MLK-12436-12: mx6slevk: update board code

Add elan code, to handle epdc which has i2c devices.

In imx_v2015.04, the two pathces are for elan.
b6ba68516b681a38025252bd0ef6a6ed3e8adfa0
MLK-10215 Add elan init in i.MX6SL-EVK board
0c600f6a67f00fe0c674c08c355bea3789109679
MLK-10885 imx: mx6slevk ignore elan init when no epdc on board

Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit cb249aa1d57788c52145d28f2e2c68cb320d8ae3)
Signed-off-by: Ye Li <ye.li@nxp.com>

2 files changed, 101 insertions, 6 deletions

diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
index a40c1be..1e2f67b 100644
--- a/board/freescale/mx6slevk/mx6slevk.c
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -60,6 +60,10 @@ DECLARE_GLOBAL_DATA_PTR;
 			PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW |\
 			PAD_CTL_DSE_80ohm | PAD_CTL_HYS |	\
 			PAD_CTL_SRE_FAST)
+
+#define ELAN_INTR_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+			    PAD_CTL_PUS_47K_UP | PAD_CTL_HYS)
+
 #define EPDC_PAD_CTRL    (PAD_CTL_PKE | PAD_CTL_SPEED_MED |	\
 	PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
 
@@ -132,6 +136,12 @@ static iomux_v3_cfg_t const fec_pads[] = {
 	MX6_PAD_FEC_TX_CLK__GPIO_4_21 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 
+static iomux_v3_cfg_t const elan_pads[] = {
+	MX6_PAD_EPDC_PWRCTRL2__GPIO_2_9 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	MX6_PAD_EPDC_PWRCTRL3__GPIO_2_10 | MUX_PAD_CTRL(ELAN_INTR_PAD_CTRL),
+	MX6_PAD_KEY_COL6__GPIO_4_4 | MUX_PAD_CTRL(EPDC_PAD_CTRL),
+};
+
 #ifdef CONFIG_MXC_SPI
 static iomux_v3_cfg_t ecspi1_pads[] = {
 	MX6_PAD_ECSPI1_MISO__ECSPI_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
@@ -351,14 +361,45 @@ struct i2c_pads_info i2c_pad_info1 = {
 
 int power_init_board(void)
 {
-	struct pmic *p;
+	struct pmic *pfuze;
+	unsigned int reg;
+	int ret;
 
-	p = pfuze_common_init(I2C_PMIC);
-	if (!p)
+	pfuze = pfuze_common_init(I2C_PMIC);
+	if (!pfuze)
 		return -ENODEV;
 
-	return pfuze_mode_init(p, APS_PFM);
+	ret = pfuze_mode_init(pfuze, APS_PFM);
+	if (ret < 0)
+		return ret;
+
+	/* set SW1AB staby volatage 0.975V */
+	pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, &reg);
+	reg &= ~0x3f;
+	reg |= 0x1b;
+	pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg);
+
+	/* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+	pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, &reg);
+	reg &= ~0xc0;
+	reg |= 0x40;
+	pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg);
+
+	/* set SW1C staby volatage 0.975V */
+	pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, &reg);
+	reg &= ~0x3f;
+	reg |= 0x1b;
+	pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg);
+
+	/* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+	pmic_reg_read(pfuze, PFUZE100_SW1CCONF, &reg);
+	reg &= ~0xc0;
+	reg |= 0x40;
+	pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg);
+
+	return 0;
 }
+
 #endif
 
 #ifdef CONFIG_FEC_MXC
@@ -603,6 +644,17 @@ void epdc_power_off(void)
 }
 #endif
 
+void setup_elan_pads(void)
+{
+#define TOUCH_CS	IMX_GPIO_NR(2, 9)
+#define TOUCH_INT   IMX_GPIO_NR(2, 10)
+#define TOUCH_RST	IMX_GPIO_NR(4, 4)
+	imx_iomux_v3_setup_multiple_pads(elan_pads, ARRAY_SIZE(elan_pads));
+	gpio_request(TOUCH_CS, "TOUCH CS");
+	gpio_request(TOUCH_INT, "TOUCH Interrupt");
+	gpio_request(TOUCH_RST, "TOUCH Reset");
+}
+
 int board_init(void)
 {
 	/* address of boot parameters */
@@ -610,6 +662,7 @@ int board_init(void)
 
 #ifdef CONFIG_SYS_I2C_MXC
 	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+	setup_elan_pads();
 #endif
 
 #ifdef	CONFIG_FEC_MXC
@@ -627,6 +680,37 @@ int board_init(void)
 	return 0;
 }
 
+void elan_init(void)
+{
+	gpio_direction_input(TOUCH_INT);
+	/*
+	 * If epdc panel not plugged in, gpio_get_value(TOUCH_INT) will
+	 * return 1. And no need to mdelay, which will make i2c operation
+	 * slow.
+	 * If epdc panel plugged in, gpio_get_value(TOUCH_INT) will
+	 * return 0. And elan init flow will be executed.
+	 */
+	if (gpio_get_value(TOUCH_INT))
+		return;
+	gpio_direction_output(TOUCH_CS , 1);
+	gpio_set_value(TOUCH_CS, 0);
+	gpio_direction_output(TOUCH_RST , 1);
+	gpio_set_value(TOUCH_RST, 0);
+	mdelay(10);
+	gpio_set_value(TOUCH_RST, 1);
+	gpio_set_value(TOUCH_CS, 1);
+	mdelay(100);
+}
+
+/*
+ * This function overwrite the function defined in
+ * drivers/i2c/mxc_i2c.c, which is a weak symbol
+ */
+void i2c_force_reset_slave(void)
+{
+	elan_init();
+}
+
 int board_late_init(void)
 {
 #ifdef CONFIG_ENV_IS_IN_MMC
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index d9ae9a4..2a7102d 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -25,6 +25,9 @@
 
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
+#define CONFIG_SYS_FSL_USDHC_NUM	3
+#define CONFIG_SYS_MMC_ENV_DEV		1	/* SDHC2*/
+#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
 
 /* I2C Configs */
 #define CONFIG_SYS_I2C
@@ -44,6 +47,7 @@
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RMII
+#define CONFIG_ETHPRIME			"FEC"
 #define CONFIG_FEC_MXC_PHYADDR		0
 
 #define CONFIG_PHYLIB
@@ -73,9 +77,9 @@
 	"fdt_addr=0x83000000\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
-	"mmcdev=1\0" \
+	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
 	"mmcpart=1\0" \
-	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 	"mmcautodetect=yes\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
@@ -159,6 +163,9 @@
 
 /* Environment organization */
 #define CONFIG_ENV_SIZE			SZ_8K
+#define CONFIG_SYS_MMC_ENV_DEV		1   /* USDHC2 */
+#define CONFIG_SYS_MMC_ENV_PART		0	/* user partition */
+#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
 
 #if defined CONFIG_SYS_BOOT_SPINOR
 #define CONFIG_ENV_IS_IN_SPI_FLASH
@@ -173,6 +180,10 @@
 #define CONFIG_ENV_IS_IN_MMC
 #endif
 
+#ifndef CONFIG_SYS_DCACHE_OFF
+#define CONFIG_CMD_CACHE
+#endif
+
 #ifdef CONFIG_CMD_SF
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS		0