summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2005-11-29 18:18:21 +0100
committerStefan Roese <sr@denx.de>2005-11-29 18:18:21 +0100
commit6e7fb6eaa515e15c2b86451d7853c2611713e872 (patch)
tree512e4c08baa1047310056989a4a651fe4aa10d18
parent1178a412d2c71cf8be61738153f11c99ce9653a5 (diff)
downloadu-boot-imx-6e7fb6eaa515e15c2b86451d7853c2611713e872.zip
u-boot-imx-6e7fb6eaa515e15c2b86451d7853c2611713e872.tar.gz
u-boot-imx-6e7fb6eaa515e15c2b86451d7853c2611713e872.tar.bz2
Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
Patch by John Otken, 23 Nov 2005
-rw-r--r--CHANGELOG3
-rw-r--r--CREDITS4
-rw-r--r--MAINTAINERS4
-rwxr-xr-xMAKEALL13
-rw-r--r--Makefile3
-rw-r--r--board/amcc/luan/Makefile48
-rw-r--r--board/amcc/luan/config.mk44
-rw-r--r--board/amcc/luan/epld.h85
-rw-r--r--board/amcc/luan/flash.c111
-rw-r--r--board/amcc/luan/init.S132
-rw-r--r--board/amcc/luan/luan.c458
-rw-r--r--board/amcc/luan/u-boot.lds156
-rw-r--r--cpu/ppc4xx/405gp_pci.c54
-rw-r--r--cpu/ppc4xx/4xx_enet.c75
-rw-r--r--cpu/ppc4xx/cpu.c94
-rw-r--r--cpu/ppc4xx/miiphy.c2
-rw-r--r--cpu/ppc4xx/serial.c15
-rw-r--r--cpu/ppc4xx/speed.c2
-rw-r--r--cpu/ppc4xx/start.S20
-rw-r--r--cpu/ppc4xx/vecnum.h30
-rw-r--r--include/asm-ppc/processor.h2
-rw-r--r--include/configs/luan.h306
-rw-r--r--include/ppc440.h225
-rw-r--r--include/ppc4xx_enet.h6
24 files changed, 1650 insertions, 242 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 78f3da1..d038fb4 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,9 @@
Changes for U-Boot 1.1.4:
======================================================================
+* Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
+ Patch by John Otken, 23 Nov 2005
+
* Changed PPC44x startup message (cpu info, speed...) to common style:
On PPC44x platforms, the startup message generated in "cpu.c" only
comprised the ppc type and revision but not additional informations
diff --git a/CREDITS b/CREDITS
index c1686a5..f91fa3e 100644
--- a/CREDITS
+++ b/CREDITS
@@ -317,6 +317,10 @@ E: rof@sysgo.de
D: Initial support for SSV-DNP1110, SMC91111 driver
W: www.elinos.com
+N: John Otken
+E: jotken@softadvances.com
+D: Support for AMCC Luan 440SP board
+
N: Tolunay Orkun
E: torkun@nextio.com
D: Support for Cogent CSB272 & CSB472 boards
diff --git a/MAINTAINERS b/MAINTAINERS
index d026417..845f4e7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -240,6 +240,10 @@ Tolunay Orkun <torkun@nextio.com>
csb272 PPC405GP
csb472 PPC405GP
+John Otken <jotken@softadvances.com>
+
+ luan PPC440SP
+
Keith Outwater <Keith_Outwater@mvis.com>
GEN860T MPC860T
diff --git a/MAKEALL b/MAKEALL
index 7c5f1c1..64bec8a 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -68,12 +68,13 @@ LIST_4xx=" \
csb472 DASA_SIM DP405 DU405 \
ebony ERIC EXBITGEN G2000 \
HH405 HUB405 JSE KAREF \
- METROBOX MIP405 MIP405T ML2 \
- ml300 ocotea OCRTC ORSG \
- p3p440 PCI405 PIP405 PLU405 \
- PMC405 PPChameleonEVB sbc405 VOH405 \
- VOM405 W7OLMC W7OLMG walnut \
- WUH405 XPEDITE1K yellowstone yosemite \
+ luan METROBOX MIP405 MIP405T \
+ ML2 ml300 ocotea OCRTC \
+ ORSG p3p440 PCI405 PIP405 \
+ PLU405 PMC405 PPChameleonEVB sbc405 \
+ VOH405 VOM405 W7OLMC W7OLMG \
+ walnut WUH405 XPEDITE1K yellowstone \
+ yosemite \
"
#########################################################################
diff --git a/Makefile b/Makefile
index fdde4b9..5d65927 100644
--- a/Makefile
+++ b/Makefile
@@ -815,6 +815,9 @@ JSE_config: unconfig
KAREF_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx karef sandburst
+luan_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx luan amcc
+
METROBOX_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx metrobox sandburst
diff --git a/board/amcc/luan/Makefile b/board/amcc/luan/Makefile
new file mode 100644
index 0000000..5654f91
--- /dev/null
+++ b/board/amcc/luan/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o
+OBJS += flash.o
+SOBJS = init.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/amcc/luan/config.mk b/board/amcc/luan/config.mk
new file mode 100644
index 0000000..f52c206
--- /dev/null
+++ b/board/amcc/luan/config.mk
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# esd ADCIOP boards
+#
+
+#TEXT_BASE = 0x00001000
+
+ifeq ($(ramsym),1)
+TEXT_BASE = 0xFBD00000
+else
+TEXT_BASE = 0xFFFC0000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/amcc/luan/epld.h b/board/amcc/luan/epld.h
new file mode 100644
index 0000000..05362e0
--- /dev/null
+++ b/board/amcc/luan/epld.h
@@ -0,0 +1,85 @@
+#define EPLD0_FSEL_FB2 0x80
+#define EPLD0_BOOT_SMALL_FLASH 0x40 /* 0 boot from large flash, 1 from small flash */
+#define EPLD0_RAW_CARD_BIT0 0x20 /* raw card EC level */
+#define EPLD0_RAW_CARD_BIT1 0x10
+#define EPLD0_RAW_CARD_BIT2 0x08
+#define EPLD0_EXT_ARB_SEL_N 0x04 /* 0 select on-board ext PCI-X, 1 internal arbiter */
+#define EPLD0_FLASH_ONBRD_N 0x02 /* 0 small flash/SRAM active, 1 block access */
+#define EPLD0_FLASH_SRAM_SEL_N 0x01 /* 0 SRAM at mem top, 1 small flash at mem top */
+
+#define EPLD1_CLK_CNTL0 0x80 /* FSEL-FB1 of MPC9772 */
+#define EPLD1_PCIX0_CNTL1 0x40 /* S*0 of 9531 */
+#define EPLD1_PCIX0_CNTL2 0x20 /* S*1 of 9531 */
+#define EPLD1_CLK_CNTL3 0x10 /* FSEL-B1 of MPC9772 */
+#define EPLD1_CLK_CNTL4 0x08 /* FSEL-B0 of MPC9772 */
+#define EPLD1_MASTER_CLOCK6 0x04 /* clock source select 6 */
+#define EPLD1_MASTER_CLOCK7 0x02 /* clock source select 7 */
+#define EPLD1_MASTER_CLOCK8 0x01 /* clock source select 8 */
+
+#define EPLD2_ETH_MODE_10 0x80 /* Ethernet mode 10 (default = 1) */
+#define EPLD2_ETH_MODE_100 0x40 /* Ethernet mode 100 (default = 1) */
+#define EPLD2_ETH_MODE_1000 0x20 /* Ethernet mode 1000 (default = 1) */
+#define EPLD2_ETH_DUPLEX_MODE 0x10 /* Ethernet force full duplex mode */
+#define EPLD2_RESET_ETH_N 0x08 /* Ethernet reset (default = 1) */
+#define EPLD2_ETH_AUTO_NEGO 0x04 /* Ethernet auto negotiation */
+#define EPLD2_DEFAULT_UART_N 0x01 /* 0 select DSR DTR for UART1 */
+
+#define EPLD3_STATUS_LED4 0x08 /* status LED 8 (1 = LED on) */
+#define EPLD3_STATUS_LED3 0x04 /* status LED 4 (1 = LED on) */
+#define EPLD3_STATUS_LED2 0x02 /* status LED 2 (1 = LED on) */
+#define EPLD3_STATUS_LED1 0x01 /* status LED 1 (1 = LED on) */
+
+#define EPLD4_PCIX0_VTH1 0x80 /* PCI-X 0 VTH1 status */
+#define EPLD4_PCIX0_VTH2 0x40 /* PCI-X 0 VTH2 status */
+#define EPLD4_PCIX0_VTH3 0x20 /* PCI-X 0 VTH3 status */
+#define EPLD4_PCIX0_VTH4 0x10 /* PCI-X 0 VTH4 status */
+#define EPLD4_PCIX1_VTH1 0x08 /* PCI-X 1 VTH1 status */
+#define EPLD4_PCIX1_VTH2 0x04 /* PCI-X 1 VTH2 status */
+#define EPLD4_PCIX1_VTH3 0x02 /* PCI-X 1 VTH3 status */
+#define EPLD4_PCIX1_VTH4 0x01 /* PCI-X 1 VTH4 status */
+
+#define EPLD5_PCIX0_INT0 0x80 /* PCIX0 INT0 status, write 0 to reset */
+#define EPLD5_PCIX0_INT1 0x40 /* PCIX0 INT1 status, write 0 to reset */
+#define EPLD5_PCIX0_INT2 0x20 /* PCIX0 INT2 status, write 0 to reset */
+#define EPLD5_PCIX0_INT3 0x10 /* PCIX0 INT3 status, write 0 to reset */
+#define EPLD5_PCIX1_INT0 0x08 /* PCIX1 INT0 status, write 0 to reset */
+#define EPLD5_PCIX1_INT1 0x04 /* PCIX1 INT1 status, write 0 to reset */
+#define EPLD5_PCIX1_INT2 0x02 /* PCIX1 INT2 status, write 0 to reset */
+#define EPLD5_PCIX1_INT3 0x01 /* PCIX1 INT3 status, write 0 to reset */
+
+#define EPLD6_PCIX0_RESET_CTL 0x80 /* 0=enable slot reset, 1=disable slot reset */
+#define EPLD6_PCIX1_RESET_CTL 0x40 /* 0=enable slot reset, 1=disable slot reset */
+#define EPLD6_ETH_INT_MODE 0x20 /* 0=IRQ5 recv's external eth int */
+#define EPLD6_PCIX2_RESET_CTL 0x10 /* 0=enable slot reset, 1=disable slot reset */
+#define EPLD6_PCI1_CLKCNTL1 0x80 /* PCI1 clock control S*0 of 9531 */
+#define EPLD6_PCI1_CLKCNTL2 0x40 /* PCI1 clock control S*1 of 9531 */
+#define EPLD6_PCI2_CLKCNTL1 0x20 /* PCI2 clock control S*0 of 9531 */
+#define EPLD6_PCI2_CLKCNTL2 0x10 /* PCI2 clock control S*1 of 9531 */
+
+#define EPLD7_VTH1 0x80 /* PCI2 VTH1 status */
+#define EPLD7_VTH2 0x40 /* PCI2 VTH2 status */
+#define EPLD7_VTH3 0x20 /* PCI2 VTH3 status */
+#define EPLD7_VTH4 0x10 /* PCI2 VTH4 status */
+#define EPLD7_INTA_MODE 0x80 /* see S5 on SW2 for details */
+#define EPLD7_PCI_INT_MODE_N 0x40 /* see S1 on SW2 for details */
+#define EPLD7_WRITE_ENABLE_GPIO 0x20 /* see S2 on SW2 for details */
+#define EPLD7_WRITE_ENABLE_INT 0x10 /* see S3 on SW2 for details */
+
+
+typedef struct {
+ unsigned char status; /* misc status */
+ unsigned char clock; /* clock status, PCI-X clock control */
+ unsigned char ethuart; /* Ethernet, UART status */
+ unsigned char leds; /* LED register */
+ unsigned char vth01; /* PCI0, PCI1 VTH register */
+ unsigned char pciints; /* PCI0, PCI1 interrupts */
+ unsigned char pci2; /* PCI2 interrupts, clock control */
+ unsigned char vth2; /* PCI2 VTH register */
+ unsigned char filler1[4096-8];
+ unsigned char gpio00; /* GPIO bits 0-7 */
+ unsigned char gpio08; /* GPIO bits 8-15 */
+ unsigned char gpio16; /* GPIO bits 16-23 */
+ unsigned char gpio24; /* GPIO bits 24-31 */
+ unsigned char filler2[4096-4];
+ unsigned char version; /* EPLD version */
+} epld_t;
diff --git a/board/amcc/luan/flash.c b/board/amcc/luan/flash.c
new file mode 100644
index 0000000..d3c3c0d
--- /dev/null
+++ b/board/amcc/luan/flash.c
@@ -0,0 +1,111 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif /* DEBUG */
+
+static unsigned long flash_addr_table[1][CFG_MAX_FLASH_BANKS] = {
+ {0xff900000, 0xff980000, 0xffc00000}, /* 0:000: configuraton 3 */
+};
+
+/*
+ * include common flash code (for amcc boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+
+unsigned long flash_init(void)
+{
+ unsigned long total_b = 0;
+ unsigned long size_b[CFG_MAX_FLASH_BANKS];
+ unsigned short index = 0;
+ int i;
+
+ /* read FPGA base register FPGA_REG0 */
+
+ DEBUGF("\n");
+ DEBUGF("FLASH: Index: %d\n", index);
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+
+ /* check whether the address is 0 */
+ if (flash_addr_table[index][i] == 0) {
+ continue;
+ }
+
+ /* call flash_get_size() to initialize sector address */
+ size_b[i] = flash_get_size((vu_long *)
+ flash_addr_table[index][i],
+ &flash_info[i]);
+ flash_info[i].size = size_b[i];
+ if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+ printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+ i, size_b[i], size_b[i] << 20);
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+ }
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[2]);
+#ifdef CFG_ENV_IS_IN_FLASH
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[2]);
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[2]);
+#endif
+
+ total_b += flash_info[i].size;
+ }
+
+ return total_b;
+}
diff --git a/board/amcc/luan/init.S b/board/amcc/luan/init.S
new file mode 100644
index 0000000..7830ebd
--- /dev/null
+++ b/board/amcc/luan/init.S
@@ -0,0 +1,132 @@
+/*
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID 0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K 0x00000000
+#define SZ_4K 0x00000010
+#define SZ_16K 0x00000020
+#define SZ_64K 0x00000030
+#define SZ_256K 0x00000040
+#define SZ_1M 0x00000050
+#define SZ_16M 0x00000070
+#define SZ_256M 0x00000090
+
+/* Storage attributes */
+#define SA_W 0x00000800 /* Write-through */
+#define SA_I 0x00000400 /* Caching inhibited */
+#define SA_M 0x00000200 /* Memory coherence */
+#define SA_G 0x00000100 /* Guarded */
+#define SA_E 0x00000080 /* Endian */
+
+/* Access control */
+#define AC_X 0x00000024 /* Execute */
+#define AC_W 0x00000012 /* Write */
+#define AC_R 0x00000009 /* Read */
+
+/* Some handy macros */
+
+#define EPN(e) ((e) & 0xfffffc00)
+#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a) ( (a)&0x00000fbf )
+
+#define tlbtab_start\
+ mflr r1 ;\
+ bl 0f ;
+
+#define tlbtab_end\
+ .long 0, 0, 0 ; \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+ .section .bootpg,"ax"
+ .globl tlbtab
+
+tlbtab:
+ tlbtab_start
+
+#if (CFG_LARGE_FLASH == 0xffc00000) /* if booting from large flash */
+ /* large flash */
+ tlbentry( 0xffc00000, SZ_1M, 0xffc00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
+ tlbentry( 0xffd00000, SZ_1M, 0xffd00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
+ tlbentry( 0xffe00000, SZ_1M, 0xffe00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
+ tlbentry( 0xfff00000, SZ_1M, 0xfff00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
+
+ tlbentry( 0xff800000, SZ_1M, 0xff800000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
+ tlbentry( 0xff900000, SZ_1M, 0xff900000, 1, AC_R|AC_W|AC_X|SA_G|SA_I|SA_W )
+#else /* else booting from small flash */
+ tlbentry( 0xffe00000, SZ_1M, 0xffe00000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
+ tlbentry( 0xfff00000, SZ_1M, 0xfff00000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
+
+ tlbentry( 0xff800000, SZ_1M, 0xff800000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
+ tlbentry( 0xff900000, SZ_1M, 0xff900000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
+ tlbentry( 0xffa00000, SZ_1M, 0xffa00000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
+ tlbentry( 0xffb00000, SZ_1M, 0xffb00000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
+#endif
+
+ tlbentry( CFG_EPLD_BASE, SZ_256K, 0xff000000, 1, AC_R|AC_W|SA_G|SA_I )
+
+#if (CFG_SRAM_BASE != 0) /* if SRAM up high and SDRAM at zero */
+ tlbentry( 0x00000000, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+#elif (CFG_SMALL_FLASH == 0xff900000) /* else SRAM at 0 */
+ tlbentry( 0x00000000, SZ_1M, 0xff800000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
+#elif (CFG_SMALL_FLASH == 0xfff00000)
+ tlbentry( 0x00000000, SZ_1M, 0xffe00000, 1, AC_R|AC_W|AC_X|SA_G/*|SA_I*/ )
+#else
+ #error DONT KNOW SRAM LOCATION
+#endif
+
+ /* internal ram (l2 cache) */
+ tlbentry( CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_I )
+
+ /* peripherals at f0000000 */
+ tlbentry( CFG_PERIPHERAL_BASE, SZ_4K, CFG_PERIPHERAL_BASE, 1, AC_R|AC_W|SA_G|SA_I )
+
+ /* PCI */
+#if (CONFIG_COMMANDS & CFG_CMD_PCI)
+ tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 9, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 9, AC_R|AC_W|SA_G|SA_I )
+#endif
+ tlbtab_end
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
new file mode 100644
index 0000000..c6b79a9
--- /dev/null
+++ b/board/amcc/luan/luan.c
@@ -0,0 +1,458 @@
+/*
+ * (C) Copyright 2005
+ * John Otken, jotken@softadvances.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+#include "epld.h"
+
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+
+/*************************************************************************
+ * int board_early_init_f()
+ *
+ ************************************************************************/
+int board_early_init_f(void)
+{
+ volatile epld_t *x = (epld_t *) CFG_EPLD_BASE;
+
+ mtebc( pb0ap, 0x03800000 ); /* set chip selects */
+ mtebc( pb0cr, 0xffc58000 ); /* ebc0_b0cr, 4MB at 0xffc00000 CS0 */
+ mtebc( pb1ap, 0x03800000 );
+ mtebc( pb1cr, 0xff018000 ); /* ebc0_b1cr, 1MB at 0xff000000 CS1 */
+ mtebc( pb2ap, 0x03800000 );
+ mtebc( pb2cr, 0xff838000 ); /* ebc0_b2cr, 2MB at 0xff800000 CS2 */
+
+ mtdcr( uic1sr, 0xffffffff ); /* Clear all interrupts */
+ mtdcr( uic1er, 0x00000000 ); /* disable all interrupts */
+ mtdcr( uic1cr, 0x00000000 ); /* Set Critical / Non Critical interrupts */
+ mtdcr( uic1pr, 0x7fff83ff ); /* Set Interrupt Polarities */
+ mtdcr( uic1tr, 0x001f8000 ); /* Set Interrupt Trigger Levels */
+ mtdcr( uic1vr, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr( uic1sr, 0x00000000 ); /* clear all interrupts */
+ mtdcr( uic1sr, 0xffffffff );
+
+ mtdcr( uic0sr, 0xffffffff ); /* Clear all interrupts */
+ mtdcr( uic0er, 0x00000000 ); /* disable all interrupts excepted cascade */
+ mtdcr( uic0cr, 0x00000001 ); /* Set Critical / Non Critical interrupts */
+ mtdcr( uic0pr, 0xffffffff ); /* Set Interrupt Polarities */
+ mtdcr( uic0tr, 0x01000004 ); /* Set Interrupt Trigger Levels */
+ mtdcr( uic0vr, 0x00000001 ); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr( uic0sr, 0x00000000 ); /* clear all interrupts */
+ mtdcr( uic0sr, 0xffffffff );
+
+ x->ethuart &= ~EPLD2_RESET_ETH_N; /* put Ethernet+PHY in reset */
+
+ return 0;
+}
+
+
+/*************************************************************************
+ * int misc_init_r()
+ *
+ ************************************************************************/
+int misc_init_r(void)
+{
+ volatile epld_t *x = (epld_t *) CFG_EPLD_BASE;
+ x->ethuart |= EPLD2_RESET_ETH_N; /* take Ethernet+PHY out of reset */
+
+ return 0;
+}
+
+
+/*************************************************************************
+ * int checkboard()
+ *
+ ************************************************************************/
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+
+ printf("Board: Luan - AMCC PPC440SP Evaluation Board");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ return 0;
+}
+
+
+/*************************************************************************
+ * long int fixed_sdram()
+ *
+ ************************************************************************/
+static long int fixed_sdram(void)
+{ /* DDR2 init from BDI2000 script */
+ mtdcr( 0x10, 0x00000021 ); /* MCIF0_MCOPT2 - zero DCEN bit */
+ mtdcr( 0x11, 0x84000000 );
+ mtdcr( 0x10, 0x00000020 ); /* MCIF0_MCOPT1 - no ECC, 64 bits, 4 banks, DDR2 */
+ mtdcr( 0x11, 0x2D122000 );
+ mtdcr( 0x10, 0x00000026 ); /* MCIF0_CODT - die termination on */
+ mtdcr( 0x11, 0x00800026 );
+ mtdcr( 0x10, 0x00000081 ); /* MCIF0_WRDTR - Write DQS Adv 90 + Fractional DQS Delay */
+ mtdcr( 0x11, 0x82000800 );
+ mtdcr( 0x10, 0x00000080 ); /* MCIF0_CLKTR - advance addr clock by 180 deg */
+ mtdcr( 0x11, 0x80000000 );
+ mtdcr( 0x10, 0x00000040 ); /* MCIF0_MB0CF - turn on CS0, N x 10 coll */
+ mtdcr( 0x11, 0x00000201 );
+ mtdcr( 0x10, 0x00000044 ); /* MCIF0_MB1CF - turn on CS0, N x 10 coll */
+ mtdcr( 0x11, 0x00000201 );
+ mtdcr( 0x10, 0x00000030 ); /* MCIF0_RTR - refresh every 7.8125uS */
+ mtdcr( 0x11, 0x08200000 );
+ mtdcr( 0x10, 0x00000085 ); /* MCIF0_SDTR1 - timing register 1 */
+ mtdcr( 0x11, 0x80201000 );
+ mtdcr( 0x10, 0x00000086 ); /* MCIF0_SDTR2 - timing register 2 */
+ mtdcr( 0x11, 0x42103242 );
+ mtdcr( 0x10, 0x00000087 ); /* MCIF0_SDTR3 - timing register 3 */
+ mtdcr( 0x11, 0x0C100D14 );
+ mtdcr( 0x10, 0x00000088 ); /* MCIF0_MMODE - CAS is 4 cycles */
+ mtdcr( 0x11, 0x00000642 );
+ mtdcr( 0x10, 0x00000089 ); /* MCIF0_MEMODE - diff DQS disabled */
+ mtdcr( 0x11, 0x00000400 ); /* ODT term disabled */
+
+ mtdcr( 0x10, 0x00000050 ); /* MCIF0_INITPLR0 - NOP */
+ mtdcr( 0x11, 0x81b80000 );
+ mtdcr( 0x10, 0x00000051 ); /* MCIF0_INITPLR1 - PRE */
+ mtdcr( 0x11, 0x82100400 );
+ mtdcr( 0x10, 0x00000052 ); /* MCIF0_INITPLR2 - EMR2 */
+ mtdcr( 0x11, 0x80820000 );
+ mtdcr( 0x10, 0x00000053 ); /* MCIF0_INITPLR3 - EMR3 */
+ mtdcr( 0x11, 0x80830000 );
+ mtdcr( 0x10, 0x00000054 ); /* MCIF0_INITPLR4 - EMR DLL ENABLE */
+ mtdcr( 0x11, 0x80810000 );
+ mtdcr( 0x10, 0x00000055 ); /* MCIF0_INITPLR5 - MR DLL RESET */
+ mtdcr( 0x11, 0x80800542 );
+ mtdcr( 0x10, 0x00000056 ); /* MCIF0_INITPLR6 - PRE */
+ mtdcr( 0x11, 0x82100400 );
+ mtdcr( 0x10, 0x00000057 ); /* MCIF0_INITPLR7 - refresh */
+ mtdcr( 0x11, 0x99080000 );
+ mtdcr( 0x10, 0x00000058 ); /* MCIF0_INITPLR8 */
+ mtdcr( 0x11, 0x99080000 );
+ mtdcr( 0x10, 0x00000059 ); /* MCIF0_INITPLR9 */
+ mtdcr( 0x11, 0x99080000 );
+ mtdcr( 0x10, 0x0000005A ); /* MCIF0_INITPLR10 */
+ mtdcr( 0x11, 0x99080000 );
+ mtdcr( 0x10, 0x0000005B ); /* MCIF0_INITPLR11 - MR */
+ mtdcr( 0x11, 0x80800442 );
+ mtdcr( 0x10, 0x0000005C ); /* MCIF0_INITPLR12 - EMR OCD Default */
+ mtdcr( 0x11, 0x80810380 );
+ mtdcr( 0x10, 0x0000005D ); /* MCIF0_INITPLR13 - EMR OCD exit */
+ mtdcr( 0x11, 0x80810000 );
+ udelay( 10*1000 );
+
+ mtdcr( 0x10, 0x00000021 ); /* MCIF0_MCOPT2 - execute preloaded init */
+ mtdcr( 0x11, 0x28000000 ); /* set DC_EN */
+ udelay( 100*1000 );
+
+ mtdcr( 0x40, 0x0000F800 ); /* MQ0_B0BAS: base addr 00000000 / 256MB */
+ mtdcr( 0x41, 0x1000F800 ); /* MQ0_B1BAS: base addr 10000000 / 256MB */
+
+ mtdcr( 0x10, 0x00000078 ); /* MCIF0_RDCC - auto set read stage */
+ mtdcr( 0x11, 0x00000000 );
+ mtdcr( 0x10, 0x00000070 ); /* MCIF0_RQDC - read DQS delay control */
+ mtdcr( 0x11, 0x8000003A ); /* enabled, frac DQS delay */
+ mtdcr( 0x10, 0x00000074 ); /* MCIF0_RFDC - two clock feedback delay */
+ mtdcr( 0x11, 0x00000200 );
+
+ return 512 << 20;
+}
+
+
+/*************************************************************************
+ * long int initdram
+ *
+ ************************************************************************/
+long int initdram( int board_type )
+{
+ long dram_size = 0;
+
+#if defined(CONFIG_SPD_EEPROM)
+ dram_size = spd_sdram (0);
+#else
+ dram_size = fixed_sdram ();
+#endif
+
+ return dram_size;
+}
+
+
+/*************************************************************************
+ * int testdram()
+ *
+ ************************************************************************/
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+ unsigned long *mem = (unsigned long *) 0;
+ const unsigned long kend = (1024 / sizeof(unsigned long));
+ unsigned long k, n;
+
+ mtmsr(0);
+
+ for (k = 0; k < CFG_KBYTES_SDRAM;
+ ++k, mem += (1024 / sizeof(unsigned long))) {
+ if ((k & 1023) == 0) {
+ printf("%3d MB\r", k / 1024);
+ }
+
+ memset(mem, 0xaaaaaaaa, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0xaaaaaaaa) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+
+ memset(mem, 0x55555555, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0x55555555) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+ }
+ printf("SDRAM test passes\n");
+
+ return 0;
+}
+#endif
+
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init( struct pci_controller *hose )
+{
+ unsigned long strap;
+
+ /*--------------------------------------------------------------------------+
+ * The luan board is always configured as the host & requires the
+ * PCI arbiter to be enabled.
+ *--------------------------------------------------------------------------*/
+ mfsdr(sdr_sdstp1, strap);
+ if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) {
+ printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
+
+ return 0;
+ }
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /*--------------------------------------------------------------------------+
+ * Disable everything
+ *--------------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0SA, 0 ); /* disable */
+ out32r( PCIX0_PIM1SA, 0 ); /* disable */
+ out32r( PCIX0_PIM2SA, 0 ); /* disable */
+ out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+
+ /*--------------------------------------------------------------------------+
+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
+ * options to not support sizes such as 128/256 MB.
+ *--------------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAH, 0 );
+ out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+
+ out32r( PCIX0_BAR0, 0 );
+
+ /*--------------------------------------------------------------------------+
+ * Program the board's subsystem id/vendor id
+ *--------------------------------------------------------------------------*/
+ out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+
+ out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) */
+
+
+/*************************************************************************
+ * hw_watchdog_reset
+ *
+ * This routine is called to reset (keep alive) the watchdog timer
+ *
+ ************************************************************************/
+#if defined(CONFIG_HW_WATCHDOG)
+void hw_watchdog_reset(void)
+{
+}
+#endif
+
+
+/*************************************************************************
+ * int on_off()
+ *
+ ************************************************************************/
+static int on_off( const char *s )
+{
+ if (strcmp(s, "on") == 0) {
+ return 1;
+ } else if (strcmp(s, "off") == 0) {
+ return 0;
+ }
+ return -1;
+}
+
+
+/*************************************************************************
+ * void l2cache_disable()
+ *
+ ************************************************************************/
+static void l2cache_disable(void)
+{
+ mtdcr( l2_cache_cfg, 0 );
+}
+
+
+/*************************************************************************
+ * void l2cache_enable()
+ *
+ ************************************************************************/
+static void l2cache_enable(void) /* see p258 7.4.1 Enabling L2 Cache */
+{
+ mtdcr( l2_cache_cfg, 0x80000000 ); /* enable L2_MODE L2_CFG[L2M] */
+
+ mtdcr( l2_cache_addr, 0 ); /* set L2_ADDR with all zeros */
+
+ mtdcr( l2_cache_cmd, 0x80000000 ); /* issue HCLEAR command via L2_CMD */
+
+ while (!(mfdcr( l2_cache_stat ) & 0x80000000 )) ;; /* poll L2_SR for completion */
+
+ mtdcr( l2_cache_cmd, 0x10000000 ); /* clear cache errors L2_CMD[CCP] */
+
+ mtdcr( l2_cache_cmd, 0x08000000 ); /* clear tag errors L2_CMD[CTE] */
+
+ mtdcr( l2_cache_snp0, 0 ); /* snoop registers */
+ mtdcr( l2_cache_snp1, 0 );
+
+ __asm__ volatile ("sync"); /* msync */
+
+ mtdcr( l2_cache_cfg, 0xe0000000 ); /* inst and data use L2 */
+
+ __asm__ volatile ("sync");
+}
+
+
+/*************************************************************************
+ * int l2cache_status()
+ *
+ ************************************************************************/
+static int l2cache_status(void)
+{
+ return (mfdcr( l2_cache_cfg ) & 0x60000000) != 0;
+}
+
+
+/*************************************************************************
+ * int do_l2cache()
+ *
+ ************************************************************************/
+int do_l2cache( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
+{
+ switch (argc) {
+ case 2: /* on / off */
+ switch (on_off(argv[1])) {
+ case 0: l2cache_disable();
+ break;
+ case 1: l2cache_enable();
+ break;
+ }
+ /* FALL TROUGH */
+ case 1: /* get status */
+ printf ("L2 Cache is %s\n",
+ l2cache_status() ? "ON" : "OFF");
+ return 0;
+ default:
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ return 0;
+}
+
+
+U_BOOT_CMD(
+ l2cache, 2, 1, do_l2cache,
+ "l2cache - enable or disable L2 cache\n",
+ "[on, off]\n"
+ " - enable or disable L2 cache\n"
+ );
diff --git a/board/amcc/luan/u-boot.lds b/board/amcc/luan/u-boot.lds
new file mode 100644
index 0000000..24a0fde
--- /dev/null
+++ b/board/amcc/luan/u-boot.lds
@@ -0,0 +1,156 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/ppc4xx/start.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ board/amcc/luan/init.o (.text)
+ cpu/ppc4xx/kgdb.o (.text)
+ cpu/ppc4xx/traps.o (.text)
+ cpu/ppc4xx/interrupts.o (.text)
+ cpu/ppc4xx/serial.o (.text)
+ cpu/ppc4xx/cpu_init.o (.text)
+ cpu/ppc4xx/speed.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+
+/* . = env_offset;*/
+/* common/environment.o(.text)*/
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index 6a4128c..64431ab 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -437,11 +437,11 @@ void pci_440_init (struct pci_controller *hose)
* The PCI initialization sequence enable bit must be set ... if not abort
* pci setup since updating the bit requires chip reset.
*--------------------------------------------------------------------------*/
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
unsigned long strap;
mfsdr(sdr_sdstp1,strap);
- if ( (strap & 0x00010000) == 0 ){
+ if ((strap & SDR0_SDSTP1_PISE_MASK) == 0) {
printf("PCI: SDR0_STRP1[PISE] not set.\n");
printf("PCI: Configuration aborted.\n");
return;
@@ -450,7 +450,7 @@ void pci_440_init (struct pci_controller *hose)
unsigned long strap;
strap = mfdcr(cpc0_strp1);
- if( (strap & 0x00040000) == 0 ){
+ if ((strap & CPC0_STRP1_PISE_MASK) == 0) {
printf("PCI: CPC0_STRP1[PISE] not set.\n");
printf("PCI: Configuration aborted.\n");
return;
@@ -466,26 +466,26 @@ void pci_440_init (struct pci_controller *hose)
pci_set_region(hose->regions + reg_num++,
0x00000000,
- PCIX0_IOBASE,
- 0x10000,
- PCI_REGION_IO);
+ PCIX0_IOBASE,
+ 0x10000,
+ PCI_REGION_IO);
pci_set_region(hose->regions + reg_num++,
CFG_PCI_TARGBASE,
- CFG_PCI_MEMBASE,
- 0x10000000,
- PCI_REGION_MEM );
+ CFG_PCI_MEMBASE,
+ 0x10000000,
+ PCI_REGION_MEM );
hose->region_count = reg_num;
pci_setup_indirect(hose, PCIX0_CFGADR, PCIX0_CFGDATA);
#if defined(CFG_PCI_PRE_INIT)
- /* Let board change/modify hose & do initial checks */
- if( pci_pre_init (hose) == 0 ){
- printf("PCI: Board-specific initialization failed.\n");
- printf("PCI: Configuration aborted.\n");
- return;
- }
+ /* Let board change/modify hose & do initial checks */
+ if (pci_pre_init (hose) == 0) {
+ printf("PCI: Board-specific initialization failed.\n");
+ printf("PCI: Configuration aborted.\n");
+ return;
+ }
#endif
pci_register_hose( hose );
@@ -496,9 +496,9 @@ void pci_440_init (struct pci_controller *hose)
#if defined(CFG_PCI_TARGET_INIT)
pci_target_init(hose); /* Let board setup pci target */
#else
- out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
- out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_ID );
- out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */
+ out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_ID );
+ out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */
#endif
#if defined(CONFIG_440GX)
@@ -524,24 +524,24 @@ void pci_440_init (struct pci_controller *hose)
out32r( PCIX0_POM0PCIAL, CFG_PCI_MEMBASE );
out32r( PCIX0_POM0PCIAH, 0x00000000 );
out32r( PCIX0_POM0SA, 0xf0000001 ); /* 256MB, enabled */
- out32r( PCIX0_STS, in32r( PCIX0_STS ) & ~0x0000fff8 );
+ out32r( PCIX0_STS, in32r( PCIX0_STS ) & ~0x0000fff8 );
#endif
/*--------------------------------------------------------------------------+
* PCI host configuration -- we don't make any assumptions here ... the
- * _board_must_indicate_ what to do -- there's just too many runtime
- * scenarios in environments like cPCI, PPMC, etc. to make a determination
- * based on hard-coded values or state of arbiter enable.
+ * _board_must_indicate_ what to do -- there's just too many runtime
+ * scenarios in environments like cPCI, PPMC, etc. to make a determination
+ * based on hard-coded values or state of arbiter enable.
*--------------------------------------------------------------------------*/
- if( is_pci_host(hose) ){
+ if (is_pci_host(hose)) {
#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
#endif
#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
- out16r( PCIX0_CMD, in16r( PCIX0_CMD ) | PCI_COMMAND_MASTER);
+ out16r( PCIX0_CMD, in16r( PCIX0_CMD ) | PCI_COMMAND_MASTER);
#endif
- hose->last_busno = pci_hose_scan(hose);
- }
+ hose->last_busno = pci_hose_scan(hose);
+ }
}
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 8423cc3..86dc2d0 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -314,9 +314,11 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
unsigned mode_reg;
unsigned short devnum;
unsigned short reg_short;
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
sys_info_t sysinfo;
- int ethgroup;
+#if defined(CONFIG_440GX)
+ int ethgroup = -1;
+#endif
#endif
EMAC_4XX_HW_PST hw_p = dev->priv;
@@ -328,7 +330,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
return -1;
}
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
/* Need to get the OPB frequency so we can access the PHY */
get_sys_info (&sysinfo);
#endif
@@ -371,7 +373,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
hw_p->tx_i_index = 0; /* Transmit Interrupt Queue Index */
hw_p->tx_u_index = 0; /* Transmit User Queue Index */
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) && !defined(CONFIG_440SP)
/* set RMII mode */
/* NOTE: 440GX spec states that mode is mutually exclusive */
/* NOTE: Therefore, disable all other EMACS, since we handle */
@@ -399,7 +401,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
#endif
out32 (ZMII_SSR, ZMII_SSR_SP << ZMII_SSR_V(devnum));
-#endif /* defined(CONFIG_440) */
+#endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */
__asm__ volatile ("eieio");
@@ -414,7 +416,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
failsafe--;
}
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
/* Whack the M1 register */
mode_reg = 0x0;
mode_reg &= ~0x00000038;
@@ -429,7 +431,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
mode_reg |= EMAC_M1_OBCI_GT100;
out32 (EMAC_M1 + hw_p->hw_addr, mode_reg);
-#endif /* defined(CONFIG_440GX) */
+#endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
/* wait for PHY to complete auto negotiation */
reg_short = 0;
@@ -466,7 +468,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
if (hw_p->first_init == 0) {
miiphy_reset (dev->name, reg);
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
#if defined(CONFIG_CIS8201_PHY)
/*
* Cicada 8201 PHY needs to have an extended register whacked
@@ -542,7 +544,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
(int) speed, (duplex == HALF) ? "HALF" : "FULL");
}
-#if defined(CONFIG_440)
+#if defined(CONFIG_440) && !defined(CONFIG_440SP)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
mfsdr(sdr_mfr, reg);
if (speed == 100) {
@@ -570,10 +572,10 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
out32 (RGMII_SSR, reg);
}
-#endif /* defined(CONFIG_440) */
+#endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */
/* set the Mal configuration reg */
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000);
#else
@@ -756,9 +758,16 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
mode_reg |= EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K;
/* set speed */
- if (speed == _1000BASET)
+ if (speed == _1000BASET) {
+#if defined(CONFIG_440SP)
+#define SDR0_PFC1_EM_1000 0x00200000
+ unsigned long pfc1;
+ mfsdr (sdr_pfc1, pfc1);
+ pfc1 |= SDR0_PFC1_EM_1000;
+ mtsdr (sdr_pfc1, pfc1);
+#endif
mode_reg = mode_reg | EMAC_M1_MF_1000MBPS | EMAC_M1_IST;
- else if (speed == _100BASET)
+ } else if (speed == _100BASET)
mode_reg = mode_reg | EMAC_M1_MF_100MBPS | EMAC_M1_IST;
else
mode_reg = mode_reg & ~0x00C00000; /* 10 MBPS */
@@ -883,8 +892,21 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr,
}
}
+
#if defined (CONFIG_440)
+#if defined(CONFIG_440SP)
+/*
+ * Hack: On 440SP all enet irq sources are located on UIC1
+ * Needs some cleanup. --sr
+ */
+#define UIC0MSR uic1msr
+#define UIC0SR uic1sr
+#else
+#define UIC0MSR uic0msr
+#define UIC0SR uic0sr
+#endif
+
int enetInt (struct eth_device *dev)
{
int serviced;
@@ -911,20 +933,17 @@ int enetInt (struct eth_device *dev)
hw_p = dev->priv;
-
/* enter loop that stays in interrupt code until nothing to service */
do {
serviced = 0;
- my_uic0msr = mfdcr (uic0msr);
+ my_uic0msr = mfdcr (UIC0MSR);
my_uic1msr = mfdcr (uic1msr);
#if defined(CONFIG_440GX)
my_uic2msr = mfdcr (uic2msr);
#endif
if (!(my_uic0msr & (UIC_MRE | UIC_MTE))
- && !(my_uic1msr &
- (UIC_ETH0 | UIC_ETH1 | UIC_MS | UIC_MTDE |
- UIC_MRDE))) {
+ && !(my_uic1msr & (UIC_ETH0 | UIC_ETH1 | UIC_MS | UIC_MTDE | UIC_MRDE))) {
/* not for us */
return (rc);
}
@@ -962,12 +981,13 @@ int enetInt (struct eth_device *dev)
}
if ((hw_p->emac_ier & emac_isr)
|| (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
- mtdcr (uic0sr, UIC_MRE | UIC_MTE); /* Clear */
+ mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
mtdcr (uic1sr, UIC_ETH0 | UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
return (rc); /* we had errors so get out */
}
}
+#if !defined(CONFIG_440SP)
if (hw_p->devnum == 1) {
if (UIC_ETH1 & my_uic1msr) { /* look for EMAC errors */
emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
@@ -979,7 +999,7 @@ int enetInt (struct eth_device *dev)
}
if ((hw_p->emac_ier & emac_isr)
|| (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
- mtdcr (uic0sr, UIC_MRE | UIC_MTE); /* Clear */
+ mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
mtdcr (uic1sr, UIC_ETH1 | UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
return (rc); /* we had errors so get out */
}
@@ -996,7 +1016,7 @@ int enetInt (struct eth_device *dev)
}
if ((hw_p->emac_ier & emac_isr)
|| (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
- mtdcr (uic0sr, UIC_MRE | UIC_MTE); /* Clear */
+ mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
mtdcr (uic2sr, UIC_ETH2);
return (rc); /* we had errors so get out */
@@ -1014,18 +1034,20 @@ int enetInt (struct eth_device *dev)
}
if ((hw_p->emac_ier & emac_isr)
|| (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
- mtdcr (uic0sr, UIC_MRE | UIC_MTE); /* Clear */
+ mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
mtdcr (uic2sr, UIC_ETH3);
return (rc); /* we had errors so get out */
}
}
#endif /* CONFIG_440GX */
+#endif /* !CONFIG_440SP */
+
/* handle MAX TX EOB interrupt from a tx */
if (my_uic0msr & UIC_MTE) {
mal_rx_eob = mfdcr (maltxeobisr);
mtdcr (maltxeobisr, mal_rx_eob);
- mtdcr (uic0sr, UIC_MTE);
+ mtdcr (UIC0SR, UIC_MTE);
}
/* handle MAL RX EOB interupt from a receive */
/* check for EOB on valid channels */
@@ -1040,7 +1062,8 @@ int enetInt (struct eth_device *dev)
rc = 0;
}
}
- mtdcr (uic0sr, UIC_MRE); /* Clear */
+
+ mtdcr (UIC0SR, UIC_MRE); /* Clear */
mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
switch (hw_p->devnum) {
case 0:
@@ -1489,7 +1512,7 @@ int ppc_4xx_eth_initialize (bd_t * bis)
#endif
#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
miiphy_register (dev->name,
- emac4xx_miiphy_read, emac4xx_miiphy_write);
+ emac4xx_miiphy_read, emac4xx_miiphy_write);
#endif
} /* end for each supported device */
@@ -1531,7 +1554,7 @@ int emac4xx_miiphy_initialize (bd_t * bis)
{
#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
miiphy_register ("ppc_4xx_eth0",
- emac4xx_miiphy_read, emac4xx_miiphy_write);
+ emac4xx_miiphy_read, emac4xx_miiphy_write);
#endif
return 0;
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 6c61953..0b5883c 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -38,40 +38,73 @@
#include <ppc4xx.h>
-#if defined(CONFIG_405GP)
-#define PCI_ARBITER_ENABLED (mfdcr(strap) & PSR_PCI_ARBIT_EN)
-#define PCI_ASYNC_ENABLED (mfdcr(strap) & PSR_PCI_ASYNC_EN)
+#if defined(CONFIG_440)
+#define FREQ_EBC (sys_info.freqEPB)
+#else
+#define FREQ_EBC (sys_info.freqPLB / sys_info.pllExtBusDiv)
#endif
-#if defined(CONFIG_405EP)
-#define PCI_ARBITER_ENABLED (mfdcr(cpc0_pci) & CPC0_PCI_ARBIT_EN)
-#define I2C_BOOTROM_ENABLED (mfdcr(cpc0_boot) & CPC0_BOOT_SEP)
+#if defined(CONFIG_405GP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+
+#define PCI_ASYNC
+
+int pci_async_enabled(void)
+{
+#if defined(CONFIG_405GP)
+ return (mfdcr(strap) & PSR_PCI_ASYNC_EN);
#endif
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
-#define SDR0_SDSTP1_PAE (0x80000000 >> 21)
-#define SDR0_SDSTP1_PAME (0x80000000 >> 27)
+ unsigned long val;
-#define PCI_ARBITER_ENABLED (mfdcr(cpc0_strp1) & SDR0_SDSTP1_PAE)
-#define PCI_ASYNC_ENABLED (mfdcr(cpc0_strp1) & SDR0_SDSTP1_PAME)
+ mfsdr(cpc0_strp1, val);
+ return (val & SDR0_SDSTP1_PAME_MASK);
+#endif
+}
+#endif
+
+#if defined(CONFIG_PCI)
+int pci_arbiter_enabled(void)
+{
+#if defined(CONFIG_405GP)
+ return (mfdcr(strap) & PSR_PCI_ARBIT_EN);
+#endif
+
+#if defined(CONFIG_405EP)
+ return (mfdcr(cpc0_pci) & CPC0_PCI_ARBIT_EN);
#endif
#if defined(CONFIG_440GP)
-#define CPC0_STRP1_PAE (0x80000000 >> 11)
+ return (mfdcr(cpc0_strp1) & CPC0_STRP1_PAE_MASK);
+#endif
+
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+ unsigned long val;
-#define PCI_ARBITER_ENABLED (mfdcr(cpc0_strp1) & CPC0_STRP1_PAE)
+ mfsdr(sdr_sdstp1, val);
+ return (val & SDR0_SDSTP1_PAE_MASK);
#endif
+}
+#endif
+
+#if defined(CONFIG_405EP)|| defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440GX) || defined(CONFIG_440SP)
-#if defined(CONFIG_440GX)
-#define SDR0_SDSTP1_PAE (0x80000000 >> 13)
+#define I2C_BOOTROM
-#define PCI_ARBITER_ENABLED (mfdcr(cpc0_strp1) & SDR0_SDSTP1_PAE)
+int i2c_bootrom_enabled(void)
+{
+#if defined(CONFIG_405EP)
+ return (mfdcr(cpc0_boot) & CPC0_BOOT_SEP);
#endif
-#if defined(CONFIG_440)
-#define FREQ_EBC (sys_info.freqEPB)
-#else
-#define FREQ_EBC (sys_info.freqPLB / sys_info.pllExtBusDiv)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+ unsigned long val;
+
+ mfsdr(sdr_sdcs, val);
+ return (val & SDR0_SDCS_SDD);
+#endif
+}
#endif
@@ -196,6 +229,14 @@ int checkcpu (void)
#endif /* CONFIG_440GR */
#endif /* CONFIG_440 */
+ case PVR_440SP_RA:
+ puts("SP Rev. A");
+ break;
+
+ case PVR_440SP_RB:
+ puts("SP Rev. B");
+ break;
+
default:
printf (" UNKNOWN (PVR=%08x)", pvr);
break;
@@ -206,17 +247,16 @@ int checkcpu (void)
sys_info.freqPLB / sys_info.pllOpbDiv / 1000000,
FREQ_EBC / 1000000);
-#if defined(I2C_BOOTROM_ENABLED)
- printf (" IIC Boot EEPROM %sabled\n", I2C_BOOTROM_ENABLED ? "en" : "dis");
+#if defined(I2C_BOOTROM)
+ printf (" I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis");
#endif
-#if defined(PCI_ARBITER_ENABLED)
- printf (" %sternal PCI arbiter enabled",
- (PCI_ARBITER_ENABLED) ? "In" : "Ex");
+#if defined(CONFIG_PCI)
+ printf (" Internal PCI arbiter %sabled", pci_arbiter_enabled() ? "en" : "dis");
#endif
-#if defined(PCI_ASYNC_ENABLED)
- if (PCI_ASYNC_ENABLED) {
+#if defined(PCI_ASYNC)
+ if (pci_async_enabled()) {
printf (", PCI async ext clock used");
} else {
printf (", PCI sync clock at %lu MHz",
@@ -224,7 +264,7 @@ int checkcpu (void)
}
#endif
-#if defined(PCI_ARBITER_ENABLED) || defined(PCI_ASYNC_ENABLED)
+#if defined(CONFIG_PCI)
putc('\n');
#endif
diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c
index f319eb8..f26f2a2 100644
--- a/cpu/ppc4xx/miiphy.c
+++ b/cpu/ppc4xx/miiphy.c
@@ -104,7 +104,7 @@ int phy_setup_aneg (char *devname, unsigned char addr)
/***********************************************************/
unsigned int miiphy_getemac_offset (void)
{
-#if defined(CONFIG_440) && defined(CONFIG_NET_MULTI)
+#if (defined(CONFIG_440) && !defined(CONFIG_440SP)) && defined(CONFIG_NET_MULTI)
unsigned long zmii;
unsigned long eoffset;
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index e06fb0d..e7f6bcb 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -276,7 +276,12 @@ int serial_tstc ()
#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000200
#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000300
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+
+#if defined(CONFIG_440SP)
+#define UART2_BASE CFG_PERIPHERAL_BASE + 0x00000600
+#endif
+
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
#define CR0_MASK 0xdfffffff
#define CR0_EXTCLK_ENA 0x00800000
#define CR0_UDIV_POS 0
@@ -306,14 +311,14 @@ int serial_tstc ()
#if defined(CONFIG_UART1_CONSOLE)
#define ACTING_UART0_BASE UART1_BASE
#define ACTING_UART1_BASE UART0_BASE
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
#define UART0_SDR sdr_uart1
#define UART1_SDR sdr_uart0
#endif /* CONFIG_440GX */
#else
#define ACTING_UART0_BASE UART0_BASE
#define ACTING_UART1_BASE UART1_BASE
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
#define UART0_SDR sdr_uart0
#define UART1_SDR sdr_uart1
#endif /* CONFIG_440GX */
@@ -436,7 +441,7 @@ int serial_init(void)
unsigned long tmp;
#endif
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
#if defined(CONFIG_SERIAL_MULTI)
if (UART0_BASE == dev_base) {
mfsdr(UART0_SDR,reg);
@@ -465,7 +470,7 @@ int serial_init(void)
serial_divs (gd->baudrate, &udiv, &bdiv);
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
reg |= udiv << CR0_UDIV_POS; /* set the UART divisor */
#if defined(CONFIG_SERIAL_MULTI)
if (UART0_BASE == dev_base) {
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index cbd7b24..553c491 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -283,7 +283,7 @@ ulong get_PCI_freq (void)
return sys_info.freqPCI;
}
-#elif !defined(CONFIG_440GX)
+#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP)
void get_sys_info (sys_info_t * sysInfo)
{
unsigned long strp0;
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 8f7e817..48b430d 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -166,7 +166,7 @@ _start_440:
mtspr srr1,r0
mtspr csrr0,r0
mtspr csrr1,r0
-#if defined (CONFIG_440GX) /* NOTE: 440GX adds machine check status regs */
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) /* NOTE: 440GX adds machine check status regs */
mtspr mcsrr0,r0
mtspr mcsrr1,r0
mfspr r1, mcsr
@@ -394,7 +394,7 @@ __440gx_msr_continue:
addi r3,r3,32
bdnz ..d_ag
#else
-#if defined (CONFIG_440GX)
+#if defined (CONFIG_440GX) || defined(CONFIG_440SP)
mtdcr l2_cache_cfg,r0 /* Ensure L2 Cache is off */
#endif
mtdcr isram0_sb1cr,r0 /* Disable bank 1 */
@@ -409,7 +409,7 @@ __440gx_msr_continue:
mtdcr isram0_pmeg,r1
lis r1,0x8000 /* BAS = 8000_0000 */
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
ori r1,r1,0x0980 /* first 64k */
mtdcr isram0_sb0cr,r1
lis r1,0x8001
@@ -432,7 +432,6 @@ __440gx_msr_continue:
/*----------------------------------------------------------------*/
lis r1,CFG_INIT_RAM_ADDR@h
ori r1,r1,CFG_INIT_SP_OFFSET@l
-
li r0,0
stwu r0,-4(r1)
stwu r0,-4(r1) /* Terminate call chain */
@@ -977,12 +976,8 @@ invalidate_icache:
invalidate_dcache:
addi r6,0,0x0000 /* clear GPR 6 */
/* Do loop for # of dcache congruence classes. */
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
lis r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS for large sized cache */
ori r7, r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l
-#else
- addi r7,r0, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)
-#endif
/* NOTE: dccci invalidates both */
mtctr r7 /* ways in the D cache */
..dcloop:
@@ -1003,15 +998,10 @@ flush_dcache:
mtdccr r10
/* do loop for # of congruence classes. */
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
lis r10,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS: for large cache sizes */
ori r10,r10,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l
lis r11,(CFG_DCACHE_SIZE / 2)@ha /* D cache set size - 2 way sets */
ori r11,r11,(CFG_DCACHE_SIZE / 2)@l /* D cache set size - 2 way sets */
-#else
- addi r10,r0,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)
- addi r11,r0,(CFG_DCACHE_SIZE / 2) /* D cache set size - 2 way sets */
-#endif
mtctr r10
addi r10,r0,(0xE000-0x10000) /* start at 0xFFFFE000 */
add r11,r10,r11 /* add to get to other side of cache line */
@@ -1233,9 +1223,9 @@ relocate_code:
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
dccci 0,0 /* Invalidate data cache, now no longer our stack */
sync
- addi r1,r0,0x0000 /* Tlb entry #0 */
+ addi r1,r0,0x0000 /* TLB entry #0 */
tlbre r0,r1,0x0002 /* Read contents */
- ori r0,r0,0x0c00 /* Or in the inhibit, write through bit */
+ ori r0,r0,0x0c00 /* Or in the inhibit, write through bit */
tlbwe r0,r1,0x0002 /* Save it out */
isync
#endif
diff --git a/cpu/ppc4xx/vecnum.h b/cpu/ppc4xx/vecnum.h
index 1038975..cbfe41d 100644
--- a/cpu/ppc4xx/vecnum.h
+++ b/cpu/ppc4xx/vecnum.h
@@ -31,7 +31,35 @@
#ifndef _VECNUMS_H_
#define _VECNUMS_H_
-#if defined(CONFIG_440)
+#if defined(CONFIG_440SP)
+
+/* UIC 0 */
+#define VECNUM_U0 0 /* UART0 */
+#define VECNUM_U1 1 /* UART1 */
+#define VECNUM_IIC0 2 /* IIC0 */
+#define VECNUM_IIC1 3 /* IIC1 */
+#define VECNUM_PIM 4 /* PCI inbound message */
+#define VECNUM_PCRW 5 /* PCI command reg write */
+#define VECNUM_PPM 6 /* PCI power management */
+#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
+#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
+
+/* UIC 1 */
+#define VECNUM_EIR0 (32 + 0) /* External interrupt 0 */
+#define VECNUM_MS (32 + 1) /* MAL SERR */
+#define VECNUM_TXDE (32 + 2) /* MAL TXDE */
+#define VECNUM_RXDE (32 + 3) /* MAL RXDE */
+#define VECNUM_MTE (32 + 6) /* MAL Tx EOB */
+#define VECNUM_MRE (32 + 7) /* MAL Rx EOB */
+#define VECNUM_CT0 (32 + 12) /* GPT compare timer 0 */
+#define VECNUM_CT1 (32 + 13) /* GPT compare timer 1 */
+#define VECNUM_CT2 (32 + 14) /* GPT compare timer 2 */
+#define VECNUM_CT3 (32 + 15) /* GPT compare timer 3 */
+#define VECNUM_CT4 (32 + 16) /* GPT compare timer 4 */
+#define VECNUM_ETH0 (32 + 28) /* Ethernet interrupt status */
+#define VECNUM_EWU0 (32 + 29) /* Emac wakeup */
+
+#elif defined(CONFIG_440)
/* UIC 0 */
#define VECNUM_U0 0 /* UART0 */
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 0b30d2d..8113783 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -731,6 +731,8 @@
#define PVR_440GX_RC 0x51B21892
#define PVR_440GX_RF 0x51B21894
#define PVR_405EP_RB 0x51210950
+#define PVR_440SP_RA 0x53221850
+#define PVR_440SP_RB 0x53221891
#define PVR_601 0x00010000
#define PVR_602 0x00050000
#define PVR_603 0x00030000
diff --git a/include/configs/luan.h b/include/configs/luan.h
new file mode 100644
index 0000000..0335a00
--- /dev/null
+++ b/include/configs/luan.h
@@ -0,0 +1,306 @@
+/*
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ * John Otken, jotken@softadvances.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * luan.h - configuration for LUAN board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_LUAN 1 /* Board is Luan */
+#define CONFIG_440SP 1 /* Specific PPC440SP support */
+#define CONFIG_4xx 1 /* PPC4xx family */
+#define CONFIG_440 1
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
+#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc */
+#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN)
+#define CFG_SDRAM_BASE 0x00000000 /* MUST be zero */
+
+#define CFG_LARGE_FLASH 0xffc00000 /* 4MB flash address CS0 */
+#define CFG_SMALL_FLASH 0xff900000 /* 1MB flash address CS2 */
+#define CFG_SRAM_BASE 0xff800000 /* 1MB SRAM address CS2 */
+#define CFG_EPLD_BASE 0xff000000 /* EPLD and FRAM CS1 */
+
+#define CFG_ISRAM_BASE 0xf8000000 /* internal 8k SRAM (L2 cache) */
+
+#define CFG_PERIPHERAL_BASE 0xf0000000 /* internal peripherals */
+
+#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
+#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+
+#if CFG_LARGE_FLASH == 0xffc00000
+#define CFG_FLASH_BASE CFG_LARGE_FLASH
+#else
+#define CFG_FLASH_BASE CFG_SMALL_FLASH
+#endif
+
+#undef CFG_DRAM_TEST
+#if CFG_SRAM_BASE
+#define CFG_KBYTES_SDRAM 1024*2
+#else
+#define CFG_KBYTES_SDRAM 1024
+#endif
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in SDRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE
+#define CFG_INIT_RAM_END (8 << 10)
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CFG_EXT_SERIAL_CLOCK 11059200 /* external 11.059MHz clk */
+#define CONFIG_BAUDRATE 115200
+#undef CONFIG_SERIAL_MULTI
+#undef CONFIG_UART1_CONSOLE /* define if you want console on UART1 */
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+/*
+ * Define here the location of the environment variables (FLASH or EEPROM).
+ * Note: DENX encourages to use redundant environment in FLASH.
+ */
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+#define CFG_FLASH_ADDR0 0x555
+#define CFG_FLASH_ADDR1 0x2aa
+#define CFG_FLASH_WORD_SIZE unsigned char
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SPD_EEPROM /* SPD EEPROM init doesn't support DDR2 */
+#define SPD_EEPROM_ADDRESS {0x52,0x53} /* I2C SPD addresses */
+#define IIC0_DIMM0_ADDR 0x52
+#define IIC0_DIMM1_ADDR 0x53
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=luan\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "bootfile=/tftpboot/luan/uImage\0" \
+ "kernel_addr=fc000000\0" \
+ "ramdisk_addr=fc100000\0" \
+ "load=tftp 100000 /tftpboot/luan/u-boot.bin\0" \
+ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
+ "cp.b 100000 fffc0000 40000;" \
+ "setenv filesize;saveenv\0" \
+ "upd=run load;run update\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 1
+#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NETCONSOLE /* include NetConsole support */
+#define CONFIG_NET_MULTI /* needed for NetConsole */
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#ifdef DEBUG
+#define CONFIG_PANIC_HANG
+#else
+#define CONFIG_HW_WATCHDOG /* watchdog */
+#endif
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_CACHE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_MII | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SETGETDCR | \
+ CFG_CMD_SDRAM | \
+ 0)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+#undef CONFIG_LYNXKDI /* support kdi files */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_PCI)
+
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
+#define CFG_PCI_TARGET_INIT
+#undef CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
+#define CFG_PCI_SUBSYS_DEVICEID 0x4403 /* whatever */
+
+#endif /* CONFIG_COMMANDS & CFG_CMD_PCI */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/ppc440.h b/include/ppc440.h
index 41db16f..018f7be 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -78,7 +78,7 @@
#define ivor13 0x19d /* interrupt vector offset register 13 */
#define ivor14 0x19e /* interrupt vector offset register 14 */
#define ivor15 0x19f /* interrupt vector offset register 15 */
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
#define mcsrr0 0x23a /* machine check save/restore register 0 */
#define mcsrr1 0x23b /* mahcine check save/restore register 1 */
#define mcsr 0x23c /* machine check status register */
@@ -178,7 +178,6 @@
#define sdr_plbtr 0x4200
#define sdr_mfr 0x4300 /* SDR0_MFR reg */
-
/*-----------------------------------------------------------------------------
| SDRAM Controller
+----------------------------------------------------------------------------*/
@@ -504,7 +503,7 @@
/*-----------------------------------------------------------------------------
| L2 Cache
+----------------------------------------------------------------------------*/
-#if defined (CONFIG_440GX)
+#if defined (CONFIG_440GX) || defined(CONFIG_440SP)
#define L2_CACHE_BASE 0x030
#define l2_cache_cfg (L2_CACHE_BASE+0x00) /* L2 Cache Config */
#define l2_cache_cmd (L2_CACHE_BASE+0x01) /* L2 Cache Command */
@@ -527,7 +526,7 @@
| Clocking, Power Management and Chip Control
+----------------------------------------------------------------------------*/
#define CNTRL_DCR_BASE 0x0b0
-#if defined (CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
#define cpc0_er (CNTRL_DCR_BASE+0x00) /* CPM enable register */
#define cpc0_fr (CNTRL_DCR_BASE+0x01) /* CPM force register */
#define cpc0_sr (CNTRL_DCR_BASE+0x02) /* CPM status register */
@@ -690,6 +689,40 @@
/*---------------------------------------------------------------------------+
| Universal interrupt controller 0 interrupts (UIC0)
+---------------------------------------------------------------------------*/
+#if defined(CONFIG_440SP)
+#define UIC_U0 0x80000000 /* UART 0 */
+#define UIC_U1 0x40000000 /* UART 1 */
+#define UIC_IIC0 0x20000000 /* IIC */
+#define UIC_IIC1 0x10000000 /* IIC */
+#define UIC_PIM 0x08000000 /* PCI0 inbound message */
+#define UIC_PCRW 0x04000000 /* PCI0 command write register */
+#define UIC_PPM 0x02000000 /* PCI0 power management */
+#define UIC_PVPD 0x01000000 /* PCI0 VPD Access */
+#define UIC_MSI0 0x00800000 /* PCI0 MSI level 0 */
+#define UIC_P1IM 0x00400000 /* PCI1 Inbound Message */
+#define UIC_P1CRW 0x00200000 /* PCI1 command write register */
+#define UIC_P1PM 0x00100000 /* PCI1 power management */
+#define UIC_P1VPD 0x00080000 /* PCI1 VPD Access */
+#define UIC_P1MSI0 0x00040000 /* PCI1 MSI level 0 */
+#define UIC_P2IM 0x00020000 /* PCI2 inbound message */
+#define UIC_P2CRW 0x00010000 /* PCI2 command register write */
+#define UIC_P2PM 0x00008000 /* PCI2 power management */
+#define UIC_P2VPD 0x00004000 /* PCI2 VPD access */
+#define UIC_P2MSI0 0x00002000 /* PCI2 MSI level 0 */
+#define UIC_D0CPF 0x00001000 /* DMA0 command pointer */
+#define UIC_D0CSF 0x00000800 /* DMA0 command status */
+#define UIC_D1CPF 0x00000400 /* DMA1 command pointer */
+#define UIC_D1CSF 0x00000200 /* DMA1 command status */
+#define UIC_I2OID 0x00000100 /* I2O inbound doorbell */
+#define UIC_I2OPLF 0x00000080 /* I2O inbound post list */
+#define UIC_I2O0LL 0x00000040 /* I2O0 low latency PLB write */
+#define UIC_I2O1LL 0x00000020 /* I2O1 low latency PLB write */
+#define UIC_I2O0HB 0x00000010 /* I2O0 high bandwidth PLB write */
+#define UIC_I2O1HB 0x00000008 /* I2O1 high bandwidth PLB write */
+#define UIC_GPTCT 0x00000004 /* GPT count timer */
+#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
+#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
+#else /* CONFIG_440SP */
#define UIC_U0 0x80000000 /* UART 0 */
#define UIC_U1 0x40000000 /* UART 1 */
#define UIC_IIC0 0x20000000 /* IIC */
@@ -722,6 +755,7 @@
#define UIC_EIR6 0x00000004 /* External interrupt 6 */
#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
+#endif /* CONFIG_440SP */
/* For compatibility with 405 code */
#define UIC_MAL_TXEOB UIC_MTE
@@ -730,6 +764,40 @@
/*---------------------------------------------------------------------------+
| Universal interrupt controller 1 interrupts (UIC1)
+---------------------------------------------------------------------------*/
+#if defined(CONFIG_440SP)
+#define UIC_EIR0 0x80000000 /* External interrupt 0 */
+#define UIC_MS 0x40000000 /* MAL SERR */
+#define UIC_MTDE 0x20000000 /* MAL TXDE */
+#define UIC_MRDE 0x10000000 /* MAL RXDE */
+#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */
+#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
+#define UIC_MTE 0x02000000 /* MAL TXEOB */
+#define UIC_MRE 0x01000000 /* MAL RXEOB */
+#define UIC_P0MSI1 0x00800000 /* PCI0 MSI level 1 */
+#define UIC_P1MSI1 0x00400000 /* PCI1 MSI level 1 */
+#define UIC_P2MSI1 0x00200000 /* PCI2 MSI level 1 */
+#define UIC_L2C 0x00100000 /* L2 cache */
+#define UIC_CT0 0x00080000 /* GPT compare timer 0 */
+#define UIC_CT1 0x00040000 /* GPT compare timer 1 */
+#define UIC_CT2 0x00020000 /* GPT compare timer 2 */
+#define UIC_CT3 0x00010000 /* GPT compare timer 3 */
+#define UIC_CT4 0x00008000 /* GPT compare timer 4 */
+#define UIC_EIR1 0x00004000 /* External interrupt 1 */
+#define UIC_EIR2 0x00002000 /* External interrupt 2 */
+#define UIC_EIR3 0x00001000 /* External interrupt 3 */
+#define UIC_EIR4 0x00000800 /* External interrupt 4 */
+#define UIC_EIR5 0x00000400 /* External interrupt 5 */
+#define UIC_DMAE 0x00000200 /* DMA error */
+#define UIC_I2OE 0x00000100 /* I2O error */
+#define UIC_SRE 0x00000080 /* Serial ROM error */
+#define UIC_P0AE 0x00000040 /* PCI0 asynchronous error */
+#define UIC_P1AE 0x00000020 /* PCI1 asynchronous error */
+#define UIC_P2AE 0x00000010 /* PCI2 asynchronous error */
+#define UIC_ETH0 0x00000008 /* Ethernet 0 */
+#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
+#define UIC_ETH1 0x00000002 /* Reserved */
+#define UIC_XOR 0x00000001 /* XOR */
+#else /* CONFIG_440SP */
#define UIC_MS 0x80000000 /* MAL SERR */
#define UIC_MTDE 0x40000000 /* MAL TXDE */
#define UIC_MRDE 0x20000000 /* MAL RXDE */
@@ -762,6 +830,7 @@
#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
#define UIC_ETH1 0x00000002 /* Ethernet 1 */
#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
+#endif /* CONFIG_440SP */
/* For compatibility with 405 code */
#define UIC_MAL_SERR UIC_MS
@@ -850,6 +919,11 @@
#define EBC_BXAP_TWT_ENCODE(n) ((((unsigned long)(n))&0xFF)<<23)
#define EBC_BXAP_BCE_DISABLE 0x00000000
#define EBC_BXAP_BCE_ENABLE 0x00400000
+#define EBC_BXAP_BCT_MASK 0x00300000
+#define EBC_BXAP_BCT_2TRANS 0x00000000
+#define EBC_BXAP_BCT_4TRANS 0x00100000
+#define EBC_BXAP_BCT_8TRANS 0x00200000
+#define EBC_BXAP_BCT_16TRANS 0x00300000
#define EBC_BXAP_CSN_ENCODE(n) ((((unsigned long)(n))&0x3)<<18)
#define EBC_BXAP_OEN_ENCODE(n) ((((unsigned long)(n))&0x3)<<16)
#define EBC_BXAP_WBN_ENCODE(n) ((((unsigned long)(n))&0x3)<<14)
@@ -905,133 +979,22 @@
#define EBC_CFG_PR_128 0x0000C000
/*-----------------------------------------------------------------------------+
-| SDR 0 Bit Settings
+| SDR0 Bit Settings
+-----------------------------------------------------------------------------*/
-#define SDR0_SDSTP0_ENG_MASK 0x80000000
-#define SDR0_SDSTP0_ENG_PLLDIS 0x00000000
-#define SDR0_SDSTP0_ENG_PLLENAB 0x80000000
-#define SDR0_SDSTP0_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<31)
-#define SDR0_SDSTP0_ENG_DECODE(n) ((((unsigned long)(n))>>31)&0x01)
-#define SDR0_SDSTP0_SRC_MASK 0x40000000
-#define SDR0_SDSTP0_SRC_PLLOUTA 0x00000000
-#define SDR0_SDSTP0_SRC_PLLOUTB 0x40000000
-#define SDR0_SDSTP0_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
-#define SDR0_SDSTP0_SRC_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
-#define SDR0_SDSTP0_SEL_MASK 0x38000000
-#define SDR0_SDSTP0_SEL_PLLOUT 0x00000000
-#define SDR0_SDSTP0_SEL_CPU 0x08000000
-#define SDR0_SDSTP0_SEL_EBC 0x28000000
-#define SDR0_SDSTP0_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<27)
-#define SDR0_SDSTP0_SEL_DECODE(n) ((((unsigned long)(n))>>27)&0x07)
-#define SDR0_SDSTP0_TUNE_MASK 0x07FE0000
-#define SDR0_SDSTP0_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<17)
-#define SDR0_SDSTP0_TUNE_DECODE(n) ((((unsigned long)(n))>>17)&0x3FF)
-#define SDR0_SDSTP0_FBDV_MASK 0x0001F000
-#define SDR0_SDSTP0_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<12)
-#define SDR0_SDSTP0_FBDV_DECODE(n) ((((((unsigned long)(n))>>12)-1)&0x1F)+1)
-#define SDR0_SDSTP0_FWDVA_MASK 0x00000F00
-#define SDR0_SDSTP0_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<8)
-#define SDR0_SDSTP0_FWDVA_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x0F)+1)
-#define SDR0_SDSTP0_FWDVB_MASK 0x000000E0
-#define SDR0_SDSTP0_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<5)
-#define SDR0_SDSTP0_FWDVB_DECODE(n) ((((((unsigned long)(n))>>5)-1)&0x07)+1)
-#define SDR0_SDSTP0_PRBDV0_MASK 0x0000001C
-#define SDR0_SDSTP0_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<2)
-#define SDR0_SDSTP0_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>2)-1)&0x07)+1)
-#define SDR0_SDSTP0_OPBDV0_MASK 0x00000003
-#define SDR0_SDSTP0_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<0)
-#define SDR0_SDSTP0_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x03)+1)
-
-#define SDR0_SDSTP1_LFBDV_MASK 0xFC000000
-#define SDR0_SDSTP1_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<26)
-#define SDR0_SDSTP1_LFBDV_DECODE(n) ((((unsigned long)(n))>>26)&0x3F)
-#define SDR0_SDSTP1_EBCDV0_MASK 0x03000000
-#define SDR0_SDSTP1_EBCDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
-#define SDR0_SDSTP1_EBCDV0_DECODE(n) ((((unsigned long)(n))>>24)&0x03)
-#define SDR0_SDSTP1_MALDV0_MASK 0x00C00000
-#define SDR0_SDSTP1_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<22)
-#define SDR0_SDSTP1_MALDV0_DECODE(n) ((((unsigned long)(n))>>22)&0x03)
-#define SDR0_SDSTP1_RW_MASK 0x00300000
-#define SDR0_SDSTP1_RW_8BIT 0x00000000
-#define SDR0_SDSTP1_RW_16BIT 0x00100000
-#define SDR0_SDSTP1_RW_32BIT 0x00200000
-#define SDR0_SDSTP1_RW_ENCODE(n) ((((unsigned long)(n))&0x03)<<20)
-#define SDR0_SDSTP1_RW_DECODE(n) ((((unsigned long)(n))>>20)&0x03)
-#define SDR0_SDSTP1_EARV_MASK 0x00080000
-#define SDR0_SDSTP1_EARV_EBC 0x00000000
-#define SDR0_SDSTP1_EARV_PCI 0x00080000
-#define SDR0_SDSTP1_PAE_MASK 0x00040000
-#define SDR0_SDSTP1_PAE_DISABLE 0x00000000
-#define SDR0_SDSTP1_PAE_ENABLE 0x00040000
-#define SDR0_SDSTP1_PAE_ENCODE(n) ((((unsigned long)(n))&0x01)<<18)
-#define SDR0_SDSTP1_PAE_DECODE(n) ((((unsigned long)(n))>>18)&0x01)
-#define SDR0_SDSTP1_PHCE_MASK 0x00020000
-#define SDR0_SDSTP1_PHCE_DISABLE 0x00000000
-#define SDR0_SDSTP1_PHCE_ENABLE 0x00020000
-#define SDR0_SDSTP1_PHCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<17)
-#define SDR0_SDSTP1_PHCE_DECODE(n) ((((unsigned long)(n))>>17)&0x01)
-#define SDR0_SDSTP1_PISE_MASK 0x00010000
-#define SDR0_SDSTP1_PISE_DISABLE 0x00000000
-#define SDR0_SDSTP1_PISE_ENABLE 0x00010000
-#define SDR0_SDSTP1_PISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<16)
-#define SDR0_SDSTP1_PISE_DECODE(n) ((((unsigned long)(n))>>16)&0x01)
-#define SDR0_SDSTP1_PCWE_MASK 0x00008000
-#define SDR0_SDSTP1_PCWE_DISABLE 0x00000000
-#define SDR0_SDSTP1_PCWE_ENABLE 0x00008000
-#define SDR0_SDSTP1_PCWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<15)
-#define SDR0_SDSTP1_PCWE_DECODE(n) ((((unsigned long)(n))>>15)&0x01)
-#define SDR0_SDSTP1_PPIM_MASK 0x00008000
-#define SDR0_SDSTP1_PPIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<11)
-#define SDR0_SDSTP1_PPIM_DECODE(n) ((((unsigned long)(n))>>11)&0x0F)
-#define SDR0_SDSTP1_PR64E_MASK 0x00000400
-#define SDR0_SDSTP1_PR64E_DISABLE 0x00000000
-#define SDR0_SDSTP1_PR64E_ENABLE 0x00000400
-#define SDR0_SDSTP1_PR64E_ENCODE(n) ((((unsigned long)(n))&0x01)<<10)
-#define SDR0_SDSTP1_PR64E_DECODE(n) ((((unsigned long)(n))>>10)&0x01)
-#define SDR0_SDSTP1_PXFS_MASK 0x00000300
-#define SDR0_SDSTP1_PXFS_HIGH 0x00000000
-#define SDR0_SDSTP1_PXFS_MED 0x00000100
-#define SDR0_SDSTP1_PXFS_LOW 0x00000200
-#define SDR0_SDSTP1_PXFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<8)
-#define SDR0_SDSTP1_PXFS_DECODE(n) ((((unsigned long)(n))>>8)&0x03)
-#define SDR0_SDSTP1_PDM_MASK 0x00000040
-#define SDR0_SDSTP1_PDM_MULTIPOINT 0x00000000
-#define SDR0_SDSTP1_PDM_P2P 0x00000040
-#define SDR0_SDSTP1_PDM_ENCODE(n) ((((unsigned long)(n))&0x01)<<6)
-#define SDR0_SDSTP1_PDM_DECODE(n) ((((unsigned long)(n))>>6)&0x01)
-#define SDR0_SDSTP1_EPS_MASK 0x00000038
-#define SDR0_SDSTP1_EPS_GROUP0 0x00000000
-#define SDR0_SDSTP1_EPS_GROUP1 0x00000008
-#define SDR0_SDSTP1_EPS_GROUP2 0x00000010
-#define SDR0_SDSTP1_EPS_GROUP3 0x00000018
-#define SDR0_SDSTP1_EPS_GROUP4 0x00000020
-#define SDR0_SDSTP1_EPS_GROUP5 0x00000028
-#define SDR0_SDSTP1_EPS_GROUP6 0x00000030
-#define SDR0_SDSTP1_EPS_GROUP7 0x00000038
-#define SDR0_SDSTP1_EPS_ENCODE(n) ((((unsigned long)(n))&0x07)<<3)
-#define SDR0_SDSTP1_EPS_DECODE(n) ((((unsigned long)(n))>>3)&0x07)
-#define SDR0_SDSTP1_RMII_MASK 0x00000004
-#define SDR0_SDSTP1_RMII_100MBIT 0x00000000
-#define SDR0_SDSTP1_RMII_10MBIT 0x00000004
-#define SDR0_SDSTP1_RMII_ENCODE(n) ((((unsigned long)(n))&0x01)<<2)
-#define SDR0_SDSTP1_RMII_DECODE(n) ((((unsigned long)(n))>>2)&0x01)
-#define SDR0_SDSTP1_TRE_MASK 0x00000002
-#define SDR0_SDSTP1_TRE_DISABLE 0x00000000
-#define SDR0_SDSTP1_TRE_ENABLE 0x00000002
-#define SDR0_SDSTP1_TRE_ENCODE(n) ((((unsigned long)(n))&0x01)<<1)
-#define SDR0_SDSTP1_TRE_DECODE(n) ((((unsigned long)(n))>>1)&0x01)
-#define SDR0_SDSTP1_NTO1_MASK 0x00000001
-#define SDR0_SDSTP1_NTO1_DISABLE 0x00000000
-#define SDR0_SDSTP1_NTO1_ENABLE 0x00000001
-#define SDR0_SDSTP1_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<0)
-#define SDR0_SDSTP1_NTO1_DECODE(n) ((((unsigned long)(n))>>0)&0x01)
-
-#define SDR0_EBC_RW_MASK 0x30000000
-#define SDR0_EBC_RW_8BIT 0x00000000
-#define SDR0_EBC_RW_16BIT 0x10000000
-#define SDR0_EBC_RW_32BIT 0x20000000
-#define SDR0_EBC_RW_ENCODE(n) ((((unsigned long)(n))&0x03)<<28)
-#define SDR0_EBC_RW_DECODE(n) ((((unsigned long)(n))>>28)&0x03)
+#define SDR0_SDCS_SDD (0x80000000 >> 31)
+
+#if defined(CONFIG_440GP)
+#define CPC0_STRP1_PAE_MASK (0x80000000 >> 11)
+#define CPC0_STRP1_PISE_MASK (0x80000000 >> 13)
+#endif /* defined(CONFIG_440GP) */
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 13)
+#define SDR0_SDSTP1_PISE_MASK (0x80000000 >> 15)
+#endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 21)
+#define SDR0_SDSTP1_PAME_MASK (0x80000000 >> 27)
+#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
#define SDR0_UARTX_UXICS_MASK 0xF0000000
#define SDR0_UARTX_UXICS_PLB 0x20000000
@@ -1196,7 +1159,7 @@
/*-----------------------------------------------------------------------------+
| Clocking
+-----------------------------------------------------------------------------*/
-#if !defined (CONFIG_440GX) && !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
+#if !defined (CONFIG_440GX) && !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && !defined(CONFIG_440SP)
#define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */
#define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */
#define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */
diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h
index eacfb68..d6d33b6 100644
--- a/include/ppc4xx_enet.h
+++ b/include/ppc4xx_enet.h
@@ -131,7 +131,9 @@ typedef struct emac_4xx_hw_st {
#if defined(CONFIG_440GX)
#define EMAC_NUM_DEV 4
-#elif (defined(CONFIG_440) || defined(CONFIG_405EP)) && defined(CONFIG_NET_MULTI)
+#elif (defined(CONFIG_440) || defined(CONFIG_405EP)) && \
+ defined(CONFIG_NET_MULTI) && \
+ !defined(CONFIG_440SP)
#define EMAC_NUM_DEV 2
#else
#define EMAC_NUM_DEV 1
@@ -321,7 +323,7 @@ typedef struct emac_4xx_hw_st {
#define EMAC_M0_WKE (0x04000000)
/* on 440GX EMAC_MR1 has a different layout! */
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
/* MODE Reg 1 */
#define EMAC_M1_FDE (0x80000000)
#define EMAC_M1_ILE (0x40000000)