summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTimur Tabi <timur@freescale.com>2008-02-08 13:15:55 -0600
committerKim Phillips <kim.phillips@freescale.com>2008-03-25 19:16:43 -0500
commit89c7784ed90ba50301eec521144f95111e472906 (patch)
tree6e2ed88c42e80fbc454de5de9337d53c1cfc9ad1
parentb55d98c6d5b8694e560a0e727b14cb6921d7cfcc (diff)
downloadu-boot-imx-89c7784ed90ba50301eec521144f95111e472906.zip
u-boot-imx-89c7784ed90ba50301eec521144f95111e472906.tar.gz
u-boot-imx-89c7784ed90ba50301eec521144f95111e472906.tar.bz2
83xx: Add Vitesse VSC7385 firmware uploading
Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET. Cleaned up the board header files to make selecting the VSC7385 easier to control. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
-rw-r--r--board/freescale/mpc8313erdb/mpc8313erdb.c21
-rw-r--r--board/freescale/mpc8349itx/mpc8349itx.c15
-rw-r--r--board/freescale/mpc837xerdb/mpc837xerdb.c27
-rw-r--r--include/configs/MPC8313ERDB.h88
-rw-r--r--include/configs/MPC8349ITX.h33
-rw-r--r--include/configs/MPC837XERDB.h83
6 files changed, 196 insertions, 71 deletions
diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c
index 42019fb..7cbdb7b 100644
--- a/board/freescale/mpc8313erdb/mpc8313erdb.c
+++ b/board/freescale/mpc8313erdb/mpc8313erdb.c
@@ -28,6 +28,7 @@
#endif
#include <pci.h>
#include <mpc83xx.h>
+#include <vsc7385.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -98,6 +99,26 @@ void pci_init_board(void)
mpc83xx_pci_init(1, reg, warmboot);
}
+/*
+ * Miscellaneous late-boot configurations
+ *
+ * If a VSC7385 microcode image is present, then upload it.
+*/
+int misc_init_r(void)
+{
+ int rc = 0;
+
+#ifdef CONFIG_VSC7385_IMAGE
+ if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE,
+ CONFIG_VSC7385_IMAGE_SIZE)) {
+ puts("Failure uploading VSC7385 microcode.\n");
+ rc = 1;
+ }
+#endif
+
+ return rc;
+}
+
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c
index 972361f..704f963 100644
--- a/board/freescale/mpc8349itx/mpc8349itx.c
+++ b/board/freescale/mpc8349itx/mpc8349itx.c
@@ -25,6 +25,7 @@
#include <mpc83xx.h>
#include <i2c.h>
#include <miiphy.h>
+#include <vsc7385.h>
#ifdef CONFIG_PCI
#include <asm/mpc8349_pci.h>
#include <pci.h>
@@ -177,7 +178,7 @@ int checkboard(void)
*/
int misc_init_f(void)
{
-#ifdef CONFIG_VSC7385
+#ifdef CONFIG_VSC7385_ENET
volatile u32 *vsc7385_cpuctrl;
/* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register. The power up
@@ -239,6 +240,8 @@ int misc_init_f(void)
}
/*
+ * Miscellaneous late-boot configurations
+ *
* Make sure the EEPROM has the HRCW correctly programmed.
* Make sure the RTC is correctly programmed.
*
@@ -250,6 +253,8 @@ int misc_init_f(void)
*
* This function makes sure that the I2C EEPROM is programmed
* correctly.
+ *
+ * If a VSC7385 microcode image is present, then upload it.
*/
int misc_init_r(void)
{
@@ -375,6 +380,14 @@ int misc_init_r(void)
i2c_set_bus_num(orig_bus);
#endif
+#ifdef CONFIG_VSC7385_IMAGE
+ if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE,
+ CONFIG_VSC7385_IMAGE_SIZE)) {
+ puts("Failure uploading VSC7385 microcode.\n");
+ rc = 1;
+ }
+#endif
+
return rc;
}
diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c
index bed0fc3..a3b20b8 100644
--- a/board/freescale/mpc837xerdb/mpc837xerdb.c
+++ b/board/freescale/mpc837xerdb/mpc837xerdb.c
@@ -16,6 +16,8 @@
#include <i2c.h>
#include <asm/io.h>
#include <spd_sdram.h>
+#include <vsc7385.h>
+
#if defined(CFG_DRAM_TEST)
int
@@ -56,11 +58,6 @@ testdram(void)
}
#endif
-int board_early_init_f(void)
-{
- return 0;
-}
-
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
void ddr_enable_ecc(unsigned int dram_size);
#endif
@@ -135,6 +132,26 @@ int checkboard(void)
return 0;
}
+/*
+ * Miscellaneous late-boot configurations
+ *
+ * If a VSC7385 microcode image is present, then upload it.
+*/
+int misc_init_r(void)
+{
+ int rc = 0;
+
+#ifdef CONFIG_VSC7385_IMAGE
+ if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE,
+ CONFIG_VSC7385_IMAGE_SIZE)) {
+ puts("Failure uploading VSC7385 microcode.\n");
+ rc = 1;
+ }
+#endif
+
+ return rc;
+}
+
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index f12a3e6..9576fa5 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -38,6 +38,14 @@
#define CONFIG_PCI
#define CONFIG_83XX_GENERIC_PCI
+#define CONFIG_MISC_INIT_R
+
+/*
+ * On-board devices
+ */
+#define CONFIG_VSC7385_ENET
+
+
#ifdef CFG_66MHZ
#define CONFIG_83XX_CLKIN 66666667 /* in Hz */
#elif defined(CFG_33MHZ)
@@ -65,6 +73,22 @@
#define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
/*
+ * Device configurations
+ */
+
+/* Vitesse 7385 */
+
+#ifdef CONFIG_VSC7385_ENET
+
+#define CONFIG_TSEC2
+
+/* The flash address and size of the VSC7385 firmware image */
+#define CONFIG_VSC7385_IMAGE 0xFE7FE000
+#define CONFIG_VSC7385_IMAGE_SIZE 8192
+
+#endif
+
+/*
* DDR Setup
*/
#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/
@@ -214,19 +238,24 @@
#define CFG_LBLAWBAR1_PRELIM CFG_NAND_BASE
#define CFG_LBLAWAR1_PRELIM 0x8000000E /* 32KB */
+/* local bus read write buffer mapping */
+#define CFG_BR3_PRELIM 0xFA000801 /* map at 0xFA000000 */
+#define CFG_OR3_PRELIM 0xFFFF8FF7 /* 32kB */
+#define CFG_LBLAWBAR3_PRELIM 0xFA000000
+#define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */
+
+/* Vitesse 7385 */
+
#define CFG_VSC7385_BASE 0xF0000000
-#define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */
+#ifdef CONFIG_VSC7385_ENET
+
#define CFG_BR2_PRELIM 0xf0000801 /* VSC7385 Base address */
#define CFG_OR2_PRELIM 0xfffe09ff /* VSC7385, 128K bytes*/
#define CFG_LBLAWBAR2_PRELIM CFG_VSC7385_BASE/* Access window base at VSC7385 base */
#define CFG_LBLAWAR2_PRELIM 0x80000010 /* Access window size 128K */
-/* local bus read write buffer mapping */
-#define CFG_BR3_PRELIM 0xFA000801 /* map at 0xFA000000 */
-#define CFG_OR3_PRELIM 0xFFFF8FF7 /* 32kB */
-#define CFG_LBLAWBAR3_PRELIM 0xFA000000
-#define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */
+#endif
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
@@ -263,13 +292,6 @@
#define CFG_I2C_OFFSET 0x3000
#define CFG_I2C2_OFFSET 0x3100
-/* TSEC */
-#define CFG_TSEC1_OFFSET 0x24000
-#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
-#define CFG_TSEC2_OFFSET 0x25000
-#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
-#define CONFIG_NET_MULTI
-
/*
* General PCI
* Addresses are mapped 1-1.
@@ -288,26 +310,31 @@
#define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
/*
- * TSEC configuration
+ * TSEC
*/
#define CONFIG_TSEC_ENET /* TSEC ethernet support */
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
-#endif
-
-#define CONFIG_GMII 1 /* MII PHY management */
-#define CONFIG_TSEC1 1
+#define CONFIG_NET_MULTI
+#define CONFIG_GMII /* MII PHY management */
+#ifdef CONFIG_TSEC1
+#define CONFIG_HAS_ETH0
#define CONFIG_TSEC1_NAME "TSEC0"
-#define CONFIG_TSEC2 1
+#define CFG_TSEC1_OFFSET 0x24000
+#define TSEC1_PHY_ADDR 0x1c
+#define TSEC1_FLAGS TSEC_GIGABIT
+#define TSEC1_PHYIDX 0
+#endif
+
+#ifdef CONFIG_TSEC2
+#define CONFIG_HAS_ETH1
#define CONFIG_TSEC2_NAME "TSEC1"
-#define TSEC1_PHY_ADDR 0x1c
-#define TSEC2_PHY_ADDR 4
-#define TSEC1_FLAGS TSEC_GIGABIT
-#define TSEC2_FLAGS TSEC_GIGABIT
-#define TSEC1_PHYIDX 0
-#define TSEC2_PHYIDX 0
+#define CFG_TSEC2_OFFSET 0x25000
+#define TSEC2_PHY_ADDR 4
+#define TSEC2_FLAGS TSEC_GIGABIT
+#define TSEC2_PHYIDX 0
+#endif
+
/* Options are: TSEC[0-1] */
#define CONFIG_ETHPRIME "TSEC1"
@@ -496,10 +523,13 @@
*/
#define CONFIG_ENV_OVERWRITE
+#ifdef CONFIG_HAS_ETH0
#define CONFIG_ETHADDR 00:E0:0C:00:95:01
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH0
+#endif
+
+#ifdef CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:E0:0C:00:95:02
+#endif
#define CONFIG_IPADDR 10.0.0.2
#define CONFIG_SERVERIP 10.0.0.1
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 48c2736..0e50186 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -68,12 +68,16 @@
#define CFG_IMMR 0xE0000000 /* The IMMR is relocated to here */
+#define CONFIG_MISC_INIT_F
+#define CONFIG_MISC_INIT_R
-/* On-board devices */
+/*
+ * On-board devices
+ */
#ifdef CONFIG_MPC8349ITX
#define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */
-#define CONFIG_VSC7385 /* The Vitesse 7385 5-port switch */
+#define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */
#endif
#define CONFIG_PCI
@@ -88,9 +92,6 @@
/* I2C */
#ifdef CONFIG_HARD_I2C
-#define CONFIG_MISC_INIT_F
-#define CONFIG_MISC_INIT_R
-
#define CONFIG_FSL_I2C
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_I2C_CMD_TREE
@@ -190,6 +191,18 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CFG_FLASH_SIZE 16 /* FLASH size in MB */
#define CFG_FLASH_SIZE_SHIFT 4 /* log2 of the above value */
+/* Vitesse 7385 */
+
+#ifdef CONFIG_VSC7385_ENET
+
+#define CONFIG_TSEC2
+
+/* The flash address and size of the VSC7385 firmware image */
+#define CONFIG_VSC7385_IMAGE 0xFEFFE000
+#define CONFIG_VSC7385_IMAGE_SIZE 8192
+
+#endif
+
/*
* BRx, ORx, LBLAWBARx, and LBLAWARx
*/
@@ -205,10 +218,10 @@ boards, we say we have two, but don't display a message if we find only one. */
/* Vitesse 7385 */
-#ifdef CONFIG_VSC7385
-
#define CFG_VSC7385_BASE 0xF8000000
+#ifdef CONFIG_VSC7385_ENET
+
#define CFG_BR1_PRELIM (CFG_VSC7385_BASE | BR_PS_8 | BR_V)
#define CFG_OR1_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX | \
@@ -384,7 +397,7 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CONFIG_HAS_ETH1
#define CONFIG_TSEC2_NAME "TSEC1"
#define CFG_TSEC2_OFFSET 0x25000
-#define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */
+
#define TSEC2_PHY_ADDR 4
#define TSEC2_PHYIDX 0
#define TSEC2_FLAGS TSEC_GIGABIT
@@ -619,11 +632,11 @@ boards, we say we have two, but don't display a message if we find only one. */
*/
#define CONFIG_ENV_OVERWRITE
-#ifdef CONFIG_TSEC1
+#ifdef CONFIG_HAS_ETH0
#define CONFIG_ETHADDR 00:E0:0C:00:8C:01
#endif
-#ifdef CONFIG_TSEC2
+#ifdef CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02
#endif
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 1964946..0d79aae 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -32,6 +32,14 @@
#define CONFIG_PCI 1
+#define CONFIG_MISC_INIT_R
+
+/*
+ * On-board devices
+ */
+#define CONFIG_TSEC_ENET /* TSEC Ethernet support */
+#define CONFIG_VSC7385_ENET
+
/*
* System Clock Setup
*/
@@ -118,6 +126,22 @@
#define CFG_IMMR 0xE0000000
/*
+ * Device configurations
+ */
+
+/* Vitesse 7385 */
+
+#ifdef CONFIG_VSC7385_ENET
+
+#define CONFIG_TSEC2
+
+/* The flash address and size of the VSC7385 firmware image */
+#define CONFIG_VSC7385_IMAGE 0xFE7FE000
+#define CONFIG_VSC7385_IMAGE_SIZE 8192
+
+#endif
+
+/*
* DDR Setup
*/
#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */
@@ -251,15 +275,19 @@
#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+/* Vitesse 7385 */
+
#define CFG_VSC7385_BASE 0xF0000000
-/* VSC7385 Gigabit Switch support */
-#define CONFIG_VSC7385_ENET
+#ifdef CONFIG_VSC7385_ENET
+
#define CFG_BR2_PRELIM 0xf0000801 /* Base address */
#define CFG_OR2_PRELIM 0xfffe09ff /* 128K bytes*/
#define CFG_LBLAWBAR2_PRELIM CFG_VSC7385_BASE /* Access Base */
#define CFG_LBLAWAR2_PRELIM 0x80000010 /* Access Size 128K */
+#endif
+
/*
* Serial Port
*/
@@ -324,43 +352,43 @@
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP /* do pci plug-and-play */
-#undef CONFIG_EEPRO100
#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
#endif /* CONFIG_PCI */
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 1
-#endif
-
/*
* TSEC
*/
-#define CONFIG_TSEC_ENET /* TSEC ethernet support */
-#define CFG_TSEC1_OFFSET 0x24000
-#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
-#define CFG_TSEC2_OFFSET 0x25000
-#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
+#ifdef CONFIG_TSEC_ENET
-/*
- * TSEC ethernet configuration
- */
-#define CONFIG_GMII 1 /* MII PHY management */
-#define CONFIG_TSEC1 1
+#define CONFIG_NET_MULTI
+#define CONFIG_GMII /* MII PHY management */
+
+#define CONFIG_TSEC1
+
+#ifdef CONFIG_TSEC1
+#define CONFIG_HAS_ETH0
#define CONFIG_TSEC1_NAME "TSEC0"
-#define CONFIG_TSEC2 1
-#define CONFIG_TSEC2_NAME "TSEC1"
+#define CFG_TSEC1_OFFSET 0x24000
#define TSEC1_PHY_ADDR 2
-#define TSEC2_PHY_ADDR 0x1c
#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
#define TSEC1_PHYIDX 0
-#define TSEC2_PHYIDX 0
+#endif
+#ifdef CONFIG_TSEC2
+#define CONFIG_HAS_ETH1
+#define CONFIG_TSEC2_NAME "TSEC1"
+#define CFG_TSEC2_OFFSET 0x25000
+#define TSEC2_PHY_ADDR 0x1c
+#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_PHYIDX 0
+#endif
/* Options are: TSEC[0-1] */
#define CONFIG_ETHPRIME "TSEC0"
+#endif
+
/*
* Environment
*/
@@ -529,10 +557,13 @@
*/
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_HAS_ETH0 /* add support for "ethaddr" */
-#define CONFIG_ETHADDR 00:04:9f:ef:04:01
-#define CONFIG_HAS_ETH1 /* add support for "eth1addr" */
-#define CONFIG_ETH1ADDR 00:04:9f:ef:04:02
+#ifdef CONFIG_HAS_ETH0
+#define CONFIG_ETHADDR 00:04:9f:ef:04:01
+#endif
+
+#ifdef CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR 00:04:9f:ef:04:02
+#endif
#define CONFIG_IPADDR 10.0.0.2
#define CONFIG_SERVERIP 10.0.0.1