Merge branch 'master' of git://git.denx.de/u-boot-arm

30 files changed, 1474 insertions, 618 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 0041112..376a0a9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -547,6 +547,10 @@ Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
 
 	meesc		ARM926EJS (AT91SAM9263 SoC)
 
+Sedji Gaouaou<sedji.gaouaou@atmel.com>
+	at91sam9g10ek		ARM926EJS (AT91SAM9G10 SoC)	
+	at91sam9m10g45ek	ARM926EJS (AT91SAM9G45 SoC)
+
 Marius Gröger <mag@sysgo.de>
 
 	impa7		ARM720T (EP7211)
diff --git a/MAKEALL b/MAKEALL
index 2b42352..4163080 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -578,24 +578,26 @@ LIST_ARM_CORTEX_A8="		\
 ## AT91 Systems
 #########################################################################
 
-LIST_at91="		\
-	afeb9260	\
-	at91cap9adk	\
-	at91rm9200dk	\
-	at91rm9200ek	\
-	at91sam9260ek	\
-	at91sam9261ek	\
-	at91sam9263ek	\
-	at91sam9g20ek	\
-	at91sam9rlek	\
-	cmc_pu2		\
-	csb637		\
-	kb9202		\
-	meesc		\
-	mp2usb		\
-	m501sk		\
-	pm9261		\
-	pm9263		\
+LIST_at91="			\
+	afeb9260		\
+	at91cap9adk		\
+	at91rm9200dk		\
+	at91rm9200ek		\
+	at91sam9260ek		\
+	at91sam9261ek		\
+	at91sam9263ek		\
+	at91sam9g10ek	\
+	at91sam9g20ek		\
+	at91sam9m10g45ek	\
+	at91sam9rlek		\
+	cmc_pu2			\
+	csb637			\
+	kb9202			\
+	meesc			\
+	mp2usb			\
+	m501sk			\
+	pm9261			\
+	pm9263			\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index 0d607ca..015368c 100644
--- a/Makefile
+++ b/Makefile
@@ -2743,12 +2743,22 @@ at91sam9xeek_config	:	unconfig
 at91sam9261ek_nandflash_config \
 at91sam9261ek_dataflash_cs0_config \
 at91sam9261ek_dataflash_cs3_config \
-at91sam9261ek_config	:	unconfig
-	@mkdir -p $(obj)include
+at91sam9261ek_config \
+at91sam9g10ek_nandflash_config \
+at91sam9g10ek_dataflash_cs0_config \
+at91sam9g10ek_dataflash_cs3_config \
+at91sam9g10ek_config	:	unconfig
+	@mkdir -p $(obj)include
+	@if [ "$(findstring 9g10,$@)" ] ; then \
+		echo "#define CONFIG_AT91SAM9G10EK 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... 9G10 Variant" ; \
+	else \
+		echo "#define CONFIG_AT91SAM9261EK 1"	>>$(obj)include/config.h ; \
+	fi;
 	@if [ "$(findstring _nandflash,$@)" ] ; then \
 		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
 		$(XECHO) "... with environment variable in NAND FLASH" ; \
-	elif [ "$(findstring dataflash_cs3,$@)" ] ; then \
+	elif [ "$(findstring dataflash_cs0,$@)" ] ; then \
 		echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1"	>>$(obj)include/config.h ; \
 		$(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \
 	else \
@@ -2800,6 +2810,31 @@ meesc_config	:	unconfig
 pm9261_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91
 
+at91sam9m10g45ek_nandflash_config \
+at91sam9m10g45ek_dataflash_config \
+at91sam9m10g45ek_dataflash_cs0_config \
+at91sam9m10g45ek_config \
+at91sam9g45ekes_nandflash_config \
+at91sam9g45ekes_dataflash_config \
+at91sam9g45ekes_dataflash_cs0_config \
+at91sam9g45ekes_config	:	unconfig
+	@mkdir -p $(obj)include
+		@if [ "$(findstring 9m10,$@)" ] ; then \
+		echo "#define CONFIG_AT91SAM9M10G45EK 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... 9M10G45 Variant" ; \
+	else \
+		echo "#define CONFIG_AT91SAM9G45EKES 1"	>>$(obj)include/config.h ; \
+	fi;
+
+	@if [ "$(findstring _nandflash,$@)" ] ; then \
+		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in NAND FLASH" ; \
+	else \
+		echo "#define CONFIG_ATMEL_SPI 1"	>>$(obj)include/config.h ; \
+		$(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \
+	fi;
+	@$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
+
 pm9263_config	:	unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
 
diff --git a/board/armltd/versatile/Makefile b/board/armltd/versatile/Makefile
index 044a429..80a2c7e 100644
--- a/board/armltd/versatile/Makefile
+++ b/board/armltd/versatile/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= versatile.o flash.o
+COBJS	:= versatile.o
 SOBJS	:= lowlevel_init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/armltd/versatile/flash.c b/board/armltd/versatile/flash.c
deleted file mode 100644
index 3bdc895..0000000
--- a/board/armltd/versatile/flash.c
+++ /dev/null
@@ -1,514 +0,0 @@
-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-
-#define PHYS_FLASH_SECT_SIZE	0x00020000	/* 256 KB sectors (x2) */
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
-
-/* Board support for 1 or 2 flash devices */
-#define FLASH_PORT_WIDTH32
-#undef FLASH_PORT_WIDTH16
-
-#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH		ushort
-#define FLASH_PORT_WIDTHV		vu_short
-#define SWAP(x)			__swab16(x)
-#else
-#define FLASH_PORT_WIDTH		ulong
-#define FLASH_PORT_WIDTHV		vu_long
-#define SWAP(x)			__swab32(x)
-#endif
-
-#define FPW	FLASH_PORT_WIDTH
-#define FPWV	FLASH_PORT_WIDTHV
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-
-/* Flash Organization Structure */
-typedef struct OrgDef {
-	unsigned int sector_number;
-	unsigned int sector_size;
-} OrgDef;
-
-
-/* Flash Organizations */
-OrgDef OrgIntel_28F256K3[] = {
-	{256, 128 * 1024},		/* 256 * 128kBytes sectors */
-};
-
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-unsigned long flash_init (void);
-static ulong flash_get_size (FPW * addr, flash_info_t * info);
-static int write_data (flash_info_t * info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-void inline spin_wheel (void);
-void flash_print_info (flash_info_t * info);
-void flash_unprotect_sectors (FPWV * addr);
-int flash_erase (flash_info_t * info, int s_first, int s_last);
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
-
-/*-----------------------------------------------------------------------
- */
-
-static void flash_vpp(int on)
-{
-	unsigned int tmp;
-
-	tmp = *(unsigned int *)(VERSATILE_FLASHCTRL);
-
-	if (on)
-	    tmp |= VERSATILE_FLASHPROG_FLVPPEN;
-	else
-	    tmp &= ~VERSATILE_FLASHPROG_FLVPPEN;
-
-	*(unsigned int *)(VERSATILE_FLASHCTRL) = tmp;
-}
-
-unsigned long flash_init (void)
-{
-	int i;
-	ulong size = 0;
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		switch (i) {
-		case 0:
-		        flash_vpp(1);
-			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
-			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
-			flash_vpp(0);
-			break;
-		default:
-			panic ("configured too many flash banks!\n");
-			break;
-		}
-		size += flash_info[i].size;
-	}
-
-	/* Protect monitor and environment sectors
-	 */
-	flash_protect (FLAG_PROTECT_SET,
-			CONFIG_SYS_FLASH_BASE,
-			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]);
-
-	return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
-	int i;
-	OrgDef *pOrgDef;
-
-	pOrgDef = OrgIntel_28F256K3;
-	if (info->flash_id == FLASH_UNKNOWN) {
-		return;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
-		for (i = 0; i < info->sector_count; i++) {
-			if (i > 255) {
-				info->start[i] = base + (i * 0x8000);
-				info->protect[i] = 0;
-			} else {
-				info->start[i] = base +
-						(i * PHYS_FLASH_SECT_SIZE);
-				info->protect[i] = 0;
-			}
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:
-		printf ("INTEL ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F256L18T:
-		printf ("FLASH 28F256L18T\n");
-		break;
-	case FLASH_28F256K3:
-		printf ("FLASH 28F256K3\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-			info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i], info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-	return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (FPW * addr, flash_info_t * info)
-{
-	volatile FPW value;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0x5555] = (FPW) 0x00AA00AA;
-	addr[0x2AAA] = (FPW) 0x00550055;
-	addr[0x5555] = (FPW) 0x00900090;
-
-	mb ();
-	value = addr[0];
-	switch (value) {
-
-	case (FPW) INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
-		return (0);		/* no or unknown flash  */
-	}
-
-	mb ();
-	value = addr[1];	/* device ID        */
-	switch (value) {
-
-	case (FPW) (INTEL_ID_28F256L18T):
-		info->flash_id += FLASH_28F256L18T;
-		info->sector_count = 259;
-		info->size = 0x02000000;
-		break;			/* => 32 MB     */
-
-	case (FPW)(INTEL_ID_28F256K3):
-		info->flash_id += FLASH_28F256K3;
-		info->sector_count = 256;
-		info->size = 0x02000000;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		break;
-	}
-
-	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
-		printf ("** ERROR: sector count %d > max (%d) **\n",
-				info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
-		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	}
-
-	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
-
-	return (info->size);
-}
-
-
-/* unprotects a sector for write and erase
- * on some intel parts, this unprotects the entire chip, but it
- * wont hurt to call this additional times per sector...
- */
-void flash_unprotect_sectors (FPWV * addr)
-{
-#define PD_FINTEL_WSMS_READY_MASK    0x0080
-
-	*addr = (FPW) 0x00500050;	/* clear status register */
-
-	/* this sends the clear lock bit command */
-	*addr = (FPW) 0x00600060;
-	*addr = (FPW) 0x00D000D0;
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	ulong type, start, last;
-	int rcode = 0;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	type = (info->flash_id & FLASH_VENDMASK);
-	if ((type != FLASH_MAN_INTEL)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-				info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-				prot);
-	} else {
-		printf ("\n");
-	}
-
-	flash_vpp(1);
-
-	start = get_timer (0);
-	last = start;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			FPWV *addr = (FPWV *) (info->start[sect]);
-			FPW status;
-
-			printf ("Erasing sector %2d ... ", sect);
-
-			flash_unprotect_sectors (addr);
-
-			/* arm simple, non interrupt dependent timer */
-			reset_timer_masked ();
-
-			*addr = (FPW) 0x00500050;/* clear status register */
-			*addr = (FPW) 0x00200020;/* erase setup */
-			*addr = (FPW) 0x00D000D0;/* erase confirm */
-
-			while (((status =
-				*addr) & (FPW) 0x00800080) !=
-				(FPW) 0x00800080) {
-					if (get_timer_masked () >
-					CONFIG_SYS_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					/* suspend erase     */
-					*addr = (FPW) 0x00B000B0;
-					/* reset to read mode */
-					*addr = (FPW) 0x00FF00FF;
-					rcode = 1;
-					break;
-				}
-			}
-
-			/* clear status register cmd.   */
-			*addr = (FPW) 0x00500050;
-			*addr = (FPW) 0x00FF00FF;/* resest to read mode */
-			printf (" done\n");
-		}
-	}
-
-	flash_vpp(0);
-
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	FPW data;
-	int count, i, l, rc, port_width;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		return 4;
-	}
-/* get lower word aligned address */
-#ifdef FLASH_PORT_WIDTH16
-	wp = (addr & ~1);
-	port_width = 2;
-#else
-	wp = (addr & ~3);
-	port_width = 4;
-#endif
-
-	flash_vpp(1);
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-		for (; i < port_width && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < port_width; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-
-		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
-			flash_vpp(0);
-			return (rc);
-		}
-		wp += port_width;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	count = 0;
-	while (cnt >= port_width) {
-		data = 0;
-		for (i = 0; i < port_width; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
-			flash_vpp(0);
-			return (rc);
-		}
-		wp += port_width;
-		cnt -= port_width;
-		if (count++ > 0x800) {
-			spin_wheel ();
-			count = 0;
-		}
-	}
-
-	if (cnt == 0) {
-		flash_vpp(0);
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < port_width; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *) cp);
-	}
-
-	rc = write_data (info, wp, SWAP (data));
-
-	flash_vpp(0);
-
-	return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t * info, ulong dest, FPW data)
-{
-	FPWV *addr = (FPWV *) dest;
-	ulong status;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) {
-		printf ("not erased at %08lx (%lx)\n", (ulong) addr, (ulong) *addr);
-		return (2);
-	}
-
-	flash_vpp(1);
-
-	flash_unprotect_sectors (addr);
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-	*addr = (FPW) 0x00400040;	/* write setup */
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	reset_timer_masked ();
-
-	/* wait while polling the status register */
-	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
-			flash_vpp(0);
-			return (1);
-		}
-	}
-	*addr = (FPW) 0x00FF00FF;	/* restore read mode */
-	flash_vpp(0);
-	return (0);
-}
-
-void inline spin_wheel (void)
-{
-	static int p = 0;
-	static char w[] = "\\/-";
-
-	printf ("\010%c", w[p]);
-	(++p == 3) ? (p = 0) : 0;
-}
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
index 0817e60..2f6b599 100644
--- a/board/atmel/at91sam9261ek/at91sam9261ek.c
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -57,6 +57,16 @@ static void at91sam9261ek_nand_hw_init(void)
 		       csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
 	/* Configure SMC CS3 for NAND/SmartMedia */
+#ifdef CONFIG_AT91SAM9G10EK
+	at91_sys_write(AT91_SMC_SETUP(3),
+		       AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
+		       AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(3),
+		       AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(7) |
+		       AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(7));
+	at91_sys_write(AT91_SMC_CYCLE(3),
+		       AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+#else
 	at91_sys_write(AT91_SMC_SETUP(3),
 		       AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
 		       AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
@@ -65,6 +75,7 @@ static void at91sam9261ek_nand_hw_init(void)
 		       AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
 	at91_sys_write(AT91_SMC_CYCLE(3),
 		       AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+#endif
 	at91_sys_write(AT91_SMC_MODE(3),
 		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
 		       AT91_SMC_EXNWMODE_DISABLE |
@@ -92,6 +103,21 @@ static void at91sam9261ek_nand_hw_init(void)
 static void at91sam9261ek_dm9000_hw_init(void)
 {
 	/* Configure SMC CS2 for DM9000 */
+#ifdef CONFIG_AT91SAM9G10EK
+	at91_sys_write(AT91_SMC_SETUP(2),
+		       AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(0) |
+		       AT91_SMC_NRDSETUP_(3) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(2),
+		       AT91_SMC_NWEPULSE_(6) | AT91_SMC_NCS_WRPULSE_(8) |
+		       AT91_SMC_NRDPULSE_(6) | AT91_SMC_NCS_RDPULSE_(8));
+	at91_sys_write(AT91_SMC_CYCLE(2),
+		       AT91_SMC_NWECYCLE_(20) | AT91_SMC_NRDCYCLE_(20));
+	at91_sys_write(AT91_SMC_MODE(2),
+		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		       AT91_SMC_EXNWMODE_DISABLE |
+		       AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
+		       AT91_SMC_TDF_(1));
+#else
 	at91_sys_write(AT91_SMC_SETUP(2),
 		       AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
 		       AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
@@ -105,6 +131,7 @@ static void at91sam9261ek_dm9000_hw_init(void)
 		       AT91_SMC_EXNWMODE_DISABLE |
 		       AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
 		       AT91_SMC_TDF_(1));
+#endif
 
 	/* Configure Reset signal as output */
 	at91_set_gpio_output(AT91_PIN_PC10, 0);
@@ -169,7 +196,11 @@ static void at91sam9261ek_lcd_hw_init(void)
 
 	at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1);
 
+#ifdef CONFIG_AT91SAM9G10EK
+	gd->fb_base = CONFIG_AT91SAM9G10_LCD_BASE;
+#else
 	gd->fb_base = AT91SAM9261_SRAM_BASE;
+#endif
 }
 
 #ifdef CONFIG_LCD_INFO
@@ -207,8 +238,13 @@ int board_init(void)
 	/* Enable Ctrlc */
 	console_init_f();
 
+#ifdef CONFIG_AT91SAM9G10EK
+	/* arch number of AT91SAM9G10EK-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G10EK;
+#else
 	/* arch number of AT91SAM9261EK-Board */
 	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK;
+#endif
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
diff --git a/board/atmel/at91sam9m10g45ek/Makefile b/board/atmel/at91sam9m10g45ek/Makefile
new file mode 100644
index 0000000..4caf1e4
--- /dev/null
+++ b/board/atmel/at91sam9m10g45ek/Makefile
@@ -0,0 +1,55 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y += at91sam9m10g45ek.o
+COBJS-y += led.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
new file mode 100644
index 0000000..45a14a9
--- /dev/null
+++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
@@ -0,0 +1,334 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/sizes.h>
+#include <asm/arch/at91sam9g45.h>
+#include <asm/arch/at91sam9_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+#ifdef CONFIG_CMD_NAND
+static void at91sam9m10g45ek_nand_hw_init(void)
+{
+	unsigned long csa;
+
+	/* Enable CS3 */
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA,
+		       csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	at91_sys_write(AT91_SMC_SETUP(3),
+		       AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+		       AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(3),
+		       AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(3) |
+		       AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(2));
+	at91_sys_write(AT91_SMC_CYCLE(3),
+		       AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(4));
+	at91_sys_write(AT91_SMC_MODE(3),
+		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		       AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+		       AT91_SMC_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+		       AT91_SMC_DBW_8 |
+#endif
+		       AT91_SMC_TDF_(3));
+
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIOC);
+
+	/* Configure RDY/BSY */
+	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+	/* Enable NandFlash */
+	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void at91sam9m10g45ek_macb_hw_init(void)
+{
+	unsigned long rstc;
+
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_EMAC);
+
+	/*
+	 * Disable pull-up on:
+	 *	RXDV (PA15) => PHY normal mode (not Test mode)
+	 * 	ERX0 (PA12) => PHY ADDR0
+	 *	ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0
+	 *
+	 * PHY has internal pull-down
+	 */
+	writel(pin_to_mask(AT91_PIN_PA15) |
+	       pin_to_mask(AT91_PIN_PA12) |
+	       pin_to_mask(AT91_PIN_PA13),
+	       pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
+
+	rstc = at91_sys_read(AT91_RSTC_MR);
+
+	/* Need to reset PHY -> 500ms reset */
+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+				     (AT91_RSTC_ERSTL & (0x0D << 8)) |
+				     AT91_RSTC_URSTEN);
+
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
+
+	/* Wait for end hardware reset */
+	while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
+
+	/* Restore NRST value */
+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+				     (rstc) |
+				     AT91_RSTC_URSTEN);
+
+	/* Re-enable pull-up */
+	writel(pin_to_mask(AT91_PIN_PA15) |
+	       pin_to_mask(AT91_PIN_PA12) |
+	       pin_to_mask(AT91_PIN_PA13),
+	       pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
+
+	at91_macb_hw_init();
+}
+#endif
+
+#ifdef CONFIG_LCD
+
+vidinfo_t panel_info = {
+	vl_col:		480,
+	vl_row:		272,
+	vl_clk:		9000000,
+	vl_sync:	ATMEL_LCDC_INVLINE_NORMAL |
+			ATMEL_LCDC_INVFRAME_NORMAL,
+	vl_bpix:	3,
+	vl_tft:		1,
+	vl_hsync_len:	45,
+	vl_left_margin:	1,
+	vl_right_margin:1,
+	vl_vsync_len:	1,
+	vl_upper_margin:40,
+	vl_lower_margin:1,
+	mmio:		AT91SAM9G45_LCDC_BASE,
+};
+
+
+void lcd_enable(void)
+{
+	at91_set_A_periph(AT91_PIN_PE6, 1);	/* power up */
+}
+
+void lcd_disable(void)
+{
+	at91_set_A_periph(AT91_PIN_PE6, 0);	/* power down */
+}
+
+static void at91sam9m10g45ek_lcd_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PE0, 0);	/* LCDDPWR */
+	at91_set_A_periph(AT91_PIN_PE2, 0);	/* LCDCC */
+	at91_set_A_periph(AT91_PIN_PE3, 0);	/* LCDVSYNC */
+	at91_set_A_periph(AT91_PIN_PE4, 0);	/* LCDHSYNC */
+	at91_set_A_periph(AT91_PIN_PE5, 0);	/* LCDDOTCK */
+
+	at91_set_A_periph(AT91_PIN_PE7, 0);	/* LCDD0 */
+	at91_set_A_periph(AT91_PIN_PE8, 0);	/* LCDD1 */
+	at91_set_A_periph(AT91_PIN_PE9, 0);	/* LCDD2 */
+	at91_set_A_periph(AT91_PIN_PE10, 0);	/* LCDD3 */
+	at91_set_A_periph(AT91_PIN_PE11, 0);	/* LCDD4 */
+	at91_set_A_periph(AT91_PIN_PE12, 0);	/* LCDD5 */
+	at91_set_A_periph(AT91_PIN_PE13, 0);	/* LCDD6 */
+	at91_set_A_periph(AT91_PIN_PE14, 0);	/* LCDD7 */
+	at91_set_A_periph(AT91_PIN_PE15, 0);	/* LCDD8 */
+	at91_set_A_periph(AT91_PIN_PE16, 0);	/* LCDD9 */
+	at91_set_A_periph(AT91_PIN_PE17, 0);	/* LCDD10 */
+	at91_set_A_periph(AT91_PIN_PE18, 0);	/* LCDD11 */
+	at91_set_A_periph(AT91_PIN_PE19, 0);	/* LCDD12 */
+	at91_set_B_periph(AT91_PIN_PE20, 0);	/* LCDD13 */
+	at91_set_A_periph(AT91_PIN_PE21, 0);	/* LCDD14 */
+	at91_set_A_periph(AT91_PIN_PE22, 0);	/* LCDD15 */
+	at91_set_A_periph(AT91_PIN_PE23, 0);	/* LCDD16 */
+	at91_set_A_periph(AT91_PIN_PE24, 0);	/* LCDD17 */
+	at91_set_A_periph(AT91_PIN_PE25, 0);	/* LCDD18 */
+	at91_set_A_periph(AT91_PIN_PE26, 0);	/* LCDD19 */
+	at91_set_A_periph(AT91_PIN_PE27, 0);	/* LCDD20 */
+	at91_set_B_periph(AT91_PIN_PE28, 0);	/* LCDD21 */
+	at91_set_A_periph(AT91_PIN_PE29, 0);	/* LCDD22 */
+	at91_set_A_periph(AT91_PIN_PE30, 0);	/* LCDD23 */
+
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_LCDC);
+
+	gd->fb_base = CONFIG_AT91SAM9G45_LCD_BASE;
+}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size;
+	int i;
+	char temp[32];
+
+	lcd_printf ("%s\n", U_BOOT_VERSION);
+	lcd_printf ("(C) 2008 ATMEL Corp\n");
+	lcd_printf ("at91support@atmel.com\n");
+	lcd_printf ("%s CPU at %s MHz\n",
+		AT91_CPU_NAME,
+		strmhz(temp, get_cpu_clk_rate()));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+	nand_size = 0;
+	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+		nand_size += nand_info[i].size;
+	lcd_printf ("  %ld MB SDRAM, %ld MB NAND\n",
+		dram_size >> 20,
+		nand_size >> 20 );
+}
+#endif /* CONFIG_LCD_INFO */
+#endif
+
+int board_init(void)
+{
+	/* Enable Ctrlc */
+	console_init_f();
+
+	/* arch number of AT91SAM9M10G45EK-Board */
+#ifdef CONFIG_AT91SAM9M10G45EK
+	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9M10G45EK;
+#elif defined CONFIG_AT91SAM9G45EKES
+	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G45EKES;
+#endif
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	at91_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+	at91sam9m10g45ek_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+	at91_spi0_hw_init(1 << 0);
+#endif
+#ifdef CONFIG_ATMEL_SPI
+	at91_spi0_hw_init(1 << 4);
+#endif
+
+#ifdef CONFIG_MACB
+	at91sam9m10g45ek_macb_hw_init();
+#endif
+
+#ifdef CONFIG_LCD
+	at91sam9m10g45ek_lcd_hw_init();
+#endif
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+	return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_MACB
+	/*
+	 * Initialize ethernet HW addr prior to starting Linux,
+	 * needed for nfsroot
+	 */
+	eth_init(gd->bd);
+#endif
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)AT91SAM9G45_BASE_EMAC, 0x00);
+#endif
+	return rc;
+}
+
+/* SPI chip select control */
+#ifdef CONFIG_ATMEL_SPI
+#include <spi.h>
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	return bus == 0 && cs < 2;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+	switch(slave->cs) {
+		case 1:
+			at91_set_gpio_output(AT91_PIN_PB18, 0);
+			break;
+		case 0:
+		default:
+			at91_set_gpio_output(AT91_PIN_PB3, 0);
+			break;
+	}
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+	switch(slave->cs) {
+		case 1:
+			at91_set_gpio_output(AT91_PIN_PB18, 1);
+			break;
+		case 0:
+		default:
+			at91_set_gpio_output(AT91_PIN_PB3, 1);
+		break;
+	}
+}
+#endif /* CONFIG_ATMEL_SPI */
diff --git a/board/atmel/at91sam9m10g45ek/config.mk b/board/atmel/at91sam9m10g45ek/config.mk
new file mode 100644
index 0000000..7fe9d03
--- /dev/null
+++ b/board/atmel/at91sam9m10g45ek/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x73f00000
diff --git a/board/atmel/at91sam9m10g45ek/led.c b/board/atmel/at91sam9m10g45ek/led.c
new file mode 100644
index 0000000..ff59a2d
--- /dev/null
+++ b/board/atmel/at91sam9m10g45ek/led.c
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9g45.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void coloured_LED_init(void)
+{
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIODE);
+
+	at91_set_gpio_output(CONFIG_RED_LED, 1);
+	at91_set_gpio_output(CONFIG_GREEN_LED, 1);
+
+	at91_set_gpio_value(CONFIG_RED_LED, 0);
+	at91_set_gpio_value(CONFIG_GREEN_LED, 1);
+}
diff --git a/board/omap3/pandora/pandora.h b/board/omap3/pandora/pandora.h
index 8f0838c..f06ee5b 100644
--- a/board/omap3/pandora/pandora.h
+++ b/board/omap3/pandora/pandora.h
@@ -107,15 +107,6 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(GPMC_D15),		(IEN  | PTD | DIS | M0)) /*GPMC_D15*/\
  MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS0*/\
  MUX_VAL(CP(GPMC_NCS1),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS1*/\
- MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS2*/\
- MUX_VAL(CP(GPMC_NCS3),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS3*/\
- MUX_VAL(CP(GPMC_NCS4),		(IDIS | PTU | EN  | M0))\
- MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_NCS6),		(IEN  | PTD | DIS | M1))\
- MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTU | EN  | M1))\
- MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTD | DIS | M0))\
- MUX_VAL(CP(GPMC_WAIT2),	(IEN  | PTU | EN  | M0))\
- MUX_VAL(CP(GPMC_WAIT3),	(IEN  | PTU | EN  | M0))\
  MUX_VAL(CP(GPMC_CLK),		(IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\
  MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
  MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
@@ -154,26 +145,26 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(DSS_DATA22),	(IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
  MUX_VAL(CP(DSS_DATA23),	(IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
  /*GPIO based game buttons*/\
- MUX_VAL(CP(CAM_XCLKA),		(IEN  | PTU | DIS | M4)) /*GPIO_96 - LEFT*/\
- MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | DIS | M4)) /*GPIO_97 - L2*/\
- MUX_VAL(CP(CAM_FLD),		(IEN  | PTU | DIS | M4)) /*GPIO_98 - RIGHT*/\
- MUX_VAL(CP(CAM_D0),		(IEN  | PTU | DIS | M4)) /*GPIO_99 - MENU*/\
- MUX_VAL(CP(CAM_D1),		(IEN  | PTU | DIS | M4)) /*GPIO_100 - START*/\
- MUX_VAL(CP(CAM_D2),		(IEN  | PTU | DIS | M4)) /*GPIO_101 - Y*/\
- MUX_VAL(CP(CAM_D3),		(IEN  | PTU | DIS | M4)) /*GPIO_102 - L1*/\
- MUX_VAL(CP(CAM_D4),		(IEN  | PTU | DIS | M4)) /*GPIO_103 - DOWN*/\
- MUX_VAL(CP(CAM_D5),		(IEN  | PTU | DIS | M4)) /*GPIO_104 - SELECT*/\
- MUX_VAL(CP(CAM_D6),		(IEN  | PTU | DIS | M4)) /*GPIO_105 - R1*/\
- MUX_VAL(CP(CAM_D7),		(IEN  | PTU | DIS | M4)) /*GPIO_106 - B*/\
- MUX_VAL(CP(CAM_D8),		(IEN  | PTU | DIS | M4)) /*GPIO_107 - R2*/\
- MUX_VAL(CP(CAM_D10),		(IEN  | PTU | DIS | M4)) /*GPIO_109 - X*/\
- MUX_VAL(CP(CAM_D11),		(IEN  | PTU | DIS | M4)) /*GPIO_110 - UP*/\
- MUX_VAL(CP(CAM_XCLKB),		(IEN  | PTU | DIS | M4)) /*GPIO_111 - A*/\
+ MUX_VAL(CP(CAM_XCLKA),		(IEN  | PTD | DIS | M4)) /*GPIO_96 - LEFT*/\
+ MUX_VAL(CP(CAM_PCLK),		(IEN  | PTD | DIS | M4)) /*GPIO_97 - L2*/\
+ MUX_VAL(CP(CAM_FLD),		(IEN  | PTD | DIS | M4)) /*GPIO_98 - RIGHT*/\
+ MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M4)) /*GPIO_99 - MENU*/\
+ MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M4)) /*GPIO_100 - START*/\
+ MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M4)) /*GPIO_101 - Y*/\
+ MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M4)) /*GPIO_102 - L1*/\
+ MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M4)) /*GPIO_103 - DOWN*/\
+ MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M4)) /*GPIO_104 - SELECT*/\
+ MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M4)) /*GPIO_105 - R1*/\
+ MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M4)) /*GPIO_106 - B*/\
+ MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M4)) /*GPIO_107 - R2*/\
+ MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M4)) /*GPIO_109 - X*/\
+ MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M4)) /*GPIO_110 - UP*/\
+ MUX_VAL(CP(CAM_XCLKB),		(IEN  | PTD | DIS | M4)) /*GPIO_111 - A*/\
  /*Audio Interface To External DAC (Headphone, Speakers)*/\
  MUX_VAL(CP(MCBSP2_FSX),	(IDIS | PTD | DIS | M0)) /*McBSP2_FSX*/\
  MUX_VAL(CP(MCBSP2_CLKX),	(IDIS | PTD | DIS | M0)) /*McBSP2_CLKX*/\
  MUX_VAL(CP(MCBSP2_DX),		(IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
- MUX_VAL(CP(MCBSP_CLKS),	(IEN  | PTU | DIS | M0)) /*McBSP_CLKS*/\
+ MUX_VAL(CP(MCBSP_CLKS),	(IEN  | PTD | DIS | M0)) /*McBSP_CLKS*/\
  MUX_VAL(CP(MCBSP2_DR),		(IDIS | PTD | DIS | M4)) /*GPIO_118*/\
 							 /* - nPOWERDOWN_DAC*/\
  /*Expansion card 1*/\
@@ -219,13 +210,13 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(MCBSP4_DX),		(IDIS | PTD | DIS | M0)) /*McBSP4_DX*/\
  MUX_VAL(CP(MCBSP4_FSX),	(IEN  | PTD | DIS | M0)) /*McBSP4_FSX*/\
  /*GPIO definitions for muxed pins on AV connector*/\
- MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M4)) /*GPIO_144,*/\
+ MUX_VAL(CP(UART2_CTS),		(IEN  | PTD | EN  | M4)) /*GPIO_144,*/\
 							 /*UART2_CTS*/\
- MUX_VAL(CP(UART2_RTS),		(IEN  | PTU | DIS | M4)) /*GPIO_145,*/\
+ MUX_VAL(CP(UART2_RTS),		(IEN  | PTD | EN  | M4)) /*GPIO_145,*/\
 							 /*UART2_RTS*/\
- MUX_VAL(CP(UART2_TX),		(IEN  | PTU | EN  | M4)) /*GPIO_146,*/\
+ MUX_VAL(CP(UART2_TX),		(IEN  | PTD | EN  | M4)) /*GPIO_146,*/\
 							 /*UART2_TX*/\
- MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M4)) /*GPIO_147,*/\
+ MUX_VAL(CP(UART2_RX),		(IEN  | PTD | EN  | M4)) /*GPIO_147,*/\
 							 /*UART2_RX*/\
  /*Serial Interface (Peripheral boot, Linux console, on AV connector)*/\
  MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)) /*UART3_RX*/\
@@ -240,30 +231,26 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(MCBSP1_DR),		(IDIS | PTD | DIS | M4)) /*GPIO_159*/\
 							 /* - LED_WIFI*/\
  /*Switches*/\
- MUX_VAL(CP(MCSPI1_CS2),	(IEN  | PTU | DIS | M4)) /*GPIO_176*/\
+ MUX_VAL(CP(MCSPI1_CS2),	(IEN  | PTD | DIS | M4)) /*GPIO_176*/\
 							 /* - nHOLD_SWITCH*/\
- MUX_VAL(CP(CAM_D9),		(IEN  | PTU | DIS | M4)) /*GPIO_108*/\
+ MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M4)) /*GPIO_108*/\
 							 /* - nLID_SWITCH*/\
  /*External IRQs*/\
- MUX_VAL(CP(CAM_HS),		(IEN  | PTU | DIS | M4)) /*GPIO_94*/\
+ MUX_VAL(CP(CAM_HS),		(IEN  | PTD | DIS | M4)) /*GPIO_94*/\
 							 /* - nTOUCH_IRQ*/\
  MUX_VAL(CP(ETK_D7_ES2),	(IEN  | PTD | DIS | M4)) /*GPIO_21*/\
 							 /* - WIFI_IRQ*/\
  MUX_VAL(CP(MCBSP1_FSX),	(IEN  | PTD | DIS | M4)) /*GPIO_161*/\
 							 /* - nIRQ_NUB1*/\
- MUX_VAL(CP(CAM_WEN),		(IEN  | PTU | DIS | M4)) /*GPIO_167*/\
+ MUX_VAL(CP(MCBSP1_CLKX),	(IEN  | PTD | DIS | M4)) /*GPIO_162*/\
 							 /* - nIRQ_NUB2*/\
  /*Various other stuff*/\
- MUX_VAL(CP(CAM_VS),		(IEN  | PTU | DIS | M4)) /*GPIO_95*/\
-							 /* - nTOUCH_BUSY*/\
  MUX_VAL(CP(UART3_CTS_RCTX),	(IEN  | PTD | DIS | M4)) /*GPIO_163*/\
 							 /* - nOC_USB5*/\
- MUX_VAL(CP(MCBSP1_CLKX),	(IDIS | PTD | DIS | M4)) /*GPIO_162*/\
-							 /* - START_ADC*/\
  MUX_VAL(CP(ETK_D8_ES2),	(IEN  | PTD | DIS | M4)) /*GPIO_22*/\
 							 /* - MSECURE*/\
- MUX_VAL(CP(CAM_STROBE),	(IEN  | PTU | DIS | M4)) /*GPIO_126*/\
-							 /* - HP_DETECT*/\
+ MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M4)) /*GPIO_115*/\
+							 /* - POP_OVERHEAT*/\
  /*External Resets and Enables*/\
  MUX_VAL(CP(ETK_D0_ES2),	(IDIS | PTD | DIS | M4)) /*GPIO_14*/\
 							 /* - nHDPHN_SHUTDOWN*/\
@@ -275,16 +262,15 @@ const omap3_sysinfo sysinfo = {
 							 /* - nLCD_RESET*/\
  MUX_VAL(CP(MCBSP1_CLKR),	(IDIS | PTD | DIS | M4)) /*GPIO_156*/\
 							 /* - RESET_NUBS*/\
- MUX_VAL(CP(UART3_RTS_SD),	(IDIS | PTU | EN  | M4)) /*GPIO_164*/\
+ MUX_VAL(CP(UART3_RTS_SD),	(IDIS | PTD | DIS | M4)) /*GPIO_164*/\
 							 /* - EN_USB_5V*/\
- /*Unused*/\
- MUX_VAL(CP(HDQ_SIO),		(IEN  | PTU | EN  | M0)) /*HDQ_SIO - NC*/\
- MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) /*CSI2_DX0 - NC*/\
- MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) /*CSI2_DY0 - NC*/\
- MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M0)) /*CSI2_DX1 - NC*/\
- MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M0)) /*CSI2_DY1 - NC*/\
- MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M0)) /*I2C2_SCL - NC*/\
- MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M0)) /*I2C2_SDA - NC*/\
+ /*Spare GPIOs*/\
+ MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTD | EN  | M4)) /*GPIO_58*/\
+ MUX_VAL(CP(GPMC_WAIT2),	(IEN  | PTD | EN  | M4)) /*GPIO_64*/\
+ MUX_VAL(CP(GPMC_WAIT3),	(IEN  | PTD | EN  | M4)) /*GPIO_65*/\
+ MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M4)) /*GPIO_95*/\
+ MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | EN  | M4)) /*GPIO_167*/\
+ MUX_VAL(CP(HDQ_SIO),		(IEN  | PTD | EN  | M4)) /*GPIO_170*/\
  /*HS USB OTG Port (connects to HSUSB0)*/\
  MUX_VAL(CP(HSUSB0_CLK),	(IEN  | PTD | DIS | M0)) /*HSUSB0_CLK*/\
  MUX_VAL(CP(HSUSB0_STP),	(IDIS | PTU | EN  | M0)) /*HSUSB0_STP*/\
@@ -338,8 +324,6 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(SYS_BOOT5),		(IEN  | PTD | DIS | M4)) /*GPIO_7*/\
  MUX_VAL(CP(SYS_BOOT6),		(IEN  | PTD | DIS | M4)) /*GPIO_8*/\
  MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
- MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M4)) /*SYS_CLKOUT1 - NC*/\
- MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTD | DIS | M4)) /*SYS_CLKOUT2 - NC*/\
  /*JTAG*/\
  MUX_VAL(CP(JTAG_nTRST),	(IEN  | PTD | DIS | M0)) /*JTAG_nTRST*/\
  MUX_VAL(CP(JTAG_TCK),		(IEN  | PTD | DIS | M0)) /*JTAG_TCK*/\
@@ -412,6 +396,6 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_mbusflag*/\
  MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_sbusflag*/\
  MUX_VAL(CP(SDRC_CKE0),		(IDIS | PTU | EN  | M0)) /*sdrc_cke0*/\
- MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTD | DIS | M7)) /*sdrc_cke1*/
+ MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTU | EN  | M0)) /*sdrc_cke1*/
 
 #endif
diff --git a/cpu/arm926ejs/at91/Makefile b/cpu/arm926ejs/at91/Makefile
index 3da89f4..4f467be 100644
--- a/cpu/arm926ejs/at91/Makefile
+++ b/cpu/arm926ejs/at91/Makefile
@@ -29,8 +29,11 @@ COBJS-$(CONFIG_AT91CAP9)	+= at91cap9_devices.o
 COBJS-$(CONFIG_AT91SAM9260)	+= at91sam9260_devices.o
 COBJS-$(CONFIG_AT91SAM9G20)	+= at91sam9260_devices.o
 COBJS-$(CONFIG_AT91SAM9261)	+= at91sam9261_devices.o
+COBJS-$(CONFIG_AT91SAM9G10)	+= at91sam9261_devices.o
 COBJS-$(CONFIG_AT91SAM9263)	+= at91sam9263_devices.o
 COBJS-$(CONFIG_AT91SAM9RL)	+= at91sam9rl_devices.o
+COBJS-$(CONFIG_AT91SAM9M10G45)	+= at91sam9m10g45_devices.o
+COBJS-$(CONFIG_AT91SAM9G45)	+= at91sam9m10g45_devices.o
 COBJS-$(CONFIG_AT91_LED)	+= led.o
 COBJS-y += clock.o
 COBJS-y += cpu.o
diff --git a/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
new file mode 100644
index 0000000..98d90f2
--- /dev/null
+++ b/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
@@ -0,0 +1,175 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+void at91_serial0_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PB19, 1);	/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PB18, 0);	/* RXD0 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_US0);
+}
+
+void at91_serial1_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD1 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_US1);
+}
+
+void at91_serial2_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PD6, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PD7, 0);		/* RXD2 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_US2);
+}
+
+void at91_serial3_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PB12, 0);	/* DRXD */
+	at91_set_A_periph(AT91_PIN_PB13, 1);	/* DTXD */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);;
+}
+
+void at91_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+	at91_serial0_hw_init();
+#endif
+
+#ifdef CONFIG_USART1
+	at91_serial1_hw_init();
+#endif
+
+#ifdef CONFIG_USART2
+	at91_serial2_hw_init();
+#endif
+
+#ifdef CONFIG_USART3	/* DBGU */
+	at91_serial3_hw_init();
+#endif
+}
+
+#ifdef CONFIG_ATMEL_SPI
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+	at91_set_A_periph(AT91_PIN_PB0, 0);	/* SPI0_MISO */
+	at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI0_MOSI */
+	at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI0_SPCK */
+
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_SPI0);
+
+	if (cs_mask & (1 << 0)) {
+		at91_set_A_periph(AT91_PIN_PB3, 0);
+	}
+	if (cs_mask & (1 << 1)) {
+		at91_set_B_periph(AT91_PIN_PB18, 0);
+	}
+	if (cs_mask & (1 << 2)) {
+		at91_set_B_periph(AT91_PIN_PB19, 0);
+	}
+	if (cs_mask & (1 << 3)) {
+		at91_set_B_periph(AT91_PIN_PD27, 0);
+	}
+	if (cs_mask & (1 << 4)) {
+		at91_set_gpio_output(AT91_PIN_PB3, 0);
+	}
+	if (cs_mask & (1 << 5)) {
+		at91_set_gpio_output(AT91_PIN_PB18, 0);
+	}
+	if (cs_mask & (1 << 6)) {
+		at91_set_gpio_output(AT91_PIN_PB19, 0);
+	}
+	if (cs_mask & (1 << 7)) {
+		at91_set_gpio_output(AT91_PIN_PD27, 0);
+	}
+}
+
+void at91_spi1_hw_init(unsigned long cs_mask)
+{
+	at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_MISO */
+	at91_set_A_periph(AT91_PIN_PB15, 0);	/* SPI1_MOSI */
+	at91_set_A_periph(AT91_PIN_PB16, 0);	/* SPI1_SPCK */
+
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_SPI1);
+
+	if (cs_mask & (1 << 0)) {
+		at91_set_A_periph(AT91_PIN_PB17, 0);
+	}
+	if (cs_mask & (1 << 1)) {
+		at91_set_B_periph(AT91_PIN_PD28, 0);
+	}
+	if (cs_mask & (1 << 2)) {
+		at91_set_A_periph(AT91_PIN_PD18, 0);
+	}
+	if (cs_mask & (1 << 3)) {
+		at91_set_A_periph(AT91_PIN_PD19, 0);
+	}
+	if (cs_mask & (1 << 4)) {
+		at91_set_gpio_output(AT91_PIN_PB17, 0);
+	}
+	if (cs_mask & (1 << 5)) {
+		at91_set_gpio_output(AT91_PIN_PD28, 0);
+	}
+	if (cs_mask & (1 << 6)) {
+		at91_set_gpio_output(AT91_PIN_PD18, 0);
+	}
+	if (cs_mask & (1 << 7)) {
+		at91_set_gpio_output(AT91_PIN_PD19, 0);
+	}
+
+}
+#endif
+
+#ifdef CONFIG_MACB
+void at91_macb_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ETXCK_EREFCK */
+	at91_set_A_periph(AT91_PIN_PA15, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PA10, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PA11, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PA19, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PA18, 0);	/* EMDC */
+#ifndef CONFIG_RMII
+	at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECRS */
+	at91_set_B_periph(AT91_PIN_PA30, 0);	/* ECOL */
+	at91_set_B_periph(AT91_PIN_PA8,  0);	/* ERX2 */
+	at91_set_B_periph(AT91_PIN_PA9,  0);	/* ERX3 */
+	at91_set_B_periph(AT91_PIN_PA28, 0);	/* ERXCK */
+	at91_set_B_periph(AT91_PIN_PA6,  0);	/* ETX2 */
+	at91_set_B_periph(AT91_PIN_PA7,  0);	/* ETX3 */
+	at91_set_B_periph(AT91_PIN_PA27, 0);	/* ETXER */
+#endif
+}
+#endif
diff --git a/cpu/arm926ejs/at91/clock.c b/cpu/arm926ejs/at91/clock.c
index 9f03468..574f488 100644
--- a/cpu/arm926ejs/at91/clock.c
+++ b/cpu/arm926ejs/at91/clock.c
@@ -183,15 +183,23 @@ int at91_clock_init(unsigned long main_clock)
 	 * For now, assume this parentage won't change.
 	 */
 	mckr = at91_sys_read(AT91_PMC_MCKR);
+#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+	/* plla divisor by 2 */
+	plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12));
+#endif
 	freq = mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_CSS);
+
 	freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2));			/* prescale */
 #if defined(CONFIG_AT91RM9200)
 	mck_rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
 #elif defined(CONFIG_AT91SAM9G20)
 	mck_rate_hz = (mckr & AT91_PMC_MDIV) ?
-		freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;	/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
+		freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;		/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
 	if (mckr & AT91_PMC_PDIV)
-		freq /= 2;		/* processor clock division */
+		freq /= 2;						/* processor clock division */
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+	mck_rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
+		freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
 #else
 	mck_rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
 #endif
diff --git a/doc/README.at91 b/doc/README.at91
index 4a2c56b..84b5595 100644
--- a/doc/README.at91
+++ b/doc/README.at91
@@ -27,7 +27,7 @@ Environment variables
 
 
 ------------------------------------------------------------------------------
-AT91SAM9261EK
+AT91SAM9261EK, AT91SAM9G10EK
 ------------------------------------------------------------------------------
 
 Memory map
@@ -75,6 +75,26 @@ Environment variables
 
 
 ------------------------------------------------------------------------------
+AT91SAM9M10G45EK
+------------------------------------------------------------------------------
+
+Memory map
+	0x20000000 - 23FFFFFF	SDRAM (64 MB)
+	0xC0000000 - Cxxxxxxx	Atmel Dataflash card (J12)
+
+Environment variables
+
+	U-Boot environment variables can be stored at different places:
+		- Dataflash on SPI chip select 0 (dataflash card)
+		- Nand flash.
+
+	You can choose your storage location at config step (here for at91sam9m10g45ek) :
+		make at91sam9m10g45ek_config			- use data flash (spi cs0) (default)
+		make at91sam9m10g45ek_nandflash_config		- use nand flash
+		make at91sam9m10g45ek_dataflash_cs0_config	- use data flash (spi cs0)
+
+
+------------------------------------------------------------------------------
 AT91SAM9RLEK
 ------------------------------------------------------------------------------
 
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index c1325b9..a5680e8 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -40,6 +40,7 @@ COBJS-$(CONFIG_DRIVER_NAND_BFIN) += bfin_nand.o
 COBJS-$(CONFIG_NAND_DAVINCI) += davinci_nand.o
 COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
 COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
+COBJS-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
 COBJS-$(CONFIG_NAND_MPC5121_NFC) += mpc5121_nfc.o
 COBJS-$(CONFIG_NAND_NOMADIK) += nomadik.o
 COBJS-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o
diff --git a/drivers/mtd/nand/kirkwood_nand.c b/drivers/mtd/nand/kirkwood_nand.c
new file mode 100644
index 0000000..376378e
--- /dev/null
+++ b/drivers/mtd/nand/kirkwood_nand.c
@@ -0,0 +1,82 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/kirkwood.h>
+#include <nand.h>
+
+/* NAND Flash Soc registers */
+struct kwnandf_registers {
+	u32 rd_params;	/* 0x10418 */
+	u32 wr_param;	/* 0x1041c */
+	u8  pad[0x10470 - 0x1041c - 4];
+	u32 ctrl;	/* 0x10470 */
+};
+
+static struct kwnandf_registers *nf_reg =
+	(struct kwnandf_registers *)KW_NANDF_BASE;
+
+/*
+ * hardware specific access to control-lines/bits
+ */
+#define NAND_ACTCEBOOT_BIT		0x02
+
+static void kw_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+			      unsigned int ctrl)
+{
+	struct nand_chip *nc = mtd->priv;
+	u32 offs;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		offs = (1 << 0);	/* Commands with A[1:0] == 01 */
+	else if (ctrl & NAND_ALE)
+		offs = (1 << 1);	/* Addresses with A[1:0] == 10 */
+	else
+		return;
+
+	writeb(cmd, nc->IO_ADDR_W + offs);
+}
+
+void kw_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+	u32 data;
+
+	data = readl(&nf_reg->ctrl);
+	data |= NAND_ACTCEBOOT_BIT;
+	writel(data, &nf_reg->ctrl);
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+	nand->options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING;
+	nand->ecc.mode = NAND_ECC_SOFT;
+	nand->cmd_ctrl = kw_nand_hwcontrol;
+	nand->chip_delay = 30;
+	nand->select_chip = kw_nand_select_chip;
+	return 0;
+}
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 6de0a04..c184353 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -447,14 +447,16 @@ static int macb_init(struct eth_device *netdev, bd_t *bd)
 	/* choose RMII or MII mode. This depends on the board */
 #ifdef CONFIG_RMII
 #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
-    defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20)
+    defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
+	defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
 	macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
 #else
 	macb_writel(macb, USRIO, 0);
 #endif
 #else
 #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
-    defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20)
+    defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
+	defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
 	macb_writel(macb, USRIO, MACB_BIT(CLKEN));
 #else
 	macb_writel(macb, USRIO, MACB_BIT(MII));
diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h
index a82955c..9fe94c7 100644
--- a/include/asm-arm/arch-at91/at91_pmc.h
+++ b/include/asm-arm/arch-at91/at91_pmc.h
@@ -89,6 +89,7 @@
 #define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9,CAP9 only] */
 #define			AT91SAM9_PMC_MDIV_2		(1 << 8)
 #define			AT91SAM9_PMC_MDIV_4		(2 << 8)
+#define			AT91SAM9_PMC_MDIV_3		(3 << 8)	/* [some SAM9 only] */
 #define			AT91SAM9_PMC_MDIV_6		(3 << 8)
 #define		AT91_PMC_PDIV		(1 << 12)		/* Processor Clock Division [some SAM9 only] */
 #define			AT91_PMC_PDIV_1			(0 << 12)
diff --git a/include/asm-arm/arch-at91/at91sam9_matrix.h b/include/asm-arm/arch-at91/at91sam9_matrix.h
index 913f374..6d97189 100644
--- a/include/asm-arm/arch-at91/at91sam9_matrix.h
+++ b/include/asm-arm/arch-at91/at91sam9_matrix.h
@@ -21,6 +21,8 @@
 #include <asm/arch/at91sam9rl_matrix.h>
 #elif defined(CONFIG_AT91CAP9)
 #include <asm/arch/at91cap9_matrix.h>
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+#include <asm/arch/at91sam9g45_matrix.h>
 #else
 #error "Unsupported AT91SAM9/CAP9 processor"
 #endif
diff --git a/include/asm-arm/arch-at91/at91sam9g45.h b/include/asm-arm/arch-at91/at91sam9g45.h
new file mode 100644
index 0000000..0feed9c
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9g45.h
@@ -0,0 +1,139 @@
+/*
+ * Chip-specific header file for the AT91SAM9M1x family
+ *
+ *  Copyright (C) 2008 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_H
+#define AT91SAM9G45_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Controller Interrupt */
+#define AT91SAM9G45_ID_PIOA	2	/* Parallel I/O Controller A */
+#define AT91SAM9G45_ID_PIOB	3	/* Parallel I/O Controller B */
+#define AT91SAM9G45_ID_PIOC	4	/* Parallel I/O Controller C */
+#define AT91SAM9G45_ID_PIODE	5	/* Parallel I/O Controller D and E */
+#define AT91SAM9G45_ID_TRNG	6	/* True Random Number Generator */
+#define AT91SAM9G45_ID_US0	7	/* USART 0 */
+#define AT91SAM9G45_ID_US1	8	/* USART 1 */
+#define AT91SAM9G45_ID_US2	9	/* USART 2 */
+#define AT91SAM9G45_ID_US3	10	/* USART 3 */
+#define AT91SAM9G45_ID_MCI0	11	/* High Speed Multimedia Card Interface 0 */
+#define AT91SAM9G45_ID_TWI0	12	/* Two-Wire Interface 0 */
+#define AT91SAM9G45_ID_TWI1	13	/* Two-Wire Interface 1 */
+#define AT91SAM9G45_ID_SPI0	14	/* Serial Peripheral Interface 0 */
+#define AT91SAM9G45_ID_SPI1	15	/* Serial Peripheral Interface 1 */
+#define AT91SAM9G45_ID_SSC0	16	/* Synchronous Serial Controller 0 */
+#define AT91SAM9G45_ID_SSC1	17	/* Synchronous Serial Controller 1 */
+#define AT91SAM9G45_ID_TCB	18	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define AT91SAM9G45_ID_PWMC	19	/* Pulse Width Modulation Controller */
+#define AT91SAM9G45_ID_TSC	20	/* Touch Screen ADC Controller */
+#define AT91SAM9G45_ID_DMA	21	/* DMA Controller */
+#define AT91SAM9G45_ID_UHPHS	22	/* USB Host High Speed */
+#define AT91SAM9G45_ID_LCDC	23	/* LCD Controller */
+#define AT91SAM9G45_ID_AC97C	24	/* AC97 Controller */
+#define AT91SAM9G45_ID_EMAC	25	/* Ethernet MAC */
+#define AT91SAM9G45_ID_ISI	26	/* Image Sensor Interface */
+#define AT91SAM9G45_ID_UDPHS	27	/* USB Device High Speed */
+#define AT91SAM9G45_ID_AESTDESSHA 28	/* AES + T-DES + SHA */
+#define AT91SAM9G45_ID_MCI1	29	/* High Speed Multimedia Card Interface 1 */
+#define AT91SAM9G45_ID_VDEC	30	/* Video Decoder */
+#define AT91SAM9G45_ID_IRQ0	31	/* Advanced Interrupt Controller */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9G45_BASE_UDPHS		0xfff78000
+#define AT91SAM9G45_BASE_TC0		0xfff7c000
+#define AT91SAM9G45_BASE_TC1		0xfff7c040
+#define AT91SAM9G45_BASE_TC2		0xfff7c080
+#define AT91SAM9G45_BASE_MCI0		0xfff80000
+#define AT91SAM9G45_BASE_TWI0		0xfff84000
+#define AT91SAM9G45_BASE_TWI1		0xfff88000
+#define AT91SAM9G45_BASE_US0		0xfff8c000
+#define AT91SAM9G45_BASE_US1		0xfff90000
+#define AT91SAM9G45_BASE_US2		0xfff94000
+#define AT91SAM9G45_BASE_US3		0xfff98000
+#define AT91SAM9G45_BASE_SSC0		0xfff9c000
+#define AT91SAM9G45_BASE_SSC1		0xfffa0000
+#define AT91SAM9G45_BASE_SPI0		0xfffa4000
+#define AT91SAM9G45_BASE_SPI1		0xfffa8000
+#define AT91SAM9G45_BASE_AC97C		0xfffac000
+#define AT91SAM9G45_BASE_TSC		0xfffb0000
+#define AT91SAM9G45_BASE_ISI		0xfffb4000
+#define AT91SAM9G45_BASE_PWMC		0xfffb8000
+#define AT91SAM9G45_BASE_EMAC		0xfffbc000
+#define AT91SAM9G45_BASE_AES		0xfffc0000
+#define AT91SAM9G45_BASE_TDES		0xfffc4000
+#define AT91SAM9G45_BASE_SHA		0xfffc8000
+#define AT91SAM9G45_BASE_TRNG		0xfffcc000
+#define AT91SAM9G45_BASE_MCI1		0xfffd0000
+#define AT91SAM9G45_BASE_TC3		0xfffd4000
+#define AT91SAM9G45_BASE_TC4		0xfffd4040
+#define AT91SAM9G45_BASE_TC5		0xfffd4080
+#define AT91_BASE_SYS			0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_DDRSDRC1	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_DMA	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE	(0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
+#define AT91_RTC	(0xfffffdb0 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9G45_BASE_US0
+#define AT91_USART1	AT91SAM9G45_BASE_US1
+#define AT91_USART2	AT91SAM9G45_BASE_US2
+#define AT91_USART3	AT91SAM9G45_BASE_US3
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9G45_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9G45_SRAM_SIZE	SZ_64K		/* Internal SRAM size (64Kb) */
+
+#define AT91SAM9G45_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9G45_ROM_SIZE	SZ_64K		/* Internal ROM size (64Kb) */
+
+#define AT91SAM9G45_LCDC_BASE	0x00500000	/* LCD Controller */
+#define AT91SAM9G45_UDPHS_FIFO	0x00600000	/* USB Device HS controller */
+#define AT91SAM9G45_HCI_BASE	0x00700000	/* USB Host controller (OHCI) */
+#define AT91SAM9G45_EHCI_BASE	0x00800000	/* USB Host controller (EHCI) */
+#define AT91SAM9G45_VDEC_BASE	0x00900000	/* Video Decoder Controller */
+
+#define CONFIG_DRAM_BASE	AT91_CHIPSELECT_6
+
+/*
+ * Cpu Name
+ */
+#define AT91_CPU_NAME	"AT91SAM9G45"
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam9g45_matrix.h b/include/asm-arm/arch-at91/at91sam9g45_matrix.h
new file mode 100644
index 0000000..1620e1b
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9g45_matrix.h
@@ -0,0 +1,153 @@
+/*
+ * Matrix-centric header file for the AT91SAM9M1x family
+ *
+ *  Copyright (C) 2008 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_MATRIX_H
+#define AT91SAM9G45_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9	(AT91_MATRIX + 0x24)	/* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10	(AT91_MATRIX + 0x28)	/* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11	(AT91_MATRIX + 0x2C)	/* Master Configuration Register 11 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+#define			AT91_MATRIX_ULBT_THIRTYTWO	(5 << 0)
+#define			AT91_MATRIX_ULBT_SIXTYFOUR	(6 << 0)
+#define			AT91_MATRIX_ULBT_128		(7 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0x1ff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+#define		AT91_MATRIX_M9PR		(3 << 4)	/* Master 9 Priority (in Register B) */
+#define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
+#define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+#define		AT91_MATRIX_RCB9		(1 << 9)
+#define		AT91_MATRIX_RCB10		(1 << 10)
+#define		AT91_MATRIX_RCB11		(1 << 11)
+
+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x110)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+#define			AT91_MATRIX_DTCM_64		(7 << 4)
+#define		AT91_MATRIX_TCM_NWS		(0x1 << 11)	/* Wait state TCM register */
+#define			AT91_MATRIX_TCM_NO_WS		(0x0 << 11)
+#define			AT91_MATRIX_TCM_ONE_WS		(0x1 << 11)
+
+#define AT91_MATRIX_VIDEO	(AT91_MATRIX + 0x118)	/* Video Mode Configuration Register */
+#define		AT91C_VDEC_SEL			(0x1 <<  0) /* Video Mode Selection */
+#define			AT91C_VDEC_SEL_OFF		(0 << 0)
+#define			AT91C_VDEC_SEL_ON		(1 << 0)
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x128)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI_CS4A_SMC_CF0		(1 << 4)
+#define		AT91_MATRIX_EBI_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI_CS5A_SMC_CF1		(1 << 5)
+#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define			AT91_MATRIX_EBI_DBPU_ON			(0 << 8)
+#define			AT91_MATRIX_EBI_DBPU_OFF		(1 << 8)
+#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
+#define		AT91_MATRIX_EBI_EBI_IOSR	(1 << 17)	/* EBI I/O slew rate selection */
+#define			AT91_MATRIX_EBI_EBI_IOSR_REDUCED	(0 << 17)
+#define			AT91_MATRIX_EBI_EBI_IOSR_NORMAL		(1 << 17)
+#define		AT91_MATRIX_EBI_DDR_IOSR	(1 << 18)	/* DDR2 dedicated port I/O slew rate selection */
+#define			AT91_MATRIX_EBI_DDR_IOSR_REDUCED	(0 << 18)
+#define			AT91_MATRIX_EBI_DDR_IOSR_NORMAL		(1 << 18)
+
+#define AT91_MATRIX_WPMR	(AT91_MATRIX + 0x1E4)	/* Write Protect Mode Register */
+#define		AT91_MATRIX_WPMR_WPEN		(1 << 0)	/* Write Protect ENable */
+#define			AT91_MATRIX_WPMR_WP_WPDIS		(0 << 0)
+#define			AT91_MATRIX_WPMR_WP_WPEN		(1 << 0)
+#define		AT91_MATRIX_WPMR_WPKEY		(0xFFFFFF << 8)	/* Write Protect KEY */
+
+#define AT91_MATRIX_WPSR	(AT91_MATRIX + 0x1E8)	/* Write Protect Status Register */
+#define		AT91_MATRIX_WPSR_WPVS		(1 << 0)	/* Write Protect Violation Status */
+#define			AT91_MATRIX_WPSR_NO_WPV		(0 << 0)
+#define			AT91_MATRIX_WPSR_WPV		(1 << 0)
+#define		AT91_MATRIX_WPSR_WPVSRC		(0xFFFF << 8)	/* Write Protect Violation Source */
+
+#endif
diff --git a/include/asm-arm/arch-at91/clk.h b/include/asm-arm/arch-at91/clk.h
index 6aaf82e..f642dd9 100644
--- a/include/asm-arm/arch-at91/clk.h
+++ b/include/asm-arm/arch-at91/clk.h
@@ -49,6 +49,11 @@ static inline unsigned long get_lcdc_clk_rate(unsigned int dev_id)
 	return get_mck_clk_rate();
 }
 
+static inline unsigned long get_spi_clk_rate(unsigned int dev_id)
+{
+	return get_mck_clk_rate();
+}
+
 static inline unsigned long get_twi_clk_rate(unsigned int dev_id)
 {
 	return get_mck_clk_rate();
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
index 8704106..de06a10 100644
--- a/include/asm-arm/arch-at91/hardware.h
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -23,7 +23,7 @@
 #define AT91_BASE_SPI	AT91SAM9260_BASE_SPI0
 #define AT91_ID_UHP	AT91SAM9260_ID_UHP
 #define AT91_PMC_UHP	AT91SAM926x_PMC_UHP
-#elif defined(CONFIG_AT91SAM9261)
+#elif defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10)
 #include <asm/arch/at91sam9261.h>
 #define AT91_BASE_SPI	AT91SAM9261_BASE_SPI0
 #define AT91_ID_UHP	AT91SAM9261_ID_UHP
@@ -37,6 +37,12 @@
 #include <asm/arch/at91sam9rl.h>
 #define AT91_BASE_SPI	AT91SAM9RL_BASE_SPI
 #define AT91_ID_UHP	AT91SAM9RL_ID_UHP
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+#include <asm/arch/at91sam9g45.h>
+#define AT91_BASE_EMAC  AT91SAM9G45_BASE_EMAC
+#define AT91_BASE_SPI   AT91SAM9G45_BASE_SPI0
+#define AT91_ID_UHP     AT91SAM9G45_ID_UHPHS
+#define AT91_PMC_UHP    AT91SAM926x_PMC_UHP
 #elif defined(CONFIG_AT91CAP9)
 #include <asm/arch/at91cap9.h>
 #define AT91_BASE_SPI	AT91CAP9_BASE_SPI0
diff --git a/include/asm-arm/arch-at91/memory-map.h b/include/asm-arm/arch-at91/memory-map.h
index 8015dad..f605f37 100644
--- a/include/asm-arm/arch-at91/memory-map.h
+++ b/include/asm-arm/arch-at91/memory-map.h
@@ -30,5 +30,6 @@
 #define USART1_BASE AT91_USART1
 #define USART2_BASE AT91_USART2
 #define USART3_BASE (AT91_BASE_SYS + AT91_DBGU)
+#define SPI0_BASE	AT91_BASE_SPI
 
 #endif /* __ASM_ARM_ARCH_MEMORYMAP_H__ */
diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h
index 52dafc2..47679dd 100644
--- a/include/asm-arm/arch-kirkwood/kirkwood.h
+++ b/include/asm-arm/arch-kirkwood/kirkwood.h
@@ -45,7 +45,7 @@
 #define KW_REG_UNDOC_0x1478		(KW_REGISTER(0x1478))
 
 #define KW_UART0_BASE			(KW_REGISTER(0x12000))
-#define KW_UART1_BASE			(KW_REGISTER(0x13000))
+#define KW_UART1_BASE			(KW_REGISTER(0x12100))
 #define KW_MPP_BASE			(KW_REGISTER(0x10000))
 #define KW_GPIO0_BASE			(KW_REGISTER(0x10100))
 #define KW_GPIO1_BASE			(KW_REGISTER(0x10140))
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 5a0885a..2a723dc 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -1952,12 +1952,13 @@ typedef void		(*ExcpHndlr) (void) ;
 #define CKENA_2_USBHOST	(1 << 2)	/* USB Host Unit Clock Enable */
 #define CKENA_1_LCD	(1 << 1)	/* LCD Unit Clock Enable */
 
-#define CKENB_8_1WIRE	((1 << 8) + 32) /* One Wire Interface Unit Clock Enable */
-#define CKENB_7_GPIO	((1 << 7) + 32)	/* GPIO Clock Enable */
-#define CKENB_6_IRQ	((1 << 6) + 32)	/* Interrupt Controller Clock Enable */
-#define CKENB_4_I2C	((1 << 4) + 32)	/* I2C Unit Clock Enable */
-#define CKENB_1_PWM1	((1 << 1) + 32)	/* PWM2 & PWM3 Clock Enable */
-#define CKENB_0_PWM0	((1 << 0) + 32)	/* PWM0 & PWM1 Clock Enable */
+#define CKENB_9_SYSBUS2	(1 << 9)	/* System bus 2 */
+#define CKENB_8_1WIRE	(1 << 8)	/* One Wire Interface Unit Clock Enable */
+#define CKENB_7_GPIO	(1 << 7)	/* GPIO Clock Enable */
+#define CKENB_6_IRQ	(1 << 6)	/* Interrupt Controller Clock Enable */
+#define CKENB_4_I2C	(1 << 4)	/* I2C Unit Clock Enable */
+#define CKENB_1_PWM1	(1 << 1)	/* PWM2 & PWM3 Clock Enable */
+#define CKENB_0_PWM0	(1 << 0)	/* PWM0 & PWM1 Clock Enable */
 
 #else /* if defined CONFIG_CPU_MONAHANS */
 
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 83e05b3..6d24023 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -32,8 +32,11 @@
 #define CONFIG_SYS_HZ		1000
 
 #define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
+#ifdef CONFIG_AT91SAM9G10EK
+#define CONFIG_AT91SAM9G10	1	/* It's an Atmel AT91SAM9G10 SoC*/
+#else
 #define CONFIG_AT91SAM9261	1	/* It's an Atmel AT91SAM9261 SoC*/
-#define CONFIG_AT91SAM9261EK	1	/* on an AT91SAM9261EK Board	*/
+#endif
 #define CONFIG_ARCH_CPU_INIT
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
 
@@ -62,7 +65,11 @@
 #define CONFIG_LCD_INFO_BELOW_LOGO	1
 #define CONFIG_SYS_WHITE_ON_BLACK		1
 #define CONFIG_ATMEL_LCD		1
+#ifdef CONFIG_AT91SAM9261EK
 #define CONFIG_ATMEL_LCD_BGR555		1
+#else
+#define	CONFIG_AT91SAM9G10_LCD_BASE		0x23E00000	/* LCD is no more in SRAM */
+#endif
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
 
 /* LED */
@@ -147,7 +154,11 @@
 #define CONFIG_DOS_PARTITION		1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT		1
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9261_UHP_BASE */
+#ifdef CONFIG_AT91SAM9G10EK
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9g10"
+#else
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9261"
+#endif
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
 #define CONFIG_USB_STORAGE		1
 #define CONFIG_CMD_FAT			1
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
new file mode 100644
index 0000000..572c45b
--- /dev/null
+++ b/include/configs/at91sam9m10g45ek.h
@@ -0,0 +1,225 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES).
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* ARM asynchronous clock */
+#define AT91_MAIN_CLOCK		12000000	/* from 12 MHz crystal */
+#define CONFIG_SYS_HZ		1000
+
+#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
+#ifdef CONFIG_AT91SAM9M10G45EK
+#define CONFIG_AT91SAM9M10G45	1	/* It's an Atmel AT91SAM9M10G45 SoC*/
+#else
+#define CONFIG_AT91SAM9G45	1	/* It's an Atmel AT91SAM9G45 SoC*/
+#endif
+#define CONFIG_ARCH_CPU_INIT
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
+
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG	1
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_ATMEL_USART	1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3		1	/* USART 3 is DBGU */
+
+/* LCD */
+#define CONFIG_LCD			1
+#define LCD_BPP				LCD_COLOR8
+#define CONFIG_LCD_LOGO			1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO			1
+#define CONFIG_LCD_INFO_BELOW_LOGO	1
+#define CONFIG_SYS_WHITE_ON_BLACK		1
+#define CONFIG_ATMEL_LCD		1
+#define CONFIG_ATMEL_LCD_RGB565		1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
+/* board specific(not enough SRAM) */
+#define CONFIG_AT91SAM9G45_LCD_BASE		0x73E00000
+
+/* LED */
+#define CONFIG_AT91_LED
+#define	CONFIG_RED_LED		AT91_PIN_PD31	/* this is the user1 led */
+#define	CONFIG_GREEN_LED	AT91_PIN_PD0	/* this is the user2 led */
+
+#define CONFIG_BOOTDELAY	3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE	1
+#define CONFIG_BOOTP_BOOTPATH		1
+#define CONFIG_BOOTP_GATEWAY		1
+#define CONFIG_BOOTP_HOSTNAME		1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_LOADS
+
+#define CONFIG_CMD_PING		1
+#define CONFIG_CMD_DHCP		1
+#define CONFIG_CMD_NAND		1
+#define CONFIG_CMD_USB		1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			0x70000000
+#define PHYS_SDRAM_SIZE			0x08000000	/* 128 megs */
+
+/* DataFlash */
+#ifdef CONFIG_ATMEL_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_SPI_FLASH		1
+#define CONFIG_SPI_FLASH_ATMEL		1
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS	1
+#endif
+
+/* NOR flash, if populated */
+#ifndef CONFIG_CMD_NAND
+#define CONFIG_SYS_NO_FLASH		1
+#else
+#define CONFIG_SYS_FLASH_CFI		1
+#define CONFIG_FLASH_CFI_DRIVER		1
+#define PHYS_FLASH_1			0x10000000
+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_SECT		256
+#define CONFIG_SYS_MAX_FLASH_BANKS		1
+#endif
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_MAX_CHIPS			1
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE		1
+#define CONFIG_SYS_NAND_BASE			0x40000000
+#define CONFIG_SYS_NAND_DBW_8			1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
+#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC8
+#endif
+
+/* Ethernet */
+#define CONFIG_MACB			1
+#define CONFIG_RMII			1
+#define CONFIG_NET_MULTI		1
+#define CONFIG_NET_RETRY_COUNT		20
+#define CONFIG_RESET_PHY_R		1
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW		1
+#define CONFIG_DOS_PARTITION		1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00700000	/* AT91SAM9G45_UHP_OHCI_BASE */
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9g45"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
+#define CONFIG_USB_STORAGE		1
+
+#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
+
+#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END			0x23e00000
+
+#ifdef CONFIG_SYS_USE_DATAFLASH
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
+#define CONFIG_ENV_IS_IN_SPI_FLASH	1
+#define CONFIG_SYS_MONITOR_BASE	(0xC0000000 + 0x8400)
+#define CONFIG_ENV_OFFSET		0x4200
+#define CONFIG_ENV_ADDR		(0xC0000000 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE		0x4200
+#define CONFIG_ENV_SECT_SIZE		0x10000
+#define CONFIG_BOOTCOMMAND	"cp.b 0xC0042000 0x22000000 0x210000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
+				"root=/dev/mtdblock0 " \
+				"mtdparts=at91_nand:-(root) "\
+				"rw rootfstype=jffs2"
+
+#else /* CONFIG_SYS_USE_NANDFLASH */
+
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_ENV_IS_IN_NAND	1
+#define CONFIG_ENV_OFFSET		0x60000
+#define CONFIG_ENV_OFFSET_REDUND	0x80000
+#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND	"nand read 0x72000000 0x200000 0x200000; bootm"
+#define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
+				"root=/dev/mtdblock5 " \
+				"mtdparts=at91_nand:128k(bootstrap)ro, \
+				256k(uboot)ro,128k(env1)ro,128k(env2)ro, \
+				2M(linux),-(root) " \
+				"rw rootfstype=jffs2"
+
+#endif
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT		"U-Boot> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP		1
+#define CONFIG_CMDLINE_EDITING	1
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+
+#define ROUND(A, B)		(((A) + (B)) & ~((B) - 1))
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
diff --git a/include/configs/versatile.h b/include/configs/versatile.h
index 300271f..a9b70cc 100644
--- a/include/configs/versatile.h
+++ b/include/configs/versatile.h
@@ -39,6 +39,10 @@
 #define CONFIG_VERSATILE	1	/* in Versatile Platform Board	*/
 #define CONFIG_ARCH_VERSATILE	1	/* Specifically, a Versatile	*/
 
+#ifndef CONFIG_ARCH_VERSATILE_AB	/* AB				*/
+#define CONFIG_ARCH_VERSATILE_PB	/* Versatile PB is default	*/
+#endif
+
 #define CONFIG_SYS_MEMTEST_START	0x100000
 #define CONFIG_SYS_MEMTEST_END		0x10000000
 #define CONFIG_SYS_HZ			(1000000 / 256)
@@ -101,7 +105,6 @@
 /*
  * Command line configuration.
  */
-
 #define CONFIG_CMD_BDI
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_FLASH
@@ -132,8 +135,13 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
-#define CONFIG_SYS_PROMPT	"Versatile # "	/* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
+/* Monitor Command Prompt	 */
+#ifdef CONFIG_ARCH_VERSATILE_AB
+# define CONFIG_SYS_PROMPT	"VersatileAB # "
+#else
+# define CONFIG_SYS_PROMPT	"VersatilePB # "
+#endif
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE	\
 			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
@@ -159,13 +167,20 @@
 #define CONFIG_NR_DRAM_BANKS	1	/* we have 1 bank of DRAM */
 #define PHYS_SDRAM_1		0x00000000	/* SDRAM Bank #1 */
 #define PHYS_SDRAM_1_SIZE	0x08000000	/* 128 MB */
-
-#define CONFIG_SYS_FLASH_BASE	0x34000000
+#define PHYS_FLASH_SIZE		0x04000000	/* 64MB */
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-
+/*
+ * Use the CFI flash driver for ease of use
+ */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_ENV_IS_IN_FLASH	1
+/*
+ *	System control register
+ */
 #define VERSATILE_SYS_BASE		0x10000000
 #define VERSATILE_SYS_FLASH_OFFSET	0x4C
 #define VERSATILE_FLASHCTRL		\
@@ -173,19 +188,47 @@
 /* Enable writing to flash */
 #define VERSATILE_FLASHPROG_FLVPPEN	(1 << 0)
 
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define PHYS_FLASH_SIZE			0x34000000	/* 64MB */
 /* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(20 * CONFIG_SYS_HZ) /* Erase Timeout */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(20 * CONFIG_SYS_HZ) /* Write Timeout */
-#define CONFIG_SYS_MAX_FLASH_SECT	(256)
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2 * CONFIG_SYS_HZ) /* Erase Timeout */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2 * CONFIG_SYS_HZ) /* Write Timeout */
+
+/*
+ * Note that CONFIG_SYS_MAX_FLASH_SECT allows for a parameter block
+ * i.e.
+ *	the bottom "sector" (bottom boot), or top "sector"
+ *	(top boot), is a seperate erase region divided into
+ *	4 (equal) smaller sectors. This, notionally, allows
+ *	quicker erase/rewrire of the most frequently changed
+ *	area......
+ *	CONFIG_SYS_MAX_FLASH_SECT is padded up to a multiple of 4
+ */
+
+#ifdef CONFIG_ARCH_VERSATILE_AB
+#define FLASH_SECTOR_SIZE		0x00020000	/* 128 KB sectors */
+#define CONFIG_ENV_SECT_SIZE		(2 * FLASH_SECTOR_SIZE)
+#define CONFIG_SYS_MAX_FLASH_SECT	(520)
+#endif
+
+#ifdef CONFIG_ARCH_VERSATILE_PB		/* Versatile PB is default	*/
+#define FLASH_SECTOR_SIZE		0x00040000	/* 256 KB sectors */
+#define CONFIG_ENV_SECT_SIZE		FLASH_SECTOR_SIZE
+#define CONFIG_SYS_MAX_FLASH_SECT	(260)
+#endif
+
+#define CONFIG_SYS_FLASH_BASE		0x34000000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+
+#define CONFIG_SYS_MONITOR_LEN		(4 * CONFIG_ENV_SECT_SIZE)
+
+/* The ARM Boot Monitor is shipped in the lowest sector of flash */
 
-#define PHYS_FLASH_1			(CONFIG_SYS_FLASH_BASE)
+#define FLASH_TOP			(CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE)
+#define CONFIG_ENV_SIZE			8192
+#define CONFIG_ENV_ADDR			(FLASH_TOP - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_MONITOR_BASE		(CONFIG_ENV_ADDR - CONFIG_SYS_MONITOR_LEN)
 
-#define CONFIG_ENV_IS_IN_FLASH	1		/* env in flash */
-#define CONFIG_ENV_SECT_SIZE	0x00020000	/* 256 KB sectors (x2) */
-#define CONFIG_ENV_SIZE		0x10000		/* Size of Environment */
-#define CONFIG_ENV_OFFSET	0x01f00000	/* environment starts */
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_SYS_FLASH_PROTECTION	/* The devices have real protection */
+#define CONFIG_SYS_FLASH_EMPTY_INFO	/* flinfo indicates empty blocks */
 
-#endif /* __CONFIG_H */
+#endif	/* __CONFIG_H */