summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMarkus Klotzbücher <Markus Klotzbümk@pollux.denx.de>2006-03-04 18:35:51 +0100
committerMarkus Klotzbücher <mk@pollux.denx.de>2006-03-04 18:35:51 +0100
commitbf7cac033b27589c7de71a5f37f0c8e872ad489a (patch)
tree3659e523f106b6484b81681dd2a22d5df4ed5b1f
parentf8785e96c9f7249328b267d4c82e2218748e3729 (diff)
downloadu-boot-imx-bf7cac033b27589c7de71a5f37f0c8e872ad489a.zip
u-boot-imx-bf7cac033b27589c7de71a5f37f0c8e872ad489a.tar.gz
u-boot-imx-bf7cac033b27589c7de71a5f37f0c8e872ad489a.tar.bz2
Lots of new stuff:
* Debug message can be turned on and off. * Waiting for events now times out. * Implemented RESET command. * Added appropriate nand_bbt_descriptor and nand_oobinfo. Remaining Problems: * Read Status still behaves weird an returns invalid stuff sometimes. * ECC Placement does not respect our scheme in nand_oobinfo.
-rw-r--r--board/delta/nand.c251
-rw-r--r--cpu/pxa/start.S2
-rw-r--r--include/configs/delta.h5
3 files changed, 190 insertions, 68 deletions
diff --git a/board/delta/nand.c b/board/delta/nand.c
index bc6d7a4..9f882a5 100644
--- a/board/delta/nand.c
+++ b/board/delta/nand.c
@@ -28,6 +28,41 @@
#include <nand.h>
#include <asm/arch/pxa-regs.h>
+/* mk@tbd move this to pxa-regs */
+#define OSCR_CLK_FREQ 3.250 /* MHz */
+
+#define CFG_DFC_DEBUG1
+#define CFG_DFC_DEBUG2
+
+#ifdef CFG_DFC_DEBUG1
+# define DFC_DEBUG1(fmt, args...) printf(fmt, ##args)
+#else
+# define DFC_DEBUG1(fmt, args...)
+#endif
+
+#ifdef CFG_DFC_DEBUG2
+# define DFC_DEBUG2(fmt, args...) printf(fmt, ##args)
+#else
+# define DFC_DEBUG2(fmt, args...)
+#endif
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr delta_bbt_descr = {
+ .options = 0,
+ .offs = 0,
+ .len = 2,
+ .pattern = scan_ff_pattern
+};
+
+static struct nand_oobinfo delta_oob = {
+ .useecc = MTD_NANDECC_AUTOPLACE,
+ .eccbytes = 6,
+ .eccpos = {2, 3, 4, 5, 6, 7},
+ .oobfree = { {8, 2}, {12, 4} }
+};
+
+
/*
* not required for Monahans DFC
*/
@@ -121,6 +156,9 @@ static void delta_read_buf(struct mtd_info *mtd, u_char* const buf, int len)
return;
}
+/*
+ * read a word. Not implemented as not used in NAND code.
+ */
static u16 delta_read_word(struct mtd_info *mtd)
{
printf("delta_write_byte: UNIMPLEMENTED.\n");
@@ -128,95 +166,139 @@ static u16 delta_read_word(struct mtd_info *mtd)
/* global var, too bad: mk@tbd: move to ->priv pointer */
static unsigned long read_buf = 0;
-static unsigned char bytes_read = 0;
+static int bytes_read = -1;
+/* read a byte from NDDB Because we can only read 4 bytes from NDDB at
+ * a time, we buffer the remaining bytes. The buffer is reset when a
+ * new command is sent to the chip.
+ */
static u_char delta_read_byte(struct mtd_info *mtd)
{
/* struct nand_chip *this = mtd->priv; */
unsigned char byte;
- if(bytes_read == 0) {
+ if(bytes_read < 0) {
read_buf = NDDB;
- printk("delta_read_byte: 0x%x.\n", read_buf);
+ bytes_read = 0;
}
byte = (unsigned char) (read_buf>>(8 * bytes_read++));
if(bytes_read >= 4)
- bytes_read = 0;
+ bytes_read = -1;
- printf("delta_read_byte: returning 0x%x.\n", byte);
+ DFC_DEBUG2("delta_read_byte: byte %u: 0x%x of (0x%x).\n", bytes_read, byte, read_buf);
return byte;
}
-/* delay function */
-static void wait(unsigned long us)
+/* calculate delta between OSCR values start and now */
+static unsigned long get_delta(unsigned long start)
{
-#define OSCR_CLK_FREQ 3.250 /* kHz */
+ unsigned long cur = OSCR;
+
+ if(cur < start) /* OSCR overflowed */
+ return (cur + (start^0xffffffff));
+ else
+ return (cur - start);
+}
+/* delay function, this doesn't belong here */
+static void wait_us(unsigned long us)
+{
unsigned long start = OSCR;
- unsigned long delta = 0, cur;
us *= OSCR_CLK_FREQ;
- while (delta < us) {
- cur = OSCR;
- if(cur < start) /* OSCR overflowed */
- delta = cur + (start^0xffffffff);
- else
- delta = cur - start;
+ while (get_delta(start) < us) {
+ /* do nothing */
}
}
-/* poll the NAND Controller Status Register for event */
-static void delta_wait_event(unsigned long event)
+static void delta_clear_nddb()
+{
+ NDCR &= ~NDCR_ND_RUN;
+ wait_us(CFG_NAND_OTHER_TO);
+}
+
+/* wait_event with timeout */
+static unsigned long delta_wait_event2(unsigned long event)
{
+ unsigned long ndsr, timeout, start = OSCR;
+
if(!event)
- return;
+ return 0xff000000;
+ else if(event & (NDSR_CS0_CMDD | NDSR_CS0_BBD))
+ timeout = CFG_NAND_PROG_ERASE_TO * OSCR_CLK_FREQ;
+ else
+ timeout = CFG_NAND_OTHER_TO * OSCR_CLK_FREQ;
while(1) {
- if(NDSR & event) {
+ ndsr = NDSR;
+ if(ndsr & event) {
NDSR |= event;
break;
}
+ if(get_delta(start) > timeout) {
+ DFC_DEBUG1("delta_wait_event: TIMEOUT waiting for event: 0x%x.\n", event);
+ return 0xff000000;
+ }
+
}
+ return ndsr;
}
-static unsigned long delta_wait_event2(unsigned long event)
+
+#if DEADCODE
+/* poll the NAND Controller Status Register for event */
+static void delta_wait_event(unsigned long event)
{
- unsigned long ndsr;
if(!event)
return;
while(1) {
- ndsr = NDSR;
- if(ndsr & event) {
+ if(NDSR & event) {
NDSR |= event;
break;
}
}
- return ndsr;
}
+#endif
/* we don't always wan't to do this */
static void delta_new_cmd()
{
- /* Clear NDSR */
- NDSR = 0xFFF;
-
- /* apparently NDCR[NDRUN] needs to be set before writing to NDCBx */
- if(!(NDCR & NDCR_ND_RUN)) {
- NDCR |= NDCR_ND_RUN;
+ int retry = 0;
+ unsigned long status;
+
+ while(retry++ <= CFG_NAND_SENDCMD_RETRY) {
+ /* Clear NDSR */
+ NDSR = 0xFFF;
+
+ /* set NDCR[NDRUN] */
+ if(!(NDCR & NDCR_ND_RUN))
+ NDCR |= NDCR_ND_RUN;
- while(1) {
- if(NDSR & NDSR_WRCMDREQ) {
- NDSR |= NDSR_WRCMDREQ; /* Ack */
- break;
- }
+ status = delta_wait_event2(NDSR_WRCMDREQ);
+
+ if(status & NDSR_WRCMDREQ)
+ return;
+
+ DFC_DEBUG2("delta_new_cmd: FAILED to get WRITECMDREQ, retry: %d.\n", retry);
+ delta_clear_nddb();
+ }
+ DFC_DEBUG1("delta_new_cmd: giving up after %d retries.\n", retry);
+
+#if DEADCODE
+ while(1) {
+ if(NDSR & NDSR_WRCMDREQ) {
+ NDSR |= NDSR_WRCMDREQ; /* Ack */
+ break;
}
}
+#endif
+
}
-
+/* this function is called after Programm and Erase Operations to
+ * check for success or failure */
static int delta_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
{
-/* unsigned long timeo; */
unsigned long ndsr=0, event=0;
/* mk@tbd set appropriate timeouts */
@@ -232,12 +314,12 @@ static int delta_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
ndsr = delta_wait_event2(event);
- if(ndsr & NDSR_CS0_BBD)
+ if((ndsr & NDSR_CS0_BBD) || (ndsr & 0xff000000))
return(0x1); /* Status Read error */
return 0;
}
-/* this is really monahans, not board specific ... */
+/* cmdfunc send commands to the DFC */
static void delta_cmdfunc(struct mtd_info *mtd, unsigned command,
int column, int page_addr)
{
@@ -246,7 +328,7 @@ static void delta_cmdfunc(struct mtd_info *mtd, unsigned command,
unsigned long what_the_hack;
/* clear the ugly byte read buffer */
- bytes_read = 0;
+ bytes_read = -1;
read_buf = 0;
/* if command is a double byte cmd, we set bit double cmd bit 19 */
@@ -263,30 +345,30 @@ static void delta_cmdfunc(struct mtd_info *mtd, unsigned command,
((page_addr<<8) & 0xff0000) |
((page_addr<<8) & 0xff000000)); /* make this 0x01000000 ? */
event = NDSR_RDDREQ;
- break;
+ goto write_cmd;
case NAND_CMD_READID:
delta_new_cmd();
- printk("delta_cmdfunc: NAND_CMD_READID.\n");
+ DFC_DEBUG2("delta_cmdfunc: NAND_CMD_READID.\n");
ndcb0 = (NAND_CMD_READID | (3 << 21) | (1 << 16)); /* addr cycles*/
event = NDSR_RDDREQ;
- break;
+ goto write_cmd;
case NAND_CMD_PAGEPROG:
/* sent as a multicommand in NAND_CMD_SEQIN */
- printk("delta_cmdfunc: NAND_CMD_PAGEPROG.\n");
+ DFC_DEBUG2("delta_cmdfunc: NAND_CMD_PAGEPROG empty due to multicmd.\n");
goto end;
case NAND_CMD_ERASE1:
- printf("delta_cmdfunc: NAND_CMD_ERASE1.\n");
+ DFC_DEBUG2("delta_cmdfunc: NAND_CMD_ERASE1.\n");
delta_new_cmd();
ndcb0 = (0xd060 | (1<<25) | (2<<21) | (1<<19) | (3<<16));
ndcb1 = (page_addr & 0x00ffffff);
- break;
+ goto write_cmd;
case NAND_CMD_ERASE2:
- printf("delta_cmdfunc: NAND_CMD_ERASE1 empty due to multicmd.\n");
+ DFC_DEBUG2("delta_cmdfunc: NAND_CMD_ERASE2 empty due to multicmd.\n");
goto end;
case NAND_CMD_SEQIN:
/* send PAGE_PROG command(0x1080) */
delta_new_cmd();
- printf("delta_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG.\n");
+ DFC_DEBUG2("delta_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG.\n");
ndcb0 = (0x1080 | (1<<25) | (1<<21) | (1<<19) | (4<<16));
column >>= 1; /* adjust for 16 bit bus */
ndcb1 = (((column>>1) & 0xff) |
@@ -294,7 +376,7 @@ static void delta_cmdfunc(struct mtd_info *mtd, unsigned command,
((page_addr<<8) & 0xff0000) |
((page_addr<<8) & 0xff000000)); /* make this 0x01000000 ? */
event = NDSR_WRDREQ;
- break;
+ goto write_cmd;
/* case NAND_CMD_SEQIN_pointer_operation: */
/* /\* This is confusing because the command names are */
@@ -329,6 +411,7 @@ static void delta_cmdfunc(struct mtd_info *mtd, unsigned command,
/* event = NDSR_WRDREQ; */
/* break; */
case NAND_CMD_STATUS:
+ DFC_DEBUG2("delta_cmdfunc: NAND_CMD_STATUS.\n");
/* oh, this is not nice. for some reason the real
* status byte is in the second read from the data
* buffer. The hack is to read the first byte right
@@ -336,39 +419,47 @@ static void delta_cmdfunc(struct mtd_info *mtd, unsigned command,
* yields the right one.
*/
delta_new_cmd();
- ndcb0 = (NAND_CMD_STATUS | (4<<21));
+ ndcb0 = NAND_CMD_STATUS | (4<<21);
event = NDSR_RDDREQ;
-/* #define READ_STATUS_BUG 1 */
+#undef READ_STATUS_BUG
#ifdef READ_STATUS_BUG
NDCB0 = ndcb0;
NDCB0 = ndcb1;
NDCB0 = ndcb2;
- delta_wait_event(event);
+ delta_wait_event2(event);
what_the_hack = NDDB;
+ if(what_the_hack != 0xffffffff) {
+ DFC_DEBUG2("what the hack.\n");
+ read_buf = what_the_hack;
+ bytes_read = 0;
+ }
goto end;
#endif
- break;
+ goto write_cmd;
case NAND_CMD_RESET:
- printf("delta_cmdfunc: NAND_CMD_RESET unimplemented.\n");
- break;
+ DFC_DEBUG2("delta_cmdfunc: NAND_CMD_RESET.\n");
+ ndcb0 = NAND_CMD_RESET | (5<<21);
+ event = NDSR_CS0_CMDD;
+ goto write_cmd;
default:
printk("delta_cmdfunc: error, unsupported command.\n");
- return;
+ goto end;
}
+ write_cmd:
NDCB0 = ndcb0;
NDCB0 = ndcb1;
NDCB0 = ndcb2;
wait_event:
- delta_wait_event(event);
+ delta_wait_event2(event);
end:
return;
}
static void delta_dfc_gpio_init()
{
- printf("Setting up DFC GPIO's.\n");
+ DFC_DEBUG2("Setting up DFC GPIO's.\n");
/* no idea what is done here, see zylonite.c */
GPIO4 = 0x1;
@@ -442,14 +533,16 @@ void board_nand_init(struct nand_chip *nand)
#define NAND_TIMING_tCS 0
#define NAND_TIMING_tWH 20
#define NAND_TIMING_tWP 40
-/* #define NAND_TIMING_tRH 20 */
-/* #define NAND_TIMING_tRP 40 */
-#define NAND_TIMING_tRH 25
-#define NAND_TIMING_tRP 50
+#define NAND_TIMING_tRH 20
+#define NAND_TIMING_tRP 40
+
+/* #define NAND_TIMING_tRH 25 */
+/* #define NAND_TIMING_tRP 50 */
#define NAND_TIMING_tR 11123
-#define NAND_TIMING_tWHR 110
+/* #define NAND_TIMING_tWHR 110 */
+#define NAND_TIMING_tWHR 100
#define NAND_TIMING_tAR 10
/* Maximum values for NAND Interface Timing Registers in DFC clock
@@ -468,7 +561,8 @@ void board_nand_init(struct nand_chip *nand)
#define DFC_CLK_PER_US DFC_CLOCK/1000 /* clock period in ns */
#define MIN(x, y) ((x < y) ? x : y)
-
+
+#ifndef CFG_TIMING_TIGHT
tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US) + 1),
DFC_MAX_tCH);
tCS = MIN(((unsigned long) (NAND_TIMING_tCS * DFC_CLK_PER_US) + 1),
@@ -487,9 +581,30 @@ void board_nand_init(struct nand_chip *nand)
DFC_MAX_tWHR);
tAR = MIN(((unsigned long) (NAND_TIMING_tAR * DFC_CLK_PER_US) + 1),
DFC_MAX_tAR);
-
+#else /* this is the tight timing */
+
+ tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US)),
+ DFC_MAX_tCH);
+ tCS = MIN(((unsigned long) (NAND_TIMING_tCS * DFC_CLK_PER_US)),
+ DFC_MAX_tCS);
+ tWH = MIN(((unsigned long) (NAND_TIMING_tWH * DFC_CLK_PER_US)),
+ DFC_MAX_tWH);
+ tWP = MIN(((unsigned long) (NAND_TIMING_tWP * DFC_CLK_PER_US)),
+ DFC_MAX_tWP);
+ tRH = MIN(((unsigned long) (NAND_TIMING_tRH * DFC_CLK_PER_US)),
+ DFC_MAX_tRH);
+ tRP = MIN(((unsigned long) (NAND_TIMING_tRP * DFC_CLK_PER_US)),
+ DFC_MAX_tRP);
+ tR = MIN(((unsigned long) (NAND_TIMING_tR * DFC_CLK_PER_US) - tCH - 2),
+ DFC_MAX_tR);
+ tWHR = MIN(((unsigned long) (NAND_TIMING_tWHR * DFC_CLK_PER_US) - tCH - 2),
+ DFC_MAX_tWHR);
+ tAR = MIN(((unsigned long) (NAND_TIMING_tAR * DFC_CLK_PER_US) - 2),
+ DFC_MAX_tAR);
+#endif /* CFG_TIMING_TIGHT */
+
- printf("tCH=%u, tCS=%u, tWH=%u, tWP=%u, tRH=%u, tRP=%u, tR=%u, tWHR=%u, tAR=%u.\n", tCH, tCS, tWH, tWP, tRH, tRP, tR, tWHR, tAR);
+ DFC_DEBUG2("tCH=%u, tCS=%u, tWH=%u, tWP=%u, tRH=%u, tRP=%u, tR=%u, tWHR=%u, tAR=%u.\n", tCH, tCS, tWH, tWP, tRH, tRP, tR, tWHR, tAR);
/* tRP value is split in the register */
if(tRP & (1 << 4)) {
@@ -548,7 +663,7 @@ void board_nand_init(struct nand_chip *nand)
/* wait 10 us due to cmd buffer clear reset */
-/* wait(10); */
+ /* wait(10); */
nand->hwcontrol = delta_hwcontrol;
@@ -565,6 +680,8 @@ void board_nand_init(struct nand_chip *nand)
nand->write_buf = delta_write_buf;
nand->cmdfunc = delta_cmdfunc;
+ nand->autooob = &delta_oob;
+ nand->badblock_pattern = &delta_bbt_descr;
}
#else
diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S
index 159447e..0eb811f 100644
--- a/cpu/pxa/start.S
+++ b/cpu/pxa/start.S
@@ -189,7 +189,7 @@ cpuspeed: .word CFG_CPUSPEED
#else
#error "You have to define CFG_CPUSPEED!!"
#endif
-
+
/* takes care the CP15 update has taken place */
.macro CPWAIT reg
diff --git a/include/configs/delta.h b/include/configs/delta.h
index ac412ee..99ce0f6 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -173,6 +173,11 @@
/* #define NAND_NO_RB */
#define NAND_DELAY_US 25 /* mk@tbd: could be 0, I guess */
+/* nand timeout values */
+#define CFG_NAND_PROG_ERASE_TO 300
+#define CFG_NAND_OTHER_TO 100
+#define CFG_NAND_SENDCMD_RETRY 3
+
#define ADDR_COLUMN 1
#define ADDR_PAGE 2
#define ADDR_COLUMN_PAGE 3