Merge branch 'merge' of git://www.denx.de/git/u-boot-microblaze

9 files changed, 64 insertions, 52 deletions

diff --git a/common/cmd_mfsl.c b/common/cmd_mfsl.c
index 8d4c1a3..9d1d875 100644
--- a/common/cmd_mfsl.c
+++ b/common/cmd_mfsl.c
@@ -355,19 +355,18 @@ int do_rspr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	unsigned int reg = 0;
 	unsigned int val = 0;
 
-	reg = (unsigned int)simple_strtoul (argv[1], NULL, 16);
-	val = (unsigned int)simple_strtoul (argv[2], NULL, 16);
-	if (argc < 1) {
+	if (argc < 2) {
 		printf ("Usage:\n%s\n", cmdtp->usage);
 		return 1;
 	}
+	reg = (unsigned int)simple_strtoul (argv[1], NULL, 16);
+	val = (unsigned int)simple_strtoul (argv[2], NULL, 16);
 	switch (reg) {
 	case 0x1:
 		if (argc > 2) {
 			MTS (val, rmsr);
 			NOP;
 			MFS (val, rmsr);
-
 		} else {
 			MFS (val, rmsr);
 		}
@@ -382,6 +381,7 @@ int do_rspr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		puts ("ESR");
 		break;
 	default:
+		puts ("Unsupported register\n");
 		return 1;
 	}
 	printf (": 0x%08lx\n", val);
@@ -408,10 +408,10 @@ U_BOOT_CMD (fwr, 4, 1, do_fwr,
 		" 3 - blocking control write\n");
 
 U_BOOT_CMD (rspr, 3, 1, do_rspr,
-		"rmsr    - read/write special purpose register\n",
+		"rspr    - read/write special purpose register\n",
 		"- reg_num [write value] read/write special purpose register\n"
-		" 0 - MSR - Machine status register\n"
-		" 1 - EAR - Exception address register\n"
-		" 2 - ESR - Exception status register\n");
+		" 1 - MSR - Machine status register\n"
+		" 3 - EAR - Exception address register\n"
+		" 5 - ESR - Exception status register\n");
 
 #endif
diff --git a/cpu/microblaze/cache.c b/cpu/microblaze/cache.c
index 6ce0b55..4b7866f 100644
--- a/cpu/microblaze/cache.c
+++ b/cpu/microblaze/cache.c
@@ -1,7 +1,7 @@
 /*
  * (C) Copyright 2007 Michal Simek
  *
- * Michal SIMEK <moonstr@monstr.eu>
+ * Michal SIMEK <monstr@monstr.eu>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
diff --git a/cpu/microblaze/start.S b/cpu/microblaze/start.S
index 3c027ff..8740284 100644
--- a/cpu/microblaze/start.S
+++ b/cpu/microblaze/start.S
@@ -33,15 +33,13 @@ _start:
 	addi	r1, r0, CFG_INIT_SP_OFFSET
 	addi	r1, r1, -4	/* Decrement SP to top of memory */
 	/* add opcode instruction for 32bit jump - 2 instruction imm & brai*/
-	addi	r6, r0, 0xb000	/* hex b000 opcode imm */
-	bslli	r6, r6, 16	/* shift */
+	addi	r6, r0, 0xb0000000	/* hex b000 opcode imm */
 	swi	r6, r0, 0x0	/* reset address */
 	swi	r6, r0, 0x8	/* user vector exception */
 	swi	r6, r0, 0x10	/* interrupt */
 	swi	r6, r0, 0x20	/* hardware exception */
 
-	addi	r6, r0, 0xb808	/* hew b808 opcode brai*/
-	bslli	r6, r6, 16
+	addi	r6, r0, 0xb8080000	/* hew b808 opcode brai*/
 	swi	r6, r0, 0x4	/* reset address */
 	swi	r6, r0, 0xC	/* user vector exception */
 	swi	r6, r0, 0x14	/* interrupt */
diff --git a/cpu/microblaze/timer.c b/cpu/microblaze/timer.c
index ab1cb12..b350453 100644
--- a/cpu/microblaze/timer.c
+++ b/cpu/microblaze/timer.c
@@ -33,10 +33,17 @@ void reset_timer (void)
 	timestamp = 0;
 }
 
+#ifdef CFG_TIMER_0
 ulong get_timer (ulong base)
 {
 	return (timestamp - base);
 }
+#else
+ulong get_timer (ulong base)
+{
+	return (timestamp++ - base);
+}
+#endif
 
 void set_timer (ulong t)
 {
diff --git a/drivers/serial_xuartlite.c b/drivers/serial_xuartlite.c
index ed59abe..d678ab6 100644
--- a/drivers/serial_xuartlite.c
+++ b/drivers/serial_xuartlite.c
@@ -24,7 +24,7 @@
 
 #include <config.h>
 
-#ifdef	CONFIG_MICROBLAZE
+#ifdef	CONFIG_XILINX_UARTLITE
 
 #include <asm/serial_xuartlite.h>
 
diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 7eeae70..b320438 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -1,7 +1,7 @@
 /*
- * (C) Copyright 2007 Czech Technical University.
+ * (C) Copyright 2007 Michal Simek
  *
- * Michal SIMEK <monstr@seznam.cz>
+ * Michal SIMEK <monstr@monstr.eu>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -32,6 +32,7 @@
 #define	CONFIG_ML401		1	/* ML401 Board */
 
 /* uart */
+#define	CONFIG_XILINX_UARTLITE
 #define	CONFIG_SERIAL_BASE	XILINX_UART_BASEADDR
 #define	CONFIG_BAUDRATE		XILINX_UART_BAUDRATE
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
@@ -58,6 +59,7 @@
 #define	CFG_TIMER_0_IRQ		XILINX_TIMER_IRQ
 #define	FREQUENCE		XILINX_CLOCK_FREQ
 #define	CFG_TIMER_0_PRELOAD	( FREQUENCE/1000 )
+#define	CONFIG_XILINX_CLOCK_FREQ	XILINX_CLOCK_FREQ
 
 /* FSL */
 #define	CFG_FSL_2
@@ -86,7 +88,7 @@
  * 0x11FB_F000	CFG_MONITOR_BASE
  *					MONITOR_CODE	256kB	Env
  * 0x13FF_F000	CFG_GBL_DATA_OFFSET
- * 					GLOBAL_DATA	4kB	bd, gd
+ *					GLOBAL_DATA	4kB	bd, gd
  * 0x1400_0000	CFG_SDRAM_BASE + CFG_SDRAM_SIZE
  */
 
@@ -99,7 +101,7 @@
 /* global pointer */
 #define	CFG_GBL_DATA_SIZE	0x1000	/* size of global data */
 /* start of global data */
-#define	CFG_GBL_DATA_OFFSET     (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
+#define	CFG_GBL_DATA_OFFSET	(CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
 
 /* monitor code */
 #define	SIZE			0x40000
@@ -145,6 +147,16 @@
 	#define	CFG_FLASH_PROTECTION		/* hardware flash protection */
 #endif /* !FLASH */
 
+/* system ace */
+#ifdef XILINX_SYSACE_BASEADDR
+	#define	CONFIG_SYSTEMACE
+	/* #define DEBUG_SYSTEMACE */
+	#define	SYSTEMACE_CONFIG_FPGA
+	#define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
+	#define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
+	#define	CONFIG_DOS_PARTITION
+#endif
+
 /*
  * BOOTP options
  */
@@ -153,28 +165,21 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_AUTOSCRIPT
-#define CONFIG_CMD_BDI
 #define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IMI
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
 #define CONFIG_CMD_MFSL
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
+
+#if defined(CONFIG_SYSTEMACE)
+	#define CONFIG_CMD_EXT2
+	#define CONFIG_CMD_FAT
+#endif
 
 #if defined(FLASH)
 	#define CONFIG_CMD_ECHO
@@ -186,6 +191,8 @@
 		#define CONFIG_CMD_ENV
 		#define CONFIG_CMD_SAVES
 	#endif
+#else
+	#undef CONFIG_CMD_FLASH
 #endif
 
 #if defined(CONFIG_CMD_JFFS2)
@@ -210,24 +217,16 @@
 #define	CONFIG_BOOTDELAY	30
 #define	CONFIG_BOOTARGS		"root=romfs"
 #define	CONFIG_HOSTNAME		"ml401"
-#define	CONFIG_BOOTCOMMAND 	"base 0;tftp 11000000 image.img;bootm"
+#define	CONFIG_BOOTCOMMAND	"base 0;tftp 11000000 image.img;bootm"
 #define	CONFIG_IPADDR		192.168.0.3
-#define	CONFIG_SERVERIP 	192.168.0.5
-#define	CONFIG_GATEWAYIP 	192.168.0.1
+#define	CONFIG_SERVERIP		192.168.0.5
+#define	CONFIG_GATEWAYIP	192.168.0.1
 #define	CONFIG_ETHADDR		00:E0:0C:00:00:FD
 
 /* architecture dependent code */
 #define	CFG_USR_EXCEP	/* user exception */
 #define CFG_HZ	1000
 
-/* system ace */
-#define	CONFIG_SYSTEMACE
-/* #define DEBUG_SYSTEMACE */
-#define	SYSTEMACE_CONFIG_FPGA
-#define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
-#define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
-#define	CONFIG_DOS_PARTITION
-
 #define	CONFIG_PREBOOT		"echo U-BOOT for ML401;setenv preboot;echo"
 
 #define	CONFIG_EXTRA_ENV_SETTINGS	"unlock=yes\0" /* hardware flash protection */\
diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
index 08ac9cb..020ed02 100644
--- a/include/configs/suzaku.h
+++ b/include/configs/suzaku.h
@@ -48,6 +48,7 @@
 #define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
 #define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - (1024 * 1024))
 
+#define CONFIG_XILINX_UARTLITE
 #define CONFIG_BAUDRATE		115200
 #define CFG_BAUDRATE_TABLE	{ 115200 }
 
@@ -55,21 +56,16 @@
 #define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000
 #define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0)
 
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_ENV
+#undef CONFIG_CMD_MEMORY
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_MISC
 
 #define CFG_UART1_BASE		(0xFFFF2000)
 #define CONFIG_SERIAL_BASE	CFG_UART1_BASE
@@ -108,4 +104,7 @@
 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
+#define XILINX_CLOCK_FREQ	50000000
+#define CONFIG_XILINX_CLOCK_FREQ	XILINX_CLOCK_FREQ
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index 35001d7..b1c0ee6 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007 Czech Technical University.
+ * (C) Copyright 2007 Michal Simek
  *
  * Michal SIMEK <monstr@monstr.eu>
  *
@@ -31,6 +31,7 @@
 #define	CONFIG_XUPV2P		1
 
 /* uart */
+#define CONFIG_XILINX_UARTLITE
 #define	CONFIG_SERIAL_BASE	XILINX_UART_BASEADDR
 #define	CONFIG_BAUDRATE		XILINX_UART_BAUDRATE
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
diff --git a/lib_microblaze/time.c b/lib_microblaze/time.c
index 3fa1b11..b5d8f19 100644
--- a/lib_microblaze/time.c
+++ b/lib_microblaze/time.c
@@ -26,9 +26,17 @@
 
 #include <common.h>
 
+#ifdef CFG_TIMER_0
 void udelay (unsigned long usec)
 {
 	int i;
 	i = get_timer (0);
 	while ((get_timer (0) - i) < (usec / 1000)) ;
 }
+#else
+void udelay (unsigned long usec)
+{
+	unsigned int i;
+	for (i = 0; i < (usec * CONFIG_XILINX_CLOCK_FREQ / 10000000); i++);
+}
+#endif