powerpc: P1025RDB: Separate from P1_P2_RDB_PC in Kconfig

Use TARGET_P1025RDB instead of sharing with P1_P2_RDB_PC to
simplify Kconfig and config macros.

Remove macro CONFIG_P1025RDB.

Signed-off-by: York Sun <york.sun@nxp.com>

11 files changed, 23 insertions, 20 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index a027ea9..632e0f0 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -145,6 +145,11 @@ config TARGET_P1024RDB
 	select SUPPORT_SPL
 	select SUPPORT_TPL
 
+config TARGET_P1025RDB
+	bool "Support P1025RDB"
+	select SUPPORT_SPL
+	select SUPPORT_TPL
+
 config TARGET_P1_P2_RDB_PC
 	bool "Support p1_p2_rdb_pc"
 	select SUPPORT_SPL
diff --git a/board/freescale/p1_p2_rdb_pc/Kconfig b/board/freescale/p1_p2_rdb_pc/Kconfig
index 91ba21e..f02549e 100644
--- a/board/freescale/p1_p2_rdb_pc/Kconfig
+++ b/board/freescale/p1_p2_rdb_pc/Kconfig
@@ -4,7 +4,8 @@ if TARGET_P1_P2_RDB_PC		|| \
 	TARGET_P1020RDB_PD	|| \
 	TARGET_P1020UTM		|| \
 	TARGET_P1021RDB		|| \
-	TARGET_P1024RDB
+	TARGET_P1024RDB		|| \
+	TARGET_P1025RDB
 
 config SYS_BOARD
 	default "p1_p2_rdb_pc"
diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c
index 446935e..44ab123 100644
--- a/board/freescale/p1_p2_rdb_pc/ddr.c
+++ b/board/freescale/p1_p2_rdb_pc/ddr.c
@@ -147,7 +147,7 @@ dimm_params_t ddr_raw_timing = {
 	.tfaw_ps = 37500,
 };
 #elif	defined(CONFIG_TARGET_P1024RDB) || \
-	defined(CONFIG_P1025RDB)
+	defined(CONFIG_TARGET_P1025RDB)
 /*
  * Samsung K4B2G0846C-HCH9
  * The following timing are for "downshift"
diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index 44e8e02..51217c5 100644
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -47,7 +47,7 @@
 #define GPIO_2BIT_MASK		(0x3 << (32 - (GPIO_DDR_RST_PIN + 1) * 2))
 #endif
 
-#if defined(CONFIG_P1025RDB) || defined(CONFIG_TARGET_P1021RDB)
+#if defined(CONFIG_TARGET_P1025RDB) || defined(CONFIG_TARGET_P1021RDB)
 #define PCA_IOPORT_I2C_ADDR		0x23
 #define PCA_IOPORT_OUTPUT_CMD		0x2
 #define PCA_IOPORT_CFG_CMD		0x6
@@ -65,7 +65,7 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
 	{GPIO_GETH_SW_PORT, GPIO_GETH_SW_PIN, 1, 0, 0},	/* RST_GETH_SW_N */
 	{GPIO_SLIC_PORT, GPIO_SLIC_PIN, 1, 0, 0},	/* RST_SLIC_N */
 
-#ifdef CONFIG_P1025RDB
+#ifdef CONFIG_TARGET_P1025RDB
 	/* QE_MUX_MDC */
 	{1,  19, 1, 0, 1}, /* QE_MUX_MDC               */
 
@@ -379,7 +379,7 @@ int board_eth_init(bd_t *bis)
 }
 
 #if defined(CONFIG_QE) && \
-	(defined(CONFIG_P1025RDB) || defined(CONFIG_TARGET_P1021RDB))
+	(defined(CONFIG_TARGET_P1025RDB) || defined(CONFIG_TARGET_P1021RDB))
 static void fdt_board_fixup_qe_pins(void *blob)
 {
 	unsigned int oldbus;
@@ -448,7 +448,7 @@ int ft_board_setup(void *blob, bd_t *bd)
 #ifdef CONFIG_QE
 	do_fixup_by_compat(blob, "fsl,qe", "status", "okay",
 			sizeof("okay"), 0);
-#if defined(CONFIG_P1025RDB) || defined(CONFIG_TARGET_P1021RDB)
+#if defined(CONFIG_TARGET_P1025RDB) || defined(CONFIG_TARGET_P1021RDB)
 	fdt_board_fixup_qe_pins(blob);
 #endif
 #endif
diff --git a/configs/P1025RDB_36BIT_defconfig b/configs/P1025RDB_36BIT_defconfig
index d94c7af..2715182 100644
--- a/configs/P1025RDB_36BIT_defconfig
+++ b/configs/P1025RDB_36BIT_defconfig
@@ -1,12 +1,11 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1025RDB=y
 CONFIG_PHYS_64BIT=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1025RDB"
 CONFIG_BOOTDELAY=10
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
diff --git a/configs/P1025RDB_NAND_defconfig b/configs/P1025RDB_NAND_defconfig
index 0cf5bd2..90e8367 100644
--- a/configs/P1025RDB_NAND_defconfig
+++ b/configs/P1025RDB_NAND_defconfig
@@ -2,12 +2,12 @@ CONFIG_PPC=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1025RDB=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1025RDB,NAND"
+CONFIG_SYS_EXTRA_OPTIONS="NAND"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_TPL=y
diff --git a/configs/P1025RDB_SDCARD_defconfig b/configs/P1025RDB_SDCARD_defconfig
index c9eda77..90b005a 100644
--- a/configs/P1025RDB_SDCARD_defconfig
+++ b/configs/P1025RDB_SDCARD_defconfig
@@ -6,12 +6,12 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1025RDB=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1025RDB,SDCARD"
+CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
diff --git a/configs/P1025RDB_SPIFLASH_defconfig b/configs/P1025RDB_SPIFLASH_defconfig
index a990a5e..0e5335d 100644
--- a/configs/P1025RDB_SPIFLASH_defconfig
+++ b/configs/P1025RDB_SPIFLASH_defconfig
@@ -7,12 +7,12 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1025RDB=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1025RDB,SPIFLASH"
+CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
diff --git a/configs/P1025RDB_defconfig b/configs/P1025RDB_defconfig
index 80e997d..7094db4 100644
--- a/configs/P1025RDB_defconfig
+++ b/configs/P1025RDB_defconfig
@@ -1,11 +1,10 @@
 CONFIG_PPC=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_P1_P2_RDB_PC=y
+CONFIG_TARGET_P1025RDB=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="P1025RDB"
 CONFIG_BOOTDELAY=10
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MMC=y
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index eb88576..6c2fdd1 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -131,7 +131,7 @@
 #define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
-#if defined(CONFIG_P1025RDB)
+#if defined(CONFIG_TARGET_P1025RDB)
 #define CONFIG_BOARDNAME "P1025RDB"
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_P1025
@@ -755,7 +755,7 @@
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #endif /* CONFIG_QE */
 
-#ifdef CONFIG_P1025RDB
+#ifdef CONFIG_TARGET_P1025RDB
 /*
  * QE UEC ethernet configuration
  */
@@ -789,7 +789,7 @@
 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 #define CONFIG_SYS_UEC5_INTERFACE_SPEED	100
 #endif /* CONFIG_UEC_ETH5 */
-#endif /* CONFIG_P1025RDB */
+#endif /* CONFIG_TARGET_P1025RDB */
 
 /*
  * Environment
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 9e630d2..c95daac 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -3387,7 +3387,6 @@ CONFIG_P1020
 CONFIG_P1021
 CONFIG_P1024
 CONFIG_P1025
-CONFIG_P1025RDB
 CONFIG_P2020
 CONFIG_P2020RDB
 CONFIG_P2041RDB