Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'

Conflicts:
	spl/Makefile

42 files changed, 1360 insertions, 471 deletions

diff --git a/arch/arm/cpu/armv7/exynos/Makefile b/arch/arm/cpu/armv7/exynos/Makefile
index 9119961..b2f9152 100644
--- a/arch/arm/cpu/armv7/exynos/Makefile
+++ b/arch/arm/cpu/armv7/exynos/Makefile
@@ -22,7 +22,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(SOC).o
 
-COBJS	+= clock.o power.o soc.o system.o pinmux.o
+COBJS	+= clock.o power.o soc.o system.o pinmux.o tzpc.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index 223660a..e1c4246 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -116,10 +116,8 @@ static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k)
 		/* FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV) */
 		fout = (m + k / 1024) * (freq / (p * (1 << s)));
 	} else {
-		if (s < 1)
-			s = 1;
-		/* FOUT = MDIV * FIN / (PDIV * 2^(SDIV - 1)) */
-		fout = m * (freq / (p * (1 << (s - 1))));
+		/* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */
+		fout = m * (freq / (p * (1 << s)));
 	}
 
 	return fout;
@@ -613,7 +611,7 @@ static unsigned long exynos4_get_mmc_clk(int dev_index)
 		(struct exynos4_clock *)samsung_get_base_clock();
 	unsigned long uclk, sclk;
 	unsigned int sel, ratio, pre_ratio;
-	int shift;
+	int shift = 0;
 
 	sel = readl(&clk->src_fsys);
 	sel = (sel >> (dev_index << 2)) & 0xf;
@@ -662,7 +660,7 @@ static unsigned long exynos5_get_mmc_clk(int dev_index)
 		(struct exynos5_clock *)samsung_get_base_clock();
 	unsigned long uclk, sclk;
 	unsigned int sel, ratio, pre_ratio;
-	int shift;
+	int shift = 0;
 
 	sel = readl(&clk->src_fsys);
 	sel = (sel >> (dev_index << 2)) & 0xf;
diff --git a/board/samsung/smdk5250/tzpc_init.c b/arch/arm/cpu/armv7/exynos/tzpc.c
index c833541..f5e8e9c 100644
--- a/board/samsung/smdk5250/tzpc_init.c
+++ b/arch/arm/cpu/armv7/exynos/tzpc.c
@@ -22,27 +22,36 @@
  * MA 02111-1307 USA
  */
 
+#include <common.h>
 #include <asm/arch/tzpc.h>
-#include"setup.h"
+#include <asm/io.h>
 
 /* Setting TZPC[TrustZone Protection Controller] */
 void tzpc_init(void)
 {
 	struct exynos_tzpc *tzpc;
-	unsigned int addr;
+	unsigned int addr, start = 0, end = 0;
 
-	for (addr = TZPC0_BASE; addr <= TZPC9_BASE; addr += TZPC_BASE_OFFSET) {
+	start = samsung_get_base_tzpc();
+
+	if (cpu_is_exynos5())
+		end = start + ((EXYNOS5_NR_TZPC_BANKS - 1) * TZPC_BASE_OFFSET);
+	else if (cpu_is_exynos4())
+		end = start + ((EXYNOS4_NR_TZPC_BANKS - 1) * TZPC_BASE_OFFSET);
+
+	for (addr = start; addr <= end; addr += TZPC_BASE_OFFSET) {
 		tzpc = (struct exynos_tzpc *)addr;
 
-		if (addr == TZPC0_BASE)
+		if (addr == start)
 			writel(R0SIZE, &tzpc->r0size);
 
 		writel(DECPROTXSET, &tzpc->decprot0set);
 		writel(DECPROTXSET, &tzpc->decprot1set);
 
-		if (addr != TZPC9_BASE) {
-			writel(DECPROTXSET, &tzpc->decprot2set);
-			writel(DECPROTXSET, &tzpc->decprot3set);
-		}
+		if (cpu_is_exynos5() && (addr == end))
+			break;
+
+		writel(DECPROTXSET, &tzpc->decprot2set);
+		writel(DECPROTXSET, &tzpc->decprot3set);
 	}
 }
diff --git a/arch/arm/cpu/armv7/s5p-common/Makefile b/arch/arm/cpu/armv7/s5p-common/Makefile
index 1705399..0c38bd0 100644
--- a/arch/arm/cpu/armv7/s5p-common/Makefile
+++ b/arch/arm/cpu/armv7/s5p-common/Makefile
@@ -26,9 +26,11 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)libs5p-common.o
 
 COBJS-y		+= cpu_info.o
+ifndef CONFIG_SPL_BUILD
 COBJS-y		+= timer.o
 COBJS-y		+= sromc.o
 COBJS-$(CONFIG_PWM)	+= pwm.o
+endif
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS-y) $(SOBJS))
diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi
index df4b231..cee4fe8 100644
--- a/arch/arm/dts/exynos5250.dtsi
+++ b/arch/arm/dts/exynos5250.dtsi
@@ -169,4 +169,37 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
+
+	mmc@12200000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5250-dwmmc";
+		reg = <0x12200000 0x1000>;
+		interrupts = <0 75 0>;
+	};
+
+	mmc@12210000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5250-dwmmc";
+		reg = <0x12210000 0x1000>;
+		interrupts = <0 76 0>;
+	};
+
+	mmc@12220000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5250-dwmmc";
+		reg = <0x12220000 0x1000>;
+		interrupts = <0 77 0>;
+	};
+
+	mmc@12230000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "samsung,exynos5250-dwmmc";
+		reg = <0x12230000 0x1000>;
+		interrupts = <0 78 0>;
+	};
+
 };
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index f76e489..36b98c8 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -38,6 +38,7 @@
 #define EXYNOS4_CLOCK_BASE		0x10030000
 #define EXYNOS4_SYSTIMER_BASE		0x10050000
 #define EXYNOS4_WATCHDOG_BASE		0x10060000
+#define EXYNOS4_TZPC_BASE		0x10110000
 #define EXYNOS4_MIU_BASE		0x10600000
 #define EXYNOS4_DMC0_BASE		0x10400000
 #define EXYNOS4_DMC1_BASE		0x10410000
@@ -74,6 +75,7 @@
 #define EXYNOS4X12_CLOCK_BASE		0x10030000
 #define EXYNOS4X12_SYSTIMER_BASE	0x10050000
 #define EXYNOS4X12_WATCHDOG_BASE	0x10060000
+#define EXYNOS4X12_TZPC_BASE		0x10110000
 #define EXYNOS4X12_DMC0_BASE		0x10600000
 #define EXYNOS4X12_DMC1_BASE		0x10610000
 #define EXYNOS4X12_GPIO_PART4_BASE	0x106E0000
@@ -107,6 +109,7 @@
 #define EXYNOS5_POWER_BASE		0x10040000
 #define EXYNOS5_SWRESET			0x10040400
 #define EXYNOS5_SYSREG_BASE		0x10050000
+#define EXYNOS5_TZPC_BASE		0x10100000
 #define EXYNOS5_WATCHDOG_BASE		0x101D0000
 #define EXYNOS5_ACE_SFR_BASE            0x10830000
 #define EXYNOS5_DMC_PHY0_BASE		0x10C00000
@@ -233,6 +236,7 @@ SAMSUNG_BASE(watchdog, WATCHDOG_BASE)
 SAMSUNG_BASE(power, POWER_BASE)
 SAMSUNG_BASE(spi, SPI_BASE)
 SAMSUNG_BASE(spi_isp, SPI_ISP_BASE)
+SAMSUNG_BASE(tzpc, TZPC_BASE)
 #endif
 
 #endif	/* _EXYNOS4_CPU_H */
diff --git a/arch/arm/include/asm/arch-exynos/dwmmc.h b/arch/arm/include/asm/arch-exynos/dwmmc.h
index 8acdf9b..3b147b8 100644
--- a/arch/arm/include/asm/arch-exynos/dwmmc.h
+++ b/arch/arm/include/asm/arch-exynos/dwmmc.h
@@ -27,10 +27,7 @@
 #define DWMCI_SET_DRV_CLK(x)	((x) << 16)
 #define DWMCI_SET_DIV_RATIO(x)	((x) << 24)
 
-int exynos_dwmci_init(u32 regbase, int bus_width, int index);
-
-static inline unsigned int exynos_dwmmc_init(int index, int bus_width)
-{
-	unsigned int base = samsung_get_base_mmc() + (0x10000 * index);
-	return exynos_dwmci_init(base, bus_width, index);
-}
+#ifdef CONFIG_OF_CONTROL
+int exynos_dwmmc_init(const void *blob);
+#endif
+int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel);
diff --git a/arch/arm/include/asm/arch-exynos/tmu.h b/arch/arm/include/asm/arch-exynos/tmu.h
index 7e0158e..cad3569 100644
--- a/arch/arm/include/asm/arch-exynos/tmu.h
+++ b/arch/arm/include/asm/arch-exynos/tmu.h
@@ -21,38 +21,30 @@
 #define __ASM_ARCH_TMU_H
 
 struct exynos5_tmu_reg {
-	unsigned triminfo;
-	unsigned rsvd1;
-	unsigned rsvd2;
-	unsigned rsvd3;
-	unsigned rsvd4;
-	unsigned triminfo_control;
-	unsigned rsvd5;
-	unsigned rsvd6;
-	unsigned tmu_control;
-	unsigned rsvd7;
-	unsigned tmu_status;
-	unsigned sampling_internal;
-	unsigned counter_value0;
-	unsigned counter_value1;
-	unsigned rsvd8;
-	unsigned rsvd9;
-	unsigned current_temp;
-	unsigned rsvd10;
-	unsigned rsvd11;
-	unsigned rsvd12;
-	unsigned threshold_temp_rise;
-	unsigned threshold_temp_fall;
-	unsigned rsvd13;
-	unsigned rsvd14;
-	unsigned past_temp3_0;
-	unsigned past_temp7_4;
-	unsigned past_temp11_8;
-	unsigned past_temp15_12;
-	unsigned inten;
-	unsigned intstat;
-	unsigned intclear;
-	unsigned rsvd15;
-	unsigned emul_con;
+	u32 triminfo;
+	u32 rsvd1[4];
+	u32 triminfo_control;
+	u32 rsvd5[2];
+	u32 tmu_control;
+	u32 rsvd7;
+	u32 tmu_status;
+	u32 sampling_internal;
+	u32 counter_value0;
+	u32 counter_value1;
+	u32 rsvd8[2];
+	u32 current_temp;
+	u32 rsvd10[3];
+	u32 threshold_temp_rise;
+	u32 threshold_temp_fall;
+	u32 rsvd13[2];
+	u32 past_temp3_0;
+	u32 past_temp7_4;
+	u32 past_temp11_8;
+	u32 past_temp15_12;
+	u32 inten;
+	u32 intstat;
+	u32 intclear;
+	u32 rsvd15;
+	u32 emul_con;
 };
 #endif /* __ASM_ARCH_TMU_H */
diff --git a/arch/arm/include/asm/arch-exynos/tzpc.h b/arch/arm/include/asm/arch-exynos/tzpc.h
index c5eb4b1..4d9c3a3 100644
--- a/arch/arm/include/asm/arch-exynos/tzpc.h
+++ b/arch/arm/include/asm/arch-exynos/tzpc.h
@@ -47,6 +47,26 @@ struct exynos_tzpc {
 	unsigned int pcellid2;
 	unsigned int pcellid3;
 };
+
+#define EXYNOS4_NR_TZPC_BANKS		6
+#define EXYNOS5_NR_TZPC_BANKS		10
+
+/* TZPC : Register Offsets */
+#define TZPC_BASE_OFFSET		0x10000
+
+/*
+ * TZPC Register Value :
+ * R0SIZE: 0x0 : Size of secured ram
+ */
+#define R0SIZE			0x0
+
+/*
+ * TZPC Decode Protection Register Value :
+ * DECPROTXSET: 0xFF : Set Decode region to non-secure
+ */
+#define DECPROTXSET		0xFF
+void tzpc_init(void);
+
 #endif
 
 #endif
diff --git a/board/samsung/dts/exynos5250-smdk5250.dts b/board/samsung/dts/exynos5250-smdk5250.dts
index 8da973b..93375a6 100644
--- a/board/samsung/dts/exynos5250-smdk5250.dts
+++ b/board/samsung/dts/exynos5250-smdk5250.dts
@@ -30,6 +30,10 @@
 		spi2 = "/spi@12d40000";
 		spi3 = "/spi@131a0000";
 		spi4 = "/spi@131b0000";
+		mmc0 = "/mmc@12200000";
+		mmc1 = "/mmc@12210000";
+		mmc2 = "/mmc@12220000";
+		mmc3 = "/mmc@12230000";
 	};
 
 	sromc@12250000 {
@@ -119,4 +123,24 @@
 		samsung,ycbcr-coeff = <0>;
 		samsung,color-depth = <1>;
 	};
+
+	mmc@12200000 {
+		samsung,bus-width = <8>;
+		samsung,timing = <1 3 3>;
+		samsung,removable = <0>;
+	};
+
+	mmc@12210000 {
+		status = "disabled";
+	};
+
+	mmc@12220000 {
+		samsung,bus-width = <4>;
+		samsung,timing = <1 2 3>;
+		samsung,removable = <1>;
+	};
+
+	mmc@12230000 {
+		status = "disabled";
+	};
 };
diff --git a/board/samsung/origen/lowlevel_init.S b/board/samsung/origen/lowlevel_init.S
index 9daa0da..be9d418 100644
--- a/board/samsung/origen/lowlevel_init.S
+++ b/board/samsung/origen/lowlevel_init.S
@@ -87,12 +87,14 @@ lowlevel_init:
 1:
 	/* for UART */
 	bl uart_asm_init
+	bl arch_cpu_init
 	bl tzpc_init
 	pop	{pc}
 
 wakeup_reset:
 	bl system_clock_init
 	bl mem_ctrl_asm_init
+	bl arch_cpu_init
 	bl tzpc_init
 
 exit_wakeup:
@@ -353,45 +355,3 @@ uart_asm_init:
 	nop
 	nop
 
-/* Setting TZPC[TrustZone Protection Controller] */
-tzpc_init:
-	ldr	r0, =TZPC0_BASE
-	mov	r1, #R0SIZE
-	str	r1, [r0]
-	mov	r1, #DECPROTXSET
-	str	r1, [r0, #TZPC_DECPROT0SET_OFFSET]
-	str	r1, [r0, #TZPC_DECPROT1SET_OFFSET]
-	str	r1, [r0, #TZPC_DECPROT2SET_OFFSET]
-	str	r1, [r0, #TZPC_DECPROT3SET_OFFSET]
-
-	ldr	r0, =TZPC1_BASE
-	str	r1, [r0, #TZPC_DECPROT0SET_OFFSET]
-	str	r1, [r0, #TZPC_DECPROT1SET_OFFSET]
-	str	r1, [r0, #TZPC_DECPROT2SET_OFFSET]
-	str	r1, [r0, #TZPC_DECPROT3SET_OFFSET]
-
-	ldr	r0, =TZPC2_BASE
-	str	r1, [r0, #TZPC_DECPROT0SET_OFFSET]
-	str	r1, [r0, #TZPC_DECPROT1SET_OFFSET]
-	str	r1, [r0, #TZPC_DECPROT2SET_OFFSET]
-	str	r1, [r0, #TZPC_DECPROT3SET_OFFSET]
-
-	ldr	r0, =TZPC3_BASE
-	str	r1, [r0, #TZPC_DECPROT0SET_OFFSET]
-	str	r1, [r0, #TZPC_DECPROT1SET_OFFSET]
-	str	r1, [r0, #TZPC_DECPROT2SET_OFFSET]
-	str	r1, [r0, #TZPC_DECPROT3SET_OFFSET]
-
-	ldr	r0, =TZPC4_BASE
-	str	r1, [r0, #TZPC_DECPROT0SET_OFFSET]
-	str	r1, [r0, #TZPC_DECPROT1SET_OFFSET]
-	str	r1, [r0, #TZPC_DECPROT2SET_OFFSET]
-	str	r1, [r0, #TZPC_DECPROT3SET_OFFSET]
-
-	ldr	r0, =TZPC5_BASE
-	str	r1, [r0, #TZPC_DECPROT0SET_OFFSET]
-	str	r1, [r0, #TZPC_DECPROT1SET_OFFSET]
-	str	r1, [r0, #TZPC_DECPROT2SET_OFFSET]
-	str	r1, [r0, #TZPC_DECPROT3SET_OFFSET]
-
-	mov	pc, lr
diff --git a/board/samsung/origen/origen_setup.h b/board/samsung/origen/origen_setup.h
index 930b948..926a4cc 100644
--- a/board/samsung/origen/origen_setup.h
+++ b/board/samsung/origen/origen_setup.h
@@ -121,19 +121,6 @@
 #define UBRDIV_OFFSET		0x28
 #define UFRACVAL_OFFSET		0x2C
 
-/* TZPC : Register Offsets */
-#define TZPC0_BASE		0x10110000
-#define TZPC1_BASE		0x10120000
-#define TZPC2_BASE		0x10130000
-#define TZPC3_BASE		0x10140000
-#define TZPC4_BASE		0x10150000
-#define TZPC5_BASE		0x10160000
-
-#define TZPC_DECPROT0SET_OFFSET	0x804
-#define TZPC_DECPROT1SET_OFFSET	0x810
-#define TZPC_DECPROT2SET_OFFSET	0x81C
-#define TZPC_DECPROT3SET_OFFSET	0x828
-
 /* CLK_SRC_CPU */
 #define MUX_HPM_SEL_MOUTAPLL		0x0
 #define MUX_HPM_SEL_SCLKMPLL		0x1
@@ -617,16 +604,4 @@
  * UBRFRACVAL = ((((800MHz*10/(115200*16) -10))%10)*16/10)
  */
 #define UFRACVAL_VAL		0x4
-
-/*
- * TZPC Register Value :
- * R0SIZE: 0x0 : Size of secured ram
- */
-#define R0SIZE			0x0
-
-/*
- * TZPC Decode Protection Register Value :
- * DECPROTXSET: 0xFF : Set Decode region to non-secure
- */
-#define DECPROTXSET		0xFF
 #endif
diff --git a/board/samsung/smdk5250/Makefile b/board/samsung/smdk5250/Makefile
index 47c6a5a..f2c32ee 100644
--- a/board/samsung/smdk5250/Makefile
+++ b/board/samsung/smdk5250/Makefile
@@ -28,12 +28,15 @@ SOBJS	:= lowlevel_init.o
 
 COBJS	:= clock_init.o
 COBJS	+= dmc_common.o dmc_init_ddr3.o
-COBJS	+= tzpc_init.o
 COBJS	+= smdk5250_spl.o
 
 ifndef CONFIG_SPL_BUILD
+ifdef CONFIG_OF_CONTROL
+COBJS	+= exynos5-dt.o
+else
 COBJS	+= smdk5250.o
 endif
+endif
 
 ifdef CONFIG_SPL_BUILD
 COBJS	+= spl_boot.o
diff --git a/board/samsung/smdk5250/clock_init.c b/board/samsung/smdk5250/clock_init.c
index 5b9e82f..b288e66 100644
--- a/board/samsung/smdk5250/clock_init.c
+++ b/board/samsung/smdk5250/clock_init.c
@@ -28,10 +28,14 @@
 #include <asm/arch/clk.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/spl.h>
+#include <asm/arch/dwmmc.h>
 
 #include "clock_init.h"
 #include "setup.h"
 
+#define FSYS1_MMC0_DIV_MASK	0xff0f
+#define FSYS1_MMC0_DIV_VAL	0x0701
+
 DECLARE_GLOBAL_DATA_PTR;
 
 struct arm_clk_ratios arm_clk_ratios[] = {
@@ -664,3 +668,17 @@ void clock_init_dp_clock(void)
 	/* We run DP at 267 Mhz */
 	setbits_le32(&clk->div_disp1_0, CLK_DIV_DISP1_0_FIMD1);
 }
+
+/*
+ * Set clock divisor value for booting from EMMC.
+ * Set DWMMC channel-0 clk div to operate mmc0 device at 50MHz.
+ */
+void emmc_boot_clk_div_set(void)
+{
+	struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
+	unsigned int div_mmc;
+
+	div_mmc = readl((unsigned int) &clk->div_fsys1) & ~FSYS1_MMC0_DIV_MASK;
+	div_mmc |= FSYS1_MMC0_DIV_VAL;
+	writel(div_mmc, (unsigned int) &clk->div_fsys1);
+}
diff --git a/board/samsung/smdk5250/clock_init.h b/board/samsung/smdk5250/clock_init.h
index f751bcb..20a1d47 100644
--- a/board/samsung/smdk5250/clock_init.h
+++ b/board/samsung/smdk5250/clock_init.h
@@ -146,4 +146,9 @@ struct mem_timings *clock_get_mem_timings(void);
  * Initialize clock for the device
  */
 void system_clock_init(void);
+
+/*
+ * Set clock divisor value for booting from EMMC.
+ */
+void emmc_boot_clk_div_set(void);
 #endif
diff --git a/board/samsung/smdk5250/exynos5-dt.c b/board/samsung/smdk5250/exynos5-dt.c
new file mode 100644
index 0000000..8131505
--- /dev/null
+++ b/board/samsung/smdk5250/exynos5-dt.c
@@ -0,0 +1,423 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <i2c.h>
+#include <netdev.h>
+#include <spi.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/dwmmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/power.h>
+#include <asm/arch/sromc.h>
+#include <power/pmic.h>
+#include <power/max77686_pmic.h>
+#include <tmu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined CONFIG_EXYNOS_TMU
+/*
+ * Boot Time Thermal Analysis for SoC temperature threshold breach
+ */
+static void boot_temp_check(void)
+{
+	int temp;
+
+	switch (tmu_monitor(&temp)) {
+	/* Status TRIPPED ans WARNING means corresponding threshold breach */
+	case TMU_STATUS_TRIPPED:
+		puts("EXYNOS_TMU: TRIPPING! Device power going down ...\n");
+		set_ps_hold_ctrl();
+		hang();
+		break;
+	case TMU_STATUS_WARNING:
+		puts("EXYNOS_TMU: WARNING! Temperature very high\n");
+		break;
+	/*
+	 * TMU_STATUS_INIT means something is wrong with temperature sensing
+	 * and TMU status was changed back from NORMAL to INIT.
+	 */
+	case TMU_STATUS_INIT:
+	default:
+		debug("EXYNOS_TMU: Unknown TMU state\n");
+	}
+}
+#endif
+
+#ifdef CONFIG_USB_EHCI_EXYNOS
+int board_usb_vbus_init(void)
+{
+	struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
+						samsung_get_base_gpio_part1();
+
+	/* Enable VBUS power switch */
+	s5p_gpio_direction_output(&gpio1->x2, 6, 1);
+
+	/* VBUS turn ON time */
+	mdelay(3);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_SOUND_MAX98095
+static void  board_enable_audio_codec(void)
+{
+	struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
+						samsung_get_base_gpio_part1();
+
+	/* Enable MAX98095 Codec */
+	s5p_gpio_direction_output(&gpio1->x1, 7, 1);
+	s5p_gpio_set_pull(&gpio1->x1, 7, GPIO_PULL_NONE);
+}
+#endif
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
+
+#if defined CONFIG_EXYNOS_TMU
+	if (tmu_init(gd->fdt_blob) != TMU_STATUS_NORMAL) {
+		debug("%s: Failed to init TMU\n", __func__);
+		return -1;
+	}
+	boot_temp_check();
+#endif
+
+#ifdef CONFIG_EXYNOS_SPI
+	spi_init();
+#endif
+#ifdef CONFIG_USB_EHCI_EXYNOS
+	board_usb_vbus_init();
+#endif
+#ifdef CONFIG_SOUND_MAX98095
+	board_enable_audio_codec();
+#endif
+	return 0;
+}
+
+int dram_init(void)
+{
+	int i;
+	u32 addr;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
+		gd->ram_size += get_ram_size((long *)addr, SDRAM_BANK_SIZE);
+	}
+	return 0;
+}
+
+#if defined(CONFIG_POWER)
+static int pmic_reg_update(struct pmic *p, int reg, uint regval)
+{
+	u32 val;
+	int ret = 0;
+
+	ret = pmic_reg_read(p, reg, &val);
+	if (ret) {
+		debug("%s: PMIC %d register read failed\n", __func__, reg);
+		return -1;
+	}
+	val |= regval;
+	ret = pmic_reg_write(p, reg, val);
+	if (ret) {
+		debug("%s: PMIC %d register write failed\n", __func__, reg);
+		return -1;
+	}
+	return 0;
+}
+
+int power_init_board(void)
+{
+	struct pmic *p;
+
+	set_ps_hold_ctrl();
+
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+	if (pmic_init(I2C_PMIC))
+		return -1;
+
+	p = pmic_get("MAX77686_PMIC");
+	if (!p)
+		return -ENODEV;
+
+	if (pmic_probe(p))
+		return -1;
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN))
+		return -1;
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT,
+			    MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V))
+		return -1;
+
+	/* VDD_MIF */
+	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
+			   MAX77686_BUCK1OUT_1V)) {
+		debug("%s: PMIC %d register write failed\n", __func__,
+		      MAX77686_REG_PMIC_BUCK1OUT);
+		return -1;
+	}
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL,
+			    MAX77686_BUCK1CTRL_EN))
+		return -1;
+
+	/* VDD_ARM */
+	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1,
+			   MAX77686_BUCK2DVS1_1_3V)) {
+		debug("%s: PMIC %d register write failed\n", __func__,
+		      MAX77686_REG_PMIC_BUCK2DVS1);
+		return -1;
+	}
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1,
+			    MAX77686_BUCK2CTRL_ON))
+		return -1;
+
+	/* VDD_INT */
+	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1,
+			   MAX77686_BUCK3DVS1_1_0125V)) {
+		debug("%s: PMIC %d register write failed\n", __func__,
+		      MAX77686_REG_PMIC_BUCK3DVS1);
+		return -1;
+	}
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL,
+			    MAX77686_BUCK3CTRL_ON))
+		return -1;
+
+	/* VDD_G3D */
+	if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1,
+			   MAX77686_BUCK4DVS1_1_2V)) {
+		debug("%s: PMIC %d register write failed\n", __func__,
+		      MAX77686_REG_PMIC_BUCK4DVS1);
+		return -1;
+	}
+
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1,
+			    MAX77686_BUCK3CTRL_ON))
+		return -1;
+
+	/* VDD_LDO2 */
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1,
+			    MAX77686_LD02CTRL1_1_5V | EN_LDO))
+		return -1;
+
+	/* VDD_LDO3 */
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1,
+			    MAX77686_LD03CTRL1_1_8V | EN_LDO))
+		return -1;
+
+	/* VDD_LDO5 */
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1,
+			    MAX77686_LD05CTRL1_1_8V | EN_LDO))
+		return -1;
+
+	/* VDD_LDO10 */
+	if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1,
+			    MAX77686_LD10CTRL1_1_8V | EN_LDO))
+		return -1;
+
+	return 0;
+}
+#endif
+
+void dram_init_banksize(void)
+{
+	int i;
+	u32 addr, size;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
+		size = get_ram_size((long *)addr, SDRAM_BANK_SIZE);
+
+		gd->bd->bi_dram[i].start = addr;
+		gd->bd->bi_dram[i].size = size;
+	}
+}
+
+static int decode_sromc(const void *blob, struct fdt_sromc *config)
+{
+	int err;
+	int node;
+
+	node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SROMC);
+	if (node < 0) {
+		debug("Could not find SROMC node\n");
+		return node;
+	}
+
+	config->bank = fdtdec_get_int(blob, node, "bank", 0);
+	config->width = fdtdec_get_int(blob, node, "width", 2);
+
+	err = fdtdec_get_int_array(blob, node, "srom-timing", config->timing,
+			FDT_SROM_TIMING_COUNT);
+	if (err < 0) {
+		debug("Could not decode SROMC configuration Error: %s\n",
+		      fdt_strerror(err));
+		return -FDT_ERR_NOTFOUND;
+	}
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_SMC911X
+	u32 smc_bw_conf, smc_bc_conf;
+	struct fdt_sromc config;
+	fdt_addr_t base_addr;
+	int node;
+
+	node = decode_sromc(gd->fdt_blob, &config);
+	if (node < 0) {
+		debug("%s: Could not find sromc configuration\n", __func__);
+		return 0;
+	}
+	node = fdtdec_next_compatible(gd->fdt_blob, node, COMPAT_SMSC_LAN9215);
+	if (node < 0) {
+		debug("%s: Could not find lan9215 configuration\n", __func__);
+		return 0;
+	}
+
+	/* We now have a node, so any problems from now on are errors */
+	base_addr = fdtdec_get_addr(gd->fdt_blob, node, "reg");
+	if (base_addr == FDT_ADDR_T_NONE) {
+		debug("%s: Could not find lan9215 address\n", __func__);
+		return -1;
+	}
+
+	/* Ethernet needs data bus width of 16 bits */
+	if (config.width != 2) {
+		debug("%s: Unsupported bus width %d\n", __func__,
+		      config.width);
+		return -1;
+	}
+	smc_bw_conf = SROMC_DATA16_WIDTH(config.bank)
+			| SROMC_BYTE_ENABLE(config.bank);
+
+	smc_bc_conf = SROMC_BC_TACS(config.timing[FDT_SROM_TACS])   |
+			SROMC_BC_TCOS(config.timing[FDT_SROM_TCOS]) |
+			SROMC_BC_TACC(config.timing[FDT_SROM_TACC]) |
+			SROMC_BC_TCOH(config.timing[FDT_SROM_TCOH]) |
+			SROMC_BC_TAH(config.timing[FDT_SROM_TAH])   |
+			SROMC_BC_TACP(config.timing[FDT_SROM_TACP]) |
+			SROMC_BC_PMC(config.timing[FDT_SROM_PMC]);
+
+	/* Select and configure the SROMC bank */
+	exynos_pinmux_config(PERIPH_ID_SROMC, config.bank);
+	s5p_config_sromc(config.bank, smc_bw_conf, smc_bc_conf);
+	return smc911x_initialize(0, base_addr);
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	const char *board_name;
+
+	board_name = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
+	if (board_name == NULL)
+		printf("\nUnknown Board\n");
+	else
+		printf("\nBoard: %s\n", board_name);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+	int ret;
+	/* dwmmc initializattion for available channels */
+	ret = exynos_dwmmc_init(gd->fdt_blob);
+	if (ret)
+		debug("dwmmc init failed\n");
+
+	return ret;
+}
+#endif
+
+static int board_uart_init(void)
+{
+	int err, uart_id, ret = 0;
+
+	for (uart_id = PERIPH_ID_UART0; uart_id <= PERIPH_ID_UART3; uart_id++) {
+		err = exynos_pinmux_config(uart_id, PINMUX_FLAG_NONE);
+		if (err) {
+			debug("UART%d not configured\n",
+			      (uart_id - PERIPH_ID_UART0));
+			ret |= err;
+		}
+	}
+	return ret;
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+	int err;
+	err = board_uart_init();
+	if (err) {
+		debug("UART init failed\n");
+		return err;
+	}
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
+	board_i2c_init(gd->fdt_blob);
+#endif
+	return err;
+}
+#endif
+
+#ifdef CONFIG_LCD
+void exynos_cfg_lcd_gpio(void)
+{
+	struct exynos5_gpio_part1 *gpio1 =
+		(struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
+
+	/* For Backlight */
+	s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
+	s5p_gpio_set_value(&gpio1->b2, 0, 1);
+
+	/* LCD power on */
+	s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
+	s5p_gpio_set_value(&gpio1->x1, 5, 1);
+
+	/* Set Hotplug detect for DP */
+	s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
+}
+
+void exynos_set_dp_phy(unsigned int onoff)
+{
+	set_dp_phy_ctrl(onoff);
+}
+#endif
diff --git a/board/samsung/smdk5250/lowlevel_init.S b/board/samsung/smdk5250/lowlevel_init.S
index bc6cb6f..edc565e 100644
--- a/board/samsung/smdk5250/lowlevel_init.S
+++ b/board/samsung/smdk5250/lowlevel_init.S
@@ -75,12 +75,14 @@ lowlevel_init:
 	bl	mem_ctrl_init
 
 1:
+	bl	arch_cpu_init
 	bl	tzpc_init
 	ldmia	r13!, {ip,pc}
 
 wakeup_reset:
 	bl	system_clock_init
 	bl	mem_ctrl_init
+	bl	arch_cpu_init
 	bl	tzpc_init
 
 exit_wakeup:
diff --git a/board/samsung/smdk5250/setup.h b/board/samsung/smdk5250/setup.h
index 34d8bc31..eb91d13 100644
--- a/board/samsung/smdk5250/setup.h
+++ b/board/samsung/smdk5250/setup.h
@@ -28,18 +28,6 @@
 #include <config.h>
 #include <asm/arch/dmc.h>
 
-/* TZPC : Register Offsets */
-#define TZPC0_BASE		0x10100000
-#define TZPC1_BASE		0x10110000
-#define TZPC2_BASE		0x10120000
-#define TZPC3_BASE		0x10130000
-#define TZPC4_BASE		0x10140000
-#define TZPC5_BASE		0x10150000
-#define TZPC6_BASE		0x10160000
-#define TZPC7_BASE		0x10170000
-#define TZPC8_BASE		0x10180000
-#define TZPC9_BASE		0x10190000
-
 /* APLL_CON1	*/
 #define APLL_CON1_VAL	(0x00203800)
 
@@ -458,18 +446,6 @@
 /* CLK_GATE_IP_DISP1 */
 #define CLK_GATE_DP1_ALLOW	(1 << 4)
 
-/*
- * TZPC Register Value :
- * R0SIZE: 0x0 : Size of secured ram
- */
-#define R0SIZE			0x0
-
-/*
- * TZPC Decode Protection Register Value :
- * DECPROTXSET: 0xFF : Set Decode region to non-secure
- */
-#define DECPROTXSET		0xFF
-
 #define DDR3PHY_CTRL_PHY_RESET	(1 << 0)
 #define DDR3PHY_CTRL_PHY_RESET_OFF	(0 << 0)
 
@@ -590,5 +566,4 @@ void update_reset_dll(struct exynos5_dmc *, enum ddr_mode);
 void sdelay(unsigned long);
 void mem_ctrl_init(void);
 void system_clock_init(void);
-void tzpc_init(void);
 #endif
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
index 8b09e1d..276fd41 100644
--- a/board/samsung/smdk5250/smdk5250.c
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -29,6 +29,7 @@
 #include <netdev.h>
 #include <spi.h>
 #include <asm/arch/cpu.h>
+#include <asm/arch/dwmmc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/pinmux.h>
@@ -37,39 +38,9 @@
 #include <asm/arch/dp_info.h>
 #include <power/pmic.h>
 #include <power/max77686_pmic.h>
-#include <tmu.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined CONFIG_EXYNOS_TMU
-/*
- * Boot Time Thermal Analysis for SoC temperature threshold breach
- */
-static void boot_temp_check(void)
-{
-	int temp;
-
-	switch (tmu_monitor(&temp)) {
-	/* Status TRIPPED ans WARNING means corresponding threshold breach */
-	case TMU_STATUS_TRIPPED:
-		puts("EXYNOS_TMU: TRIPPING! Device power going down ...\n");
-		set_ps_hold_ctrl();
-		hang();
-		break;
-	case TMU_STATUS_WARNING:
-		puts("EXYNOS_TMU: WARNING! Temperature very high\n");
-		break;
-	/*
-	 * TMU_STATUS_INIT means something is wrong with temperature sensing
-	 * and TMU status was changed back from NORMAL to INIT.
-	 */
-	case TMU_STATUS_INIT:
-	default:
-		debug("EXYNOS_TMU: Unknown TMU state\n");
-	}
-}
-#endif
-
 #ifdef CONFIG_USB_EHCI_EXYNOS
 int board_usb_vbus_init(void)
 {
@@ -102,14 +73,6 @@ int board_init(void)
 {
 	gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
 
-#if defined CONFIG_EXYNOS_TMU
-	if (tmu_init(gd->fdt_blob) != TMU_STATUS_NORMAL) {
-		debug("%s: Failed to init TMU\n", __func__);
-		return -1;
-	}
-	boot_temp_check();
-#endif
-
 #ifdef CONFIG_EXYNOS_SPI
 	spi_init();
 #endif
@@ -124,14 +87,13 @@ int board_init(void)
 
 int dram_init(void)
 {
-	gd->ram_size	= get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
-			+ get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE)
-			+ get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE)
-			+ get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE)
-			+ get_ram_size((long *)PHYS_SDRAM_5, PHYS_SDRAM_7_SIZE)
-			+ get_ram_size((long *)PHYS_SDRAM_6, PHYS_SDRAM_7_SIZE)
-			+ get_ram_size((long *)PHYS_SDRAM_7, PHYS_SDRAM_7_SIZE)
-			+ get_ram_size((long *)PHYS_SDRAM_8, PHYS_SDRAM_8_SIZE);
+	int i;
+	u32 addr;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
+		gd->ram_size += get_ram_size((long *)addr, SDRAM_BANK_SIZE);
+	}
 	return 0;
 }
 
@@ -254,57 +216,15 @@ int power_init_board(void)
 
 void dram_init_banksize(void)
 {
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
-							PHYS_SDRAM_1_SIZE);
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-	gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2,
-							PHYS_SDRAM_2_SIZE);
-	gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
-	gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3,
-							PHYS_SDRAM_3_SIZE);
-	gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
-	gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4,
-							PHYS_SDRAM_4_SIZE);
-	gd->bd->bi_dram[4].start = PHYS_SDRAM_5;
-	gd->bd->bi_dram[4].size = get_ram_size((long *)PHYS_SDRAM_5,
-							PHYS_SDRAM_5_SIZE);
-	gd->bd->bi_dram[5].start = PHYS_SDRAM_6;
-	gd->bd->bi_dram[5].size = get_ram_size((long *)PHYS_SDRAM_6,
-							PHYS_SDRAM_6_SIZE);
-	gd->bd->bi_dram[6].start = PHYS_SDRAM_7;
-	gd->bd->bi_dram[6].size = get_ram_size((long *)PHYS_SDRAM_7,
-							PHYS_SDRAM_7_SIZE);
-	gd->bd->bi_dram[7].start = PHYS_SDRAM_8;
-	gd->bd->bi_dram[7].size = get_ram_size((long *)PHYS_SDRAM_8,
-							PHYS_SDRAM_8_SIZE);
-}
-
-#ifdef CONFIG_OF_CONTROL
-static int decode_sromc(const void *blob, struct fdt_sromc *config)
-{
-	int err;
-	int node;
-
-	node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SROMC);
-	if (node < 0) {
-		debug("Could not find SROMC node\n");
-		return node;
-	}
-
-	config->bank = fdtdec_get_int(blob, node, "bank", 0);
-	config->width = fdtdec_get_int(blob, node, "width", 2);
-
-	err = fdtdec_get_int_array(blob, node, "srom-timing", config->timing,
-			FDT_SROM_TIMING_COUNT);
-	if (err < 0) {
-		debug("Could not decode SROMC configuration\n");
-		return -FDT_ERR_NOTFOUND;
+	int i;
+	u32 addr, size;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		addr = CONFIG_SYS_SDRAM_BASE + (i * SDRAM_BANK_SIZE);
+		size = get_ram_size((long *)addr, SDRAM_BANK_SIZE);
+		gd->bd->bi_dram[i].start = addr;
+		gd->bd->bi_dram[i].size = size;
 	}
-
-	return 0;
 }
-#endif
 
 int board_eth_init(bd_t *bis)
 {
@@ -313,27 +233,6 @@ int board_eth_init(bd_t *bis)
 	struct fdt_sromc config;
 	fdt_addr_t base_addr;
 
-#ifdef CONFIG_OF_CONTROL
-	int node;
-
-	node = decode_sromc(gd->fdt_blob, &config);
-	if (node < 0) {
-		debug("%s: Could not find sromc configuration\n", __func__);
-		return 0;
-	}
-	node = fdtdec_next_compatible(gd->fdt_blob, node, COMPAT_SMSC_LAN9215);
-	if (node < 0) {
-		debug("%s: Could not find lan9215 configuration\n", __func__);
-		return 0;
-	}
-
-	/* We now have a node, so any problems from now on are errors */
-	base_addr = fdtdec_get_addr(gd->fdt_blob, node, "reg");
-	if (base_addr == FDT_ADDR_T_NONE) {
-		debug("%s: Could not find lan9215 address\n", __func__);
-		return -1;
-	}
-#else
 	/* Non-FDT configuration - bank number and timing parameters*/
 	config.bank = CONFIG_ENV_SROM_BANK;
 	config.width = 2;
@@ -346,7 +245,6 @@ int board_eth_init(bd_t *bis)
 	config.timing[FDT_SROM_TACP] = 0x09;
 	config.timing[FDT_SROM_PMC] = 0x01;
 	base_addr = CONFIG_SMC911X_BASE;
-#endif
 
 	/* Ethernet needs data bus width of 16 bits */
 	if (config.width != 2) {
@@ -376,17 +274,7 @@ int board_eth_init(bd_t *bis)
 #ifdef CONFIG_DISPLAY_BOARDINFO
 int checkboard(void)
 {
-#ifdef CONFIG_OF_CONTROL
-	const char *board_name;
-
-	board_name = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
-	if (board_name == NULL)
-		printf("\nUnknown Board\n");
-	else
-		printf("\nBoard: %s\n", board_name);
-#else
 	printf("\nBoard: SMDK5250\n");
-#endif
 	return 0;
 }
 #endif
@@ -394,48 +282,54 @@ int checkboard(void)
 #ifdef CONFIG_GENERIC_MMC
 int board_mmc_init(bd_t *bis)
 {
-	int err;
+	int err, ret = 0, index, bus_width;
+	u32 base;
 
 	err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
-	if (err) {
+	if (err)
 		debug("SDMMC0 not configured\n");
-		return err;
-	}
-
-	err = s5p_mmc_init(0, 8);
-	return err;
+	ret |= err;
+
+	/*EMMC: dwmmc Channel-0 with 8 bit bus width */
+	index = 0;
+	base =  samsung_get_base_mmc() + (0x10000 * index);
+	bus_width = 8;
+	err = exynos_dwmci_add_port(index, base, bus_width, (u32)NULL);
+	if (err)
+		debug("dwmmc Channel-0 init failed\n");
+	ret |= err;
+
+	err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
+	if (err)
+		debug("SDMMC2 not configured\n");
+	ret |= err;
+
+	/*SD: dwmmc Channel-2 with 4 bit bus width */
+	index = 2;
+	base = samsung_get_base_mmc() + (0x10000 * index);
+	bus_width = 4;
+	err = exynos_dwmci_add_port(index, base, bus_width, (u32)NULL);
+	if (err)
+		debug("dwmmc Channel-2 init failed\n");
+	ret |= err;
+
+	return ret;
 }
 #endif
 
 static int board_uart_init(void)
 {
-	int err;
-
-	err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
-	if (err) {
-		debug("UART0 not configured\n");
-		return err;
+	int err, uart_id, ret = 0;
+
+	for (uart_id = PERIPH_ID_UART0; uart_id <= PERIPH_ID_UART3; uart_id++) {
+		err = exynos_pinmux_config(uart_id, PINMUX_FLAG_NONE);
+		if (err) {
+			debug("UART%d not configured\n",
+			      (uart_id - PERIPH_ID_UART0));
+			ret |= err;
+		}
 	}
-
-	err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
-	if (err) {
-		debug("UART1 not configured\n");
-		return err;
-	}
-
-	err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
-	if (err) {
-		debug("UART2 not configured\n");
-		return err;
-	}
-
-	err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
-	if (err) {
-		debug("UART3 not configured\n");
-		return err;
-	}
-
-	return 0;
+	return ret;
 }
 
 #ifdef CONFIG_BOARD_EARLY_INIT_F
@@ -448,7 +342,7 @@ int board_early_init_f(void)
 		return err;
 	}
 #ifdef CONFIG_SYS_I2C_INIT_BOARD
-	board_i2c_init(gd->fdt_blob);
+	board_i2c_init(NULL);
 #endif
 	return err;
 }
@@ -477,7 +371,6 @@ void exynos_set_dp_phy(unsigned int onoff)
 	set_dp_phy_ctrl(onoff);
 }
 
-#ifndef CONFIG_OF_CONTROL
 vidinfo_t panel_info = {
 	.vl_freq	= 60,
 	.vl_col		= 2560,
@@ -543,13 +436,9 @@ static struct exynos_dp_platform_data dp_platform_data = {
 	.edp_dev_info	= &edp_info,
 };
 
-#endif
 void init_panel_info(vidinfo_t *vid)
 {
-#ifndef CONFIG_OF_CONTROL
-	vid->rgb_mode   = MODE_RGB_P,
-
+	vid->rgb_mode   = MODE_RGB_P;
 	exynos_set_dp_platform_data(&dp_platform_data);
-#endif
 }
 #endif
diff --git a/board/samsung/smdk5250/spl_boot.c b/board/samsung/smdk5250/spl_boot.c
index c0bcf46..98f2286 100644
--- a/board/samsung/smdk5250/spl_boot.c
+++ b/board/samsung/smdk5250/spl_boot.c
@@ -23,16 +23,44 @@
 #include<common.h>
 #include<config.h>
 
+#include <asm/arch-exynos/dmc.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/clk.h>
+
+#include "clock_init.h"
+
+/* Index into irom ptr table */
+enum index {
+	MMC_INDEX,
+	EMMC44_INDEX,
+	EMMC44_END_INDEX,
+	SPI_INDEX,
+	USB_INDEX,
+};
+
+/* IROM Function Pointers Table */
+u32 irom_ptr_table[] = {
+	[MMC_INDEX] = 0x02020030,	/* iROM Function Pointer-SDMMC boot */
+	[EMMC44_INDEX] = 0x02020044,	/* iROM Function Pointer-EMMC4.4 boot*/
+	[EMMC44_END_INDEX] = 0x02020048,/* iROM Function Pointer
+						-EMMC4.4 end boot operation */
+	[SPI_INDEX] = 0x02020058,	/* iROM Function Pointer-SPI boot */
+	[USB_INDEX] = 0x02020070,	/* iROM Function Pointer-USB boot*/
+	};
+
 enum boot_mode {
 	BOOT_MODE_MMC = 4,
 	BOOT_MODE_SERIAL = 20,
+	BOOT_MODE_EMMC = 8,     /* EMMC4.4 */
 	/* Boot based on Operating Mode pin settings */
 	BOOT_MODE_OM = 32,
 	BOOT_MODE_USB,	/* Boot using USB download */
 };
 
-	typedef u32 (*spi_copy_func_t)(u32 offset, u32 nblock, u32 dst);
-	typedef u32 (*usb_copy_func_t)(void);
+void *get_irom_func(int index)
+{
+	return (void *)*(u32 *)irom_ptr_table[index];
+}
 
 /*
  * Set/clear program flow prediction and return the previous state.
@@ -55,13 +83,15 @@ static int config_branch_prediction(int set_cr_z)
 */
 void copy_uboot_to_ram(void)
 {
-	spi_copy_func_t spi_copy;
-	usb_copy_func_t usb_copy;
-
 	int is_cr_z_set;
 	unsigned int sec_boot_check;
 	enum boot_mode bootmode = BOOT_MODE_OM;
-	u32 (*copy_bl2)(u32, u32, u32);
+
+	u32 (*spi_copy)(u32 offset, u32 nblock, u32 dst);
+	u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst);
+	u32 (*copy_bl2_from_emmc)(u32 nblock, u32 dst);
+	void (*end_bootop_from_emmc)(void);
+	u32 (*usb_copy)(void);
 
 	/* Read iRAM location to check for secondary USB boot mode */
 	sec_boot_check = readl(EXYNOS_IRAM_SECONDARY_BASE);
@@ -73,14 +103,24 @@ void copy_uboot_to_ram(void)
 
 	switch (bootmode) {
 	case BOOT_MODE_SERIAL:
-		spi_copy = *(spi_copy_func_t *)EXYNOS_COPY_SPI_FNPTR_ADDR;
+		spi_copy = get_irom_func(SPI_INDEX);
 		spi_copy(SPI_FLASH_UBOOT_POS, CONFIG_BL2_SIZE,
-						CONFIG_SYS_TEXT_BASE);
+			 CONFIG_SYS_TEXT_BASE);
 		break;
 	case BOOT_MODE_MMC:
-		copy_bl2 = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR;
+		copy_bl2 = get_irom_func(MMC_INDEX);
 		copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT,
-						CONFIG_SYS_TEXT_BASE);
+			 CONFIG_SYS_TEXT_BASE);
+		break;
+	case BOOT_MODE_EMMC:
+		/* Set the FSYS1 clock divisor value for EMMC boot */
+		emmc_boot_clk_div_set();
+
+		copy_bl2_from_emmc = get_irom_func(EMMC44_INDEX);
+		end_bootop_from_emmc = get_irom_func(EMMC44_END_INDEX);
+
+		copy_bl2_from_emmc(BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
+		end_bootop_from_emmc();
 		break;
 	case BOOT_MODE_USB:
 		/*
@@ -88,8 +128,7 @@ void copy_uboot_to_ram(void)
 		 * before copy from USB device to RAM
 		 */
 		is_cr_z_set = config_branch_prediction(0);
-		usb_copy = *(usb_copy_func_t *)
-				EXYNOS_COPY_USB_FNPTR_ADDR;
+		usb_copy = get_irom_func(USB_INDEX);
 		usb_copy();
 		config_branch_prediction(is_cr_z_set);
 		break;
@@ -117,5 +156,4 @@ void board_init_r(gd_t *id, ulong dest_addr)
 	while (1)
 		;
 }
-
 void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {}
diff --git a/board/samsung/smdkv310/lowlevel_init.S b/board/samsung/smdkv310/lowlevel_init.S
index 7a1ea98..31e0e2e 100644
--- a/board/samsung/smdkv310/lowlevel_init.S
+++ b/board/samsung/smdkv310/lowlevel_init.S
@@ -85,12 +85,14 @@ lowlevel_init:
 1:
 	/* for UART */
 	bl uart_asm_init
+	bl arch_cpu_init
 	bl tzpc_init
 	pop	{pc}
 
 wakeup_reset:
 	bl system_clock_init
 	bl mem_ctrl_asm_init
+	bl arch_cpu_init
 	bl tzpc_init
 
 exit_wakeup:
@@ -410,61 +412,3 @@ uart_asm_init:
 	nop
 	nop
 	nop
-
-/* Setting TZPC[TrustZone Protection Controller] */
-tzpc_init:
-	ldr	r0, =0x10110000
-	mov	r1, #0x0
-	str	r1, [r0]
-	mov	r1, #0xff
-	str	r1, [r0, #0x0804]
-	str	r1, [r0, #0x0810]
-	str	r1, [r0, #0x081C]
-	str	r1, [r0, #0x0828]
-
-	ldr	r0, =0x10120000
-	mov	r1, #0x0
-	str	r1, [r0]
-	mov	r1, #0xff
-	str	r1, [r0, #0x0804]
-	str	r1, [r0, #0x0810]
-	str	r1, [r0, #0x081C]
-	str	r1, [r0, #0x0828]
-
-	ldr	r0, =0x10130000
-	mov	r1, #0x0
-	str	r1, [r0]
-	mov	r1, #0xff
-	str	r1, [r0, #0x0804]
-	str	r1, [r0, #0x0810]
-	str	r1, [r0, #0x081C]
-	str	r1, [r0, #0x0828]
-
-	ldr	r0, =0x10140000
-	mov	r1, #0x0
-	str	r1, [r0]
-	mov	r1, #0xff
-	str	r1, [r0, #0x0804]
-	str	r1, [r0, #0x0810]
-	str	r1, [r0, #0x081C]
-	str	r1, [r0, #0x0828]
-
-	ldr	r0, =0x10150000
-	mov	r1, #0x0
-	str	r1, [r0]
-	mov	r1, #0xff
-	str	r1, [r0, #0x0804]
-	str	r1, [r0, #0x0810]
-	str	r1, [r0, #0x081C]
-	str	r1, [r0, #0x0828]
-
-	ldr	r0, =0x10160000
-	mov	r1, #0x0
-	str	r1, [r0]
-	mov	r1, #0xff
-	str	r1, [r0, #0x0804]
-	str	r1, [r0, #0x0810]
-	str	r1, [r0, #0x081C]
-	str	r1, [r0, #0x0828]
-
-	mov	pc, lr
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 7d82469..5f1ed43 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -147,6 +147,36 @@ U_BOOT_CMD(
 	"- display info of the current MMC device"
 );
 
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+static int boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access)
+{
+	int err;
+	err = mmc_boot_part_access(mmc, ack, part_num, access);
+
+	if ((err == 0) && (access != 0)) {
+		printf("\t\t\t!!!Notice!!!\n");
+
+		printf("!You must close EMMC boot Partition");
+		printf("after all images are written\n");
+
+		printf("!EMMC boot partition has continuity");
+		printf("at image writing time.\n");
+
+		printf("!So, do not close the boot partition");
+		printf("before all images are written.\n");
+		return 0;
+	} else if ((err == 0) && (access == 0))
+		return 0;
+	else if ((err != 0) && (access != 0)) {
+		printf("EMMC boot partition-%d OPEN Failed.\n", part_num);
+		return 1;
+	} else {
+		printf("EMMC boot partition-%d CLOSE Failed.\n", part_num);
+		return 1;
+	}
+}
+#endif
+
 static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	enum mmc_state state;
@@ -258,8 +288,74 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 				curr_device, mmc->part_num);
 
 		return 0;
-	}
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+	} else if ((strcmp(argv[1], "open") == 0) ||
+			(strcmp(argv[1], "close") == 0)) {
+		int dev;
+		struct mmc *mmc;
+		u8 part_num, access = 0;
+
+		if (argc == 4) {
+			dev = simple_strtoul(argv[2], NULL, 10);
+			part_num = simple_strtoul(argv[3], NULL, 10);
+		} else {
+			return CMD_RET_USAGE;
+		}
+
+		mmc = find_mmc_device(dev);
+		if (!mmc) {
+			printf("no mmc device at slot %x\n", dev);
+			return 1;
+		}
 
+		if (IS_SD(mmc)) {
+			printf("SD device cannot be opened/closed\n");
+			return 1;
+		}
+
+		if ((part_num <= 0) || (part_num > MMC_NUM_BOOT_PARTITION)) {
+			printf("Invalid boot partition number:\n");
+			printf("Boot partition number cannot be <= 0\n");
+			printf("EMMC44 supports only 2 boot partitions\n");
+			return 1;
+		}
+
+		if (strcmp(argv[1], "open") == 0)
+			access = part_num; /* enable R/W access to boot part*/
+		else
+			access = 0; /* No access to boot partition */
+
+		/* acknowledge to be sent during boot operation */
+		return boot_part_access(mmc, 1, part_num, access);
+
+	} else if (strcmp(argv[1], "bootpart") == 0) {
+		int dev;
+		dev = simple_strtoul(argv[2], NULL, 10);
+
+		u32 bootsize = simple_strtoul(argv[3], NULL, 10);
+		u32 rpmbsize = simple_strtoul(argv[4], NULL, 10);
+		struct mmc *mmc = find_mmc_device(dev);
+		if (!mmc) {
+			printf("no mmc device at slot %x\n", dev);
+			return 1;
+		}
+
+		if (IS_SD(mmc)) {
+			printf("It is not a EMMC device\n");
+			return 1;
+		}
+
+		if (0 == mmc_boot_partition_size_change(mmc,
+							bootsize, rpmbsize)) {
+			printf("EMMC boot partition Size %d MB\n", bootsize);
+			printf("EMMC RPMB partition Size %d MB\n", rpmbsize);
+			return 0;
+		} else {
+			printf("EMMC boot partition Size change Failed.\n");
+			return 1;
+		}
+#endif /* CONFIG_SUPPORT_EMMC_BOOT */
+	}
 	state = MMC_INVALID;
 	if (argc == 5 && strcmp(argv[1], "read") == 0)
 		state = MMC_READ;
@@ -334,5 +430,14 @@ U_BOOT_CMD(
 	"mmc rescan\n"
 	"mmc part - lists available partition on current mmc device\n"
 	"mmc dev [dev] [part] - show or set current mmc device [partition]\n"
-	"mmc list - lists available devices");
+	"mmc list - lists available devices\n"
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+	"mmc open <dev> <boot_partition>\n"
+	" - Enable boot_part for booting and enable R/W access of boot_part\n"
+	"mmc close <dev> <boot_partition>\n"
+	" - Enable boot_part for booting and disable access to boot_part\n"
+	"mmc bootpart <device num> <boot part size MB> <RPMB part size MB>\n"
+	" - change sizes of boot and RPMB partions of specified device\n"
 #endif
+	);
+#endif /* !CONFIG_GENERIC_MMC */
diff --git a/doc/device-tree-bindings/exynos/dwmmc.txt b/doc/device-tree-bindings/exynos/dwmmc.txt
new file mode 100644
index 0000000..566da3b
--- /dev/null
+++ b/doc/device-tree-bindings/exynos/dwmmc.txt
@@ -0,0 +1,54 @@
+* Exynos 5250 DWC_mobile_storage
+
+The Exynos 5250 provides DWC_mobile_storage interface which supports
+. Embedded Multimedia Cards (EMMC-version 4.5)
+. Secure Digital memory (SD mem-version 2.0)
+. Secure Digital I/O (SDIO-version 3.0)
+. Consumer Electronics Advanced Transport Architecture (CE-ATA-version 1.1)
+
+The Exynos 5250 DWC_mobile_storage provides four channels.
+SOC specific and Board specific properties are channel specific.
+
+Required SoC Specific Properties:
+
+- compatible: should be
+	- samsung,exynos5250-dwmmc: for exynos5250 platforms
+
+- reg: physical base address of the controller and length of memory mapped
+	region.
+
+- interrupts: The interrupt number to the cpu.
+
+Required Board Specific Properties:
+
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+- samsung,bus-width: The width of the bus used to interface the devices
+	supported by DWC_mobile_storage (SD-MMC/EMMC/SDIO).
+	. Typically the bus width is 4 or 8.
+- samsung,timing: The timing values to be written into the
+	Drv/sample clock selection register of corresponding channel.
+	. It is comprised of 3 values corresponding to the 3 fileds
+	  'SelClk_sample', 'SelClk_drv' and 'DIVRATIO' of CLKSEL register.
+	. SelClk_sample: Select sample clock among 8 shifted clocks.
+	. SelClk_drv: Select drv clock among 8 shifted clocks.
+	. DIVRATIO: Clock Divide ratio select.
+	. The above 3 values are used by the clock phase shifter.
+
+Example:
+
+mmc@12200000 {
+	samsung,bus-width = <8>;
+	samsung,timing = <1 3 3>;
+	samsung,removable = <1>;
+}
+In the above example,
+	. The bus width is 8
+	. Timing is comprised of 3 values as explained below
+		1 - SelClk_sample
+		3 - SelClk_drv
+		3 - DIVRATIO
+	. The 'removable' flag indicates whether the the particilar device
+	  cannot be removed (always present) or it is a removable device.
+		1 - Indicates that the device is removable.
+		0 - Indicates that the device cannot be removed.
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
index 4070d4e..5da20ed 100644
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@@ -129,13 +129,13 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
 	unsigned int timeout = 100000;
 	u32 retry = 10000;
 	u32 mask, ctrl;
+	ulong start = get_timer(0);
 
 	while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
-		if (timeout == 0) {
+		if (get_timer(start) > timeout) {
 			printf("Timeout on data busy\n");
 			return TIMEOUT;
 		}
-		timeout--;
 	}
 
 	dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL);
@@ -143,7 +143,6 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
 	if (data)
 		dwmci_prepare_data(host, data);
 
-
 	dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg);
 
 	if (data)
@@ -231,9 +230,8 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)
 	int timeout = 10000;
 	unsigned long sclk;
 
-	if (freq == host->clock)
+	if ((freq == host->clock) || (freq == 0))
 		return 0;
-
 	/*
 	 * If host->mmc_clk didn't define,
 	 * then assume that host->bus_hz is source clock value.
@@ -314,7 +312,7 @@ static void dwmci_set_ios(struct mmc *mmc)
 static int dwmci_init(struct mmc *mmc)
 {
 	struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
-	u32 fifo_size, fifoth_val;
+	u32 fifo_size;
 
 	dwmci_writel(host, DWMCI_PWREN, 1);
 
@@ -323,6 +321,9 @@ static int dwmci_init(struct mmc *mmc)
 		return -1;
 	}
 
+	/* Enumerate at 400KHz */
+	dwmci_setup_bus(host, mmc->f_min);
+
 	dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF);
 	dwmci_writel(host, DWMCI_INTMASK, 0);
 
@@ -331,13 +332,13 @@ static int dwmci_init(struct mmc *mmc)
 	dwmci_writel(host, DWMCI_IDINTEN, 0);
 	dwmci_writel(host, DWMCI_BMOD, 1);
 
-	fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
-	if (host->fifoth_val)
-		fifoth_val = host->fifoth_val;
-	else
-		fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size/2 -1) |
-			TX_WMARK(fifo_size/2);
-	dwmci_writel(host, DWMCI_FIFOTH, fifoth_val);
+	if (!host->fifoth_val) {
+		fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
+		fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
+		host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
+			TX_WMARK(fifo_size / 2);
+	}
+	dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val);
 
 	dwmci_writel(host, DWMCI_CLKENA, 0);
 	dwmci_writel(host, DWMCI_CLKSRC, 0);
diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
index 72a31b7..4238dd9 100644
--- a/drivers/mmc/exynos_dw_mmc.c
+++ b/drivers/mmc/exynos_dw_mmc.c
@@ -19,39 +19,146 @@
  */
 
 #include <common.h>
-#include <malloc.h>
 #include <dwmmc.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <malloc.h>
 #include <asm/arch/dwmmc.h>
 #include <asm/arch/clk.h>
+#include <asm/arch/pinmux.h>
 
-static char *EXYNOS_NAME = "EXYNOS DWMMC";
+#define	DWMMC_MAX_CH_NUM		4
+#define	DWMMC_MAX_FREQ			52000000
+#define	DWMMC_MIN_FREQ			400000
+#define	DWMMC_MMC0_CLKSEL_VAL		0x03030001
+#define	DWMMC_MMC2_CLKSEL_VAL		0x03020001
 
+/*
+ * Function used as callback function to initialise the
+ * CLKSEL register for every mmc channel.
+ */
 static void exynos_dwmci_clksel(struct dwmci_host *host)
 {
-	u32 val;
-	val = DWMCI_SET_SAMPLE_CLK(DWMCI_SHIFT_0) |
-		DWMCI_SET_DRV_CLK(DWMCI_SHIFT_0) | DWMCI_SET_DIV_RATIO(0);
+	dwmci_writel(host, DWMCI_CLKSEL, host->clksel_val);
+}
 
-	dwmci_writel(host, DWMCI_CLKSEL, val);
+unsigned int exynos_dwmci_get_clk(int dev_index)
+{
+	return get_mmc_clk(dev_index);
 }
 
-int exynos_dwmci_init(u32 regbase, int bus_width, int index)
+/*
+ * This function adds the mmc channel to be registered with mmc core.
+ * index -	mmc channel number.
+ * regbase -	register base address of mmc channel specified in 'index'.
+ * bus_width -	operating bus width of mmc channel specified in 'index'.
+ * clksel -	value to be written into CLKSEL register in case of FDT.
+ *		NULL in case od non-FDT.
+ */
+int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
 {
 	struct dwmci_host *host = NULL;
+	unsigned int div;
+	unsigned long freq, sclk;
 	host = malloc(sizeof(struct dwmci_host));
 	if (!host) {
 		printf("dwmci_host malloc fail!\n");
 		return 1;
 	}
+	/* request mmc clock vlaue of 52MHz.  */
+	freq = 52000000;
+	sclk = get_mmc_clk(index);
+	div = DIV_ROUND_UP(sclk, freq);
+	/* set the clock divisor for mmc */
+	set_mmc_clk(index, div);
 
-	host->name = EXYNOS_NAME;
+	host->name = "EXYNOS DWMMC";
 	host->ioaddr = (void *)regbase;
 	host->buswidth = bus_width;
+
+	if (clksel) {
+		host->clksel_val = clksel;
+	} else {
+		if (0 == index)
+			host->clksel_val = DWMMC_MMC0_CLKSEL_VAL;
+		if (2 == index)
+			host->clksel_val = DWMMC_MMC2_CLKSEL_VAL;
+	}
+
 	host->clksel = exynos_dwmci_clksel;
 	host->dev_index = index;
+	host->mmc_clk = exynos_dwmci_get_clk;
+	/* Add the mmc channel to be registered with mmc core */
+	if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) {
+		debug("dwmmc%d registration failed\n", index);
+		return -1;
+	}
+	return 0;
+}
+
+#ifdef CONFIG_OF_CONTROL
+int exynos_dwmmc_init(const void *blob)
+{
+	int index, bus_width;
+	int node_list[DWMMC_MAX_CH_NUM];
+	int err = 0, dev_id, flag, count, i;
+	u32 clksel_val, base, timing[3];
+
+	count = fdtdec_find_aliases_for_id(blob, "mmc",
+				COMPAT_SAMSUNG_EXYNOS5_DWMMC, node_list,
+				DWMMC_MAX_CH_NUM);
+
+	for (i = 0; i < count; i++) {
+		int node = node_list[i];
+
+		if (node <= 0)
+			continue;
 
-	add_dwmci(host, 52000000, 400000);
+		/* Extract device id for each mmc channel */
+		dev_id = pinmux_decode_periph_id(blob, node);
 
+		/* Get the bus width from the device node */
+		bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
+		if (bus_width <= 0) {
+			debug("DWMMC: Can't get bus-width\n");
+			return -1;
+		}
+		if (8 == bus_width)
+			flag = PINMUX_FLAG_8BIT_MODE;
+		else
+			flag = PINMUX_FLAG_NONE;
+
+		/* config pinmux for each mmc channel */
+		err = exynos_pinmux_config(dev_id, flag);
+		if (err) {
+			debug("DWMMC not configured\n");
+			return err;
+		}
+
+		index = dev_id - PERIPH_ID_SDMMC0;
+
+		/* Get the base address from the device node */
+		base = fdtdec_get_addr(blob, node, "reg");
+		if (!base) {
+			debug("DWMMC: Can't get base address\n");
+			return -1;
+		}
+		/* Extract the timing info from the node */
+		err = fdtdec_get_int_array(blob, node, "samsung,timing",
+					timing, 3);
+		if (err) {
+			debug("Can't get sdr-timings for divider\n");
+			return -1;
+		}
+
+		clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
+				DWMCI_SET_DRV_CLK(timing[1]) |
+				DWMCI_SET_DIV_RATIO(timing[2]));
+		/* Initialise each mmc channel */
+		err = exynos_dwmci_add_port(index, base, bus_width, clksel_val);
+		if (err)
+			debug("dwmmc Channel-%d init failed\n", index);
+	}
 	return 0;
 }
-
+#endif
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 0a2f535..a492bbb 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1447,3 +1447,137 @@ int mmc_initialize(bd_t *bis)
 	do_preinit();
 	return 0;
 }
+
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+/*
+ * This function changes the size of boot partition and the size of rpmb
+ * partition present on EMMC devices.
+ *
+ * Input Parameters:
+ * struct *mmc: pointer for the mmc device strcuture
+ * bootsize: size of boot partition
+ * rpmbsize: size of rpmb partition
+ *
+ * Returns 0 on success.
+ */
+
+int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
+				unsigned long rpmbsize)
+{
+	int err;
+	struct mmc_cmd cmd;
+
+	/* Only use this command for raw EMMC moviNAND. Enter backdoor mode */
+	cmd.cmdidx = MMC_CMD_RES_MAN;
+	cmd.resp_type = MMC_RSP_R1b;
+	cmd.cmdarg = MMC_CMD62_ARG1;
+
+	err = mmc_send_cmd(mmc, &cmd, NULL);
+	if (err) {
+		debug("mmc_boot_partition_size_change: Error1 = %d\n", err);
+		return err;
+	}
+
+	/* Boot partition changing mode */
+	cmd.cmdidx = MMC_CMD_RES_MAN;
+	cmd.resp_type = MMC_RSP_R1b;
+	cmd.cmdarg = MMC_CMD62_ARG2;
+
+	err = mmc_send_cmd(mmc, &cmd, NULL);
+	if (err) {
+		debug("mmc_boot_partition_size_change: Error2 = %d\n", err);
+		return err;
+	}
+	/* boot partition size is multiple of 128KB */
+	bootsize = (bootsize * 1024) / 128;
+
+	/* Arg: boot partition size */
+	cmd.cmdidx = MMC_CMD_RES_MAN;
+	cmd.resp_type = MMC_RSP_R1b;
+	cmd.cmdarg = bootsize;
+
+	err = mmc_send_cmd(mmc, &cmd, NULL);
+	if (err) {
+		debug("mmc_boot_partition_size_change: Error3 = %d\n", err);
+		return err;
+	}
+	/* RPMB partition size is multiple of 128KB */
+	rpmbsize = (rpmbsize * 1024) / 128;
+	/* Arg: RPMB partition size */
+	cmd.cmdidx = MMC_CMD_RES_MAN;
+	cmd.resp_type = MMC_RSP_R1b;
+	cmd.cmdarg = rpmbsize;
+
+	err = mmc_send_cmd(mmc, &cmd, NULL);
+	if (err) {
+		debug("mmc_boot_partition_size_change: Error4 = %d\n", err);
+		return err;
+	}
+	return 0;
+}
+
+/*
+ * This function shall form and send the commands to open / close the
+ * boot partition specified by user.
+ *
+ * Input Parameters:
+ * ack: 0x0 - No boot acknowledge sent (default)
+ *	0x1 - Boot acknowledge sent during boot operation
+ * part_num: User selects boot data that will be sent to master
+ *	0x0 - Device not boot enabled (default)
+ *	0x1 - Boot partition 1 enabled for boot
+ *	0x2 - Boot partition 2 enabled for boot
+ * access: User selects partitions to access
+ *	0x0 : No access to boot partition (default)
+ *	0x1 : R/W boot partition 1
+ *	0x2 : R/W boot partition 2
+ *	0x3 : R/W Replay Protected Memory Block (RPMB)
+ *
+ * Returns 0 on success.
+ */
+int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access)
+{
+	int err;
+	struct mmc_cmd cmd;
+
+	/* Boot ack enable, boot partition enable , boot partition access */
+	cmd.cmdidx = MMC_CMD_SWITCH;
+	cmd.resp_type = MMC_RSP_R1b;
+
+	cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+			(EXT_CSD_PART_CONF << 16) |
+			((EXT_CSD_BOOT_ACK(ack) |
+			EXT_CSD_BOOT_PART_NUM(part_num) |
+			EXT_CSD_PARTITION_ACCESS(access)) << 8);
+
+	err = mmc_send_cmd(mmc, &cmd, NULL);
+	if (err) {
+		if (access) {
+			debug("mmc boot partition#%d open fail:Error1 = %d\n",
+			      part_num, err);
+		} else {
+			debug("mmc boot partition#%d close fail:Error = %d\n",
+			      part_num, err);
+		}
+		return err;
+	}
+
+	if (access) {
+		/* 4bit transfer mode at booting time. */
+		cmd.cmdidx = MMC_CMD_SWITCH;
+		cmd.resp_type = MMC_RSP_R1b;
+
+		cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
+				(EXT_CSD_BOOT_BUS_WIDTH << 16) |
+				((1 << 0) << 8);
+
+		err = mmc_send_cmd(mmc, &cmd, NULL);
+		if (err) {
+			debug("mmc boot partition#%d open fail:Error2 = %d\n",
+			      part_num, err);
+			return err;
+		}
+	}
+	return 0;
+}
+#endif
diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
index 90f8392..ecbb210 100644
--- a/drivers/mtd/spi/Makefile
+++ b/drivers/mtd/spi/Makefile
@@ -32,6 +32,7 @@ endif
 COBJS-$(CONFIG_SPI_FLASH)	+= spi_flash.o
 COBJS-$(CONFIG_SPI_FLASH_ATMEL)	+= atmel.o
 COBJS-$(CONFIG_SPI_FLASH_EON)	+= eon.o
+COBJS-$(CONFIG_SPI_FLASH_GIGADEVICE)	+= gigadevice.o
 COBJS-$(CONFIG_SPI_FLASH_MACRONIX)	+= macronix.o
 COBJS-$(CONFIG_SPI_FLASH_SPANSION)	+= spansion.o
 COBJS-$(CONFIG_SPI_FLASH_SST)	+= sst.o
diff --git a/drivers/mtd/spi/gigadevice.c b/drivers/mtd/spi/gigadevice.c
new file mode 100644
index 0000000..b5e1ebe
--- /dev/null
+++ b/drivers/mtd/spi/gigadevice.c
@@ -0,0 +1,81 @@
+/*
+ * Gigadevice SPI flash driver
+ * Copyright 2013, Samsung Electronics Co., Ltd.
+ * Author: Banajit Goswami <banajit.g@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi_flash.h>
+
+#include "spi_flash_internal.h"
+
+struct gigadevice_spi_flash_params {
+	uint16_t	id;
+	uint16_t	nr_blocks;
+	const char	*name;
+};
+
+static const struct gigadevice_spi_flash_params gigadevice_spi_flash_table[] = {
+	{
+		.id			= 0x6016,
+		.nr_blocks		= 64,
+		.name			= "GD25LQ",
+	},
+	{
+		.id			= 0x4017,
+		.nr_blocks		= 128,
+		.name			= "GD25Q64B",
+	},
+};
+
+struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode)
+{
+	const struct gigadevice_spi_flash_params *params;
+	struct spi_flash *flash;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(gigadevice_spi_flash_table); i++) {
+		params = &gigadevice_spi_flash_table[i];
+		if (params->id == ((idcode[1] << 8) | idcode[2]))
+			break;
+	}
+
+	if (i == ARRAY_SIZE(gigadevice_spi_flash_table)) {
+		debug("SF: Unsupported Gigadevice ID %02x%02x\n",
+				idcode[1], idcode[2]);
+		return NULL;
+	}
+
+	flash = spi_flash_alloc_base(spi, params->name);
+	if (!flash) {
+		debug("SF: Failed to allocate memory\n");
+		return NULL;
+	}
+	/* page_size */
+	flash->page_size = 256;
+	/* sector_size = page_size * pages_per_sector */
+	flash->sector_size = flash->page_size * 16;
+	/* size = sector_size * sector_per_block * number of blocks */
+	flash->size = flash->sector_size * 16 * params->nr_blocks;
+
+	return flash;
+}
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 111185a..6507aa3 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -346,6 +346,9 @@ static const struct {
 #ifdef CONFIG_SPI_FLASH_EON
 	{ 0, 0x1c, spi_flash_probe_eon, },
 #endif
+#ifdef CONFIG_SPI_FLASH_GIGADEVICE
+	{ 0, 0xc8, spi_flash_probe_gigadevice, },
+#endif
 #ifdef CONFIG_SPI_FLASH_MACRONIX
 	{ 0, 0xc2, spi_flash_probe_macronix, },
 #endif
diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h
index 141cfa8..e0afbc3 100644
--- a/drivers/mtd/spi/spi_flash_internal.h
+++ b/drivers/mtd/spi/spi_flash_internal.h
@@ -106,3 +106,4 @@ struct spi_flash *spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode);
 struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode);
 struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode);
 struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode);
+struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode);
diff --git a/drivers/power/exynos-tmu.c b/drivers/power/exynos-tmu.c
index d4b3e65..9a093a5 100644
--- a/drivers/power/exynos-tmu.c
+++ b/drivers/power/exynos-tmu.c
@@ -50,15 +50,15 @@
 /* Tmeperature threshold values for various thermal events */
 struct temperature_params {
 	/* minimum value in temperature code range */
-	unsigned int min_val;
+	unsigned min_val;
 	/* maximum value in temperature code range */
-	unsigned int max_val;
+	unsigned max_val;
 	/* temperature threshold to start warning */
-	unsigned int start_warning;
+	unsigned start_warning;
 	/* temperature threshold CPU tripping */
-	unsigned int start_tripping;
+	unsigned start_tripping;
 	/* temperature threshold for HW tripping */
-	unsigned int hardware_tripping;
+	unsigned hardware_tripping;
 };
 
 /* Pre-defined values and thresholds for calibration of current temperature */
@@ -66,25 +66,27 @@ struct tmu_data {
 	/* pre-defined temperature thresholds */
 	struct temperature_params ts;
 	/* pre-defined efuse range minimum value */
-	unsigned int efuse_min_value;
+	unsigned efuse_min_value;
 	/* pre-defined efuse value for temperature calibration */
-	unsigned int efuse_value;
+	unsigned efuse_value;
 	/* pre-defined efuse range maximum value */
-	unsigned int efuse_max_value;
+	unsigned efuse_max_value;
 	/* current temperature sensing slope */
-	unsigned int slope;
+	unsigned slope;
 };
 
 /* TMU device specific details and status */
 struct tmu_info {
 	/* base Address for the TMU */
-	unsigned tmu_base;
+	struct exynos5_tmu_reg *tmu_base;
+	/* mux Address for the TMU */
+	int tmu_mux;
 	/* pre-defined values for calibration and thresholds */
 	struct tmu_data data;
 	/* value required for triminfo_25 calibration */
-	unsigned int te1;
+	unsigned te1;
 	/* value required for triminfo_85 calibration */
-	unsigned int te2;
+	unsigned te2;
 	/* Value for measured data calibration */
 	int dc_value;
 	/* enum value indicating status of the TMU */
@@ -103,17 +105,24 @@ static struct tmu_info gbl_info;
  */
 static int get_cur_temp(struct tmu_info *info)
 {
-	int cur_temp;
-	struct exynos5_tmu_reg *reg = (struct exynos5_tmu_reg *)info->tmu_base;
+	struct exynos5_tmu_reg *reg = info->tmu_base;
+	ulong start;
+	int cur_temp = 0;
 
 	/*
 	 * Temperature code range between min 25 and max 125.
 	 * May run more than once for first call as initial sensing
 	 * has not yet happened.
 	 */
-	do {
-		cur_temp = readl(&reg->current_temp) & 0xff;
-	} while (cur_temp == 0 && info->tmu_state == TMU_STATUS_NORMAL);
+	if (info->tmu_state == TMU_STATUS_NORMAL) {
+		start = get_timer(0);
+		do {
+			cur_temp = readl(&reg->current_temp) & 0xff;
+		} while ((cur_temp == 0) || (get_timer(start) > 100));
+	}
+
+	if (cur_temp == 0)
+		return cur_temp;
 
 	/* Calibrate current temperature */
 	cur_temp = cur_temp - info->te1 + info->dc_value;
@@ -137,23 +146,29 @@ enum tmu_status_t tmu_monitor(int *temp)
 
 	/* Read current temperature of the SOC */
 	cur_temp = get_cur_temp(&gbl_info);
+
+	if (!cur_temp)
+		goto out;
+
 	*temp = cur_temp;
 
 	/* Temperature code lies between min 25 and max 125 */
-	if (cur_temp >= data->ts.start_tripping &&
-			cur_temp <= data->ts.max_val) {
+	if ((cur_temp >= data->ts.start_tripping) &&
+	    (cur_temp <= data->ts.max_val))
 		return TMU_STATUS_TRIPPED;
-	} else if (cur_temp >= data->ts.start_warning) {
+
+	if (cur_temp >= data->ts.start_warning)
 		return TMU_STATUS_WARNING;
-	} else if (cur_temp < data->ts.start_warning &&
-			cur_temp >= data->ts.min_val) {
+
+	if ((cur_temp < data->ts.start_warning) &&
+	    (cur_temp >= data->ts.min_val))
 		return TMU_STATUS_NORMAL;
-	} else {
-		/* Temperature code does not lie between min 25 and max 125 */
-		gbl_info.tmu_state = TMU_STATUS_INIT;
-		debug("EXYNOS_TMU: Thermal reading failed\n");
-		return TMU_STATUS_INIT;
-	}
+
+ out:
+	/* Temperature code does not lie between min 25 and max 125 */
+	gbl_info.tmu_state = TMU_STATUS_INIT;
+	debug("EXYNOS_TMU: Thermal reading failed\n");
+	return TMU_STATUS_INIT;
 }
 
 /*
@@ -166,6 +181,7 @@ enum tmu_status_t tmu_monitor(int *temp)
 static int get_tmu_fdt_values(struct tmu_info *info, const void *blob)
 {
 #ifdef CONFIG_OF_CONTROL
+	fdt_addr_t addr;
 	int node;
 	int error = 0;
 
@@ -183,46 +199,58 @@ static int get_tmu_fdt_values(struct tmu_info *info, const void *blob)
 	 * miscalculation of register values in tmu_setup_parameters
 	 * may result in misleading current temperature.
 	 */
-	info->tmu_base = fdtdec_get_addr(blob, node, "reg");
-	if (info->tmu_base == FDT_ADDR_T_NONE) {
+	addr = fdtdec_get_addr(blob, node, "reg");
+	if (addr == FDT_ADDR_T_NONE) {
 		debug("%s: Missing tmu-base\n", __func__);
 		return -1;
 	}
+	info->tmu_base = (struct exynos5_tmu_reg *)addr;
+
+	/* Optional field. */
+	info->tmu_mux = fdtdec_get_int(blob,
+				node, "samsung,mux", -1);
+	/* Take default value as per the user manual b(110) */
+	if (info->tmu_mux == -1)
+		info->tmu_mux = 0x6;
+
 	info->data.ts.min_val = fdtdec_get_int(blob,
 				node, "samsung,min-temp", -1);
-	error |= info->data.ts.min_val;
+	error |= (info->data.ts.min_val == -1);
 	info->data.ts.max_val = fdtdec_get_int(blob,
 				node, "samsung,max-temp", -1);
-	error |= info->data.ts.max_val;
+	error |= (info->data.ts.max_val == -1);
 	info->data.ts.start_warning = fdtdec_get_int(blob,
 				node, "samsung,start-warning", -1);
-	error |= info->data.ts.start_warning;
+	error |= (info->data.ts.start_warning == -1);
 	info->data.ts.start_tripping = fdtdec_get_int(blob,
 				node, "samsung,start-tripping", -1);
-	error |= info->data.ts.start_tripping;
+	error |= (info->data.ts.start_tripping == -1);
 	info->data.ts.hardware_tripping = fdtdec_get_int(blob,
 				node, "samsung,hw-tripping", -1);
-	error |= info->data.ts.hardware_tripping;
+	error |= (info->data.ts.hardware_tripping == -1);
 	info->data.efuse_min_value = fdtdec_get_int(blob,
 				node, "samsung,efuse-min-value", -1);
-	error |= info->data.efuse_min_value;
+	error |= (info->data.efuse_min_value == -1);
 	info->data.efuse_value = fdtdec_get_int(blob,
 				node, "samsung,efuse-value", -1);
-	error |= info->data.efuse_value;
+	error |= (info->data.efuse_value == -1);
 	info->data.efuse_max_value = fdtdec_get_int(blob,
 				node, "samsung,efuse-max-value", -1);
-	error |= info->data.efuse_max_value;
+	error |= (info->data.efuse_max_value == -1);
 	info->data.slope = fdtdec_get_int(blob,
 				node, "samsung,slope", -1);
-	error |= info->data.slope;
+	error |= (info->data.slope == -1);
 	info->dc_value = fdtdec_get_int(blob,
 				node, "samsung,dc-value", -1);
-	error |= info->dc_value;
+	error |= (info->dc_value == -1);
 
-	if (error == -1) {
+	if (error) {
 		debug("fail to get tmu node properties\n");
 		return -1;
 	}
+#else
+	/* Non DT support may never be added. Just in case  */
+	return -1;
 #endif
 
 	return 0;
@@ -236,12 +264,12 @@ static int get_tmu_fdt_values(struct tmu_info *info, const void *blob)
  */
 static void tmu_setup_parameters(struct tmu_info *info)
 {
-	unsigned int te_code, con;
-	unsigned int warning_code, trip_code, hwtrip_code;
-	unsigned int cooling_temp;
-	unsigned int rising_value;
+	unsigned te_code, con;
+	unsigned warning_code, trip_code, hwtrip_code;
+	unsigned cooling_temp;
+	unsigned rising_value;
 	struct tmu_data *data = &info->data;
-	struct exynos5_tmu_reg *reg = (struct exynos5_tmu_reg *)info->tmu_base;
+	struct exynos5_tmu_reg *reg = info->tmu_base;
 
 	/* Must reload for reading efuse value from triminfo register */
 	writel(TRIMINFO_RELOAD, &reg->triminfo_control);
@@ -288,7 +316,7 @@ static void tmu_setup_parameters(struct tmu_info *info)
 
 	/* TMU core enable */
 	con = readl(&reg->tmu_control);
-	con |= THERM_TRIP_EN | CORE_EN;
+	con |= THERM_TRIP_EN | CORE_EN | (info->tmu_mux << 20);
 
 	writel(con, &reg->tmu_control);
 
@@ -314,6 +342,5 @@ int tmu_init(const void *blob)
 	tmu_setup_parameters(&gbl_info);
 	gbl_info.tmu_state = TMU_STATUS_NORMAL;
 ret:
-
 	return gbl_info.tmu_state;
 }
diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c
index 3c41242..e65125c 100644
--- a/drivers/serial/serial_s5p.c
+++ b/drivers/serial/serial_s5p.c
@@ -30,6 +30,10 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#define RX_FIFO_COUNT_MASK	0xff
+#define RX_FIFO_FULL_MASK	(1 << 8)
+#define TX_FIFO_FULL_MASK	(1 << 24)
+
 static inline struct s5p_uart *s5p_get_base_uart(int dev_index)
 {
 	u32 offset = dev_index * sizeof(struct s5p_uart);
@@ -87,8 +91,8 @@ int serial_init_dev(const int dev_index)
 {
 	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
 
-	/* reset and enable FIFOs, set triggers to the maximum */
-	writel(0, &uart->ufcon);
+	/* enable FIFOs */
+	writel(0x1, &uart->ufcon);
 	writel(0, &uart->umcon);
 	/* 8N1 */
 	writel(0x3, &uart->ulcon);
@@ -130,7 +134,8 @@ int serial_getc_dev(const int dev_index)
 	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
 
 	/* wait for character to arrive */
-	while (!(readl(&uart->utrstat) & 0x1)) {
+	while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
+					 RX_FIFO_FULL_MASK))) {
 		if (serial_err_check(dev_index, 0))
 			return 0;
 	}
@@ -146,7 +151,7 @@ void serial_putc_dev(const char c, const int dev_index)
 	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
 
 	/* wait for room in the tx FIFO */
-	while (!(readl(&uart->utrstat) & 0x2)) {
+	while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
 		if (serial_err_check(dev_index, 1))
 			return;
 	}
diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c
index ed0823b..c3606d5 100644
--- a/drivers/video/exynos_fb.c
+++ b/drivers/video/exynos_fb.c
@@ -319,10 +319,10 @@ void lcd_ctrl_init(void *lcdbase)
 #ifdef CONFIG_OF_CONTROL
 	if (exynos_fimd_parse_dt(gd->fdt_blob))
 		debug("Can't get proper panel info\n");
-#endif
+#else
 	/* initialize parameters which is specific to panel. */
 	init_panel_info(&panel_info);
-
+#endif
 	panel_width = panel_info.vl_width;
 	panel_height = panel_info.vl_height;
 
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 8a82892..9b97d4f 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -93,13 +93,15 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	EXYNOS_DEVICE_SETTINGS
 
-#define TZPC_BASE_OFFSET		0x10000
-
 /* SD/MMC configuration */
 #define CONFIG_GENERIC_MMC
 #define CONFIG_MMC
 #define CONFIG_SDHCI
 #define CONFIG_S5P_SDHCI
+#define CONFIG_DWMMC
+#define CONFIG_EXYNOS_DWMMC
+#define CONFIG_SUPPORT_EMMC_BOOT
+
 
 #define CONFIG_BOARD_EARLY_INIT_F
 
@@ -232,6 +234,10 @@
 #define SPI_FLASH_UBOOT_POS		(CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
 
 #define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_PART
+#define CONFIG_PARTITION_UUIDS
+
 
 #define CONFIG_IRAM_STACK	0x02050000
 
@@ -262,6 +268,7 @@
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_SPI
 #define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SPI_FLASH_GIGADEVICE
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 #define CONFIG_SF_DEFAULT_SPEED		50000000
 #define EXYNOS5_SPI_NUM_CONTROLLERS	5
diff --git a/include/configs/origen.h b/include/configs/origen.h
index ff2b24d..e179911 100644
--- a/include/configs/origen.h
+++ b/include/configs/origen.h
@@ -96,6 +96,8 @@
 #define CONFIG_SPL
 #define COPY_BL2_FNPTR_ADDR	0x02020030
 
+#define CONFIG_SPL_TEXT_BASE	0x02021410
+
 #define CONFIG_BOOTCOMMAND	"fatload mmc 0 40007000 uImage; bootm 40007000"
 
 /* Miscellaneous configurable options */
diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h
index b796b46..5e43066 100644
--- a/include/configs/smdkv310.h
+++ b/include/configs/smdkv310.h
@@ -95,6 +95,8 @@
 #define CONFIG_SPL
 #define COPY_BL2_FNPTR_ADDR	0x00002488
 
+#define CONFIG_SPL_TEXT_BASE	0x02021410
+
 #define CONFIG_BOOTCOMMAND	"fatload mmc 0 40007000 uImage; bootm 40007000"
 
 /* Miscellaneous configurable options */
diff --git a/include/configs/trats.h b/include/configs/trats.h
index fd58558..c70838b 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -146,7 +146,8 @@
 
 #define CONFIG_DFU_ALT \
 	"u-boot mmc 80 400;" \
-	"uImage ext4 0 2\0" \
+	"uImage ext4 0 2;" \
+	"exynos4210-trats.dtb ext4 0 2\0"
 
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
@@ -154,7 +155,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"bootk=" \
-		"run loaduimage; bootm 0x40007FC0\0" \
+		"run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \
 	"updatemmc=" \
 		"mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
 		"mmc boot 0 1 1 0\0" \
@@ -177,7 +178,7 @@
 	"mmcboot=" \
 		"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 		"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
-		"run loaduimage; bootm 0x40007FC0\0" \
+		"run loaddtb; run loaduimage; bootm 0x40007FC0 - ${fdtaddr}\0" \
 	"bootchart=setenv opts init=/sbin/bootchartd; run bootcmd\0" \
 	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
 	"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
@@ -188,6 +189,8 @@
 	"nfsroot=/nfsroot/arm\0" \
 	"bootblock=" CONFIG_BOOTBLOCK "\0" \
 	"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
+	"loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr}" \
+		"${fdtfile}\0" \
 	"mmcdev=0\0" \
 	"mmcbootpart=2\0" \
 	"mmcrootpart=5\0" \
@@ -212,7 +215,10 @@
 		   " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
 		   "setenv spl_imgsize;" \
 		   "setenv spl_imgaddr;" \
-		   "setenv spl_addr_tmp;\0"
+		   "setenv spl_addr_tmp;\0" \
+	"fdtaddr=40800000\0" \
+	"fdtfile=exynos4210-trats.dtb\0"
+
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
@@ -322,4 +328,7 @@
 #define CONFIG_USB_GADGET_MASS_STORAGE
 #endif
 
+/* Pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT    1
+
 #endif	/* __CONFIG_H */
diff --git a/include/dwmmc.h b/include/dwmmc.h
index c8b1d40..e142f3e 100644
--- a/include/dwmmc.h
+++ b/include/dwmmc.h
@@ -123,6 +123,8 @@
 #define MSIZE(x)		((x) << 28)
 #define RX_WMARK(x)		((x) << 16)
 #define TX_WMARK(x)		(x)
+#define RX_WMARK_SHIFT		16
+#define RX_WMARK_MASK		(0xfff << RX_WMARK_SHIFT)
 
 #define DWMCI_IDMAC_OWN		(1 << 31)
 #define DWMCI_IDMAC_CH		(1 << 4)
@@ -144,6 +146,7 @@ struct dwmci_host {
 	unsigned int bus_hz;
 	int dev_index;
 	int buswidth;
+	u32 clksel_val;
 	u32 fifoth_val;
 	struct mmc *mmc;
 
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 4e8032b..bc3b89b 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -89,6 +89,7 @@ enum fdt_compat_id {
 	COMPAT_SAMSUNG_EXYNOS_TMU,	/* Exynos TMU */
 	COMPAT_SAMSUNG_EXYNOS_FIMD,	/* Exynos Display controller */
 	COMPAT_SAMSUNG_EXYNOS5_DP,	/* Exynos Display port controller */
+	COMPAT_SAMSUNG_EXYNOS5_DWMMC,	/* Exynos5 DWMMC controller */
 	COMPAT_MAXIM_MAX77686_PMIC,	/* MAX77686 PMIC */
 	COMPAT_GENERIC_SPI_FLASH,	/* Generic SPI Flash chip */
 	COMPAT_MAXIM_98095_CODEC,	/* MAX98095 Codec */
diff --git a/include/mmc.h b/include/mmc.h
index 566db59..f88f672 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -93,6 +93,11 @@
 #define MMC_CMD_APP_CMD			55
 #define MMC_CMD_SPI_READ_OCR		58
 #define MMC_CMD_SPI_CRC_ON_OFF		59
+#define MMC_CMD_RES_MAN			62
+
+#define MMC_CMD62_ARG1			0xefac62ec
+#define MMC_CMD62_ARG2			0xcbaea7
+
 
 #define SD_CMD_SEND_RELATIVE_ADDR	3
 #define SD_CMD_SWITCH_FUNC		6
@@ -160,6 +165,7 @@
  */
 #define EXT_CSD_PARTITIONING_SUPPORT	160	/* RO */
 #define EXT_CSD_ERASE_GROUP_DEF		175	/* R/W */
+#define EXT_CSD_BOOT_BUS_WIDTH		177
 #define EXT_CSD_PART_CONF		179	/* R/W */
 #define EXT_CSD_BUS_WIDTH		183	/* R/W */
 #define EXT_CSD_HS_TIMING		185	/* R/W */
@@ -184,6 +190,16 @@
 #define EXT_CSD_BUS_WIDTH_4	1	/* Card is in 4 bit mode */
 #define EXT_CSD_BUS_WIDTH_8	2	/* Card is in 8 bit mode */
 
+#define EXT_CSD_BOOT_ACK_ENABLE			(1 << 6)
+#define EXT_CSD_BOOT_PARTITION_ENABLE		(1 << 3)
+#define EXT_CSD_PARTITION_ACCESS_ENABLE		(1 << 0)
+#define EXT_CSD_PARTITION_ACCESS_DISABLE	(0 << 0)
+
+#define EXT_CSD_BOOT_ACK(x)		(x << 6)
+#define EXT_CSD_BOOT_PART_NUM(x)	(x << 3)
+#define EXT_CSD_PARTITION_ACCESS(x)	(x << 0)
+
+
 #define R1_ILLEGAL_COMMAND		(1 << 22)
 #define R1_APP_CMD			(1 << 5)
 
@@ -211,6 +227,11 @@
 /* Maximum block size for MMC */
 #define MMC_MAX_BLOCK_LEN	512
 
+/* The number of MMC physical partitions.  These consist of:
+ * boot partitions (2), general purpose partitions (4) in MMC v4.4.
+ */
+#define MMC_NUM_BOOT_PARTITION	2
+
 struct mmc_cid {
 	unsigned long psn;
 	unsigned short oid;
@@ -291,6 +312,11 @@ int mmc_switch_part(int dev_num, unsigned int part_num);
 int mmc_getcd(struct mmc *mmc);
 int mmc_getwp(struct mmc *mmc);
 void spl_mmc_load(void) __noreturn;
+/* Function to change the size of boot partition and rpmb partitions */
+int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
+					unsigned long rpmbsize);
+/* Function to send commands to open/close the specified boot partition */
+int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access);
 
 /**
  * Start device initialization and return immediately; it does not block on
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index ac1fe0b..e3142cb 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -62,6 +62,7 @@ static const char * const compat_names[COMPAT_COUNT] = {
 	COMPAT(SAMSUNG_EXYNOS_TMU, "samsung,exynos-tmu"),
 	COMPAT(SAMSUNG_EXYNOS_FIMD, "samsung,exynos-fimd"),
 	COMPAT(SAMSUNG_EXYNOS5_DP, "samsung,exynos5-dp"),
+	COMPAT(SAMSUNG_EXYNOS5_DWMMC, "samsung,exynos5250-dwmmc"),
 	COMPAT(MAXIM_MAX77686_PMIC, "maxim,max77686_pmic"),
 	COMPAT(GENERIC_SPI_FLASH, "spi-flash"),
 	COMPAT(MAXIM_98095_CODEC, "maxim,max98095-codec"),
diff --git a/spl/Makefile b/spl/Makefile
index d8fe948..01873de 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -98,6 +98,14 @@ LIBS-y += arch/$(ARCH)/cpu/tegra-common/libcputegra-common.o
 LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o
 endif
 
+ifneq ($(CONFIG_MX23)$(CONFIG_MX35),)
+LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o
+endif
+
+ifeq ($(SOC),exynos)
+LIBS-y += $(CPUDIR)/s5p-common/libs5p-common.o
+endif
+
 # Add GCC lib
 ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
 PLATFORM_LIBGCC = $(SPLTREE)/arch/$(ARCH)/lib/libgcc.o