summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAkshay Bhat <akshay.bhat@timesys.com>2016-04-12 18:13:56 -0400
committerStefano Babic <sbabic@denx.de>2016-04-19 16:05:12 +0200
commit90d7cc42b31251548b3cfb0e65a266020159784d (patch)
treef303b4c7d6f76602b577b3a0acacac679035bcc1
parent0297bd1106bc59f46ba4401bb50a0cdc9afc9faa (diff)
downloadu-boot-imx-90d7cc42b31251548b3cfb0e65a266020159784d.zip
u-boot-imx-90d7cc42b31251548b3cfb0e65a266020159784d.tar.gz
u-boot-imx-90d7cc42b31251548b3cfb0e65a266020159784d.tar.bz2
imx: mx6: Fix procedure to switch the parent of LDB_DI_CLK
Due to incorrect placement of the clock gate cell in the ldb_di[x]_clk tree, the glitchy parent mux of ldb_di[x]_clk can cause a glitch to enter the ldb_di_ipu_div divider. If the divider gets locked up, no ldb_di[x]_clk is generated, and the LVDS display will hang when the ipu_di_clk is sourced from ldb_di_clk. To fix the problem, both the new and current parent of the ldb_di_clk should be disabled before the switch. This patch ensures that correct steps are followed when ldb_di_clk parent is switched in the beginning of boot. This patch was ported from the 3.10.17 NXP kernel http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/commit/?h=imx_3.10.17_1.0.1_ga&id=eecbe9a52587cf9eec30132fb9b8a6761f3a1e6d NXP errata number: ERR009219, EB821 Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
-rw-r--r--arch/arm/cpu/armv7/mx6/clock.c151
-rw-r--r--arch/arm/include/asm/arch-mx6/clock.h9
2 files changed, 160 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index 3b53842..e6f2275 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -1217,6 +1217,157 @@ void enable_ipu_clock(void)
}
}
#endif
+
+#if defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) || defined(CONFIG_MX6DL) || \
+ defined(CONFIG_MX6S)
+static void disable_ldb_di_clock_sources(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ int reg;
+
+ /* Make sure PFDs are disabled at boot. */
+ reg = readl(&mxc_ccm->analog_pfd_528);
+ /* Cannot disable pll2_pfd2_396M, as it is the MMDC clock in iMX6DL */
+ if (is_cpu_type(MXC_CPU_MX6DL))
+ reg |= 0x80008080;
+ else
+ reg |= 0x80808080;
+ writel(reg, &mxc_ccm->analog_pfd_528);
+
+ /* Disable PLL3 PFDs */
+ reg = readl(&mxc_ccm->analog_pfd_480);
+ reg |= 0x80808080;
+ writel(reg, &mxc_ccm->analog_pfd_480);
+
+ /* Disable PLL5 */
+ reg = readl(&mxc_ccm->analog_pll_video);
+ reg &= ~(1 << 13);
+ writel(reg, &mxc_ccm->analog_pll_video);
+}
+
+static void enable_ldb_di_clock_sources(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ int reg;
+
+ reg = readl(&mxc_ccm->analog_pfd_528);
+ if (is_cpu_type(MXC_CPU_MX6DL))
+ reg &= ~(0x80008080);
+ else
+ reg &= ~(0x80808080);
+ writel(reg, &mxc_ccm->analog_pfd_528);
+
+ reg = readl(&mxc_ccm->analog_pfd_480);
+ reg &= ~(0x80808080);
+ writel(reg, &mxc_ccm->analog_pfd_480);
+}
+
+/*
+ * Try call this function as early in the boot process as possible since the
+ * function temporarily disables PLL2 PFD's, PLL3 PFD's and PLL5.
+ */
+void select_ldb_di_clock_source(enum ldb_di_clock clk)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ int reg;
+
+ /*
+ * Need to follow a strict procedure when changing the LDB
+ * clock, else we can introduce a glitch. Things to keep in
+ * mind:
+ * 1. The current and new parent clocks must be disabled.
+ * 2. The default clock for ldb_dio_clk is mmdc_ch1 which has
+ * no CG bit.
+ * 3. In the RTL implementation of the LDB_DI_CLK_SEL mux
+ * the top four options are in one mux and the PLL3 option along
+ * with another option is in the second mux. There is third mux
+ * used to decide between the first and second mux.
+ * The code below switches the parent to the bottom mux first
+ * and then manipulates the top mux. This ensures that no glitch
+ * will enter the divider.
+ *
+ * Need to disable MMDC_CH1 clock manually as there is no CG bit
+ * for this clock. The only way to disable this clock is to move
+ * it to pll3_sw_clk and then to disable pll3_sw_clk
+ * Make sure periph2_clk2_sel is set to pll3_sw_clk
+ */
+
+ /* Disable all ldb_di clock parents */
+ disable_ldb_di_clock_sources();
+
+ /* Set MMDC_CH1 mask bit */
+ reg = readl(&mxc_ccm->ccdr);
+ reg |= MXC_CCM_CCDR_MMDC_CH1_HS_MASK;
+ writel(reg, &mxc_ccm->ccdr);
+
+ /* Set periph2_clk2_sel to be sourced from PLL3_sw_clk */
+ reg = readl(&mxc_ccm->cbcmr);
+ reg &= ~MXC_CCM_CBCMR_PERIPH2_CLK2_SEL;
+ writel(reg, &mxc_ccm->cbcmr);
+
+ /*
+ * Set the periph2_clk_sel to the top mux so that
+ * mmdc_ch1 is from pll3_sw_clk.
+ */
+ reg = readl(&mxc_ccm->cbcdr);
+ reg |= MXC_CCM_CBCDR_PERIPH2_CLK_SEL;
+ writel(reg, &mxc_ccm->cbcdr);
+
+ /* Wait for the clock switch */
+ while (readl(&mxc_ccm->cdhipr))
+ ;
+ /* Disable pll3_sw_clk by selecting bypass clock source */
+ reg = readl(&mxc_ccm->ccsr);
+ reg |= MXC_CCM_CCSR_PLL3_SW_CLK_SEL;
+ writel(reg, &mxc_ccm->ccsr);
+
+ /* Set the ldb_di0_clk and ldb_di1_clk to 111b */
+ reg = readl(&mxc_ccm->cs2cdr);
+ reg |= ((7 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET)
+ | (7 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET));
+ writel(reg, &mxc_ccm->cs2cdr);
+
+ /* Set the ldb_di0_clk and ldb_di1_clk to 100b */
+ reg = readl(&mxc_ccm->cs2cdr);
+ reg &= ~(MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK
+ | MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK);
+ reg |= ((4 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET)
+ | (4 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET));
+ writel(reg, &mxc_ccm->cs2cdr);
+
+ /* Set the ldb_di0_clk and ldb_di1_clk to desired source */
+ reg = readl(&mxc_ccm->cs2cdr);
+ reg &= ~(MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK
+ | MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK);
+ reg |= ((clk << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET)
+ | (clk << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET));
+ writel(reg, &mxc_ccm->cs2cdr);
+
+ /* Unbypass pll3_sw_clk */
+ reg = readl(&mxc_ccm->ccsr);
+ reg &= ~MXC_CCM_CCSR_PLL3_SW_CLK_SEL;
+ writel(reg, &mxc_ccm->ccsr);
+
+ /*
+ * Set the periph2_clk_sel back to the bottom mux so that
+ * mmdc_ch1 is from its original parent.
+ */
+ reg = readl(&mxc_ccm->cbcdr);
+ reg &= ~MXC_CCM_CBCDR_PERIPH2_CLK_SEL;
+ writel(reg, &mxc_ccm->cbcdr);
+
+ /* Wait for the clock switch */
+ while (readl(&mxc_ccm->cdhipr))
+ ;
+ /* Clear MMDC_CH1 mask bit */
+ reg = readl(&mxc_ccm->ccdr);
+ reg &= ~MXC_CCM_CCDR_MMDC_CH1_HS_MASK;
+ writel(reg, &mxc_ccm->ccdr);
+
+ enable_ldb_di_clock_sources();
+}
+#endif
+
/***************************************************/
U_BOOT_CMD(
diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h
index 1450523..82f9f92 100644
--- a/arch/arm/include/asm/arch-mx6/clock.h
+++ b/arch/arm/include/asm/arch-mx6/clock.h
@@ -42,6 +42,14 @@ enum mxc_clock {
MXC_I2C_CLK,
};
+enum ldb_di_clock {
+ MXC_PLL5_CLK = 0,
+ MXC_PLL2_PFD0_CLK,
+ MXC_PLL2_PFD2_CLK,
+ MXC_MMDC_CH1_CLK,
+ MXC_PLL3_SW_CLK,
+};
+
enum enet_freq {
ENET_25MHZ,
ENET_50MHZ,
@@ -70,4 +78,5 @@ int enable_lcdif_clock(u32 base_addr);
void enable_qspi_clk(int qspi_num);
void enable_thermal_clk(void);
void mxs_set_lcdclk(u32 base_addr, u32 freq);
+void select_ldb_di_clock_source(enum ldb_di_clock clk);
#endif /* __ASM_ARCH_CLOCK_H */