summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2007-05-24 08:22:09 +0200
committerStefan Roese <sr@denx.de>2007-05-24 08:22:09 +0200
commit5d4a179013d59a76446462e1eb0a969fba63eb81 (patch)
tree2092dcd7ad5b633e95bbcc047212cc6ba1975cc0
parent9f0077abd69f7a7c756a915b961037302be3e6f2 (diff)
downloadu-boot-imx-5d4a179013d59a76446462e1eb0a969fba63eb81.zip
u-boot-imx-5d4a179013d59a76446462e1eb0a969fba63eb81.tar.gz
u-boot-imx-5d4a179013d59a76446462e1eb0a969fba63eb81.tar.bz2
ppc4xx: Update AMCC Acadia support for board revision 1.1
This patch updates the Acadia (405EZ) support for the new 1.1 board revision. It also adds support for NAND FLASH via the 4xx NDFC. Please note that the jumper J7 must be in position 2-3 for this NAND support. Position 1-2 is for NAND booting only. NAND booting support will follow later. Signed-off-by: Stefan Roese <sr@denx.de>
-rw-r--r--board/amcc/acadia/acadia.c9
-rw-r--r--include/configs/acadia.h27
2 files changed, 17 insertions, 19 deletions
diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c
index baf598c..3b63c8a 100644
--- a/board/amcc/acadia/acadia.c
+++ b/board/amcc/acadia/acadia.c
@@ -62,6 +62,10 @@ int board_early_init_f(void)
acadia_gpio_init();
+ /* Configure 405EZ for NAND usage */
+ mtsdr(sdrnand0, 0x80c00000);
+ mtsdr(sdrultra0, 0x8d110000);
+
/* USB Host core needs this bit set */
mfsdr(sdrultra1, reg);
mtsdr(sdrultra1, reg | SDR_ULTRA1_LEDNENABLE);
@@ -91,8 +95,11 @@ int misc_init_f(void)
int checkboard(void)
{
char *s = getenv("serial#");
+ u8 rev;
+
+ rev = in8(CFG_CPLD_BASE + 0);
+ printf("Board: Acadia - AMCC PPC405EZ Evaluation Board, Rev. %X", rev);
- printf("Board: Acadia - AMCC PPC405EZ Evaluation Board");
if (s != NULL) {
puts(", serial# ");
puts(s);
diff --git a/include/configs/acadia.h b/include/configs/acadia.h
index 35b6a51..c72d933 100644
--- a/include/configs/acadia.h
+++ b/include/configs/acadia.h
@@ -34,7 +34,9 @@
#define CONFIG_ACADIA 1 /* Board is Acadia */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_405EZ 1 /* Specifc 405EZ support*/
-#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
+/* Detect Acadia PLL input clock automatically via CPLD bit */
+#define CONFIG_SYS_CLK_FREQ ((in8(CFG_CPLD_BASE + 0) == 0x0c) ? \
+ 66666666 : 33333000)
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_F 1 /* Call misc_init_f */
@@ -224,16 +226,6 @@
#define CONFIG_USB_OHCI
#define CONFIG_USB_STORAGE
-#if 0 /* test-only */
-#define TEST_ONLY_NAND
-#endif
-
-#ifdef TEST_ONLY_NAND
-#define CMD_NAND CFG_CMD_NAND
-#else
-#define CMD_NAND 0
-#endif
-
/* Partitions */
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
@@ -252,7 +244,7 @@
CFG_CMD_I2C | \
CFG_CMD_IRQ | \
CFG_CMD_MII | \
- CMD_NAND | \
+ CFG_CMD_NAND | \
CFG_CMD_NET | \
CFG_CMD_NFS | \
CFG_CMD_PCI | \
@@ -300,7 +292,6 @@
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-#ifdef TEST_ONLY_NAND
/*-----------------------------------------------------------------------
* NAND FLASH
*----------------------------------------------------------------------*/
@@ -308,7 +299,6 @@
#define NAND_MAX_CHIPS 1
#define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS)
#define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
-#endif
/*-----------------------------------------------------------------------
* Cache Configuration
@@ -322,7 +312,7 @@
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
*----------------------------------------------------------------------*/
-#define CFG_NAND_CS 0 /* NAND chip connected to CSx */
+#define CFG_NAND_CS 3 /* NAND chip connected to CSx */
/* Memory Bank 0 (Flash) initialization */
#define CFG_EBC_PB0AP 0x03337200
@@ -358,7 +348,8 @@
/*-----------------------------------------------------------------------
* Definitions for GPIO_0 setup (PPC405EZ specific)
*
- * GPIO0[0-3] - External Bus Controller CS_4 - CS_7 Outputs
+ * GPIO0[0-2] - External Bus Controller CS_4 - CS_6 Outputs
+ * GPIO0[3] - NAND FLASH Controller CE3 (NFCE3) Output
* GPIO0[4] - External Bus Controller Hold Input
* GPIO0[5] - External Bus Controller Priority Input
* GPIO0[6] - External Bus Controller HLDA Output
@@ -376,10 +367,10 @@
*/
#define CFG_GPIO0_TCR 0xC0000000
#define CFG_GPIO0_OSRL 0x50000000
-#define CFG_GPIO0_OSRH 0x00000055
+#define CFG_GPIO0_OSRH 0x02000055
#define CFG_GPIO0_ISR1L 0x00000000
#define CFG_GPIO0_ISR1H 0x00000055
-#define CFG_GPIO0_TSRL 0x00000000
+#define CFG_GPIO0_TSRL 0x02000000
#define CFG_GPIO0_TSRH 0x00000055
/*-----------------------------------------------------------------------