR - 0xfe000000)
- * see MPC 8245 Users Manual Adress Map B
- */
-#define HOST_TO_PCI(addr) ((addr) - 0xfe000000)
-#define PCI_TO_HOST(addr) ((addr) + 0xfe000000)
-
-static int i82365_init (void)
-{
- u_int val;
- int i;
-
- if ((socket.dev = pci_find_devices (supported, 0)) < 0) {
- /* Controller not found */
- printf ("No PD67290 device found !!\n");
- return 1;
- }
- debug ("i82365 Device Found!\n");
-
- socket.cb_phys = PCMCIA_IO_BASE;
-
- /* set base address */
- pci_write_config_dword (socket.dev, PCI_BASE_ADDRESS_0,
- HOST_TO_PCI(socket.cb_phys));
-
- /* enable mapped memory and IO addresses */
- pci_write_config_dword (socket.dev,
- PCI_COMMAND,
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_IO | PCI_COMMAND_WAIT);
-
- get_bridge_state (&socket);
- set_bridge_opts (&socket);
-
- i = i365_get_status (&socket, &val);
-
- if (i > -1) {
- puts (pcic[socket.type].name);
- } else {
- printf ("i82365: Controller not found.\n");
- return 1;
- }
- if((val & SS_DETECT) != SS_DETECT){
- puts ("No card\n");
- return 1;
- }
-
- state.flags |= SS_OUTPUT_ENA;
-
- i365_set_socket (&socket, &state);
-
- for (i = 500; i; i--) {
- if ((i365_get (&socket, I365_STATUS) & I365_CS_READY))
- break;
- udelay (1000);
- }
-
- if (i == 0) {
- /* PC Card not ready for data transfer */
- puts ("i82365 PC Card not ready for data transfer\n");
- return 1;
- }
- debug (" PC Card ready for data transfer: ");
-
- mem.map = 0;
- mem.flags = MAP_ATTRIB | MAP_ACTIVE;
- mem.speed = 300;
- mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR;
- mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE - 1;
- mem.card_start = 0;
- i365_set_mem_map (&socket, &mem);
-
- mem.map = 1;
- mem.flags = MAP_ACTIVE;
- mem.speed = 300;
- mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE;
- mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + (2 * CONFIG_SYS_PCMCIA_MEM_SIZE) - 1;
- mem.card_start = 0;
- i365_set_mem_map (&socket, &mem);
-
-#ifdef DEBUG
- i82365_dump_regions (socket.dev);
-#endif
-
- return 0;
-}
-
-static void i82365_exit (void)
-{
- io.map = 0;
- io.flags = 0;
- io.speed = 0;
- io.start = 0;
- io.stop = 0x1;
-
- i365_set_io_map (&socket, &io);
-
- mem.map = 0;
- mem.flags = 0;
- mem.speed = 0;
- mem.sys_start = 0;
- mem.sys_stop = 0x1000;
- mem.card_start = 0;
-
- i365_set_mem_map (&socket, &mem);
-
- mem.map = 1;
- mem.flags = 0;
- mem.speed = 0;
- mem.sys_start = 0;
- mem.sys_stop = 0x1000;
- mem.card_start = 0;
-
- i365_set_mem_map (&socket, &mem);
-
- state.Vcc = state.Vpp = 0;
-
- i365_set_socket (&socket, &state);
-}
-
-int pcmcia_on (void)
-{
- u_int rc;
-
- debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
-
- rc = i82365_init();
- if (rc)
- goto exit;
-
- rc = check_ide_device(0);
- if (rc == 0)
- goto exit;
-
- i82365_exit();
-
-exit:
- return rc;
-}
-
-#if defined(CONFIG_CMD_PCMCIA)
-int pcmcia_off (void)
-{
- printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
-
- i82365_exit();
-
- return 0;
-}
-#endif
-
-/*======================================================================
-
- Debug stuff
-
-======================================================================*/
-
-#ifdef DEBUG
-static void i82365_dump_regions (pci_dev_t dev)
-{
- u_int tmp[2];
- u_int *mem = (void *) socket.cb_phys;
- u_char *cis = (void *) CONFIG_SYS_PCMCIA_MEM_ADDR;
- u_char *ide = (void *) (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_REG_OFFSET);
-
- pci_read_config_dword (dev, 0x00, tmp + 0);
- pci_read_config_dword (dev, 0x80, tmp + 1);
-
- printf ("PCI CONF: %08X ... %08X\n",
- tmp[0], tmp[1]);
- printf ("PCI MEM: ... %08X ... %08X\n",
- mem[0x8 / 4], mem[0x800 / 4]);
- printf ("CIS: ...%c%c%c%c%c%c%c%c...\n",
- cis[0x38], cis[0x3a], cis[0x3c], cis[0x3e],
- cis[0x40], cis[0x42], cis[0x44], cis[0x48]);
- printf ("CIS CONF: %02X %02X %02X ...\n",
- cis[0x200], cis[0x202], cis[0x204]);
- printf ("IDE: %02X %02X %02X %02X %02X %02X %02X %02X\n",
- ide[0], ide[1], ide[2], ide[3],
- ide[4], ide[5], ide[6], ide[7]);
-}
-#endif /* DEBUG */
-
-#endif /* CONFIG_I82365 */
diff --git a/board/cpc45/plx9030.c b/board/cpc45/plx9030.c
deleted file mode 100644
index 06fb8d6..0000000
--- a/board/cpc45/plx9030.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/* Plx9030.c - system configuration module for PLX9030 PCI to Local Bus Bridge */
-/*
- * (C) Copyright 2002-2003
- * Josef Wagner, MicroSys GmbH, wagner@microsys.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- * Date Modification by
- * ------- ---------------------------------------------- ---
- * 30sep02 converted from VxWorks to LINUX wa
-*/
-
-
-/*
-DESCRIPTION
-
-This is the configuration module for the PLX9030 PCI to Local Bus Bridge.
-It configures the Chip select lines for SRAM (CS0), ST16C552 (CS1,CS2), Display and local
-registers (CS3) on CPC45.
-*/
-
-/* includes */
-
-#include <common.h>
-#include <malloc.h>
-#include <net.h>
-#include <asm/io.h>
-#include <pci.h>
-
-/* imports */
-
-
-/* defines */
-#define PLX9030_VENDOR_ID 0x10B5
-#define PLX9030_DEVICE_ID 0x9030
-
-#undef PLX_DEBUG
-
-/* PLX9030 register offsets */
-#define P9030_LAS0RR 0x00
-#define P9030_LAS1RR 0x04
-#define P9030_LAS2RR 0x08
-#define P9030_LAS3RR 0x0c
-#define P9030_EROMRR 0x10
-#define P9030_LAS0BA 0x14
-#define P9030_LAS1BA 0x18
-#define P9030_LAS2BA 0x1c
-#define P9030_LAS3BA 0x20
-#define P9030_EROMBA 0x24
-#define P9030_LAS0BRD 0x28
-#define P9030_LAS1BRD 0x2c
-#define P9030_LAS2BRD 0x30
-#define P9030_LAS3BRD 0x34
-#define P9030_EROMBRD 0x38
-#define P9030_CS0BASE 0x3C
-#define P9030_CS1BASE 0x40
-#define P9030_CS2BASE 0x44
-#define P9030_CS3BASE 0x48
-#define P9030_INTCSR 0x4c
-#define P9030_CNTRL 0x50
-#define P9030_GPIOC 0x54
-
-/* typedefs */
-
-
-/* locals */
-
-static struct pci_device_id supported[] = {
- { PLX9030_VENDOR_ID, PLX9030_DEVICE_ID },
- { }
-};
-
-/* forward declarations */
-void sysOutLong(ulong address, ulong value);
-
-
-/***************************************************************************
-*
-* Plx9030Init - init CS0..CS3 for CPC45
-*
-*
-* RETURNS: N/A
-*/
-
-void Plx9030Init (void)
-{
- pci_dev_t devno;
- ulong membaseCsr; /* base address of device memory space */
- int idx = 0; /* general index */
-
-
- /* find plx9030 device */
-
- if ((devno = pci_find_devices(supported, idx++)) < 0)
- {
- printf("No PLX9030 device found !!\n");
- return;
- }
-
-
-#ifdef PLX_DEBUG
- printf("PLX 9030 device found ! devno = 0x%x\n",devno);
-#endif
-
- membaseCsr = PCI_PLX9030_MEMADDR;
-
- /* set base address */
- pci_write_config_dword(devno, PCI_BASE_ADDRESS_0, membaseCsr);
-
- /* enable mapped memory and IO addresses */
- pci_write_config_dword(devno,
- PCI_COMMAND,
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER);
-
-
- /* configure GBIOC */
- sysOutLong((membaseCsr + P9030_GPIOC), 0x00000FC0); /* CS2/CS3 enable */
-
- /* configure CS0 (SRAM) */
- sysOutLong((membaseCsr + P9030_LAS0BA), 0x00000001); /* enable space base */
- sysOutLong((membaseCsr + P9030_LAS0RR), 0x0FE00000); /* 2 MByte */
- sysOutLong((membaseCsr + P9030_LAS0BRD), 0x51928900); /* 4 wait states */
- sysOutLong((membaseCsr + P9030_CS0BASE), 0x00100001); /* enable 2 MByte */
- /* remap CS0 (SRAM) */
- pci_write_config_dword(devno, PCI_BASE_ADDRESS_2, SRAM_BASE);
-
- /* configure CS1 (ST16552 / CHAN A) */
- sysOutLong((membaseCsr + P9030_LAS1BA), 0x00400001); /* enable space base */
- sysOutLong((membaseCsr + P9030_LAS1RR), 0x0FFFFF00); /* 256 byte */
- sysOutLong((membaseCsr + P9030_LAS1BRD), 0x55122900); /* 4 wait states */
- sysOutLong((membaseCsr + P9030_CS1BASE), 0x00400081); /* enable 256 Byte */
- /* remap CS1 (ST16552 / CHAN A) */
- /* remap CS1 (ST16552 / CHAN A) */
- pci_write_config_dword(devno, PCI_BASE_ADDRESS_3, ST16552_A_BASE);
-
- /* configure CS2 (ST16552 / CHAN B) */
- sysOutLong((membaseCsr + P9030_LAS2BA), 0x00800001); /* enable space base */
- sysOutLong((membaseCsr + P9030_LAS2RR), 0x0FFFFF00); /* 256 byte */
- sysOutLong((membaseCsr + P9030_LAS2BRD), 0x55122900); /* 4 wait states */
- sysOutLong((membaseCsr + P9030_CS2BASE), 0x00800081); /* enable 256 Byte */
- /* remap CS2 (ST16552 / CHAN B) */
- pci_write_config_dword(devno, PCI_BASE_ADDRESS_4, ST16552_B_BASE);
-
- /* configure CS3 (BCSR) */
- sysOutLong((membaseCsr + P9030_LAS3BA), 0x00C00001); /* enable space base */
- sysOutLong((membaseCsr + P9030_LAS3RR), 0x0FFFFF00); /* 256 byte */
- sysOutLong((membaseCsr + P9030_LAS3BRD), 0x55357A80); /* 9 wait states */
- sysOutLong((membaseCsr + P9030_CS3BASE), 0x00C00081); /* enable 256 Byte */
- /* remap CS3 (DISPLAY and BCSR) */
- pci_write_config_dword(devno, PCI_BASE_ADDRESS_5, BCSR_BASE);
-}
-
-void sysOutLong(ulong address, ulong value)
-{
- *(ulong*)address = cpu_to_le32(value);
-}
diff --git a/board/cu824/Kconfig b/board/cu824/Kconfig
deleted file mode 100644
index 7927b05..0000000
--- a/board/cu824/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_CU824
-
-config SYS_BOARD
- default "cu824"
-
-config SYS_CONFIG_NAME
- default "CU824"
-
-endif
diff --git a/board/cu824/MAINTAINERS b/board/cu824/MAINTAINERS
deleted file mode 100644
index b1b7190..0000000
--- a/board/cu824/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-CU824 BOARD
-M: Wolfgang Denk <wd@denx.de>
-S: Maintained
-F: board/cu824/
-F: include/configs/CU824.h
-F: configs/CU824_defconfig
diff --git a/board/cu824/Makefile b/board/cu824/Makefile
deleted file mode 100644
index e7bd7ca..0000000
--- a/board/cu824/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = cu824.o flash.o
diff --git a/board/cu824/README b/board/cu824/README
deleted file mode 100644
index cc0d207..0000000
--- a/board/cu824/README
+++ /dev/null
@@ -1,453 +0,0 @@
-ppcboot for a CU824 board
----------------------------
-
-CU824 has two banks of flash 8MB each. In board's notation, bank 0 is
-the one at the address of 0xFF800000 and bank 1 is the one at the
-address of 0xFF000000. On power-up the processor jumps to the address
-of 0xFFF00100, the last megabyte of the bank 0 of flash. Thus,
-U-Boot is configured to reside in flash starting at the address of
-0xFFF00000. The environment space is not embedded in the U-Boot code
-and is located in flash separately from U-Boot, at the address of
-0xFF008000.
-
-
-U-Boot test results
---------------------
-
-x.x Operation on all available serial consoles
-
-x.x.x CONFIG_CONS_INDEX 1
-
-
-ppcboot 0.9.2 (May 13 2001 - 17:56:46)
-
-Initializing...
- CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache
- Board: CU824 Revision 1 Local Bus at 99 MHz
- DRAM: 64 MB
- FLASH: 16 MB
- In: serial
- Out: serial
- Err: serial
-
-Hit any key to stop autoboot: 0
-=>
-=>he
-go - start application at address 'addr'
-run - run commands in an environment variable
-bootm - boot application image from memory
-bootp - boot image via network using BootP/TFTP protocol
-tftpboot- boot image via network using TFTP protocol
- and env variables ipaddr and serverip
-rarpboot- boot image via network using RARP/TFTP protocol
-bootd - boot default, i.e., run 'bootcmd'
-loads - load S-Record file over serial line
-loadb - load binary file over serial line (kermit mode)
-md - memory display
-mm - memory modify (auto-incrementing)
-nm - memory modify (constant address)
-mw - memory write (fill)
-cp - memory copy
-cmp - memory compare
-crc32 - checksum calculation
-base - print or set address offset
-printenv- print environment variables
-setenv - set environment variables
-saveenv - save environment variables to persistent storage
-protect - enable or disable FLASH write protection
-erase - erase FLASH memory
-flinfo - print FLASH memory information
-bdinfo - print Board Info structure
-iminfo - print header information for application image
-coninfo - print console devices and informations
-loop - infinite loop on address range
-mtest - simple RAM test
-icache - enable or disable instruction cache
-dcache - enable or disable data cache
-reset - Perform RESET of the CPU
-echo - echo args to console
-version - print monitor version
-help - print online help
-? - alias for 'help'
-=>
-
-
-x.x.x CONFIG_CONS_INDEX 2
-
-**** NOT TESTED ****
-
-x.x Flash Driver Operation
-
-x.x.x Erase Operation
-
-
-ppcboot 0.9.2 (May 13 2001 - 17:56:46)
-
-Initializing...
- CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache
- Board: CU824 Revision 1 Local Bus at 99 MHz
- DRAM: 64 MB
- FLASH: 16 MB
- In: serial
- Out: serial
- Err: serial
-
-Hit any key to stop autoboot: 0
-=>
-=>
-=>
-=>md ff000000
-ff000000: 27051956 70706362 6f6f7420 302e382e '..Vppcboot 0.8.
-ff000010: 3320284d 61792031 31203230 3031202d 3 (May 11 2001 -
-ff000020: 2031343a 35373a30 33290000 00000000 14:57:03)......
-ff000030: 00000000 00000000 00000000 00000000 ................
-ff000040: 00000000 00000000 00000000 00000000 ................
-ff000050: 00000000 00000000 00000000 00000000 ................
-ff000060: 00000000 00000000 00000000 00000000 ................
-ff000070: 00000000 00000000 00000000 00000000 ................
-ff000080: 00000000 00000000 00000000 00000000 ................
-ff000090: 00000000 00000000 00000000 00000000 ................
-ff0000a0: 00000000 00000000 00000000 00000000 ................
-ff0000b0: 00000000 00000000 00000000 00000000 ................
-ff0000c0: 00000000 00000000 00000000 00000000 ................
-ff0000d0: 00000000 00000000 00000000 00000000 ................
-ff0000e0: 00000000 00000000 00000000 00000000 ................
-ff0000f0: 00000000 00000000 00000000 00000000 ................
-=>erase ff000000 ff007fff
-Erase Flash from 0xff000000 to 0xff007fff
- done
-Erased 1 sectors
-=>md ff000000
-ff000000: ffffffff ffffffff ffffffff ffffffff ................
-ff000010: ffffffff ffffffff ffffffff ffffffff ................
-ff000020: ffffffff ffffffff ffffffff ffffffff ................
-ff000030: ffffffff ffffffff ffffffff ffffffff ................
-ff000040: ffffffff ffffffff ffffffff ffffffff ................
-ff000050: ffffffff ffffffff ffffffff ffffffff ................
-ff000060: ffffffff ffffffff ffffffff ffffffff ................
-ff000070: ffffffff ffffffff ffffffff ffffffff ................
-ff000080: ffffffff ffffffff ffffffff ffffffff ................
-ff000090: ffffffff ffffffff ffffffff ffffffff ................
-ff0000a0: ffffffff ffffffff ffffffff ffffffff ................
-ff0000b0: ffffffff ffffffff ffffffff ffffffff ................
-ff0000c0: ffffffff ffffffff ffffffff ffffffff ................
-ff0000d0: ffffffff ffffffff ffffffff ffffffff ................
-ff0000e0: ffffffff ffffffff ffffffff ffffffff ................
-ff0000f0: ffffffff ffffffff ffffffff ffffffff ................
-=>
-
-x.x.x Information
-
-
-ppcboot 0.9.2 (May 13 2001 - 17:56:46)
-
-Initializing...
- CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache
- Board: CU824 Revision 1 Local Bus at 99 MHz
- DRAM: 64 MB
- FLASH: 16 MB
- In: serial
- Out: serial
- Err: serial
-
-Hit any key to stop autoboot: 0
-=>
-=>
-=>
-=>
-=>flinfo
-
-Bank # 1: Intel: 28F160F3B (16Mbit)
- Size: 8 MB in 39 Sectors
- Sector Start Addresses:
- FF000000 FF008000 (RO) FF010000 FF018000 FF020000
- FF028000 FF030000 FF038000 FF040000 FF080000
- FF0C0000 FF100000 FF140000 FF180000 FF1C0000
- FF200000 FF240000 FF280000 FF2C0000 FF300000
- FF340000 FF380000 FF3C0000 FF400000 FF440000
- FF480000 FF4C0000 FF500000 FF540000 FF580000
- FF5C0000 FF600000 FF640000 FF680000 FF6C0000
- FF700000 FF740000 FF780000 FF7C0000
-
-Bank # 2: Intel: 28F160F3B (16Mbit)
- Size: 8 MB in 39 Sectors
- Sector Start Addresses:
- FF800000 FF808000 FF810000 FF818000 FF820000
- FF828000 FF830000 FF838000 FF840000 FF880000
- FF8C0000 FF900000 FF940000 FF980000 FF9C0000
- FFA00000 FFA40000 FFA80000 FFAC0000 FFB00000
- FFB40000 FFB80000 FFBC0000 FFC00000 FFC40000
- FFC80000 FFCC0000 FFD00000 FFD40000 FFD80000
- FFDC0000 FFE00000 FFE40000 FFE80000 FFEC0000
- FFF00000 (RO) FFF40000 FFF80000 FFFC0000
-=>
-
-x.x.x Flash Programming
-
-
-ppcboot 0.9.2 (May 13 2001 - 17:56:46)
-
-Initializing...
- CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache
- Board: CU824 Revision 1 Local Bus at 99 MHz
- DRAM: 64 MB
- FLASH: 16 MB
- In: serial
- Out: serial
- Err: serial
-
-Hit any key to stop autoboot: 0
-=>
-=>
-=>
-=>
-=>cp 0 ff000000 20
-Copy to Flash... done
-=>md 0
-00000000: 0ec08ce0 03f9800c 00000001 040c0000 ................
-00000010: 00000001 03fd1aa0 03fd1ae4 03fd1a00 ................
-00000020: 03fd1a58 03fceb04 03fd34cc 03fd34d0 ...X......4...4.
-00000030: 03fcd5bc 03fcdabc 00000000 00000000 ................
-00000040: 00000000 00000000 00000000 00000000 ................
-00000050: 00000000 00000000 00000000 00000000 ................
-00000060: 00000000 00000000 00000000 00000000 ................
-00000070: 00000000 00000000 00000000 00000000 ................
-00000080: 00000000 00000000 00000000 00000000 ................
-00000090: 00000000 00000000 00000000 00000000 ................
-000000a0: 00000000 00000000 00000000 00000000 ................
-000000b0: 00000000 00000000 00000000 00000000 ................
-000000c0: 00000000 00000000 00000000 00000000 ................
-000000d0: 00000000 00000000 00000000 00000000 ................
-000000e0: 00000000 00000000 00000000 00000000 ................
-000000f0: 00000000 00000000 00000000 00000000 ................
-=>md ff000000
-ff000000: 0ec08ce0 03f9800c 00000001 040c0000 ................
-ff000010: 00000001 03fd1aa0 03fd1ae4 03fd1a00 ................
-ff000020: 03fd1a58 03fceb04 03fd34cc 03fd34d0 ...X......4...4.
-ff000030: 03fcd5bc 03fcdabc 00000000 00000000 ................
-ff000040: 00000000 00000000 00000000 00000000 ................
-ff000050: 00000000 00000000 00000000 00000000 ................
-ff000060: 00000000 00000000 00000000 00000000 ................
-ff000070: 00000000 00000000 00000000 00000000 ................
-ff000080: ffffffff ffffffff ffffffff ffffffff ................
-ff000090: ffffffff ffffffff ffffffff ffffffff ................
-ff0000a0: ffffffff ffffffff ffffffff ffffffff ................
-ff0000b0: ffffffff ffffffff ffffffff ffffffff ................
-ff0000c0: ffffffff ffffffff ffffffff ffffffff ................
-ff0000d0: ffffffff ffffffff ffffffff ffffffff ................
-ff0000e0: ffffffff ffffffff ffffffff ffffffff ................
-ff0000f0: ffffffff ffffffff ffffffff ffffffff ................
-=>
-
-x.x.x Storage of environment variables in flash
-
-
-ppcboot 0.9.2 (May 13 2001 - 17:56:46)
-
-Initializing...
- CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache
- Board: CU824 Revision 1 Local Bus at 99 MHz
- DRAM: 64 MB
- FLASH: 16 MB
- In: serial
- Out: serial
- Err: serial
-
-Hit any key to stop autoboot: 0
-=>
-=>printenv
-bootargs=
-bootcmd=bootm FE020000
-bootdelay=5
-baudrate=9600
-ipaddr=192.168.4.2
-serverip=192.168.4.1
-ethaddr=00:40:42:01:00:a0
-stdin=serial
-stdout=serial
-stderr=serial
-
-Environment size: 167/32764 bytes
-=>setenv myvar 1234
-=>save_env
-Un-Protected 1 sectors
-Erasing Flash...
- done
-Erased 1 sectors
-Saving Environment to Flash...
-Protected 1 sectors
-=>reset
-
-
-ppcboot 0.9.2 (May 13 2001 - 17:56:46)
-
-Initializing...
- CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache
- Board: CU824 Revision 1 Local Bus at 99 MHz
- DRAM: 64 MB
- FLASH: 16 MB
- In: serial
- Out: serial
- Err: serial
-
-Hit any key to stop autoboot: 0
-=>
-=>printenv
-bootargs=
-bootcmd=bootm FE020000
-bootdelay=5
-baudrate=9600
-ipaddr=192.168.4.2
-serverip=192.168.4.1
-ethaddr=00:40:42:01:00:a0
-myvar=1234
-stdin=serial
-stdout=serial
-stderr=serial
-
-Environment size: 178/32764 bytes
-=>
-
-x.x Image Download and run over serial port
-
-
-ppcboot 0.9.2 (May 13 2001 - 17:56:46)
-
-Initializing...
- CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache
- Board: CU824 Revision 1 Local Bus at 99 MHz
- DRAM: 64 MB
- FLASH: 16 MB
- In: serial
- Out: serial
- Err: serial
-
-Hit any key to stop autoboot: 0
-=>
-=>
-=>mw 40000 0 10000
-=>md 40000
-00040000: 00000000 00000000 00000000 00000000 ................
-00040010: 00000000 00000000 00000000 00000000 ................
-00040020: 00000000 00000000 00000000 00000000 ................
-00040030: 00000000 00000000 00000000 00000000 ................
-00040040: 00000000 00000000 00000000 00000000 ................
-00040050: 00000000 00000000 00000000 00000000 ................
-00040060: 00000000 00000000 00000000 00000000 ................
-00040070: 00000000 00000000 00000000 00000000 ................
-00040080: 00000000 00000000 00000000 00000000 ................
-00040090: 00000000 00000000 00000000 00000000 ................
-000400a0: 00000000 00000000 00000000 00000000 ................
-000400b0: 00000000 00000000 00000000 00000000 ................
-000400c0: 00000000 00000000 00000000 00000000 ................
-000400d0: 00000000 00000000 00000000 00000000 ................
-000400e0: 00000000 00000000 00000000 00000000 ................
-000400f0: 00000000 00000000 00000000 00000000 ................
-=>loads
-## Ready for S-Record download ...
-
-(Back at xpert.denx.de)
-[vlad@xpert vlad]$ cat hello_world.srec >/dev/ttyS0
-[vlad@xpert vlad]$ kermit -l /dev/ttyS0 -b 9600 -c
-Connecting to /dev/ttyS0, speed 9600.
-The escape character is Ctrl-\ (ASCII 28, FS)
-Type the escape character followed by C to get back,
-or followed by ? to see other options.
-md 40000
-00040000: 00018148 9421ffe0 7c0802a6 bf61000c ...H.!..|....a..
-00040010: 90010024 48000005 7fc802a6 801effe8 ...$H...........
-00040020: 7fc0f214 7c7f1b78 813f0038 7c9c2378 ....|..x.?.8|.#x
-00040030: 807e8000 7cbd2b78 80090010 3b600000 .~..|.+x....;`..
-00040040: 7c0803a6 4e800021 813f0038 7f84e378 |...N..!.?.8...x
-00040050: 807e8004 80090010 7c0803a6 4e800021 .~......|...N..!
-00040060: 7c1be000 4181003c 80bd0000 813f0038 |...A..<.....?.8
-00040070: 3bbd0004 2c050000 40820008 80be8008 ;...,...@.......
-00040080: 80090010 7f64db78 807e800c 3b7b0001 .....d.x.~..;{..
-00040090: 7c0803a6 4e800021 7c1be000 4081ffcc |...N..!|...@...
-000400a0: 813f0038 807e8010 80090010 7c0803a6 .?.8.~......|...
-000400b0: 4e800021 813f0038 80090004 7c0803a6 N..!.?.8....|...
-000400c0: 4e800021 2c030000 4182ffec 813f0038 N..!,...A....?.8
-000400d0: 80090000 7c0803a6 4e800021 813f0038 ....|...N..!.?.8
-000400e0: 807e8014 80090010 7c0803a6 4e800021 .~......|...N..!
-000400f0: 38600000 80010024 7c0803a6 bb61000c 8`.....$|....a..
-=>go 40004
-## Starting application at 0x00040004 ...
-Hello World
-argc = 1
-argv[0] = "40004"
-argv[1] = "<NULL>"
-Hit any key to exit ...
-
-## Application terminated, rc = 0x0
-=>
-
-x.x Image download and run over ethernet interface
-
-
-ppcboot 0.9.2 (May 13 2001 - 17:56:46)
-
-Initializing...
- CPU: MPC8240 Revsion 1.1 at 247 MHz: 16 kB I-Cache 16 kB D-Cache
- Board: CU824 Revision 1 Local Bus at 99 MHz
- DRAM: 64 MB
- FLASH: 16 MB
- In: serial
- Out: serial
- Err: serial
-
-Hit any key to stop autoboot: 0
-=>
-=>
-=>mw 40000 0 10000
-=>md 40000
-00040000: 00000000 00000000 00000000 00000000 ................
-00040010: 00000000 00000000 00000000 00000000 ................
-00040020: 00000000 00000000 00000000 00000000 ................
-00040030: 00000000 00000000 00000000 00000000 ................
-00040040: 00000000 00000000 00000000 00000000 ................
-00040050: 00000000 00000000 00000000 00000000 ................
-00040060: 00000000 00000000 00000000 00000000 ................
-00040070: 00000000 00000000 00000000 00000000 ................
-00040080: 00000000 00000000 00000000 00000000 ................
-00040090: 00000000 00000000 00000000 00000000 ................
-000400a0: 00000000 00000000 00000000 00000000 ................
-000400b0: 00000000 00000000 00000000 00000000 ................
-000400c0: 00000000 00000000 00000000 00000000 ................
-000400d0: 00000000 00000000 00000000 00000000 ................
-000400e0: 00000000 00000000 00000000 00000000 ................
-000400f0: 00000000 00000000 00000000 00000000 ................
-=>tftpboot 40000 hello_world.bin
-ARP broadcast 1
-TFTP from server 192.168.4.1; our IP address is 192.168.4.2
-Filename 'hello_world.bin'.
-Load address: 0x40000
-Loading: #############
-done
-Bytes transferred = 65912 (10178 hex)
-=>md 40000
-00040000: 00018148 9421ffe0 7c0802a6 bf61000c ...H.!..|....a..
-00040010: 90010024 48000005 7fc802a6 801effe8 ...$H...........
-00040020: 7fc0f214 7c7f1b78 813f0038 7c9c2378 ....|..x.?.8|.#x
-00040030: 807e8000 7cbd2b78 80090010 3b600000 .~..|.+x....;`..
-00040040: 7c0803a6 4e800021 813f0038 7f84e378 |...N..!.?.8...x
-00040050: 807e8004 80090010 7c0803a6 4e800021 .~......|...N..!
-00040060: 7c1be000 4181003c 80bd0000 813f0038 |...A..<.....?.8
-00040070: 3bbd0004 2c050000 40820008 80be8008 ;...,...@.......
-00040080: 80090010 7f64db78 807e800c 3b7b0001 .....d.x.~..;{..
-00040090: 7c0803a6 4e800021 7c1be000 4081ffcc |...N..!|...@...
-000400a0: 813f0038 807e8010 80090010 7c0803a6 .?.8.~......|...
-000400b0: 4e800021 813f0038 80090004 7c0803a6 N..!.?.8....|...
-000400c0: 4e800021 2c030000 4182ffec 813f0038 N..!,...A....?.8
-000400d0: 80090000 7c0803a6 4e800021 813f0038 ....|...N..!.?.8
-000400e0: 807e8014 80090010 7c0803a6 4e800021 .~......|...N..!
-000400f0: 38600000 80010024 7c0803a6 bb61000c 8`.....$|....a..
-=>go 40004
-## Starting application at 0x00040004 ...
-Hello World
-argc = 1
-argv[0] = "40004"
-argv[1] = "<NULL>"
-Hit any key to exit ...
-
-## Application terminated, rc = 0x0
-=>
diff --git a/board/cu824/cu824.c b/board/cu824/cu824.c
deleted file mode 100644
index 6b23c53..0000000
--- a/board/cu824/cu824.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * (C) Copyright 2001
- * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
- *
- * (C) Copyright 2001-2006
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
-
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-#include <pci.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define BOARD_REV_REG 0xFE80002B
-
-int checkboard (void)
-{
- char revision = *(volatile char *)(BOARD_REV_REG);
- char buf[32];
-
- puts ("Board: CU824 ");
- printf("Revision %d ", revision);
- printf("Local Bus at %s MHz\n", strmhz(buf, gd->bus_clk));
-
- return 0;
-}
-
-phys_size_t initdram(int board_type)
-{
- long size;
- long new_bank0_end;
- long mear1;
- long emear1;
-
- size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
-
- new_bank0_end = size - 1;
- mear1 = mpc824x_mpc107_getreg(MEAR1);
- emear1 = mpc824x_mpc107_getreg(EMEAR1);
- mear1 = (mear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
- emear1 = (emear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
- mpc824x_mpc107_setreg(MEAR1, mear1);
- mpc824x_mpc107_setreg(EMEAR1, emear1);
-
- return (size);
-}
-
-/*
- * Initialize PCI Devices, report devices found.
- */
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_sandpoint_config_table[] = {
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
-
- { }
-};
-#endif
-
-struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
- config_table: pci_sandpoint_config_table,
-#endif
-};
-
-void pci_init_board(void)
-{
- pci_mpc824x_init(&hose);
-}
-
-int board_eth_init(bd_t *bis)
-{
- return pci_eth_init(bis);
-}
diff --git a/board/cu824/flash.c b/board/cu824/flash.c
deleted file mode 100644
index 3a6d954..0000000
--- a/board/cu824/flash.c
+++ /dev/null
@@ -1,470 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef CONFIG_ENV_SIZE
-# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef CONFIG_ENV_SECT_SIZE
-# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-# endif
-#endif
-
-#define FLASH_BANK_SIZE 0x800000
-#define MAIN_SECT_SIZE 0x40000
-#define PARAM_SECT_SIZE 0x8000
-
-#define BOARD_CTRL_REG 0xFE800013
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-static int write_data (flash_info_t *info, ulong dest, ulong *data);
-static void write_via_fpu(vu_long *addr, ulong *data);
-static __inline__ unsigned long get_msr(void);
-static __inline__ void set_msr(unsigned long msr);
-
-/*---------------------------------------------------------------------*/
-#undef DEBUG_FLASH
-
-/*---------------------------------------------------------------------*/
-#ifdef DEBUG_FLASH
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-/*---------------------------------------------------------------------*/
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init(void)
-{
- int i, j;
- ulong size = 0;
- volatile unsigned char *bcr = (volatile unsigned char *)(BOARD_CTRL_REG);
-
- DEBUGF("Write protect was: 0x%02X\n", *bcr);
- *bcr &= 0x1; /* FWPT must be 0 */
- *bcr |= 0x6; /* FWP0 = FWP1 = 1 */
- DEBUGF("Write protect is: 0x%02X\n", *bcr);
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- vu_long *addr = (vu_long *)(CONFIG_SYS_FLASH_BASE + i * FLASH_BANK_SIZE);
-
- addr[0] = 0x00900090;
-
- DEBUGF ("Flash bank # %d:\n"
- "\tManuf. ID @ 0x%08lX: 0x%08lX\n"
- "\tDevice ID @ 0x%08lX: 0x%08lX\n",
- i,
- (ulong)(&addr[0]), addr[0],
- (ulong)(&addr[2]), addr[2]);
-
- if ((addr[0] == addr[1]) && (addr[0] == INTEL_MANUFACT) &&
- (addr[2] == addr[3]) && (addr[2] == INTEL_ID_28F160F3B))
- {
- flash_info[i].flash_id = (FLASH_MAN_INTEL & FLASH_VENDMASK) |
- (INTEL_ID_28F160F3B & FLASH_TYPEMASK);
- } else {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- addr[0] = 0xFFFFFFFF;
- goto Done;
- }
-
- DEBUGF ("flash_id = 0x%08lX\n", flash_info[i].flash_id);
-
- addr[0] = 0xFFFFFFFF;
-
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- for (j = 0; j < flash_info[i].sector_count; j++) {
- if (j <= 7) {
- flash_info[i].start[j] = CONFIG_SYS_FLASH_BASE +
- i * FLASH_BANK_SIZE +
- j * PARAM_SECT_SIZE;
- } else {
- flash_info[i].start[j] = CONFIG_SYS_FLASH_BASE +
- i * FLASH_BANK_SIZE +
- (j - 7)*MAIN_SECT_SIZE;
- }
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE + FLASH_BANK_SIZE
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[1]);
-#else
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-#endif
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
-#if CONFIG_ENV_ADDR >= CONFIG_SYS_FLASH_BASE + FLASH_BANK_SIZE
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
- &flash_info[1]);
-#else
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
- &flash_info[0]);
-#endif
-#endif
-
-Done:
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch ((i = info->flash_id & FLASH_VENDMASK)) {
- case (FLASH_MAN_INTEL & FLASH_VENDMASK):
- printf ("Intel: ");
- break;
- default:
- printf ("Unknown Vendor 0x%04x ", i);
- break;
- }
-
- switch ((i = info->flash_id & FLASH_TYPEMASK)) {
- case (INTEL_ID_28F160F3B & FLASH_TYPEMASK):
- printf ("28F160F3B (16Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type 0x%04x\n", i);
- goto Done;
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-
-Done:
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- int flag, prot, sect;
- ulong start, now, last;
-
- DEBUGF ("Erase flash bank %d sect %d ... %d\n",
- info - &flash_info[0], s_first, s_last);
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (FLASH_MAN_INTEL & FLASH_VENDMASK)) {
- printf ("Can erase only Intel flash types - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- start = get_timer (0);
- last = start;
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- vu_long *addr = (vu_long *)(info->start[sect]);
-
- DEBUGF ("Erase sect %d @ 0x%08lX\n",
- sect, (ulong)addr);
-
- /* Disable interrupts which might cause a timeout
- * here.
- */
- flag = disable_interrupts();
-
- addr[0] = 0x00500050; /* clear status register */
- addr[0] = 0x00200020; /* erase setup */
- addr[0] = 0x00D000D0; /* erase confirm */
-
- addr[1] = 0x00500050; /* clear status register */
- addr[1] = 0x00200020; /* erase setup */
- addr[1] = 0x00D000D0; /* erase confirm */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- while (((addr[0] & 0x00800080) != 0x00800080) ||
- ((addr[1] & 0x00800080) != 0x00800080) ) {
- if ((now=get_timer(start)) >
- CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- addr[0] = 0x00B000B0; /* suspend erase */
- addr[0] = 0x00FF00FF; /* to read mode */
- return 1;
- }
-
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
- addr[0] = 0x00FF00FF;
- }
- }
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-#define FLASH_WIDTH 8 /* flash bus width in bytes */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong wp, cp, msr;
- int l, rc, i;
- ulong data[2];
- ulong *datah = &data[0];
- ulong *datal = &data[1];
-
- DEBUGF ("Flash write_buff: @ 0x%08lx, src 0x%08lx len %ld\n",
- addr, (ulong)src, cnt);
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return 4;
- }
-
- msr = get_msr();
- set_msr(msr | MSR_FP);
-
- wp = (addr & ~(FLASH_WIDTH-1)); /* get lower aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- *datah = *datal = 0;
-
- for (i = 0, cp = wp; i < l; i++, cp++) {
- if (i >= 4) {
- *datah = (*datah << 8) |
- ((*datal & 0xFF000000) >> 24);
- }
-
- *datal = (*datal << 8) | (*(uchar *)cp);
- }
- for (; i < FLASH_WIDTH && cnt > 0; ++i) {
- char tmp;
-
- tmp = *src;
-
- src++;
-
- if (i >= 4) {
- *datah = (*datah << 8) |
- ((*datal & 0xFF000000) >> 24);
- }
-
- *datal = (*datal << 8) | tmp;
-
- --cnt; ++cp;
- }
-
- for (; cnt == 0 && i < FLASH_WIDTH; ++i, ++cp) {
- if (i >= 4) {
- *datah = (*datah << 8) |
- ((*datal & 0xFF000000) >> 24);
- }
-
- *datal = (*datah << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_data(info, wp, data)) != 0) {
- set_msr(msr);
- return (rc);
- }
-
- wp += FLASH_WIDTH;
- }
-
- /*
- * handle FLASH_WIDTH aligned part
- */
- while (cnt >= FLASH_WIDTH) {
- *datah = *(ulong *)src;
- *datal = *(ulong *)(src + 4);
- if ((rc = write_data(info, wp, data)) != 0) {
- set_msr(msr);
- return (rc);
- }
- wp += FLASH_WIDTH;
- cnt -= FLASH_WIDTH;
- src += FLASH_WIDTH;
- }
-
- if (cnt == 0) {
- set_msr(msr);
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- *datah = *datal = 0;
- for (i = 0, cp = wp; i < FLASH_WIDTH && cnt > 0; ++i, ++cp) {
- char tmp;
-
- tmp = *src;
-
- src++;
-
- if (i >= 4) {
- *datah = (*datah << 8) | ((*datal & 0xFF000000) >> 24);
- }
-
- *datal = (*datal << 8) | tmp;
-
- --cnt;
- }
-
- for (; i < FLASH_WIDTH; ++i, ++cp) {
- if (i >= 4) {
- *datah = (*datah << 8) | ((*datal & 0xFF000000) >> 24);
- }
-
- *datal = (*datal << 8) | (*(uchar *)cp);
- }
-
- rc = write_data(info, wp, data);
- set_msr(msr);
-
- return (rc);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t *info, ulong dest, ulong *data)
-{
- vu_long *addr = (vu_long *)dest;
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if (((addr[0] & data[0]) != data[0]) ||
- ((addr[1] & data[1]) != data[1]) ) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0] = 0x00400040; /* write setup */
- write_via_fpu(addr, data);
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer (0);
-
- while (((addr[0] & 0x00800080) != 0x00800080) ||
- ((addr[1] & 0x00800080) != 0x00800080) ) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- addr[0] = 0x00FF00FF; /* restore read mode */
- return (1);
- }
- }
-
- addr[0] = 0x00FF00FF; /* restore read mode */
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void write_via_fpu(vu_long *addr, ulong *data)
-{
- __asm__ __volatile__ ("lfd 1, 0(%0)" : : "r" (data));
- __asm__ __volatile__ ("stfd 1, 0(%0)" : : "r" (addr));
-}
-/*-----------------------------------------------------------------------
- */
-static __inline__ unsigned long get_msr(void)
-{
- unsigned long msr;
-
- __asm__ __volatile__ ("mfmsr %0" : "=r" (msr) :);
- return msr;
-}
-
-static __inline__ void set_msr(unsigned long msr)
-{
- __asm__ __volatile__ ("mtmsr %0" : : "r" (msr));
-}
diff --git a/board/eXalion/Kconfig b/board/eXalion/Kconfig
deleted file mode 100644
index a22f58a..0000000
--- a/board/eXalion/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_EXALION
-
-config SYS_BOARD
- default "eXalion"
-
-config SYS_CONFIG_NAME
- default "eXalion"
-
-endif
diff --git a/board/eXalion/MAINTAINERS b/board/eXalion/MAINTAINERS
deleted file mode 100644
index 0ea74ca..0000000
--- a/board/eXalion/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-EXALION BOARD
-M: Torsten Demke <torsten.demke@fci.com>
-S: Maintained
-F: board/eXalion/
-F: include/configs/eXalion.h
-F: configs/eXalion_defconfig
diff --git a/board/eXalion/Makefile b/board/eXalion/Makefile
deleted file mode 100644
index 9192e28..0000000
--- a/board/eXalion/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = eXalion.o
diff --git a/board/eXalion/eXalion.c b/board/eXalion/eXalion.c
deleted file mode 100644
index 304ff21..0000000
--- a/board/eXalion/eXalion.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * Torsten Demke, FORCE Computers GmbH. torsten.demke@fci.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <pci.h>
-#include <ide.h>
-#include <netdev.h>
-#include <timestamp.h>
-#include "piix_pci.h"
-#include "eXalion.h"
-
-int checkboard (void)
-{
- ulong busfreq = get_bus_freq (0);
- char buf[32];
-
- printf ("Board: eXalion MPC824x - CHRP (MAP B)\n");
- printf ("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
- printf ("Local Bus: %s MHz\n", strmhz (buf, busfreq));
-
- return 0;
-}
-
-int checkflash (void)
-{
- printf ("checkflash\n");
- flash_init ();
- return (0);
-}
-
-phys_size_t initdram (int board_type)
-{
- int i, cnt;
- volatile uchar *base = CONFIG_SYS_SDRAM_BASE;
- volatile ulong *addr;
- ulong save[32];
- ulong val, ret = 0;
-
- for (i = 0, cnt = (CONFIG_SYS_MAX_RAM_SIZE / sizeof (long)) >> 1; cnt > 0;
- cnt >>= 1) {
- addr = (volatile ulong *) base + cnt;
- save[i++] = *addr;
- *addr = ~cnt;
- }
-
- addr = (volatile ulong *) base;
- save[i] = *addr;
- *addr = 0;
-
- if (*addr != 0) {
- *addr = save[i];
- goto Done;
- }
-
- for (cnt = 1; cnt <= CONFIG_SYS_MAX_RAM_SIZE / sizeof (long); cnt <<= 1) {
- addr = (volatile ulong *) base + cnt;
- val = *addr;
- *addr = save[--i];
- if (val != ~cnt) {
- ulong new_bank0_end = cnt * sizeof (long) - 1;
- ulong mear1 = mpc824x_mpc107_getreg (MEAR1);
- ulong emear1 = mpc824x_mpc107_getreg (EMEAR1);
-
- mear1 = (mear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >>
- MICR_ADDR_SHIFT);
- emear1 = (emear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >>
- MICR_EADDR_SHIFT);
- mpc824x_mpc107_setreg (MEAR1, mear1);
- mpc824x_mpc107_setreg (EMEAR1, emear1);
-
- ret = cnt * sizeof (long);
- goto Done;
- }
- }
-
- ret = CONFIG_SYS_MAX_RAM_SIZE;
- Done:
- return ret;
-}
-
-int misc_init_r (void)
-{
- pci_dev_t bdf;
- u32 val32;
- u8 val8;
-
- puts ("ISA: ");
- bdf = pci_find_device (PIIX4_VENDOR_ID, PIIX4_ISA_DEV_ID, 0);
- if (bdf == -1) {
- puts ("Unable to find PIIX4 ISA bridge !\n");
- hang ();
- }
-
- /* set device for normal ISA instead EIO */
- pci_read_config_dword (bdf, PCI_CFG_PIIX4_GENCFG, &val32);
- val32 |= 0x00000001;
- pci_write_config_dword (bdf, PCI_CFG_PIIX4_GENCFG, val32);
- printf ("PIIX4 ISA bridge (%d,%d,%d)\n", PCI_BUS (bdf),
- PCI_DEV (bdf), PCI_FUNC (bdf));
-
- puts ("ISA: ");
- bdf = pci_find_device (PIIX4_VENDOR_ID, PIIX4_IDE_DEV_ID, 0);
- if (bdf == -1) {
- puts ("Unable to find PIIX4 IDE controller !\n");
- hang ();
- }
-
- /* Init BMIBA register */
- /* pci_read_config_dword(bdf, PCI_CFG_PIIX4_BMIBA, &val32); */
- /* val32 |= 0x1000; */
- /* pci_write_config_dword(bdf, PCI_CFG_PIIX4_BMIBA, val32); */
-
- /* Enable BUS master and IO access */
- val32 = PCI_COMMAND_MASTER | PCI_COMMAND_IO;
- pci_write_config_dword (bdf, PCI_COMMAND, val32);
-
- /* Set latency */
- pci_read_config_byte (bdf, PCI_LATENCY_TIMER, &val8);
- val8 = 0x40;
- pci_write_config_byte (bdf, PCI_LATENCY_TIMER, val8);
-
- /* Enable Primary ATA/IDE */
- pci_read_config_dword (bdf, PCI_CFG_PIIX4_IDETIM, &val32);
- /* val32 = 0xa307a307; */
- val32 = 0x00008000;
- pci_write_config_dword (bdf, PCI_CFG_PIIX4_IDETIM, val32);
-
-
- printf ("PIIX4 IDE controller (%d,%d,%d)\n", PCI_BUS (bdf),
- PCI_DEV (bdf), PCI_FUNC (bdf));
-
- /* Try to get FAT working... */
- /* fat_register_read(ide_read); */
-
-
- return (0);
-}
-
-/*
- * Show/Init PCI devices on the specified bus number.
- */
-
-void pci_eXalion_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
-{
- unsigned char line;
-
- switch (PCI_DEV (dev)) {
- case 16:
- line = PCI_INT_A;
- break;
- case 17:
- line = PCI_INT_B;
- break;
- case 18:
- line = PCI_INT_C;
- break;
- case 19:
- line = PCI_INT_D;
- break;
-#if defined (CONFIG_MPC8245)
- case 20:
- line = PCI_INT_A;
- break;
- case 21:
- line = PCI_INT_B;
- break;
- case 22:
- line = PCI_INT_NA;
- break;
-#endif
- default:
- line = PCI_INT_A;
- break;
- }
- pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE, line);
-}
-
-
-/*
- * Initialize PCI Devices, report devices found.
- */
-#ifndef CONFIG_PCI_PNP
-#if defined (CONFIG_MPC8240)
-static struct pci_config_table pci_eXalion_config_table[] = {
- {
- /* Intel 82559ER ethernet controller */
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 18, 0x00,
- pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER}},
- {
- /* Intel 82371AB PIIX4 PCI to ISA bridge */
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x00,
- pci_cfgfunc_config_device, {0,
- 0,
- PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
- {
- /* Intel 82371AB PIIX4 IDE controller */
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x01,
- pci_cfgfunc_config_device, {0,
- 0,
- PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
- {}
-};
-#elif defined (CONFIG_MPC8245)
-static struct pci_config_table pci_eXalion_config_table[] = {
- {
- /* Intel 82559ER ethernet controller */
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 17, 0x00,
- pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER}},
- {
- /* Intel 82559ER ethernet controller */
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 18, 0x00,
- pci_cfgfunc_config_device, {PCI_ENET1_IOADDR,
- PCI_ENET1_MEMADDR,
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER}},
- {
- /* Broadcom BCM5690 Gigabit switch */
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x00,
- pci_cfgfunc_config_device, {PCI_ENET2_IOADDR,
- PCI_ENET2_MEMADDR,
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER}},
- {
- /* Broadcom BCM5690 Gigabit switch */
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 21, 0x00,
- pci_cfgfunc_config_device, {PCI_ENET3_IOADDR,
- PCI_ENET3_MEMADDR,
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER}},
- {
- /* Intel 82371AB PIIX4 PCI to ISA bridge */
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 22, 0x00,
- pci_cfgfunc_config_device, {0,
- 0,
- PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
- {
- /* Intel 82371AB PIIX4 IDE controller */
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 22, 0x01,
- pci_cfgfunc_config_device, {0,
- 0,
- PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
- {}
-};
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-
-#endif /* #ifndef CONFIG_PCI_PNP */
-
-struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
- config_table:pci_eXalion_config_table,
- fixup_irq:pci_eXalion_fixup_irq,
-#endif
-};
-
-void pci_init_board (void)
-{
- pci_mpc824x_init (&hose);
-}
-
-int board_eth_init(bd_t *bis)
-{
- return pci_eth_init(bis);
-}
diff --git a/board/eXalion/eXalion.h b/board/eXalion/eXalion.h
deleted file mode 100644
index 7804f4f..0000000
--- a/board/eXalion/eXalion.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * (C) Copyright 2002
- * Torsten Demke, FORCE Computers GmbH. torsten.demke@fci.com
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * James Dougherty (jfd@broadcom.com)
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __EXALION_H
-#define __EXALION_H
-
-/* IRQ settings */
-#define PCI_INT_NA (0xff) /* PCI Intr. not used */
-#define PCI_INT_A (0x09) /* PCI Intr. A Interrupt Request Line Nr. */
-#define PCI_INT_B (0x0a) /* PCI Intr. B Interrupt Request Line Nr. */
-#define PCI_INT_C (0x0b) /* PCI Intr. C Interrupt Request Line Nr. */
-#define PCI_INT_D (0x0c) /* PCI Intr. D Interrupt Request Line Nr. */
-#if defined (CPU_MPC8245)
-#define LN_1_INT PCI_INT_B /* ethernet interrupt level */
-#define LN_2_INT PCI_INT_C /* ethernet interrupt level */
-#define BCM_1_INT PCI_INT_A /* BCM5690 interrupt level */
-#define BCM_2_INT PCI_INT_B /* BCM5690 interrupt level */
-#elif defined (CPU_MPC8240)
-#define BCM_INT PCI_INT_B /* BCM5600 interrupt level */
-#define LN_INT PCI_INT_C /* ethernet interrupt level */
-#endif
-
-#ifndef __ASSEMBLY__
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __EXALION_H */
diff --git a/board/eXalion/piix_pci.h b/board/eXalion/piix_pci.h
deleted file mode 100644
index 21c636f..0000000
--- a/board/eXalion/piix_pci.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * Torsten Demke, FORCE Computers GmbH. torsten.demke@fci.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef _PIIX4_PCI_H
-#define _PIIX4_PCI_H
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <pci.h>
-
-#define PIIX4_VENDOR_ID 0x8086
-#define PIIX4_ISA_DEV_ID 0x7110
-#define PIIX4_IDE_DEV_ID 0x7111
-
-/* Function 0 ISA Bridge */
-#define PCI_CFG_PIIX4_IORT 0x4C /* 8 bit ISA Recovery Timer Reg (default 0x4D) */
-#define PCI_CFG_PIIX4_XBCS 0x4E /* 16 bit XBus Chip select reg (default 0x0003) */
-#define PCI_CFG_PIIX4_PIRQC 0x60 /* PCI IRQ Route Register 4 x 8bit (default )*/
-#define PCI_CFG_PIIX4_SERIRQ 0x64
-#define PCI_CFG_PIIX4_TOM 0x69
-#define PCI_CFG_PIIX4_MSTAT 0x6A
-#define PCI_CFG_PIIX4_MBDMA 0x76
-#define PCI_CFG_PIIX4_APICBS 0x80
-#define PCI_CFG_PIIX4_DLC 0x82
-#define PCI_CFG_PIIX4_PDMACFG 0x90
-#define PCI_CFG_PIIX4_DDMABS 0x92
-#define PCI_CFG_PIIX4_GENCFG 0xB0
-#define PCI_CFG_PIIX4_RTCCFG 0xCB
-
-/* IO Addresses */
-#define PIIX4_ISA_DMA1_CH0BA 0x00
-#define PIIX4_ISA_DMA1_CH0CA 0x01
-#define PIIX4_ISA_DMA1_CH1BA 0x02
-#define PIIX4_ISA_DMA1_CH1CA 0x03
-#define PIIX4_ISA_DMA1_CH2BA 0x04
-#define PIIX4_ISA_DMA1_CH2CA 0x05
-#define PIIX4_ISA_DMA1_CH3BA 0x06
-#define PIIX4_ISA_DMA1_CH3CA 0x07
-#define PIIX4_ISA_DMA1_CMDST 0x08
-#define PIIX4_ISA_DMA1_REQ 0x09
-#define PIIX4_ISA_DMA1_WSBM 0x0A
-#define PIIX4_ISA_DMA1_CH_MOD 0x0B
-#define PIIX4_ISA_DMA1_CLR_PT 0x0C
-#define PIIX4_ISA_DMA1_M_CLR 0x0D
-#define PIIX4_ISA_DMA1_CLR_M 0x0E
-#define PIIX4_ISA_DMA1_RWAMB 0x0F
-
-#define PIIX4_ISA_DMA2_CH0BA 0xC0
-#define PIIX4_ISA_DMA2_CH0CA 0xC1
-#define PIIX4_ISA_DMA2_CH1BA 0xC2
-#define PIIX4_ISA_DMA2_CH1CA 0xC3
-#define PIIX4_ISA_DMA2_CH2BA 0xC4
-#define PIIX4_ISA_DMA2_CH2CA 0xC5
-#define PIIX4_ISA_DMA2_CH3BA 0xC6
-#define PIIX4_ISA_DMA2_CH3CA 0xC7
-#define PIIX4_ISA_DMA2_CMDST 0xD0
-#define PIIX4_ISA_DMA2_REQ 0xD2
-#define PIIX4_ISA_DMA2_WSBM 0xD4
-#define PIIX4_ISA_DMA2_CH_MOD 0xD6
-#define PIIX4_ISA_DMA2_CLR_PT 0xD8
-#define PIIX4_ISA_DMA2_M_CLR 0xDA
-#define PIIX4_ISA_DMA2_CLR_M 0xDC
-#define PIIX4_ISA_DMA2_RWAMB 0xDE
-
-#define PIIX4_ISA_INT1_ICW1 0x20
-#define PIIX4_ISA_INT1_OCW2 0x20
-#define PIIX4_ISA_INT1_OCW3 0x20
-#define PIIX4_ISA_INT1_ICW2 0x21
-#define PIIX4_ISA_INT1_ICW3 0x21
-#define PIIX4_ISA_INT1_ICW4 0x21
-#define PIIX4_ISA_INT1_OCW1 0x21
-
-#define PIIX4_ISA_INT1_ELCR 0x4D0
-
-#define PIIX4_ISA_INT2_ICW1 0xA0
-#define PIIX4_ISA_INT2_OCW2 0xA0
-#define PIIX4_ISA_INT2_OCW3 0xA0
-#define PIIX4_ISA_INT2_ICW2 0xA1
-#define PIIX4_ISA_INT2_ICW3 0xA1
-#define PIIX4_ISA_INT2_ICW4 0xA1
-#define PIIX4_ISA_INT2_OCW1 0xA1
-#define PIIX4_ISA_INT2_IMR 0xA1 /* read only */
-
-#define PIIX4_ISA_INT2_ELCR 0x4D1
-
-#define PIIX4_ISA_TMR0_CNT_ST 0x40
-#define PIIX4_ISA_TMR1_CNT_ST 0x41
-#define PIIX4_ISA_TMR2_CNT_ST 0x42
-#define PIIX4_ISA_TMR_TCW 0x43
-
-#define PIIX4_ISA_RST_XBUS 0x60
-
-#define PIIX4_ISA_NMI_CNT_ST 0x61
-#define PIIX4_ISA_NMI_ENABLE 0x70
-
-#define PIIX4_ISA_RTC_INDEX 0x70
-#define PIIX4_ISA_RTC_DATA 0x71
-#define PIIX4_ISA_RTCEXT_IND 0x70
-#define PIIX4_ISA_RTCEXT_DATA 0x71
-
-#define PIIX4_ISA_DMA1_CH2LPG 0x81
-#define PIIX4_ISA_DMA1_CH3LPG 0x82
-#define PIIX4_ISA_DMA1_CH1LPG 0x83
-#define PIIX4_ISA_DMA1_CH0LPG 0x87
-#define PIIX4_ISA_DMA2_CH2LPG 0x89
-#define PIIX4_ISA_DMA2_CH3LPG 0x8A
-#define PIIX4_ISA_DMA2_CH1LPG 0x8B
-#define PIIX4_ISA_DMA2_LPGRFR 0x8F
-
-#define PIIX4_ISA_PORT_92 0x92
-
-#define PIIX4_ISA_APM_CONTRL 0xB2
-#define PIIX4_ISA_APM_STATUS 0xB3
-
-#define PIIX4_ISA_COCPU_ERROR 0xF0
-
-/* Function 1 IDE Controller */
-#define PCI_CFG_PIIX4_BMIBA 0x20
-#define PCI_CFG_PIIX4_IDETIM 0x40
-#define PCI_CFG_PIIX4_SIDETIM 0x44
-#define PCI_CFG_PIIX4_UDMACTL 0x48
-#define PCI_CFG_PIIX4_UDMATIM 0x4A
-
-/* Function 2 USB Controller */
-#define PCI_CFG_PIIX4_SBRNUM 0x60
-#define PCI_CFG_PIIX4_LEGSUP 0xC0
-
-/* Function 3 Power Management */
-#define PCI_CFG_PIIX4_PMAB 0x40
-#define PCI_CFG_PIIX4_CNTA 0x44
-#define PCI_CFG_PIIX4_CNTB 0x48
-#define PCI_CFG_PIIX4_GPICTL 0x4C
-#define PCI_CFG_PIIX4_DEVRESD 0x50
-#define PCI_CFG_PIIX4_DEVACTA 0x54
-#define PCI_CFG_PIIX4_DEVACTB 0x58
-#define PCI_CFG_PIIX4_DEVRESA 0x5C
-#define PCI_CFG_PIIX4_DEVRESB 0x60
-#define PCI_CFG_PIIX4_DEVRESC 0x64
-#define PCI_CFG_PIIX4_DEVRESE 0x68
-#define PCI_CFG_PIIX4_DEVRESF 0x6C
-#define PCI_CFG_PIIX4_DEVRESG 0x70
-#define PCI_CFG_PIIX4_DEVRESH 0x74
-#define PCI_CFG_PIIX4_DEVRESI 0x78
-#define PCI_CFG_PIIX4_PMMISC 0x80
-#define PCI_CFG_PIIX4_SMBBA 0x90
-
-
-#endif /* _PIIX4_PCI_H */
diff --git a/board/musenki/Kconfig b/board/musenki/Kconfig
deleted file mode 100644
index 26b680f..0000000
--- a/board/musenki/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_MUSENKI
-
-config SYS_BOARD
- default "musenki"
-
-config SYS_CONFIG_NAME
- default "MUSENKI"
-
-endif
diff --git a/board/musenki/MAINTAINERS b/board/musenki/MAINTAINERS
deleted file mode 100644
index 4196c80..0000000
--- a/board/musenki/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MUSENKI BOARD
-#M: Jim Thompson <jim@musenki.com>
-S: Orphan (since 2014-04)
-F: board/musenki/
-F: include/configs/MUSENKI.h
-F: configs/MUSENKI_defconfig
diff --git a/board/musenki/Makefile b/board/musenki/Makefile
deleted file mode 100644
index d2b79ff..0000000
--- a/board/musenki/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = musenki.o flash.o
diff --git a/board/musenki/README b/board/musenki/README
deleted file mode 100644
index 084ab54..0000000
--- a/board/musenki/README
+++ /dev/null
@@ -1,298 +0,0 @@
-U-Boot for a Musenki M-3/M-1 board
----------------------------
-
-Musenki M-1 and M-3 have two banks of flash of 4MB or 8MB each.
-
-In board's notation, bank 0 is the one at the address of 0xFF800000
-and bank 1 is the one at the address of 0xFF000000.
-
-On power-up the processor jumps to the address of 0xFFF00100, the last
-megabyte of the bank 0 of flash.
-
-Thus, U-Boot is configured to reside in flash starting at the address of
-0xFFF00000. The environment space is located in flash separately from
-U-Boot, at the address of 0xFF800000.
-
-There is a Davicom 9102A on-board, but I don't have it working yet.
-
-U-Boot test results
---------------------
-
-x.x Operation on all available serial consoles
-
-x.x.x CONFIG_CONS_INDEX 1
-
-
-U-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
-
-CPU: MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: MUSENKI Local Bus at 100 MHz
-DRAM: 32 MB
-FLASH: 4 MB
-In: serial
-Out: serial
-Err: serial
-Hit any key to stop autoboot: 0
-=> help
-base - print or set address offset
-bdinfo - print Board Info structure
-bootm - boot application image from memory
-bootp - boot image via network using BootP/TFTP protocol
-bootd - boot default, i.e., run 'bootcmd'
-cmp - memory compare
-coninfo - print console devices and informations
-cp - memory copy
-crc32 - checksum calculation
-dcache - enable or disable data cache
-echo - echo args to console
-erase - erase FLASH memory
-flinfo - print FLASH memory information
-go - start application at address 'addr'
-help - print online help
-icache - enable or disable instruction cache
-iminfo - print header information for application image
-loadb - load binary file over serial line (kermit mode)
-loads - load S-Record file over serial line
-loop - infinite loop on address range
-md - memory display
-mm - memory modify (auto-incrementing)
-mtest - simple RAM test
-mw - memory write (fill)
-nm - memory modify (constant address)
-printenv- print environment variables
-protect - enable or disable FLASH write protection
-rarpboot- boot image via network using RARP/TFTP protocol
-reset - Perform RESET of the CPU
-run - run commands in an environment variable
-saveenv - save environment variables to persistent storage
-setenv - set environment variables
-source - run script from memory
-tftpboot- boot image via network using TFTP protocol
- and env variables ipaddr and serverip
-version - print monitor version
-? - alias for 'help'
-
-
-x.x.x CONFIG_CONS_INDEX 2
-
-**** NOT TESTED ****
-
-x.x Flash Driver Operation
-
-
-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
-
-CPU: MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: MUSENKI Local Bus at 100 MHz
-DRAM: 32 MB
-FLASH: 4 MB
-*** Warning - bad CRC, using default environment
-
-In: serial
-Out: serial
-Err: serial
-Hit any key to stop autoboot: 0
-=>
-=> md ff800000
-ff800000: 46989bf8 626f6f74 636d643d 626f6f74 F...bootcmd=boot
-ff800010: 6d204646 38323030 30300062 6f6f7464 m FF820000.bootd
-ff800020: 656c6179 3d350062 61756472 6174653d elay=5.baudrate=
-ff800030: 39363030 00636c6f 636b735f 696e5f6d 9600.clocks_in_m
-ff800040: 687a3d31 00737464 696e3d73 65726961 hz=1.stdin=seria
-ff800050: 6c007374 646f7574 3d736572 69616c00 l.stdout=serial.
-ff800060: 73746465 72723d73 65726961 6c006970 stderr=serial.ip
-ff800070: 61646472 3d313932 2e313638 2e302e34 addr=192.168.0.4
-ff800080: 32007365 72766572 69703d31 39322e31 2.serverip=192.1
-ff800090: 36382e30 2e380000 00000000 00000000 68.0.8..........
-ff8000a0: 00000000 00000000 00000000 00000000 ................
-ff8000b0: 00000000 00000000 00000000 00000000 ................
-ff8000c0: 00000000 00000000 00000000 00000000 ................
-ff8000d0: 00000000 00000000 00000000 00000000 ................
-ff8000e0: 00000000 00000000 00000000 00000000 ................
-ff8000f0: 00000000 00000000 00000000 00000000 ................
-=> protect off ff800000 ff81ffff
-Un-Protected 1 sectors
-=> erase ff800000 ff81ffff
-Erase Flash from 0xff800000 to 0xff81ffff
- done
-Erased 1 sectors
-=> md ff800000
-ff800000: ffffffff ffffffff ffffffff ffffffff ................
-ff800010: ffffffff ffffffff ffffffff ffffffff ................
-ff800020: ffffffff ffffffff ffffffff ffffffff ................
-ff800030: ffffffff ffffffff ffffffff ffffffff ................
-ff800040: ffffffff ffffffff ffffffff ffffffff ................
-ff800050: ffffffff ffffffff ffffffff ffffffff ................
-ff800060: ffffffff ffffffff ffffffff ffffffff ................
-ff800070: ffffffff ffffffff ffffffff ffffffff ................
-ff800080: ffffffff ffffffff ffffffff ffffffff ................
-ff800090: ffffffff ffffffff ffffffff ffffffff ................
-ff8000a0: ffffffff ffffffff ffffffff ffffffff ................
-ff8000b0: ffffffff ffffffff ffffffff ffffffff ................
-ff8000c0: ffffffff ffffffff ffffffff ffffffff ................
-ff8000d0: ffffffff ffffffff ffffffff ffffffff ................
-ff8000e0: ffffffff ffffffff ffffffff ffffffff ................
-ff8000f0: ffffffff ffffffff ffffffff ffffffff ................
-
-x.x.x Information
-
-
-U-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
-
-CPU: MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: MUSENKI Local Bus at 100 MHz
-DRAM: 32 MB
-FLASH: 4 MB
-*** Warning - bad CRC, using default environment
-
-In: serial
-Out: serial
-Err: serial
-Hit any key to stop autoboot: 0
-=> flinfo
-
-Bank # 1: Intel 28F320J3A (32Mbit = 128K x 32)
- Size: 4 MB in 32 Sectors
- Sector Start Addresses:
- FF800000 (RO) FF820000 FF840000 FF860000 FF880000
- FF8A0000 FF8C0000 FF8E0000 FF900000 FF920000
- FF940000 FF960000 FF980000 FF9A0000 FF9C0000
- FF9E0000 FFA00000 FFA20000 FFA40000 FFA60000
- FFA80000 FFAA0000 FFAC0000 FFAE0000 FFB00000
- FFB20000 FFB40000 FFB60000 FFB80000 FFBA0000
- FFBC0000 FFBE0000
-
-Bank # 2: missing or unknown FLASH type
-=>
-
-
-x.x.x Flash Programming
-
-
-U-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
-
-CPU: MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: MUSENKI Local Bus at 100 MHz
-DRAM: 32 MB
-FLASH: 4 MB
-
-In: serial
-Out: serial
-Err: serial
-Hit any key to stop autoboot: 0
-=>
-=>
-=>
-=> protect off ff800000 ff81ffff
-Un-Protected 1 sectors
-=> cp 0 ff800000 20
-Copy to Flash... done
-=> md ff800000
-ff800000: 37ce33ec 33cc334c 33c031cc 33cc35cc 7.3.3.3L3.1.3.5.
-ff800010: 33ec13ce 30ccb3ec b3c833c4 31c836cc 3...0.....3.1.6.
-ff800020: 33cc3b9d 31ec33ee 13ecf3cc 338833ec 3.;.1.3.....3.3.
-ff800030: 234c33ec 32cc22cc 33883bdc 534433cc #L3.2.".3.;.SD3.
-ff800040: 33cc30c8 31cc32ec 338c33cc 330c33dc 3.0.1.2.3.3.3.3.
-ff800050: 33cc13dc 334c534c b1c433d8 128c13cc 3...3LSL..3.....
-ff800060: 37ec36cd 33dc33cc bbc9f7e8 bbcc77cc 7.6.3.3.......w.
-ff800070: 314c0adc 139c30ed 33cc334c 33c833ec 1L....0.3.3L3.3.
-ff800080: ffffffff ffffffff ffffffff ffffffff ................
-ff800090: ffffffff ffffffff ffffffff ffffffff ................
-ff8000a0: ffffffff ffffffff ffffffff ffffffff ................
-ff8000b0: ffffffff ffffffff ffffffff ffffffff ................
-ff8000c0: ffffffff ffffffff ffffffff ffffffff ................
-ff8000d0: ffffffff ffffffff ffffffff ffffffff ................
-ff8000e0: ffffffff ffffffff ffffffff ffffffff ................
-ff8000f0: ffffffff ffffffff ffffffff ffffffff ................
-
-
-x.x.x Storage of environment variables in flash
-
-
-U-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
-
-CPU: MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: MUSENKI Local Bus at 100 MHz
-DRAM: 32 MB
-FLASH: 4 MB
-In: serial
-Out: serial
-Err: serial
-Hit any key to stop autoboot: 0
-=> printenv
-bootcmd=bootm FF820000
-bootdelay=5
-baudrate=9600
-clocks_in_mhz=1
-stdin=serial
-stdout=serial
-stderr=serial
-
-Environment size: 106/16380 bytes
-=> setenv myvar 1234
-=> saveenv
-Un-Protected 1 sectors
-Erasing Flash...
- done
-Erased 1 sectors
-Saving Environment to Flash...
-Protected 1 sectors
-=> reset
-
-
-U-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
-
-CPU: MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: MUSENKI Local Bus at 100 MHz
-DRAM: 32 MB
-FLASH: 4 MB
-In: serial
-Out: serial
-Err: serial
-Hit any key to stop autoboot: 0
-=> printenv
-bootcmd=bootm FF820000
-bootdelay=5
-baudrate=9600
-clocks_in_mhz=1
-myvar=1234
-stdin=serial
-stdout=serial
-stderr=serial
-
-Environment size: 117/16380 bytes
-
-x.x Image Download and run over serial port
-
-
-U-Boot 1.1.1 (Nov 20 2001 - 15:55:32)
-
-CPU: MPC8245 Revision 16.20 at 250 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: MUSENKI Local Bus at 100 MHz
-DRAM: 32 MB
-FLASH: 4 MB
-In: serial
-Out: serial
-Err: serial
-Hit any key to stop autoboot: 0
-=> loads
-## Ready for S-Record download ...
-
-## First Load Addr = 0x00040000
-## Last Load Addr = 0x00050177
-## Total Size = 0x00010178 = 65912 Bytes
-## Start Addr = 0x00040004
-=> go 40004
-## Starting application at 0x00040004 ...
-Hello World
-argc = 1
-argv[0] = "40004"
-argv[1] = "<NULL>"
-Hit any key to exit ...
-
-## Application terminated, rc = 0x0
-
-
-x.x Image download and run over ethernet interface
-
-untested (not working yet, actually)
diff --git a/board/musenki/flash.c b/board/musenki/flash.c
deleted file mode 100644
index 080ec7f..0000000
--- a/board/musenki/flash.c
+++ /dev/null
@@ -1,496 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef CONFIG_ENV_SIZE
-# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef CONFIG_ENV_SECT_SIZE
-# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-# endif
-#endif
-
-/*---------------------------------------------------------------------*/
-#undef DEBUG_FLASH
-
-#ifdef DEBUG_FLASH
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-/*---------------------------------------------------------------------*/
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_char *addr, flash_info_t *info);
-static int write_data (flash_info_t *info, uchar *dest, uchar data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-
-/*
- * don't ask. its stupid, but more than one soul has had to live with this mistake
- * "swaptab[i]" is the value of "i" with the bits reversed.
- */
-
-#define MUSENKI_BROKEN_FLASH 1
-
-#ifdef MUSENKI_BROKEN_FLASH
-unsigned char swaptab[256] = {
- 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
- 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
- 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
- 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
- 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
- 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
- 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
- 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
- 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
- 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
- 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
- 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
- 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
- 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
- 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
- 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
- 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
- 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
- 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
- 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
- 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
- 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
- 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
- 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
- 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
- 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
- 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
- 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
- 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
- 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
- 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
- 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff,
-};
-
-#define BS(b) (swaptab[b])
-
-#else
-
-#define BS(b) (b)
-
-#endif
-
-#define BYTEME(x) ((x) & 0xFF)
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- unsigned long size_b0, size_b1;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- DEBUGF("\n## Get flash bank 1 size @ 0x%08x\n",CONFIG_SYS_FLASH_BASE0_PRELIM);
-
- size_b0 = flash_get_size((vu_char *)CONFIG_SYS_FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0: "
- "ID 0x%lx, Size = 0x%08lx = %ld MB\n",
- flash_info[0].flash_id,
- size_b0, size_b0<<20);
- }
-
- DEBUGF("## Get flash bank 2 size @ 0x%08x\n",CONFIG_SYS_FLASH_BASE1_PRELIM);
- size_b1 = flash_get_size((vu_char *)CONFIG_SYS_FLASH_BASE1_PRELIM, &flash_info[1]);
-
- DEBUGF("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_info[0].size = size_b0;
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- DEBUGF("protect monitor %x @ %x\n", CONFIG_SYS_MONITOR_BASE, monitor_flash_len);
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[0]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- DEBUGF("protect environtment %x @ %x\n", CONFIG_ENV_ADDR, CONFIG_ENV_SECT_SIZE);
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
- &flash_info[0]);
-#endif
-
- if (size_b1) {
- flash_info[1].size = size_b1;
- flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[1]);
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
- &flash_info[1]);
-#endif
- } else {
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[1].sector_count = -1;
- flash_info[1].size = 0;
- }
-
- DEBUGF("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
- return (size_b0 + size_b1);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_INTEL:
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base;
- base += 0x00020000; /* 128k per bank */
- }
- return;
-
- default:
- printf ("Don't know sector ofsets for flash type 0x%lx\n", info->flash_id);
- return;
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("Fujitsu "); break;
- case FLASH_MAN_SST: printf ("SST "); break;
- case FLASH_MAN_STM: printf ("STM "); break;
- case FLASH_MAN_INTEL: printf ("Intel "); break;
- case FLASH_MAN_MT: printf ("MT "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F320J3A: printf ("28F320J3A (32Mbit = 128K x 32)\n");
- break;
- case FLASH_28F640J3A: printf ("28F640J3A (64Mbit = 128K x 64)\n");
- break;
- case FLASH_28F128J3A: printf ("28F128J3A (128Mbit = 128K x 128)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- if (info->size >= (1 << 20)) {
- i = 20;
- } else {
- i = 10;
- }
- printf (" Size: %ld %cB in %d Sectors\n",
- info->size >> i,
- (i == 20) ? 'M' : 'k',
- info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (vu_char *addr, flash_info_t *info)
-{
- vu_char manuf, device;
-
- addr[0] = BS(0x90);
- manuf = BS(addr[0]);
- DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (vu_char *)addr, manuf);
-
- switch (manuf) {
- case BYTEME(AMD_MANUFACT):
- info->flash_id = FLASH_MAN_AMD;
- break;
- case BYTEME(FUJ_MANUFACT):
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case BYTEME(SST_MANUFACT):
- info->flash_id = FLASH_MAN_SST;
- break;
- case BYTEME(STM_MANUFACT):
- info->flash_id = FLASH_MAN_STM;
- break;
- case BYTEME(INTEL_MANUFACT):
- info->flash_id = FLASH_MAN_INTEL;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- addr[0] = BS(0xFF); /* restore read mode, (yes, BS is a NOP) */
- return 0; /* no or unknown flash */
- }
-
- device = BS(addr[2]); /* device ID */
-
- DEBUGF("Device ID @ 0x%08x: 0x%08x\n", (&addr[1]), device);
-
- switch (device) {
- case BYTEME(INTEL_ID_28F320J3A):
- info->flash_id += FLASH_28F320J3A;
- info->sector_count = 32;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case BYTEME(INTEL_ID_28F640J3A):
- info->flash_id += FLASH_28F640J3A;
- info->sector_count = 64;
- info->size = 0x00800000;
- break; /* => 8 MB */
-
- case BYTEME(INTEL_ID_28F128J3A):
- info->flash_id += FLASH_28F128J3A;
- info->sector_count = 128;
- info->size = 0x01000000;
- break; /* => 16 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- addr[0] = BS(0xFF); /* restore read mode (yes, a NOP) */
- return 0; /* => no or unknown flash */
-
- }
-
- if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
- printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- }
-
- addr[0] = BS(0xFF); /* restore read mode */
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- int flag, prot, sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) {
- printf ("Can erase only Intel flash types - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n", prot);
- } else {
- printf ("\n");
- }
-
- start = get_timer (0);
- last = start;
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- vu_char *addr = (vu_char *)(info->start[sect]);
- unsigned long status;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- *addr = BS(0x50); /* clear status register */
- *addr = BS(0x20); /* erase setup */
- *addr = BS(0xD0); /* erase confirm */
-
- /* re-enable interrupts if necessary */
- if (flag) {
- enable_interrupts();
- }
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
- if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- *addr = BS(0xB0); /* suspend erase */
- *addr = BS(0xFF); /* reset to read mode */
- return 1;
- }
-
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
- *addr = BS(0xFF); /* reset to read mode */
- }
- }
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-#define FLASH_WIDTH 1 /* flash bus width in bytes */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- uchar *wp = (uchar *)addr;
- int rc;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return 4;
- }
-
- while (cnt > 0) {
- if ((rc = write_data(info, wp, *src)) != 0) {
- return rc;
- }
- wp++;
- src++;
- cnt--;
- }
-
- return cnt;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t *info, uchar *dest, uchar data)
-{
- vu_char *addr = (vu_char *)dest;
- ulong status;
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((BS(*addr) & data) != data) {
- return 2;
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- *addr = BS(0x40); /* write setup */
- *addr = data;
-
- /* re-enable interrupts if necessary */
- if (flag) {
- enable_interrupts();
- }
-
- start = get_timer (0);
-
- while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *addr = BS(0xFF); /* restore read mode */
- return 1;
- }
- }
-
- *addr = BS(0xFF); /* restore read mode */
-
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/musenki/musenki.c b/board/musenki/musenki.c
deleted file mode 100644
index aa92fc4..0000000
--- a/board/musenki/musenki.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * (C) Copyright 2001
- * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <pci.h>
-#include <netdev.h>
-
-int checkboard (void)
-{
- ulong busfreq = get_bus_freq(0);
- char buf[32];
-
- printf("Board: MUSENKI Local Bus at %s MHz\n", strmhz(buf, busfreq));
- return 0;
-
-}
-
-#if 0 /* NOT USED */
-int checkflash (void)
-{
- /* TODO: XXX XXX XXX */
- printf ("## Test not implemented yet ##\n");
-
- return (0);
-}
-#endif
-
-phys_size_t initdram (int board_type)
-{
- long size;
- long new_bank0_end;
- long mear1;
- long emear1;
-
- size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
-
- new_bank0_end = size - 1;
- mear1 = mpc824x_mpc107_getreg(MEAR1);
- emear1 = mpc824x_mpc107_getreg(EMEAR1);
- mear1 = (mear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
- emear1 = (emear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
- mpc824x_mpc107_setreg(MEAR1, mear1);
- mpc824x_mpc107_setreg(EMEAR1, emear1);
-
- return (size);
-}
-
-/*
- * Initialize PCI Devices
- */
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_sandpoint_config_table[] = {
-#if 0
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- 0x0, 0x0, 0x0, /* unknown eth0 divice */
- pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_IO |
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER }},
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- 0x0, 0x0, 0x0, /* unknown eth1 device */
- pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
- PCI_ENET1_MEMADDR,
- PCI_COMMAND_IO |
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER }},
-#endif
- { }
-};
-#endif
-
-struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
- config_table: pci_sandpoint_config_table,
-#endif
-};
-
-void pci_init_board(void)
-{
- pci_mpc824x_init(&hose);
-}
-
-int board_eth_init(bd_t *bis)
-{
- return pci_eth_init(bis);
-}
diff --git a/board/mvblue/Kconfig b/board/mvblue/Kconfig
deleted file mode 100644
index cee206b..0000000
--- a/board/mvblue/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_MVBLUE
-
-config SYS_BOARD
- default "mvblue"
-
-config SYS_CONFIG_NAME
- default "MVBLUE"
-
-endif
diff --git a/board/mvblue/MAINTAINERS b/board/mvblue/MAINTAINERS
deleted file mode 100644
index 5955f1a..0000000
--- a/board/mvblue/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MVBLUE BOARD
-#M: -
-S: Maintained
-F: board/mvblue/
-F: include/configs/MVBLUE.h
-F: configs/MVBLUE_defconfig
diff --git a/board/mvblue/Makefile b/board/mvblue/Makefile
deleted file mode 100644
index 76c10f8..0000000
--- a/board/mvblue/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = mvblue.o flash.o
diff --git a/board/mvblue/flash.c b/board/mvblue/flash.c
deleted file mode 100644
index 5dd658f..0000000
--- a/board/mvblue/flash.c
+++ /dev/null
@@ -1,570 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) Copyright 2001-2003
- *
- * Changes for MATRIX Vision mvBLUE devices
- * MATRIX Vision GmbH / hg,as info@matrix-vision.de
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-
-#if 0
- #define mvdebug(p) printf ##p
-#else
- #define mvdebug(p)
-#endif
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-#define FLASH_BUS_WIDTH 8
-
-#if (FLASH_BUS_WIDTH==32)
- #define FLASH_DATA_MASK 0xffffffff
- #define FLASH_SHIFT 1
- #define FDT vu_long
-#elif (FLASH_BUS_WIDTH==16)
- #define FLASH_DATA_MASK 0xff
- #define FLASH_SHIFT 0
- #define FDT vu_short
-#elif (FLASH_BUS_WIDTH==8)
- #define FLASH_DATA_MASK 0xff
- #define FLASH_SHIFT 0
- #define FDT vu_char
-#else
- #error FLASH_BUS_WIDTH undefined
-#endif
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *address, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-unsigned long flash_init (void)
-{
- unsigned long size_b0;
- int i;
-
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- size_b0 = flash_get_size((vu_long *)0xffc00000, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH : Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
- }
-
- flash_get_offsets (0xffc00000, &flash_info[0]);
- flash_info[0].size = size_b0;
-
- /* monitor protection OFF by default */
- flash_protect ( FLAG_PROTECT_CLEAR, 0xffc00000, 0x2000, flash_info );
-
- return size_b0;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE)
- { /* bottom boot sector types - these are the useful ones! */
- /* set sector offsets for bottom boot block type */
- if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B)
- { /* AMDLV320B has 8 x 8k bottom boot sectors */
- for (i = 0; i < 8; i++) /* +8k */
- info->start[i] = base + (i * (0x00002000 << FLASH_SHIFT));
- for (; i < info->sector_count; i++) /* +64k */
- info->start[i] = base + (i * (0x00010000 << FLASH_SHIFT)) - (0x00070000 << FLASH_SHIFT);
- }
- else
- { /* other types have 4 bottom boot sectors (16,8,8,32) */
- i = 0;
- info->start[i++] = base + 0x00000000; /* - */
- info->start[i++] = base + (0x00004000 << FLASH_SHIFT); /* +16k */
- info->start[i++] = base + (0x00006000 << FLASH_SHIFT); /* +8k */
- info->start[i++] = base + (0x00008000 << FLASH_SHIFT); /* +8k */
- info->start[i++] = base + (0x00010000 << FLASH_SHIFT); /* +32k */
- for (; i < info->sector_count; i++) /* +64k */
- info->start[i] = base + (i * (0x00010000 << FLASH_SHIFT)) - (0x00030000 << FLASH_SHIFT);
- }
- }
- else
- { /* top boot sector types - not so useful */
- /* set sector offsets for top boot block type */
- if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T)
- { /* AMDLV320T has 8 x 8k top boot sectors */
- for (i = 0; i < info->sector_count - 8; i++) /* +64k */
- info->start[i] = base + (i * (0x00010000 << FLASH_SHIFT));
- for (; i < info->sector_count; i++) /* +8k */
- info->start[i] = base + (i * (0x00002000 << FLASH_SHIFT));
- }
- else
- { /* other types have 4 top boot sectors (32,8,8,16) */
- for (i = 0; i < info->sector_count - 4; i++) /* +64k */
- info->start[i] = base + (i * (0x00010000 << FLASH_SHIFT));
-
- info->start[i++] = base + info->size - (0x00010000 << FLASH_SHIFT); /* -32k */
- info->start[i++] = base + info->size - (0x00008000 << FLASH_SHIFT); /* -8k */
- info->start[i++] = base + info->size - (0x00006000 << FLASH_SHIFT); /* -8k */
- info->start[i] = base + info->size - (0x00004000 << FLASH_SHIFT); /* -16k */
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_STM: printf ("ST "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- case FLASH_STMW320DB: printf ("M29W320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_STMW320DT: printf ("M29W320T (32 Mbit, top boot sector)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s", info->start[i], info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-#define AMD_ID_LV160T_MVS (AMD_ID_LV160T & FLASH_DATA_MASK)
-#define AMD_ID_LV160B_MVS (AMD_ID_LV160B & FLASH_DATA_MASK)
-#define AMD_ID_LV320T_MVS (AMD_ID_LV320T & FLASH_DATA_MASK)
-#define AMD_ID_LV320B_MVS (AMD_ID_LV320B & FLASH_DATA_MASK)
-#define STM_ID_W320DT_MVS (STM_ID_29W320DT & FLASH_DATA_MASK)
-#define STM_ID_W320DB_MVS (STM_ID_29W320DB & FLASH_DATA_MASK)
-#define AMD_MANUFACT_MVS (AMD_MANUFACT & FLASH_DATA_MASK)
-#define FUJ_MANUFACT_MVS (FUJ_MANUFACT & FLASH_DATA_MASK)
-#define STM_MANUFACT_MVS (STM_MANUFACT & FLASH_DATA_MASK)
-
-#if (FLASH_BUS_WIDTH >= 16)
- #define AUTOSELECT_ADDR1 0x0555
- #define AUTOSELECT_ADDR2 0x02AA
- #define AUTOSELECT_ADDR3 AUTOSELECT_ADDR1
-#else
- #define AUTOSELECT_ADDR1 0x0AAA
- #define AUTOSELECT_ADDR2 0x0555
- #define AUTOSELECT_ADDR3 AUTOSELECT_ADDR1
-#endif
-
-#define AUTOSELECT_DATA1 (0x00AA00AA & FLASH_DATA_MASK)
-#define AUTOSELECT_DATA2 (0x00550055 & FLASH_DATA_MASK)
-#define AUTOSELECT_DATA3 (0x00900090 & FLASH_DATA_MASK)
-
-#define RESET_BANK_DATA (0x00F000F0 & FLASH_DATA_MASK)
-
-
-static ulong flash_get_size (vu_long *address, flash_info_t *info)
-{
- short i;
- FDT value;
- FDT *addr = (FDT *)address;
-
- ulong base = (ulong)address;
- addr[AUTOSELECT_ADDR1] = AUTOSELECT_DATA1;
- addr[AUTOSELECT_ADDR2] = AUTOSELECT_DATA2;
- addr[AUTOSELECT_ADDR3] = AUTOSELECT_DATA3;
- __asm__ __volatile__("sync");
-
- udelay(180);
-
- value = addr[0]; /* manufacturer ID */
- switch (value) {
- case AMD_MANUFACT_MVS:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case FUJ_MANUFACT_MVS:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case STM_MANUFACT_MVS:
- info->flash_id = FLASH_MAN_STM;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-#if (FLASH_BUS_WIDTH >= 16)
- value = addr[1]; /* device ID */
-#else
- value = addr[2]; /* device ID */
-#endif
-
- switch (value) {
- case AMD_ID_LV160T_MVS:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 37;
- info->size = (0x00200000 << FLASH_SHIFT);
- break; /* => 2 or 4 MB */
-
- case AMD_ID_LV160B_MVS:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 37;
- info->size = (0x00200000 << FLASH_SHIFT);
- break; /* => 2 or 4 MB */
-
- case AMD_ID_LV320T_MVS:
- info->flash_id += FLASH_AM320T;
- info->sector_count = 71;
- info->size = (0x00400000 << FLASH_SHIFT);
- break; /* => 4 or 8 MB */
-
- case AMD_ID_LV320B_MVS:
- info->flash_id += FLASH_AM320B;
- info->sector_count = 71;
- info->size = (0x00400000 << FLASH_SHIFT);
- break; /* => 4 or 8MB */
-
- case STM_ID_W320DT_MVS:
- info->flash_id += FLASH_STMW320DT;
- info->sector_count = 67;
- info->size = (0x00400000 << FLASH_SHIFT);
- break; /* => 4 or 8 MB */
-
- case STM_ID_W320DB_MVS:
- info->flash_id += FLASH_STMW320DB;
- info->sector_count = 67;
- info->size = (0x00400000 << FLASH_SHIFT);
- break; /* => 4 or 8MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- /* set up sector start address table */
- flash_get_offsets (base, info);
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr = (FDT *)(info->start[i]);
- info->protect[i] = addr[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- addr = (FDT *)info->start[0];
- *addr = RESET_BANK_DATA; /* reset bank */
- }
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-#if (FLASH_BUS_WIDTH >= 16)
- #define ERASE_ADDR1 0x0555
- #define ERASE_ADDR2 0x02AA
-#else
- #define ERASE_ADDR1 0x0AAA
- #define ERASE_ADDR2 0x0555
-#endif
-
-#define ERASE_ADDR3 ERASE_ADDR1
-#define ERASE_ADDR4 ERASE_ADDR1
-#define ERASE_ADDR5 ERASE_ADDR2
-
-#define ERASE_DATA1 (0x00AA00AA & FLASH_DATA_MASK)
-#define ERASE_DATA2 (0x00550055 & FLASH_DATA_MASK)
-#define ERASE_DATA3 (0x00800080 & FLASH_DATA_MASK)
-#define ERASE_DATA4 ERASE_DATA1
-#define ERASE_DATA5 ERASE_DATA2
-
-#define ERASE_SECTOR_DATA (0x00300030 & FLASH_DATA_MASK)
-#define ERASE_CHIP_DATA (0x00100010 & FLASH_DATA_MASK)
-#define ERASE_CONFIRM_DATA (0x00800080 & FLASH_DATA_MASK)
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- FDT *addr = (FDT *)(info->start[0]);
-
- int prot, sect, l_sect, flag;
- ulong start, now, last;
-
- __asm__ __volatile__ ("sync");
- addr[0] = 0xf0;
- udelay(1000);
-
- printf("\nflash_erase: first = %d @ 0x%08lx\n", s_first, info->start[s_first] );
- printf(" last = %d @ 0x%08lx\n", s_last , info->start[s_last ] );
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) || (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n", info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[ERASE_ADDR1] = ERASE_DATA1;
- addr[ERASE_ADDR2] = ERASE_DATA2;
- addr[ERASE_ADDR3] = ERASE_DATA3;
- addr[ERASE_ADDR4] = ERASE_DATA4;
- addr[ERASE_ADDR5] = ERASE_DATA5;
-
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) {
- addr = (FDT *)(info->start[sect]);
- addr[0] = ERASE_SECTOR_DATA;
- l_sect = sect;
- }
- }
-
- if (flag)
- enable_interrupts();
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (FDT *)(info->start[l_sect]);
-
- while ((addr[0] & ERASE_CONFIRM_DATA) != ERASE_CONFIRM_DATA) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
-DONE:
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-#define BUFF_INC 4
- ulong cp, wp, data;
- int i, l, rc;
-
- mvdebug (("+write_buff %p ==> 0x%08lx, count = 0x%08lx\n", src, addr, cnt));
-
- wp = (addr & ~3); /* get lower word aligned address */
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- mvdebug ((" handle unaligned start bytes (cnt = 0x%08lx)\n", cnt));
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<BUFF_INC && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<BUFF_INC; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += BUFF_INC;
- }
-
- /*
- * handle (half)word aligned part
- */
- mvdebug ((" handle word aligned part (cnt = 0x%08lx)\n", cnt));
- while (cnt >= BUFF_INC) {
- data = 0;
- for (i=0; i<BUFF_INC; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += BUFF_INC;
- cnt -= BUFF_INC;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- mvdebug ((" handle unaligned tail bytes (cnt = 0x%08lx)\n", cnt));
- data = 0;
- for (i=0, cp=wp; i<BUFF_INC && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<BUFF_INC; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-#if (FLASH_BUS_WIDTH >= 16)
- #define WRITE_ADDR1 0x0555
- #define WRITE_ADDR2 0x02AA
-#else
- #define WRITE_ADDR1 0x0AAA
- #define WRITE_ADDR2 0x0555
- #define WRITE_ADDR3 WRITE_ADDR1
-#endif
-
-#define WRITE_DATA1 (0x00AA00AA & FLASH_DATA_MASK)
-#define WRITE_DATA2 (0x00550055 & FLASH_DATA_MASK)
-#define WRITE_DATA3 (0x00A000A0 & FLASH_DATA_MASK)
-
-#define WRITE_CONFIRM_DATA ERASE_CONFIRM_DATA
-
-/*-----------------------------------------------------------------------
- * Write a byte to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_char (flash_info_t *info, ulong dest, uchar data)
-{
- vu_char *addr = (vu_char *)(info->start[0]);
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_char *)dest) & data) != data) {
- printf(" *** ERROR: Flash not erased !\n");
- return (2);
- }
- flag = disable_interrupts();
-
- addr[WRITE_ADDR1] = WRITE_DATA1;
- addr[WRITE_ADDR2] = WRITE_DATA2;
- addr[WRITE_ADDR3] = WRITE_DATA3;
- *((vu_char *)dest) = data;
-
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
- addr = (vu_char *)dest;
- while (( (*addr) & WRITE_CONFIRM_DATA) != (data & WRITE_CONFIRM_DATA)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- printf(" *** ERROR: Flash write timeout !");
- return (1);
- }
- }
- mvdebug (("-write_byte\n"));
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- int i,
- result = 0;
-
- mvdebug (("+write_word : 0x%08lx @ 0x%08lx\n", data, dest));
- for ( i=0; (i < 4) && (result == 0); i++, dest+=1 )
- result = write_char (info, dest, (data >> (8*(3-i))) & 0xff );
- mvdebug (("-write_word\n"));
- return result;
-}
-/*---------------------------------------------------------------- */
diff --git a/board/mvblue/mvblue.c b/board/mvblue/mvblue.c
deleted file mode 100644
index 63503e8..0000000
--- a/board/mvblue/mvblue.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * GNU General Public License for more details.
- *
- * MATRIX Vision GmbH / June 2002-Nov 2003
- * Andre Schwarz
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/io.h>
-#include <ns16550.h>
-#include <netdev.h>
-
-#ifdef CONFIG_PCI
-#include <pci.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-u32 get_BoardType (void);
-
-#define PCI_CONFIG(b,d,f,r) cpu_to_le32(0x80000000 | ((b&0xff)<<16) \
- | ((d&0x1f)<<11) \
- | ((f&0x7)<<7) \
- | (r&0xfc) )
-
-int mv_pci_read (int bus, int dev, int func, int reg)
-{
- *(u32 *) (0xfec00cf8) = PCI_CONFIG (bus, dev, func, reg);
- asm ("sync");
- return cpu_to_le32 (*(u32 *) (0xfee00cfc));
-}
-
-u32 get_BoardType ()
-{
- return (mv_pci_read (0, 0xe, 0, 0) == 0x06801095 ? 0 : 1);
-}
-
-void init_2nd_DUART (void)
-{
- NS16550_t console = (NS16550_t) CONFIG_SYS_NS16550_COM2;
- int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE;
-
- *(u8 *) (0xfc004511) = 0x1;
- NS16550_init (console, clock_divisor);
-}
-void hw_watchdog_reset (void)
-{
- if (get_BoardType () == 0) {
- *(u32 *) (0xff000005) = 0;
- asm ("sync");
- }
-}
-int checkboard (void)
-{
- ulong busfreq = get_bus_freq (0);
- char buf[32];
- u32 BoardType = get_BoardType ();
- char *BoardName[2] = { "mvBlueBOX", "mvBlueLYNX" };
- char *p;
-
- hw_watchdog_reset ();
-
- printf ("U-Boot (%s) running on mvBLUE device.\n", MV_VERSION);
- printf (" Found %s running at %s MHz memory clock.\n",
- BoardName[BoardType], strmhz (buf, busfreq));
-
- init_2nd_DUART ();
-
- if ((p = getenv ("console_nr")) != NULL) {
- unsigned long con_nr = simple_strtoul (p, NULL, 10) & 3;
-
- gd->baudrate &= ~3;
- gd->baudrate |= con_nr & 3;
- }
- return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
- long size;
- long new_bank0_end;
- long mear1;
- long emear1;
-
- size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
-
- new_bank0_end = size - 1;
- mear1 = mpc824x_mpc107_getreg(MEAR1);
- emear1 = mpc824x_mpc107_getreg(EMEAR1);
- mear1 = (mear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
- emear1 = (emear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
- mpc824x_mpc107_setreg(MEAR1, mear1);
- mpc824x_mpc107_setreg(EMEAR1, emear1);
-
- return (size);
-}
-
-/* ------------------------------------------------------------------------- */
-u8 *dhcp_vendorex_prep (u8 * e)
-{
- char *ptr;
-
- /* DHCP vendor-class-identifier = 60 */
- if ((ptr = getenv ("dhcp_vendor-class-identifier"))) {
- *e++ = 60;
- *e++ = strlen (ptr);
- while (*ptr)
- *e++ = *ptr++;
- }
- /* my DHCP_CLIENT_IDENTIFIER = 61 */
- if ((ptr = getenv ("dhcp_client_id"))) {
- *e++ = 61;
- *e++ = strlen (ptr);
- while (*ptr)
- *e++ = *ptr++;
- }
- return e;
-}
-
-u8 *dhcp_vendorex_proc (u8 * popt)
-{
- return NULL;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Initialize PCI Devices
- */
-#ifdef CONFIG_PCI
-void pci_mvblue_clear_base (struct pci_controller *hose, pci_dev_t dev)
-{
- u32 cnt;
-
- printf ("clear base @ dev/func 0x%02x/0x%02x ... ", PCI_DEV (dev),
- PCI_FUNC (dev));
- for (cnt = 0; cnt < 6; cnt++)
- pci_hose_write_config_dword (hose, dev, 0x10 + (4 * cnt),
- 0x0);
- printf ("done\n");
-}
-
-void duart_setup (u32 base, u16 divisor)
-{
- printf ("duart setup ...");
- out_8 ((u8 *) (CONFIG_SYS_ISA_IO + base + 3), 0x80);
- out_8 ((u8 *) (CONFIG_SYS_ISA_IO + base + 0), divisor & 0xff);
- out_8 ((u8 *) (CONFIG_SYS_ISA_IO + base + 1), divisor >> 8);
- out_8 ((u8 *) (CONFIG_SYS_ISA_IO + base + 3), 0x03);
- out_8 ((u8 *) (CONFIG_SYS_ISA_IO + base + 4), 0x03);
- out_8 ((u8 *) (CONFIG_SYS_ISA_IO + base + 2), 0x07);
- printf ("done\n");
-}
-
-void pci_mvblue_fixup_irq_behind_bridge (struct pci_controller *hose,
- pci_dev_t bridge, unsigned char irq)
-{
- pci_dev_t d;
- unsigned char bus;
- unsigned short vendor, class;
-
- pci_hose_read_config_byte (hose, bridge, PCI_SECONDARY_BUS, &bus);
- for (d = PCI_BDF (bus, 0, 0);
- d < PCI_BDF (bus, PCI_MAX_PCI_DEVICES - 1,
- PCI_MAX_PCI_FUNCTIONS - 1);
- d += PCI_BDF (0, 0, 1)) {
- pci_hose_read_config_word (hose, d, PCI_VENDOR_ID, &vendor);
- if (vendor != 0xffff && vendor != 0x0000) {
- pci_hose_read_config_word (hose, d, PCI_CLASS_DEVICE,
- &class);
- if (class == PCI_CLASS_BRIDGE_PCI)
- pci_mvblue_fixup_irq_behind_bridge (hose, d,
- irq);
- else
- pci_hose_write_config_byte (hose, d,
- PCI_INTERRUPT_LINE,
- irq);
- }
- }
-}
-
-#define MV_MAX_PCI_BUSSES 3
-#define SLOT0_IRQ 3
-#define SLOT1_IRQ 4
-void pci_mvblue_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
-{
- unsigned char line = 0xff;
- unsigned short class;
-
- if (PCI_BUS (dev) == 0) {
- switch (PCI_DEV (dev)) {
- case 0xd:
- if (get_BoardType () == 0) {
- line = 1;
- } else
- /* mvBL */
- line = 2;
- break;
- case 0xe:
- /* mvBB: IDE */
- line = 2;
- pci_hose_write_config_byte (hose, dev, 0x8a, 0x20);
- break;
- case 0xf:
- /* mvBB: Slot0 (Grabber) */
- pci_hose_read_config_word (hose, dev,
- PCI_CLASS_DEVICE, &class);
- if (class == PCI_CLASS_BRIDGE_PCI) {
- pci_mvblue_fixup_irq_behind_bridge (hose, dev,
- SLOT0_IRQ);
- line = 0xff;
- } else
- line = SLOT0_IRQ;
- break;
- case 0x10:
- /* mvBB: Slot1 */
- pci_hose_read_config_word (hose, dev,
- PCI_CLASS_DEVICE, &class);
- if (class == PCI_CLASS_BRIDGE_PCI) {
- pci_mvblue_fixup_irq_behind_bridge (hose, dev,
- SLOT1_IRQ);
- line = 0xff;
- } else
- line = SLOT1_IRQ;
- break;
- default:
- printf ("***pci_scan: illegal dev = 0x%08x\n",
- PCI_DEV (dev));
- line = 0xff;
- break;
- }
- pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE,
- line);
- }
-}
-
-struct pci_controller hose = {
- fixup_irq:pci_mvblue_fixup_irq
-};
-
-void pci_init_board (void)
-{
- pci_mpc824x_init (&hose);
-}
-
-int board_eth_init(bd_t *bis)
-{
- return pci_eth_init(bis);
-}
-#endif
diff --git a/board/mvblue/u-boot.lds b/board/mvblue/u-boot.lds
deleted file mode 100644
index 5034a96..0000000
--- a/board/mvblue/u-boot.lds
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * (C) Copyright 2001-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- .text :
- {
- arch/powerpc/cpu/mpc824x/start.o (.text*)
- lib/built-in.o (.text*)
- net/built-in.o (.text*)
- drivers/pci/built-in.o (.text*)
- arch/powerpc/cpu/mpc824x/built-in.o (.text*)
- board/mvblue/built-in.o (.text*)
- arch/powerpc/lib/built-in.o (.text*)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.ppcenv*)
-
- *(.text*)
- . = ALIGN(16);
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/sandpoint/Kconfig b/board/sandpoint/Kconfig
deleted file mode 100644
index c19b63e..0000000
--- a/board/sandpoint/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-if TARGET_SANDPOINT8240
-
-config SYS_BOARD
- default "sandpoint"
-
-config SYS_CONFIG_NAME
- default "Sandpoint8240"
-
-endif
-
-if TARGET_SANDPOINT8245
-
-config SYS_BOARD
- default "sandpoint"
-
-config SYS_CONFIG_NAME
- default "Sandpoint8245"
-
-endif
diff --git a/board/sandpoint/MAINTAINERS b/board/sandpoint/MAINTAINERS
deleted file mode 100644
index 569cf42..0000000
--- a/board/sandpoint/MAINTAINERS
+++ /dev/null
@@ -1,12 +0,0 @@
-SANDPOINT BOARD
-M: Wolfgang Denk <wd@denx.de>
-S: Maintained
-F: board/sandpoint/
-F: include/configs/Sandpoint8240.h
-F: configs/Sandpoint8240_defconfig
-
-SANDPOINT8245 BOARD
-#M: Jim Thompson <jim@musenki.com>
-S: Orphan (since 2014-04)
-F: include/configs/Sandpoint8245.h
-F: configs/Sandpoint8245_defconfig
diff --git a/board/sandpoint/Makefile b/board/sandpoint/Makefile
deleted file mode 100644
index 58f5a89..0000000
--- a/board/sandpoint/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = sandpoint.o flash.o
diff --git a/board/sandpoint/README b/board/sandpoint/README
deleted file mode 100644
index c9996a8..0000000
--- a/board/sandpoint/README
+++ /dev/null
@@ -1,411 +0,0 @@
-This port of U-Boot will run on a Motorola Sandpoint 3 development
-system equipped with a Unity X4 PPMC card (MPC8240 CPU) only. It is a
-snapshot of work in progress and far from being completed. In order
-to run it on the target system, it has to be downloaded using the
-DINK32 monitor program that came with your Sandpoint system. Please
-note that DINK32 does not accept the S-Record file created by the
-U-Boot build process unmodified, because it contains CR/LF line
-terminators. You have to strip the CR characters first. There is a
-tiny script named 'dinkdl' I created for this purpose.
-
-The Sandpoint port is based on the work of Rob Taylor, who does not
-seem to maintain it any more. I can be reached by mail as
-tkoeller@gmx.net.
-
-Thomas Koeller
-
-
-The port was tested on a Sandpoint 8240 X3 board, with U-Boot
-installed in the flash memory of the CPU card. Please use the
-following DIP switch settings:
-
-Motherboard:
-
-SW1.1: on SW1.2: on SW1.3: on SW1.4: on
-SW1.5: on SW1.6: on SW1.7: on SW1.8: on
-
-SW2.1: on SW2.2: on SW2.3: on SW2.4: on
-SW2.5: on SW2.6: on SW2.7: on SW2.8: on
-
-
-CPU Card:
-
-SW2.1: OFF SW2.2: OFF SW2.3: on SW2.4: on
-SW2.5: OFF SW2.6: OFF SW2.7: OFF SW2.8: OFF
-
-SW3.1: OFF SW3.2: on SW3.3: OFF SW3.4: OFF
-SW3.5: on SW3.6: OFF SW3.7: OFF SW3.8: on
-
-
-The followind detailed description of installation and initial steps
-with U-Boot and QNX was provided by Jim Sandoz <sandoz@lucent.com>:
-
-
-Directions for installing U-Boot on Sandpoint+Unity8240
-using the Abatron BDI2000 BDM/JTAG debugger ...
-
-Background and Reference info:
-http://u-boot.sourceforge.net/
-http://www.abatron.ch/
-http://www.abatron.ch/BDI/bdihw.html
-http://www.abatron.ch/DataSheets/BDI2000.pdf
-http://www.abatron.ch/Manuals/ManGdbCOP-2000C.pdf
-http://e-www.motorola.com/collateral/SPX3UM.pdf
-http://e-www.motorola.com/collateral/UNITYX4CONFIG.pdf
-
-
-Connection Diagram:
- ===========
- === ===== |----- |
-| | <---------------> | | | | |
-|PC | rs232 | BDI |=============[] | |
-| | |2000 | BDM probe | | |
-| | <---------------> | | |----- |
- === ethernet ===== | |
- | |
- ===========
- Sandpoint X3 with
- Unity 8240 proc
-
-
-PART 1)
- DIP Switch Settings:
-
-Sandpoint X3 8240 processor board DIP switch settings, with
-U-Boot to be installed in the flash memory of the CPU card:
-
-Motorola Sandpoint X3 Motherboard:
-SW1.1: on SW1.2: on SW1.3: on SW1.4: on
-SW1.5: on SW1.6: on SW1.7: on SW1.8: on
-SW2.1: on SW2.2: on SW2.3: on SW2.4: on
-SW2.5: on SW2.6: on SW2.7: on SW2.8: on
-
-Motorola Unity 8240 CPU Card:
-SW2.1: OFF SW2.2: OFF SW2.3: on SW2.4: on
-SW2.5: OFF SW2.6: OFF SW2.7: OFF SW2.8: OFF
-SW3.1: OFF SW3.2: on SW3.3: OFF SW3.4: OFF
-SW3.5: on SW3.6: OFF SW3.7: OFF SW3.8: on
-
-
-PART 2)
- Connect the BDI2000 Cable to the Sandpoint/Unity 8240:
-
-BDM Pin 1 on the Unity 8240 processor board is towards the
-PCI PMC connectors, or away from the socketed SDRAM, i.e.:
-
- ====================
- | ---------------- |
- | | SDRAM | |
- | | | |
- | ---------------- |
- | |~| |
- | |B| ++++++ |
- | |D| + uP + |
- | |M| +8240+ |
- | ~ 1 ++++++ |
- | |
- | |
- | |
- | PMC conn ====== |
- | ===== ====== |
- | |
- ====================
-
-
-PART 3)
- Setting up the BDI2000, and preparing for TCP/IP network comms:
-
-Connect the BDI2000 to the PC using the supplied serial cable.
-Download the BDI2000 software and install it using setup.exe.
-
-[Note: of course you can also use the Linux command line tool
-"bdisetup" to configure your BDI2000 - the sources are included on
-the floppy disk that comes with your BDI2000. Just in case you don't
-have any Windows PC's - like me :-) -- wd ]
-
-Power up the BDI2000; then follow directions to assign the IP
-address and related network information. Note that U-Boot
-will be loaded to the Sandpoint via tftp. You need to either
-use the Abatron-provided tftp application or provide a tftp
-server (e.g. Linux/Solaris/*BSD) somewhere on your network.
-Once the IP address etc are assigned via the RS232 port,
-further communication with the BDI2000 will happen via the
-ethernet connection.
-
-PART 4)
- Making a TCP/IP network connection to the Abatron BDI2000:
-
-Telnet to the Abatron BDI2000. Assuming that all of the
-networking info was loaded via RS232 correctly, you will see
-the following (scrolling):
-
-- TARGET: waiting for target Vcc
-- TARGET: waiting for target Vcc
-
-
-PART 5)
- Power up the target Sandpoint:
-If the BDM connections are correct, the following will now appear:
-
-- TARGET: waiting for target Vcc
-- TARGET: waiting for target Vcc
-- TARGET: processing power-up delay
-- TARGET: processing user reset request
-- BDI asserts HRESET
-- Reset JTAG controller passed
-- Bypass check: 0x55 => 0xAA
-- Bypass check: 0x55 => 0xAA
-- JTAG exists check passed
-- Target PVR is 0x00810101
-- COP status is 0x01
-- Check running state passed
-- BDI scans COP freeze command
-- BDI removes HRESET
-- COP status is 0x05
-- Check stopped state passed
-- Check LSRL length passed
-- BDI sets breakpoint at 0xFFF00100
-- BDI resumes program execution
-- Waiting for target stop passed
-- TARGET: Target PVR is 0x00810101
-- TARGET: reseting target passed
-- TARGET: processing target startup ....
-- TARGET: processing target startup passed
-BDI>
-
-
-PART 6)
- Erase the current contents of the flash memory:
-
-BDI>era 0xFFF00000
- Erasing flash at 0xfff00000
- Erasing flash passed
-BDI>era 0xFFF04000
- Erasing flash at 0xfff04000
- Erasing flash passed
-BDI>era 0xFFF06000
- Erasing flash at 0xfff06000
- Erasing flash passed
-BDI>era 0xFFF08000
- Erasing flash at 0xfff08000
- Erasing flash passed
-BDI>era 0xFFF10000
- Erasing flash at 0xfff10000
- Erasing flash passed
-BDI>era 0xFFF20000
- Erasing flash at 0xfff20000
- Erasing flash passed
-
-
-PART 7)
- Program the flash memory with the U-Boot image:
-
-BDI>prog 0xFFF00000 u-boot.bin bin
- Programming u-boot.bin , please wait ....
- Programming flash passed
-
-
-PART 8)
- Connect PC to Sandpoint:
-Using a crossover serial cable, attach the PC serial port to the
-Sandpoint's COM1. Set communications parameters to 8N1 / 9600 baud.
-
-
-PART 9)
- Reset the Unity and begin U-Boot execution:
-
-BDI>reset
-- TARGET: processing user reset request
-- TARGET: Target PVR is 0x00810101
-- TARGET: reseting target passed
-- TARGET: processing target init list ....
-- TARGET: processing target init list passed
-
-BDI>go
-
-Now see output from U-Boot running, sent via serial port:
-
-U-Boot 1.1.4 (Jan 23 2002 - 18:29:19)
-
-CPU: MPC8240 Revision 1.1 at 264 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: Sandpoint 8240 Unity
-DRAM: 64 MB
-FLASH: 2 MB
-PCI: scanning bus0 ...
- bus dev fn venID devID class rev MBAR0 MBAR1 IPIN ILINE
- 00 00 00 1057 0003 060000 13 00000008 00000000 01 00
- 00 0b 00 10ad 0565 060100 10 00000000 00000000 00 00
- 00 0f 00 8086 1229 020000 08 80000000 80000001 01 00
-In: serial
-Out: serial
-Err: serial
-=>
-
-
-PART 10)
- Set and save any required environmental variables, examples of some:
-
-=> setenv ethaddr 00:03:47:97:D0:79
-=> setenv bootfile your_qnx_image_here
-=> setenv hostname sandpointX
-=> setenv netmask 255.255.255.0
-=> setenv ipaddr 192.168.0.11
-=> setenv serverip 192.168.0.10
-=> setenv gatewayip=192.168.0.1
-=> saveenv
-Saving Environment to Flash...
-Un-Protected 1 sectors
-Erasing Flash...
- done
-Erased 1 sectors
-Writing to Flash... done
-Protected 1 sectors
-=>
-
-**** Example environment: ****
-
-=> printenv
-baudrate=9600
-bootfile=telemetry
-hostname=sp1
-ethaddr=00:03:47:97:E4:6B
-load=tftp 100000 u-boot.bin
-update=protect off all;era FFF00000 FFF3FFFF;cp.b 100000 FFF00000 ${filesize};saveenv
-filesize=1f304
-gatewayip=145.17.228.1
-netmask=255.255.255.0
-ipaddr=145.17.228.42
-serverip=145.17.242.46
-stdin=serial
-stdout=serial
-stderr=serial
-
-Environment size: 332/8188 bytes
-=>
-
-here's some text useful stuff for cut-n-paste:
-setenv hostname sandpoint1
-setenv netmask 255.255.255.0
-setenv ipaddr 145.17.228.81
-setenv serverip 145.17.242.46
-setenv gatewayip 145.17.228.1
-saveenv
-
-PART 11)
- Test U-Boot by tftp'ing new U-Boot, overwriting current:
-
-=> protect off all
-Un-Protect Flash Bank # 1
-=> tftp 100000 u-boot.bin
-eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
-ARP broadcast 1
-TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
- gateway 145.17.228.1
-Filename 'u-boot.bin'.
-Load address: 0x100000
-Loading: #########################
-done
-Bytes transferred = 127628 (1f28c hex)
-=> era all
-Erase Flash Bank # 1
- done
-Erase Flash Bank # 2 - missing
-=> cp.b 0x100000 FFF00000 1f28c
-Copy to Flash... done
-=> saveenv
-Saving Environment to Flash...
-Un-Protected 1 sectors
-Erasing Flash...
- done
-Erased 1 sectors
-Writing to Flash... done
-Protected 1 sectors
-=> reset
-
-You can put these commands into some environment variables;
-
-=> setenv load tftp 100000 u-boot.bin
-=> setenv update protect off all\;era FFF00000 FFF3FFFF\;cp.b 100000 FFF00000 \${filesize}\;saveenv
-=> saveenv
-
-Then you just have to type "run load" then "run update"
-
-=> run load
-eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
-ARP broadcast 1
-TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
- gateway 145.17.228.1
-Filename 'u-boot.bin'.
-Load address: 0x100000
-Loading: #########################
-done
-Bytes transferred = 127748 (1f304 hex)
-=> run update
-Un-Protect Flash Bank # 1
-Un-Protect Flash Bank # 2
-Erase Flash from 0xfff00000 to 0xfff3ffff
- done
-Erased 7 sectors
-Copy to Flash... done
-Saving Environment to Flash...
-Un-Protected 1 sectors
-Erasing Flash...
- done
-Erased 1 sectors
-Writing to Flash... done
-Protected 1 sectors
-=>
-
-
-PART 12)
- Load OS image (ELF format) via U-Boot using tftp
-
-
-=> tftp 800000 sandpoint-simple.elf
-eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
-ARP broadcast 1
-TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
- gateway 145.17.228.1
-Filename 'sandpoint-simple.elf'.
-Load address: 0x800000
-Loading: #################################################################
- #################################################################
- #################################################################
- ########################
-done
-Bytes transferred = 1120284 (11181c hex)
-==>
-
-PART 13)
- Begin OS image execution: (note that unless you have the
-serial parameters of your OS image set to 9600 (i.e. same as
-the U-Boot binary) you will get garbage here until you change
-the serial communications speed.
-
-=> bootelf 800000
-Loading @ 0x001f0100 (1120028 bytes)
-## Starting application at 0x001f1d28 ...
-Replace init_hwinfo() with a board specific version
-
-Loading QNX6....
-
-Header size=0x0000009c, Total Size=0x000005c0, #Cpu=1, Type=1
-<...loader and kernel messages snipped...>
-
-Welcome to Neutrino on the Sandpoint
-#
-
-
-other information:
-
-CVS Retrieval Notes:
-
-U-Boot's SourceForge CVS repository can be checked out
-through anonymous (pserver) CVS with the following
-instruction set. The module you wish to check out must
-be specified as the modulename. When prompted for a
-password for anonymous, simply press the Enter key.
-
-cvs -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot login
-
-cvs -z6 -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot co -P u-boot
diff --git a/board/sandpoint/dinkdl b/board/sandpoint/dinkdl
deleted file mode 100644
index f281452..0000000
--- a/board/sandpoint/dinkdl
+++ /dev/null
@@ -1,2 +0,0 @@
-#! /bin/bash
-tr -d "\r" <$1 >/dev/tts/1
diff --git a/board/sandpoint/flash.c b/board/sandpoint/flash.c
deleted file mode 100644
index 1ab668c..0000000
--- a/board/sandpoint/flash.c
+++ /dev/null
@@ -1,748 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-#include <asm/pci_io.h>
-#include <w83c553f.h>
-
-#define ROM_CS0_START 0xFF800000
-#define ROM_CS1_START 0xFF000000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef CONFIG_ENV_SIZE
-# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef CONFIG_ENV_SECT_SIZE
-# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-# endif
-#endif
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-#if 0
-static void flash_get_offsets (ulong base, flash_info_t *info);
-#endif /* 0 */
-
-/*flash command address offsets*/
-
-#if 0
-#define ADDR0 (0x555)
-#define ADDR1 (0x2AA)
-#define ADDR3 (0x001)
-#else
-#define ADDR0 (0xAAA)
-#define ADDR1 (0x555)
-#define ADDR3 (0x001)
-#endif
-
-#define FLASH_WORD_SIZE unsigned char
-
-/*-----------------------------------------------------------------------
- */
-
-#if 0
-static int byte_parity_odd(unsigned char x) __attribute__ ((const));
-#endif /* 0 */
-static unsigned long flash_id(unsigned char mfct, unsigned char chip) __attribute__ ((const));
-
-typedef struct
-{
- FLASH_WORD_SIZE extval;
- unsigned short intval;
-} map_entry;
-
-#if 0
-static int
-byte_parity_odd(unsigned char x)
-{
- x ^= x >> 4;
- x ^= x >> 2;
- x ^= x >> 1;
- return (x & 0x1) != 0;
-}
-#endif /* 0 */
-
-
-static unsigned long
-flash_id(unsigned char mfct, unsigned char chip)
-{
- static const map_entry mfct_map[] =
- {
- {(FLASH_WORD_SIZE) AMD_MANUFACT, (unsigned short) ((unsigned long) FLASH_MAN_AMD >> 16)},
- {(FLASH_WORD_SIZE) FUJ_MANUFACT, (unsigned short) ((unsigned long) FLASH_MAN_FUJ >> 16)},
- {(FLASH_WORD_SIZE) STM_MANUFACT, (unsigned short) ((unsigned long) FLASH_MAN_STM >> 16)},
- {(FLASH_WORD_SIZE) MT_MANUFACT, (unsigned short) ((unsigned long) FLASH_MAN_MT >> 16)},
- {(FLASH_WORD_SIZE) INTEL_MANUFACT,(unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)},
- {(FLASH_WORD_SIZE) INTEL_ALT_MANU,(unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)}
- };
-
- static const map_entry chip_map[] =
- {
- {AMD_ID_F040B, FLASH_AM040},
- {(FLASH_WORD_SIZE) STM_ID_x800AB, FLASH_STM800AB}
- };
-
- const map_entry *p;
- unsigned long result = FLASH_UNKNOWN;
-
- /* find chip id */
- for(p = &chip_map[0]; p < &chip_map[sizeof chip_map / sizeof chip_map[0]]; p++)
- if(p->extval == chip)
- {
- result = FLASH_VENDMASK | p->intval;
- break;
- }
-
- /* find vendor id */
- for(p = &mfct_map[0]; p < &mfct_map[sizeof mfct_map / sizeof mfct_map[0]]; p++)
- if(p->extval == mfct)
- {
- result &= ~FLASH_VENDMASK;
- result |= (unsigned long) p->intval << 16;
- break;
- }
-
- return result;
-}
-
-
-unsigned long
-flash_init(void)
-{
- unsigned long i;
- unsigned char j;
- static const ulong flash_banks[] = CONFIG_SYS_FLASH_BANKS;
-
- /* Init: no FLASHes known */
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
- {
- flash_info_t * const pflinfo = &flash_info[i];
- pflinfo->flash_id = FLASH_UNKNOWN;
- pflinfo->size = 0;
- pflinfo->sector_count = 0;
- }
-
- /* Enable writes to Sandpoint flash */
- {
- register unsigned char temp;
- CONFIG_READ_BYTE(CONFIG_SYS_WINBOND_ISA_CFG_ADDR + WINBOND_CSCR, temp);
- temp &= ~0x20; /* clear BIOSWP bit */
- CONFIG_WRITE_BYTE(CONFIG_SYS_WINBOND_ISA_CFG_ADDR + WINBOND_CSCR, temp);
- }
-
- for(i = 0; i < sizeof flash_banks / sizeof flash_banks[0]; i++)
- {
- flash_info_t * const pflinfo = &flash_info[i];
- const unsigned long base_address = flash_banks[i];
- volatile FLASH_WORD_SIZE * const flash = (FLASH_WORD_SIZE *) base_address;
-#if 0
- volatile FLASH_WORD_SIZE * addr2;
-#endif
-#if 0
- /* write autoselect sequence */
- flash[0x5555] = 0xaa;
- flash[0x2aaa] = 0x55;
- flash[0x5555] = 0x90;
-#else
- flash[0xAAA << (3 * i)] = 0xaa;
- flash[0x555 << (3 * i)] = 0x55;
- flash[0xAAA << (3 * i)] = 0x90;
-#endif
- __asm__ __volatile__("sync");
-
-#if 0
- pflinfo->flash_id = flash_id(flash[0x0], flash[0x1]);
-#else
- pflinfo->flash_id = flash_id(flash[0x0], flash[0x2 + 14 * i]);
-#endif
-
- switch(pflinfo->flash_id & FLASH_TYPEMASK)
- {
- case FLASH_AM040:
- pflinfo->size = 0x00080000;
- pflinfo->sector_count = 8;
- for(j = 0; j < 8; j++)
- {
- pflinfo->start[j] = base_address + 0x00010000 * j;
- pflinfo->protect[j] = flash[(j << 16) | 0x2];
- }
- break;
- case FLASH_STM800AB:
- pflinfo->size = 0x00100000;
- pflinfo->sector_count = 19;
- pflinfo->start[0] = base_address;
- pflinfo->start[1] = base_address + 0x4000;
- pflinfo->start[2] = base_address + 0x6000;
- pflinfo->start[3] = base_address + 0x8000;
- for(j = 1; j < 16; j++)
- {
- pflinfo->start[j+3] = base_address + 0x00010000 * j;
- }
-#if 0
- /* check for protected sectors */
- for (j = 0; j < pflinfo->sector_count; j++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr2 = (volatile FLASH_WORD_SIZE *)(pflinfo->start[j]);
- if (pflinfo->flash_id & FLASH_MAN_SST)
- pflinfo->protect[j] = 0;
- else
- pflinfo->protect[j] = addr2[2] & 1;
- }
-#endif
- break;
- }
- /* Protect monitor and environment sectors
- */
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
- &flash_info[0]);
-#endif
-
- /* reset device to read mode */
- flash[0x0000] = 0xf0;
- __asm__ __volatile__("sync");
- }
-
- return flash_info[0].size + flash_info[1].size;
-}
-
-#if 0
-static void
-flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_MAN_SST)
- {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- }
- else
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
-
-}
-#endif /* 0 */
-
-/*-----------------------------------------------------------------------
- */
-void
-flash_print_info(flash_info_t *info)
-{
- static const char unk[] = "Unknown";
- const char *mfct = unk, *type = unk;
- unsigned int i;
-
- if(info->flash_id != FLASH_UNKNOWN)
- {
- switch(info->flash_id & FLASH_VENDMASK)
- {
- case FLASH_MAN_AMD: mfct = "AMD"; break;
- case FLASH_MAN_FUJ: mfct = "FUJITSU"; break;
- case FLASH_MAN_STM: mfct = "STM"; break;
- case FLASH_MAN_SST: mfct = "SST"; break;
- case FLASH_MAN_BM: mfct = "Bright Microelectonics"; break;
- case FLASH_MAN_INTEL: mfct = "Intel"; break;
- }
-
- switch(info->flash_id & FLASH_TYPEMASK)
- {
- case FLASH_AM040: type = "AM29F040B (512K * 8, uniform sector size)"; break;
- case FLASH_AM400B: type = "AM29LV400B (4 Mbit, bottom boot sect)"; break;
- case FLASH_AM400T: type = "AM29LV400T (4 Mbit, top boot sector)"; break;
- case FLASH_AM800B: type = "AM29LV800B (8 Mbit, bottom boot sect)"; break;
- case FLASH_AM800T: type = "AM29LV800T (8 Mbit, top boot sector)"; break;
- case FLASH_AM160T: type = "AM29LV160T (16 Mbit, top boot sector)"; break;
- case FLASH_AM320B: type = "AM29LV320B (32 Mbit, bottom boot sect)"; break;
- case FLASH_AM320T: type = "AM29LV320T (32 Mbit, top boot sector)"; break;
- case FLASH_STM800AB: type = "M29W800AB (8 Mbit, bottom boot sect)"; break;
- case FLASH_SST800A: type = "SST39LF/VF800 (8 Mbit, uniform sector size)"; break;
- case FLASH_SST160A: type = "SST39LF/VF160 (16 Mbit, uniform sector size)"; break;
- }
- }
-
- printf(
- "\n Brand: %s Type: %s\n"
- " Size: %lu KB in %d Sectors\n",
- mfct,
- type,
- info->size >> 10,
- info->sector_count
- );
-
- printf (" Sector Start Addresses:");
-
- for (i = 0; i < info->sector_count; i++)
- {
- unsigned long size;
- unsigned int erased;
- unsigned long * flash = (unsigned long *) info->start[i];
-
- /*
- * Check if whole sector is erased
- */
- size =
- (i != (info->sector_count - 1)) ?
- (info->start[i + 1] - info->start[i]) >> 2 :
- (info->start[0] + info->size - info->start[i]) >> 2;
-
- for(
- flash = (unsigned long *) info->start[i], erased = 1;
- (flash != (unsigned long *) info->start[i] + size) && erased;
- flash++
- )
- erased = *flash == ~0x0UL;
-
- printf(
- "%s %08lX %s %s",
- (i % 5) ? "" : "\n ",
- info->start[i],
- erased ? "E" : " ",
- info->protect[i] ? "RO" : " "
- );
- }
-
- puts("\n");
- return;
-}
-
-#if 0
-
-/*
- * The following code cannot be run from FLASH!
- */
-ulong
-flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
- FLASH_WORD_SIZE value;
- ulong base = (ulong)addr;
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
-
- printf("flash_get_size: \n");
- /* Write auto select command: read Manufacturer ID */
- eieio();
- addr2[ADDR0] = (FLASH_WORD_SIZE)0xAA;
- addr2[ADDR1] = (FLASH_WORD_SIZE)0x55;
- addr2[ADDR0] = (FLASH_WORD_SIZE)0x90;
- value = addr2[0];
-
- switch (value) {
- case (FLASH_WORD_SIZE)AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case (FLASH_WORD_SIZE)FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case (FLASH_WORD_SIZE)SST_MANUFACT:
- info->flash_id = FLASH_MAN_SST;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
- printf("recognised manufacturer");
-
- value = addr2[ADDR3]; /* device ID */
- debug ("\ndev_code=%x\n", value);
-
- switch (value) {
- case (FLASH_WORD_SIZE)AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (FLASH_WORD_SIZE)SST_ID_xF800A:
- info->flash_id += FLASH_SST800A;
- info->sector_count = 16;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE)SST_ID_xF160A:
- info->flash_id += FLASH_SST160A;
- info->sector_count = 32;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- printf("flash id %lx; sector count %x, size %lx\n", info->flash_id,info->sector_count,info->size);
- /* set up sector start address table */
- if (info->flash_id & FLASH_MAN_SST)
- {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- }
- else
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
- addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
- if (info->flash_id & FLASH_MAN_SST)
- info->protect[i] = 0;
- else
- info->protect[i] = addr2[2] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- addr2 = (FLASH_WORD_SIZE *)info->start[0];
- *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
- }
-
- return (info->size);
-}
-
-#endif
-
-
-int
-flash_erase(flash_info_t *info, int s_first, int s_last)
-{
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
- unsigned char sh8b;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP))) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Check the ROM CS */
- if ((info->start[0] >= ROM_CS1_START) && (info->start[0] < ROM_CS0_START))
- sh8b = 3;
- else
- sh8b = 0;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (FLASH_WORD_SIZE *)(info->start[0] + (
- (info->start[sect] - info->start[0]) << sh8b));
- if (info->flash_id & FLASH_MAN_SST)
- {
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
- addr[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
- udelay(30000); /* wait 30 ms */
- }
- else
- addr[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (FLASH_WORD_SIZE *)(info->start[0] + (
- (info->start[l_sect] - info->start[0]) << sh8b));
- while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- serial_putc ('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (FLASH_WORD_SIZE *)info->start[0];
- addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)info->start[0];
- volatile FLASH_WORD_SIZE *dest2;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data;
- ulong start;
- int flag;
- int i;
- unsigned char sh8b;
-
- /* Check the ROM CS */
- if ((info->start[0] >= ROM_CS1_START) && (info->start[0] < ROM_CS0_START))
- sh8b = 3;
- else
- sh8b = 0;
-
- dest2 = (FLASH_WORD_SIZE *)(((dest - info->start[0]) << sh8b) +
- info->start[0]);
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest2 & (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++)
- {
- addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr2[ADDR1 << sh8b] = (FLASH_WORD_SIZE)0x00550055;
- addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE)0x00A000A0;
-
- dest2[i << sh8b] = data2[i];
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((dest2[i << sh8b] & (FLASH_WORD_SIZE)0x00800080) !=
- (data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- }
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/sandpoint/sandpoint.c b/board/sandpoint/sandpoint.c
deleted file mode 100644
index 16237bd..0000000
--- a/board/sandpoint/sandpoint.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * (C) Copyright 2000
- * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <pci.h>
-#include <netdev.h>
-
-int checkboard (void)
-{
- /*TODO: Check processor type */
-
- puts ( "Board: Sandpoint "
-#ifdef CONFIG_MPC8240
- "8240"
-#endif
-#ifdef CONFIG_MPC8245
- "8245"
-#endif
- " Unity ##Test not implemented yet##\n");
- return 0;
-}
-
-#if 0 /* NOT USED */
-int checkflash (void)
-{
- /* TODO: XXX XXX XXX */
- printf ("## Test not implemented yet ##\n");
-
- return (0);
-}
-#endif
-
-phys_size_t initdram (int board_type)
-{
- long size;
- long new_bank0_end;
- long mear1;
- long emear1;
-
- size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
-
- new_bank0_end = size - 1;
- mear1 = mpc824x_mpc107_getreg(MEAR1);
- emear1 = mpc824x_mpc107_getreg(EMEAR1);
- mear1 = (mear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
- emear1 = (emear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
- mpc824x_mpc107_setreg(MEAR1, mear1);
- mpc824x_mpc107_setreg(EMEAR1, emear1);
-
- return (size);
-}
-
-/*
- * Initialize PCI Devices, report devices found.
- */
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_sandpoint_config_table[] = {
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x10, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
- PCI_ENET1_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
- { }
-};
-#endif
-
-struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
- config_table: pci_sandpoint_config_table,
-#endif
-};
-
-void pci_init_board(void)
-{
- pci_mpc824x_init(&hose);
-}
-
-int board_eth_init(bd_t *bis)
-{
- return pci_eth_init(bis);
-}
diff --git a/board/sandpoint/u-boot.lds b/board/sandpoint/u-boot.lds
deleted file mode 100644
index cd9f07c..0000000
--- a/board/sandpoint/u-boot.lds
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * (C) Copyright 2001-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc824x/start.o (.text*)
- *(.text.v*printf)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.ppcenv*)
-
- *(.text*)
- . = ALIGN(16);
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/utx8245/Kconfig b/board/utx8245/Kconfig
deleted file mode 100644
index aec0eb9..0000000
--- a/board/utx8245/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_UTX8245
-
-config SYS_BOARD
- default "utx8245"
-
-config SYS_CONFIG_NAME
- default "utx8245"
-
-endif
diff --git a/board/utx8245/MAINTAINERS b/board/utx8245/MAINTAINERS
deleted file mode 100644
index bed69c8..0000000
--- a/board/utx8245/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-UTX8245 BOARD
-M: Greg Allen <gallen@arlut.utexas.edu>
-S: Maintained
-F: board/utx8245/
-F: include/configs/utx8245.h
-F: configs/utx8245_defconfig
diff --git a/board/utx8245/Makefile b/board/utx8245/Makefile
deleted file mode 100644
index f12e545..0000000
--- a/board/utx8245/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2002
-# Gregory E. Allen, gallen@arlut.utexas.edu
-# Matthew E. Karger, karger@arlut.utexas.edu
-# Applied Research Laboratories, The University of Texas at Austin
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = utx8245.o flash.o
diff --git a/board/utx8245/flash.c b/board/utx8245/flash.c
deleted file mode 100644
index 1dfcb41..0000000
--- a/board/utx8245/flash.c
+++ /dev/null
@@ -1,544 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * Gregory E. Allen, gallen@arlut.utexas.edu
- * Matthew E. Karger, karger@arlut.utexas.edu
- * Applied Research Laboratories, The University of Texas at Austin
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-
-#define ROM_CS0_START 0xFF800000
-#define ROM_CS1_START 0xFF000000
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef CONFIG_ENV_ADDR
-# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef CONFIG_ENV_SIZE
-# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef CONFIG_ENV_SECT_SIZE
-# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-# endif
-#endif
-
-#define FLASH_BANK_SIZE ((uint)(16 * 1024 * 1024)) /* max 16Mbyte */
-#define MAIN_SECT_SIZE 0x10000
-#define SECT_SIZE_32KB 0x8000
-#define SECT_SIZE_8KB 0x2000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-static int write_word (flash_info_t * info, ulong dest, ulong data);
-#if 0
-static void write_via_fpu (vu_long * addr, ulong * data);
-#endif
-static __inline__ unsigned long get_msr (void);
-static __inline__ void set_msr (unsigned long msr);
-
-/*flash command address offsets*/
-#define ADDR0 (0x555)
-#define ADDR1 (0xAAA)
-#define ADDR3 (0x001)
-
-#define FLASH_WORD_SIZE unsigned char
-
-/*---------------------------------------------------------------------*/
-/*#define DEBUG_FLASH 1 */
-
-/*---------------------------------------------------------------------*/
-
-unsigned long flash_init (void)
-{
- int i; /* flash bank counter */
- int j; /* flash device sector counter */
- int k; /* flash size calculation loop counter */
- int N; /* pow(2,N) is flash size, but we don't have <math.h> */
- ulong total_size = 0, device_size = 1;
- unsigned char manuf_id, device_id;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- vu_char *addr = (vu_char *) (CONFIG_SYS_FLASH_BASE + i * FLASH_BANK_SIZE);
-
- addr[0x555] = 0xAA; /* get manuf/device info command */
- addr[0x2AA] = 0x55; /* 3-cycle command */
- addr[0x555] = 0x90;
-
- manuf_id = addr[0]; /* read back manuf/device info */
- device_id = addr[1];
-
- addr[0x55] = 0x98; /* CFI command */
- N = addr[0x27]; /* read back device_size = pow(2,N) */
-
- for (k = 0; k < N; k++) /* calculate device_size = pow(2,N) */
- device_size *= 2;
-
- flash_info[i].size = device_size;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-
-#if defined DEBUG_FLASH
- printf ("manuf_id = %x, device_id = %x\n", manuf_id, device_id);
-#endif
- /* find out what kind of flash we are using */
- if ((manuf_id == (uchar) (AMD_MANUFACT))
- && (device_id == AMD_ID_LV033C)) {
- flash_info[i].flash_id =
- ((FLASH_MAN_AMD & FLASH_VENDMASK) << 16) |
- (FLASH_AM033C & FLASH_TYPEMASK);
-
- /* set individual sector start addresses */
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] =
- (CONFIG_SYS_FLASH_BASE + i * FLASH_BANK_SIZE +
- j * MAIN_SECT_SIZE);
- }
- }
-
- else if ((manuf_id == (uchar) (AMD_MANUFACT)) &&
- (device_id == AMD_ID_LV116DT)) {
- flash_info[i].flash_id =
- ((FLASH_MAN_AMD & FLASH_VENDMASK) << 16) |
- (FLASH_AM160T & FLASH_TYPEMASK);
-
- /* set individual sector start addresses */
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] =
- (CONFIG_SYS_FLASH_BASE + i * FLASH_BANK_SIZE +
- j * MAIN_SECT_SIZE);
-
- if (j < (CONFIG_SYS_MAX_FLASH_SECT - 3)) {
- flash_info[i].start[j] =
- (CONFIG_SYS_FLASH_BASE + i * FLASH_BANK_SIZE +
- j * MAIN_SECT_SIZE);
- } else if (j == (CONFIG_SYS_MAX_FLASH_SECT - 3)) {
- flash_info[i].start[j] =
- (flash_info[i].start[j - 1] + SECT_SIZE_32KB);
-
- } else {
- flash_info[i].start[j] =
- (flash_info[i].start[j - 1] + SECT_SIZE_8KB);
- }
- }
- }
-
- else {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- addr[0] = 0xFF;
- goto Done;
- }
-
-#if defined DEBUG_FLASH
- printf ("flash_id = 0x%08lX\n", flash_info[i].flash_id);
-#endif
-
- addr[0] = 0xFF;
-
- memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-
- total_size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- flash_protect (FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
- flash_protect (FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-#endif
-
- Done:
- return total_size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- static const char unk[] = "Unknown";
- const char *mfct = unk, *type = unk;
- unsigned int i;
-
- if (info->flash_id != FLASH_UNKNOWN) {
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- mfct = "AMD";
- break;
- case FLASH_MAN_FUJ:
- mfct = "FUJITSU";
- break;
- case FLASH_MAN_STM:
- mfct = "STM";
- break;
- case FLASH_MAN_SST:
- mfct = "SST";
- break;
- case FLASH_MAN_BM:
- mfct = "Bright Microelectonics";
- break;
- case FLASH_MAN_INTEL:
- mfct = "Intel";
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM033C:
- type = "AM29LV033C (32 Mbit, uniform sector size)";
- break;
- case FLASH_AM160T:
- type = "AM29LV160T (16 Mbit, top boot sector)";
- break;
- case FLASH_AM040:
- type = "AM29F040B (512K * 8, uniform sector size)";
- break;
- case FLASH_AM400B:
- type = "AM29LV400B (4 Mbit, bottom boot sect)";
- break;
- case FLASH_AM400T:
- type = "AM29LV400T (4 Mbit, top boot sector)";
- break;
- case FLASH_AM800B:
- type = "AM29LV800B (8 Mbit, bottom boot sect)";
- break;
- case FLASH_AM800T:
- type = "AM29LV800T (8 Mbit, top boot sector)";
- break;
- case FLASH_AM320B:
- type = "AM29LV320B (32 Mbit, bottom boot sect)";
- break;
- case FLASH_AM320T:
- type = "AM29LV320T (32 Mbit, top boot sector)";
- break;
- case FLASH_STM800AB:
- type = "M29W800AB (8 Mbit, bottom boot sect)";
- break;
- case FLASH_SST800A:
- type = "SST39LF/VF800 (8 Mbit, uniform sector size)";
- break;
- case FLASH_SST160A:
- type = "SST39LF/VF160 (16 Mbit, uniform sector size)";
- break;
- }
- }
-
- printf ("\n Brand: %s Type: %s\n"
- " Size: %lu KB in %d Sectors\n",
- mfct, type, info->size >> 10, info->sector_count);
-
- printf (" Sector Start Addresses:");
-
- for (i = 0; i < info->sector_count; i++) {
- unsigned long size;
- unsigned int erased;
- unsigned long *flash = (unsigned long *) info->start[i];
-
- /*
- * Check if whole sector is erased
- */
- size = (i != (info->sector_count - 1)) ?
- (info->start[i + 1] - info->start[i]) >> 2 :
- (info->start[0] + info->size - info->start[i]) >> 2;
-
- for (flash = (unsigned long *) info->start[i], erased = 1;
- (flash != (unsigned long *) info->start[i] + size) && erased;
- flash++)
- erased = *flash == ~0x0UL;
-
- printf ("%s %08lX %s %s",
- (i % 5) ? "" : "\n ",
- info->start[i],
- erased ? "E" : " ", info->protect[i] ? "RO" : " ");
- }
-
- puts ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
- unsigned char sh8b;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP))) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Check the ROM CS */
- if ((info->start[0] >= ROM_CS1_START)
- && (info->start[0] < ROM_CS0_START))
- sh8b = 3;
- else
- sh8b = 0;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00800080;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (FLASH_WORD_SIZE *) (info->start[0] + ((info->
- start[sect] -
- info->
- start[0]) <<
- sh8b));
-
- if (info->flash_id & FLASH_MAN_SST) {
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00800080;
- addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055;
- addr[0] = (FLASH_WORD_SIZE) 0x00500050; /* block erase */
- udelay (30000); /* wait 30 ms */
- } else {
- addr[0] = (FLASH_WORD_SIZE) 0x00300030; /* sector erase */
- }
-
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (FLASH_WORD_SIZE *) (info->start[0] + ((info->start[l_sect] -
- info->
- start[0]) << sh8b));
- while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
- (FLASH_WORD_SIZE) 0x00800080) {
- if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- serial_putc ('.');
- last = now;
- }
- }
-
- DONE:
- /* reset to read mode */
- addr = (FLASH_WORD_SIZE *) info->start[0];
- addr[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < 4 && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i = 0; i < 4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < 4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- return (write_word (info, wp, data));
-}
-
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) info->start[0];
- volatile FLASH_WORD_SIZE *dest2;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
- ulong start;
- int flag;
- int i;
- unsigned char sh8b;
-
- /* Check the ROM CS */
- if ((info->start[0] >= ROM_CS1_START)
- && (info->start[0] < ROM_CS0_START))
- sh8b = 3;
- else
- sh8b = 0;
-
- dest2 = (FLASH_WORD_SIZE *) (((dest - info->start[0]) << sh8b) +
- info->start[0]);
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest2 & (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
- addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00A000A0;
-
- dest2[i << sh8b] = data2[i];
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((dest2[i << sh8b] & (FLASH_WORD_SIZE) 0x00800080) !=
- (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- }
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
-#if 0
-static void write_via_fpu (vu_long * addr, ulong * data)
-{
- __asm__ __volatile__ ("lfd 1, 0(%0)"::"r" (data));
- __asm__ __volatile__ ("stfd 1, 0(%0)"::"r" (addr));
-}
-#endif
-
-/*-----------------------------------------------------------------------
- */
-static __inline__ unsigned long get_msr (void)
-{
- unsigned long msr;
-
- __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
-
- return msr;
-}
-
-static __inline__ void set_msr (unsigned long msr)
-{
- __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
-}
diff --git a/board/utx8245/utx8245.c b/board/utx8245/utx8245.c
deleted file mode 100644
index 69d19e3..0000000
--- a/board/utx8245/utx8245.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * (C) Copyright 2001
- * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
- *
- * (C) Copyright 2002
- * Gregory E. Allen, gallen@arlut.utexas.edu
- * Matthew E. Karger, karger@arlut.utexas.edu
- * Applied Research Laboratories, The University of Texas at Austin
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-#include <pci.h>
-#include <netdev.h>
-
-#define SAVE_SZ 32
-
-
-int checkboard(void)
-{
- ulong busfreq = get_bus_freq(0);
- char buf[32];
-
- printf("Board: UTX8245 Local Bus at %s MHz\n", strmhz(buf, busfreq));
- return 0;
-}
-
-
-phys_size_t initdram(int board_type)
-{
- long size;
- long new_bank0_end;
- long new_bank1_end;
- long mear1;
- long emear1;
-
- size = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
-
- new_bank0_end = size/2 - 1;
- new_bank1_end = size - 1;
- mear1 = mpc824x_mpc107_getreg(MEAR1);
- emear1 = mpc824x_mpc107_getreg(EMEAR1);
-
- mear1 = (mear1 & 0xFFFF0000) |
- ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
- ((new_bank1_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT << 8);
- emear1 = (emear1 & 0xFFFF0000) |
- ((new_bank0_end & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
- ((new_bank1_end & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT << 8);
-
- mpc824x_mpc107_setreg(MEAR1, mear1);
- mpc824x_mpc107_setreg(EMEAR1, emear1);
-
- return (size);
-}
-
-
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-static struct pci_config_table pci_utx8245_config_table[] = {
-#ifndef CONFIG_PCI_PNP
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0C, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0B, PCI_ANY_ID,
- pci_cfgfunc_config_device, { PCI_FIREWIRE_IOADDR,
- PCI_FIREWIRE_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
-#endif /*CONFIG_PCI_PNP*/
- { }
-};
-
-
-static void pci_utx8245_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
-{
- if (PCI_DEV(dev) == 11)
- /* assign serial interrupt line 9 (int25) to FireWire */
- pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 25);
-
- else if (PCI_DEV(dev) == 12)
- /* assign serial interrupt line 8 (int24) to Ethernet */
- pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 24);
-
- else if (PCI_DEV(dev) == 14)
- /* assign serial interrupt line 0 (int16) to PMC slot 0 */
- pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 16);
-
- else if (PCI_DEV(dev) == 15)
- /* assign serial interrupt line 1 (int17) to PMC slot 1 */
- pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 17);
-}
-
-static struct pci_controller utx8245_hose = {
-#ifndef CONFIG_PCI_PNP
- config_table: pci_utx8245_config_table,
- fixup_irq: pci_utx8245_fixup_irq,
- write_byte: pci_hose_write_config_byte
-#endif /*CONFIG_PCI_PNP*/
-};
-
-void pci_init_board (void)
-{
- pci_mpc824x_init(&utx8245_hose);
-
- icache_enable();
-}
-
-int board_eth_init(bd_t *bis)
-{
- return pci_eth_init(bis);
-}
diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c
index ddc24be..682d18f 100644
--- a/common/cmd_pcmcia.c
+++ b/common/cmd_pcmcia.c
@@ -331,11 +331,8 @@ int check_ide_device (int slot)
ide_devices_found |= (1 << slot);
-#if CONFIG_CPC45
-#else
/* set I/O area in config reg -> only valid for ARGOSY D5!!! */
*((uchar *)(addr + config_base)) = 1;
-#endif
#if 0
printf("\n## Config_base = %04x ###\n", config_base);
printf("Configuration Option Register: %02x @ %x\n", readb(addr + config_base), addr + config_base);
diff --git a/configs/A3000_defconfig b/configs/A3000_defconfig
deleted file mode 100644
index e1923de..0000000
--- a/configs/A3000_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC824X=y
-CONFIG_TARGET_A3000=y
diff --git a/configs/CPC45_ROMBOOT_defconfig b/configs/CPC45_ROMBOOT_defconfig
deleted file mode 100644
index 4aae7f6..0000000
--- a/configs/CPC45_ROMBOOT_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_SYS_EXTRA_OPTIONS="BOOT_ROM"
-CONFIG_PPC=y
-CONFIG_MPC824X=y
-CONFIG_TARGET_CPC45=y
diff --git a/configs/CPC45_defconfig b/configs/CPC45_defconfig
deleted file mode 100644
index 77ae66c..0000000
--- a/configs/CPC45_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC824X=y
-CONFIG_TARGET_CPC45=y
diff --git a/configs/CU824_defconfig b/configs/CU824_defconfig
deleted file mode 100644
index 0f22188..0000000
--- a/configs/CU824_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC824X=y
-CONFIG_TARGET_CU824=y
diff --git a/configs/MUSENKI_defconfig b/configs/MUSENKI_defconfig
deleted file mode 100644
index 586364c..0000000
--- a/configs/MUSENKI_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC824X=y
-CONFIG_TARGET_MUSENKI=y
diff --git a/configs/MVBLUE_defconfig b/configs/MVBLUE_defconfig
deleted file mode 100644
index f979983..0000000
--- a/configs/MVBLUE_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC824X=y
-CONFIG_TARGET_MVBLUE=y
diff --git a/configs/Sandpoint8240_defconfig b/configs/Sandpoint8240_defconfig
deleted file mode 100644
index 332e4c0..0000000
--- a/configs/Sandpoint8240_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC824X=y
-CONFIG_TARGET_SANDPOINT8240=y
diff --git a/configs/Sandpoint8245_defconfig b/configs/Sandpoint8245_defconfig
deleted file mode 100644
index b36757c..0000000
--- a/configs/Sandpoint8245_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC824X=y
-CONFIG_TARGET_SANDPOINT8245=y
diff --git a/configs/eXalion_defconfig b/configs/eXalion_defconfig
deleted file mode 100644
index 9d7e090..0000000
--- a/configs/eXalion_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC824X=y
-CONFIG_TARGET_EXALION=y
diff --git a/configs/utx8245_defconfig b/configs/utx8245_defconfig
deleted file mode 100644
index c2107cc..0000000
--- a/configs/utx8245_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC824X=y
-CONFIG_TARGET_UTX8245=y
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 5df0664..5d2875c 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,6 +12,15 @@ The list should be sorted in reverse chronological order.
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
+A3000 powerpc mpc824x - -
+CPC45 powerpc mpc824x - - Josef Wagner <Wagner@Microsys.de>
+CU824 powerpc mpc824x - - Wolfgang Denk <wd@denx.de>
+eXalion powerpc mpc824x - - Torsten Demke <torsten.demke@fci.com>
+MVBLUE powerpc mpc824x - -
+MUSENKI powerpc mpc824x - - Jim Thompson <jim@musenki.com>
+Sandpoint8240 powerpc mpc824x - - Wolfgang Denk <wd@denx.de>
+Sandpoint8245 powerpc mpc824x - - Jim Thompson <jim@musenki.com>
+utx8245 powerpc mpc824x - - Greg Allen <gallen@arlut.utexas.edu>
atc powerpc mpc8260 - - Wolfgang Denk <wd@denx.de>
CPU86 powerpc mpc8260 - - Wolfgang Denk <wd@denx.de>
CPU87 powerpc mpc8260 - -
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 91821f4..c506f79 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -5,7 +5,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_I82365) += i82365.o
obj-$(CONFIG_8xx) += mpc8xx_pcmcia.o
obj-$(CONFIG_IDE_TI_CARDBUS) += ti_pci1410a.o
obj-y += tqm8xx_pcmcia.o
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
deleted file mode 100644
index 84a3d2e..0000000
--- a/drivers/pcmcia/i82365.c
+++ /dev/null
@@ -1,989 +0,0 @@
-/*
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- ********************************************************************
- *
- * Lots of code copied from:
- *
- * i82365.c 1.352 - Linux driver for Intel 82365 and compatible
- * PC Card controllers, and Yenta-compatible PCI-to-CardBus controllers.
- * (C) 1999 David A. Hinds <dahinds@users.sourceforge.net>
- */
-
-#include <common.h>
-
-#include <command.h>
-#include <pci.h>
-#include <pcmcia.h>
-#include <asm/io.h>
-
-#include <pcmcia/ss.h>
-#include <pcmcia/i82365.h>
-#include <pcmcia/yenta.h>
-#ifdef CONFIG_CPC45
-#include <pcmcia/cirrus.h>
-#else
-#include <pcmcia/ti113x.h>
-#endif
-
-static struct pci_device_id supported[] = {
-#ifdef CONFIG_CPC45
- {PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_6729},
-#else
- {PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1510},
-#endif
- {0, 0}
-};
-
-#define CYCLE_TIME 120
-
-#ifdef CONFIG_CPC45
-extern int SPD67290Init (void);
-#endif
-
-#ifdef DEBUG
-static void i82365_dump_regions (pci_dev_t dev);
-#endif
-
-typedef struct socket_info_t {
- pci_dev_t dev;
- u_short bcr;
- u_char pci_lat, cb_lat, sub_bus, cache;
- u_int cb_phys;
-
- socket_cap_t cap;
- u_short type;
- u_int flags;
-#ifdef CONFIG_CPC45
- cirrus_state_t c_state;
-#else
- ti113x_state_t state;
-#endif
-} socket_info_t;
-
-#ifdef CONFIG_CPC45
-/* These definitions must match the pcic table! */
-typedef enum pcic_id {
- IS_PD6710, IS_PD672X, IS_VT83C469
-} pcic_id;
-
-typedef struct pcic_t {
- char *name;
-} pcic_t;
-
-static pcic_t pcic[] = {
- {" Cirrus PD6710: "},
- {" Cirrus PD672x: "},
- {" VIA VT83C469: "},
-};
-#endif
-
-static socket_info_t socket;
-static socket_state_t state;
-static struct pccard_mem_map mem;
-static struct pccard_io_map io;
-
-/*====================================================================*/
-
-/* Some PCI shortcuts */
-
-static int pci_readb (socket_info_t * s, int r, u_char * v)
-{
- return pci_read_config_byte (s->dev, r, v);
-}
-static int pci_writeb (socket_info_t * s, int r, u_char v)
-{
- return pci_write_config_byte (s->dev, r, v);
-}
-static int pci_readw (socket_info_t * s, int r, u_short * v)
-{
- return pci_read_config_word (s->dev, r, v);
-}
-static int pci_writew (socket_info_t * s, int r, u_short v)
-{
- return pci_write_config_word (s->dev, r, v);
-}
-#ifndef CONFIG_CPC45
-static int pci_readl (socket_info_t * s, int r, u_int * v)
-{
- return pci_read_config_dword (s->dev, r, v);
-}
-static int pci_writel (socket_info_t * s, int r, u_int v)
-{
- return pci_write_config_dword (s->dev, r, v);
-}
-#endif /* !CONFIG_CPC45 */
-
-/*====================================================================*/
-
-#ifdef CONFIG_CPC45
-
-#define cb_readb(s) readb((s)->cb_phys + 1)
-#define cb_writeb(s, v) writeb(v, (s)->cb_phys)
-#define cb_writeb2(s, v) writeb(v, (s)->cb_phys + 1)
-#define cb_readl(s, r) readl((s)->cb_phys + (r))
-#define cb_writel(s, r, v) writel(v, (s)->cb_phys + (r))
-
-
-static u_char i365_get (socket_info_t * s, u_short reg)
-{
- u_char val;
-#ifdef CONFIG_PCMCIA_SLOT_A
- int slot = 0;
-#else
- int slot = 1;
-#endif
-
- val = I365_REG (slot, reg);
-
- cb_writeb (s, val);
- val = cb_readb (s);
-
- debug ("i365_get slot:%x reg: %x val: %x\n", slot, reg, val);
- return val;
-}
-
-static void i365_set (socket_info_t * s, u_short reg, u_char data)
-{
-#ifdef CONFIG_PCMCIA_SLOT_A
- int slot = 0;
-#else
- int slot = 1;
-#endif
- u_char val;
-
- val = I365_REG (slot, reg);
-
- cb_writeb (s, val);
- cb_writeb2 (s, data);
-
- debug ("i365_set slot:%x reg: %x data:%x\n", slot, reg, data);
-}
-
-#else /* ! CONFIG_CPC45 */
-
-#define cb_readb(s, r) readb((s)->cb_phys + (r))
-#define cb_readl(s, r) readl((s)->cb_phys + (r))
-#define cb_writeb(s, r, v) writeb(v, (s)->cb_phys + (r))
-#define cb_writel(s, r, v) writel(v, (s)->cb_phys + (r))
-
-static u_char i365_get (socket_info_t * s, u_short reg)
-{
- return cb_readb (s, 0x0800 + reg);
-}
-
-static void i365_set (socket_info_t * s, u_short reg, u_char data)
-{
- cb_writeb (s, 0x0800 + reg, data);
-}
-#endif /* CONFIG_CPC45 */
-
-static void i365_bset (socket_info_t * s, u_short reg, u_char mask)
-{
- i365_set (s, reg, i365_get (s, reg) | mask);
-}
-
-static void i365_bclr (socket_info_t * s, u_short reg, u_char mask)
-{
- i365_set (s, reg, i365_get (s, reg) & ~mask);
-}
-
-#if 0 /* not used */
-static void i365_bflip (socket_info_t * s, u_short reg, u_char mask, int b)
-{
- u_char d = i365_get (s, reg);
-
- i365_set (s, reg, (b) ? (d | mask) : (d & ~mask));
-}
-
-static u_short i365_get_pair (socket_info_t * s, u_short reg)
-{
- return (i365_get (s, reg) + (i365_get (s, reg + 1) << 8));
-}
-#endif /* not used */
-
-static void i365_set_pair (socket_info_t * s, u_short reg, u_short data)
-{
- i365_set (s, reg, data & 0xff);
- i365_set (s, reg + 1, data >> 8);
-}
-
-#ifdef CONFIG_CPC45
-/*======================================================================
-
- Code to save and restore global state information for Cirrus
- PD67xx controllers, and to set and report global configuration
- options.
-
-======================================================================*/
-
-#define flip(v,b,f) (v = ((f)<0) ? v : ((f) ? ((v)|(b)) : ((v)&(~b))))
-
-static void cirrus_get_state (socket_info_t * s)
-{
- int i;
- cirrus_state_t *p = &s->c_state;
-
- p->misc1 = i365_get (s, PD67_MISC_CTL_1);
- p->misc1 &= (PD67_MC1_MEDIA_ENA | PD67_MC1_INPACK_ENA);
- p->misc2 = i365_get (s, PD67_MISC_CTL_2);
- for (i = 0; i < 6; i++)
- p->timer[i] = i365_get (s, PD67_TIME_SETUP (0) + i);
-
-}
-
-static void cirrus_set_state (socket_info_t * s)
-{
- int i;
- u_char misc;
- cirrus_state_t *p = &s->c_state;
-
- misc = i365_get (s, PD67_MISC_CTL_2);
- i365_set (s, PD67_MISC_CTL_2, p->misc2);
- if (misc & PD67_MC2_SUSPEND)
- udelay (50000);
- misc = i365_get (s, PD67_MISC_CTL_1);
- misc &= ~(PD67_MC1_MEDIA_ENA | PD67_MC1_INPACK_ENA);
- i365_set (s, PD67_MISC_CTL_1, misc | p->misc1);
- for (i = 0; i < 6; i++)
- i365_set (s, PD67_TIME_SETUP (0) + i, p->timer[i]);
-}
-
-static u_int cirrus_set_opts (socket_info_t * s)
-{
- cirrus_state_t *p = &s->c_state;
- u_int mask = 0xffff;
- char buf[200] = {0};
-
- if (has_ring == -1)
- has_ring = 1;
- flip (p->misc2, PD67_MC2_IRQ15_RI, has_ring);
- flip (p->misc2, PD67_MC2_DYNAMIC_MODE, dynamic_mode);
-#if DEBUG
- if (p->misc2 & PD67_MC2_IRQ15_RI)
- strcat (buf, " [ring]");
- if (p->misc2 & PD67_MC2_DYNAMIC_MODE)
- strcat (buf, " [dyn mode]");
- if (p->misc1 & PD67_MC1_INPACK_ENA)
- strcat (buf, " [inpack]");
-#endif
-
- if (p->misc2 & PD67_MC2_IRQ15_RI)
- mask &= ~0x8000;
- if (has_led > 0) {
-#if DEBUG
- strcat (buf, " [led]");
-#endif
- mask &= ~0x1000;
- }
- if (has_dma > 0) {
-#if DEBUG
- strcat (buf, " [dma]");
-#endif
- mask &= ~0x0600;
- flip (p->misc2, PD67_MC2_FREQ_BYPASS, freq_bypass);
-#if DEBUG
- if (p->misc2 & PD67_MC2_FREQ_BYPASS)
- strcat (buf, " [freq bypass]");
-#endif
- }
-
- if (setup_time >= 0)
- p->timer[0] = p->timer[3] = setup_time;
- if (cmd_time > 0) {
- p->timer[1] = cmd_time;
- p->timer[4] = cmd_time * 2 + 4;
- }
- if (p->timer[1] == 0) {
- p->timer[1] = 6;
- p->timer[4] = 16;
- if (p->timer[0] == 0)
- p->timer[0] = p->timer[3] = 1;
- }
- if (recov_time >= 0)
- p->timer[2] = p->timer[5] = recov_time;
-
- debug ("i82365 Opt: %s [%d/%d/%d] [%d/%d/%d]\n",
- buf,
- p->timer[0], p->timer[1], p->timer[2],
- p->timer[3], p->timer[4], p->timer[5]);
-
- return mask;
-}
-
-#else /* !CONFIG_CPC45 */
-
-/*======================================================================
-
- Code to save and restore global state information for TI 1130 and
- TI 1131 controllers, and to set and report global configuration
- options.
-
-======================================================================*/
-
-static void ti113x_get_state (socket_info_t * s)
-{
- ti113x_state_t *p = &s->state;
-
- pci_readl (s, TI113X_SYSTEM_CONTROL, &p->sysctl);
- pci_readb (s, TI113X_CARD_CONTROL, &p->cardctl);
- pci_readb (s, TI113X_DEVICE_CONTROL, &p->devctl);
- pci_readb (s, TI1250_DIAGNOSTIC, &p->diag);
- pci_readl (s, TI12XX_IRQMUX, &p->irqmux);
-}
-
-static void ti113x_set_state (socket_info_t * s)
-{
- ti113x_state_t *p = &s->state;
-
- pci_writel (s, TI113X_SYSTEM_CONTROL, p->sysctl);
- pci_writeb (s, TI113X_CARD_CONTROL, p->cardctl);
- pci_writeb (s, TI113X_DEVICE_CONTROL, p->devctl);
- pci_writeb (s, TI1250_MULTIMEDIA_CTL, 0);
- pci_writeb (s, TI1250_DIAGNOSTIC, p->diag);
- pci_writel (s, TI12XX_IRQMUX, p->irqmux);
- i365_set_pair (s, TI113X_IO_OFFSET (0), 0);
- i365_set_pair (s, TI113X_IO_OFFSET (1), 0);
-}
-
-static u_int ti113x_set_opts (socket_info_t * s)
-{
- ti113x_state_t *p = &s->state;
- u_int mask = 0xffff;
-
- p->cardctl &= ~TI113X_CCR_ZVENABLE;
- p->cardctl |= TI113X_CCR_SPKROUTEN;
-
- return mask;
-}
-#endif /* CONFIG_CPC45 */
-
-/*======================================================================
-
- Routines to handle common CardBus options
-
-======================================================================*/
-
-/* Default settings for PCI command configuration register */
-#define CMD_DFLT (PCI_COMMAND_IO|PCI_COMMAND_MEMORY| \
- PCI_COMMAND_MASTER|PCI_COMMAND_WAIT)
-
-static void cb_get_state (socket_info_t * s)
-{
- pci_readb (s, PCI_CACHE_LINE_SIZE, &s->cache);
- pci_readb (s, PCI_LATENCY_TIMER, &s->pci_lat);
- pci_readb (s, CB_LATENCY_TIMER, &s->cb_lat);
- pci_readb (s, CB_CARDBUS_BUS, &s->cap.cardbus);
- pci_readb (s, CB_SUBORD_BUS, &s->sub_bus);
- pci_readw (s, CB_BRIDGE_CONTROL, &s->bcr);
-}
-
-static void cb_set_state (socket_info_t * s)
-{
-#ifndef CONFIG_CPC45
- pci_writel (s, CB_LEGACY_MODE_BASE, 0);
- pci_writel (s, PCI_BASE_ADDRESS_0, s->cb_phys);
-#endif
- pci_writew (s, PCI_COMMAND, CMD_DFLT);
- pci_writeb (s, PCI_CACHE_LINE_SIZE, s->cache);
- pci_writeb (s, PCI_LATENCY_TIMER, s->pci_lat);
- pci_writeb (s, CB_LATENCY_TIMER, s->cb_lat);
- pci_writeb (s, CB_CARDBUS_BUS, s->cap.cardbus);
- pci_writeb (s, CB_SUBORD_BUS, s->sub_bus);
- pci_writew (s, CB_BRIDGE_CONTROL, s->bcr);
-}
-
-static void cb_set_opts (socket_info_t * s)
-{
-#ifndef CONFIG_CPC45
- if (s->cache == 0)
- s->cache = 8;
- if (s->pci_lat == 0)
- s->pci_lat = 0xa8;
- if (s->cb_lat == 0)
- s->cb_lat = 0xb0;
-#endif
-}
-
-/*======================================================================
-
- Power control for Cardbus controllers: used both for 16-bit and
- Cardbus cards.
-
-======================================================================*/
-
-static int cb_set_power (socket_info_t * s, socket_state_t * state)
-{
- u_int reg = 0;
-
-#ifdef CONFIG_CPC45
-
- reg = I365_PWR_NORESET;
- if (state->flags & SS_PWR_AUTO)
- reg |= I365_PWR_AUTO;
- if (state->flags & SS_OUTPUT_ENA)
- reg |= I365_PWR_OUT;
- if (state->Vpp != 0) {
- if (state->Vpp == 120) {
- reg |= I365_VPP1_12V;
- puts (" 12V card found: ");
- } else if (state->Vpp == state->Vcc) {
- reg |= I365_VPP1_5V;
- } else {
- puts (" power not found: ");
- return -1;
- }
- }
- if (state->Vcc != 0) {
- reg |= I365_VCC_5V;
- if (state->Vcc == 33) {
- puts (" 3.3V card found: ");
- i365_bset (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
- } else if (state->Vcc == 50) {
- puts (" 5V card found: ");
- i365_bclr (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
- } else {
- puts (" power not found: ");
- return -1;
- }
- }
-
- if (reg != i365_get (s, I365_POWER)) {
- reg = (I365_PWR_OUT | I365_PWR_NORESET | I365_VCC_5V | I365_VPP1_5V);
- i365_set (s, I365_POWER, reg);
- }
-
-#else /* ! CONFIG_CPC45 */
-
- /* restart card voltage detection if it seems appropriate */
- if ((state->Vcc == 0) && (state->Vpp == 0) &&
- !(cb_readl (s, CB_SOCKET_STATE) & CB_SS_VSENSE))
- cb_writel (s, CB_SOCKET_FORCE, CB_SF_CVSTEST);
- switch (state->Vcc) {
- case 0:
- reg = 0;
- break;
- case 33:
- reg = CB_SC_VCC_3V;
- break;
- case 50:
- reg = CB_SC_VCC_5V;
- break;
- default:
- return -1;
- }
- switch (state->Vpp) {
- case 0:
- break;
- case 33:
- reg |= CB_SC_VPP_3V;
- break;
- case 50:
- reg |= CB_SC_VPP_5V;
- break;
- case 120:
- reg |= CB_SC_VPP_12V;
- break;
- default:
- return -1;
- }
- if (reg != cb_readl (s, CB_SOCKET_CONTROL))
- cb_writel (s, CB_SOCKET_CONTROL, reg);
-#endif /* CONFIG_CPC45 */
- return 0;
-}
-
-/*======================================================================
-
- Generic routines to get and set controller options
-
-======================================================================*/
-
-static void get_bridge_state (socket_info_t * s)
-{
-#ifdef CONFIG_CPC45
- cirrus_get_state (s);
-#else
- ti113x_get_state (s);
-#endif
- cb_get_state (s);
-}
-
-static void set_bridge_state (socket_info_t * s)
-{
- cb_set_state (s);
- i365_set (s, I365_GBLCTL, 0x00);
- i365_set (s, I365_GENCTL, 0x00);
-#ifdef CONFIG_CPC45
- cirrus_set_state (s);
-#else
- ti113x_set_state (s);
-#endif
-}
-
-static void set_bridge_opts (socket_info_t * s)
-{
-#ifdef CONFIG_CPC45
- cirrus_set_opts (s);
-#else
- ti113x_set_opts (s);
-#endif
- cb_set_opts (s);
-}
-
-/*====================================================================*/
-#define PD67_EXT_INDEX 0x2e /* Extension index */
-#define PD67_EXT_DATA 0x2f /* Extension data */
-#define PD67_EXD_VS1(s) (0x01 << ((s)<<1))
-
-#define pd67_ext_get(s, r) \
- (i365_set(s, PD67_EXT_INDEX, r), i365_get(s, PD67_EXT_DATA))
-
-static int i365_get_status (socket_info_t * s, u_int * value)
-{
- u_int status;
-#ifdef CONFIG_CPC45
- u_char val;
- u_char power, vcc, vpp;
- u_int powerstate;
-#endif
-
- status = i365_get (s, I365_IDENT);
- status = i365_get (s, I365_STATUS);
- *value = ((status & I365_CS_DETECT) == I365_CS_DETECT) ? SS_DETECT : 0;
- if (i365_get (s, I365_INTCTL) & I365_PC_IOCARD) {
- *value |= (status & I365_CS_STSCHG) ? 0 : SS_STSCHG;
- } else {
- *value |= (status & I365_CS_BVD1) ? 0 : SS_BATDEAD;
- *value |= (status & I365_CS_BVD2) ? 0 : SS_BATWARN;
- }
- *value |= (status & I365_CS_WRPROT) ? SS_WRPROT : 0;
- *value |= (status & I365_CS_READY) ? SS_READY : 0;
- *value |= (status & I365_CS_POWERON) ? SS_POWERON : 0;
-
-#ifdef CONFIG_CPC45
- /* Check for Cirrus CL-PD67xx chips */
- i365_set (s, PD67_CHIP_INFO, 0);
- val = i365_get (s, PD67_CHIP_INFO);
- s->type = -1;
- if ((val & PD67_INFO_CHIP_ID) == PD67_INFO_CHIP_ID) {
- val = i365_get (s, PD67_CHIP_INFO);
- if ((val & PD67_INFO_CHIP_ID) == 0) {
- s->type = (val & PD67_INFO_SLOTS) ? IS_PD672X : IS_PD6710;
- i365_set (s, PD67_EXT_INDEX, 0xe5);
- if (i365_get (s, PD67_EXT_INDEX) != 0xe5)
- s->type = IS_VT83C469;
- }
- } else {
- printf ("no Cirrus Chip found\n");
- *value = 0;
- return -1;
- }
-
- power = i365_get (s, I365_POWER);
- state.flags |= (power & I365_PWR_AUTO) ? SS_PWR_AUTO : 0;
- state.flags |= (power & I365_PWR_OUT) ? SS_OUTPUT_ENA : 0;
- vcc = power & I365_VCC_MASK;
- vpp = power & I365_VPP1_MASK;
- state.Vcc = state.Vpp = 0;
- if((vcc== 0) || (vpp == 0)) {
- /*
- * On the Cirrus we get the info which card voltage
- * we have in EXTERN DATA and write it to MISC_CTL1
- */
- powerstate = pd67_ext_get(s, PD67_EXTERN_DATA);
- if (powerstate & PD67_EXD_VS1(0)) {
- /* 5V Card */
- i365_bclr (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
- } else {
- /* 3.3V Card */
- i365_bset (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
- }
- i365_set (s, I365_POWER, (I365_PWR_OUT | I365_PWR_NORESET | I365_VCC_5V | I365_VPP1_5V));
- power = i365_get (s, I365_POWER);
- }
- if (power & I365_VCC_5V) {
- state.Vcc = (i365_get(s, PD67_MISC_CTL_1) & PD67_MC1_VCC_3V) ? 33 : 50;
- }
-
- if (power == I365_VPP1_12V)
- state.Vpp = 120;
-
- /* IO card, RESET flags, IO interrupt */
- power = i365_get (s, I365_INTCTL);
- state.flags |= (power & I365_PC_RESET) ? 0 : SS_RESET;
- if (power & I365_PC_IOCARD)
- state.flags |= SS_IOCARD;
- state.io_irq = power & I365_IRQ_MASK;
-
- /* Card status change mask */
- power = i365_get (s, I365_CSCINT);
- state.csc_mask = (power & I365_CSC_DETECT) ? SS_DETECT : 0;
- if (state.flags & SS_IOCARD)
- state.csc_mask |= (power & I365_CSC_STSCHG) ? SS_STSCHG : 0;
- else {
- state.csc_mask |= (power & I365_CSC_BVD1) ? SS_BATDEAD : 0;
- state.csc_mask |= (power & I365_CSC_BVD2) ? SS_BATWARN : 0;
- state.csc_mask |= (power & I365_CSC_READY) ? SS_READY : 0;
- }
- debug ("i82365: GetStatus(0) = flags %#3.3x, Vcc %d, Vpp %d, "
- "io_irq %d, csc_mask %#2.2x\n", state.flags,
- state.Vcc, state.Vpp, state.io_irq, state.csc_mask);
-
-#else /* !CONFIG_CPC45 */
-
- status = cb_readl (s, CB_SOCKET_STATE);
- *value |= (status & CB_SS_32BIT) ? SS_CARDBUS : 0;
- *value |= (status & CB_SS_3VCARD) ? SS_3VCARD : 0;
- *value |= (status & CB_SS_XVCARD) ? SS_XVCARD : 0;
- *value |= (status & CB_SS_VSENSE) ? 0 : SS_PENDING;
- /* For now, ignore cards with unsupported voltage keys */
- if (*value & SS_XVCARD)
- *value &= ~(SS_DETECT | SS_3VCARD | SS_XVCARD);
-#endif /* CONFIG_CPC45 */
- return 0;
-} /* i365_get_status */
-
-static int i365_set_socket (socket_info_t * s, socket_state_t * state)
-{
- u_char reg;
-
- set_bridge_state (s);
-
- /* IO card, RESET flag */
- reg = 0;
- reg |= (state->flags & SS_RESET) ? 0 : I365_PC_RESET;
- reg |= (state->flags & SS_IOCARD) ? I365_PC_IOCARD : 0;
- i365_set (s, I365_INTCTL, reg);
-
-#ifdef CONFIG_CPC45
- cb_set_power (s, state);
-
-#if 0
- /* Card status change interrupt mask */
- reg = s->cs_irq << 4;
- if (state->csc_mask & SS_DETECT)
- reg |= I365_CSC_DETECT;
- if (state->flags & SS_IOCARD) {
- if (state->csc_mask & SS_STSCHG)
- reg |= I365_CSC_STSCHG;
- } else {
- if (state->csc_mask & SS_BATDEAD)
- reg |= I365_CSC_BVD1;
- if (state->csc_mask & SS_BATWARN)
- reg |= I365_CSC_BVD2;
- if (state->csc_mask & SS_READY)
- reg |= I365_CSC_READY;
- }
- i365_set (s, I365_CSCINT, reg);
- i365_get (s, I365_CSC);
-#endif /* 0 */
-
-#else /* !CONFIG_CPC45 */
-
- reg = I365_PWR_NORESET;
- if (state->flags & SS_PWR_AUTO)
- reg |= I365_PWR_AUTO;
- if (state->flags & SS_OUTPUT_ENA)
- reg |= I365_PWR_OUT;
-
- cb_set_power (s, state);
- reg |= i365_get (s, I365_POWER) & (I365_VCC_MASK | I365_VPP1_MASK);
-
- if (reg != i365_get (s, I365_POWER))
- i365_set (s, I365_POWER, reg);
-#endif /* CONFIG_CPC45 */
-
- return 0;
-} /* i365_set_socket */
-
-/*====================================================================*/
-
-static int i365_set_mem_map (socket_info_t * s, struct pccard_mem_map *mem)
-{
- u_short base, i;
- u_char map;
-
- debug ("i82365: SetMemMap(%d, %#2.2x, %d ns, %#5.5lx-%#5.5lx, %#5.5x)\n",
- mem->map, mem->flags, mem->speed,
- mem->sys_start, mem->sys_stop, mem->card_start);
-
- map = mem->map;
- if ((map > 4) ||
- (mem->card_start > 0x3ffffff) ||
- (mem->sys_start > mem->sys_stop) ||
- (mem->speed > 1000)) {
- return -1;
- }
-
- /* Turn off the window before changing anything */
- if (i365_get (s, I365_ADDRWIN) & I365_ENA_MEM (map))
- i365_bclr (s, I365_ADDRWIN, I365_ENA_MEM (map));
-
- /* Take care of high byte, for PCI controllers */
- i365_set (s, CB_MEM_PAGE (map), mem->sys_start >> 24);
-
- base = I365_MEM (map);
- i = (mem->sys_start >> 12) & 0x0fff;
- if (mem->flags & MAP_16BIT)
- i |= I365_MEM_16BIT;
- if (mem->flags & MAP_0WS)
- i |= I365_MEM_0WS;
- i365_set_pair (s, base + I365_W_START, i);
-
- i = (mem->sys_stop >> 12) & 0x0fff;
- switch (mem->speed / CYCLE_TIME) {
- case 0:
- break;
- case 1:
- i |= I365_MEM_WS0;
- break;
- case 2:
- i |= I365_MEM_WS1;
- break;
- default:
- i |= I365_MEM_WS1 | I365_MEM_WS0;
- break;
- }
- i365_set_pair (s, base + I365_W_STOP, i);
-
-#ifdef CONFIG_CPC45
- i = 0;
-#else
- i = ((mem->card_start - mem->sys_start) >> 12) & 0x3fff;
-#endif
- if (mem->flags & MAP_WRPROT)
- i |= I365_MEM_WRPROT;
- if (mem->flags & MAP_ATTRIB)
- i |= I365_MEM_REG;
- i365_set_pair (s, base + I365_W_OFF, i);
-
-#ifdef CONFIG_CPC45
- /* set System Memory map Upper Adress */
- i365_set(s, PD67_EXT_INDEX, PD67_MEM_PAGE(map));
- i365_set(s, PD67_EXT_DATA, ((mem->sys_start >> 24) & 0xff));
-#endif
-
- /* Turn on the window if necessary */
- if (mem->flags & MAP_ACTIVE)
- i365_bset (s, I365_ADDRWIN, I365_ENA_MEM (map));
- return 0;
-} /* i365_set_mem_map */
-
-static int i365_set_io_map (socket_info_t * s, struct pccard_io_map *io)
-{
- u_char map, ioctl;
-
- map = io->map;
- /* comment out: comparison is always false due to limited range of data type */
- if ((map > 1) || /* (io->start > 0xffff) || (io->stop > 0xffff) || */
- (io->stop < io->start))
- return -1;
- /* Turn off the window before changing anything */
- if (i365_get (s, I365_ADDRWIN) & I365_ENA_IO (map))
- i365_bclr (s, I365_ADDRWIN, I365_ENA_IO (map));
- i365_set_pair (s, I365_IO (map) + I365_W_START, io->start);
- i365_set_pair (s, I365_IO (map) + I365_W_STOP, io->stop);
- ioctl = i365_get (s, I365_IOCTL) & ~I365_IOCTL_MASK (map);
- if (io->speed)
- ioctl |= I365_IOCTL_WAIT (map);
- if (io->flags & MAP_0WS)
- ioctl |= I365_IOCTL_0WS (map);
- if (io->flags & MAP_16BIT)
- ioctl |= I365_IOCTL_16BIT (map);
- if (io->flags & MAP_AUTOSZ)
- ioctl |= I365_IOCTL_IOCS16 (map);
- i365_set (s, I365_IOCTL, ioctl);
- /* Turn on the window if necessary */
- if (io->flags & MAP_ACTIVE)
- i365_bset (s, I365_ADDRWIN, I365_ENA_IO (map));
- return 0;
-} /* i365_set_io_map */
-
-/*====================================================================*/
-
-int i82365_init (void)
-{
- u_int val;
- int i;
-
-#ifdef CONFIG_CPC45
- if (SPD67290Init () != 0)
- return 1;
-#endif
- if ((socket.dev = pci_find_devices (supported, 0)) < 0) {
- /* Controller not found */
- return 1;
- }
- debug ("i82365 Device Found!\n");
-
- pci_read_config_dword (socket.dev, PCI_BASE_ADDRESS_0, &socket.cb_phys);
- socket.cb_phys &= ~0xf;
-
-#ifdef CONFIG_CPC45
- /* + 0xfe000000 see MPC 8245 Users Manual Adress Map B */
- socket.cb_phys += 0xfe000000;
-#endif
-
- get_bridge_state (&socket);
- set_bridge_opts (&socket);
-
- i = i365_get_status (&socket, &val);
-
-#ifdef CONFIG_CPC45
- if (i > -1) {
- puts (pcic[socket.type].name);
- } else {
- printf ("i82365: Controller not found.\n");
- return 1;
- }
- if((val & SS_DETECT) != SS_DETECT){
- puts ("No card\n");
- return 1;
- }
-#else /* !CONFIG_CPC45 */
- if (val & SS_DETECT) {
- if (val & SS_3VCARD) {
- state.Vcc = state.Vpp = 33;
- puts (" 3.3V card found: ");
- } else if (!(val & SS_XVCARD)) {
- state.Vcc = state.Vpp = 50;
- puts (" 5.0V card found: ");
- } else {
- puts ("i82365: unsupported voltage key\n");
- state.Vcc = state.Vpp = 0;
- }
- } else {
- /* No card inserted */
- puts ("No card\n");
- return 1;
- }
-#endif /* CONFIG_CPC45 */
-
-#ifdef CONFIG_CPC45
- state.flags |= SS_OUTPUT_ENA;
-#else
- state.flags = SS_IOCARD | SS_OUTPUT_ENA;
- state.csc_mask = 0;
- state.io_irq = 0;
-#endif
-
- i365_set_socket (&socket, &state);
-
- for (i = 500; i; i--) {
- if ((i365_get (&socket, I365_STATUS) & I365_CS_READY))
- break;
- udelay (1000);
- }
-
- if (i == 0) {
- /* PC Card not ready for data transfer */
- puts ("i82365 PC Card not ready for data transfer\n");
- return 1;
- }
- debug (" PC Card ready for data transfer: ");
-
- mem.map = 0;
- mem.flags = MAP_ATTRIB | MAP_ACTIVE;
- mem.speed = 300;
- mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR;
- mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE - 1;
- mem.card_start = 0;
- i365_set_mem_map (&socket, &mem);
-
-#ifdef CONFIG_CPC45
- mem.map = 1;
- mem.flags = MAP_ACTIVE;
- mem.speed = 300;
- mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE;
- mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + (2 * CONFIG_SYS_PCMCIA_MEM_SIZE) - 1;
- mem.card_start = 0;
- i365_set_mem_map (&socket, &mem);
-
-#else /* !CONFIG_CPC45 */
-
- io.map = 0;
- io.flags = MAP_AUTOSZ | MAP_ACTIVE;
- io.speed = 0;
- io.start = 0x0100;
- io.stop = 0x010F;
- i365_set_io_map (&socket, &io);
-
-#endif /* CONFIG_CPC45 */
-
-#ifdef DEBUG
- i82365_dump_regions (socket.dev);
-#endif
-
- return 0;
-}
-
-void i82365_exit (void)
-{
- io.map = 0;
- io.flags = 0;
- io.speed = 0;
- io.start = 0;
- io.stop = 0x1;
-
- i365_set_io_map (&socket, &io);
-
- mem.map = 0;
- mem.flags = 0;
- mem.speed = 0;
- mem.sys_start = 0;
- mem.sys_stop = 0x1000;
- mem.card_start = 0;
-
- i365_set_mem_map (&socket, &mem);
-
-#ifdef CONFIG_CPC45
- mem.map = 1;
- mem.flags = 0;
- mem.speed = 0;
- mem.sys_start = 0;
- mem.sys_stop = 0x1000;
- mem.card_start = 0;
-
- i365_set_mem_map (&socket, &mem);
-#else /* !CONFIG_CPC45 */
- socket.state.sysctl &= 0xFFFF00FF;
-#endif
- state.Vcc = state.Vpp = 0;
-
- i365_set_socket (&socket, &state);
-}
-
-/*======================================================================
-
- Debug stuff
-
-======================================================================*/
-
-#ifdef DEBUG
-static void i82365_dump_regions (pci_dev_t dev)
-{
- u_int tmp[2];
- u_int *mem = (void *) socket.cb_phys;
- u_char *cis = (void *) CONFIG_SYS_PCMCIA_MEM_ADDR;
- u_char *ide = (void *) (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_REG_OFFSET);
-
- pci_read_config_dword (dev, 0x00, tmp + 0);
- pci_read_config_dword (dev, 0x80, tmp + 1);
-
- printf ("PCI CONF: %08X ... %08X\n",
- tmp[0], tmp[1]);
- printf ("PCI MEM: ... %08X ... %08X\n",
- mem[0x8 / 4], mem[0x800 / 4]);
- printf ("CIS: ...%c%c%c%c%c%c%c%c...\n",
- cis[0x38], cis[0x3a], cis[0x3c], cis[0x3e],
- cis[0x40], cis[0x42], cis[0x44], cis[0x48]);
- printf ("CIS CONF: %02X %02X %02X ...\n",
- cis[0x200], cis[0x202], cis[0x204]);
- printf ("IDE: %02X %02X %02X %02X %02X %02X %02X %02X\n",
- ide[0], ide[1], ide[2], ide[3],
- ide[4], ide[5], ide[6], ide[7]);
-}
-#endif /* DEBUG */
diff --git a/include/configs/A3000.h b/include/configs/A3000.h
deleted file mode 100644
index 35e3e6f..0000000
--- a/include/configs/A3000.h
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * (C) Copyright 2001, 2002, 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* ------------------------------------------------------------------------- */
-/*
- * Configuration settings for the A-3000 board (Artis Microsystems Inc.).
- * http://artismicro.com
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8245 1
-#define CONFIG_A3000 1
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 9600
-
-#define CONFIG_BOOTDELAY 5
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-/*
- * Miscellaneous configurable options
- */
-#undef CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "A3000> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-
-/* Print Buffer Size
- */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 8 /* Max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x00400000 /* Default load address */
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
-#undef CONFIG_PCI_PNP
-#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
-
-
-/* #define CONFIG_TULIP */
-/* #define CONFIG_EEPRO100 */
-#define CONFIG_NATSEMI
-
-#define PCI_ENET0_IOADDR 0x80000000
-#define PCI_ENET0_MEMADDR 0x80000000
-#define PCI_ENET1_IOADDR 0x81000000
-#define PCI_ENET1_MEMADDR 0x81000000
-#define PCI_ENET2_IOADDR 0x82000000
-#define PCI_ENET2_MEMADDR 0x82000000
-#define PCI_ENET3_IOADDR 0x83000000
-#define PCI_ENET3_MEMADDR 0x83000000
-
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-#define CONFIG_SYS_FLASH_BASE0_PRELIM 0xFF000000 /* FLASH bank on RCS#0 */
-#define CONFIG_SYS_FLASH_BASE1_PRELIM 0xFF000000 /* FLASH bank on RCS#1 */
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH_BASE0_PRELIM
-#define CONFIG_SYS_FLASH_BANKS { CONFIG_SYS_FLASH_BASE0_PRELIM }
-
-/* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the
- * reset vector is actually located at FFB00100, but the 8245
- * takes care of us.
- */
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-
-#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
-
- /* Maximum amount of RAM.
- */
-#define CONFIG_SYS_MAX_RAM_SIZE 0x04000000 /* 0 .. 128 MB of (S)DRAM */
-
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-#undef CONFIG_SYS_RAMBOOT
-#else
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4600)
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-
-/* #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- * For the detail description refer to the MPC8240 user's manual.
- */
-
-#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
-
- /* Bit-field values for MCCR1.
- */
-#define CONFIG_SYS_ROMNAL 7
-#define CONFIG_SYS_ROMFAL 11
-#define CONFIG_SYS_DBUS_SIZE 0x3
-
- /* Bit-field values for MCCR2.
- */
-#define CONFIG_SYS_TSWAIT 0x5 /* Transaction Start Wait States timer */
-#define CONFIG_SYS_REFINT 0x400 /* Refresh interval FIXME: was 0t430 */
-
- /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
- */
-#define CONFIG_SYS_BSTOPRE 121
-
- /* Bit-field values for MCCR3.
- */
-#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */
-
- /* Bit-field values for MCCR4.
- */
-#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval FIXME: was 2 */
-#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval FIXME: was 5 */
-#define CONFIG_SYS_ACTORW 3 /* FIXME was 2 */
-#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */
-#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-#define CONFIG_SYS_EXTROM 1
-#define CONFIG_SYS_REGDIMM 0
-
-#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
-
-#define CONFIG_SYS_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
-
-/* Memory bank settings.
- * Only bits 20-29 are actually used from these vales to set the
- * start/end addresses. The upper two bits will always be 0, and the lower
- * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
- * address. Refer to the MPC8240 book.
- */
-
-#define CONFIG_SYS_BANK0_START 0x00000000
-#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE 1
-#define CONFIG_SYS_BANK1_START 0x3ff00000
-#define CONFIG_SYS_BANK1_END 0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE 0
-#define CONFIG_SYS_BANK2_START 0x3ff00000
-#define CONFIG_SYS_BANK2_END 0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE 0
-#define CONFIG_SYS_BANK3_START 0x3ff00000
-#define CONFIG_SYS_BANK3_END 0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE 0
-#define CONFIG_SYS_BANK4_START 0x3ff00000
-#define CONFIG_SYS_BANK4_END 0x3fffffff
-#define CONFIG_SYS_BANK4_ENABLE 0
-#define CONFIG_SYS_BANK5_START 0x3ff00000
-#define CONFIG_SYS_BANK5_END 0x3fffffff
-#define CONFIG_SYS_BANK5_ENABLE 0
-#define CONFIG_SYS_BANK6_START 0x3ff00000
-#define CONFIG_SYS_BANK6_END 0x3fffffff
-#define CONFIG_SYS_BANK6_ENABLE 0
-#define CONFIG_SYS_BANK7_START 0x3ff00000
-#define CONFIG_SYS_BANK7_END 0x3fffffff
-#define CONFIG_SYS_BANK7_ENABLE 0
-
-#define CONFIG_SYS_ODCR 0xff
-
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max number of sectors per flash */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-
- /* Warining: environment is not EMBEDDED in the U-Boot code.
- * It's stored in flash separately.
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR 0xFFFE0000
-#define CONFIG_ENV_SIZE 0x00020000 /* Size of the Environment */
-#define CONFIG_ENV_SECT_SIZE 0x00020000 /* Size of the Environment Sector */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
deleted file mode 100644
index a75c52f..0000000
--- a/include/configs/CPC45.h
+++ /dev/null
@@ -1,489 +0,0 @@
-/*
- * (C) Copyright 2001-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- *
- * Configuration settings for the CPC45 board.
- *
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8245 1
-#define CONFIG_CPC45 1
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 9600
-
-#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#define CONFIG_BOOTDELAY 5
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BEDBUG
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-
-#if 1
-#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */
-#endif
-
-/* Print Buffer Size
- */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-#if defined(CONFIG_BOOT_ROM)
-#define CONFIG_SYS_FLASH_BASE 0xFF000000
-#else
-#define CONFIG_SYS_FLASH_BASE 0xFF800000
-#endif
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-
-#define CONFIG_SYS_EUMB_ADDR 0xFCE00000
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
-
-/* Maximum amount of RAM.
- */
-#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000
-
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-#undef CONFIG_SYS_RAMBOOT
-#else
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4600)
-#define DUART_DCR (CONFIG_SYS_EUMB_ADDR + 0x4511)
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-
-#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-/*
- * RTC configuration
- */
-#define CONFIG_RTC_PCF8563
-#define CONFIG_SYS_I2C_RTC_ADDR 0x51
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x58
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- * For the detail description refer to the MPC8240 user's manual.
- */
-
-#define CONFIG_SYS_CLK_FREQ 33000000
-
-
-/* Bit-field values for MCCR1.
- */
-#define CONFIG_SYS_ROMNAL 0
-#define CONFIG_SYS_ROMFAL 8
-
-#define CONFIG_SYS_BANK0_ROW 0 /* SDRAM bank 7-0 row address */
-#define CONFIG_SYS_BANK1_ROW 0
-#define CONFIG_SYS_BANK2_ROW 0
-#define CONFIG_SYS_BANK3_ROW 0
-#define CONFIG_SYS_BANK4_ROW 0
-#define CONFIG_SYS_BANK5_ROW 0
-#define CONFIG_SYS_BANK6_ROW 0
-#define CONFIG_SYS_BANK7_ROW 0
-
-/* Bit-field values for MCCR2.
- */
-
-#define CONFIG_SYS_REFINT 0x2ec
-
-/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
- */
-#define CONFIG_SYS_BSTOPRE 160
-
-/* Bit-field values for MCCR3.
- */
-#define CONFIG_SYS_REFREC 2 /* Refresh to activate interval */
-#define CONFIG_SYS_RDLAT 0 /* Data latancy from read command */
-
-/* Bit-field values for MCCR4.
- */
-#define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval */
-#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */
-#define CONFIG_SYS_SDMODE_CAS_LAT 2 /* SDMODE CAS latancy */
-#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */
-#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* SDMODE Burst length */
-#define CONFIG_SYS_ACTORW 2
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-#define CONFIG_SYS_EXTROM 0
-#define CONFIG_SYS_REGDIMM 0
-
-/* Memory bank settings.
- * Only bits 20-29 are actually used from these vales to set the
- * start/end addresses. The upper two bits will always be 0, and the lower
- * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
- * address. Refer to the MPC8240 book.
- */
-
-#define CONFIG_SYS_BANK0_START 0x00000000
-#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE 1
-#define CONFIG_SYS_BANK1_START 0x3ff00000
-#define CONFIG_SYS_BANK1_END 0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE 0
-#define CONFIG_SYS_BANK2_START 0x3ff00000
-#define CONFIG_SYS_BANK2_END 0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE 0
-#define CONFIG_SYS_BANK3_START 0x3ff00000
-#define CONFIG_SYS_BANK3_END 0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE 0
-#define CONFIG_SYS_BANK4_START 0x3ff00000
-#define CONFIG_SYS_BANK4_END 0x3fffffff
-#define CONFIG_SYS_BANK4_ENABLE 0
-#define CONFIG_SYS_BANK5_START 0x3ff00000
-#define CONFIG_SYS_BANK5_END 0x3fffffff
-#define CONFIG_SYS_BANK5_ENABLE 0
-#define CONFIG_SYS_BANK6_START 0x3ff00000
-#define CONFIG_SYS_BANK6_END 0x3fffffff
-#define CONFIG_SYS_BANK6_ENABLE 0
-#define CONFIG_SYS_BANK7_START 0x3ff00000
-#define CONFIG_SYS_BANK7_END 0x3fffffff
-#define CONFIG_SYS_BANK7_ENABLE 0
-
-#define CONFIG_SYS_ODCR 0xff
-#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */
- /* currently accessed page in memory */
- /* see 8240 book for details */
-
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 39 /* Max number of sectors in one bank */
-#define INTEL_ID_28F160F3T 0x88F388F3 /* 16M = 1M x 16 top boot sector */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
- /* Warining: environment is not EMBEDDED in the ppcboot code.
- * It's stored in flash separately.
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x7F8000)
-#define CONFIG_ENV_SIZE 0x4000 /* Size of the Environment */
-#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */
-#define CONFIG_ENV_SECT_SIZE 0x8000 /* Size of the Environment Sector */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*----------------------------------------------------------------------*/
-/* CPC45 Memory Map */
-/*----------------------------------------------------------------------*/
-#define SRAM_BASE 0x80000000 /* SRAM base address */
-#define SRAM_END 0x801FFFFF
-#define ST16552_A_BASE 0x80200000 /* ST16552 channel A */
-#define ST16552_B_BASE 0x80400000 /* ST16552 channel A */
-#define BCSR_BASE 0x80600000 /* board control / status registers */
-#define DISPLAY_BASE 0x80600040 /* DISPLAY base */
-#define PCMCIA_MEM_BASE 0x83000000 /* PCMCIA memory window base */
-#define PCMCIA_IO_BASE 0xFE000000 /* PCMCIA IO window base */
-
-#define CONFIG_SYS_SRAM_BASE SRAM_BASE
-#define CONFIG_SYS_SRAM_SIZE (SRAM_END - SRAM_BASE + 1)
-
-/*---------------------------------------------------------------------*/
-/* CPC45 Control/Status Registers */
-/*---------------------------------------------------------------------*/
-#define IRQ_ENA_1 *((volatile uchar*)(BCSR_BASE + 0x00))
-#define IRQ_STAT_1 *((volatile uchar*)(BCSR_BASE + 0x01))
-#define IRQ_ENA_2 *((volatile uchar*)(BCSR_BASE + 0x02))
-#define IRQ_STAT_2 *((volatile uchar*)(BCSR_BASE + 0x03))
-#define BOARD_CTRL *((volatile uchar*)(BCSR_BASE + 0x04))
-#define BOARD_STAT *((volatile uchar*)(BCSR_BASE + 0x05))
-#define WDG_START *((volatile uchar*)(BCSR_BASE + 0x06))
-#define WDG_PRESTOP *((volatile uchar*)(BCSR_BASE + 0x06))
-#define WDG_STOP *((volatile uchar*)(BCSR_BASE + 0x06))
-#define BOARD_REV *((volatile uchar*)(BCSR_BASE + 0x07))
-
-/* IRQ_ENA_1 bit definitions */
-#define I_ENA_1_IERA 0x80 /* INTA enable */
-#define I_ENA_1_IERB 0x40 /* INTB enable */
-#define I_ENA_1_IERC 0x20 /* INTC enable */
-#define I_ENA_1_IERD 0x10 /* INTD enable */
-
-/* IRQ_STAT_1 bit definitions */
-#define I_STAT_1_INTA 0x80 /* INTA status */
-#define I_STAT_1_INTB 0x40 /* INTB status */
-#define I_STAT_1_INTC 0x20 /* INTC status */
-#define I_STAT_1_INTD 0x10 /* INTD status */
-
-/* IRQ_ENA_2 bit definitions */
-#define I_ENA_2_IEAB 0x80 /* ABORT IRQ enable */
-#define I_ENA_2_IEK1 0x40 /* KEY1 IRQ enable */
-#define I_ENA_2_IEK2 0x20 /* KEY2 IRQ enable */
-#define I_ENA_2_IERT 0x10 /* RTC IRQ enable */
-#define I_ENA_2_IESM 0x08 /* LM81 IRQ enable */
-#define I_ENA_2_IEDG 0x04 /* DEGENERATING IRQ enable */
-#define I_ENA_2_IES2 0x02 /* ST16552/B IRQ enable */
-#define I_ENA_2_IES1 0x01 /* ST16552/A IRQ enable */
-
-/* IRQ_STAT_2 bit definitions */
-#define I_STAT_2_ABO 0x80 /* ABORT IRQ status */
-#define I_STAT_2_KY1 0x40 /* KEY1 IRQ status */
-#define I_STAT_2_KY2 0x20 /* KEY2 IRQ status */
-#define I_STAT_2_RTC 0x10 /* RTC IRQ status */
-#define I_STAT_2_SMN 0x08 /* LM81 IRQ status */
-#define I_STAT_2_DEG 0x04 /* DEGENERATING IRQ status */
-#define I_STAT_2_SIO2 0x02 /* ST16552/B IRQ status */
-#define I_STAT_2_SIO1 0x01 /* ST16552/A IRQ status */
-
-/* BOARD_CTRL bit definitions */
-#define USER_LEDS 2 /* 2 user LEDs */
-
-#if (USER_LEDS == 4)
-#define B_CTRL_WRSE 0x80
-#define B_CTRL_KRSE 0x40
-#define B_CTRL_FWRE 0x20 /* Flash write enable */
-#define B_CTRL_FWPT 0x10 /* Flash write protect */
-#define B_CTRL_LED3 0x08 /* LED 3 control */
-#define B_CTRL_LED2 0x04 /* LED 2 control */
-#define B_CTRL_LED1 0x02 /* LED 1 control */
-#define B_CTRL_LED0 0x01 /* LED 0 control */
-#else
-#define B_CTRL_WRSE 0x80
-#define B_CTRL_KRSE 0x40
-#define B_CTRL_FWRE_1 0x20 /* Flash write enable */
-#define B_CTRL_FWPT_1 0x10 /* Flash write protect */
-#define B_CTRL_LED1 0x08 /* LED 1 control */
-#define B_CTRL_LED0 0x04 /* LED 0 control */
-#define B_CTRL_FWRE_0 0x02 /* Flash write enable */
-#define B_CTRL_FWPT_0 0x01 /* Flash write protect */
-#endif
-
-/* BOARD_STAT bit definitions */
-#define B_STAT_WDGE 0x80
-#define B_STAT_WDGS 0x40
-#define B_STAT_WRST 0x20
-#define B_STAT_KRST 0x10
-#define B_STAT_CSW3 0x08 /* sitch bit 3 status */
-#define B_STAT_CSW2 0x04 /* sitch bit 2 status */
-#define B_STAT_CSW1 0x02 /* sitch bit 1 status */
-#define B_STAT_CSW0 0x01 /* sitch bit 0 status */
-
-/*---------------------------------------------------------------------*/
-/* Display addresses */
-/*---------------------------------------------------------------------*/
-#define DISP_UDC_RAM (DISPLAY_BASE + 0x08) /* UDC RAM */
-#define DISP_CHR_RAM (DISPLAY_BASE + 0x18) /* character Ram */
-#define DISP_FLASH (DISPLAY_BASE + 0x20) /* Flash Ram */
-
-#define DISP_UDC_ADR *((volatile uchar*)(DISPLAY_BASE + 0x00)) /* UDC Address Reg. */
-#define DISP_CWORD *((volatile uchar*)(DISPLAY_BASE + 0x10)) /* Control Word Reg. */
-
-#define DISP_DIG0 *((volatile uchar*)(DISP_CHR_RAM + 0x00)) /* Digit 0 address */
-#define DISP_DIG1 *((volatile uchar*)(DISP_CHR_RAM + 0x01)) /* Digit 0 address */
-#define DISP_DIG2 *((volatile uchar*)(DISP_CHR_RAM + 0x02)) /* Digit 0 address */
-#define DISP_DIG3 *((volatile uchar*)(DISP_CHR_RAM + 0x03)) /* Digit 0 address */
-#define DISP_DIG4 *((volatile uchar*)(DISP_CHR_RAM + 0x04)) /* Digit 0 address */
-#define DISP_DIG5 *((volatile uchar*)(DISP_CHR_RAM + 0x05)) /* Digit 0 address */
-#define DISP_DIG6 *((volatile uchar*)(DISP_CHR_RAM + 0x06)) /* Digit 0 address */
-#define DISP_DIG7 *((volatile uchar*)(DISP_CHR_RAM + 0x07)) /* Digit 0 address */
-
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
-#define CONFIG_SYS_EARLY_PCI_INIT
-#undef CONFIG_PCI_PNP
-#undef CONFIG_PCI_SCAN_SHOW
-
-
-#define CONFIG_EEPRO100
-#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-
-#define PCI_ENET0_IOADDR 0x82000000
-#define PCI_ENET0_MEMADDR 0x82000000
-#define PCI_PLX9030_IOADDR 0x82100000
-#define PCI_PLX9030_MEMADDR 0x82100000
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_I82365
-
-#define CONFIG_SYS_PCMCIA_MEM_ADDR PCMCIA_MEM_BASE
-#define CONFIG_SYS_PCMCIA_MEM_SIZE 0x1000
-
-#define CONFIG_PCMCIA_SLOT_A
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
-#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
-#undef CONFIG_IDE_RESET /* reset for IDE not supported */
-#define CONFIG_IDE_LED /* LED for IDE is supported */
-
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
-
-#define CONFIG_SYS_ATA_DATA_OFFSET CONFIG_SYS_PCMCIA_MEM_SIZE
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x400)
-
-#define CONFIG_DOS_PARTITION
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/CU824.h b/include/configs/CU824.h
deleted file mode 100644
index dc98a56..0000000
--- a/include/configs/CU824.h
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- * (C) Copyright 2001-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- *
- * Configuration settings for the CU824 board.
- *
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8240 1
-#define CONFIG_CU824 1
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 9600
-
-#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#define CONFIG_BOOTCOMMAND "bootm FE020000" /* autoboot command */
-#define CONFIG_BOOTDELAY 5
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BEDBUG
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-
-#if 1
-#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */
-#endif
-
-/* Print Buffer Size
- */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xFF000000
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-
-#define CONFIG_SYS_EUMB_ADDR 0xFCE00000
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
-
- /* Maximum amount of RAM.
- */
-#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000
-
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-#undef CONFIG_SYS_RAMBOOT
-#else
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE 4
-
-#define CONFIG_SYS_NS16550_CLK (14745600 / 2)
-
-#define CONFIG_SYS_NS16550_COM1 0xFE800080
-#define CONFIG_SYS_NS16550_COM2 0xFE8000C0
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- * For the detail description refer to the MPC8240 user's manual.
- */
-
-#define CONFIG_SYS_CLK_FREQ 33000000
-
- /* Bit-field values for MCCR1.
- */
-#define CONFIG_SYS_ROMNAL 0
-#define CONFIG_SYS_ROMFAL 7
-
- /* Bit-field values for MCCR2.
- */
-#define CONFIG_SYS_REFINT 430 /* Refresh interval */
-
- /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
- */
-#define CONFIG_SYS_BSTOPRE 192
-
- /* Bit-field values for MCCR3.
- */
-#define CONFIG_SYS_REFREC 2 /* Refresh to activate interval */
-#define CONFIG_SYS_RDLAT 3 /* Data latancy from read command */
-
- /* Bit-field values for MCCR4.
- */
-#define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval */
-#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */
-#define CONFIG_SYS_SDMODE_CAS_LAT 2 /* SDMODE CAS latancy */
-#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */
-#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* SDMODE Burst length */
-#define CONFIG_SYS_ACTORW 2
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-
-/* Memory bank settings.
- * Only bits 20-29 are actually used from these vales to set the
- * start/end addresses. The upper two bits will always be 0, and the lower
- * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
- * address. Refer to the MPC8240 book.
- */
-
-#define CONFIG_SYS_BANK0_START 0x00000000
-#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE 1
-#define CONFIG_SYS_BANK1_START 0x3ff00000
-#define CONFIG_SYS_BANK1_END 0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE 0
-#define CONFIG_SYS_BANK2_START 0x3ff00000
-#define CONFIG_SYS_BANK2_END 0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE 0
-#define CONFIG_SYS_BANK3_START 0x3ff00000
-#define CONFIG_SYS_BANK3_END 0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE 0
-#define CONFIG_SYS_BANK4_START 0x3ff00000
-#define CONFIG_SYS_BANK4_END 0x3fffffff
-#define CONFIG_SYS_BANK4_ENABLE 0
-#define CONFIG_SYS_BANK5_START 0x3ff00000
-#define CONFIG_SYS_BANK5_END 0x3fffffff
-#define CONFIG_SYS_BANK5_ENABLE 0
-#define CONFIG_SYS_BANK6_START 0x3ff00000
-#define CONFIG_SYS_BANK6_END 0x3fffffff
-#define CONFIG_SYS_BANK6_ENABLE 0
-#define CONFIG_SYS_BANK7_START 0x3ff00000
-#define CONFIG_SYS_BANK7_END 0x3fffffff
-#define CONFIG_SYS_BANK7_ENABLE 0
-
-#define CONFIG_SYS_ODCR 0xff
-
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* Max number of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 39 /* Max number of sectors in one bank */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
- /* Warining: environment is not EMBEDDED in the U-Boot code.
- * It's stored in flash separately.
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#if 0
-#define CONFIG_ENV_ADDR 0xFF008000
-#define CONFIG_ENV_SIZE 0x8000 /* Size of the Environment Sector */
-#else
-#define CONFIG_ENV_ADDR 0xFFFC0000
-#define CONFIG_ENV_SIZE 0x4000 /* Size of the Environment */
-#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */
-#define CONFIG_ENV_SECT_SIZE 0x40000 /* Size of the Environment Sector */
-#endif
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
-#undef CONFIG_PCI_PNP
-
-
-#define CONFIG_TULIP
-#define CONFIG_TULIP_USE_IO
-
-#define CONFIG_SYS_ETH_DEV_FN 0x7800
-#define CONFIG_SYS_ETH_IOBASE 0x00104000
-
-#define CONFIG_EEPRO100
-#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-#define PCI_ENET0_IOADDR 0x00104000
-#define PCI_ENET0_MEMADDR 0x80000000
-#endif /* __CONFIG_H */
diff --git a/include/configs/MUSENKI.h b/include/configs/MUSENKI.h
deleted file mode 100644
index c5c9290..0000000
--- a/include/configs/MUSENKI.h
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- *
- * Configuration settings for the MUSENKI board.
- *
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8245 1
-#define CONFIG_MUSENKI 1
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 9600
-
-#define CONFIG_BOOTDELAY 5
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-/*
- * Miscellaneous configurable options
- */
-#undef CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-
-/* Print Buffer Size
- */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 8 /* Max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
-#undef CONFIG_PCI_PNP
-
-
-#define CONFIG_TULIP
-
-#define PCI_ENET0_IOADDR 0x80000000
-#define PCI_ENET0_MEMADDR 0x80000000
-#define PCI_ENET1_IOADDR 0x81000000
-#define PCI_ENET1_MEMADDR 0x81000000
-
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-#define CONFIG_SYS_FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank on RCS#0 */
-#define CONFIG_SYS_FLASH_BASE1_PRELIM 0xFF000000 /* FLASH bank on RCS#1 */
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH_BASE0_PRELIM
-
-/* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the
- * reset vector is actually located at FFB00100, but the 8245
- * takes care of us.
- */
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-
-#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
-
- /* Maximum amount of RAM.
- */
-#define CONFIG_SYS_MAX_RAM_SIZE 0x08000000 /* 0 .. 128 MB of (S)DRAM */
-
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-#undef CONFIG_SYS_RAMBOOT
-#else
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4600)
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-
-/* #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- * For the detail description refer to the MPC8240 user's manual.
- */
-
-#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
-
- /* Bit-field values for MCCR1.
- */
-#define CONFIG_SYS_ROMNAL 7
-#define CONFIG_SYS_ROMFAL 11
-#define CONFIG_SYS_DBUS_SIZE 0x3
-
- /* Bit-field values for MCCR2.
- */
-#define CONFIG_SYS_TSWAIT 0x5 /* Transaction Start Wait States timer */
-#define CONFIG_SYS_REFINT 0x400 /* Refresh interval FIXME: was 0t430 */
-
- /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
- */
-#define CONFIG_SYS_BSTOPRE 121
-
- /* Bit-field values for MCCR3.
- */
-#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */
-
- /* Bit-field values for MCCR4.
- */
-#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval FIXME: was 2 */
-#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval FIXME: was 5 */
-#define CONFIG_SYS_ACTORW 3 /* FIXME was 2 */
-#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */
-#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-#define CONFIG_SYS_EXTROM 1
-#define CONFIG_SYS_REGDIMM 0
-
-#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
-
-#define CONFIG_SYS_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
-
-/* Memory bank settings.
- * Only bits 20-29 are actually used from these vales to set the
- * start/end addresses. The upper two bits will always be 0, and the lower
- * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
- * address. Refer to the MPC8240 book.
- */
-
-#define CONFIG_SYS_BANK0_START 0x00000000
-#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE 1
-#define CONFIG_SYS_BANK1_START 0x3ff00000
-#define CONFIG_SYS_BANK1_END 0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE 0
-#define CONFIG_SYS_BANK2_START 0x3ff00000
-#define CONFIG_SYS_BANK2_END 0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE 0
-#define CONFIG_SYS_BANK3_START 0x3ff00000
-#define CONFIG_SYS_BANK3_END 0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE 0
-#define CONFIG_SYS_BANK4_START 0x3ff00000
-#define CONFIG_SYS_BANK4_END 0x3fffffff
-#define CONFIG_SYS_BANK4_ENABLE 0
-#define CONFIG_SYS_BANK5_START 0x3ff00000
-#define CONFIG_SYS_BANK5_END 0x3fffffff
-#define CONFIG_SYS_BANK5_ENABLE 0
-#define CONFIG_SYS_BANK6_START 0x3ff00000
-#define CONFIG_SYS_BANK6_END 0x3fffffff
-#define CONFIG_SYS_BANK6_ENABLE 0
-#define CONFIG_SYS_BANK7_START 0x3ff00000
-#define CONFIG_SYS_BANK7_END 0x3fffffff
-#define CONFIG_SYS_BANK7_ENABLE 0
-
-#define CONFIG_SYS_ODCR 0xff
-
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* Max number of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* Max number of sectors per flash */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-
- /* Warining: environment is not EMBEDDED in the U-Boot code.
- * It's stored in flash separately.
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR 0xFFFF0000
-#define CONFIG_ENV_SIZE 0x00010000 /* Size of the Environment */
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* Size of the Environment Sector */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h
deleted file mode 100644
index aa2d9c0..0000000
--- a/include/configs/MVBLUE.h
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define MV_VERSION "v0.2.0"
-
-/* LED0 = Power , LED1 = Error , LED2-5 = error code, LED6-7=00 -->PPCBoot error */
-#define ERR_NONE 0
-#define ERR_ENV 1
-#define ERR_BOOTM_BADMAGIC 2
-#define ERR_BOOTM_BADCRC 3
-#define ERR_BOOTM_GUNZIP 4
-#define ERR_BOOTP_TIMEOUT 5
-#define ERR_DHCP 6
-#define ERR_TFTP 7
-#define ERR_NOLAN 8
-#define ERR_LANDRV 9
-
-#define CONFIG_BOARD_TYPES 1
-#define MVBLUE_BOARD_BOX 1
-#define MVBLUE_BOARD_LYNX 2
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-#define CONFIG_SYS_LDSCRIPT "board/mvblue/u-boot.lds"
-
-#if 0
-#define ERR_LED(code) do { if (code) \
- *(volatile char *)(0xff000003) = ( 3 | (code<<4) ) & 0xf3; \
- else \
- *(volatile char *)(0xff000003) = ( 1 ); \
-} while(0)
-#else
-#define ERR_LED(code)
-#endif
-
-#define CONFIG_MPC8245 1
-#define CONFIG_MVBLUE 1
-
-#define CONFIG_CLOCKS_IN_MHZ 1
-
-#define CONFIG_BOARD_TYPES 1
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOT_RETRY_TIME -1
-
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT \
- "autoboot in %d seconds (stop with 's')...\n", bootdelay
-#define CONFIG_AUTOBOOT_STOP_STR "s"
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_RESET_TO_RETRY 60
-
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_RUN
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_NISDOMAIN
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_NTPSERVER
-#define CONFIG_BOOTP_TIMEOFFSET
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */
-
-#define CONFIG_BOOTCOMMAND "run nfsboot"
-#define CONFIG_BOOTARGS "root=/dev/mtdblock5 ro rootfstype=jffs2"
-
-#define CONFIG_NFSBOOTCOMMAND "bootp; run nfsargs addcons;bootm"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "console_nr=0\0" \
- "dhcp_client_id=mvBOX-XP\0" \
- "dhcp_vendor-class-identifier=mvBOX\0" \
- "adminboot=setenv bootargs root=/dev/mtdblock5 rw rootfstype=jffs2;run addcons;bootm ffc00000\0" \
- "flashboot=setenv bootargs root=/dev/mtdblock5 ro rootfstype=jffs2;run addcons;bootm ffc00000\0" \
- "safeboot=setenv bootargs root=/dev/mtdblock2 rw rootfstype=cramfs;run addcons;bootm ffc00000\0" \
- "hdboot=setenv bootargs root=/dev/hda1;run addcons;bootm ffc00000\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \
- "addcons=setenv bootargs ${bootargs} console=ttyS${console_nr},${baudrate}N8\0" \
- "mv_version=" MV_VERSION "\0" \
- "bootretry=30\0"
-
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-
-#define CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP
-#define CONFIG_PCI_SCAN_SHOW
-
-#define CONFIG_NET_RETRY_COUNT 5
-
-#define CONFIG_TULIP
-#define CONFIG_TULIP_FIX_DAVICOM 1
-#define CONFIG_ETHADDR b6:b4:45:eb:fb:c0
-
-#define CONFIG_HW_WATCHDOG
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-#define CONFIG_SYS_FLASH_BASE 0xFFF00000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-
-#define CONFIG_SYS_MONITOR_LEN 0x00100000
-#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */
-
-/* Maximum amount of RAM. */
-#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 /* 0 .. 256MB of (S)DRAM */
-
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-#undef CONFIG_SYS_RAMBOOT
-#else
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_ISA_IO 0xFE000000
-
-/*
- * serial configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4600)
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- * For the detail description refer to the MPC8240 user's manual.
- */
-
-#define CONFIG_SYS_CLK_FREQ 33000000
-
-/* Bit-field values for MCCR1. */
-#define CONFIG_SYS_ROMNAL 7
-#define CONFIG_SYS_ROMFAL 11
-
-/* Bit-field values for MCCR2. */
-#define CONFIG_SYS_TSWAIT 0x5
-#define CONFIG_SYS_REFINT 430
-
-/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
-#define CONFIG_SYS_BSTOPRE 121
-
-/* Bit-field values for MCCR3. */
-#define CONFIG_SYS_REFREC 8
-
-/* Bit-field values for MCCR4. */
-#define CONFIG_SYS_PRETOACT 3
-#define CONFIG_SYS_ACTTOPRE 5
-#define CONFIG_SYS_ACTORW 3
-#define CONFIG_SYS_SDMODE_CAS_LAT 3
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-#define CONFIG_SYS_EXTROM 1
-#define CONFIG_SYS_REGDIMM 0
-#define CONFIG_SYS_DBUS_SIZE2 1
-#define CONFIG_SYS_SDMODE_WRAP 0
-
-#define CONFIG_SYS_PGMAX 0x32
-#define CONFIG_SYS_SDRAM_DSCD 0x20
-
-/* Memory bank settings.
- * Only bits 20-29 are actually used from these vales to set the
- * start/end addresses. The upper two bits will always be 0, and the lower
- * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
- * address. Refer to the MPC8240 book.
- */
-
-#define CONFIG_SYS_BANK0_START 0x00000000
-#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE 1
-#define CONFIG_SYS_BANK1_START 0x3ff00000
-#define CONFIG_SYS_BANK1_END 0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE 0
-#define CONFIG_SYS_BANK2_START 0x3ff00000
-#define CONFIG_SYS_BANK2_END 0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE 0
-#define CONFIG_SYS_BANK3_START 0x3ff00000
-#define CONFIG_SYS_BANK3_END 0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE 0
-#define CONFIG_SYS_BANK4_START 0x3ff00000
-#define CONFIG_SYS_BANK4_END 0x3fffffff
-#define CONFIG_SYS_BANK4_ENABLE 0
-#define CONFIG_SYS_BANK5_START 0x3ff00000
-#define CONFIG_SYS_BANK5_END 0x3fffffff
-#define CONFIG_SYS_BANK5_ENABLE 0
-#define CONFIG_SYS_BANK6_START 0x3ff00000
-#define CONFIG_SYS_BANK6_END 0x3fffffff
-#define CONFIG_SYS_BANK6_ENABLE 0
-#define CONFIG_SYS_BANK7_START 0x3ff00000
-#define CONFIG_SYS_BANK7_END 0x3fffffff
-#define CONFIG_SYS_BANK7_ENABLE 0
-
-#define CONFIG_SYS_ODCR 0xff
-
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#undef CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 63 /* Max number of sectors per flash */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 12000
-#define CONFIG_SYS_FLASH_WRITE_TOUT 1000
-
-
-#define CONFIG_ENV_IS_IN_FLASH
-
-#define CONFIG_ENV_OFFSET 0x00010000
-#define CONFIG_ENV_SIZE 0x00010000
-#define CONFIG_ENV_SECT_SIZE 0x00010000
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-#endif /* __CONFIG_H */
diff --git a/include/configs/Sandpoint8240.h b/include/configs/Sandpoint8240.h
deleted file mode 100644
index 2c0cb89..0000000
--- a/include/configs/Sandpoint8240.h
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * (C) Copyright 2001-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8240 1
-#define CONFIG_SANDPOINT 1
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-#define CONFIG_SYS_LDSCRIPT "board/sandpoint/u-boot.lds"
-
-#if 0
-#define USE_DINK32 1
-#else
-#undef USE_DINK32
-#endif
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 9600
-
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \"run net_nfs\" to mount root filesystem over NFS;" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "net_self=tftp ${kernel_addr} ${bootfile};" \
- "tftp ${ramdisk_addr} ${ramdisk};" \
- "run ramargs addip;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp ${kernel_addr} ${bootfile};" \
- "run nfsargs addip;bootm\0" \
- "rootpath=/opt/eldk/ppc_82xx\0" \
- "bootfile=/tftpboot/SP8240/uImage\0" \
- "ramdisk=/tftpboot/SP8240/uRamdisk\0" \
- "kernel_addr=200000\0" \
- "ramdisk_addr=400000\0" \
- ""
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_SNTP
-
-
-#define CONFIG_DRAM_SPEED 100 /* MHz */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
-#undef CONFIG_PCI_PNP
-
-
-#define CONFIG_EEPRO100
-#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-
-#define PCI_ENET0_IOADDR 0x80000000
-#define PCI_ENET0_MEMADDR 0x80000000
-#define PCI_ENET1_IOADDR 0x81000000
-#define PCI_ENET1_MEMADDR 0x81000000
-
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-
-#if defined (USE_DINK32)
-#define CONFIG_SYS_MONITOR_LEN 0x00030000
-#define CONFIG_SYS_MONITOR_BASE 0x00090000
-#define CONFIG_SYS_RAMBOOT 1
-#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#else
-#undef CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_MONITOR_LEN 0x00030000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-#endif
-
-#define CONFIG_SYS_FLASH_BASE 0xFFF00000
-#if 0
-#define CONFIG_SYS_FLASH_SIZE (512 * 1024) /* sandpoint has tiny eeprom */
-#else
-#define CONFIG_SYS_FLASH_SIZE (1024 * 1024) /* Unity has onboard 1MByte flash */
-#endif
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x00004000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x00002000 /* Total Size of Environment Sector */
-
-#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */
-
-#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */
-
-#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-
-#define CONFIG_SYS_ISA_MEM 0xFD000000
-#define CONFIG_SYS_ISA_IO 0xFE000000
-
-#define CONFIG_SYS_FLASH_RANGE_BASE 0xFF000000 /* flash memory address range */
-#define CONFIG_SYS_FLASH_RANGE_SIZE 0x01000000
-#define FLASH_BASE0_PRELIM 0xFFF00000 /* sandpoint flash */
-#define FLASH_BASE1_PRELIM 0xFF000000 /* PMC onboard flash */
-
-/*
- * select i2c support configuration
- *
- * Supported configurations are {none, software, hardware} drivers.
- * If the software driver is chosen, there are some additional
- * configuration items that the driver uses to drive the port pins.
- */
-#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#undef CONFIG_SYS_I2C_SOFT
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-#define CONFIG_SYS_I2C_SPEED 400000
-
-#ifdef CONFIG_SYS_I2C_SOFT
-#error "Soft I2C is not configured properly. Please review!"
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT_SPEED 50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
-#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
-#define I2C_ACTIVE (iop->pdir |= 0x00010000)
-#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
-#define I2C_READ ((iop->pdat & 0x00010000) != 0)
-#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \
- else iop->pdat &= ~0x00010000
-#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
- else iop->pdat &= ~0x00020000
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SYS_I2C_SOFT */
-
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* write page size */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* takes up to 10 msec */
-
-
-#define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-
-
-/* #define CONFIG_WINBOND_83C553 1 / *has a winbond bridge */
-#define CONFIG_SYS_USE_WINBOND_IDE 0 /*use winbond 83c553 internal IDE ctrlr */
-#define CONFIG_SYS_WINBOND_ISA_CFG_ADDR 0x80005800 /*pci-isa bridge config addr */
-#define CONFIG_SYS_WINBOND_IDE_CFG_ADDR 0x80005900 /*ide config addr */
-
-#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 2 IDE busses */
-#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
-
-/*
- * NS87308 Configuration
- */
-#define CONFIG_NS87308 /* Nat Semi super-io controller on ISA bus */
-
-#define CONFIG_SYS_NS87308_BADDR_10 1
-
-#define CONFIG_SYS_NS87308_DEVS ( CONFIG_SYS_NS87308_UART1 | \
- CONFIG_SYS_NS87308_UART2 | \
- CONFIG_SYS_NS87308_POWRMAN | \
- CONFIG_SYS_NS87308_RTC_APC )
-
-#undef CONFIG_SYS_NS87308_PS2MOD
-
-#define CONFIG_SYS_NS87308_CS0_BASE 0x0076
-#define CONFIG_SYS_NS87308_CS0_CONF 0x30
-#define CONFIG_SYS_NS87308_CS1_BASE 0x0075
-#define CONFIG_SYS_NS87308_CS1_CONF 0x30
-#define CONFIG_SYS_NS87308_CS2_BASE 0x0074
-#define CONFIG_SYS_NS87308_CS2_CONF 0x30
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-
-#define CONFIG_SYS_NS16550_CLK 1843200
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART1_BASE)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART2_BASE)
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
-#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 1
-
-#define CONFIG_SYS_ROMNAL 7 /*rom/flash next access time */
-#define CONFIG_SYS_ROMFAL 11 /*rom/flash access time */
-
-#define CONFIG_SYS_REFINT 430 /* no of clock cycles between CBR refresh cycles */
-
-/* the following are for SDRAM only*/
-#define CONFIG_SYS_BSTOPRE 121 /* Burst To Precharge, sets open page interval */
-#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */
-#define CONFIG_SYS_RDLAT 4 /* data latency from read command */
-#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */
-#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */
-#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */
-#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
-#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */
-#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* SDMODE Burst length 2=4, 3=8 */
-
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-
-/* memory bank settings*/
-/*
- * only bits 20-29 are actually used from these vales to set the
- * start/end address the upper two bits will be 0, and the lower 20
- * bits will be set to 0x00000 for a start address, or 0xfffff for an
- * end address
- */
-#define CONFIG_SYS_BANK0_START 0x00000000
-#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE 1
-#define CONFIG_SYS_BANK1_START 0x3ff00000
-#define CONFIG_SYS_BANK1_END 0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE 0
-#define CONFIG_SYS_BANK2_START 0x3ff00000
-#define CONFIG_SYS_BANK2_END 0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE 0
-#define CONFIG_SYS_BANK3_START 0x3ff00000
-#define CONFIG_SYS_BANK3_END 0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE 0
-#define CONFIG_SYS_BANK4_START 0x00000000
-#define CONFIG_SYS_BANK4_END 0x00000000
-#define CONFIG_SYS_BANK4_ENABLE 0
-#define CONFIG_SYS_BANK5_START 0x00000000
-#define CONFIG_SYS_BANK5_END 0x00000000
-#define CONFIG_SYS_BANK5_ENABLE 0
-#define CONFIG_SYS_BANK6_START 0x00000000
-#define CONFIG_SYS_BANK6_END 0x00000000
-#define CONFIG_SYS_BANK6_ENABLE 0
-#define CONFIG_SYS_BANK7_START 0x00000000
-#define CONFIG_SYS_BANK7_END 0x00000000
-#define CONFIG_SYS_BANK7_ENABLE 0
-/*
- * Memory bank enable bitmask, specifying which of the banks defined above
- are actually present. MSB is for bank #7, LSB is for bank #0.
- */
-#define CONFIG_SYS_BANK_ENABLE 0x01
-
-#define CONFIG_SYS_ODCR 0xff /* configures line driver impedances, */
- /* see 8240 book for bit definitions */
-#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */
- /* currently accessed page in memory */
- /* see 8240 book for details */
-
-/* SDRAM 0 - 256MB */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* stack in DCACHE @ 1GB (no backing mem) */
-#if defined(USE_DINK32)
-#define CONFIG_SYS_IBAT1L (0x40000000 | BATL_PP_00 )
-#define CONFIG_SYS_IBAT1U (0x40000000 | BATU_BL_128K )
-#else
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#endif
-
-/* PCI memory */
-#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* Flash, config addrs, etc */
-#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 20 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8240 CPU */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/* values according to the manual */
-
-#define CONFIG_DRAM_50MHZ 1
-#define CONFIG_SDRAM_50MHZ
-
-#undef NR_8259_INTS
-#define NR_8259_INTS 1
-
-
-#define CONFIG_DISK_SPINUP_TIME 1000000
-
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h
deleted file mode 100644
index 2664d5b..0000000
--- a/include/configs/Sandpoint8245.h
+++ /dev/null
@@ -1,376 +0,0 @@
-/*
- * (C) Copyright 2001-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8245 1
-#define CONFIG_SANDPOINT 1
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-#define CONFIG_SYS_LDSCRIPT "board/sandpoint/u-boot.lds"
-
-#if 0
-#define USE_DINK32 1
-#else
-#undef USE_DINK32
-#endif
-
-#define CONFIG_CONS_INDEX 3 /* set to '3' for on-chip DUART */
-#define CONFIG_BAUDRATE 9600
-#define CONFIG_DRAM_SPEED 100 /* MHz */
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_SNTP
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
-#undef CONFIG_PCI_PNP
-
-
-#define CONFIG_EEPRO100
-#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-#define CONFIG_NATSEMI
-#define CONFIG_NS8382X
-
-#define PCI_ENET0_IOADDR 0x80000000
-#define PCI_ENET0_MEMADDR 0x80000000
-#define PCI_ENET1_IOADDR 0x81000000
-#define PCI_ENET1_MEMADDR 0x81000000
-
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-
-#if defined (USE_DINK32)
-#define CONFIG_SYS_MONITOR_LEN 0x00030000
-#define CONFIG_SYS_MONITOR_BASE 0x00090000
-#define CONFIG_SYS_RAMBOOT 1
-#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#else
-#undef CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_MONITOR_LEN 0x00030000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-#endif
-
-#define CONFIG_SYS_FLASH_BASE 0xFFF00000
-#if 0
-#define CONFIG_SYS_FLASH_SIZE (512 * 1024) /* sandpoint has tiny eeprom */
-#else
-#define CONFIG_SYS_FLASH_SIZE (1024 * 1024) /* Unity has onboard 1MByte flash */
-#endif
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x00004000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x00002000 /* Total Size of Environment Sector */
-
-#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */
-
-#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */
-
-#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-
-#define CONFIG_SYS_ISA_MEM 0xFD000000
-#define CONFIG_SYS_ISA_IO 0xFE000000
-
-#define CONFIG_SYS_FLASH_RANGE_BASE 0xFF000000 /* flash memory address range */
-#define CONFIG_SYS_FLASH_RANGE_SIZE 0x01000000
-#define FLASH_BASE0_PRELIM 0xFFF00000 /* sandpoint flash */
-#define FLASH_BASE1_PRELIM 0xFF000000 /* PMC onboard flash */
-
-/*
- * select i2c support configuration
- *
- * Supported configurations are {none, software, hardware} drivers.
- * If the software driver is chosen, there are some additional
- * configuration items that the driver uses to drive the port pins.
- */
-#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#undef CONFIG_SYS_I2C_SOFT
-#define CONFIG_SYS_I2C_SPEED 400000
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-#ifdef CONFIG_SYS_I2C_SOFT
-#error "Soft I2C is not configured properly. Please review!"
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT_SPEED 50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE
-#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
-#define I2C_ACTIVE (iop->pdir |= 0x00010000)
-#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
-#define I2C_READ ((iop->pdat & 0x00010000) != 0)
-#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \
- else iop->pdat &= ~0x00010000
-#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
- else iop->pdat &= ~0x00020000
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SYS_I2C_SOFT */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-
-#define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-
-
-/* #define CONFIG_WINBOND_83C553 1 / *has a winbond bridge */
-#define CONFIG_SYS_USE_WINBOND_IDE 0 /*use winbond 83c553 internal IDE ctrlr */
-#define CONFIG_SYS_WINBOND_ISA_CFG_ADDR 0x80005800 /*pci-isa bridge config addr */
-#define CONFIG_SYS_WINBOND_IDE_CFG_ADDR 0x80005900 /*ide config addr */
-
-#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 2 IDE busses */
-#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
-
-/*
- * NS87308 Configuration
- */
-#define CONFIG_NS87308 /* Nat Semi super-io controller on ISA bus */
-
-#define CONFIG_SYS_NS87308_BADDR_10 1
-
-#define CONFIG_SYS_NS87308_DEVS ( CONFIG_SYS_NS87308_UART1 | \
- CONFIG_SYS_NS87308_UART2 | \
- CONFIG_SYS_NS87308_POWRMAN | \
- CONFIG_SYS_NS87308_RTC_APC )
-
-#undef CONFIG_SYS_NS87308_PS2MOD
-
-#define CONFIG_SYS_NS87308_CS0_BASE 0x0076
-#define CONFIG_SYS_NS87308_CS0_CONF 0x30
-#define CONFIG_SYS_NS87308_CS1_BASE 0x0075
-#define CONFIG_SYS_NS87308_CS1_CONF 0x30
-#define CONFIG_SYS_NS87308_CS2_BASE 0x0074
-#define CONFIG_SYS_NS87308_CS2_CONF 0x30
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-
-#if (CONFIG_CONS_INDEX > 2)
-#define CONFIG_SYS_NS16550_CLK CONFIG_DRAM_SPEED*1000000
-#else
-#define CONFIG_SYS_NS16550_CLK 1843200
-#endif
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART1_BASE)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART2_BASE)
-#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_EUMB_ADDR + 0x4500)
-#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_EUMB_ADDR + 0x4600)
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
-
-#define CONFIG_SYS_ROMNAL 7 /*rom/flash next access time */
-#define CONFIG_SYS_ROMFAL 11 /*rom/flash access time */
-
-#define CONFIG_SYS_REFINT 430 /* no of clock cycles between CBR refresh cycles */
-
-/* the following are for SDRAM only*/
-#define CONFIG_SYS_BSTOPRE 121 /* Burst To Precharge, sets open page interval */
-#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */
-#define CONFIG_SYS_RDLAT 4 /* data latency from read command */
-#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */
-#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */
-#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */
-#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
-#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */
-#if 0
-#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* OBSOLETE! SDMODE Burst length 2=4, 3=8 */
-#endif
-
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-#define CONFIG_SYS_EXTROM 1
-#define CONFIG_SYS_REGDIMM 0
-
-
-/* memory bank settings*/
-/*
- * only bits 20-29 are actually used from these vales to set the
- * start/end address the upper two bits will be 0, and the lower 20
- * bits will be set to 0x00000 for a start address, or 0xfffff for an
- * end address
- */
-#define CONFIG_SYS_BANK0_START 0x00000000
-#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE 1
-#define CONFIG_SYS_BANK1_START 0x3ff00000
-#define CONFIG_SYS_BANK1_END 0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE 0
-#define CONFIG_SYS_BANK2_START 0x3ff00000
-#define CONFIG_SYS_BANK2_END 0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE 0
-#define CONFIG_SYS_BANK3_START 0x3ff00000
-#define CONFIG_SYS_BANK3_END 0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE 0
-#define CONFIG_SYS_BANK4_START 0x00000000
-#define CONFIG_SYS_BANK4_END 0x00000000
-#define CONFIG_SYS_BANK4_ENABLE 0
-#define CONFIG_SYS_BANK5_START 0x00000000
-#define CONFIG_SYS_BANK5_END 0x00000000
-#define CONFIG_SYS_BANK5_ENABLE 0
-#define CONFIG_SYS_BANK6_START 0x00000000
-#define CONFIG_SYS_BANK6_END 0x00000000
-#define CONFIG_SYS_BANK6_ENABLE 0
-#define CONFIG_SYS_BANK7_START 0x00000000
-#define CONFIG_SYS_BANK7_END 0x00000000
-#define CONFIG_SYS_BANK7_ENABLE 0
-/*
- * Memory bank enable bitmask, specifying which of the banks defined above
- are actually present. MSB is for bank #7, LSB is for bank #0.
- */
-#define CONFIG_SYS_BANK_ENABLE 0x01
-
-#define CONFIG_SYS_ODCR 0xff /* configures line driver impedances, */
- /* see 8240 book for bit definitions */
-#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */
- /* currently accessed page in memory */
- /* see 8240 book for details */
-
-/* SDRAM 0 - 256MB */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* stack in DCACHE @ 1GB (no backing mem) */
-#if defined(USE_DINK32)
-#define CONFIG_SYS_IBAT1L (0x40000000 | BATL_PP_00 )
-#define CONFIG_SYS_IBAT1U (0x40000000 | BATU_BL_128K )
-#else
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#endif
-
-/* PCI memory */
-#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* Flash, config addrs, etc */
-#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 20 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8240 CPU */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/* values according to the manual */
-
-#define CONFIG_DRAM_50MHZ 1
-#define CONFIG_SDRAM_50MHZ
-
-#undef NR_8259_INTS
-#define NR_8259_INTS 1
-
-
-#define CONFIG_DISK_SPINUP_TIME 1000000
-
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h
deleted file mode 100644
index 940be1f..0000000
--- a/include/configs/eXalion.h
+++ /dev/null
@@ -1,433 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-/* #define CONFIG_MPC8240 1 */
-#define CONFIG_MPC8245 1
-#define CONFIG_EXALION 1
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-#if defined (CONFIG_MPC8240)
- /* #warning ---------- eXalion with MPC8240 --------------- */
-#elif defined (CONFIG_MPC8245)
- /* #warning ++++++++++ eXalion with MPC8245 +++++++++++++++ */
-#elif defined (CONFIG_MPC8245) && defined (CONFIG_MPC8245)
-#error #### Both types of MPC824x defined (CONFIG_8240 and CONFIG_8245)
-#else
-#error #### Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-/* older kernels need clock in MHz newer in Hz */
- /* #define CONFIG_CLOCKS_IN_MHZ 1 */ /* clocks passsed to Linux in MHz */
-#undef CONFIG_CLOCKS_IN_MHZ
-
-#define CONFIG_BOOTDELAY 10
-
-
- /*#define CONFIG_DRAM_SPEED 66 */ /* MHz */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_PCI
-
-
-/*-----------------------------------------------------------------------
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 8 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
-#define CONFIG_MISC_INIT_R 1
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 /* 1 GBytes - initdram() will */
- /* return real value. */
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-
-#undef CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-#define CONFIG_SYS_INIT_DATA_SIZE 128
-
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_INIT_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_DATA_SIZE)
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-
-#if defined (CONFIG_MPC8240)
-#define CONFIG_SYS_FLASH_BASE 0xFFE00000
-#define CONFIG_SYS_FLASH_SIZE (2 * 1024 * 1024) /* onboard 2MByte flash */
-#elif defined (CONFIG_MPC8245)
-#define CONFIG_SYS_FLASH_BASE 0xFFC00000
-#define CONFIG_SYS_FLASH_SIZE (4 * 1024 * 1024) /* onboard 4MByte flash */
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* Size of one Flash sector */
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE /* Use one Flash sector for environment */
-#define CONFIG_ENV_ADDR 0xFFFC0000
-#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */
-
-#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
-
-#define CONFIG_SYS_ALT_MEMTEST 1 /* use real memory test */
-#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
-
-#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-
-/* #define CONFIG_SYS_ISA_MEM 0xFD000000 */
-#define CONFIG_SYS_ISA_IO 0xFE000000
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* Max number of sectors per flash */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE
-#define FLASH_BASE1_PRELIM 0
-
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
-#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */
-#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware protection */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- */
-#define CONFIG_PCI 1 /* include pci support */
-#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
-#undef CONFIG_PCI_PNP
-
-
-#define CONFIG_EEPRO100 1
-
-#define PCI_ENET0_MEMADDR 0x80000000 /* Intel 82559ER */
-#define PCI_ENET0_IOADDR 0x80000000
-#define PCI_ENET1_MEMADDR 0x81000000 /* Intel 82559ER */
-#define PCI_ENET1_IOADDR 0x81000000
-#define PCI_ENET2_MEMADDR 0x82000000 /* Broadcom BCM569xx */
-#define PCI_ENET2_IOADDR 0x82000000
-#define PCI_ENET3_MEMADDR 0x83000000 /* Broadcom BCM56xx */
-#define PCI_ENET3_IOADDR 0x83000000
-
-/*-----------------------------------------------------------------------
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550 1
-#define CONFIG_SYS_NS16550_SERIAL 1
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 38400
-
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-
-#if (CONFIG_CONS_INDEX == 1)
-#define CONFIG_SYS_NS16550_CLK 1843200 /* COM1 only ! */
-#else
-#define CONFIG_SYS_NS16550_CLK ({ extern ulong get_bus_freq (ulong); get_bus_freq (0); })
-#endif
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_ISA_IO + 0x3F8)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4500)
-#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_EUMB_ADDR + 0x4600)
-
-/*-----------------------------------------------------------------------
- * select i2c support configuration
- *
- * Supported configurations are {none, software, hardware} drivers.
- * If the software driver is chosen, there are some additional
- * configuration items that the driver uses to drive the port pins.
- */
-#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-
-/*-----------------------------------------------------------------------
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
-#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2 /* for MPC8240 only */
-
- /*#define CONFIG_133MHZ_DRAM 1 */ /* For 133 MHZ DRAM only !!!!!!!!!!! */
-
-#if defined (CONFIG_MPC8245)
-/* Bit-field values for PMCR2. */
-#if defined (CONFIG_133MHZ_DRAM)
-#define CONFIG_SYS_DLL_EXTEND 0x80 /* use DLL extended range - 133MHz only */
-#define CONFIG_SYS_PCI_HOLD_DEL 0x20 /* delay and hold timing - 133MHz only */
-#endif
-
-/* Bit-field values for MIOCR1. */
-#if !defined (CONFIG_133MHZ_DRAM)
-#define CONFIG_SYS_DLL_MAX_DELAY 0x04 /* longer DLL delay line - 66MHz only */
-#endif
-/* Bit-field values for MIOCR2. */
-#define CONFIG_SYS_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay */
- /* - note bottom 3 bits MUST be 0 */
-#endif
-
-/* Bit-field values for MCCR1. */
-#define CONFIG_SYS_ROMNAL 7 /*rom/flash next access time */
-#define CONFIG_SYS_ROMFAL 11 /*rom/flash access time */
-
-/* Bit-field values for MCCR2. */
-#define CONFIG_SYS_TSWAIT 0x5 /* Transaction Start Wait States timer */
-#if defined (CONFIG_133MHZ_DRAM)
-#define CONFIG_SYS_REFINT 1300 /* no of clock cycles between CBR */
-#else /* refresh cycles */
-#define CONFIG_SYS_REFINT 750
-#endif
-
-/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
-#if defined (CONFIG_133MHZ_DRAM)
-#define CONFIG_SYS_BSTOPRE 1023
-#else
-#define CONFIG_SYS_BSTOPRE 250
-#endif
-
-/* Bit-field values for MCCR3. */
-/* the following are for SDRAM only */
-
-#if defined (CONFIG_133MHZ_DRAM)
-#define CONFIG_SYS_REFREC 9 /* Refresh to activate interval */
-#else
-#define CONFIG_SYS_REFREC 5 /* Refresh to activate interval */
-#endif
-#if defined (CONFIG_MPC8240)
-#define CONFIG_SYS_RDLAT 2 /* data latency from read command */
-#endif
-
-/* Bit-field values for MCCR4. */
-#if defined (CONFIG_133MHZ_DRAM)
-#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */
-#define CONFIG_SYS_ACTTOPRE 7 /* Activate to Precharge interval */
-#define CONFIG_SYS_ACTORW 5 /* Activate to R/W */
-#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
-#else
-#if 0
-#define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval */
-#define CONFIG_SYS_ACTTOPRE 3 /* Activate to Precharge interval */
-#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */
-#define CONFIG_SYS_SDMODE_CAS_LAT 2 /* SDMODE CAS latency */
-#endif
-#define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval */
-#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */
-#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */
-#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
-#endif
-#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */
-#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* SDMODE Burst length 2=4, 3=8 */
-#define CONFIG_SYS_REGDIMM 0
-#if defined (CONFIG_MPC8240)
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 0
-#elif defined (CONFIG_MPC8245)
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-#define CONFIG_SYS_EXTROM 0
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-
-
-/*-----------------------------------------------------------------------
- memory bank settings
- * only bits 20-29 are actually used from these vales to set the
- * start/end address the upper two bits will be 0, and the lower 20
- * bits will be set to 0x00000 for a start address, or 0xfffff for an
- * end address
- */
-#define CONFIG_SYS_BANK0_START 0x00000000
-#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE 1
-#define CONFIG_SYS_BANK1_START 0x3ff00000
-#define CONFIG_SYS_BANK1_END 0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE 0
-#define CONFIG_SYS_BANK2_START 0x3ff00000
-#define CONFIG_SYS_BANK2_END 0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE 0
-#define CONFIG_SYS_BANK3_START 0x3ff00000
-#define CONFIG_SYS_BANK3_END 0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE 0
-#define CONFIG_SYS_BANK4_START 0x00000000
-#define CONFIG_SYS_BANK4_END 0x00000000
-#define CONFIG_SYS_BANK4_ENABLE 0
-#define CONFIG_SYS_BANK5_START 0x00000000
-#define CONFIG_SYS_BANK5_END 0x00000000
-#define CONFIG_SYS_BANK5_ENABLE 0
-#define CONFIG_SYS_BANK6_START 0x00000000
-#define CONFIG_SYS_BANK6_END 0x00000000
-#define CONFIG_SYS_BANK6_ENABLE 0
-#define CONFIG_SYS_BANK7_START 0x00000000
-#define CONFIG_SYS_BANK7_END 0x00000000
-#define CONFIG_SYS_BANK7_ENABLE 0
-
-/*-----------------------------------------------------------------------
- * Memory bank enable bitmask, specifying which of the banks defined above
- are actually present. MSB is for bank #7, LSB is for bank #0.
- */
-#define CONFIG_SYS_BANK_ENABLE 0x01
-
-#if defined (CONFIG_MPC8240)
-#define CONFIG_SYS_ODCR 0xDF /* configures line driver impedances, */
- /* see 8240 book for bit definitions */
-#elif defined (CONFIG_MPC8245)
-#if defined (CONFIG_133MHZ_DRAM)
-#define CONFIG_SYS_ODCR 0xFE /* configures line driver impedances - 133MHz */
-#else
-#define CONFIG_SYS_ODCR 0xDE /* configures line driver impedances - 66MHz */
-#endif
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-
-#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */
- /* currently accessed page in memory */
- /* see 8240 book for details */
-
-/*-----------------------------------------------------------------------
- * Block Address Translation (BAT) register settings.
- */
-/* SDRAM 0 - 256MB */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* stack in DCACHE @ 1GB (no backing mem) */
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-/* PCI memory */
-#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* Flash, config addrs, etc */
-#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/* values according to the manual */
-#define CONFIG_DRAM_50MHZ 1
-#define CONFIG_SDRAM_50MHZ
-
-#undef NR_8259_INTS
-#define NR_8259_INTS 1
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff
- */
-#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 2 IDE busses */
-#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*1) /* max. 2 drives per IDE bus */
-
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ISA_IO /* base address */
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */
-#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0170 /* ide1 offset */
-#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* data reg offset */
-#define CONFIG_SYS_ATA_REG_OFFSET 0 /* reg offset */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x200 /* alternate register offset */
-
-#define CONFIG_ATAPI
-
-#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
-#undef CONFIG_IDE_LED /* no led for ide supported */
-#undef CONFIG_IDE_RESET /* reset for ide supported... */
-#undef CONFIG_IDE_RESET_ROUTINE /* with a special reset function */
-
-/*-----------------------------------------------------------------------
- * DISK Partition support
- */
-#define CONFIG_DOS_PARTITION
-
-/*-----------------------------------------------------------------------
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
deleted file mode 100644
index 5be62ec..0000000
--- a/include/configs/utx8245.h
+++ /dev/null
@@ -1,408 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * Gregory E. Allen, gallen@arlut.utexas.edu
- * Matthew E. Karger, karger@arlut.utexas.edu
- * Applied Research Laboratories, The University of Texas at Austin
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- *
- * Configuration settings for the utx8245 board.
- *
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8245 1
-#define CONFIG_UTX8245 1
-
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-
-#define DEBUG 1
-
-#define CONFIG_IDENT_STRING " [UTX5] "
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 57600
-
-#define CONFIG_BOOTDELAY 2
-#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay
-#define CONFIG_BOOTCOMMAND "run nfsboot" /* autoboot command */
-#define CONFIG_BOOTARGS "root=/dev/ram console=ttyS0,57600" /* RAMdisk */
-#define CONFIG_ETHADDR 00:AA:00:14:00:05 /* UTX5 */
-#define CONFIG_SERVERIP 10.8.17.105 /* Spree */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel_addr=FFA00000\0" \
- "ramdisk_addr=FF800000\0" \
- "u-boot_startaddr=FFB00000\0" \
- "u-boot_endaddr=FFB2FFFF\0" \
- "nfsargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/nfs rw \
-nfsroot=${nfsrootip}:${rootpath} ip=dhcp\0" \
- "ramargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/ram0\0" \
- "smargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/mtdblock1 ro\0" \
- "fwargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/sda2 ro\0" \
- "nfsboot=run nfsargs;bootm ${kernel_addr}\0" \
- "ramboot=run ramargs;bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "smboot=run smargs;bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "fwboot=run fwargs;bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "update_u-boot=tftp ${loadaddr} /bdi2000/u-boot.bin;protect off \
-${u-boot_startaddr} ${u-boot_endaddr};era ${u-boot_startaddr} \
-${u-boot_endaddr};cp.b ${loadaddr} ${u-boot_startaddr} ${filesize};\
-protect on ${u-boot_startaddr} ${u-boot_endaddr}"
-
-#define CONFIG_ENV_OVERWRITE
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_DATE
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */
-
-
-/*-----------------------------------------------------------------------
- * PCI configuration
- *-----------------------------------------------------------------------
- */
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
-#undef CONFIG_PCI_PNP
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_EEPRO100
-#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-#define CONFIG_EEPRO100_SROM_WRITE
-
-#define PCI_ENET0_IOADDR 0xF0000000
-#define PCI_ENET0_MEMADDR 0xF0000000
-
-#define PCI_FIREWIRE_IOADDR 0xF1000000
-#define PCI_FIREWIRE_MEMADDR 0xF1000000
-/*
-#define PCI_ENET0_IOADDR 0xFE000000
-#define PCI_ENET0_MEMADDR 0x80000000
-
-#define PCI_FIREWIRE_IOADDR 0x81000000
-#define PCI_FIREWIRE_MEMADDR 0x81000000
-*/
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 /* 256MB */
-/*#define CONFIG_SYS_VERY_BIG_RAM 1 */
-
-/* FLASH_BASE is FF800000, with 4MB on RCS0, but the reset vector
- * is actually located at FFF00100. Therefore, U-Boot is
- * physically located at 0xFFB0_0000, but is also mirrored at
- * 0xFFF0_0000.
- */
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-
-#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*#define CONFIG_SYS_DRAM_TEST 1 */
-#define CONFIG_SYS_MEMTEST_START 0x00003000 /* memtest works on 0...256 MB */
-#define CONFIG_SYS_MEMTEST_END 0x0ff8ffa7 /* in SDRAM, skips exception */
- /* vectors and U-Boot */
-
-
-/*--------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- *------------------------------------------------------------------*/
-#define CONFIG_SYS_INIT_DATA_SIZE 128 /* Size in bytes reserved for */
- /* initial data */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_INIT_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_DATA_SIZE)
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/*--------------------------------------------------------------------
- * NS16550 Configuration
- *------------------------------------------------------------------*/
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-
-#if (CONFIG_CONS_INDEX == 1 || CONFIG_CONS_INDEX == 2)
-# define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-#else
-# define CONFIG_SYS_NS16550_CLK 33000000
-#endif
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4600)
-#define CONFIG_SYS_NS16550_COM3 0xFF000000
-#define CONFIG_SYS_NS16550_COM4 0xFF000008
-
-/*--------------------------------------------------------------------
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- * For the detail description refer to the MPC8240 user's manual.
- *------------------------------------------------------------------*/
-
-#define CONFIG_SYS_CLK_FREQ 33000000
-
-/*#define CONFIG_SYS_ETH_DEV_FN 0x7800 */
-/*#define CONFIG_SYS_ETH_IOBASE 0x00104000 */
-
-/*--------------------------------------------------------------------
- * I2C Configuration
- *------------------------------------------------------------------*/
-#if 1
-#define CONFIG_HARD_I2C 1 /* To enable I2C support */
-#define CONFIG_SYS_I2C_SPEED 400000
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-#endif
-
-#define CONFIG_RTC_PCF8563 1 /* enable I2C support for */
- /* Philips PCF8563 RTC */
-#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */
-
-/*--------------------------------------------------------------------
- * Memory Control Configuration Register values
- * - see sec. 4.12 of MPC8245 UM
- *------------------------------------------------------------------*/
-
-/**** MCCR1 ****/
-#define CONFIG_SYS_ROMNAL 0
-#define CONFIG_SYS_ROMFAL 10 /* (tacc=70ns)*mem_freq - 2,
- mem_freq = 100MHz */
-
-#define CONFIG_SYS_BANK7_ROW 0 /* SDRAM bank 7-0 row address */
-#define CONFIG_SYS_BANK6_ROW 0 /* bit count */
-#define CONFIG_SYS_BANK5_ROW 0
-#define CONFIG_SYS_BANK4_ROW 0
-#define CONFIG_SYS_BANK3_ROW 0
-#define CONFIG_SYS_BANK2_ROW 0
-#define CONFIG_SYS_BANK1_ROW 2
-#define CONFIG_SYS_BANK0_ROW 2
-
-/**** MCCR2, refresh interval clock cycles ****/
-#define CONFIG_SYS_REFINT 480 /* 33 MHz SDRAM clock was 480 */
-
-/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
-#define CONFIG_SYS_BSTOPRE 1023 /* burst to precharge[0..9], */
- /* sets open page interval */
-
-/**** MCCR3 ****/
-#define CONFIG_SYS_REFREC 7 /* Refresh to activate interval, trc */
-
-/**** MCCR4 ****/
-#define CONFIG_SYS_PRETOACT 2 /* trp */
-#define CONFIG_SYS_ACTTOPRE 7 /* trcd + (burst length - 1) + trdl */
-#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */
-#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type, sequential */
-#define CONFIG_SYS_ACTORW 2 /* trcd min */
-#define CONFIG_SYS_DBUS_SIZE2 1 /* set for 8-bit RCS1, clear for 32,64 */
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-#define CONFIG_SYS_EXTROM 0 /* we don't need extended ROM space */
-#define CONFIG_SYS_REGDIMM 0
-
-/* calculate according to formula in sec. 6-22 of 8245 UM */
-#define CONFIG_SYS_PGMAX 50 /* how long the 8245 retains the */
- /* currently accessed page in memory */
- /* was 45 */
-
-#define CONFIG_SYS_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note */
- /* bits 7,6, and 3-0 MUST be 0 */
-
-#if 0
-#define CONFIG_SYS_DLL_MAX_DELAY 0x04
-#else
-#define CONFIG_SYS_DLL_MAX_DELAY 0
-#endif
-#if 0 /* need for 33MHz SDRAM */
-#define CONFIG_SYS_DLL_EXTEND 0x80
-#else
-#define CONFIG_SYS_DLL_EXTEND 0
-#endif
-#define CONFIG_SYS_PCI_HOLD_DEL 0x20
-
-
-/* Memory bank settings.
- * Only bits 20-29 are actually used from these values to set the
- * start/end addresses. The upper two bits will always be 0, and the lower
- * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
- * address. Refer to the MPC8245 user manual.
- */
-
-#define CONFIG_SYS_BANK0_START 0x00000000
-#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE/2 - 1)
-#define CONFIG_SYS_BANK0_ENABLE 1
-#define CONFIG_SYS_BANK1_START CONFIG_SYS_MAX_RAM_SIZE/2
-#define CONFIG_SYS_BANK1_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK1_ENABLE 1
-#define CONFIG_SYS_BANK2_START 0x3ff00000 /* not available in this design */
-#define CONFIG_SYS_BANK2_END 0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE 0
-#define CONFIG_SYS_BANK3_START 0x3ff00000
-#define CONFIG_SYS_BANK3_END 0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE 0
-#define CONFIG_SYS_BANK4_START 0x3ff00000
-#define CONFIG_SYS_BANK4_END 0x3fffffff
-#define CONFIG_SYS_BANK4_ENABLE 0
-#define CONFIG_SYS_BANK5_START 0x3ff00000
-#define CONFIG_SYS_BANK5_END 0x3fffffff
-#define CONFIG_SYS_BANK5_ENABLE 0
-#define CONFIG_SYS_BANK6_START 0x3ff00000
-#define CONFIG_SYS_BANK6_END 0x3fffffff
-#define CONFIG_SYS_BANK6_ENABLE 0
-#define CONFIG_SYS_BANK7_START 0x3ff00000
-#define CONFIG_SYS_BANK7_END 0x3fffffff
-#define CONFIG_SYS_BANK7_ENABLE 0
-
-/*--------------------------------------------------------------------*/
-/* 4.4 - Output Driver Control Register */
-/*--------------------------------------------------------------------*/
-#define CONFIG_SYS_ODCR 0xe5
-
-/*--------------------------------------------------------------------*/
-/* 4.8 - Error Handling Registers */
-/*-------------------------------CONFIG_SYS_SDMODE_BURSTLEN-------------------------------------*/
-#define CONFIG_SYS_ERRENR1 0x11 /* enable SDRAM refresh overflow error */
-
-/* SDRAM 0-256 MB */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-/*#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_CACHEINHIBIT) */
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* stack in dcache */
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-
-
-#define CONFIG_SYS_IBAT2L (CONFIG_SYS_SDRAM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT2U (CONFIG_SYS_SDRAM_BASE + 0x10000000| BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* PCI memory */
-/*#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) */
-/*#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) */
-
-/*Flash, config addrs, etc. */
-#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_FLASH_BASE 0xFF800000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */
-
-/* NOTE: environment is not EMBEDDED in the u-boot code.
- It's stored in flash in its own separate sector. */
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-#if 1 /* AMD AM29LV033C */
-#define CONFIG_SYS_MAX_FLASH_SECT 64 /* Max number of sectors in one bank */
-#define CONFIG_ENV_ADDR 0xFFBF0000 /* flash sector SA63 */
-#define CONFIG_ENV_SECT_SIZE (64*1024) /* Size of the Environment Sector */
-#else /* AMD AM29LV116D */
-#define CONFIG_SYS_MAX_FLASH_SECT 35 /* Max number of sectors in one bank */
-#define CONFIG_ENV_ADDR 0xFF9FA000 /* flash sector SA33 */
-#define CONFIG_ENV_SECT_SIZE (8*1024) /* Size of the Environment Sector */
-#endif /* #if */
-
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE /* Size of the Environment */
-#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-#undef CONFIG_SYS_RAMBOOT
-#else
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-#endif /* __CONFIG_H */
diff --git a/include/mpc824x.h b/include/mpc824x.h
deleted file mode 100644
index 31d6f69..0000000
--- a/include/mpc824x.h
+++ /dev/null
@@ -1,523 +0,0 @@
-/*
- * Copyright Rob Taylor, Flying Pig Systems Ltd. 2000.
- * Copyright (C) 2001, James Dougherty, jfd@cs.stanford.edu
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __MPC824X_H__
-#define __MPC824X_H__
-
-#include <config.h>
-
-/* CPU Types */
-#define CPU_TYPE_601 0x01 /* PPC 601 CPU */
-#define CPU_TYPE_602 0x02 /* PPC 602 CPU */
-#define CPU_TYPE_603 0x03 /* PPC 603 CPU */
-#define CPU_TYPE_603E 0x06 /* PPC 603e CPU */
-#define CPU_TYPE_603P 0x07 /* PPC 603p CPU */
-#define CPU_TYPE_604 0x04 /* PPC 604 CPU */
-#define CPU_TYPE_604E 0x09 /* PPC 604e CPU */
-#define CPU_TYPE_604R 0x0a /* PPC 604r CPU */
-#define CPU_TYPE_750 0x08 /* PPC 750 CPU */
-#define CPU_TYPE_8240 0x81 /* PPC 8240 CPU */
-#define CPU_TYPE_8245 0x8081 /* PPC 8245/8241 CPU */
-#define _CACHE_ALIGN_SIZE 32 /* cache line size */
-
-/* spr976 - DMISS data tlb miss address register
- * spr977 - DCMP data tlb miss compare register
- * spr978 - HASH1 PTEG1 address register
- * spr980 - HASH2 PTEG2 address register
- * IMISS - instruction tlb miss address register
- * ICMP - instruction TLB mis compare register
- * RPA - real page address register
- * HID0 - hardware implemntation register
- * HID2 - instruction address breakpoint register
- */
-
-/* Kahlua/MPC8240 defines */
-#define VEN_DEV_ID 0x00021057 /* Vendor and Dev. ID for MPC106 */
-#define KAHLUA_ID 0x00031057 /* Vendor & Dev Id for Kahlua's PCI */
-#define KAHLUA2_ID 0x00061057 /* 8245 is aka Kahlua-2 */
-#define BMC_BASE 0x80000000 /* Kahlua ID in PCI Memory space */
-#define CHRP_REG_ADDR 0xfec00000 /* MPC107 Config, Map B */
-#define CHRP_REG_DATA 0xfee00000 /* MPC107 Config, Map B */
-#define CHRP_ISA_MEM_PHYS 0xfd000000
-#define CHRP_ISA_MEM_BUS 0x00000000
-#define CHRP_ISA_MEM_SIZE 0x01000000
-#define CHRP_ISA_IO_PHYS 0xfe000000
-#define CHRP_ISA_IO_BUS 0x00000000
-#define CHRP_ISA_IO_SIZE 0x00800000
-#define CHRP_PCI_IO_PHYS 0xfe800000
-#define CHRP_PCI_IO_BUS 0x00800000
-#define CHRP_PCI_IO_SIZE 0x00400000
-#define CHRP_PCI_MEM_PHYS 0x80000000
-#define CHRP_PCI_MEM_BUS 0x80000000
-#define CHRP_PCI_MEM_SIZE 0x7d000000
-#define CHRP_PCI_MEMORY_PHYS 0x00000000
-#define CHRP_PCI_MEMORY_BUS 0x00000000
-#define CHRP_PCI_MEMORY_SIZE 0x40000000
-#define PREP_REG_ADDR 0x80000cf8 /* MPC107 Config, Map A */
-#define PREP_REG_DATA 0x80000cfc /* MPC107 Config, Map A */
-#define PREP_ISA_IO_PHYS 0x80000000
-#define PREP_ISA_IO_BUS 0x00000000
-#define PREP_ISA_IO_SIZE 0x00800000
-#define PREP_PCI_IO_PHYS 0x81000000
-#define PREP_PCI_IO_BUS 0x01000000
-#define PREP_PCI_IO_SIZE 0x3e800000
-#define PREP_PCI_MEM_PHYS 0xc0000000
-#define PREP_PCI_MEM_BUS 0x00000000
-#define PREP_PCI_MEM_SIZE 0x3f000000
-#define PREP_PCI_MEMORY_PHYS 0x00000000
-#define PREP_PCI_MEMORY_BUS 0x80000000
-#define PREP_PCI_MEMORY_SIZE 0x80000000
-#define MPC107_PCI_CMD 0x80000004 /* MPC107 PCI cmd reg */
-#define MPC107_PCI_STAT 0x80000006 /* MPC107 PCI status reg */
-#define PROC_INT1_ADR 0x800000a8 /* MPC107 Processor i/f cfg1 */
-#define PROC_INT2_ADR 0x800000ac /* MPC107 Processor i/f cfg2 */
-#define MEM_CONT1_ADR 0x800000f0 /* MPC107 Memory control config. 1 */
-#define MEM_CONT2_ADR 0x800000f4 /* MPC107 Memory control config. 2 */
-#define MEM_CONT3_ADR 0x800000f8 /* MPC107 Memory control config. 3 */
-#define MEM_CONT4_ADR 0x800000fc /* MPC107 Memory control config. 4 */
-#define MEM_ERREN1_ADR 0x800000c0 /* MPC107 Memory error enable 1 */
-#define MEM_START1_ADR 0x80000080 /* MPC107 Memory starting addr */
-#define MEM_START2_ADR 0x80000084 /* MPC107 Memory starting addr-lo */
-#define XMEM_START1_ADR 0x80000088 /* MPC107 Extended mem. start addr-hi*/
-#define XMEM_START2_ADR 0x8000008c /* MPC107 Extended mem. start addr-lo*/
-#define MEM_END1_ADR 0x80000090 /* MPC107 Memory ending address */
-#define MEM_END2_ADR 0x80000094 /* MPC107 Memory ending addr-lo */
-#define XMEM_END1_ADR 0x80000098 /* MPC107 Extended mem. end addrs-hi */
-#define XMEM_END2_ADR 0x8000009c /* MPC107 Extended mem. end addrs-lo*/
-#define OUT_DRV_CONT 0x80000073 /* MPC107 Output Driver Control reg */
-#define MEM_EN_ADR 0x800000a0 /* Memory bank enable */
-#define PAGE_MODE 0x800000a3 /* MPC107 Page Mode Counter/Timer */
-
-/*-----------------------------------------------------------------------
- * Exception offsets (PowerPC standard)
- */
-#define EXC_OFF_RESERVED0 0x0000 /* Reserved */
-#define EXC_OFF_SYS_RESET 0x0100 /* System reset */
-#define EXC_OFF_MACH_CHCK 0x0200 /* Machine Check */
-#define EXC_OFF_DATA_STOR 0x0300 /* Data Storage */
-#define EXC_OFF_INS_STOR 0x0400 /* Instruction Storage */
-#define EXC_OFF_EXTERNAL 0x0500 /* External */
-#define EXC_OFF_ALIGN 0x0600 /* Alignment */
-#define EXC_OFF_PROGRAM 0x0700 /* Program */
-#define EXC_OFF_FPUNAVAIL 0x0800 /* Floating-point Unavailable */
-#define EXC_OFF_DECR 0x0900 /* Decrementer */
-#define EXC_OFF_RESERVED1 0x0A00 /* Reserved */
-#define EXC_OFF_RESERVED2 0x0B00 /* Reserved */
-#define EXC_OFF_SYS_CALL 0x0C00 /* System Call */
-#define EXC_OFF_TRACE 0x0D00 /* Trace */
-#define EXC_OFF_FPUNASSIST 0x0E00 /* Floating-point Assist */
-
- /* 0x0E10 - 0x0FFF are marked reserved in The PowerPC Architecture book */
- /* these found in DINK code - may not apply to 8240*/
-#define EXC_OFF_PMI 0x0F00 /* Performance Monitoring Interrupt */
-#define EXC_OFF_VMXUI 0x0F20 /* VMX (AltiVec) Unavailable Interrupt */
-
- /* 0x1000 - 0x2FFF are implementation specific */
- /* these found in DINK code - may not apply to 8240 */
-#define EXC_OFF_ITME 0x1000 /* Instruction Translation Miss Exception */
-#define EXC_OFF_DLTME 0x1100 /* Data Load Translation Miss Exception */
-#define EXC_OFF_DSTME 0x1200 /* Data Store Translation Miss Exception */
-#define EXC_OFF_IABE 0x1300 /* Instruction Addr Breakpoint Exception */
-#define EXC_OFF_SMIE 0x1400 /* System Management Interrupt Exception */
-#define EXC_OFF_JMDDI 0x1600 /* Java Mode denorm detect Interr -- WTF??*/
-#define EXC_OFF_RMTE 0x2000 /* Run Mode or Trace Exception */
-
-#define _START_OFFSET EXC_OFF_SYS_RESET
-
-#define MAP_A_CONFIG_ADDR_HIGH 0x8000 /* Upper half of CONFIG_ADDR for Map A */
-#define MAP_A_CONFIG_ADDR_LOW 0x0CF8 /* Lower half of CONFIG_ADDR for Map A */
-#define MAP_A_CONFIG_DATA_HIGH 0x8000 /* Upper half of CONFIG_DAT for Map A */
-#define MAP_A_CONFIG_DATA_LOW 0x0CFC /* Lower half of CONFIG_DAT for Map A */
-#define MAP_B_CONFIG_ADDR_HIGH 0xfec0 /* Upper half of CONFIG_ADDR for Map B */
-#define MAP_B_CONFIG_ADDR_LOW 0x0000 /* Lower half of CONFIG_ADDR for Map B */
-#define MAP_B_CONFIG_DATA_HIGH 0xfee0 /* Upper half of CONFIG_DAT for Map B */
-#define MAP_B_CONFIG_DATA_LOW 0x0000 /* Lower half of CONFIG_DAT for Map B */
-
-
-#if defined(CONFIG_SYS_ADDR_MAP_A)
-#define CONFIG_ADDR_HIGH MAP_A_CONFIG_ADDR_HIGH /* Upper half of CONFIG_ADDR */
-#define CONFIG_ADDR_LOW MAP_A_CONFIG_ADDR_LOW /* Lower half of CONFIG_ADDR */
-#define CONFIG_DATA_HIGH MAP_A_CONFIG_DATA_HIGH /* Upper half of CONFIG_DAT */
-#define CONFIG_DATA_LOW MAP_A_CONFIG_DATA_LOW /* Lower half of CONFIG_DAT */
-#else /* Assume Map B, default */
-#define CONFIG_ADDR_HIGH MAP_B_CONFIG_ADDR_HIGH /* Upper half of CONFIG_ADDR */
-#define CONFIG_ADDR_LOW MAP_B_CONFIG_ADDR_LOW /* Lower half of CONFIG_ADDR */
-#define CONFIG_DATA_HIGH MAP_B_CONFIG_DATA_HIGH /* Upper half of CONFIG_DAT */
-#define CONFIG_DATA_LOW MAP_B_CONFIG_DATA_LOW /* Lower half of CONFIG_DAT */
-#endif
-
-#define CONFIG_ADDR (CONFIG_ADDR_HIGH << 16 | CONFIG_ADDR_LOW)
-
-#define CONFIG_DATA (CONFIG_DATA_HIGH << 16 | CONFIG_DATA_LOW)
-
-/* Macros to write to config registers. addr should be a constant in all cases */
-
-#define CONFIG_WRITE_BYTE( addr, data ) \
- __asm__ __volatile__( \
- " stwbrx %1, 0, %0\n \
- sync\n \
- stb %3, %4(%2)\n \
- sync " \
- : /* no output */ \
- : "r" (CONFIG_ADDR), "r" ((addr) & ~3), \
- "b" (CONFIG_DATA), "r" (data), \
- "n" ((addr) & 3));
-
-#define CONFIG_WRITE_HALFWORD( addr, data ) \
- __asm__ __volatile__( \
- " stwbrx %1, 0, %0\n \
- sync\n \
- sthbrx %3, %4, %2\n \
- sync " \
- : /* no output */ \
- : "r" (CONFIG_ADDR), "r" ((addr) & ~3), \
- "r" (CONFIG_DATA), "r" (data), \
- "b" ((addr) & 3));
-
-/* this assumes it's writeing on word boundaries*/
-#define CONFIG_WRITE_WORD( addr, data ) \
- __asm__ __volatile__( \
- " stwbrx %1, 0, %0\n \
- sync\n \
- stwbrx %3, 0, %2\n \
- sync " \
- : /* no output */ \
- : "r" (CONFIG_ADDR), "r" (addr), \
- "r" (CONFIG_DATA), "r" (data));
-
-/* Configuration register reads*/
-
-#define CONFIG_READ_BYTE( addr, reg ) \
- __asm__ ( \
- " stwbrx %1, 0, %2\n \
- sync\n \
- lbz %0, %4(%3)\n \
- sync " \
- : "=r" (reg) \
- : "r" ((addr) & ~3), "r" (CONFIG_ADDR), \
- "b" (CONFIG_DATA), "n" ((addr) & 3));
-
-
-#define CONFIG_READ_HALFWORD( addr, reg ) \
- __asm__ ( \
- " stwbrx %1, 0, %2\n \
- sync\n \
- lhbrx %0, %4, %3\n \
- sync " \
- : "=r" (reg) \
- : "r" ((addr) & ~3), "r" (CONFIG_ADDR), \
- "r" (CONFIG_DATA), \
- "b" ((addr) & 3));
-
-/* this assumes it's reading on word boundaries*/
-#define CONFIG_READ_WORD( addr, reg ) \
- __asm__ ( \
- " stwbrx %1, 0, %2\n \
- sync\n \
- lwbrx %0, 0, %3\n \
- sync " \
- : "=r" (reg) \
- : "r" (addr), "r" (CONFIG_ADDR),\
- "r" (CONFIG_DATA));
-
-/*
- * configuration register 'addresses'.
- * These are described in chaper 5 of the 8240 users manual.
- * Where the register has an abreviation in the manual, this has
- * been usaed here, otherwise a name in keeping with the norm has
- * been invented.
- * Note that some of these registers aren't documented in the manual.
- */
-
-#define PCICR 0x80000004 /* PCI Command Register */
-#define PCISR 0x80000006 /* PCI Status Register */
-#define REVID 0x80000008 /* CPU revision id */
-#define PIR 0x80000009 /* PCI Programming Interface Register */
-#define PBCCR 0x8000000b /* PCI Base Class Code Register */
-#define PCLSR 0x8000000c /* Processor Cache Line Size Register */
-#define PLTR 0x8000000d /* PCI Latancy Timer Register */
-#define PHTR 0x8000000e /* PCI Header Type Register */
-#define BISTCTRL 0x8000000f /* BIST Control */
-#define LMBAR 0x80000010 /* Local Base Address Register */
-#define PCSRBAR 0x80000014 /* PCSR Base Address Register */
-#define ILR 0x8000003c /* PCI Interrupt Line Register */
-#define IPR 0x8000003d /* Interrupt Pin Register */
-#define MINGNT 0x8000003e /* MIN GNI */
-#define MAXLAT 0x8000003f /* MAX LAT */
-#define PCIACR 0x80000046 /* PCI Arbiter Control Register */
-#define PMCR1 0x80000070 /* Power management config. 1 */
-#define PMCR2 0x80000072 /* Power management config. 2 */
-#define ODCR 0x80000073 /* Output Driver Control Register */
-#define CLKDCR 0x80000074 /* CLK Driver Control Register */
-#if defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241)
-#define MIOCR1 0x80000076 /* Miscellaneous I/O Control Register 1 */
-#define MIOCR2 0x80000077 /* Miscellaneous I/O Control Register 2 */
-#endif
-#define EUMBBAR 0x80000078 /* Embedded Utilities Memory Block Base Address Register */
-#define EUMBBAR_VAL 0x80500000 /* PCI Relocation offset for EUMB region */
-#define EUMBSIZE 0x00100000 /* Size of EUMB region */
-
-#define MSAR1 0x80000080 /* Memory Starting Address Register 1 */
-#define MSAR2 0x80000084 /* Memory Starting Address Register 2 */
-#define EMSAR1 0x80000088 /* Extended Memory Starting Address Register 1*/
-#define EMSAR2 0x8000008c /* Extended Memory Starting Address Register 2*/
-#define MEAR1 0x80000090 /* Memory Ending Address Register 1 */
-#define MEAR2 0x80000094 /* Memory Ending Address Register 2 */
-#define EMEAR1 0x80000098 /* Extended Memory Ending Address Register 1 */
-#define EMEAR2 0x8000009c /* Extended Memory Ending Address Register 2 */
-#define MBER 0x800000a0 /* Memory bank Enable Register*/
-#define MPMR 0x800000a3 /* Memory Page Mode Register (stores PGMAX) */
-#define PICR1 0x800000a8 /* Processor Interface Configuration Register 1 */
-#define PICR2 0x800000ac /* Processor Interface Configuration Register 2 */
-#define ECCSBECR 0x800000b8 /* ECC Single-Bit Error Counter Register */
-#define ECCSBETR 0x800000b8 /* ECC Single-Bit Error Trigger Register */
-#define ERRENR1 0x800000c0 /* Error Enableing Register 1 */
-#define ERRENR2 0x800000c4 /* Error Enableing Register 2 */
-#define ERRDR1 0x800000c1 /* Error Detection Register 1 */
-#define IPBESR 0x800000c3 /* Internal Processor Error Status Register */
-#define ERRDR2 0x800000c5 /* Error Detection Register 2 */
-#define PBESR 0x800000c7 /* PCI Bus Error Status Register */
-#define PBEAR 0x800000c8 /* Processor/PCI Bus Error Status Register */
-#define AMBOR 0x800000e0 /* Address Map B Options Register */
-#define PCMBCR 0x800000e1 /* PCI/Memory Buffer Configuration */
-#define MCCR1 0x800000f0 /* Memory Control Configuration Register 1 */
-#define MCCR2 0x800000f4 /* Memory Control Configuration Register 2 */
-#define MCCR3 0x800000f8 /* Memory Control Configuration Register 3 */
-#define MCCR4 0x800000fc /* Memory Control Configuration Register 4 */
-
-/* some values for some of the above */
-
-#define PICR1_CF_APARK 0x00000008
-#define PICR1_LE_MODE 0x00000020
-#define PICR1_ST_GATH_EN 0x00000040
-#if defined(CONFIG_MPC8240)
-#define PICR1_EN_PCS 0x00000080 /* according to dink code, sets the 8240 to handle pci config space */
-#elif defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241)
-#define PICR1_NO_BUSW_CK 0x00000080 /* no bus width check for flash writes */
-#define PICR1_DEC 0x00000100 /* Time Base enable on 8245/8241 */
-#define ERCR1 0x800000d0 /* Extended ROM Configuration Register 1 */
-#define ERCR2 0x800000d4 /* Extended ROM Configuration Register 2 */
-#define ERCR3 0x800000d8 /* Extended ROM Configuration Register 3 */
-#define ERCR4 0x800000dc /* Extended ROM Configuration Register 4 */
-#define MIOCR1 0x80000076 /* Miscellaneous I/O Control Register 1 */
-#define MIOCR1_ADR_X 0x80000074 /* Miscellaneous I/O Control Register 1 */
-#define MIOCR1_SHIFT 2
-#define MIOCR2 0x80000077 /* Miscellaneous I/O Control Register 2 */
-#define MIOCR2_ADR_X 0x80000074 /* Miscellaneous I/O Control Register 1 */
-#define MIOCR2_SHIFT 3
-#define ODCR_ADR_X 0x80000070 /* Output Driver Control register */
-#define ODCR_SHIFT 3
-#define PMCR2_ADR 0x80000072 /* Power Mgmnt Cfg 2 register */
-#define PMCR2_ADR_X 0x80000070
-#define PMCR2_SHIFT 3
-#define PMCR1_ADR 0x80000070 /* Power Mgmnt Cfg 1 reister */
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-#define PICR1_CF_DPARK 0x00000200
-#define PICR1_MCP_EN 0x00000800
-#define PICR1_FLASH_WR_EN 0x00001000
-#ifdef CONFIG_MPC8240
-#define PICR1_ADDRESS_MAP 0x00010000
-#define PIRC1_MSK 0xff000000
-#endif
-#define PICR1_PROC_TYPE_MSK 0x00060000
-#define PICR1_PROC_TYPE_603E 0x00040000
-#define PICR1_RCS0 0x00100000
-
-#define PICR2_CF_SNOOP_WS_MASK 0x000c0000
-#define PICR2_CF_SNOOP_WS_0WS 0x00000000
-#define PICR2_CF_SNOOP_WS_1WS 0x00040000
-#define PICR2_CF_SNOOP_WS_2WS 0x00080000
-#define PICR2_CF_SNOOP_WS_3WS 0x000c0000
-#define PICR2_CF_APHASE_WS_MASK 0x0000000c
-#define PICR2_CF_APHASE_WS_0WS 0x00000000
-#define PICR2_CF_APHASE_WS_1WS 0x00000004
-#define PICR2_CF_APHASE_WS_2WS 0x00000008
-#define PICR2_CF_APHASE_WS_3WS 0x0000000c
-
-#define MCCR1_ROMNAL_SHIFT 28
-#define MCCR1_ROMNAL_MSK 0xf0000000
-#define MCCR1_ROMFAL_SHIFT 23
-#define MCCR1_ROMFAL_MSK 0x0f800000
-#define MCCR1_DBUS_SIZE0 0x00400000
-#define MCCR1_BURST 0x00100000
-#define MCCR1_MEMGO 0x00080000
-#define MCCR1_SREN 0x00040000
-#if defined(CONFIG_MPC8240)
-#define MCCR1_RAM_TYPE 0x00020000
-#elif defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241)
-#define MCCR1_SDRAM_EN 0x00020000
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-#define MCCR1_PCKEN 0x00010000
-#define MCCR1_BANK1ROW_SHIFT 2
-#define MCCR1_BANK2ROW_SHIFT 4
-#define MCCR1_BANK3ROW_SHIFT 6
-#define MCCR1_BANK4ROW_SHIFT 8
-#define MCCR1_BANK5ROW_SHIFT 10
-#define MCCR1_BANK6ROW_SHIFT 12
-#define MCCR1_BANK7ROW_SHIFT 14
-
-#define MCCR2_TS_WAIT_TIMER_MSK 0xe0000000
-#define MCCR2_TS_WAIT_TIMER_SHIFT 29
-#define MCCR2_ASRISE_MSK 0x1e000000
-#define MCCR2_ASRISE_SHIFT 25
-#define MCCR2_ASFALL_MSK 0x01e00000
-#define MCCR2_ASFALL_SHIFT 21
-
-#define MCCR2_INLINE_PAR_NOT_ECC 0x00100000
-#define MCCR2_WRITE_PARITY_CHK 0x00080000
-#define MCCR2_INLFRD_PARECC_CHK_EN 0x00040000
-#ifdef CONFIG_MPC8240
-#define MCCR2_ECC_EN 0x00020000
-#define MCCR2_EDO 0x00010000
-#endif
-#define MCCR2_REFINT_MSK 0x0000fffc
-#define MCCR2_REFINT_SHIFT 2
-#define MCCR2_RSV_PG 0x00000002
-#define MCCR2_PMW_PAR 0x00000001
-
-#define MCCR3_BSTOPRE2TO5_MSK 0xf0000000 /*BSTOPRE[2-5]*/
-#define MCCR3_BSTOPRE2TO5_SHIFT 28
-#define MCCR3_REFREC_MSK 0x0f000000
-#define MCCR3_REFREC_SHIFT 24
-#ifdef CONFIG_MPC8240
-#define MCCR3_RDLAT_MSK 0x00f00000
-#define MCCR3_RDLAT_SHIFT 20
-#define MCCR3_CPX 0x00010000
-#define MCCR3_RAS6P_MSK 0x00078000
-#define MCCR3_RAS6P_SHIFT 15
-#define MCCR3_CAS5_MSK 0x00007000
-#define MCCR3_CAS5_SHIFT 12
-#define MCCR3_CP4_MSK 0x00000e00
-#define MCCR3_CP4_SHIFT 9
-#define MCCR3_CAS3_MSK 0x000001c0
-#define MCCR3_CAS3_SHIFT 6
-#define MCCR3_RCD2_MSK 0x00000038
-#define MCCR3_RCD2_SHIFT 3
-#define MCCR3_RP1_MSK 0x00000007
-#define MCCR3_RP1_SHIFT 0
-#endif
-
-#define MCCR4_PRETOACT_MSK 0xf0000000
-#define MCCR4_PRETOACT_SHIFT 28
-#define MCCR4_ACTTOPRE_MSK 0x0f000000
-#define MCCR4_ACTTOPRE_SHIFT 24
-#define MCCR4_WMODE 0x00800000
-#define MCCR4_INLINE 0x00400000
-#if defined(CONFIG_MPC8240)
-#define MCCR4_BIT21 0x00200000 /* this include cos DINK code sets it- unknown function*/
-#elif defined(CONFIG_MPC8245) || defined(CONFIG_MPC8241)
-#define MCCR4_EXTROM 0x00200000 /* enables Extended ROM space */
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-#define MCCR4_REGISTERED 0x00100000
-#define MCCR4_BSTOPRE0TO1_MSK 0x000c0000 /*BSTOPRE[0-1]*/
-#define MCCR4_BSTOPRE0TO1_SHIFT 18
-#define MCCR4_REGDIMM 0x00008000
-#define MCCR4_SDMODE_MSK 0x00007f00
-#define MCCR4_SDMODE_SHIFT 8
-#define MCCR4_ACTTORW_MSK 0x000000f0
-#define MCCR4_ACTTORW_SHIFT 4
-#define MCCR4_BSTOPRE6TO9_MSK 0x0000000f /*BSTOPRE[6-9]*/
-#define MCCR4_BSTOPRE6TO9_SHIFT 0
-#define MCCR4_DBUS_SIZE2_SHIFT 17
-
-#define MICR_ADDR_MASK 0x0ff00000
-#define MICR_ADDR_SHIFT 20
-#define MICR_EADDR_MASK 0x30000000
-#define MICR_EADDR_SHIFT 28
-
-/*eumb and epic config*/
-
-#define EPIC_FPR 0x00041000
-#define EPIC_GCR 0x00041020
-#define EPIC_EICR 0x00041030
-#define EPIC_EVI 0x00041080
-#define EPIC_PI 0x00041090
-#define EPIC_SVR 0x000410E0
-#define EPIC_TFRR 0x000410F0
-
-/*
- * Note the information for these is rather mangled in the 8240 manual.
- * These are guesses.
- */
-
-#define EPIC_GTCCR0 0x00041100
-#define EPIC_GTCCR1 0x00041140
-#define EPIC_GTCCR2 0x00041180
-#define EPIC_GTCCR3 0x000411C0
-#define EPIC_GTBCR0 0x00041110
-#define EPIC_GTBCR1 0x00041150
-#define EPIC_GTBCR2 0x00041190
-#define EPIC_GTBCR3 0x000411D0
-#define EPIC_GTVPR0 0x00041120
-#define EPIC_GTVPR1 0x00041160
-#define EPIC_GTVPR2 0x000411a0
-#define EPIC_GTVPR3 0x000411e0
-#define EPIC_GTDR0 0x00041130
-#define EPIC_GTDR1 0x00041170
-#define EPIC_GTDR2 0x000411b0
-#define EPIC_GTDR3 0x000411f0
-
-#define EPIC_IVPR0 0x00050200
-#define EPIC_IVPR1 0x00050220
-#define EPIC_IVPR2 0x00050240
-#define EPIC_IVPR3 0x00050260
-#define EPIC_IVPR4 0x00050280
-
-#define EPIC_SVPR0 0x00050200
-#define EPIC_SVPR1 0x00050220
-#define EPIC_SVPR2 0x00050240
-#define EPIC_SVPR3 0x00050260
-#define EPIC_SVPR4 0x00050280
-#define EPIC_SVPR5 0x000502A0
-#define EPIC_SVPR6 0x000502C0
-#define EPIC_SVPR7 0x000502E0
-#define EPIC_SVPR8 0x00050300
-#define EPIC_SVPR9 0x00050320
-#define EPIC_SVPRa 0x00050340
-#define EPIC_SVPRb 0x00050360
-#define EPIC_SVPRc 0x00050380
-#define EPIC_SVPRd 0x000503A0
-#define EPIC_SVPRe 0x000503C0
-#define EPIC_SVPRf 0x000503E0
-
-/* MPC8240 Byte Swap/PCI Support Macros */
-#define BYTE_SWAP_16_BIT(x) ( (((x) & 0x00ff) << 8) | ( (x) >> 8) )
-#define LONGSWAP(x) ((((x) & 0x000000ff) << 24) | (((x) & 0x0000ff00) << 8)|\
- (((x) & 0x00ff0000) >> 8) | (((x) & 0xff000000) >> 24) )
-#define PCISWAP(x) LONGSWAP(x)
-
-#ifndef __ASSEMBLY__
-
-/*
- * MPC107 Support
- *
- */
-unsigned int mpc824x_mpc107_getreg(unsigned int regNum);
-void mpc824x_mpc107_setreg(unsigned int regNum, unsigned int regVal);
-void mpc824x_mpc107_write8(unsigned int address, unsigned char data);
-void mpc824x_mpc107_write16(unsigned int address, unsigned short data);
-void mpc824x_mpc107_write32(unsigned int address, unsigned int data);
-unsigned char mpc824x_mpc107_read8(unsigned int address);
-unsigned short mpc824x_mpc107_read16(unsigned int address);
-unsigned int mpc824x_mpc107_read32(unsigned int address);
-unsigned int mpc824x_eummbar_read(unsigned int regNum);
-void mpc824x_eummbar_write(unsigned int regNum, unsigned int regVal);
-
-#ifdef CONFIG_PCI
-struct pci_controller;
-void pci_cpm824x_init(struct pci_controller* hose);
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __MPC824X_H__ */
diff --git a/include/pci.h b/include/pci.h
index 216f448..7f67ca6 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -670,10 +670,6 @@ extern void board_pci_fixup_dev(struct pci_controller *hose, pci_dev_t dev,
const char * pci_class_str(u8 class);
int pci_last_busno(void);
-#ifdef CONFIG_MPC824X
-extern void pci_mpc824x_init (struct pci_controller *hose);
-#endif
-
#ifdef CONFIG_MPC85xx
extern void pci_mpc85xx_init (struct pci_controller *hose);
#endif
diff --git a/include/pcmcia/cirrus.h b/include/pcmcia/cirrus.h
deleted file mode 100644
index cd34dd8..0000000
--- a/include/pcmcia/cirrus.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * cirrus.h 1.4 1999/10/25 20:03:34
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in which
- * case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_CIRRUS_H
-#define _LINUX_CIRRUS_H
-
-#ifndef PCI_VENDOR_ID_CIRRUS
-#define PCI_VENDOR_ID_CIRRUS 0x1013
-#endif
-#ifndef PCI_DEVICE_ID_CIRRUS_6729
-#define PCI_DEVICE_ID_CIRRUS_6729 0x1100
-#endif
-#ifndef PCI_DEVICE_ID_CIRRUS_6832
-#define PCI_DEVICE_ID_CIRRUS_6832 0x1110
-#endif
-
-#define PD67_MISC_CTL_1 0x16 /* Misc control 1 */
-#define PD67_FIFO_CTL 0x17 /* FIFO control */
-#define PD67_MISC_CTL_2 0x1E /* Misc control 2 */
-#define PD67_CHIP_INFO 0x1f /* Chip information */
-#define PD67_ATA_CTL 0x026 /* 6730: ATA control */
-#define PD67_EXT_INDEX 0x2e /* Extension index */
-#define PD67_EXT_DATA 0x2f /* Extension data */
-
-/* PD6722 extension registers -- indexed in PD67_EXT_INDEX */
-#define PD67_DATA_MASK0 0x01 /* Data mask 0 */
-#define PD67_DATA_MASK1 0x02 /* Data mask 1 */
-#define PD67_DMA_CTL 0x03 /* DMA control */
-
-/* PD6730 extension registers -- indexed in PD67_EXT_INDEX */
-#define PD67_EXT_CTL_1 0x03 /* Extension control 1 */
-#define PD67_MEM_PAGE(n) ((n)+5) /* PCI window bits 31:24 */
-#define PD67_EXTERN_DATA 0x0a
-#define PD67_MISC_CTL_3 0x25
-#define PD67_SMB_PWR_CTL 0x26
-
-/* I/O window address offset */
-#define PD67_IO_OFF(w) (0x36+((w)<<1))
-
-/* Timing register sets */
-#define PD67_TIME_SETUP(n) (0x3a + 3*(n))
-#define PD67_TIME_CMD(n) (0x3b + 3*(n))
-#define PD67_TIME_RECOV(n) (0x3c + 3*(n))
-
-/* Flags for PD67_MISC_CTL_1 */
-#define PD67_MC1_5V_DET 0x01 /* 5v detect */
-#define PD67_MC1_MEDIA_ENA 0x01 /* 6730: Multimedia enable */
-#define PD67_MC1_VCC_3V 0x02 /* 3.3v Vcc */
-#define PD67_MC1_PULSE_MGMT 0x04
-#define PD67_MC1_PULSE_IRQ 0x08
-#define PD67_MC1_SPKR_ENA 0x10
-#define PD67_MC1_INPACK_ENA 0x80
-
-/* Flags for PD67_FIFO_CTL */
-#define PD67_FIFO_EMPTY 0x80
-
-/* Flags for PD67_MISC_CTL_2 */
-#define PD67_MC2_FREQ_BYPASS 0x01
-#define PD67_MC2_DYNAMIC_MODE 0x02
-#define PD67_MC2_SUSPEND 0x04
-#define PD67_MC2_5V_CORE 0x08
-#define PD67_MC2_LED_ENA 0x10 /* IRQ 12 is LED enable */
-#define PD67_MC2_FAST_PCI 0x10 /* 6729: PCI bus > 25 MHz */
-#define PD67_MC2_3STATE_BIT7 0x20 /* Floppy change bit */
-#define PD67_MC2_DMA_MODE 0x40
-#define PD67_MC2_IRQ15_RI 0x80 /* IRQ 15 is ring enable */
-
-/* Flags for PD67_CHIP_INFO */
-#define PD67_INFO_SLOTS 0x20 /* 0 = 1 slot, 1 = 2 slots */
-#define PD67_INFO_CHIP_ID 0xc0
-#define PD67_INFO_REV 0x1c
-
-/* Fields in PD67_TIME_* registers */
-#define PD67_TIME_SCALE 0xc0
-#define PD67_TIME_SCALE_1 0x00
-#define PD67_TIME_SCALE_16 0x40
-#define PD67_TIME_SCALE_256 0x80
-#define PD67_TIME_SCALE_4096 0xc0
-#define PD67_TIME_MULT 0x3f
-
-/* Fields in PD67_DMA_CTL */
-#define PD67_DMA_MODE 0xc0
-#define PD67_DMA_OFF 0x00
-#define PD67_DMA_DREQ_INPACK 0x40
-#define PD67_DMA_DREQ_WP 0x80
-#define PD67_DMA_DREQ_BVD2 0xc0
-#define PD67_DMA_PULLUP 0x20 /* Disable socket pullups? */
-
-/* Fields in PD67_EXT_CTL_1 */
-#define PD67_EC1_VCC_PWR_LOCK 0x01
-#define PD67_EC1_AUTO_PWR_CLEAR 0x02
-#define PD67_EC1_LED_ENA 0x04
-#define PD67_EC1_INV_CARD_IRQ 0x08
-#define PD67_EC1_INV_MGMT_IRQ 0x10
-#define PD67_EC1_PULLUP_CTL 0x20
-
-/* Fields in PD67_MISC_CTL_3 */
-#define PD67_MC3_IRQ_MASK 0x03
-#define PD67_MC3_IRQ_PCPCI 0x00
-#define PD67_MC3_IRQ_EXTERN 0x01
-#define PD67_MC3_IRQ_PCIWAY 0x02
-#define PD67_MC3_IRQ_PCI 0x03
-#define PD67_MC3_PWR_MASK 0x0c
-#define PD67_MC3_PWR_SERIAL 0x00
-#define PD67_MC3_PWR_TI2202 0x08
-#define PD67_MC3_PWR_SMB 0x0c
-
-/* Register definitions for Cirrus PD6832 PCI-to-CardBus bridge */
-
-/* PD6832 extension registers -- indexed in PD67_EXT_INDEX */
-#define PD68_EXT_CTL_2 0x0b
-#define PD68_PCI_SPACE 0x22
-#define PD68_PCCARD_SPACE 0x23
-#define PD68_WINDOW_TYPE 0x24
-#define PD68_EXT_CSC 0x2e
-#define PD68_MISC_CTL_4 0x2f
-#define PD68_MISC_CTL_5 0x30
-#define PD68_MISC_CTL_6 0x31
-
-/* Extra flags in PD67_MISC_CTL_3 */
-#define PD68_MC3_HW_SUSP 0x10
-#define PD68_MC3_MM_EXPAND 0x40
-#define PD68_MC3_MM_ARM 0x80
-
-/* Bridge Control Register */
-#define PD6832_BCR_MGMT_IRQ_ENA 0x0800
-
-/* Socket Number Register */
-#define PD6832_SOCKET_NUMBER 0x004c /* 8 bit */
-
-
-typedef struct cirrus_state_t {
- u_char misc1, misc2;
- u_char timer[6];
-} cirrus_state_t;
-
-/* Cirrus options */
-static int has_dma = -1;
-static int has_led = -1;
-static int has_ring = -1;
-static int dynamic_mode = 0;
-static int freq_bypass = -1;
-#ifdef CONFIG_CPC45
-static int setup_time = 2;
-static int cmd_time = 6;
-static int recov_time = 1;
-#else
-static int setup_time = -1;
-static int cmd_time = -1;
-static int recov_time = -1;
-#endif
-
-
-#endif /* _LINUX_CIRRUS_H */
diff --git a/include/pcmcia/i82365.h b/include/pcmcia/i82365.h
deleted file mode 100644
index 0b432a8..0000000
--- a/include/pcmcia/i82365.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * i82365.h 1.21 2001/08/24 12:15:33
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_I82365_H
-#define _LINUX_I82365_H
-
-/* register definitions for the Intel 82365SL PCMCIA controller */
-
-/* Offsets for PCIC registers */
-#define I365_IDENT 0x00 /* Identification and revision */
-#define I365_STATUS 0x01 /* Interface status */
-#define I365_POWER 0x02 /* Power and RESETDRV control */
-#define I365_INTCTL 0x03 /* Interrupt and general control */
-#define I365_CSC 0x04 /* Card status change */
-#define I365_CSCINT 0x05 /* Card status change interrupt control */
-#define I365_ADDRWIN 0x06 /* Address window enable */
-#define I365_IOCTL 0x07 /* I/O control */
-#define I365_GENCTL 0x16 /* Card detect and general control */
-#define I365_GBLCTL 0x1E /* Global control register */
-
-/* Offsets for I/O and memory window registers */
-#define I365_IO(map) (0x08+((map)<<2))
-#define I365_MEM(map) (0x10+((map)<<3))
-#define I365_W_START 0
-#define I365_W_STOP 2
-#define I365_W_OFF 4
-
-/* Flags for I365_STATUS */
-#define I365_CS_BVD1 0x01
-#define I365_CS_STSCHG 0x01
-#define I365_CS_BVD2 0x02
-#define I365_CS_SPKR 0x02
-#define I365_CS_DETECT 0x0C
-#define I365_CS_WRPROT 0x10
-#define I365_CS_READY 0x20 /* Inverted */
-#define I365_CS_POWERON 0x40
-#define I365_CS_GPI 0x80
-
-/* Flags for I365_POWER */
-#define I365_PWR_OFF 0x00 /* Turn off the socket */
-#define I365_PWR_OUT 0x80 /* Output enable */
-#define I365_PWR_NORESET 0x40 /* Disable RESETDRV on resume */
-#define I365_PWR_AUTO 0x20 /* Auto pwr switch enable */
-#define I365_VCC_MASK 0x18 /* Mask for turning off Vcc */
-/* There are different layouts for B-step and DF-step chips: the B
- step has independent Vpp1/Vpp2 control, and the DF step has only
- Vpp1 control, plus 3V control */
-#define I365_VCC_5V 0x10 /* Vcc = 5.0v */
-#define I365_VCC_3V 0x18 /* Vcc = 3.3v */
-#define I365_VPP2_MASK 0x0c /* Mask for turning off Vpp2 */
-#define I365_VPP2_5V 0x04 /* Vpp2 = 5.0v */
-#define I365_VPP2_12V 0x08 /* Vpp2 = 12.0v */
-#define I365_VPP1_MASK 0x03 /* Mask for turning off Vpp1 */
-#define I365_VPP1_5V 0x01 /* Vpp2 = 5.0v */
-#define I365_VPP1_12V 0x02 /* Vpp2 = 12.0v */
-
-/* Flags for I365_INTCTL */
-#define I365_RING_ENA 0x80
-#define I365_PC_RESET 0x40
-#define I365_PC_IOCARD 0x20
-#define I365_INTR_ENA 0x10
-#define I365_IRQ_MASK 0x0F
-
-/* Flags for I365_CSC and I365_CSCINT*/
-#define I365_CSC_BVD1 0x01
-#define I365_CSC_STSCHG 0x01
-#define I365_CSC_BVD2 0x02
-#define I365_CSC_READY 0x04
-#define I365_CSC_DETECT 0x08
-#define I365_CSC_ANY 0x0F
-#define I365_CSC_GPI 0x10
-
-/* Flags for I365_ADDRWIN */
-#define I365_ADDR_MEMCS16 0x20
-#define I365_ENA_IO(map) (0x40 << (map))
-#define I365_ENA_MEM(map) (0x01 << (map))
-
-/* Flags for I365_IOCTL */
-#define I365_IOCTL_MASK(map) (0x0F << (map<<2))
-#define I365_IOCTL_WAIT(map) (0x08 << (map<<2))
-#define I365_IOCTL_0WS(map) (0x04 << (map<<2))
-#define I365_IOCTL_IOCS16(map) (0x02 << (map<<2))
-#define I365_IOCTL_16BIT(map) (0x01 << (map<<2))
-
-/* Flags for I365_GENCTL */
-#define I365_CTL_16DELAY 0x01
-#define I365_CTL_RESET 0x02
-#define I365_CTL_GPI_ENA 0x04
-#define I365_CTL_GPI_CTL 0x08
-#define I365_CTL_RESUME 0x10
-#define I365_CTL_SW_IRQ 0x20
-
-/* Flags for I365_GBLCTL */
-#define I365_GBL_PWRDOWN 0x01
-#define I365_GBL_CSC_LEV 0x02
-#define I365_GBL_WRBACK 0x04
-#define I365_GBL_IRQ_0_LEV 0x08
-#define I365_GBL_IRQ_1_LEV 0x10
-
-/* Flags for memory window registers */
-#define I365_MEM_16BIT 0x8000 /* In memory start high byte */
-#define I365_MEM_0WS 0x4000
-#define I365_MEM_WS1 0x8000 /* In memory stop high byte */
-#define I365_MEM_WS0 0x4000
-#define I365_MEM_WRPROT 0x8000 /* In offset high byte */
-#define I365_MEM_REG 0x4000
-
-#define I365_REG(slot, reg) (((slot) << 6) | (reg))
-
-/* Default ISA interrupt mask */
-#define I365_ISA_IRQ_MASK 0xdeb8 /* irq's 3-5,7,9-12,14,15 */
-
-/* Device ID's for PCI-to-PCMCIA bridges */
-
-#ifndef PCI_VENDOR_ID_INTEL
-#define PCI_VENDOR_ID_INTEL 0x8086
-#endif
-#ifndef PCI_DEVICE_ID_INTEL_82092AA_0
-#define PCI_DEVICE_ID_INTEL_82092AA_0 0x1221
-#endif
-#ifndef PCI_VENDOR_ID_OMEGA
-#define PCI_VENDOR_ID_OMEGA 0x119b
-#endif
-#ifndef PCI_DEVICE_ID_OMEGA_82C092G
-#define PCI_DEVICE_ID_OMEGA_82C092G 0x1221
-#endif
-
-#endif /* _LINUX_I82365_H */
diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h
deleted file mode 100644
index aafae8a..0000000
--- a/include/pcmcia/ss.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * ss.h 1.31 2001/08/24 12:16:13
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_SS_H
-#define _LINUX_SS_H
-
-/* For RegisterCallback */
-typedef struct ss_callback_t {
- void (*handler)(void *info, u_int events);
- void *info;
-} ss_callback_t;
-
-/* Definitions for card status flags for GetStatus */
-#define SS_WRPROT 0x0001
-#define SS_CARDLOCK 0x0002
-#define SS_EJECTION 0x0004
-#define SS_INSERTION 0x0008
-#define SS_BATDEAD 0x0010
-#define SS_BATWARN 0x0020
-#define SS_READY 0x0040
-#define SS_DETECT 0x0080
-#define SS_POWERON 0x0100
-#define SS_GPI 0x0200
-#define SS_STSCHG 0x0400
-#define SS_CARDBUS 0x0800
-#define SS_3VCARD 0x1000
-#define SS_XVCARD 0x2000
-#define SS_PENDING 0x4000
-
-/* for InquireSocket */
-typedef struct socket_cap_t {
- u_int features;
- u_int irq_mask;
- u_int map_size;
- u_char pci_irq;
- u_char cardbus;
- struct pci_bus *cb_bus;
- struct bus_operations *bus;
-} socket_cap_t;
-
-/* InquireSocket capabilities */
-#define SS_CAP_PAGE_REGS 0x0001
-#define SS_CAP_VIRTUAL_BUS 0x0002
-#define SS_CAP_MEM_ALIGN 0x0004
-#define SS_CAP_STATIC_MAP 0x0008
-#define SS_CAP_PCCARD 0x4000
-#define SS_CAP_CARDBUS 0x8000
-
-/* for GetSocket, SetSocket */
-typedef struct socket_state_t {
- u_int flags;
- u_int csc_mask;
- u_char Vcc, Vpp;
- u_char io_irq;
-} socket_state_t;
-
-/* Socket configuration flags */
-#define SS_PWR_AUTO 0x0010
-#define SS_IOCARD 0x0020
-#define SS_RESET 0x0040
-#define SS_DMA_MODE 0x0080
-#define SS_SPKR_ENA 0x0100
-#define SS_OUTPUT_ENA 0x0200
-#define SS_ZVCARD 0x0400
-
-/* Flags for I/O port and memory windows */
-#define MAP_ACTIVE 0x01
-#define MAP_16BIT 0x02
-#define MAP_AUTOSZ 0x04
-#define MAP_0WS 0x08
-#define MAP_WRPROT 0x10
-#define MAP_ATTRIB 0x20
-#define MAP_USE_WAIT 0x40
-#define MAP_PREFETCH 0x80
-
-/* Use this just for bridge windows */
-#define MAP_IOSPACE 0x20
-
-typedef struct pccard_io_map {
- u_char map;
- u_char flags;
- u_short speed;
- u_short start, stop;
-} pccard_io_map;
-
-typedef struct pccard_mem_map {
- u_char map;
- u_char flags;
- u_short speed;
- u_long sys_start, sys_stop;
- u_int card_start;
-} pccard_mem_map;
-
-typedef struct cb_bridge_map {
- u_char map;
- u_char flags;
- u_int start, stop;
-} cb_bridge_map;
-
-enum ss_service {
- SS_RegisterCallback, SS_InquireSocket,
- SS_GetStatus, SS_GetSocket, SS_SetSocket,
- SS_GetIOMap, SS_SetIOMap, SS_GetMemMap, SS_SetMemMap,
- SS_GetBridge, SS_SetBridge, SS_ProcSetup
-};
-
-#endif /* _LINUX_SS_H */
diff --git a/include/pcmcia/ti113x.h b/include/pcmcia/ti113x.h
deleted file mode 100644
index 5453588..0000000
--- a/include/pcmcia/ti113x.h
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * ti113x.h 1.31 2002/05/12 18:19:47
- *
- * The contents of this file are subject to the Mozilla Public License
- * Version 1.1 (the "License"); you may not use this file except in
- * compliance with the License. You may obtain a copy of the License
- * at http://www.mozilla.org/MPL/
- *
- * Software distributed under the License is distributed on an "AS IS"
- * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- * the License for the specific language governing rights and
- * limitations under the License.
- *
- * The initial developer of the original code is David A. Hinds
- * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
- *
- * Alternatively, the contents of this file may be used under the
- * terms of the GNU General Public License version 2 (the "GPL"), in
- * which case the provisions of the GPL are applicable instead of the
- * above. If you wish to allow the use of your version of this file
- * only under the terms of the GPL and not to allow others to use
- * your version of this file under the MPL, indicate your decision by
- * deleting the provisions above and replace them with the notice and
- * other provisions required by the GPL. If you do not delete the
- * provisions above, a recipient may use your version of this file
- * under either the MPL or the GPL.
- */
-
-#ifndef _LINUX_TI113X_H
-#define _LINUX_TI113X_H
-
-#ifndef PCI_VENDOR_ID_TI
-#define PCI_VENDOR_ID_TI 0x104c
-#endif
-
-#ifndef PCI_DEVICE_ID_TI_1130
-#define PCI_DEVICE_ID_TI_1130 0xac12
-#endif
-#ifndef PCI_DEVICE_ID_TI_1031
-#define PCI_DEVICE_ID_TI_1031 0xac13
-#endif
-#ifndef PCI_DEVICE_ID_TI_1131
-#define PCI_DEVICE_ID_TI_1131 0xac15
-#endif
-#ifndef PCI_DEVICE_ID_TI_1210
-#define PCI_DEVICE_ID_TI_1210 0xac1a
-#endif
-#ifndef PCI_DEVICE_ID_TI_1211
-#define PCI_DEVICE_ID_TI_1211 0xac1e
-#endif
-#ifndef PCI_DEVICE_ID_TI_1220
-#define PCI_DEVICE_ID_TI_1220 0xac17
-#endif
-#ifndef PCI_DEVICE_ID_TI_1221
-#define PCI_DEVICE_ID_TI_1221 0xac19
-#endif
-#ifndef PCI_DEVICE_ID_TI_1250A
-#define PCI_DEVICE_ID_TI_1250A 0xac16
-#endif
-#ifndef PCI_DEVICE_ID_TI_1225
-#define PCI_DEVICE_ID_TI_1225 0xac1c
-#endif
-#ifndef PCI_DEVICE_ID_TI_1251A
-#define PCI_DEVICE_ID_TI_1251A 0xac1d
-#endif
-#ifndef PCI_DEVICE_ID_TI_1251B
-#define PCI_DEVICE_ID_TI_1251B 0xac1f
-#endif
-#ifndef PCI_DEVICE_ID_TI_1410
-#define PCI_DEVICE_ID_TI_1410 0xac50
-#endif
-#ifndef PCI_DEVICE_ID_TI_1420
-#define PCI_DEVICE_ID_TI_1420 0xac51
-#endif
-#ifndef PCI_DEVICE_ID_TI_1450
-#define PCI_DEVICE_ID_TI_1450 0xac1b
-#endif
-#ifndef PCI_DEVICE_ID_TI_1451
-#define PCI_DEVICE_ID_TI_1451 0xac52
-#endif
-#ifndef PCI_DEVICE_ID_TI_1510
-#define PCI_DEVICE_ID_TI_1510 0xac56
-#endif
-#ifndef PCI_DEVICE_ID_TI_4410
-#define PCI_DEVICE_ID_TI_4410 0xac41
-#endif
-#ifndef PCI_DEVICE_ID_TI_4450
-#define PCI_DEVICE_ID_TI_4450 0xac40
-#endif
-#ifndef PCI_DEVICE_ID_TI_4451
-#define PCI_DEVICE_ID_TI_4451 0xac42
-#endif
-
-/* Register definitions for TI 113X PCI-to-CardBus bridges */
-
-/* System Control Register */
-#define TI113X_SYSTEM_CONTROL 0x80 /* 32 bit */
-#define TI113X_SCR_SMIROUTE 0x04000000
-#define TI113X_SCR_SMISTATUS 0x02000000
-#define TI113X_SCR_SMIENB 0x01000000
-#define TI113X_SCR_VCCPROT 0x00200000
-#define TI113X_SCR_REDUCEZV 0x00100000
-#define TI113X_SCR_CDREQEN 0x00080000
-#define TI113X_SCR_CDMACHAN 0x00070000
-#define TI113X_SCR_SOCACTIVE 0x00002000
-#define TI113X_SCR_PWRSTREAM 0x00000800
-#define TI113X_SCR_DELAYUP 0x00000400
-#define TI113X_SCR_DELAYDOWN 0x00000200
-#define TI113X_SCR_INTERROGATE 0x00000100
-#define TI113X_SCR_CLKRUN_SEL 0x00000080
-#define TI113X_SCR_PWRSAVINGS 0x00000040
-#define TI113X_SCR_SUBSYSRW 0x00000020
-#define TI113X_SCR_CB_DPAR 0x00000010
-#define TI113X_SCR_CDMA_EN 0x00000008
-#define TI113X_SCR_ASYNC_IRQ 0x00000004
-#define TI113X_SCR_KEEPCLK 0x00000002
-#define TI113X_SCR_CLKRUN_ENA 0x00000001
-
-#define TI122X_SCR_SER_STEP 0xc0000000
-#define TI122X_SCR_INTRTIE 0x20000000
-#define TI122X_SCR_P2CCLK 0x08000000
-#define TI122X_SCR_CBRSVD 0x00400000
-#define TI122X_SCR_MRBURSTDN 0x00008000
-#define TI122X_SCR_MRBURSTUP 0x00004000
-#define TI122X_SCR_RIMUX 0x00000001
-
-/* Multimedia Control Register */
-#define TI1250_MULTIMEDIA_CTL 0x84 /* 8 bit */
-#define TI1250_MMC_ZVOUTEN 0x80
-#define TI1250_MMC_PORTSEL 0x40
-#define TI1250_MMC_ZVEN1 0x02
-#define TI1250_MMC_ZVEN0 0x01
-
-#define TI1250_GENERAL_STATUS 0x85 /* 8 bit */
-#define TI1250_GPIO0_CONTROL 0x88 /* 8 bit */
-#define TI1250_GPIO1_CONTROL 0x89 /* 8 bit */
-#define TI1250_GPIO2_CONTROL 0x8a /* 8 bit */
-#define TI1250_GPIO3_CONTROL 0x8b /* 8 bit */
-#define TI12XX_IRQMUX 0x8c /* 32 bit */
-
-/* Retry Status Register */
-#define TI113X_RETRY_STATUS 0x90 /* 8 bit */
-#define TI113X_RSR_PCIRETRY 0x80
-#define TI113X_RSR_CBRETRY 0x40
-#define TI113X_RSR_TEXP_CBB 0x20
-#define TI113X_RSR_MEXP_CBB 0x10
-#define TI113X_RSR_TEXP_CBA 0x08
-#define TI113X_RSR_MEXP_CBA 0x04
-#define TI113X_RSR_TEXP_PCI 0x02
-#define TI113X_RSR_MEXP_PCI 0x01
-
-/* Card Control Register */
-#define TI113X_CARD_CONTROL 0x91 /* 8 bit */
-#define TI113X_CCR_RIENB 0x80
-#define TI113X_CCR_ZVENABLE 0x40
-#define TI113X_CCR_PCI_IRQ_ENA 0x20
-#define TI113X_CCR_PCI_IREQ 0x10
-#define TI113X_CCR_PCI_CSC 0x08
-#define TI113X_CCR_SPKROUTEN 0x02
-#define TI113X_CCR_IFG 0x01
-
-#define TI1220_CCR_PORT_SEL 0x20
-#define TI122X_CCR_AUD2MUX 0x04
-
-/* Device Control Register */
-#define TI113X_DEVICE_CONTROL 0x92 /* 8 bit */
-#define TI113X_DCR_5V_FORCE 0x40
-#define TI113X_DCR_3V_FORCE 0x20
-#define TI113X_DCR_IMODE_MASK 0x06
-#define TI113X_DCR_IMODE_ISA 0x02
-#define TI113X_DCR_IMODE_SERIAL 0x04
-
-#define TI12XX_DCR_IMODE_PCI_ONLY 0x00
-#define TI12XX_DCR_IMODE_ALL_SERIAL 0x06
-
-/* Buffer Control Register */
-#define TI113X_BUFFER_CONTROL 0x93 /* 8 bit */
-#define TI113X_BCR_CB_READ_DEPTH 0x08
-#define TI113X_BCR_CB_WRITE_DEPTH 0x04
-#define TI113X_BCR_PCI_READ_DEPTH 0x02
-#define TI113X_BCR_PCI_WRITE_DEPTH 0x01
-
-/* Diagnostic Register */
-#define TI1250_DIAGNOSTIC 0x93 /* 8 bit */
-#define TI1250_DIAG_TRUE_VALUE 0x80
-#define TI1250_DIAG_PCI_IREQ 0x40
-#define TI1250_DIAG_PCI_CSC 0x20
-#define TI1250_DIAG_ASYNC_CSC 0x01
-
-/* DMA Registers */
-#define TI113X_DMA_0 0x94 /* 32 bit */
-#define TI113X_DMA_1 0x98 /* 32 bit */
-
-/* ExCA IO offset registers */
-#define TI113X_IO_OFFSET(map) (0x36+((map)<<1))
-
-/* Data structure for tracking vendor-specific state */
-typedef struct ti113x_state_t {
- u32 sysctl; /* TI113X_SYSTEM_CONTROL */
- u8 cardctl; /* TI113X_CARD_CONTROL */
- u8 devctl; /* TI113X_DEVICE_CONTROL */
- u8 diag; /* TI1250_DIAGNOSTIC */
- u32 irqmux; /* TI12XX_IRQMUX */
-} ti113x_state_t;
-
-#define TI_PCIC_ID \
- IS_TI1130, IS_TI1131, IS_TI1031, IS_TI1210, IS_TI1211, \
- IS_TI1220, IS_TI1221, IS_TI1225, IS_TI1250A, IS_TI1251A, \
- IS_TI1251B, IS_TI1410, IS_TI1420, IS_TI1450, IS_TI1451, \
- IS_TI1510, IS_TI4410, IS_TI4450, IS_TI4451
-
-#define TI_PCIC_INFO \
- { "TI 1130", IS_TI|IS_CARDBUS, ID(TI, 1130) }, \
- { "TI 1131", IS_TI|IS_CARDBUS, ID(TI, 1131) }, \
- { "TI 1031", IS_TI|IS_CARDBUS, ID(TI, 1031) }, \
- { "TI 1210", IS_TI|IS_CARDBUS, ID(TI, 1210) }, \
- { "TI 1211", IS_TI|IS_CARDBUS, ID(TI, 1211) }, \
- { "TI 1220", IS_TI|IS_CARDBUS, ID(TI, 1220) }, \
- { "TI 1221", IS_TI|IS_CARDBUS, ID(TI, 1221) }, \
- { "TI 1225", IS_TI|IS_CARDBUS, ID(TI, 1225) }, \
- { "TI 1250A", IS_TI|IS_CARDBUS, ID(TI, 1250A) }, \
- { "TI 1251A", IS_TI|IS_CARDBUS, ID(TI, 1251A) }, \
- { "TI 1251B", IS_TI|IS_CARDBUS, ID(TI, 1251B) }, \
- { "TI 1410", IS_TI|IS_CARDBUS, ID(TI, 1410) }, \
- { "TI 1420", IS_TI|IS_CARDBUS, ID(TI, 1420) }, \
- { "TI 1450", IS_TI|IS_CARDBUS, ID(TI, 1450) }, \
- { "TI 1451", IS_TI|IS_CARDBUS, ID(TI, 1451) }, \
- { "TI 1510", IS_TI|IS_CARDBUS, ID(TI, 1510) }, \
- { "TI 4410", IS_TI|IS_CARDBUS, ID(TI, 4410) }, \
- { "TI 4450", IS_TI|IS_CARDBUS, ID(TI, 4450) }, \
- { "TI 4451", IS_TI|IS_CARDBUS, ID(TI, 4451) }
-
-#endif /* _LINUX_TI113X_H */
diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl
index 5fcef9c..36d5975 100644
--- a/include/ppc_asm.tmpl
+++ b/include/ppc_asm.tmpl
@@ -80,7 +80,7 @@
#define r31 31
-#if defined(CONFIG_8xx) || defined(CONFIG_MPC824X)
+#if defined(CONFIG_8xx)
/* Some special registers */
@@ -92,7 +92,7 @@
#define LCTRL2 157 /* Load/Store Support (37-41) */
#define ICTRL 158
-#endif /* CONFIG_8xx, CONFIG_MPC824X */
+#endif /* CONFIG_8xx */
#if defined(CONFIG_5xx)
diff --git a/post/drivers/memory.c b/post/drivers/memory.c
index d94a437..d512fa5 100644
--- a/post/drivers/memory.c
+++ b/post/drivers/memory.c
@@ -170,7 +170,7 @@ DECLARE_GLOBAL_DATA_PTR;
*/
static void move64(const unsigned long long *src, unsigned long long *dest)
{
-#if defined(CONFIG_MPC8260) || defined(CONFIG_MPC824X)
+#if defined(CONFIG_MPC8260)
asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */
"stfd 0, 0(4)" /* *dest = fpr0 */
: : : "fr0" ); /* Clobbers fr0 */