summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorHeiko Schocher <hs@denx.de>2011-07-16 00:06:42 +0000
committerWolfgang Denk <wd@denx.de>2011-07-28 16:52:41 +0200
commit7816f2cf813326505970922021b3ed6490863e78 (patch)
tree759959ef5f03dcc1973038234866aa07c4e2389a
parentb9af6d3d8265e90538c29f7f7871352a30d817c5 (diff)
downloadu-boot-imx-7816f2cf813326505970922021b3ed6490863e78.zip
u-boot-imx-7816f2cf813326505970922021b3ed6490863e78.tar.gz
u-boot-imx-7816f2cf813326505970922021b3ed6490863e78.tar.bz2
mkimage: add UBL header support for booting davinci cpus
creating an u-boot.ubl file, which contains the UBL Header needed for booting from NAND with the RBL from TI. For more information read doc/README.ublimage. Signed-off-by: Heiko Schocher <hs@denx.de>
-rw-r--r--.gitignore1
-rw-r--r--Makefile5
-rw-r--r--common/image.c1
-rw-r--r--doc/README.ublimage141
-rw-r--r--include/image.h1
-rw-r--r--tools/Makefile2
-rw-r--r--tools/mkimage.c2
-rw-r--r--tools/mkimage.h1
-rw-r--r--tools/ublimage.c275
-rw-r--r--tools/ublimage.h103
10 files changed, 532 insertions, 0 deletions
diff --git a/.gitignore b/.gitignore
index 34a2ca9..dbf545f 100644
--- a/.gitignore
+++ b/.gitignore
@@ -33,6 +33,7 @@
/u-boot.sha1
/u-boot.dis
/u-boot.lds
+/u-boot.ubl
#
# Generated files
diff --git a/Makefile b/Makefile
index c9e1053..53bffd0 100644
--- a/Makefile
+++ b/Makefile
@@ -394,6 +394,10 @@ $(obj)u-boot.sha1: $(obj)u-boot.bin
$(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
+$(obj)u-boot.ubl: $(obj)u-boot-nand.bin
+ $(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
+ -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
+
GEN_UBOOT = \
UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
@@ -1102,6 +1106,7 @@ clobber: clean
@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL-y)
@rm -f $(obj)u-boot.kwb
@rm -f $(obj)u-boot.imx
+ @rm -f $(obj)u-boot.ubl
@rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
@rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
diff --git a/common/image.c b/common/image.c
index 5c7d4f4..f175541 100644
--- a/common/image.c
+++ b/common/image.c
@@ -141,6 +141,7 @@ static const table_entry_t uimage_type[] = {
{ IH_TYPE_FLATDT, "flat_dt", "Flat Device Tree", },
{ IH_TYPE_KWBIMAGE, "kwbimage", "Kirkwood Boot Image",},
{ IH_TYPE_IMXIMAGE, "imximage", "Freescale i.MX Boot Image",},
+ { IH_TYPE_UBLIMAGE, "ublimage", "Davinci UBL image",},
{ -1, "", "", },
};
diff --git a/doc/README.ublimage b/doc/README.ublimage
new file mode 100644
index 0000000..add24d6
--- /dev/null
+++ b/doc/README.ublimage
@@ -0,0 +1,141 @@
+---------------------------------------------
+UBL image Boot Image generation using mkimage
+---------------------------------------------
+
+This document describes how to set up an U-Boot image that can be directly
+booted by a DaVinci processor via NAND boot mode, using an UBL header,
+but without need for UBL.
+
+For more details see section 11.2 "ARM ROM Boot Modes" of
+http://focus.ti.com/lit/ug/sprufg5a/sprufg5a.pdf
+
+Command syntax:
+--------------
+./tools/mkimage -l <u-boot_file>
+ to list the UBL image file details
+
+./tools/mkimage -T ublimage \
+ -n <board specific configuration file> \
+ -d <u-boot binary> <output image file>
+
+For example, for the davinci dm365evm board:
+./tools/mkimage -n ./board/davinci/dm365evm/ublimage.cfg \
+ -T ublimage \
+ -d u-boot-nand.bin u-boot.ubl
+
+You can generate the image directly when you compile u-boot with:
+
+$ make u-boot.ubl
+
+The output image can be flashed into the NAND.
+
+Please check the DaVinci documentation for further details.
+
+Board specific configuration file specifications:
+-------------------------------------------------
+1. This file must present in the $(BOARDDIR) and the name should be
+ ublimage.cfg (since this is used in Makefile).
+2. This file can have empty lines and lines starting with "#" as first
+ character to put comments.
+3. This file can have configuration command lines as mentioned below,
+ any other information in this file is treated as invalid.
+
+Configuration command line syntax:
+---------------------------------
+1. Each command line must have two strings, first one command or address
+ and second one data string
+2. Following are the valid command strings and associated data strings:-
+ Command string data string
+ -------------- -----------
+ MODE UBL special mode, on of:
+ safe
+ Example:
+ MODE safe
+
+ ENTRY Entry point address for the user
+ bootloader (absolute address) = TEXT_BASE
+ nand_spl loader.
+ Example:
+ ENTRY 0x00000020
+
+ PAGES Number of pages (size of user bootloader
+ in number of pages)
+ Example:
+ PAGES 27
+
+ START_BLOCK Block number where user bootloader is present
+ Example:
+ START_BLOCK 5
+
+ START_PAGE Page number where user bootloader is present
+ (for RBL always 0)
+ Example:
+ START_PAGE 0
+
+------------------------------------------------
+
+Structure of the u-boot.ubl binary:
+
+compile steps:
+
+1) nand_spl code compile, with pad_to = (TEXT_BASE +
+ (CONFIG_SYS_NROF_PAGES_NAND_SPL * pagesize))
+ Example: cam_enc_4xx pad_to = 0x20 + (6 * 0x800) = 0x3020 = 12320
+ -> u-boot-spl-16k.bin
+
+ !! TEXT_BASE = 0x20, as the RBL starts at 0x20
+
+2) compile u-boot.bin ("normal" u-boot)
+ -> u-boot.bin
+
+3) create u-boot-nand.bin = u-boot-spl-16k.bin + u-boot.bin
+
+4) create u-boot.ubl, size = 1 page size NAND
+ create UBL header and paste it before u-boot.bin
+
+This steps are done automagically if you do a "make all"
+
+-> You get an u-boot.ubl binary, which you can flash
+ into your NAND.
+
+Structure of this binary (Example for the cam_enc_4xx board with a NAND
+page size = 0x800):
+
+offset : 0x00000 | 0x800 | 0x3800
+content: UBL | nand_spl | u-boot code
+ Header | code |
+
+The NAND layout looks for example like this:
+
+(Example for the cam_enc_4xx board with a NAND page size = 0x800, block
+size = 0x20000 and CONFIG_SYS_NROF_UBL_HEADER 5):
+
+offset : 0x80000 | 0xa0000 | 0xa3000
+content: UBL | nand_spl | u-boot code
+ Header | code |
+ ^ ^
+ ^ 0xa0000 = CONFIG_SYS_NROF_UBL_HEADER * 0x20000
+ ^
+ 0x80000 = Block 4 * 0x20000
+
+If the cpu starts in NAND boot mode, it checks the UBL descriptor
+starting with block 1 (page 0). When a valid UBL signature is found,
+the corresponding block number (from 1 to 24) is written to the last 32
+bits of ARM internal memory (0x7ffc-0x8000). This feature is provided
+as a basic debug mechanism. If not found, it continues with block 2
+... last possible block is 24
+
+If a valid UBL descriptor is found, the UBL descriptor is read and
+processed. The descriptor gives the information required for loading
+and control transfer to the nand_spl code. The nand_spl code is then
+read and processed.
+
+Once the user-specified start-up conditions are set, the RBL copies the
+nand_spl into ARM internal RAM, starting at address 0x0000: 0020.
+ ^^^^
+
+The nand_spl code itself now does necessary intializations, and at least,
+copies the u-boot code from NAND into RAM, and jumps to it ...
+
+------------------------------------------------
+Author: Heiko Schocher <hs@denx.de>
diff --git a/include/image.h b/include/image.h
index c31e862..3c528a4 100644
--- a/include/image.h
+++ b/include/image.h
@@ -157,6 +157,7 @@
#define IH_TYPE_FLATDT 8 /* Binary Flat Device Tree Blob */
#define IH_TYPE_KWBIMAGE 9 /* Kirkwood Boot Image */
#define IH_TYPE_IMXIMAGE 10 /* Freescale IMXBoot Image */
+#define IH_TYPE_UBLIMAGE 11 /* Davinci UBL Image */
/*
* Compression Types
diff --git a/tools/Makefile b/tools/Makefile
index de96e34..9733db4 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -92,6 +92,7 @@ NOPED_OBJ_FILES-y += mkimage.o
OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o
NOPED_OBJ_FILES-y += os_support.o
OBJ_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1.o
+NOPED_OBJ_FILES-y += ublimage.o
# Don't build by default
#ifeq ($(ARCH),ppc)
@@ -192,6 +193,7 @@ $(obj)mkimage$(SFX): $(obj)crc32.o \
$(obj)mkimage.o \
$(obj)os_support.o \
$(obj)sha1.o \
+ $(obj)ublimage.o \
$(LIBFDT_OBJS)
$(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
$(HOSTSTRIP) $@
diff --git a/tools/mkimage.c b/tools/mkimage.c
index 60f7263..7215d0f 100644
--- a/tools/mkimage.c
+++ b/tools/mkimage.c
@@ -158,6 +158,8 @@ main (int argc, char **argv)
init_fit_image_type ();
/* Init Default image generation/list support */
init_default_image_type ();
+ /* Init Davinci UBL support */
+ init_ubl_image_type();
params.cmdname = *argv;
params.addr = params.ep = 0;
diff --git a/tools/mkimage.h b/tools/mkimage.h
index 9033a7d..d109d40 100644
--- a/tools/mkimage.h
+++ b/tools/mkimage.h
@@ -143,5 +143,6 @@ void init_kwb_image_type (void);
void init_imx_image_type (void);
void init_default_image_type (void);
void init_fit_image_type (void);
+void init_ubl_image_type(void);
#endif /* _MKIIMAGE_H_ */
diff --git a/tools/ublimage.c b/tools/ublimage.c
new file mode 100644
index 0000000..9987462
--- /dev/null
+++ b/tools/ublimage.c
@@ -0,0 +1,275 @@
+/*
+ * (C) Copyright 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Based on:
+ * (C) Copyright 2009
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * (C) Copyright 2008
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Required to obtain the getline prototype from stdio.h */
+#define _GNU_SOURCE
+
+#include "mkimage.h"
+#include <image.h>
+#include "ublimage.h"
+
+/*
+ * Supported commands for configuration file
+ */
+static table_entry_t ublimage_cmds[] = {
+ {CMD_BOOT_MODE, "MODE", "UBL special modes", },
+ {CMD_ENTRY, "ENTRY", "Entry point addr for bootloader", },
+ {CMD_PAGE, "PAGES",
+ "number of pages (size of bootloader)", },
+ {CMD_ST_BLOCK, "START_BLOCK",
+ "block number where bootloader is present", },
+ {CMD_ST_PAGE, "START_PAGE",
+ "page number where bootloader is present", },
+ {CMD_LD_ADDR, "LD_ADDR",
+ "load addr", },
+ {-1, "", "", },
+};
+
+/*
+ * Supported Boot options for configuration file
+ * this is needed to set the correct flash offset
+ */
+static table_entry_t ublimage_bootops[] = {
+ {UBL_MAGIC_SAFE, "safe", "Safe boot mode", },
+ {-1, "", "Invalid", },
+};
+
+static struct ubl_header ublimage_header;
+
+static uint32_t get_cfg_value(char *token, char *name, int linenr)
+{
+ char *endptr;
+ uint32_t value;
+
+ errno = 0;
+ value = strtoul(token, &endptr, 16);
+ if (errno || (token == endptr)) {
+ fprintf(stderr, "Error: %s[%d] - Invalid hex data(%s)\n",
+ name, linenr, token);
+ exit(EXIT_FAILURE);
+ }
+ return value;
+}
+
+static void print_hdr(struct ubl_header *ubl_hdr)
+{
+ printf("Image Type : Davinci UBL Boot Image\n");
+ printf("UBL magic : %08x\n", ubl_hdr->magic);
+ printf("Entry Point: %08x\n", ubl_hdr->entry);
+ printf("nr of pages: %08x\n", ubl_hdr->pages);
+ printf("start block: %08x\n", ubl_hdr->block);
+ printf("start page : %08x\n", ubl_hdr->page);
+}
+
+static void parse_cfg_cmd(struct ubl_header *ublhdr, int32_t cmd, char *token,
+ char *name, int lineno, int fld, int dcd_len)
+{
+ static int cmd_ver_first = ~0;
+
+ switch (cmd) {
+ case CMD_BOOT_MODE:
+ ublhdr->magic = get_table_entry_id(ublimage_bootops,
+ "ublimage special boot mode", token);
+ if (ublhdr->magic == -1) {
+ fprintf(stderr, "Error: %s[%d] -Invalid boot mode"
+ "(%s)\n", name, lineno, token);
+ exit(EXIT_FAILURE);
+ }
+ ublhdr->magic += UBL_MAGIC_BASE;
+ if (unlikely(cmd_ver_first != 1))
+ cmd_ver_first = 0;
+ break;
+ case CMD_ENTRY:
+ ublhdr->entry = get_cfg_value(token, name, lineno);
+ break;
+ case CMD_PAGE:
+ ublhdr->pages = get_cfg_value(token, name, lineno);
+ break;
+ case CMD_ST_BLOCK:
+ ublhdr->block = get_cfg_value(token, name, lineno);
+ break;
+ case CMD_ST_PAGE:
+ ublhdr->page = get_cfg_value(token, name, lineno);
+ break;
+ case CMD_LD_ADDR:
+ ublhdr->pll_m = get_cfg_value(token, name, lineno);
+ break;
+ }
+}
+
+static void parse_cfg_fld(struct ubl_header *ublhdr, int32_t *cmd,
+ char *token, char *name, int lineno, int fld, int *dcd_len)
+{
+
+ switch (fld) {
+ case CFG_COMMAND:
+ *cmd = get_table_entry_id(ublimage_cmds,
+ "ublimage commands", token);
+ if (*cmd < 0) {
+ fprintf(stderr, "Error: %s[%d] - Invalid command"
+ "(%s)\n", name, lineno, token);
+ exit(EXIT_FAILURE);
+ }
+ break;
+ case CFG_REG_VALUE:
+ parse_cfg_cmd(ublhdr, *cmd, token, name, lineno, fld, *dcd_len);
+ break;
+ default:
+ break;
+ }
+}
+static uint32_t parse_cfg_file(struct ubl_header *ublhdr, char *name)
+{
+ FILE *fd = NULL;
+ char *line = NULL;
+ char *token, *saveptr1, *saveptr2;
+ int lineno = 0;
+ int i;
+ char *ptr = (char *)ublhdr;
+ int fld;
+ size_t len;
+ int dcd_len = 0;
+ int32_t cmd;
+ int ublhdrlen = sizeof(struct ubl_header);
+
+ fd = fopen(name, "r");
+ if (fd == 0) {
+ fprintf(stderr, "Error: %s - Can't open DCD file\n", name);
+ exit(EXIT_FAILURE);
+ }
+
+ /* Fill header with 0xff */
+ for (i = 0; i < ublhdrlen; i++) {
+ *ptr = 0xff;
+ ptr++;
+ }
+
+ /*
+ * Very simple parsing, line starting with # are comments
+ * and are dropped
+ */
+ while ((getline(&line, &len, fd)) > 0) {
+ lineno++;
+
+ token = strtok_r(line, "\r\n", &saveptr1);
+ if (token == NULL)
+ continue;
+
+ /* Check inside the single line */
+ for (fld = CFG_COMMAND, cmd = CMD_INVALID,
+ line = token; ; line = NULL, fld++) {
+ token = strtok_r(line, " \t", &saveptr2);
+ if (token == NULL)
+ break;
+
+ /* Drop all text starting with '#' as comments */
+ if (token[0] == '#')
+ break;
+
+ parse_cfg_fld(ublhdr, &cmd, token, name,
+ lineno, fld, &dcd_len);
+ }
+ }
+ fclose(fd);
+
+ return dcd_len;
+}
+
+static int ublimage_check_image_types(uint8_t type)
+{
+ if (type == IH_TYPE_UBLIMAGE)
+ return EXIT_SUCCESS;
+ else
+ return EXIT_FAILURE;
+}
+
+static int ublimage_verify_header(unsigned char *ptr, int image_size,
+ struct mkimage_params *params)
+{
+ return 0;
+}
+
+static void ublimage_print_header(const void *ptr)
+{
+ struct ubl_header *ubl_hdr = (struct ubl_header *) ptr;
+
+ print_hdr(ubl_hdr);
+}
+
+static void ublimage_set_header(void *ptr, struct stat *sbuf, int ifd,
+ struct mkimage_params *params)
+{
+ struct ubl_header *ublhdr = (struct ubl_header *)ptr;
+
+ /* Parse configuration file */
+ parse_cfg_file(ublhdr, params->imagename);
+}
+
+int ublimage_check_params(struct mkimage_params *params)
+{
+ if (!params)
+ return CFG_INVALID;
+ if (!strlen(params->imagename)) {
+ fprintf(stderr, "Error: %s - Configuration file not"
+ "specified, it is needed for ublimage generation\n",
+ params->cmdname);
+ return CFG_INVALID;
+ }
+ /*
+ * Check parameters:
+ * XIP is not allowed and verify that incompatible
+ * parameters are not sent at the same time
+ * For example, if list is required a data image must not be provided
+ */
+ return (params->dflag && (params->fflag || params->lflag)) ||
+ (params->fflag && (params->dflag || params->lflag)) ||
+ (params->lflag && (params->dflag || params->fflag)) ||
+ (params->xflag) || !(strlen(params->imagename));
+}
+
+/*
+ * ublimage parameters
+ */
+static struct image_type_params ublimage_params = {
+ .name = "Davinci UBL boot support",
+ .header_size = sizeof(struct ubl_header),
+ .hdr = (void *)&ublimage_header,
+ .check_image_type = ublimage_check_image_types,
+ .verify_header = ublimage_verify_header,
+ .print_header = ublimage_print_header,
+ .set_header = ublimage_set_header,
+ .check_params = ublimage_check_params,
+};
+
+void init_ubl_image_type(void)
+{
+ mkimage_register(&ublimage_params);
+}
diff --git a/tools/ublimage.h b/tools/ublimage.h
new file mode 100644
index 0000000..c926689
--- /dev/null
+++ b/tools/ublimage.h
@@ -0,0 +1,103 @@
+/*
+ * (C) Copyright 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Vased on:
+ * (C) Copyright 2009
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _UBLIMAGE_H_
+#define _UBLIMAGE_H_
+
+#include <config.h>
+
+#if !defined(CONFIG_SYS_UBL_BLOCK)
+#define CONFIG_SYS_UBL_BLOCK 512
+#endif
+
+enum ublimage_cmd {
+ CMD_INVALID,
+ CMD_BOOT_MODE,
+ CMD_ENTRY,
+ CMD_PAGE,
+ CMD_ST_BLOCK,
+ CMD_ST_PAGE,
+ CMD_LD_ADDR
+};
+
+enum ublimage_fld_types {
+ CFG_INVALID = -1,
+ CFG_COMMAND,
+ CFG_REG_VALUE
+};
+
+/*
+ * from sprufg5a.pdf Table 110
+ * Used by RBL when doing NAND boot
+ */
+#define UBL_MAGIC_BASE (0xA1ACED00)
+/* Safe boot mode */
+#define UBL_MAGIC_SAFE (0x00)
+/* DMA boot mode */
+#define UBL_MAGIC_DMA (0x11)
+/* I Cache boot mode */
+#define UBL_MAGIC_IC (0x22)
+/* Fast EMIF boot mode */
+#define UBL_MAGIC_FAST (0x33)
+/* DMA + ICache boot mode */
+#define UBL_MAGIC_DMA_IC (0x44)
+/* DMA + ICache + Fast EMIF boot mode */
+#define UBL_MAGIC_DMA_IC_FAST (0x55)
+
+/* Define max UBL image size */
+#define UBL_IMAGE_SIZE (0x00003800u)
+
+/* from sprufg5a.pdf Table 109 */
+struct ubl_header {
+ uint32_t magic; /* Magic Number, see UBL_* defines */
+ uint32_t entry; /* entry point address for bootloader */
+ uint32_t pages; /* number of pages (size of bootloader) */
+ uint32_t block; /*
+ * blocknumber where user bootloader is
+ * present
+ */
+ uint32_t page; /*
+ * page number where user bootloader is
+ * present.
+ */
+ uint32_t pll_m; /*
+ * PLL setting -Multiplier (only valid if
+ * Magic Number indicates PLL enable).
+ */
+ uint32_t pll_n; /*
+ * PLL setting -Divider (only valid if
+ * Magic Number indicates PLL enable).
+ */
+ uint32_t emif; /*
+ * fast EMIF setting (only valid if
+ * Magic Number indicates fast EMIF boot).
+ */
+ /* to fit in one nand block */
+ unsigned char res[CONFIG_SYS_UBL_BLOCK - 8 * 4];
+};
+
+#endif /* _UBLIMAGE_H_ */