summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRajashekhara, Sudhakar <sudhakar.raj@ti.com>2012-06-24 21:35:16 +0000
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2012-09-01 14:58:09 +0200
commit6652c62e0146411ea2b38fb36336915ffdba99de (patch)
tree11c7ebefc8a41933304d4ada30cbb822e3874910
parentecc98ec18c5b23b399e4aa12d252b719ea4aedb1 (diff)
downloadu-boot-imx-6652c62e0146411ea2b38fb36336915ffdba99de.zip
u-boot-imx-6652c62e0146411ea2b38fb36336915ffdba99de.tar.gz
u-boot-imx-6652c62e0146411ea2b38fb36336915ffdba99de.tar.bz2
da850/omap-l138: modifications for Logic PD Rev.3 AM18xx EVM
AHCLKR/UART1_RTS/GP0[11] pin needs to be configured for MMC and NOR to work on DA850/OMAP-L138 Rev.3 EVM. When GP0[11] is low, the SD0 interface will not work, but NOR flash will. When GP0[11] is high, SD0 will work but NOR flash will not. Tested-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Hadli, Manjunath <manjunath.hadli@ti.com>
-rw-r--r--board/davinci/da8xxevm/da850evm.c12
1 files changed, 11 insertions, 1 deletions
diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
index 88337ff..152a524 100644
--- a/board/davinci/da8xxevm/da850evm.c
+++ b/board/davinci/da8xxevm/da850evm.c
@@ -335,7 +335,7 @@ int board_early_init_f(void)
int board_init(void)
{
-#ifdef CONFIG_USE_NOR
+#if defined(CONFIG_USE_NOR) || defined(CONFIG_DAVINCI_MMC)
u32 val;
#endif
@@ -386,6 +386,16 @@ int board_init(void)
writel(val, GPIO_BANK0_REG_CLR_ADDR);
#endif
+#ifdef CONFIG_DAVINCI_MMC
+ /* Set the GPIO direction as output */
+ clrbits_le32((u32 *)GPIO_BANK0_REG_DIR_ADDR, (0x01 << 11));
+
+ /* Set the output as high */
+ val = readl(GPIO_BANK0_REG_SET_ADDR);
+ val |= (0x01 << 11);
+ writel(val, GPIO_BANK0_REG_SET_ADDR);
+#endif
+
#ifdef CONFIG_DRIVER_TI_EMAC
davinci_emac_mii_mode_sel(HAS_RMII);
#endif /* CONFIG_DRIVER_TI_EMAC */