diff options
| author | Tom Rini <trini@ti.com> | 2014-11-07 16:18:35 -0500 |
|---|---|---|
| committer | Tom Rini <trini@ti.com> | 2014-11-07 16:18:35 -0500 |
| commit | cfa1bd0774eafcba4791bad4d66f01b8f0dc6f94 (patch) | |
| tree | 13740fe096447814d65871bc9c15bbac26b0e854 | |
| parent | 11ada9225a16ed2d8ddbf0715a2416245a777cbc (diff) | |
| parent | 40bbd52a79bdf2175a2e44272bead2bc194a3293 (diff) | |
| download | u-boot-imx-cfa1bd0774eafcba4791bad4d66f01b8f0dc6f94.zip u-boot-imx-cfa1bd0774eafcba4791bad4d66f01b8f0dc6f94.tar.gz u-boot-imx-cfa1bd0774eafcba4791bad4d66f01b8f0dc6f94.tar.bz2 | |
Merge git://git.denx.de/u-boot-ti
41 files changed, 1336 insertions, 243 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/sys_info.c b/arch/arm/cpu/armv7/am33xx/sys_info.c index 2ce682f..781d83f 100644 --- a/arch/arm/cpu/armv7/am33xx/sys_info.c +++ b/arch/arm/cpu/armv7/am33xx/sys_info.c @@ -18,6 +18,7 @@ #include <asm/arch/cpu.h> #include <asm/arch/clock.h> #include <power/tps65910.h> +#include <linux/compiler.h> struct ctrl_stat *cstat = (struct ctrl_stat *)CTRL_BASE; @@ -51,11 +52,11 @@ u32 get_cpu_type(void) /** * get_board_rev() - setup to pass kernel board revision information - * returns:(bit[0-3] sub version, higher bit[7-4] is higher version) + * returns: 0 for the ATAG REVISION tag value. */ -u32 get_board_rev(void) +u32 __weak get_board_rev(void) { - return BOARD_REV_ID; + return 0; } /** diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig index c215404..a029379 100644 --- a/arch/arm/cpu/armv7/omap3/Kconfig +++ b/arch/arm/cpu/armv7/omap3/Kconfig @@ -22,6 +22,9 @@ config TARGET_CM_T35 bool "CompuLab CM-T3530 and CM-T3730 boards" select SUPPORT_SPL +config TARGET_CM_T3517 + bool "CompuLab CM-T3517 boards" + config TARGET_DEVKIT8000 bool "TimLL OMAP3 Devkit8000" select SUPPORT_SPL @@ -98,6 +101,7 @@ source "board/teejet/mt_ventoux/Kconfig" source "board/ti/sdp3430/Kconfig" source "board/ti/beagle/Kconfig" source "board/compulab/cm_t35/Kconfig" +source "board/compulab/cm_t3517/Kconfig" source "board/timll/devkit8000/Kconfig" source "board/ti/evm/Kconfig" source "board/isee/igep00x0/Kconfig" diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 33a82fc..7eacf27 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -14,8 +14,6 @@ #include <asm/ti-common/sys_proto.h> #include <asm/arch/cpu.h> -#define BOARD_REV_ID 0x0 - u32 get_cpu_rev(void); u32 get_sysboot_value(void); diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2e.h b/arch/arm/include/asm/arch-keystone/hardware-k2e.h index 9512756..df49995 100644 --- a/arch/arm/include/asm/arch-keystone/hardware-k2e.h +++ b/arch/arm/include/asm/arch-keystone/hardware-k2e.h @@ -57,8 +57,6 @@ #define KS2_NETCP_PDMA_SCHED_BASE 0x24186100 #define KS2_NETCP_PDMA_RX_FLOW_BASE 0x24189000 #define KS2_NETCP_PDMA_RX_FLOW_NUM 96 -#define KS2_NETCP_PDMA_RX_FREE_QUEUE 4001 -#define KS2_NETCP_PDMA_RX_RCV_QUEUE 4002 #define KS2_NETCP_PDMA_TX_SND_QUEUE 896 /* NETCP */ diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h index 5a9ea4f..195c0d3 100644 --- a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h +++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h @@ -98,8 +98,6 @@ #define KS2_NETCP_PDMA_SCHED_BASE 0x02004c00 #define KS2_NETCP_PDMA_RX_FLOW_BASE 0x02005000 #define KS2_NETCP_PDMA_RX_FLOW_NUM 32 -#define KS2_NETCP_PDMA_RX_FREE_QUEUE 4001 -#define KS2_NETCP_PDMA_RX_RCV_QUEUE 4002 #define KS2_NETCP_PDMA_TX_SND_QUEUE 648 /* NETCP */ diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2l.h b/arch/arm/include/asm/arch-keystone/hardware-k2l.h index 05532ad..4f1197e 100644 --- a/arch/arm/include/asm/arch-keystone/hardware-k2l.h +++ b/arch/arm/include/asm/arch-keystone/hardware-k2l.h @@ -84,6 +84,10 @@ /* OSR memory size */ #define KS2_OSR_SIZE 0x100000 +/* SGMII SerDes */ +#define KS2_SGMII_SERDES2_BASE 0x02320000 +#define KS2_LANES_PER_SGMII_SERDES 2 + /* Number of DSP cores */ #define KS2_NUM_DSPS 4 @@ -98,4 +102,7 @@ #define KS2_NETCP_PDMA_RX_FLOW_NUM 96 #define KS2_NETCP_PDMA_TX_SND_QUEUE 896 +/* NETCP */ +#define KS2_NETCP_BASE 0x26000000 + #endif /* __ASM_ARCH_HARDWARE_K2L_H */ diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h index c6a54d8..be22bdb 100644 --- a/arch/arm/include/asm/arch-keystone/hardware.h +++ b/arch/arm/include/asm/arch-keystone/hardware.h @@ -122,6 +122,10 @@ typedef volatile unsigned int *dv_reg_p; #define KS2_EDMA_QEESR 0x108c #define KS2_EDMA_PARAM_1(x) (0x4020 + (4 * x)) +/* NETCP pktdma */ +#define KS2_NETCP_PDMA_RX_FREE_QUEUE 4001 +#define KS2_NETCP_PDMA_RX_RCV_QUEUE 4002 + /* Chip Interrupt Controller */ #define KS2_CIC2_BASE 0x02608000 diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c index d0b0930..886c723 100644 --- a/board/compulab/cm_t35/cm_t35.c +++ b/board/compulab/cm_t35/cm_t35.c @@ -19,12 +19,11 @@ #include <i2c.h> #include <usb.h> #include <mmc.h> -#include <nand.h> #include <twl4030.h> -#include <bmp_layout.h> #include <linux/compiler.h> #include <asm/io.h> +#include <asm/errno.h> #include <asm/arch/mem.h> #include <asm/arch/mux.h> #include <asm/arch/mmc_host_def.h> @@ -33,6 +32,7 @@ #include <asm/ehci-omap.h> #include <asm/gpio.h> +#include "../common/common.h" #include "../common/eeprom.h" DECLARE_GLOBAL_DATA_PTR; @@ -43,58 +43,6 @@ const omap3_sysinfo sysinfo = { "NAND", }; -static u32 gpmc_net_config[GPMC_MAX_REG] = { - NET_GPMC_CONFIG1, - NET_GPMC_CONFIG2, - NET_GPMC_CONFIG3, - NET_GPMC_CONFIG4, - NET_GPMC_CONFIG5, - NET_GPMC_CONFIG6, - 0 -}; - -#ifdef CONFIG_LCD -#ifdef CONFIG_CMD_NAND -static int splash_load_from_nand(u32 bmp_load_addr) -{ - struct bmp_header *bmp_hdr; - int res, splash_screen_nand_offset = 0x100000; - size_t bmp_size, bmp_header_size = sizeof(struct bmp_header); - - if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp) - goto splash_address_too_high; - - res = nand_read_skip_bad(&nand_info[nand_curr_device], - splash_screen_nand_offset, &bmp_header_size, - NULL, nand_info[nand_curr_device].size, - (u_char *)bmp_load_addr); - if (res < 0) - return res; - - bmp_hdr = (struct bmp_header *)bmp_load_addr; - bmp_size = le32_to_cpu(bmp_hdr->file_size); - - if (bmp_load_addr + bmp_size >= gd->start_addr_sp) - goto splash_address_too_high; - - return nand_read_skip_bad(&nand_info[nand_curr_device], - splash_screen_nand_offset, &bmp_size, - NULL, nand_info[nand_curr_device].size, - (u_char *)bmp_load_addr); - -splash_address_too_high: - printf("Error: splashimage address too high. Data overwrites U-Boot " - "and/or placed beyond DRAM boundaries.\n"); - - return -1; -} -#else -static inline int splash_load_from_nand(void) -{ - return -1; -} -#endif /* CONFIG_CMD_NAND */ - #ifdef CONFIG_SPL_BUILD /* * Routine: get_board_mem_timings @@ -111,24 +59,12 @@ void get_board_mem_timings(struct board_sdrc_timings *timings) } #endif +#define CM_T35_SPLASH_NAND_OFFSET 0x100000 + int splash_screen_prepare(void) { - char *env_splashimage_value; - u32 bmp_load_addr; - - env_splashimage_value = getenv("splashimage"); - if (env_splashimage_value == NULL) - return -1; - - bmp_load_addr = simple_strtoul(env_splashimage_value, 0, 16); - if (bmp_load_addr == 0) { - printf("Error: bad splashimage address specified\n"); - return -1; - } - - return splash_load_from_nand(bmp_load_addr); + return cl_splash_screen_prepare(CM_T35_SPLASH_NAND_OFFSET); } -#endif /* CONFIG_LCD */ /* * Routine: board_init @@ -154,34 +90,18 @@ int board_init(void) return 0; } -static u32 cm_t3x_rev; - /* * Routine: get_board_rev * Description: read system revision */ u32 get_board_rev(void) { - if (!cm_t3x_rev) - cm_t3x_rev = cl_eeprom_get_board_rev(); - - return cm_t3x_rev; + return cl_eeprom_get_board_rev(); }; -/* - * Routine: misc_init_r - * Description: display die ID - */ int misc_init_r(void) { - u32 board_rev = get_board_rev(); - u32 rev_major = board_rev / 100; - u32 rev_minor = board_rev - (rev_major * 100); - - if ((rev_minor / 10) * 10 == rev_minor) - rev_minor = rev_minor / 10; - - printf("PCB: %u.%u\n", rev_major, rev_minor); + cl_print_pcb_info(); dieid_num_r(); return 0; @@ -462,37 +382,12 @@ int board_mmc_init(bd_t *bis) } #endif -/* - * Routine: setup_net_chip_gmpc - * Description: Setting up the configuration GPMC registers specific to the - * Ethernet hardware. - */ -static void setup_net_chip_gmpc(void) -{ - struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; - - enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[5], - CM_T3X_SMC911X_BASE, GPMC_SIZE_16M); - enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[4], - SB_T35_SMC911X_BASE, GPMC_SIZE_16M); - - /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ - writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); - - /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); - - /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, - &ctrl_base->gpmc_nadv_ale); -} - #ifdef CONFIG_SYS_I2C_OMAP34XX /* * Routine: reset_net_chip * Description: reset the Ethernet controller via TPS65930 GPIO */ -static void reset_net_chip(void) +static int cm_t3x_reset_net_chip(int gpio) { /* Set GPIO1 of TPS65930 as output */ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x03, @@ -507,9 +402,10 @@ static void reset_net_chip(void) twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x0C, 0x02); mdelay(1); + return 0; } #else -static inline void reset_net_chip(void) {} +static inline int cm_t3x_reset_net_chip(int gpio) { return 0; } #endif #ifdef CONFIG_SMC911X @@ -536,7 +432,6 @@ static int handle_mac_address(void) return eth_setenv_enetaddr("ethaddr", enetaddr); } - /* * Routine: board_eth_init * Description: initialize module and base-board Ethernet chips @@ -545,18 +440,16 @@ int board_eth_init(bd_t *bis) { int rc = 0, rc1 = 0; - setup_net_chip_gmpc(); - reset_net_chip(); - rc1 = handle_mac_address(); if (rc1) printf("No MAC address found! "); - rc1 = smc911x_initialize(0, CM_T3X_SMC911X_BASE); + rc1 = cl_omap3_smc911x_init(0, 5, CM_T3X_SMC911X_BASE, + cm_t3x_reset_net_chip, -EINVAL); if (rc1 > 0) rc++; - rc1 = smc911x_initialize(1, SB_T35_SMC911X_BASE); + rc1 = cl_omap3_smc911x_init(1, 4, SB_T35_SMC911X_BASE, NULL, -EINVAL); if (rc1 > 0) rc++; @@ -564,16 +457,6 @@ int board_eth_init(bd_t *bis) } #endif -void __weak get_board_serial(struct tag_serialnr *serialnr) -{ - /* - * This corresponds to what happens when we can communicate with the - * eeprom but don't get a valid board serial value. - */ - serialnr->low = 0; - serialnr->high = 0; -}; - #ifdef CONFIG_USB_EHCI_OMAP struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, @@ -583,21 +466,12 @@ struct omap_usbhs_board_data usbhs_bdata = { #define SB_T35_USB_HUB_RESET_GPIO 167 int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **hccr, struct ehci_hcor **hcor) + struct ehci_hccr **hccr, struct ehci_hcor **hcor) { u8 val; int offset; - if (gpio_request(SB_T35_USB_HUB_RESET_GPIO, "SB-T35 usb hub reset")) { - printf("Error: can't obtain GPIO %d for SB-T35 usb hub reset", - SB_T35_USB_HUB_RESET_GPIO); - return -1; - } - - gpio_direction_output(SB_T35_USB_HUB_RESET_GPIO, 0); - udelay(10); - gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1); - udelay(1000); + cl_usb_hub_init(SB_T35_USB_HUB_RESET_GPIO, "sb-t35 hub rst"); offset = TWL4030_BASEADD_GPIO + TWL4030_GPIO_GPIODATADIR1; twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, offset, &val); @@ -614,6 +488,7 @@ int ehci_hcd_init(int index, enum usb_init_type init, int ehci_hcd_stop(void) { + cl_usb_hub_deinit(SB_T35_USB_HUB_RESET_GPIO); return omap_ehci_hcd_stop(); } #endif /* CONFIG_USB_EHCI_OMAP */ diff --git a/board/compulab/cm_t3517/Kconfig b/board/compulab/cm_t3517/Kconfig new file mode 100644 index 0000000..2f5473d --- /dev/null +++ b/board/compulab/cm_t3517/Kconfig @@ -0,0 +1,12 @@ +if TARGET_CM_T3517 + +config SYS_BOARD + default "cm_t3517" + +config SYS_VENDOR + default "compulab" + +config SYS_CONFIG_NAME + default "cm_t3517" + +endif diff --git a/board/compulab/cm_t3517/MAINTAINERS b/board/compulab/cm_t3517/MAINTAINERS new file mode 100644 index 0000000..fbb6882 --- /dev/null +++ b/board/compulab/cm_t3517/MAINTAINERS @@ -0,0 +1,6 @@ +CM_T3517 BOARD +M: Igor Grinberg <grinberg@compulab.co.il> +S: Maintained +F: board/compulab/cm_t3517/ +F: include/configs/cm_t3517.h +F: configs/cm_t3517_defconfig diff --git a/board/compulab/cm_t3517/Makefile b/board/compulab/cm_t3517/Makefile new file mode 100644 index 0000000..4f0db01 --- /dev/null +++ b/board/compulab/cm_t3517/Makefile @@ -0,0 +1,9 @@ +# +# (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il> +# +# Authors: Igor Grinberg <grinberg@compulab.co.il> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += cm_t3517.o mux.o diff --git a/board/compulab/cm_t3517/cm_t3517.c b/board/compulab/cm_t3517/cm_t3517.c new file mode 100644 index 0000000..cac1ad9 --- /dev/null +++ b/board/compulab/cm_t3517/cm_t3517.c @@ -0,0 +1,231 @@ +/* + * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Igor Grinberg <grinberg@compulab.co.il> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <status_led.h> +#include <net.h> +#include <netdev.h> +#include <usb.h> +#include <mmc.h> +#include <linux/compiler.h> +#include <linux/usb/musb.h> + +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/am35x_def.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/musb.h> +#include <asm/omap_musb.h> +#include <asm/ehci-omap.h> + +#include "../common/common.h" +#include "../common/eeprom.h" + +DECLARE_GLOBAL_DATA_PTR; + +const omap3_sysinfo sysinfo = { + DDR_DISCRETE, + "CM-T3517 board", + "NAND 128/512M", +}; + +#ifdef CONFIG_USB_MUSB_AM35X +static struct musb_hdrc_config cm_t3517_musb_config = { + .multipoint = 1, + .dyn_fifo = 1, + .num_eps = 16, + .ram_bits = 12, +}; + +static struct omap_musb_board_data cm_t3517_musb_board_data = { + .set_phy_power = am35x_musb_phy_power, + .clear_irq = am35x_musb_clear_irq, + .reset = am35x_musb_reset, +}; + +static struct musb_hdrc_platform_data cm_t3517_musb_pdata = { +#if defined(CONFIG_MUSB_HOST) + .mode = MUSB_HOST, +#elif defined(CONFIG_MUSB_GADGET) + .mode = MUSB_PERIPHERAL, +#else +#error "Please define either CONFIG_MUSB_HOST or CONFIG_MUSB_GADGET" +#endif + .config = &cm_t3517_musb_config, + .power = 250, + .platform_ops = &am35x_ops, + .board_data = &cm_t3517_musb_board_data, +}; + +static void cm_t3517_musb_init(void) +{ + /* + * Set up USB clock/mode in the DEVCONF2 register. + * USB2.0 PHY reference clock is 13 MHz + */ + clrsetbits_le32(&am35x_scm_general_regs->devconf2, + CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE, + CONF2_REFFREQ_13MHZ | CONF2_SESENDEN | + CONF2_VBDTCTEN | CONF2_DATPOL); + + if (musb_register(&cm_t3517_musb_pdata, &cm_t3517_musb_board_data, + (void *)AM35XX_IPSS_USBOTGSS_BASE)) + printf("Failed initializing AM35x MUSB!\n"); +} +#else +static inline void am3517_evm_musb_init(void) {} +#endif + +int board_init(void) +{ + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + + /* boot param addr */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + +#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) + status_led_set(STATUS_LED_BOOT, STATUS_LED_ON); +#endif + + cm_t3517_musb_init(); + + return 0; +} + +int misc_init_r(void) +{ + cl_print_pcb_info(); + dieid_num_r(); + + return 0; +} + +#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) +#define SB_T35_CD_GPIO 144 +#define SB_T35_WP_GPIO 59 + +int board_mmc_init(bd_t *bis) +{ + return omap_mmc_init(0, 0, 0, SB_T35_CD_GPIO, SB_T35_WP_GPIO); +} +#endif + +#ifdef CONFIG_DRIVER_TI_EMAC +#define CONTROL_EFUSE_EMAC_LSB 0x48002380 +#define CONTROL_EFUSE_EMAC_MSB 0x48002384 + +static int am3517_get_efuse_enetaddr(u8 *enetaddr) +{ + u32 lsb = __raw_readl(CONTROL_EFUSE_EMAC_LSB); + u32 msb = __raw_readl(CONTROL_EFUSE_EMAC_MSB); + + enetaddr[0] = (u8)((msb >> 16) & 0xff); + enetaddr[1] = (u8)((msb >> 8) & 0xff); + enetaddr[2] = (u8)(msb & 0xff); + enetaddr[3] = (u8)((lsb >> 16) & 0xff); + enetaddr[4] = (u8)((lsb >> 8) & 0xff); + enetaddr[5] = (u8)(lsb & 0xff); + + return is_valid_ether_addr(enetaddr); +} + +static inline int cm_t3517_init_emac(bd_t *bis) +{ + int ret = cpu_eth_init(bis); + + if (ret > 0) + return ret; + + printf("Failed initializing EMAC! "); + return 0; +} +#else /* !CONFIG_DRIVER_TI_EMAC */ +static inline int am3517_get_efuse_enetaddr(u8 *enetaddr) { return 1; } +static inline int cm_t3517_init_emac(bd_t *bis) { return 0; } +#endif /* CONFIG_DRIVER_TI_EMAC */ + +/* + * Routine: handle_mac_address + * Description: prepare MAC address for on-board Ethernet. + */ +static int cm_t3517_handle_mac_address(void) +{ + unsigned char enetaddr[6]; + int ret; + + ret = eth_getenv_enetaddr("ethaddr", enetaddr); + if (ret) + return 0; + + ret = cl_eeprom_read_mac_addr(enetaddr); + if (ret) { + ret = am3517_get_efuse_enetaddr(enetaddr); + if (ret) + return ret; + } + + if (!is_valid_ether_addr(enetaddr)) + return -1; + + return eth_setenv_enetaddr("ethaddr", enetaddr); +} + +#define SB_T35_ETH_RST_GPIO 164 + +/* + * Routine: board_eth_init + * Description: initialize module and base-board Ethernet chips + */ +int board_eth_init(bd_t *bis) +{ + int rc = 0, rc1 = 0; + + rc1 = cm_t3517_handle_mac_address(); + if (rc1) + printf("No MAC address found! "); + + rc1 = cm_t3517_init_emac(bis); + if (rc1 > 0) + rc++; + + rc1 = cl_omap3_smc911x_init(0, 4, CONFIG_SMC911X_BASE, + NULL, SB_T35_ETH_RST_GPIO); + if (rc1 > 0) + rc++; + + return rc; +} + +#ifdef CONFIG_USB_EHCI_OMAP +static struct omap_usbhs_board_data cm_t3517_usbhs_bdata = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, +}; + +#define CM_T3517_USB_HUB_RESET_GPIO 152 +#define SB_T35_USB_HUB_RESET_GPIO 98 + +int ehci_hcd_init(int index, enum usb_init_type init, + struct ehci_hccr **hccr, struct ehci_hcor **hcor) +{ + cl_usb_hub_init(CM_T3517_USB_HUB_RESET_GPIO, "cm-t3517 hub rst"); + cl_usb_hub_init(SB_T35_USB_HUB_RESET_GPIO, "sb-t35 hub rst"); + + return omap_ehci_hcd_init(index, &cm_t3517_usbhs_bdata, hccr, hcor); +} + +int ehci_hcd_stop(void) +{ + cl_usb_hub_deinit(CM_T3517_USB_HUB_RESET_GPIO); + cl_usb_hub_deinit(SB_T35_USB_HUB_RESET_GPIO); + + return omap_ehci_hcd_stop(); +} +#endif /* CONFIG_USB_EHCI_OMAP */ diff --git a/board/compulab/cm_t3517/mux.c b/board/compulab/cm_t3517/mux.c new file mode 100644 index 0000000..88ce2cc --- /dev/null +++ b/board/compulab/cm_t3517/mux.c @@ -0,0 +1,236 @@ +/* + * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Igor Grinberg <grinberg@compulab.co.il> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mux.h> +#include <asm/io.h> + +void set_muxconf_regs(void) +{ + /* SDRC */ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)); + + /* GPMC */ + MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)); + + /* SB-T35 Ethernet */ + MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)); + /* DVI enable */ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | DIS | M4));/*GPIO_54*/ + /* DataImage backlight */ + MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | DIS | M4));/*GPIO_58*/ + + /* SB-T35 SD/MMC WP GPIO59 */ + MUX_VAL(CP(GPMC_CLK), (IEN | PTU | EN | M4)); /*GPIO_59*/ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)); + /* SB-T35 Audio Enable GPIO61 */ + MUX_VAL(CP(GPMC_NBE1), (IDIS | PTU | EN | M4)); /*GPIO_61*/ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)); + /* SB-T35 Ethernet IRQ GPIO65 */ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)); /*GPIO_65*/ + + /* UART3 Console */ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)); + /* RTC V3020 nCS GPIO163 */ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTU | EN | M4)); /*GPIO_163*/ + /* SB-T35 Ethernet nRESET GPIO164 */ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTU | EN | M4)); /*GPIO_164*/ + + /* SB-T35 SD/MMC CD GPIO144 */ + MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M4)); /*GPIO_144*/ + /* WIFI nRESET GPIO145 */ + MUX_VAL(CP(UART2_RTS), (IEN | PTD | EN | M4)); /*GPIO_145*/ + /* USB1 PHY Reset GPIO 146 */ + MUX_VAL(CP(UART2_TX), (IEN | PTD | EN | M4)); /*GPIO_146*/ + /* USB2 PHY Reset GPIO 147 */ + MUX_VAL(CP(UART2_RX), (IEN | PTD | EN | M4)); /*GPIO_147*/ + + /* MMC1 */ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)); + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)); + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)); + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)); + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)); + + /* DSS */ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)); + + /* I2C */ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)); + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)); + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)); + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)); + + /* SB-T35 USB HUB Reset GPIO98 */ + MUX_VAL(CP(CCDC_WEN), (IDIS | PTU | EN | M4)); /*GPIO_98*/ + /* CM-T3517 USB HUB Reset GPIO152 */ + MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)); /*GPIO_152*/ + + /* RMII */ + MUX_VAL(CP(RMII_MDIO_DATA), (IEN | PTU | EN | M0)); + MUX_VAL(CP(RMII_MDIO_CLK), (M0)); + MUX_VAL(CP(RMII_RXD0), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(RMII_RXD1), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(RMII_RXER), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(RMII_TXD0), (IDIS | M0)); + MUX_VAL(CP(RMII_TXD1), (IDIS | M0)); + MUX_VAL(CP(RMII_TXEN), (IDIS | M0)); + MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTU | DIS | M0)); + + /* Green LED GPIO186 */ + MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTU | DIS | M4)); /*GPIO_186*/ + + /* SPI */ + MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M1)); /*MCSPI4_CLK*/ + MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | DIS | M1)); /*MCSPI4_SIMO*/ + MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M1)); /*MCSPI4_SOMI*/ + MUX_VAL(CP(MCBSP1_FSX), (IEN | PTU | EN | M1)); /*MCSPI4_CS0*/ + /* LCD reset GPIO157 */ + MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | DIS | M4)); /*GPIO_157*/ + + /* RTC V3020 CS Enable GPIO160 */ + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTD | EN | M4)); /*GPIO_160*/ + /* SB-T35 LVDS Transmitter SHDN GPIO162 */ + MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTU | DIS | M4)); /*GPIO_162*/ + + /* USB0 - mUSB */ + MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0)); + /* USB1 EHCI */ + MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT0*/ + MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT1*/ + MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT2*/ + MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT3*/ + MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT4*/ + MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT5*/ + MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT6*/ + MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT7*/ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DIR*/ + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_NXT*/ + MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M3)); /*HSUSB1_CLK*/ + MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB1_STP*/ + /* USB2 EHCI */ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DT0*/ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DT1*/ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M3)); /*HSUSB2_DT2*/ + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M3)); /*HSUSB2_DT3*/ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | EN | M3)); /*HSUSB2_DT4*/ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | EN | M3)); /*HSUSB2_DT5*/ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M3)); /*HSUSB2_DT6*/ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | EN | M3)); /*HSUSB2_DT7*/ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DIR*/ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_NXT*/ + MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)); /*HSUSB2_CLK*/ + MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB2_STP*/ + + /* SYS_BOOT */ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTU | DIS | M4)); /*GPIO_2*/ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTU | DIS | M4)); /*GPIO_3*/ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTU | DIS | M4)); /*GPIO_4*/ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTU | DIS | M4)); /*GPIO_5*/ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTU | DIS | M4)); /*GPIO_6*/ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTU | DIS | M4)); /*GPIO_7*/ +} diff --git a/board/compulab/cm_t54/cm_t54.c b/board/compulab/cm_t54/cm_t54.c index 944b723..b1a067d 100644 --- a/board/compulab/cm_t54/cm_t54.c +++ b/board/compulab/cm_t54/cm_t54.c @@ -100,16 +100,11 @@ uint mmc_get_env_part(struct mmc *mmc) #define SB_T54_CD_GPIO 228 #define SB_T54_WP_GPIO 229 -int board_mmc_getcd(struct mmc *mmc) -{ - return !gpio_get_value(SB_T54_CD_GPIO); -} - int board_mmc_init(bd_t *bis) { int ret0, ret1; - ret0 = omap_mmc_init(0, 0, 0, -1, SB_T54_WP_GPIO); + ret0 = omap_mmc_init(0, 0, 0, SB_T54_CD_GPIO, SB_T54_WP_GPIO); if (ret0) printf("cm_t54: failed to initialize mmc0\n"); diff --git a/board/compulab/common/Makefile b/board/compulab/common/Makefile index 4044ac9..dbf0009 100644 --- a/board/compulab/common/Makefile +++ b/board/compulab/common/Makefile @@ -6,5 +6,8 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_SYS_I2C) += eeprom.o -obj-$(CONFIG_LCD) += omap3_display.o +obj-y += common.o +obj-$(CONFIG_SYS_I2C) += eeprom.o +obj-$(CONFIG_LCD) += omap3_display.o +obj-$(CONFIG_SPLASH_SCREEN) += splash.o +obj-$(CONFIG_SMC911X) += omap3_smc911x.o diff --git a/board/compulab/common/common.c b/board/compulab/common/common.c new file mode 100644 index 0000000..b25d9a2 --- /dev/null +++ b/board/compulab/common/common.c @@ -0,0 +1,59 @@ +/* + * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Igor Grinberg <grinberg@compulab.co.il> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/bootm.h> +#include <asm/gpio.h> + +#include "common.h" +#include "eeprom.h" + +void cl_print_pcb_info(void) +{ + u32 board_rev = get_board_rev(); + u32 rev_major = board_rev / 100; + u32 rev_minor = board_rev - (rev_major * 100); + + if ((rev_minor / 10) * 10 == rev_minor) + rev_minor = rev_minor / 10; + + printf("PCB: %u.%u\n", rev_major, rev_minor); +} + +#ifdef CONFIG_SERIAL_TAG +void __weak get_board_serial(struct tag_serialnr *serialnr) +{ + /* + * This corresponds to what happens when we can communicate with the + * eeprom but don't get a valid board serial value. + */ + serialnr->low = 0; + serialnr->high = 0; +}; +#endif + +#ifdef CONFIG_CMD_USB +int cl_usb_hub_init(int gpio, const char *label) +{ + if (gpio_request(gpio, label)) { + printf("Error: can't obtain GPIO%d for %s", gpio, label); + return -1; + } + + gpio_direction_output(gpio, 0); + udelay(10); + gpio_set_value(gpio, 1); + udelay(1000); + return 0; +} + +void cl_usb_hub_deinit(int gpio) +{ + gpio_free(gpio); +} +#endif diff --git a/board/compulab/common/common.h b/board/compulab/common/common.h new file mode 100644 index 0000000..68ffb11 --- /dev/null +++ b/board/compulab/common/common.h @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Igor Grinberg <grinberg@compulab.co.il> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CL_COMMON_ +#define _CL_COMMON_ + +#include <asm/errno.h> + +void cl_print_pcb_info(void); + +#ifdef CONFIG_CMD_USB +int cl_usb_hub_init(int gpio, const char *label); +void cl_usb_hub_deinit(int gpio); +#else /* !CONFIG_CMD_USB */ +static inline int cl_usb_hub_init(int gpio, const char *label) +{ + return -ENOSYS; +} +static inline void cl_usb_hub_deinit(int gpio) {} +#endif /* CONFIG_CMD_USB */ + +#ifdef CONFIG_SPLASH_SCREEN +int cl_splash_screen_prepare(int nand_offset); +#else /* !CONFIG_SPLASH_SCREEN */ +static inline int cl_splash_screen_prepare(int nand_offset) +{ + return -ENOSYS; +} +#endif /* CONFIG_SPLASH_SCREEN */ + +#ifdef CONFIG_SMC911X +int cl_omap3_smc911x_init(int id, int cs, u32 base_addr, + int (*reset)(int), int rst_gpio); +#else /* !CONFIG_SMC911X */ +static inline int cl_omap3_smc911x_init(int id, int cs, u32 base_addr, + int (*reset)(int), int rst_gpio) +{ + return -ENOSYS; +} +#endif /* CONFIG_SMC911X */ + +#endif /* _CL_COMMON_ */ diff --git a/board/compulab/common/eeprom.c b/board/compulab/common/eeprom.c index 2df3ada..a45e7be 100644 --- a/board/compulab/common/eeprom.c +++ b/board/compulab/common/eeprom.c @@ -109,23 +109,27 @@ int cl_eeprom_read_mac_addr(uchar *buf) return cl_eeprom_read(offset, buf, 6); } +static u32 board_rev; + /* * Routine: cl_eeprom_get_board_rev * Description: read system revision from eeprom */ u32 cl_eeprom_get_board_rev(void) { - u32 rev = 0; char str[5]; /* Legacy representation can contain at most 4 digits */ uint offset = BOARD_REV_OFFSET_LEGACY; + if (board_rev) + return board_rev; + if (cl_eeprom_setup_layout()) return 0; if (cl_eeprom_layout != LAYOUT_LEGACY) offset = BOARD_REV_OFFSET; - if (cl_eeprom_read(offset, (uchar *)&rev, BOARD_REV_SIZE)) + if (cl_eeprom_read(offset, (uchar *)&board_rev, BOARD_REV_SIZE)) return 0; /* @@ -133,9 +137,9 @@ u32 cl_eeprom_get_board_rev(void) * representation. i.e. for rev 1.00: 0x100 --> 0x64 */ if (cl_eeprom_layout == LAYOUT_LEGACY) { - sprintf(str, "%x", rev); - rev = simple_strtoul(str, NULL, 10); + sprintf(str, "%x", board_rev); + board_rev = simple_strtoul(str, NULL, 10); } - return rev; + return board_rev; }; diff --git a/board/compulab/common/omap3_smc911x.c b/board/compulab/common/omap3_smc911x.c new file mode 100644 index 0000000..4561661 --- /dev/null +++ b/board/compulab/common/omap3_smc911x.c @@ -0,0 +1,93 @@ +/* + * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Igor Grinberg <grinberg@compulab.co.il> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <netdev.h> + +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> + +#include "common.h" + +static u32 cl_omap3_smc911x_gpmc_net_config[GPMC_MAX_REG] = { + NET_GPMC_CONFIG1, + NET_GPMC_CONFIG2, + NET_GPMC_CONFIG3, + NET_GPMC_CONFIG4, + NET_GPMC_CONFIG5, + NET_GPMC_CONFIG6, + 0 +}; + +static void cl_omap3_smc911x_setup_net_chip_gmpc(int cs, u32 base_addr) +{ + struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; + + enable_gpmc_cs_config(cl_omap3_smc911x_gpmc_net_config, + &gpmc_cfg->cs[cs], base_addr, GPMC_SIZE_16M); + + /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ + writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); + + /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ + writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); + + /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ + writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, + &ctrl_base->gpmc_nadv_ale); +} + +#ifdef CONFIG_OMAP_GPIO +static int cl_omap3_smc911x_reset_net_chip(int gpio) +{ + int err; + + if (!gpio_is_valid(gpio)) + return -EINVAL; + + err = gpio_request(gpio, "eth rst"); + if (err) + return err; + + /* Set gpio as output and send a pulse */ + gpio_direction_output(gpio, 1); + udelay(1); + gpio_set_value(gpio, 0); + mdelay(40); + gpio_set_value(gpio, 1); + mdelay(1); + + return 0; +} +#else /* !CONFIG_OMAP_GPIO */ +static inline int cl_omap3_smc911x_reset_net_chip(int gpio) { return 0; } +#endif /* CONFIG_OMAP_GPIO */ + +int cl_omap3_smc911x_init(int id, int cs, u32 base_addr, + int (*reset)(int), int rst_gpio) +{ + int ret; + + cl_omap3_smc911x_setup_net_chip_gmpc(cs, base_addr); + + if (reset) + reset(rst_gpio); + else + cl_omap3_smc911x_reset_net_chip(rst_gpio); + + ret = smc911x_initialize(id, base_addr); + if (ret > 0) + return ret; + + printf("Failed initializing SMC911x! "); + return 0; +} diff --git a/board/compulab/common/splash.c b/board/compulab/common/splash.c new file mode 100644 index 0000000..49ed49b --- /dev/null +++ b/board/compulab/common/splash.c @@ -0,0 +1,72 @@ +/* + * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Igor Grinberg <grinberg@compulab.co.il> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <nand.h> +#include <bmp_layout.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_CMD_NAND +static int splash_load_from_nand(u32 bmp_load_addr, int nand_offset) +{ + struct bmp_header *bmp_hdr; + int res; + size_t bmp_size, bmp_header_size = sizeof(struct bmp_header); + + if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp) + goto splash_address_too_high; + + res = nand_read_skip_bad(&nand_info[nand_curr_device], + nand_offset, &bmp_header_size, + NULL, nand_info[nand_curr_device].size, + (u_char *)bmp_load_addr); + if (res < 0) + return res; + + bmp_hdr = (struct bmp_header *)bmp_load_addr; + bmp_size = le32_to_cpu(bmp_hdr->file_size); + + if (bmp_load_addr + bmp_size >= gd->start_addr_sp) + goto splash_address_too_high; + + return nand_read_skip_bad(&nand_info[nand_curr_device], + nand_offset, &bmp_size, + NULL, nand_info[nand_curr_device].size, + (u_char *)bmp_load_addr); + +splash_address_too_high: + printf("Error: splashimage address too high. Data overwrites U-Boot " + "and/or placed beyond DRAM boundaries.\n"); + + return -1; +} +#else +static inline int splash_load_from_nand(u32 bmp_load_addr, int nand_offset) +{ + return -1; +} +#endif /* CONFIG_CMD_NAND */ + +int cl_splash_screen_prepare(int nand_offset) +{ + char *env_splashimage_value; + u32 bmp_load_addr; + + env_splashimage_value = getenv("splashimage"); + if (env_splashimage_value == NULL) + return -1; + + bmp_load_addr = simple_strtoul(env_splashimage_value, 0, 16); + if (bmp_load_addr == 0) { + printf("Error: bad splashimage address specified\n"); + return -1; + } + + return splash_load_from_nand(bmp_load_addr, nand_offset); +} diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c index 64e69dc..559af0e 100644 --- a/board/siemens/pxm2/board.c +++ b/board/siemens/pxm2/board.c @@ -229,7 +229,7 @@ int board_eth_init(bd_t *bis) #endif /* #ifdef CONFIG_FACTORYSET */ /* Set rgmii mode and enable rmii clock to be sourced from chip */ - writel(RGMII_MODE_ENABLE , &cdev->miisel); + writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel); rv = cpsw_register(&cpsw_data); if (rv < 0) diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig index b9f6bd7..1ddbb2c 100644 --- a/board/ti/am335x/Kconfig +++ b/board/ti/am335x/Kconfig @@ -22,4 +22,19 @@ config CONS_INDEX board you may want something other than UART0 as for example the IDK uses UART3 so enter 4 here. +config NOR + bool "Support for NOR flash" + help + The AM335x SoC supports having a NOR flash connected to the GPMC. + In practice this is seen as a NOR flash module connected to the + "memory cape" for the BeagleBone family. + +config NOR_BOOT + bool "Support for booting from NOR flash" + depends on NOR + help + Enabling this will make a U-Boot binary that is capable of being + booted via NOR. In this case we will enable certain pinmux early + as the ROM only partially sets up pinmux. We also default to using + NOR for environment. endif diff --git a/board/ti/ks2_evm/README b/board/ti/ks2_evm/README index a551e28..9ee90a4 100644 --- a/board/ti/ks2_evm/README +++ b/board/ti/ks2_evm/README @@ -3,10 +3,11 @@ U-Boot port for Texas Instruments Keystone II EVM boards Author: Murali Karicheri <m-karicheri2@ti.com> -This README has information on the u-boot port for K2HK, K2E boards. +This README has information on the u-boot port for K2HK, K2E, and K2L EVM boards. Documentation for this board can be found at http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html +https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html The K2HK board is based on Texas Instruments Keystone2 family of SoCs: K2H, K2K. More details on these SoCs are available at company websites @@ -14,7 +15,10 @@ More details on these SoCs are available at company websites K2H: http://www.ti.com/product/tci6638k2h The K2E SoC details are available at - K2E http://www.ti.com/lit/ds/symlink/66ak2e05.pdf + http://www.ti.com/lit/ds/symlink/66ak2e05.pdf + +The K2L SoC details are available at + http://www.ti.com/lit/ds/symlink/tci6630k2l.pdf Board configuration: ==================== @@ -25,6 +29,7 @@ Some of the peripherals that are configured by u-boot +------+-------+-------+-----------+-----------+-------+-------+----+ |K2HK |2 |512MB |6MB |4(2) |2 |3 |3 | |K2E |4 |512MB |2MB |8(2) |2 |3 |3 | +|K2L |2 |512MB |2MB |4(2) |4 |3 |3 | +------+-------+-------+-----------+-----------+-------+-------+----+ There are only 2 eth port installed on the boards. @@ -41,10 +46,13 @@ The port related files can be found at following folders Board configuration files: include/configs/k2hk_evm.h include/configs/k2e_evm.h +include/configs/k2l_evm.h +include/configs/k2l_evm.h As u-boot is migrating to Kconfig there is also board defconfig files configs/k2e_evm_defconfig configs/k2hk_evm_defconfig +configs/k2l_evm_defconfig Supported boot modes: - SPI NOR boot @@ -58,7 +66,7 @@ Supported image formats: Build instructions: =================== -Examples for k2hk, for k2e just replace k2hk prefix accordingly. +Examples for k2hk, for k2e and k2l just replace k2hk prefix accordingly. Don't forget to add ARCH=arm and CROSS_COMPILE. To build u-boot.bin @@ -84,6 +92,8 @@ Use u-boot.bin from the build folder for loading and running u-boot binary on EVM. Follow instructions at K2HK http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup K2E http://processors.wiki.ti.com/index.php/EVMK2E_Hardware_Setup +K2L http://processors.wiki.ti.com/index.php/TCIEVMK2L_Hardware_Setup + to configure SW1 dip switch to use "No Boot/JTAG DSP Little Endian Boot Mode" and Power ON the EVM. Follow instructions to connect serial port of EVM to PC and start TeraTerm or Hyper Terminal. @@ -128,8 +138,8 @@ instructions: 2. Suspend Target. Select Run -> Suspend from top level menu CortexA15_1 (Free Running)" 3. Load u-boot-spi.gph binary from build folder on to DDR address 0x87000000 - through CCS as described in step 2 of "Load and Run U-Boot on K2HK/K2E EVM - using CCS", but using address 0x87000000. + through CCS as described in step 2 of "Load and Run U-Boot on K2HK/K2E/K2L + EVM using CCS", but using address 0x87000000. 4. Free Run the target as described earlier (step 4) to get u-boot prompt 5. At the U-Boot console type following to setup u-boot environment variables. setenv addr_uboot 0x87000000 diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c index 4029493..ff7bc4b 100644 --- a/board/ti/ks2_evm/board.c +++ b/board/ti/ks2_evm/board.c @@ -122,7 +122,6 @@ void ft_board_setup(void *blob, bd_t *bd) int nbanks; u64 size[2]; u64 start[2]; - char name[32]; int nodeoffset; u32 ddr3a_size; int unitrd_fixup = 0; @@ -158,15 +157,13 @@ void ft_board_setup(void *blob, bd_t *bd) } /* reserve memory at start of bank */ - sprintf(name, "mem_reserve_head"); - env = getenv(name); + env = getenv("mem_reserve_head"); if (env) { start[0] += ustrtoul(env, &endp, 0); size[0] -= ustrtoul(env, &endp, 0); } - sprintf(name, "mem_reserve"); - env = getenv(name); + env = getenv("mem_reserve"); if (env) size[0] -= ustrtoul(env, &endp, 0); diff --git a/board/ti/ks2_evm/board_k2l.c b/board/ti/ks2_evm/board_k2l.c index 559d20c..729a193 100644 --- a/board/ti/ks2_evm/board_k2l.c +++ b/board/ti/ks2_evm/board_k2l.c @@ -10,7 +10,7 @@ #include <common.h> #include <asm/arch/ddr3.h> #include <asm/arch/hardware.h> -#include <asm/ti-common/ti-aemif.h> +#include <asm/ti-common/keystone_net.h> DECLARE_GLOBAL_DATA_PTR; @@ -42,6 +42,44 @@ static struct pll_init_data tetris_pll_config[] = { static struct pll_init_data pa_pll_config = PASS_PLL_983; +#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET +struct eth_priv_t eth_priv_cfg[] = { + { + .int_name = "K2L_EMAC", + .rx_flow = 0, + .phy_addr = 0, + .slave_port = 1, + .sgmii_link_type = SGMII_LINK_MAC_PHY, + }, + { + .int_name = "K2L_EMAC1", + .rx_flow = 8, + .phy_addr = 1, + .slave_port = 2, + .sgmii_link_type = SGMII_LINK_MAC_PHY, + }, + { + .int_name = "K2L_EMAC2", + .rx_flow = 16, + .phy_addr = 2, + .slave_port = 3, + .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED, + }, + { + .int_name = "K2L_EMAC3", + .rx_flow = 32, + .phy_addr = 3, + .slave_port = 4, + .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED, + }, +}; + +int get_num_eth_ports(void) +{ + return sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t); +} +#endif + #ifdef CONFIG_BOARD_EARLY_INIT_F int board_early_init_f(void) { diff --git a/configs/am335x_evm_nor_defconfig b/configs/am335x_evm_nor_defconfig index 41f31cc..be90163 100644 --- a/configs/am335x_evm_nor_defconfig +++ b/configs/am335x_evm_nor_defconfig @@ -1,5 +1,6 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="NAND,NOR" +CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_CONS_INDEX=1 +S:CONFIG_ARM=y +S:CONFIG_TARGET_AM335X_EVM=y +CONFIG_NOR=y diff --git a/configs/am335x_evm_norboot_defconfig b/configs/am335x_evm_norboot_defconfig index 7dbfa27..47ff6cd 100644 --- a/configs/am335x_evm_norboot_defconfig +++ b/configs/am335x_evm_norboot_defconfig @@ -1,4 +1,5 @@ -CONFIG_SYS_EXTRA_OPTIONS="NOR,NOR_BOOT" CONFIG_CONS_INDEX=1 CONFIG_ARM=y CONFIG_TARGET_AM335X_EVM=y +CONFIG_NOR=y +CONFIG_NOR_BOOT=y diff --git a/configs/cm_t3517_defconfig b/configs/cm_t3517_defconfig new file mode 100644 index 0000000..4000d2c --- /dev/null +++ b/configs/cm_t3517_defconfig @@ -0,0 +1,4 @@ +CONFIG_SPL=n ++S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y ++S:CONFIG_TARGET_CM_T3517=y diff --git a/drivers/dma/keystone_nav.c b/drivers/dma/keystone_nav.c index 77707c2..dfca75a 100644 --- a/drivers/dma/keystone_nav.c +++ b/drivers/dma/keystone_nav.c @@ -81,9 +81,6 @@ void qm_close(void) { u32 j; - if (qm_cfg == NULL) - return; - queue_close(qm_cfg->qpool_num); qm_cfg->mngr_cfg->link_ram_base0 = 0; @@ -105,9 +102,6 @@ void qm_push(struct qm_host_desc *hd, u32 qnum) { u32 regd; - if (!qm_cfg) - return; - cpu_to_bus((u32 *)hd, sizeof(struct qm_host_desc)/4); regd = (u32)hd | ((sizeof(struct qm_host_desc) >> 4) - 1); writel(regd, &qm_cfg->queue[qnum].ptr_size_thresh); @@ -127,9 +121,6 @@ struct qm_host_desc *qm_pop(u32 qnum) { u32 uhd; - if (!qm_cfg) - return NULL; - uhd = readl(&qm_cfg->queue[qnum].ptr_size_thresh) & ~0xf; if (uhd) cpu_to_bus((u32 *)uhd, sizeof(struct qm_host_desc)/4); @@ -139,9 +130,6 @@ struct qm_host_desc *qm_pop(u32 qnum) struct qm_host_desc *qm_pop_from_free_pool(void) { - if (!qm_cfg) - return NULL; - return qm_pop(qm_cfg->qpool_num); } diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index ef2cbf9..ffb5284 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -611,7 +611,8 @@ static int omap_hsmmc_getcd(struct mmc *mmc) if (cd_gpio < 0) return 1; - return gpio_get_value(cd_gpio); + /* NOTE: assumes card detect signal is active-low */ + return !gpio_get_value(cd_gpio); } static int omap_hsmmc_getwp(struct mmc *mmc) @@ -624,6 +625,7 @@ static int omap_hsmmc_getwp(struct mmc *mmc) if (wp_gpio < 0) return 0; + /* NOTE: assumes write protect signal is active-high */ return gpio_get_value(wp_gpio); } #endif diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c index c8681d0..bedab1d 100644 --- a/drivers/net/keystone_net.c +++ b/drivers/net/keystone_net.c @@ -315,7 +315,7 @@ int mac_sl_config(u_int16_t port, struct mac_sl_cfg *cfg) writel(cfg->max_rx_len, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_MAXLEN); writel(cfg->ctl, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_CTL); -#ifdef CONFIG_K2E_EVM +#if defined(CONFIG_SOC_K2E) || defined(CONFIG_SOC_K2L) /* Map RX packet flow priority to 0 */ writel(0, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RX_PRI_MAP); #endif @@ -400,6 +400,9 @@ static int keystone2_eth_open(struct eth_device *dev, bd_t *bis) keystone2_net_serdes_setup(); + if (sys_has_mdio) + keystone2_mdio_reset(mdio_bus); + keystone_sgmii_config(phy_dev, eth_priv->slave_port - 1, eth_priv->sgmii_link_type); @@ -582,7 +585,7 @@ static void keystone2_net_serdes_setup(void) &ks2_serdes_sgmii_156p25mhz, CONFIG_KSNET_SERDES_LANES_PER_SGMII); -#ifdef CONFIG_SOC_K2E +#if defined(CONFIG_SOC_K2E) || defined(CONFIG_SOC_K2L) ks2_serdes_init(CONFIG_KSNET_SERDES_SGMII2_BASE, &ks2_serdes_sgmii_156p25mhz, CONFIG_KSNET_SERDES_LANES_PER_SGMII); diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index d2ecadc..9437c3b 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -276,6 +276,57 @@ static int m88e1111s_config(struct phy_device *phydev) return 0; } +/** + * m88e1518_phy_writebits - write bits to a register + */ +void m88e1518_phy_writebits(struct phy_device *phydev, + u8 reg_num, u16 offset, u16 len, u16 data) +{ + u16 reg, mask; + + if ((len + offset) >= 16) + mask = 0 - (1 << offset); + else + mask = (1 << (len + offset)) - (1 << offset); + + reg = phy_read(phydev, MDIO_DEVAD_NONE, reg_num); + + reg &= ~mask; + reg |= data << offset; + + phy_write(phydev, MDIO_DEVAD_NONE, reg_num, reg); +} + +static int m88e1518_config(struct phy_device *phydev) +{ + /* + * As per Marvell Release Notes - Alaska 88E1510/88E1518/88E1512 + * /88E1514 Rev A0, Errata Section 3.1 + */ + if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { + phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x00ff); /* page 0xff */ + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x214B); + phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2144); + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x0C28); + phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2146); + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xB233); + phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x214D); + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xCC0C); + phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2159); + phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x0000); /* reg page 0 */ + phy_write(phydev, MDIO_DEVAD_NONE, 22, 18); /* reg page 18 */ + /* Write HWCFG_MODE = SGMII to Copper */ + m88e1518_phy_writebits(phydev, 20, 0, 3, 1); + + /* Phy reset */ + m88e1518_phy_writebits(phydev, 20, 15, 1, 1); + phy_write(phydev, MDIO_DEVAD_NONE, 22, 0); /* reg page 18 */ + udelay(100); + } + + return m88e1111s_config(phydev); +} + /* Marvell 88E1118 */ static int m88e1118_config(struct phy_device *phydev) { @@ -493,7 +544,7 @@ static struct phy_driver M88E1518_driver = { .uid = 0x1410dd1, .mask = 0xffffff0, .features = PHY_GBIT_FEATURES, - .config = &m88e1111s_config, + .config = &m88e1518_config, .startup = &m88e1011s_startup, .shutdown = &genphy_shutdown, }; diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 1ec783d..560e3bf 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -314,6 +314,18 @@ #define CONFIG_AM335X_USB1 #define CONFIG_AM335X_USB1_MODE MUSB_HOST +#ifndef CONFIG_SPL_USBETH_SUPPORT +/* Fastboot */ +#define CONFIG_CMD_FASTBOOT +#define CONFIG_ANDROID_BOOT_IMAGE +#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 + +/* To support eMMC booting */ +#define CONFIG_STORAGE_EMMC +#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 +#endif + #ifdef CONFIG_MUSB_HOST #define CONFIG_CMD_USB #define CONFIG_USB_STORAGE @@ -325,8 +337,8 @@ #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" /* USB TI's IDs */ -#define CONFIG_G_DNL_VENDOR_NUM 0x0403 -#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 +#define CONFIG_G_DNL_VENDOR_NUM 0x0451 +#define CONFIG_G_DNL_PRODUCT_NUM 0xD022 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" #endif /* CONFIG_MUSB_GADGET */ diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h new file mode 100644 index 0000000..918032b --- /dev/null +++ b/include/configs/cm_t3517.h @@ -0,0 +1,320 @@ +/* + * (C) Copyright 2013 CompuLab, Ltd. + * Author: Igor Grinberg <grinberg@compulab.co.il> + * + * Configuration settings for the CompuLab CM-T3517 board + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_OMAP /* in a TI OMAP core */ +#define CONFIG_CM_T3517 /* working with CM-T3517 */ +#define CONFIG_OMAP_COMMON +#define CONFIG_SYS_GENERIC_BOARD + +#define CONFIG_SYS_TEXT_BASE 0x80008000 + +/* + * This is needed for the DMA stuff. + * Although the default iss 64, we still define it + * to be on the safe side once the default is changed. + */ +#define CONFIG_SYS_CACHELINE_SIZE 64 + +#define CONFIG_EMIF4 /* The chip has EMIF4 controller */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#define CONFIG_MISC_INIT_R + +#define CONFIG_OF_LIBFDT +/* + * The early kernel mapping on ARM currently only maps from the base of DRAM + * to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000. + * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000, + * so that leaves DRAM base to DRAM base + 0x4000 available. + */ +#define CONFIG_SYS_BOOTMAPSZ 0x4000 + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_SERIAL_TAG + +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 /* UART3 */ +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} + +#define CONFIG_OMAP_GPIO + +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_DOS_PARTITION + +/* USB */ +#define CONFIG_USB_MUSB_AM35X + +#ifndef CONFIG_USB_MUSB_AM35X +#define CONFIG_USB_OMAP3 +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_OMAP +#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146 +#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147 +#else /* !CONFIG_USB_MUSB_AM35X */ +#define CONFIG_MUSB_HOST +#define CONFIG_MUSB_PIO_ONLY +#endif /* CONFIG_USB_MUSB_AM35X */ + +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_USB + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_MTD_PARTITIONS +#define MTDIDS_DEFAULT "nand0=nand" +#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ + "1920k(u-boot),256k(u-boot-env),"\ + "4m(kernel),-(fs)" + +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_GPIO + +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMLS /* List all found images */ + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 400000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_BUS 0 +#define CONFIG_I2C_MULTI_BUS + +/* + * Board NAND Info. + */ +#define CONFIG_SYS_NAND_QUIET_TEST +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access nand at */ + /* CS0 */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ + /* devices */ + +/* Environment information */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "baudrate=115200\0" \ + "console=ttyO2,115200n8\0" \ + "mpurate=auto\0" \ + "vram=12M\0" \ + "dvimode=1024x768MR-16@60\0" \ + "defaultdisplay=dvi\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \ + "mmcrootfstype=ext4\0" \ + "nandroot=/dev/mtdblock4 rw\0" \ + "nandrootfstype=ubifs\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "nandargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} 2a0000 400000; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_CMD_BOOTZ +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi" + +/* + * Miscellaneous configurable options + */ +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_TIMESTAMP +#define CONFIG_SYS_AUTOLOAD "no" +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT "CM-T3517 # " +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000) + +/* + * AM3517 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* CM-T3517 DRAM is only on CS0 */ +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define CONFIG_SYS_CS0_SIZE (256 << 20) + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT *** */ +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ + +#define CONFIG_ENV_IS_IN_NAND +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET +#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET + +#if defined(CONFIG_CMD_NET) +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_DRIVER_TI_EMAC_USE_RMII +#define CONFIG_MII +#define CONFIG_SMC911X +#define CONFIG_SMC911X_32_BIT +#define CONFIG_SMC911X_BASE (0x2C000000 + (16 << 20)) +#endif /* CONFIG_CMD_NET */ + +/* additions for new relocation code, must be added to all boards */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +/* Status LED */ +#define CONFIG_STATUS_LED /* Status LED enabled */ +#define CONFIG_BOARD_SPECIFIC_LED +#define CONFIG_GPIO_LED +#define GREEN_LED_GPIO 186 /* CM-T3517 Green LED is GPIO186 */ +#define GREEN_LED_DEV 0 +#define STATUS_LED_BIT GREEN_LED_GPIO +#define STATUS_LED_STATE STATUS_LED_ON +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BOOT GREEN_LED_DEV + +/* GPIO banks */ +#ifdef CONFIG_STATUS_LED +#define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */ +#endif + +/* Display Configuration */ +#define CONFIG_OMAP3_GPIO_2 +#define CONFIG_OMAP3_GPIO_5 +#define CONFIG_VIDEO_OMAP3 +#define LCD_BPP LCD_COLOR16 + +#define CONFIG_LCD +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASHIMAGE_GUARD +#define CONFIG_CMD_BMP +#define CONFIG_BMP_16BPP +#define CONFIG_SCF0403_LCD + +#define CONFIG_OMAP3_SPI + +#endif /* __CONFIG_H */ diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h index 7c8065a..d83e07e 100644 --- a/include/configs/k2e_evm.h +++ b/include/configs/k2e_evm.h @@ -17,14 +17,15 @@ /* U-Boot general configuration */ #define CONFIG_SYS_PROMPT "K2E EVM # " -#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\ - "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" - -#define KS2_FDT_NAME "name_fdt=k2e-evm.dtb\0" -#define KS2_ADDR_MON "addr_mon=0x0c140000\0" -#define KS2_NAME_MON "name_mon=skern-k2e-evm.bin\0" -#define NAME_UBOOT "name_uboot=u-boot-spi-k2e-evm.gph\0" -#define NAME_UBI "name_ubi=k2e-evm-ubifs.ubi\0" +#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ + "addr_mon=0x0c140000\0" \ + "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ + "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" \ + "name_fdt=uImage-k2e-evm.dtb\0" \ + "name_mon=skern-k2e-evm.bin\0" \ + "name_ubi=k2e-evm-ubifs.ubi\0" \ + "name_uboot=u-boot-spi-k2e-evm.gph\0" \ + "name_fs=arago-console-image-k2e-evm.cpio.gz\0" #include <configs/ks2_evm.h> @@ -35,14 +36,8 @@ #define CONFIG_SYS_NAND_PAGE_2K /* Network */ -#define CONFIG_DRIVER_TI_KEYSTONE_NET -#define CONFIG_TI_KSNAV -#define CONFIG_KSNAV_PKTDMA_NETCP #define CONFIG_KSNET_NETCP_V1_5 #define CONFIG_KSNET_CPSW_NUM_PORTS 9 #define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE -/* SerDes */ -#define CONFIG_TI_KEYSTONE_SERDES - #endif /* __CONFIG_K2E_EVM_H */ diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index 034cbfd..ffddf13 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -17,14 +17,15 @@ /* U-Boot general configuration */ #define CONFIG_SYS_PROMPT "K2HK EVM # " -#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\ - "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" - -#define KS2_FDT_NAME "name_fdt=k2hk-evm.dtb\0" -#define KS2_ADDR_MON "addr_mon=0x0c5f0000\0" -#define KS2_NAME_MON "name_mon=skern-k2hk-evm.bin\0" -#define NAME_UBOOT "name_uboot=u-boot-spi-k2hk-evm.gph\0" -#define NAME_UBI "name_ubi=k2hk-evm-ubifs.ubi\0" +#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ + "addr_mon=0x0c5f0000\0" \ + "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ + "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" \ + "name_fdt=uImage-k2hk-evm.dtb\0" \ + "name_mon=skern-k2hk-evm.bin\0" \ + "name_ubi=k2hk-evm-ubifs.ubi\0" \ + "name_uboot=u-boot-spi-k2hk-evm.gph\0" \ + "name_fs=arago-console-image-k2hk-evm.cpio.gz\0" #include <configs/ks2_evm.h> @@ -35,13 +36,7 @@ #define CONFIG_SYS_NAND_PAGE_2K /* Network */ -#define CONFIG_DRIVER_TI_KEYSTONE_NET -#define CONFIG_TI_KSNAV -#define CONFIG_KSNAV_PKTDMA_NETCP #define CONFIG_KSNET_NETCP_V1_0 #define CONFIG_KSNET_CPSW_NUM_PORTS 5 -/* SerDes */ -#define CONFIG_TI_KEYSTONE_SERDES - #endif /* __CONFIG_K2HK_EVM_H */ diff --git a/include/configs/k2l_evm.h b/include/configs/k2l_evm.h index 0e1f725..805164a 100644 --- a/include/configs/k2l_evm.h +++ b/include/configs/k2l_evm.h @@ -17,14 +17,15 @@ /* U-Boot general configuration */ #define CONFIG_SYS_PROMPT "K2L EVM # " -#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\ - "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,4096\0" - -#define KS2_FDT_NAME "name_fdt=k2l-evm.dtb\0" -#define KS2_ADDR_MON "addr_mon=0x0c140000\0" -#define KS2_NAME_MON "name_mon=skern-k2l-evm.bin\0" -#define NAME_UBOOT "name_uboot=u-boot-spi-k2l-evm.gph\0" -#define NAME_UBI "name_ubi=k2l-evm-ubifs.ubi\0" +#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ + "addr_mon=0x0c140000\0" \ + "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ + "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,4096\0" \ + "name_fdt=uImage-k2l-evm.dtb\0" \ + "name_mon=skern-k2l-evm.bin\0" \ + "name_ubi=k2l-evm-ubifs.ubi\0" \ + "name_uboot=u-boot-spi-k2l-evm.gph\0" \ + "name_fs=arago-console-image-k2l-evm.cpio.gz\0" #include <configs/ks2_evm.h> @@ -34,4 +35,9 @@ /* NAND Configuration */ #define CONFIG_SYS_NAND_PAGE_4K +/* Network */ +#define CONFIG_KSNET_NETCP_V1_5 +#define CONFIG_KSNET_CPSW_NUM_PORTS 5 +#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE + #endif /* __CONFIG_K2L_EVM_H */ diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h index b0c91d8..dd5050f 100644 --- a/include/configs/ks2_evm.h +++ b/include/configs/ks2_evm.h @@ -105,6 +105,7 @@ #define CONFIG_SYS_SGMII_RATESCALE 2 /* Keyston Navigator Configuration */ +#define CONFIG_TI_KSNAV #define CONFIG_KSNAV_QM_BASE_ADDRESS KS2_QM_BASE_ADDRESS #define CONFIG_KSNAV_QM_CONF_BASE KS2_QM_CONF_BASE #define CONFIG_KSNAV_QM_DESC_SETUP_BASE KS2_QM_DESC_SETUP_BASE @@ -121,6 +122,7 @@ #define CONFIG_KSNAV_QM_QPOOL_NUM KS2_QM_QPOOL_NUM /* NETCP pktdma */ +#define CONFIG_KSNAV_PKTDMA_NETCP #define CONFIG_KSNAV_NETCP_PDMA_CTRL_BASE KS2_NETCP_PDMA_CTRL_BASE #define CONFIG_KSNAV_NETCP_PDMA_TX_BASE KS2_NETCP_PDMA_TX_BASE #define CONFIG_KSNAV_NETCP_PDMA_TX_CH_NUM KS2_NETCP_PDMA_TX_CH_NUM @@ -134,12 +136,16 @@ #define CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE KS2_NETCP_PDMA_TX_SND_QUEUE /* Keystone net */ +#define CONFIG_DRIVER_TI_KEYSTONE_NET #define CONFIG_KSNET_MAC_ID_BASE KS2_MAC_ID_BASE_ADDR #define CONFIG_KSNET_NETCP_BASE KS2_NETCP_BASE #define CONFIG_KSNET_SERDES_SGMII_BASE KS2_SGMII_SERDES_BASE #define CONFIG_KSNET_SERDES_SGMII2_BASE KS2_SGMII_SERDES2_BASE #define CONFIG_KSNET_SERDES_LANES_PER_SGMII KS2_LANES_PER_SGMII_SERDES +/* SerDes */ +#define CONFIG_TI_KEYSTONE_SERDES + /* AEMIF */ #define CONFIG_TI_AEMIF #define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE @@ -218,6 +224,8 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_EEPROM #define CONFIG_CMD_USB +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC /* U-Boot general configuration */ #define CONFIG_SYS_GENERIC_BOARD @@ -239,30 +247,25 @@ #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" #define CONFIG_EXTRA_ENV_SETTINGS \ - "boot=ramfs\0" \ + CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ + "boot=ubi\0" \ "tftp_root=/\0" \ "nfs_root=/export\0" \ "mem_lpae=1\0" \ "mem_reserve=512M\0" \ "addr_fdt=0x87000000\0" \ "addr_kern=0x88000000\0" \ - KS2_ADDR_MON \ "addr_uboot=0x87000000\0" \ "addr_fs=0x82000000\0" \ "addr_ubi=0x82000000\0" \ "addr_secdb_key=0xc000000\0" \ "fdt_high=0xffffffff\0" \ - KS2_FDT_NAME \ - "name_fs=arago-console-image.cpio.gz\0" \ - "name_kern=uImage\0" \ - KS2_NAME_MON \ - NAME_UBOOT \ - NAME_UBI \ + "name_kern=uImage-keystone-evm.bin\0" \ "run_mon=mon_install ${addr_mon}\0" \ "run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \ "init_net=run args_all args_net\0" \ "init_ubi=run args_all args_ubi; " \ - "ubi part ubifs; ubifsmount boot;" \ + "ubi part ubifs; ubifsmount ubi:boot;" \ "ubifsload ${addr_secdb_key} securedb.key.bin;\0" \ "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \ "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \ @@ -276,7 +279,6 @@ "burn_uboot_nand=nand erase 0 0x100000; " \ "nand write ${addr_uboot} 0 ${filesize}\0" \ "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \ - KS2_ARGS_UBI \ "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \ "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \ "${nfs_options} ip=dhcp\0" \ diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 006c9a9..b2b3750 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -29,8 +29,6 @@ #define CONFIG_REVISION_TAG 1 -#define CONFIG_SUPPORT_RAW_INITRD - /* define to enable boot progress via leds */ #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 4b9b629..a8790c2 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -174,6 +174,7 @@ #define CONFIG_CMD_ASKENV #define CONFIG_CMD_ECHO #define CONFIG_CMD_BOOTZ +#define CONFIG_SUPPORT_RAW_INITRD /* * Common filesystems support. When we have removable storage we diff --git a/include/twl4030.h b/include/twl4030.h index 18795a6..f33cd1e 100644 --- a/include/twl4030.h +++ b/include/twl4030.h @@ -390,6 +390,8 @@ /* Voltage Selection in PM Receiver Module */ #define TWL4030_PM_RECEIVER_VAUX2_VSEL_18 0x05 +#define TWL4030_PM_RECEIVER_VAUX2_VSEL_28 0x09 +#define TWL4030_PM_RECEIVER_VAUX3_VSEL_18 0x01 #define TWL4030_PM_RECEIVER_VAUX3_VSEL_28 0x03 #define TWL4030_PM_RECEIVER_VPLL2_VSEL_18 0x05 #define TWL4030_PM_RECEIVER_VDAC_VSEL_18 0x03 |