summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorYork Sun <yorksun@freescale.com>2013-03-25 07:39:24 +0000
committerAndy Fleming <afleming@freescale.com>2013-05-24 16:54:09 -0500
commit9cefbd64b2ec2e320109ec41ec5cf476161c2c78 (patch)
tree36fbbbaf87a4659f2b30e156b54ce2419bc0704a
parente79394643b2636b2fc53c8459e813b6feedac0eb (diff)
downloadu-boot-imx-9cefbd64b2ec2e320109ec41ec5cf476161c2c78.zip
u-boot-imx-9cefbd64b2ec2e320109ec41ec5cf476161c2c78.tar.gz
u-boot-imx-9cefbd64b2ec2e320109ec41ec5cf476161c2c78.tar.bz2
powerpc/t4240qds: Add board detail for bdinfo command
Print more detail information including core voltage, RCW source, switch settings, etc. with bdinfo command. Signed-off-by: York Sun <yorksun@freescale.com> CC: Wolfgang Denk <wd@denx.de> CC: Tom Rini <trini@ti.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
-rw-r--r--board/freescale/t4qds/t4qds.c100
1 files changed, 100 insertions, 0 deletions
diff --git a/board/freescale/t4qds/t4qds.c b/board/freescale/t4qds/t4qds.c
index be6d1c4..d521008 100644
--- a/board/freescale/t4qds/t4qds.c
+++ b/board/freescale/t4qds/t4qds.c
@@ -643,6 +643,106 @@ void ft_board_setup(void *blob, bd_t *bd)
}
/*
+ * This function is called by bdinfo to print detail board information.
+ * As an exmaple for future board, we organize the messages into
+ * several sections. If applicable, the message is in the format of
+ * <name> = <value>
+ * It should aligned with normal output of bdinfo command.
+ *
+ * Voltage: Core, DDR and another configurable voltages
+ * Clock : Critical clocks which are not printed already
+ * RCW : RCW source if not printed already
+ * Misc : Other important information not in above catagories
+ */
+void board_detail(void)
+{
+ int i;
+ u8 brdcfg[16], dutcfg[16], rst_ctl;
+ int vdd, rcwsrc;
+ static const char * const clk[] = {"66.67", "100", "125", "133.33"};
+
+ for (i = 0; i < 16; i++) {
+ brdcfg[i] = qixis_read(offsetof(struct qixis, brdcfg[0]) + i);
+ dutcfg[i] = qixis_read(offsetof(struct qixis, dutcfg[0]) + i);
+ }
+
+ /* Voltage secion */
+ if (!select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR)) {
+ vdd = read_voltage();
+ if (vdd > 0)
+ printf("Core voltage= %d mV\n", vdd);
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+ }
+
+ printf("XVDD = 1.%d V\n", ((brdcfg[8] & 0xf) - 4) * 5 + 25);
+
+ /* clock section */
+ printf("SYSCLK = %s MHz\nDDRCLK = %s MHz\n",
+ clk[(brdcfg[11] >> 2) & 0x3], clk[brdcfg[11] & 3]);
+
+ /* RCW section */
+ rcwsrc = (dutcfg[0] << 1) + (dutcfg[1] & 1);
+ puts("RCW source = ");
+ switch (rcwsrc) {
+ case 0x017:
+ case 0x01f:
+ puts("8-bit NOR\n");
+ break;
+ case 0x027:
+ case 0x02F:
+ puts("16-bit NOR\n");
+ break;
+ case 0x040:
+ puts("SDHC/eMMC\n");
+ break;
+ case 0x044:
+ puts("SPI 16-bit addressing\n");
+ break;
+ case 0x045:
+ puts("SPI 24-bit addressing\n");
+ break;
+ case 0x048:
+ puts("I2C normal addressing\n");
+ break;
+ case 0x049:
+ puts("I2C extended addressing\n");
+ break;
+ case 0x108:
+ case 0x109:
+ case 0x10a:
+ case 0x10b:
+ puts("8-bit NAND, 2KB\n");
+ break;
+ default:
+ if ((rcwsrc >= 0x080) && (rcwsrc <= 0x09f))
+ puts("Hard-coded RCW\n");
+ else if ((rcwsrc >= 0x110) && (rcwsrc <= 0x11f))
+ puts("8-bit NAND, 4KB\n");
+ else
+ puts("unknown\n");
+ break;
+ }
+
+ /* Misc section */
+ rst_ctl = QIXIS_READ(rst_ctl);
+ puts("HRESET_REQ = ");
+ switch (rst_ctl & 0x30) {
+ case 0x00:
+ puts("Ignored\n");
+ break;
+ case 0x10:
+ puts("Assert HRESET\n");
+ break;
+ case 0x30:
+ puts("Reset system\n");
+ break;
+ default:
+ puts("N/A\n");
+ break;
+ }
+}
+
+/*
* Reverse engineering switch settings.
* Some bits cannot be figured out. They will be displayed as
* underscore in binary format. mask[] has those bits.