summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorNishanth Menon <nm@ti.com>2012-03-01 14:17:37 +0000
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2012-05-15 08:31:22 +0200
commita78274b2050dcacc29561f4e35bdc91b896578cd (patch)
tree6817722c1ed47b4927e838276b7812c1b99ce205
parentbbbc1ae9219ae8c8098c0af14060da5cb0d37e53 (diff)
downloadu-boot-imx-a78274b2050dcacc29561f4e35bdc91b896578cd.zip
u-boot-imx-a78274b2050dcacc29561f4e35bdc91b896578cd.tar.gz
u-boot-imx-a78274b2050dcacc29561f4e35bdc91b896578cd.tar.bz2
OMAP3+: Introduce generic logic for OMAP voltage controller
OMAP Voltage controller is used to generically talk to PMICs on OMAP3,4,5 over I2C_SR. Instead of replicating code in multiple SoC code, introduce a common voltage controller logic which can be re-used from elsewhere. With this change, we replace setup_sri2c with omap_vc_init which has the same functionality, and replace the voltage scale replication in do_scale_vcore and do_scale_tps62361 with omap_vc_bypass_send_value. omap_vc_bypass_send_value can also now be used with any configuration of PMIC. NOTE: Voltage controller controlling I2C_SR is a write-only data path, so no register read operation can be implemented. Reported-by: Isabelle Gros <i-gros@ti.com> Reported-by: Jerome Angeloni <j-angeloni@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
-rw-r--r--arch/arm/cpu/armv7/omap-common/Makefile1
-rw-r--r--arch/arm/cpu/armv7/omap-common/clocks-common.c48
-rw-r--r--arch/arm/cpu/armv7/omap-common/vc.c138
-rw-r--r--arch/arm/cpu/armv7/omap4/clocks.c2
-rw-r--r--arch/arm/cpu/armv7/omap5/clocks.c2
-rw-r--r--arch/arm/include/asm/arch-omap4/clocks.h15
-rw-r--r--arch/arm/include/asm/arch-omap4/sys_proto.h2
-rw-r--r--arch/arm/include/asm/arch-omap5/clocks.h15
-rw-r--r--arch/arm/include/asm/arch-omap5/sys_proto.h2
9 files changed, 150 insertions, 75 deletions
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index 447fcd5..2a6625f 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -37,6 +37,7 @@ ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
COBJS += hwinit-common.o
COBJS += clocks-common.o
COBJS += emif-common.o
+COBJS += vc.o
endif
ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index 4e74569..90d3156 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -362,27 +362,19 @@ static void setup_non_essential_dplls(void)
void do_scale_tps62361(u32 reg, u32 volt_mv)
{
- u32 temp, step;
+ u32 step;
step = volt_mv - TPS62361_BASE_VOLT_MV;
step /= 10;
- temp = TPS62361_I2C_SLAVE_ADDR |
- (reg << PRM_VC_VAL_BYPASS_REGADDR_SHIFT) |
- (step << PRM_VC_VAL_BYPASS_DATA_SHIFT) |
- PRM_VC_VAL_BYPASS_VALID_BIT;
debug("do_scale_tps62361: volt - %d step - 0x%x\n", volt_mv, step);
-
- writel(temp, &prcm->prm_vc_val_bypass);
- if (!wait_on_value(PRM_VC_VAL_BYPASS_VALID_BIT, 0,
- &prcm->prm_vc_val_bypass, LDELAY)) {
+ if (omap_vc_bypass_send_value(TPS62361_I2C_SLAVE_ADDR, reg, step))
puts("Scaling voltage failed for vdd_mpu from TPS\n");
- }
}
void do_scale_vcore(u32 vcore_reg, u32 volt_mv)
{
- u32 temp, offset_code;
+ u32 offset_code;
u32 step = 12660; /* 12.66 mV represented in uV */
u32 offset = volt_mv;
@@ -400,16 +392,9 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv)
debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv,
offset_code);
-
- temp = SMPS_I2C_SLAVE_ADDR |
- (vcore_reg << PRM_VC_VAL_BYPASS_REGADDR_SHIFT) |
- (offset_code << PRM_VC_VAL_BYPASS_DATA_SHIFT) |
- PRM_VC_VAL_BYPASS_VALID_BIT;
- writel(temp, &prcm->prm_vc_val_bypass);
- if (!wait_on_value(PRM_VC_VAL_BYPASS_VALID_BIT, 0,
- &prcm->prm_vc_val_bypass, LDELAY)) {
+ if (omap_vc_bypass_send_value(SMPS_I2C_SLAVE_ADDR,
+ vcore_reg, offset_code))
printf("Scaling voltage failed for 0x%x\n", vcore_reg);
- }
}
static inline void enable_clock_domain(u32 *const clkctrl_reg, u32 enable_mode)
@@ -529,29 +514,6 @@ void setup_clocks_for_console(void)
CD_CLKCTRL_CLKTRCTRL_SHIFT);
}
-void setup_sri2c(void)
-{
- u32 sys_clk_khz, cycles_hi, cycles_low, temp;
-
- sys_clk_khz = get_sys_clk_freq() / 1000;
-
- /*
- * Setup the dedicated I2C controller for Voltage Control
- * I2C clk - high period 40% low period 60%
- */
- cycles_hi = sys_clk_khz * 4 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10;
- cycles_low = sys_clk_khz * 6 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10;
- /* values to be set in register - less by 5 & 7 respectively */
- cycles_hi -= 5;
- cycles_low -= 7;
- temp = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) |
- (cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT);
- writel(temp, &prcm->prm_vc_cfg_i2c_clk);
-
- /* Disable high speed mode and all advanced features */
- writel(0x0, &prcm->prm_vc_cfg_i2c_mode);
-}
-
void do_enable_clocks(u32 *const *clk_domains,
u32 *const *clk_modules_hw_auto,
u32 *const *clk_modules_explicit_en,
diff --git a/arch/arm/cpu/armv7/omap-common/vc.c b/arch/arm/cpu/armv7/omap-common/vc.c
new file mode 100644
index 0000000..a045b77
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/vc.c
@@ -0,0 +1,138 @@
+/*
+ * Voltage Controller implementation for OMAP
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Nishanth Menon
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/arch/sys_proto.h>
+
+/*
+ * Define Master code if there are multiple masters on the I2C_SR bus.
+ * Normally not required
+ */
+#ifndef CONFIG_OMAP_VC_I2C_HS_MCODE
+#define CONFIG_OMAP_VC_I2C_HS_MCODE 0x0
+#endif
+
+/* Register defines and masks for VC IP Block */
+/* PRM_VC_CFG_I2C_MODE */
+#define PRM_VC_CFG_I2C_MODE_DFILTEREN_BIT (0x1 << 6)
+#define PRM_VC_CFG_I2C_MODE_SRMODEEN_BIT (0x1 << 4)
+#define PRM_VC_CFG_I2C_MODE_HSMODEEN_BIT (0x1 << 3)
+#define PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT 0x0
+#define PRM_VC_CFG_I2C_MODE_HSMCODE_MASK 0x3
+
+/* PRM_VC_CFG_I2C_CLK */
+#define PRM_VC_CFG_I2C_CLK_HSCLL_SHIFT 24
+#define PRM_VC_CFG_I2C_CLK_HSCLL_MASK 0xFF
+#define PRM_VC_CFG_I2C_CLK_HSCLH_SHIFT 16
+#define PRM_VC_CFG_I2C_CLK_HSCLH_MASK 0xFF
+#define PRM_VC_CFG_I2C_CLK_SCLH_SHIFT 0
+#define PRM_VC_CFG_I2C_CLK_SCLH_MASK 0xFF
+#define PRM_VC_CFG_I2C_CLK_SCLL_SHIFT 8
+#define PRM_VC_CFG_I2C_CLK_SCLL_MASK (0xFF << 8)
+
+/* PRM_VC_VAL_BYPASS */
+#define PRM_VC_VAL_BYPASS_VALID_BIT (0x1 << 24)
+#define PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT 0
+#define PRM_VC_VAL_BYPASS_SLAVEADDR_MASK 0x7F
+#define PRM_VC_VAL_BYPASS_REGADDR_SHIFT 8
+#define PRM_VC_VAL_BYPASS_REGADDR_MASK 0xFF
+#define PRM_VC_VAL_BYPASS_DATA_SHIFT 16
+#define PRM_VC_VAL_BYPASS_DATA_MASK 0xFF
+
+/**
+ * omap_vc_init() - Initialization for Voltage controller
+ * @speed_khz: I2C buspeed in KHz
+ */
+void omap_vc_init(u16 speed_khz)
+{
+ u32 val;
+ u32 sys_clk_khz, cycles_hi, cycles_low;
+
+ sys_clk_khz = get_sys_clk_freq() / 1000;
+
+ if (speed_khz > 400) {
+ puts("higher speed requested - throttle to 400Khz\n");
+ speed_khz = 400;
+ }
+
+ /*
+ * Setup the dedicated I2C controller for Voltage Control
+ * I2C clk - high period 40% low period 60%
+ */
+ speed_khz /= 10;
+ cycles_hi = sys_clk_khz * 4 / speed_khz;
+ cycles_low = sys_clk_khz * 6 / speed_khz;
+ /* values to be set in register - less by 5 & 7 respectively */
+ cycles_hi -= 5;
+ cycles_low -= 7;
+ val = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) |
+ (cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT);
+ writel(val, &prcm->prm_vc_cfg_i2c_clk);
+
+ val = CONFIG_OMAP_VC_I2C_HS_MCODE <<
+ PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT;
+ /* No HS mode for now */
+ val &= ~PRM_VC_CFG_I2C_MODE_HSMODEEN_BIT;
+ writel(val, &prcm->prm_vc_cfg_i2c_mode);
+}
+
+/**
+ * omap_vc_bypass_send_value() - Send a data using VC Bypass command
+ * @sa: 7 bit I2C slave address of the PMIC
+ * @reg_addr: I2C register address(8 bit) address in PMIC
+ * @reg_data: what 8 bit data to write
+ */
+int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data)
+{
+ /*
+ * Unfortunately we need to loop here instead of a defined time
+ * use arbitary large value
+ */
+ u32 timeout = 0xFFFF;
+ u32 reg_val;
+
+ sa &= PRM_VC_VAL_BYPASS_SLAVEADDR_MASK;
+ reg_addr &= PRM_VC_VAL_BYPASS_REGADDR_MASK;
+ reg_data &= PRM_VC_VAL_BYPASS_DATA_MASK;
+
+ /* program VC to send data */
+ reg_val = sa << PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT |
+ reg_addr << PRM_VC_VAL_BYPASS_REGADDR_SHIFT |
+ reg_data << PRM_VC_VAL_BYPASS_DATA_SHIFT;
+ writel(reg_val, &prcm->prm_vc_val_bypass);
+
+ /* Signal VC to send data */
+ writel(reg_val | PRM_VC_VAL_BYPASS_VALID_BIT, &prcm->prm_vc_val_bypass);
+
+ /* Wait on VC to complete transmission */
+ do {
+ reg_val = readl(&prcm->prm_vc_val_bypass) &
+ PRM_VC_VAL_BYPASS_VALID_BIT;
+ if (!reg_val)
+ break;
+
+ sdelay(100);
+ } while (--timeout);
+
+ /* Optional: cleanup PRM_IRQSTATUS_Ax */
+ /* In case we can do something about it in future.. */
+ if (!timeout)
+ return -1;
+
+ /* All good.. */
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c
index e2189f7..976cfd5 100644
--- a/arch/arm/cpu/armv7/omap4/clocks.c
+++ b/arch/arm/cpu/armv7/omap4/clocks.c
@@ -275,7 +275,7 @@ void scale_vcores(void)
{
u32 volt, omap_rev;
- setup_sri2c();
+ omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
omap_rev = omap_revision();
/* TPS - supplies vdd_mpu on 4460 */
diff --git a/arch/arm/cpu/armv7/omap5/clocks.c b/arch/arm/cpu/armv7/omap5/clocks.c
index dd882a2..0a614f0 100644
--- a/arch/arm/cpu/armv7/omap5/clocks.c
+++ b/arch/arm/cpu/armv7/omap5/clocks.c
@@ -243,7 +243,7 @@ void scale_vcores(void)
{
u32 volt;
- setup_sri2c();
+ omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ);
/* Enable 1.22V from TPS for vdd_mpu */
volt = 1220;
diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h
index cd304e8..4e93950 100644
--- a/arch/arm/include/asm/arch-omap4/clocks.h
+++ b/arch/arm/include/asm/arch-omap4/clocks.h
@@ -652,23 +652,9 @@ struct omap4_scrm_regs {
#define OMAP_SYS_CLK_IND_38_4_MHZ 6
#define OMAP_32K_CLK_FREQ 32768
-/* PRM_VC_CFG_I2C_CLK */
-#define PRM_VC_CFG_I2C_CLK_SCLH_SHIFT 0
-#define PRM_VC_CFG_I2C_CLK_SCLH_MASK 0xFF
-#define PRM_VC_CFG_I2C_CLK_SCLL_SHIFT 8
-#define PRM_VC_CFG_I2C_CLK_SCLL_MASK (0xFF << 8)
-
/* PRM_VC_VAL_BYPASS */
#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400
-#define PRM_VC_VAL_BYPASS_VALID_BIT 0x1000000
-#define PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT 0
-#define PRM_VC_VAL_BYPASS_SLAVEADDR_MASK 0x7F
-#define PRM_VC_VAL_BYPASS_REGADDR_SHIFT 8
-#define PRM_VC_VAL_BYPASS_REGADDR_MASK 0xFF
-#define PRM_VC_VAL_BYPASS_DATA_SHIFT 16
-#define PRM_VC_VAL_BYPASS_DATA_MASK 0xFF
-
/* SMPS */
#define SMPS_I2C_SLAVE_ADDR 0x12
#define SMPS_REG_ADDR_VCORE1 0x55
@@ -757,7 +743,6 @@ void scale_vcores(void);
void do_scale_tps62361(u32 reg, u32 volt_mv);
u32 omap_ddr_clk(void);
void do_scale_vcore(u32 vcore_reg, u32 volt_mv);
-void setup_sri2c(void);
void setup_post_dividers(u32 *const base, const struct dpll_params *params);
u32 get_sys_clk_index(void);
void enable_basic_clocks(void);
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index b8dbc2c..101eb46 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -55,6 +55,8 @@ u32 omap_sdram_size(void);
u32 cortex_rev(void);
void init_omap_revision(void);
void do_io_settings(void);
+void omap_vc_init(u16 speed_khz);
+int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
/*
* This is used to verify if the configuration header
* was executed by Romcode prior to control of transfer
diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h
index d0e6dd6..28b9ff7 100644
--- a/arch/arm/include/asm/arch-omap5/clocks.h
+++ b/arch/arm/include/asm/arch-omap5/clocks.h
@@ -615,23 +615,9 @@ struct omap5_prcm_regs {
#define OMAP_SYS_CLK_IND_38_4_MHZ 6
#define OMAP_32K_CLK_FREQ 32768
-/* PRM_VC_CFG_I2C_CLK */
-#define PRM_VC_CFG_I2C_CLK_SCLH_SHIFT 0
-#define PRM_VC_CFG_I2C_CLK_SCLH_MASK 0xFF
-#define PRM_VC_CFG_I2C_CLK_SCLL_SHIFT 8
-#define PRM_VC_CFG_I2C_CLK_SCLL_MASK (0xFF << 8)
-
/* PRM_VC_VAL_BYPASS */
#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400
-#define PRM_VC_VAL_BYPASS_VALID_BIT 0x1000000
-#define PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT 0
-#define PRM_VC_VAL_BYPASS_SLAVEADDR_MASK 0x7F
-#define PRM_VC_VAL_BYPASS_REGADDR_SHIFT 8
-#define PRM_VC_VAL_BYPASS_REGADDR_MASK 0xFF
-#define PRM_VC_VAL_BYPASS_DATA_SHIFT 16
-#define PRM_VC_VAL_BYPASS_DATA_MASK 0xFF
-
/* SMPS */
#define SMPS_I2C_SLAVE_ADDR 0x12
#define SMPS_REG_ADDR_VCORE1 0x55
@@ -703,7 +689,6 @@ void scale_vcores(void);
void do_scale_tps62361(u32 reg, u32 volt_mv);
u32 omap_ddr_clk(void);
void do_scale_vcore(u32 vcore_reg, u32 volt_mv);
-void setup_sri2c(void);
void setup_post_dividers(u32 *const base, const struct dpll_params *params);
u32 get_sys_clk_index(void);
void enable_basic_clocks(void);
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index 40a7c57..3b39dbd 100644
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -55,6 +55,8 @@ u32 omap_sdram_size(void);
u32 cortex_rev(void);
void init_omap_revision(void);
void do_io_settings(void);
+void omap_vc_init(u16 speed_khz);
+int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
/*
* This is used to verify if the configuration header